Defective TiO2 with oxygen vacancies: synthesis, properties and photocatalytic applications

Catalytic Metasurfaces Empowered by Bound States in the Continuum

Photocatalytic platforms based on ultrathin reactive materials facilitate carrier transport and extraction but are typically restricted to a narrow set of materials and spectral operating ranges due to limited absorption and poor energy-tuning possibilities. Metasurfaces, a class of 2D artificial materials based on the electromagnetic design of nanophotonic resonators, allow optical absorption engineering for a wide range of materials. Moreover, tailored resonances in nanostructured materials enable strong absorption enhancement and thus carrier multiplication. Here, we develop an ultrathin catalytic metasurface platform that leverages the combination of loss-engineered substoichiometric titanium oxide (TiO_2-x) and the emerging physical concept of optical bound states in the continuum (BICs) to boost photocatalytic activity and provide broad spectral tunability. We demonstrate that our platform reaches the condition of critical light coupling in a TiO_2-x BIC metasurface, thus providing a general framework for maximizing light-matter interactions in diverse photocatalytic materials. This approach can avoid the long-standing drawbacks of many naturally occurring semiconductor-based ultrathin films applied in photocatalysis, such as poor spectral tunability and limited absorption manipulation. Our results are broadly applicable to fields beyond photocatalysis, including photovoltaics and photodetectors.

A review on TiO2-x-based materials for photocatalytic CO2 reduction

Photocatalytic CO₂ reduction technology has a broad potential for dealing with the issues of energy shortage and global warming. As a widely studied material used in the photocatalytic process, titanium dioxide (TiO₂) has been continuously modified and tailored for more desirable application. Recently, the defective/reduced titanium dioxide (TiO_2-x) catalyst has attracted broad attention due to its excellent photocatalytic performance for CO₂ reduction. In this perspective review, we comprehensively present the recent progress in TiO_2-x-based materials for photocatalytic CO₂ reduction. In detail, the review starts with the fundamentals of CO₂ photocatalytic reduction. Then, the synthesis of a defective TiO₂ structure is introduced for the regulation of its photocatalytic performance, especially its optical properties and dissociative adsorption properties. In addition, the current application of TiO_2-x-based photocatalysts for CO₂ reduction is also highlighted, such as metal-TiO_2-x, oxide-TiO_2-x and TiO_2-x-carbon-based photocatalysts. Finally, the existing challenges and possible scope of photocatalytic CO₂ reduction over TiO_2-x-based materials are discussed. We hope that this review can provide an effective reference for the development of more efficient and reasonable photocatalysts based on TiO_2-x.

Template-Free Synthesis of g-C3N4 Nanoball/BiOCl Nanotube Heterojunction with Enhanced Photocatalytic Activity

There are many reports on g-C3N4 nanosheet and BiOCl nanosheet, but few studies on other morphologies of g-C3N4 and BiOCl. Herein, a g-C3N4 nanoball/BiOCl nanotube heterojunction prepared by a simple one-step acetonitrile solvothermal method is reported. The XRD results prove that the g-C3N4/BiOCl composites can be prepared in one step. SEM results revealed that the g-C3N4 was spherical and the BiOCl was tubular. The HRTEM results indicate that g-C3N4 has an amorphous structure and that the (100) crystal plane of BiOCl borders the g-C3N4. Spherical g-C3N4 has a narrow band gap (approximately 1.94 eV), and the band gap of g-C3N4/BiOCl after modification was also narrow. When the BiOCl accounted for 30% of the g-C3N4/BiOCl by mass, the quasi-primary reaction rate constant of RhB degradation was 45 times that of g-C3N4. This successful preparation method for optimizing g-C3N4 involving simple one-step template-free synthesis may be adopted for the preparation of diverse-shapes and high-performance nanomaterials in the future.

A Light(er) Approach for the Selective Hydrogenation of 5-Hydroxymethylfurfural to 2,5-Bis(hydroxymethyl)furan without External H2

The selective conversion of 5-hydroxymethyfurfural (HMF), a biomass-derived platform molecule, to value added chemicals can ease the burden on petroleum-based fine chemical synthesis. The active contribution of renewable energy sources along with low cost, environmental friendliness, and a simple reaction system must be adopted for better sustainability. In this context, photocatalytic selective hydrogenation of HMF to 2,5-bis(hydroxymethyl)furan (BHMF) was achieved over P25 titania nanoparticles without chemical squander. Simultaneously the photo-oxidation of p-methoxybenzyl alcohol (MeOBA) to p-methoxybenzaldehyde (MeOBaL), similar to biomass-derived vanillin, was carried out, abolishing the need of additional redox reagents. This system put forward the competent employment of photogenerated excitons for the valorization of lignocellulosic biomass to fine chemicals, which is an urgent requirement for sustainable chemical synthesis.

Fabrication of Mn-Doped SrTiO3/Carbon Fiber with Oxygen Vacancy for Enhanced Photocatalytic Hydrogen Evolution

With carbon fiber, it is difficult to load semiconductor photocatalysts and easy to shed off thanks to its smooth surface and few active groups, which has always been a problem in the synthesis of photocatalysts. In the study, SrTiO3 nanoparticles were loaded onto the Tencel fibers using the solvothermal method, and then the Tencel fibers were carbonized at a high temperature under the condition of inert gas to form carbon fibers, thus SrTiO3@CF photocatalytic composite materials with solid core shell structure were prepared. Meanwhile, Mn ions were added into the SrTiO3 precursor reagent in the solvothermal experiment to prepare Mn-doped Mn-SrTiO3@CF photocatalytic composite material. XPS and EPR tests showed that the prepared Mn-SrTiO3@CF photocatalytic composite was rich in oxygen vacancies. The existence of these oxygen vacancies formed oxygen defect states (VOs) below the conduction band, which constituted the capture center of photogenerated electrons and significantly improved the photocatalytic activity. The photocatalytic hydrogen experimental results showed that the photocatalytic hydrogen production capacity of Mn-SrTiO3@CF composite material with 5% Mn-doped was six times that of the SrTiO3@CF material, and the doping of Mn ions not only promoted the red shift of the light absorption boundary and the extension to visible light, but also improved the separation and migration efficiency of photocarriers. In the paper, the preparation method solves the difficulty of loading photocatalysts on CF and provides a new design method for the recycling of catalysts, and we improve the hydrogen production performance of photocatalysts by Mn-doped modification and the introduction of oxygen vacancies, which provides a theoretical method for the practical application of hydrogen energy.

Peroxymonosulfate activation by black TiO2 nanotube arrays under solar light: Switching the activation mechanism and enhancing catalytic activity and stability

Black TiO₂ nanotube arrays (black TNAs) suffer from the low activity and deactivation for peroxymonosulfate (PMS) activation, which limit their application in the oxidative destruction of organic pollutants in water. Here, we report an efficient, environmentally benign, and cost-effective method to enhance the catalytic activity and prevent the deactivation of black TNAs in PMS activation by utilizing solar energy. Optical absorption and electrochemical analysis and density functional theory calculations demonstrated that abundant oxygen vacancies (estimated to be 26%) on the black TNAs surface markedly improved solar light absorption and electrical conductivity and played a critical role as a catalytic active site for PMS activation. As a result, the solar light-irradiated black TNAs/PMS system exhibited the higher phenol degradation rate (k = 0.0488 min^-1) and total organic carbon (TOC) removal efficiency (~70%) compared to other TNAs systems. These results were ascribed to the switching of the reaction mechanism from non-radical mechanism to radical-involved. Black TNAs oxidized organic pollutants by mediating electron transfer from organics to PMS in the dark (i.e., a non-radical pathway). On the other hand, PMS activation under solar light irradiation involved the production of highly reactive sulfate and hydroxyl radicals (i.e., radical pathway), markedly improving the degradation and mineralization of organics. Additionally, the solar light-irradiated black TNAs showed relative pH-independence for PMS activation and durable catalytic performance without the loss of activity during the repetitive reaction cycles.

Strain Engineering: A Boosting Strategy for Photocatalysis

Whilst the photocatalytic technique is considered to be one of the most significant routes to address the energy crisis and global environmental challenges, the solar-to-chemical conversion efficiency is still far from satisfying practical industrial requirements, which can be traced to the suboptimal bandgap and electronic structure of photocatalysts. Strain engineering is a universal scheme that can finely tailor the bandgap and electronic structure of materials, hence supplying a novel avenue to boost their photocatalytic performance. Accordingly, to explore promising directions for certain breakthroughs in strained photocatalysts, an overview on the recent advances of strain engineering from the basics of strain effect, creations of strained materials, as well as characterizations and simulations of strain level is provided. Besides, the potential applications of strain engineering in photocatalysis are summarized, and a vision for the future controllable-electronic-structure photocatalysts by strain engineering is also given. Finally, perspectives on the challenges for future strain-promoted photocatalysis are discussed, placing emphasis on the creation and decoupling of strain effect, and the modification of theoretical frameworks.

Activating oxygen deficient TiO2 in the visible region by Bi2MoO6 for CO2 photoreduction to methanol

Fast photogenerated charge recombination and inappropriate bandgap for visible light driven charge generation hinders the performance of TiO₂. In this study, TiO₂ was activated for visible light driven CO₂ reduction in the presence of Bi₂MoO₆ as an electron donor. Furthermore, the introduction of oxygen vacancies resulted in enhanced CO₂ adsorption and conversion. The best catalyst gives 27.1 μmol g^-1 h^-1 methanol formation. DRIFTS was used to explain the methanol formation mechanism on oxygen deficient TiO₂.

Recent advances on inactivation of waterborne pathogenic microorganisms by (photo) electrochemical oxidation processes: Design and application strategies

Compared with other conventional water disinfection processes, (photo) electrochemical oxidation (P/ECO) processes have the characteristics of environmental friendliness, convenient installation and operation, easy control and high efficiency of inactivating waterborne pathogenic microorganisms (PMs), so that more and more research work has been focused on this topic, but there is still a huge gap between the research and practical application. Here, the research network of inactivating PMs by P/ECO processes has been comprehensively summarized, and the electrode/reactor/process design strategies based on strengthening direct and indirect oxidation, enhancing mass transfer efficiency and electron transfer efficiency, and improving the effective dose of electrogenerated oxidants are discussed. Furthermore, the factors affecting the inactivation of PMs and the issues regarding to stability and lifetime of the electrode are discussed respectively. Finally, the important research priorities and possible research challenges of P/ECO processes are put forward to make significant progress of this technology.

Always-on photocatalytic antibacterial facemask with mini UV-LED array

The facemask is a device to protect yourself and others against pandemics, such as coronavirus disease 2019 (COVID-19), and adding a functional filter to the facemask could offer extra protection against infectious microbes (such as bacteria and viruses) to the wearer. Here, we designed and fabricated an always-on photocatalytic antibacterial facemask, which comprised a reusable polypropylene filter layer coated with the photocatalytic laminated ZnO/TiO₂ bilayer and a separate UV-LEDs layer to supply UV whenever necessary. The fabricated photocatalytic filter was able to be directly inserted into the reusable facemask together with the UV-LEDs layer. This facemask could be used repeatedly and sustainably anytime and anywhere regardless of solar illumination. The photocatalytic filter exhibited an excellent photocatalytic antibacterial effect likely due to recombination suppression of electrons and holes of ZnO/TiO₂ bilayer and wetting transition from hydrophilic to superhydrophilic state on the surface of the filter. Thanks to the kirigami pattern in both photocatalytic filter and UV-LEDs layer, full-face covering, breathability, flexibility, and the snug fit are believed to be improved. Although further in-depth studies are still needed and there is a long way to go, we expect our design idea on the facemask to be considered in various fields.

Photocatalytic destruction of volatile aromatic compounds by platinized titanium dioxide in relation to the relative effect of the number of methyl groups on the benzene ring

The photocatalytic destruction (PCD) of volatile organic compounds (VOC) into environmentally benign compounds is one of the most ideal routes for the management of indoor air quality. It is nevertheless not easy to achieve the mineralization of aromatic VOC through PCD technology because of their recalcitrant structures (i.e., conjugated π benzene ring). In this research, the PCD potential against three model aromatic hydrocarbons (i.e., benzene (B), toluene (T), and m-xylene (X): namely, BTX) has been explored using a titanium dioxide (TiO₂) supported platinum (Pt) catalyst after the high-temperature hydrogen (H₂)-based reduction (R) pre-treatment (i.e., Pt/TiO₂-R). The effects of the key process variables (e.g., relative humidity (RH), oxygen (O₂) content, flow rate, VOC concentration, and the co-presence of VOC) on the PCD efficiency and related mechanisms were also assessed in detail. The PCD efficiency is seen to increase with the rise in the increasing number of methyl groups on the benzene ring (in the order of benzene (46.5%), toluene (68.2%), and m-xylene (95.9%)), as the adsorption and activation of the VOC molecule on the photocatalyst surface are promoted by the increased distribution of electrons on the benzene ring. The BTX were oxidated subsequently by the photogenerated reactive oxygen species (ROS), i.e., the hydroxyl radicals (•OH) and superoxide anion radicals (•O₂^-). The overall results of this study are expected to help expand the applicability of photocatalysis towards air quality management by offering detailed insights into the factors and processes governing the photocatalytic decomposition of aromatic VOCs.

Defect engineering of oxide surfaces: dream or reality?

In this brief perspective we analyze the present status of the field of defect engineering of oxide surfaces. In particular we discuss the tools and techniques available to generate, identify, quantify, and characterize point defects at oxide surfaces and the main areas where these centers play a role in practical applications.

Facile fabrication of surface vulcanized Co-Fe spinel oxide nanoparticles toward efficient 4-nitrophenol destruction

Developing efficient modulation strategies to boost the degradation efficiencies of non-noble metal catalysts for toxic phenolic compounds involving peroxymonosulfate (PMS)-based oxidation processes is essential but remains an arduous challenge. This study reports the one-pot construction of in-situ surface vulcanized CoFe₂O₄ @carbon (S_x-CF@C) to boost the PMS activation for 4-nitrophenol (4-NP) destruction. The direct pyrolysis of an aerogel precursor consisted of cobalt nitrate, ferric nitrate, melamine, and thiourea enables the as-formed S_x-CF@C with hierarchical structure, rich oxygen vacancies, and electron/mass transfer, thereby considerably promoting PMS activation performance of S_x-CF@C toward 4-NP degradation. Specifically, the optimal S_0.2-CF@C can achieve a removal efficiency of 99% for 4-NP destruction (20 mg/L) through PMS activation. Meanwhile, the catalyst also has generality to degrade a variety of antibiotic and dye organic pollutants. The radical quenching and electron paramagnetic resonance tests reveal the radical and non-radical activation mechanism in the S_0.2-CF@C/PMS system. The degradation pathway for 4-NP destruction over the S_0.2-CF@C/PMS system is proposed. This study provides an efficient approach to modulate the PMS activation performance of ferrite spinel materials toward the degradation of acute phenolic compounds.

Synthesis, Characterization, and Studies on Photophysical Properties of Rhodamine Derivatives and Metal Complexes in Dye-Sensitized Solar Cells

Rhodamine 6G dyes are low-cost, highly soluble fluorescent dyes frequently utilized as laser dyes, chemical sensors, and as tracer dyes in the determination of the direction and rate of flow of water. In this study, the photophysical properties of three rhodamine 6G dyes, bearing phenyl (P15), furan (P41), and 5-hydroxymethyl furan (P45), and their metal complexes were investigated using ultraviolet-visible (UV-vis) spectroscopy, fluorescence spectroscopy, fluorescence lifetime, and Fourier transform infrared (FTIR) measurements. Rhodamine 6G dyes and their complexes were subsequently applied as sensitizing dyes in the fabrication of dye-sensitized solar cells, and the solar to electric power efficiency and electrochemical impedance spectroscopy measurements were performed. The solar to electric power efficiency values of the metal complexes of the rhodamine 6G dyes were higher than those of the devices fabricated with only rhodamine dyes without copper (II). The most significant change was observed in rhodamine P41 with a 30% increase in solar to electric power efficiency when the dye was conjugated to the copper ion.

Synergy of cobalt vacancies and iron doping in cobalt selenide to promote oxygen electrode reactions in lithium-oxygen batteries

Electronic structural engineering plays a key role in the design of high-efficiency catalysts. Here, to achieve optimal electronic states, introduction of exotic Fe dopant and Co vacancy into CoSe₂ nanosheet (denoted as Fe-CoSe₂-V_Co) is presented. The obtained Fe-CoSe₂-V_Co demonstrates excellent catalytic activity as compared to CoSe₂. Experimental results and density functional theory (DFT) calculations confirm that Fe dopant and Co defects cause significant electron delocalization, which reduces the adsorption energy of LiO₂ intermediate on the catalyst surface, thereby obviously improving the electrocatalytic activity of Fe-CoSe₂-V_Co towards oxygen redox reactions. Moreover, the synergistic effect between Co vacancy and Fe dopant is able to optimize the microscopic electronic structure of Co ion, further reducing the energy barrier of oxygen electrode reactions on Fe-CoSe₂-V_Co. And the lithium-oxygen batteries (LOBs) based on Fe-CoSe₂-V_Co electrodes demonstrate a high Coulombic efficiency (CE) of about 72.66%, a large discharge capacity of about 13723 mA h g^-1, and an excellent cycling life of about 1338 h. In general, the electronic structure modulation strategy with the reasonable introduction of vacancy and dopant is expected to inspire the design of highly efficient catalysts for various electrochemical systems.

Influence of oxygen vacancy defects on Aurivillius phase layered perovskite oxides of bismuth towards photocatalytic environmental remediation

The low light absorption and rapid recombination of photogenerated charge carriers are primary contributors to the low activity of various photocatalysts. Fabrication of oxygen vacancy defect-rich materials for improved photocatalytic activities has been attracting tremendous attention from researchers all over the world. In this work, we have compared the photocatalytic activities of oxygen vacancy-rich Bi₂MoO₆(BMO-O_V) and Bi₂WO₆(BWO-O_V) for the degradation of a model pharmaceutical pollutant, ciprofloxacin under visible light irradiation. The photocatalytic activity was increased from 47% to 77% and 40% to-67% for BMO-O_Vand BWO-O_V, respectively in comparison to pristine oxides. This enhancement can be ascribed to suppressed charge carrier recombination and increased surface active sites. In addition, scavenger studies have been done to explain the role of photoinduced charge carriers in the degradation mechanism. Moreover, oxygen vacancy-rich photocatalysts have remained stable even after three consecutive cycles, making them promising materials for practical applications. Overall, this work provides deeper insight into the design and development of oxygen vacancy-rich materials.

One-pot synthesis of oxygen-vacancy-rich Cu-doped UiO-66 for collaborative adsorption and photocatalytic degradation of ciprofloxacin

UiO-66, as one of the most stable metal-organic frameworks (MOFs), has attracted a lot of attention in the field of adsorption and photocatalysis. However, this application of UiO-66 is still limited due to either the low accessibility of micropores or the poor electron-hole charge separation capability. This study aims to promote UiO-66 accessibility of micropores and charge separation through the construction of oxygen vacancies (OVs) and mesopore defects as well as copper incorporation. Herein, mesopore Cu doped UiO-66 with rich OVs was synthesized by a one-pot method and demonstrated high efficiency for the removal of ciprofloxacin (CIP) from the aquatic system. First of all, denatured mesopore defects were produced in Cu doped UiO-66 which possessed a 58% increase in specific surface area compared to UiO-66, facilitating the adsorption of molecular oxygen. Secondly, e^- was preferentially trapped by OVs under light irradiation. Electron (e^-) reacted rapidly with the surface adsorbed oxygen to generate superoxide radical (O₂^-). Meanwhile, copper incorporation increased the photocurrent and reduced the interfacial charge transfer resistance, thereby improving the charge separation efficiency. As a result, the adsorption efficiency and photocatalytic performance of mesopore Cu doped UiO-66 with OVs were 8.1 and 3.7 times higher than those of UiO-66, respectively. This study paved a way for the one-step synthesis of MOFs containing OVs and broadened the possibilities of practical applications for photo-induced removal of antibiotics from effluent.

Photochromic TiO2/PEGDA organogels

Photochromic materials can be used for modulation of the visible and infrared light transmittance for providing privacy or energy saving by blocking the heat. Titanium dioxide (TiO₂) nanoparticles has been well reported as a promising photochromic material. However, a high photochromic response from TiO₂ can be observed only when the nanoparticles are dispersed in a strong photogenerated hole scavenger at a liquid state, but polymer composites are less responsive due to lack of hole scavenging capability. However, it is intricate to apply suspensions in real window devices because of possible leaking. Here, we describe the preparation of TiO₂ quantum dot (QD)-based gels from polyethylene glycol diacrylate (PEGDA), N,N-Dimethylformamide (DMF), and ethanol (EtOH). Photochromic gels with TiO₂ contents (1-5 volume%) show performance comparable to their colloidal counterparts with capable of photodarkening within 30 min with a transmittance change ranging from 35.8 to 84.5% at 550 nm. These gels were capable of fully recovering the initial transmittance when not exposed to ultraviolet (UV) light within 3-8 h. The photochromic gel systems with ethanol shows reasonable stability by decreasing in transmittance recovery only by less than 10% in 10 cycles. A potential application for the developed photochromic gels can be photochromic windows.

General embedded cluster protocol for accurate modeling of oxygen vacancies in metal-oxides

The O vacancy (Ov) formation energy, EOv, is an important property of a metal-oxide, governing its performance in applications such as fuel cells or heterogeneous catalysis. These defects are routinely studied with density functional theory (DFT). However, it is well-recognized that standard DFT formulations (e.g., the generalized gradient approximation) are insufficient for modeling the Ov, requiring higher levels of theory. The embedded cluster method offers a promising approach to compute EOv accurately, giving access to all electronic structure methods. Central to this approach is the construction of quantum(-mechanically treated) clusters placed within suitable embedding environments. Unfortunately, current approaches to constructing the quantum clusters either require large system sizes, preventing application of high-level methods, or require significant manual input, preventing investigations of multiple systems simultaneously. In this work, we present a systematic and general quantum cluster design protocol that can determine small converged quantum clusters for studying the Ov in metal-oxides with accurate methods, such as local coupled cluster with single, double, and perturbative triple excitations. We apply this protocol to study the Ov in the bulk and surface planes of rutile TiO2 and rock salt MgO, producing the first accurate and well-converged determinations of EOv with this method. These reference values are used to benchmark exchange–correlation functionals in DFT, and we find that all the studied functionals underestimate EOv, with the average error decreasing along the rungs of Jacob’s ladder. This protocol is automatable for high-throughput calculations and can be generalized to study other point defects or adsorbates.

Green novel multicomponent synthesis and biological evaluation of new oxazolopyrazoloazepines and reduction of nitrophenols in the presence of Ag/Fe3O4/ZnO@MWCNT MNCs

In this research, new derivatives of oxazolopyrazoloazepines were synthesized in high yields using multicomponent reaction of anilines, oxalylchloride, alkyl bromides, activated acetylenic compounds, hydrazine and ethyl bromopyruvate in the presence of Ag/Fe₃O₄/ZnO@MWCNT magnetic nanocomposite (MNCs) as a high-performance magnetic catalyst in ionic liquid at room temperature. The Ag/Fe₃O₄/ZnO@MWCNT magnetic nanocomposites (MNCs) were synthesized using 1-octhyl-3-methyl imidazolium bromide ([OMIM]Br) as a stabilizer and soft template. Also, the catalytic activity of the Ag/Fe₃O₄/ZnO@MWCNT MNCs was evaluated in reduction of organic pollutants such as 4-nitrophenol (4-NP) in water at mild conditions. The results indicated that the biosynthesized nanocomposites (NCs) have high catalytic activity for organic pollutants within few seconds. Because of having benzazepine nucleus in the synthesized compounds, we investigate antioxidant property of some synthesized oxazolopyrazoloazepines by diphenyl-picrylhydrazine radical trapping and power of ferric reduction experiment. Short time of reaction, high yields of product, easy separation of catalyst and products are some advantages of this procedure.

Three-Dimensional Pinecone-like Binder-Free Pt-TiO2 Nanorods on Ti Mesh Structures: Synthesis, Characterization and Electroactivity towards Ethanol Oxidation

We report here the synthesis of binderless and template-less three-dimensional (3D) pinecone-shaped Pt/TiO₂/Ti mesh structure. The TiO₂ hydrothermally synthesized onto Ti mesh is composed of a mixture of flower-like nanorods and vertically aligned bar-shaped structures, whereas Pt film grown by pulsed laser deposition displays a smooth surface. XRD analyses reveal an average crystallite size of 41.4 nm and 68.5 nm of the TiO₂ nanorods and Pt, respectively. In H₂SO₄ solution, the platinum oxide formation at the Pt/TiO₂/Ti mesh electrode is 180 mV more negative than that at the Pt/Ti mesh electrode, indicating that TiO₂ provides oxygeneous species at lower potentials, which will facilitate the removal of CO-like intermediates and accelerate an ethanol oxidation reaction (EOR). Indeed, the Pt/TiO₂/Ti mesh catalyst exhibits current activity of 1.19 mA towards an EOR at a remarkably superior rate of 4.4 times that of the Pt/Ti mesh electrode (0.27 mA). Moreover, the presence of TiO₂ as a support to Pt delivers a steady-state current of 2.1 mA, with an increment in durability of 6.6 times compared to Pt/Ti mesh (0.32 mA). Pt is chosen here as a benchmark catalyst and we believe that with catalysts that perform better than Pt, such 3D pinecone structures can be useful for a variety of catalytic or photoelectrochemical reactions.

Enhanced photocatalytic performance of visible-light-driven CuOx/TiO2-x for degradation of gaseous formaldehyde: Roles of oxygen vacancies and nano copper oxides

Photocatalysis is an effective method for the removal of formaldehyde (HCHO), and high-efficiency visible-light-driven photocatalysts were urgently required. Herein, oxygen vacancies (OVs) and nano copper oxides (CuO_x) synergistically modified TiO₂ (CuO_x/TiO_2-x) photocatalysts were synthesized by one-step hydrothermal followed by impregnation method. The photocatalytic decomposition of HCHO reached 100% at initial concentration of 180 ppm under relative humidity (RH) = 60% by 0.1g CuO_x/TiO_2-x in 150 min visible light irradiation. Characterization results explored the complementary effect of OVs and CuO_x systematically. The OVs increased the separation efficiency of photogenerated charge carriers and act as adsorption/active sites in HCHO photocatalytic oxidation. The moisture and O₂ were adsorbed and actived by OVs to generate reactive oxygen species (ROS). After doped CuO_x on the surface of TiO_2-x, the photoexcited electrons in Cu₂O could transfer to the conduction band (CB) of TiO_2-x and the photoexcited electrons of TiO_2-x could be captured by Cu nanoparticles. Therefore, more ROS were generated due to the synergistic effect of OVs and CuO_x. The In-situ Fourier transform infrared (in-situ FTIR) measurements show the hydroxyl radical (•OH) was the dominant radical in HCHO photocatalytic oxidation, while •O₂^- could also upgrade the photodegradation efficiency of HCHO. Furthermore, the stability tests showed the degradation efficiency of HCHO still reached 90% after five recycles, indicating that CuO_x/TiO_2-x nanocomposites displayed a stable and high photoactivity in volatile organic compounds (VOCs) decomposition.

Titanium dioxide based nanocomposites - Current trends and emerging strategies for the photocatalytic degradation of ruinous environmental pollutants

Many ruinous pollutants are omnipresent in the environment and among them; pesticides are xenobiotic and pose to be a bio-recalcitrance. Their detrimental ecological and environmental impacts attract attention of environmental excerpts and the surge of stringent regulations have endows the need of a technically feasible treatment. This critical review emphasizes about the occurrence, abundance and fate of structurally distinct pesticides in different environment. The practiced remedial strategies and in particular, the advanced oxidation processes (AOPs) those utilize the photo-catalytic properties of nano-composites for the degradation of pollutants are critically discussed. Photo-catalytic degradation utilizes many composite materials at nano-scale level, wherein synthesis of nano-composites with appropriate precursors and other adjoining functional moieties are of prime importance. Therefore, suitable starter materials along with the reaction conditions are prerequisite for effectively tailoring the nano-composites. The aforementioned aspects and their customized applications are critically discussed. The associated challenges, opportunities and process economics of degradation using photo-catalytic AOP techniques are highlighted and in addition, the review tries to explain how best the photo-degradation can be a stand-alone tool with a societal importance. Conclusively, the future prospects for undertaking new researches in photo-catalytic breakdown of pollutants that can be judiciously sustainable.

Strategies based review on near-infrared light-driven bismuth nanocomposites for environmental pollutants degradation

Recently, solar energy has been considered the most vulnerable source to resolve environmental pollution and energy scarcity problems. Researchers have made intense research efforts to convert solar energy into chemical energy through photocatalysis processes as it is a green, clean and renewable energy source. Numerous discovered photocatalysts show absorption in the ultraviolet-visible (UV∼5% and visible ∼43%) region and are devoid of near-infrared (NIR ∼52%) light utilization. As infrared (IR) light contains a top portion of the solar spectrum; therefore, many alluring and attractive practical strategies have been explored to improve photocatalytic reactions and to harness full solar spectrum (including NIR light). Among those strategies, bandgap engineering, coupling with carbon quantum dots, heterostructure formation, mingling with plasmonic and upconversion (UC) NPs are more worthwhile. In different visible light-assisted photocatalysts, bismuth typically covers a distinctive, favorable, and earth-abundant group of freshly discovered innovative photocatalytic nanomaterials. Bi-based photocatalysts have suitable/good optoelectronic properties, crystalline geometric conformations, amendable electronic structure, and outstanding visible-light responsive range, helpful in environmental remediation and energy transformation. Due to the outstanding photo-oxidization/photodegradation capability of NIR-driven photocatalysts, bismuth-based nanomaterials have been considered suitable photocatalysts for inclusive solar energy utilization. Henceforth, keeping in mind the benefits of bismuth nanomaterials, the present review is focused on NIR-based modification strategies to upgrade solar light absorption of bismuth-based photocatalysts in the NIR region by making it NIR responsive photocatalyst. We have also discussed the photocatalytic applications of bismuth-based NIR responsive photocatalysts in pollutant degradation.

Design of a Metal-Oxide Solid Solution for Sub-ppm H2 Detection

Hydrogen is largely adopted in industrial processes and is one of the leading options for storing renewable energy. Due to its high explosivity, detection of H₂ has become essential for safety in industries, storage, and transportation. This work aims to design a sensing film for high-sensitivity H₂ detection. Chemoresistive gas sensors have extensively been studied for H₂ monitoring due to their good sensitivity and low cost. However, further research and development are still needed for a reliable H₂ detection at sub-ppm concentrations. Metal-oxide solid solutions represent a valuable approach for tuning the sensing properties by modifying their composition, morphology, and structure. The work started from a solid solution of Sn and Ti oxides, which is known to exhibit high sensitivity toward H₂. Such a solid solution was empowered by the addition of Nb, which─according to earlier studies on titania films─was expected to inhibit grain growth at high temperatures, to reduce the film resistance and to impact the sensor selectivity and sensitivity. Powders were synthesized through the sol-gel technique by keeping the Sn-Ti ratio constant at the optimal value for H₂ detection with different Nb concentrations (1.5-5 atom %). Such solid solutions were thermally treated at 650 and 850 °C. The sensor based on the solid solution calcined at 650 °C and with the lowest content of Nb exhibited an extremely high sensitivity toward H₂, paving the way for H₂ ppb detection. For comparison, the response to 50 ppm of H₂ was increased 6 times vs SnO₂ and twice that of (Sn,Ti)_xO₂.

TiO2-Based Nanostructures, Composites and Hybrid Photocatalysts

The field of materials sciences has always been strongly interconnected with the most significant technological developments in the modern era, and such an interconnection is absolutely evident at least since the 1950s revolution of electronics and microelectronics, driven by advances in the science of semiconductors [...].

TiO2 treatment using ultrasonication for bubble cavitation generation and efficiency assessment of a dye-sensitized solar cell

In this study, the impacts of different ultrasonic treatments on TiO₂ particles were determined and they were used to manufacture the photoelectrodes of a dye-sensitized solar cell (DSSC). Two methods were used to prepare TiO₂ particles directly sonicated by an ultrasonic horn, and TiO₂ treated indirectly by an ultrasonic cleaner. TEM, XPS analysis was confirmed that cavitation bubbles generated during ultrasonication resulted in defects on the surface of TiO₂ particles, and the defect induced surface activation. To understand the effect of TiO₂ surface activation on energy conversion efficiency of DSSC, ultrasonic horn DSSC and ultrasonic cleaner DSSC were prepared. The UV-vis analysis exhibited that the ultrasonic horn DSSC possessed higher dye adsorption when compared to the ultrasonic cleaner DSSC, and the EIS analysis confirmed that the electron mobility was greatly increased in the ultrasonic horn DSSC. The energy conversion efficiency of the ultrasonic horn DSSC was measured to be 3.35%, which is about 45% increase in comparison to that of the non-ultrasonic treated DSSC (2.35%). In addition to this regard, recombination resistance of ultrasonic horn DSSC was calculated to be 450 Ω·cm², increasing more than two times compared to the non-ultrasonic treated DSSC (200 Ω·cm²). Taken together, these ultrasonic treatments significantly improved the energy conversion efficiency of DSSC, which was not tried in DSSC-related research, and might lead us to develop more efficient practical route in the manufacturing of DSSC.

Efficient Role of Nanosheet-Like Pr2O3 Induced Surface-Interface Synergistic Structures over Cu-Based Catalysts for Enhanced Methanol Production from CO2 Hydrogenation

In a complex heterogeneous metal-catalyzed reaction process, unique cooperative effects between metal sites and surface-interface active sites, as well as favorable synergy between surface-interface active sites, can play crucial roles in improving their catalytic performances. In this work, a ZnO-modified Cu-based catalyst over defect-rich Pr₂O₃ nanosheets for high-efficiency CO₂ hydrogenation to produce methanol was successfully constructed. It was demonstrated that an as-fabricated nanosheet-like Cu-based catalyst presented several structural advantages including the formation of highly dispersive Cu⁰ sites and the coexistence of abundant defective Pr³⁺-V_o-Pr³⁺ structures (V_o: oxygen vacancy) and interfacial Cu-O-Pr sites. Combining structural characterization and catalytic reaction results with density functional theory calculations, it was clearly unveiled that the synergy between surface defective structures and Cu-Pr₂O₃ interfaces over the catalyst remarkably promoted the adsorption of CO₂ and CO intermediate, thus boosting the CO₂ hydrogenation simultaneously via both the formate intermediate pathway and the intense reverse water-gas shift reaction-derived CO hydrogenation pathway, along with a high space-time yield of methanol of 0.395 g_MeOH·g_cat^-1·h^-1 under mild reaction conditions (260 °C and 3.0 MPa). The study provides a new strategy to construct high-performance Cu-based catalysts for high-efficiency CO₂ hydrogenation to produce methanol and a deep understanding of the promotional roles of synergy between surface-interface active sites in the CO₂ hydrogenation.

Non-Stacked γ-Fe2O3/C@TiO2 Double-Layer Hollow Nanoparticles for Enhanced Photocatalytic Applications under Visible Light

Herein, a non-stacked γ-Fe₂O₃/C@TiO₂ double-layer hollow nano photocatalyst has been developed with ultrathin nanosheets-assembled double shells for photodegradation phenol. High catalytic performance was found that the phenol could be completely degraded in 135 min under visible light, due to the moderate band edge position (VB at 0.59 eV and CB at −0.66 eV) of the non-stacked γ-Fe₂O₃/C@TiO₂, which can expand the excitation wavelength range into the visible light region and produce a high concentration of free radicals (such as ·OH, ·O²⁻, holes). Furthermore, the interior of the hollow composite γ-Fe₂O₃ is responsible for charge generation, and the carbon matrix facilitates charge transfer to the external TiO₂ shell. This overlap improved the selection/utilization efficiency, while the unique non-stacked double-layered structure inhibited initial charge recombination over the photocatalysts. This work provides new approaches for photocatalytic applications with γ-Fe₂O₃/C-based materials.

A critical review on relationship of CeO2-based photocatalyst towards mechanistic degradation of organic pollutant

Nanostructured photocatalysts commonly offered opportunities to solve issues scrutinized with the environmental challenges caused by steep population growth and rapid urbanization. This photocatalyst is a controllable characteristic, which can provide humans with a clean and sustainable ecosystem. Over the last decades, one of the current thriving research focuses on visible-light-driven CeO₂-based photocatalysts due to their superior characteristics, including unique fluorite-type structure, rigid framework, and facile reducing oxidizing properties of cerium's tetravalent (Ce⁴⁺) and trivalent (Ce³⁺) valence states. Notwithstanding, owing to its inherent wide energy gap, the solar energy utilization efficiency is low, which limits its application in wastewater treatment. Numerous modifications of CeO₂ have been employed to enhance photodegradation performances, such as metals and non-metals doping, adding support materials, and coupling with another semiconductor. Besides, all these doping will form a different heterojunction and show a different way of electron-hole migration. Compared to conventional heterojunction, advanced heterojunction types such as p-n heterojunction, Z-scheme, Schottky junction, and surface plasmon resonance effect exhibit superior performance for degradation owing to their excellent charge carrier separation, and the reaction occurs at a relatively higher redox potential. This review attends to providing deep insights on heterojunction mechanisms and the latest progress on photodegradation of various contaminants in wastewater using CeO₂-based photocatalysts. Hence, making the CeO₂ photocatalyst more foresee and promising to further development and research.

Efficient photoreduction of hexavalent uranium over defective ZnO nanoparticles by oxygen defect engineering

The oxygen-defect engineering of ZnO-400 nanosheets to enhance their photocatalytic performance for U(vi) reduction.

Mechanochemical synthesis of ternary heterojunctions TiO2(A)/TiO2(R)/ZnO and TiO2(A)/TiO2(R)/SnO2 for effective charge separation in semiconductor photocatalysis: A comparative study

TiO₂, ZnO, and SnO₂ metal oxides were synthesized by the sol-gel method and heterojunctions were fabricated by combining TiO₂ with either ZnO or SnO₂ in a 1:1 ratio using mechanochemical ball milling process. The ball milling process promotes phase transition of TiO₂ from anatase to rutile and yields ternary heterojunction of the type TiO₂(A)/TiO₂(R)/ZnO and TiO₂(A)/TiO₂(R)/SnO₂ (A-anatase and R-rutile). These ternary heterojunctions were characterized by various analytical techniques and its photocatalytic efficiency is evaluated using 4-Chloro Phenol as a model compound under UV and solar light. The enhanced catalytic activity of TiO₂(A)/TiO₂(R)/ZnO heterojunction is attributed to the formation of Ti³⁺-V_o defect states which leads to the efficient charge carrier separation. During the ball milling process severe crystal deformation takes place in TiO₂ and ZnO lattices by creating crystal lattice distortion which leads to the formation of defects due to valency mismatch between Ti⁴⁺ and Zn²⁺. A mechanistic pathway is proposed for the enhanced photocatalytic activity of the ternary heterojunctions.

TiO2 nanocrystal rods on titanium microwires: growth, vacuum annealing, and photoelectrochemical oxygen evolution

Titania nanocrystal rods grown hydrothermally onto titanium microwire are mechanically robust and photoelectrochemically active.

Preparation of Ni-loaded oxygen-enriched vacancy TiO2−x hierarchical micro-nanospheres and the study of their photocatalytic hydrogen evolution performance

Ni-loaded oxygen-enriched vacancy TiO2−x hierarchical micro-nanospheres were prepared, and the photocatalytic hydrogen production properties were greatly improved due to the synergetic effect between THS, oxygen vacancies and Ni-based promoters.