Complex Salt Dependence of Polymer Diffusion in Polyelectrolyte Multilayers

Polyelectrolyte multilayers (PEMs) have significant potential in many technologies, yet the dynamics of the constituent polymer chains remains poorly understood. We used total internal reflection fluorescence microscopy to observe microscopic single-molecule transport of fluorescently labeled poly-l-lysine (PLL) diffusing within the bulk of a PEM composed of PLL and poly(2-acrylamido-2-methyl-1-propanesulfonic acid) (PAMPS) when exposed to NaCl solutions ranging in concentration from 0 to 2 M. Statistical analysis of PLL trajectories revealed motion that was nonergodic, subdiffusive, and temporally anticorrelated under all conditions. In contrast with previous macroscopic measurements of polymer diffusion within PEMs, the microscopic diffusion was 2-3 orders of magnitude faster and varied nonmonotonically with salt concentration in a way that was similar to trends previously associated with PEM swelling and viscoelastic properties. This trend in the anomalous diffusion was attributed to complex salt-dependent changes in the viscoelastic properties of the film that balanced intermolecular binding and molecular conformation.

G, Thomas JP. Boron selective thin film composite nanofiltration membrane fabricated via a self-assembled trimesic acid layer at a liquid–liquid interface on an ultrafiltration support

A negatively charged nanofiltration membrane was prepared with a high selectivity for the rejection of both multivalent and monovalent ions during seawater pre-treatment.

Layer-by-layer biofunctionalization of nanostructured porous silicon for high-sensitivity and high-selectivity label-free affinity biosensing

Nanostructured materials premise to revolutionize the label-free biosensing of analytes for clinical applications, leveraging the deeper interaction between materials and analytes with comparable size. However, when the characteristic dimension of the materials reduces to the nanoscale, the surface functionalization for the binding of bioreceptors becomes a complex issue that can affect the performance of label-free biosensors. Here we report on an effective and robust route for surface biofunctionalization of nanostructured materials based on the layer-by-layer (LbL) electrostatic nano-assembly of oppositely-charged polyelectrolytes, which are engineered with bioreceptors to enable label-free detection of target analytes. LbL biofunctionalization is demonstrated using nanostructured porous silicon (PSi) interferometers for affinity detection of streptavidin in saliva, through LbL nano-assembly of a bi-layer of positively-charged poly(allylamine hydrochloride) (PAH) and negatively-charged biotinylated poly(methacrylic acid) (b-PMAA). High sensitivity in streptavidin detection is achieved, with high selectivity and stability, down to a detection limit of 600 fM.

Nanoporous Anodic Alumina Photonic Crystals for Optical Chemo- and Biosensing: Fundamentals, Advances, and Perspectives

Optical sensors are a class of devices that enable the identification and/or quantification of analyte molecules across multiple fields and disciplines such as environmental protection, medical diagnosis, security, food technology, biotechnology, and animal welfare. Nanoporous photonic crystal (PC) structures provide excellent platforms to develop such systems for a plethora of applications since these engineered materials enable precise and versatile control of light⁻matter interactions at the nanoscale. Nanoporous PCs provide both high sensitivity to monitor in real-time molecular binding events and a nanoporous matrix for selective immobilization of molecules of interest over increased surface areas. Nanoporous anodic alumina (NAA), a nanomaterial long envisaged as a PC, is an outstanding platform material to develop optical sensing systems in combination with multiple photonic technologies. Nanoporous anodic alumina photonic crystals (NAA-PCs) provide a versatile nanoporous structure that can be engineered in a multidimensional fashion to create unique PC sensing platforms such as Fabry⁻Pérot interferometers, distributed Bragg reflectors, gradient-index filters, optical microcavities, and others. The effective medium of NAA-PCs undergoes changes upon interactions with analyte molecules. These changes modify the NAA-PCs' spectral fingerprints, which can be readily quantified to develop different sensing systems. This review introduces the fundamental development of NAA-PCs, compiling the most significant advances in the use of these optical materials for chemo- and biosensing applications, with a final prospective outlook about this exciting and dynamic field.

Development and Characterization of New Pervaporation PVA Membranes for the Dehydration Using Bulk and Surface Modifications

In the present work, the novel dense and supported membranes based on polyvinyl alcohol (PVA) with improved transport properties were developed by bulk and surface modifications. Bulk modification included the blending of PVA with chitosan (CS) and the creation of a mixed-matrix membrane by introduction of fullerenol. This significantly altered the internal structure of PVA membrane, which led to an increase in permeability with high selectivity to water. Surface modification of the developed modified dense membranes, based on composites PVA-CS and PVA-fullerenol-CS, was performed through (i) making of a supported membrane with a thin selective composite layer and (ii) applying of the layer-by-layer assembly (LbL) method for coating of nano-sized polyelectrolyte (PEL) layers to increase the membrane productivity. The nature of polyelectrolyte type-(poly(allylamine hydrochloride) (PAH), poly(sodium 4-styrenesulfonate) (PSS), poly(acrylic acid) (PAA), CS), and number of PEL bilayers (2⁻10)-were studied. The structure of the composite membranes was investigated by FTIR, X-ray diffraction, and SEM. Transport properties were studied during the pervaporation separation of 80% isopropanol⁻20% water mixture. It was shown that supported membrane consisting of hybrid layer of PVA-fullerenol (5%)⁻chitosan (20%) with five polyelectrolyte bilayers (PSS, CS) deposited on it had the best transport properties.

Intrinsic Properties of Polyelectrolyte Multilayer Membranes: Erasing the Memory of the Interface

Polyelectrolyte multilayers (PEMUs) are ultrathin membranes made by alternating adsorption of oppositely charged polyelectrolytes on substrates. Although PEMUs have shown exceptional selectivity for certain ion-filtering applications, they usually contain an excess of one of the polyelectrolytes due to the history- and condition-dependent mode of PEMU assembly. This excess charge provides fixed sites for ion exchange, enhancing the concentration of oppositely charged ions. Thus, the ion-permselective properties of PEMUs cannot be compared unless they are assembled under identical conditions. This work demonstrates the enhanced permeability of PEMUs as-made from poly(diallyldimethylammonium) (PDADMA), and poly(styrene sulfonate) (PSS) to ferricyanide as an example of an anion. Annealing by NaCl followed by pairing of excess PDADMA with additional PSS produces an almost stoichiometric film that better reflects the intrinsic transport properties of PEMUs. This pairing, observed in real time using electrochemical methods, occurs at the PEMU/solution interface under countercurrent transport of PSS from solution and excess PDADMA paired with a counterion, termed PDADMA*, from the PEMU bulk. A quantitative comparison of PSS and PDADMA* diffusion reveals the conditions under which PEMU assembly depends on PSS molecular weight and concentration.

Ability of the Poisson-Boltzmann equation to capture molecular dynamics predicted ion distribution around polyelectrolytes

Here, we examine polyelectrolyte (PE) and ion chemistry specificity in ion condensation via all-atom molecular dynamics (MD) simulations and assess the ability of the Poisson-Boltzmann (PB) equation to describe the ion distribution predicted by the MD simulations. The PB model enables the extraction of parameters characterizing ion condensation. We find that the modified PB equation which contains the effective PE radius and the energy of the ion-specific interaction as empirical fitting parameters describes ion distribution accurately at large distances but close to the PE, especially when strongly localized charge or specific ion binding sites are present, the mean field description of PB fails. However, the PB model captures the MD predicted ion condensation in terms of the Manning radius and fraction of condensed counterions for all the examined PEs and ion species. We show that the condensed ion layer thickness in our MD simulations collapses on a single master curve for all the examined simple, monovalent ions (Na⁺, Br⁺, Cs⁺, Cl^-, and Br^-) and PEs when plotted against the Manning parameter (and consequently the PE line charge density). The significance of this finding is that, contrary to the Manning radius extracted from the mean field PB model, the condensed layer thickness in the all atom detail MD modelling does not depend on the PE chemistry or counterion type. Furthermore, the fraction of condensed counterions in the MD simulations exceeds the PB theory prediction. The findings contribute toward understanding and modelling ion distribution around PEs and other charged macromolecules in aqueous solutions, such as DNA, functionalized nanotubes, and viruses.

A plug and socket approach for tightening polyelectrolyte multilayers

A plug and socket approach for tightening polyelectrolyte multilayers is introduced based on the use pendant β-cyclodextrin groups.

Recent Advances in the Fabrication of Membranes Containing "Ion Pairs" for Nanofiltration Processes

In the face of serious environmental pollution and water scarcity problems, the membrane separation technique, especially high efficiency, low energy consumption, and environmental friendly nanofiltration, has been quickly developed. Separation membranes with high permeability, good selectivity, and strong antifouling properties are critical for water treatment and green chemical processing. In recent years, researchers have paid more and more attention to the development of high performance nanofiltration membranes containing “ion pairs”. In this review, the effects of “ion pairs” characteristics, such as the super-hydrophilicity, controllable charge character, and antifouling property, on nanofiltration performances are discussed. A systematic survey was carried out on the various approaches and multiple regulation factors in the fabrication of polyelectrolyte complex membranes, zwitterionic membranes, and charged mosaic membranes, respectively. The mass transport behavior and antifouling mechanism of the membranes with “ion pairs” are also discussed. Finally, we present a brief perspective on the future development of advanced nanofiltration membranes with “ion pairs”.

Multilayered Films Produced by Layer-by-Layer Assembly of Chitosan and Alginate as a Potential Platform for the Formation of Human Adipose-Derived Stem Cell aggregates

The construction of multilayered films with tunable properties could offer new routes to produce biomaterials as a platform for 3D cell cultivation. In this study, multilayered films produced with five bilayers of chitosan and alginate (CHT/ALG) were built using water-soluble modified mesyl and tosyl–CHT via layer-by-layer (LbL) self-assembly. NMR results demonstrated the presences of mesyl (2.83 ppm) and tosyl groups (2.39, 7.37 and 7.70 ppm) in the chemical structure of modified chitosans. The buildup of multilayered films was monitored by quartz-crystal-microbalance (QCM-D) and film thickness was estimated using the Voigt-based viscoelastic model. QCM-D results demonstrated that CHT/ALG films constructed using mesyl or tosyl modifications (mCHT/ALG) were significantly thinner in comparison to the CHT/ALG films constructed with unmodified chitosan (p < 0.05). Adhesion analysis demonstrated that human adipose stem cells (hASCs) did not adhere to the mCHT/ALG multilayered films and formed aggregates with sizes between ca. 100–200 µm. In vitro studies on cell metabolic activity and live/dead staining suggested that mCHT/ALG multilayered films are nontoxic toward hACSs. Multilayered films produced via LbL assembly of ALG and off-the-shelf, water-soluble modified chitosans could be used as a scaffold for the 3D aggregates formation of hASCs in vitro.

Polymeric and Lipid Membranes-From Spheres to Flat Membranes and vice versa

Membranes are important components in a number of systems, where separation and control of the flow of molecules is desirable. Controllable membranes represent an even more coveted and desirable entity and their development is considered to be the next step of development. Typically, membranes are considered on flat surfaces, but spherical capsules possess a perfect "infinite" or fully suspended membranes. Similarities and transitions between spherical and flat membranes are discussed, while applications of membranes are also emphasized.

From polyelectrolyte complexes to polyelectrolyte multilayers: Electrostatic assembly, nanostructure, dynamics, and functional properties

Polyelectrolyte complexes (PECs) are three-dimensional macromolecular structures formed by association of oppositely charged polyelectrolytes in solution. Polyelectrolyte multilayers (PEMs) can be considered a special case of PECs prepared by layer-by-layer (LbL) assembly that involves sequential deposition of molecular-thick polyelectrolyte layers with nanoscale control over the size, shape, composition and internal organization. Although many functional PEMs with novel physical and chemical characteristics have been developed, the current practical applications of PEMs are limited to those that require only a few bilayers and are relatively easy to prepare. The viability of such engineered materials can be realized only after overcoming the scientific and engineering challenges of understanding the kinetics and transport phenomena involved in the multilayer growth and the factors governing their final structure, composition, and response to external stimuli. There is a great need to model PEMs and to connect PEM behavior with the characteristics of the PEC counterparts to allow for prediction of performance and better design of multilayered materials. This review focuses on the relationship between PEMs and PECs. The constitutive interactions, the thermodynamics and kinetics of polyelectrolyte complexation and PEM formation, PEC phase behavior, PEM growth, the internal structure and stability in PEMs and PECs, and their response to external stimuli are presented. Knowledge of such interactions and behavior can guide rapid fabrication of PEMs and can aid their applications as nanocomposites, coatings, nano-sized reactors, capsules, drug delivery systems, and in electrochemical and sensing devices. The challenges and opportunities in future research directions are also discussed.

Design and function of biomimetic multilayer water purification membranes

Multilayer architectures in water purification membranes enable increased water throughput, high filter efficiency, and high molecular loading capacity. However, the preparation of membranes with well-organized multilayer structures, starting from the nanoscale to maximize filtration efficiency, remains a challenge. We report a complete strategy to fully realize a novel biomaterial-based multilayer nanoporous membrane via the integration of computational simulation and experimental fabrication. Our comparative computational simulations, based on coarse-grained models of protein nanofibrils and mineral plates, reveal that the multilayer structure can only form with weak interactions between nanofibrils and mineral plates. We demonstrate experimentally that silk nanofibril (SNF) and hydroxyapatite (HAP) can be used to fabricate highly ordered multilayer membranes with nanoporous features by combining protein self-assembly and in situ biomineralization. The production is optimized to be a simple and highly repeatable process that does not require sophisticated equipment and is suitable for scaled production of low-cost water purification membranes. These membranes not only show ultrafast water penetration but also exhibit broad utility and high efficiency of removal and even reuse (in some cases) of contaminants, including heavy metal ions, dyes, proteins, and other nanoparticles in water. Our biomimetic design and synthesis of these functional SNF/HAP materials have established a paradigm that could lead to the large-scale, low-cost production of multilayer materials with broad spectrum and efficiency for water purification, with applications in wastewater treatment, biomedicine, food industry, and the life sciences.

Electrodeposition of PtNPs on the LBL assembled multilayer films of (PDDA-GS/PEDOT:PSS)n and their electrocatalytic activity toward methanol oxidation

In the present work, PDDA-functionalized graphene sheets (PDDA-GS) were prepared by reduction with hydrazine hydrate in situ in the presence of poly(diallyldimethylammonium chloride) (PDDA).

pH-Responsive nanofiltration membranes based on porphyrin supramolecular self-assembly by layer-by-layer technique

A novel pH-responsive nanofiltration membrane was fabricated by means of layer-by-layer technique based on porphyrin supramolecular self-assembly.

Gas Permeability of Hyperthin Polyelectrolyte Multilayers Having Matched and Mismatched Repeat Units

A series of polyelectrolyte multilayers (PEMs) has been fabricated using polyanions and polycations that have repeat units (i) similar in structure and composition (matched), (ii) partially similar in structure and composition (semimatched), and (iii) very different in structure and composition (mismatched). The primary aim of this investigation was to determine whether the matching of the polyelectrolytes can significantly influence the permeability properties of hyperthin PEMs. While matching, per se, was not found to be a key factor in defining membrane permeability, large differences in permeability were observed (the permeances of N₂ varied by a factor of 20), which were correlated with the concentration of pendant aryl groups present, i.e., the greater the concentration of these groups, the higher the permeability. Analysis by AFM indentation measurements further revealed that high-permeability PEMs tend to be more compliant than low-permeability PEMs. These findings underscore the need for considering a broad range of polyelectrolyte combinations when optimizing a particular functional property of PEMs.

Innovation in Layer-by-Layer Assembly

Methods for depositing thin films are important in generating functional materials for diverse applications in a wide variety of fields. Over the last half-century, the layer-by-layer assembly of nanoscale films has received intense and growing interest. This has been fueled by innovation in the available materials and assembly technologies, as well as the film-characterization techniques. In this Review, we explore, discuss, and detail innovation in layer-by-layer assembly in terms of past and present developments, and we highlight how these might guide future advances. A particular focus is on conventional and early developments that have only recently regained interest in the layer-by-layer assembly field. We then review unconventional assemblies and approaches that have been gaining popularity, which include inorganic/organic hybrid materials, cells and tissues, and the use of stereocomplexation, patterning, and dip-pen lithography, to name a few. A relatively recent development is the use of layer-by-layer assembly materials and techniques to assemble films in a single continuous step. We name this "quasi"-layer-by-layer assembly and discuss the impacts and innovations surrounding this approach. Finally, the application of characterization methods to monitor and evaluate layer-by-layer assembly is discussed, as innovation in this area is often overlooked but is essential for development of the field. While we intend for this Review to be easily accessible and act as a guide to researchers new to layer-by-layer assembly, we also believe it will provide insight to current researchers in the field and help guide future developments and innovation.