Latest advances in supercapacitors: from new electrode materials to novel device designs

In Situ Growth of Fe2O3 Nanorod Arrays on Carbon Cloth with Rapid Charge Transfer for Efficient Nitrate Electroreduction to Ammonia

Electrochemical reduction of nitrate to ammonia (NH3), a green NH3 production route upon combining with renewable energy sources, is an appealing and alternative method to the Haber-Bosch process. However, this process not only involves the complicated eight-electron reduction to transform nitrate into various nitrogen products but simultaneously suffers from the competitive hydrogen evolution reaction, challenged by a lack of efficient catalysts. Herein, the in situ growth of Fe2O3 nanorod arrays on carbon cloth (Fe2O3 NRs/CC) is reported to exhibit a high NH3 yield rate of 328.17 μmol h-1 cm-2 at -0.9 V versus RHE, outperforming most of the reported Fe catalysts. An in situ growth strategy provides massive exposed active sites and a fast electron-transport channel between the carbon cloth and Fe2O3, which accelerates the charge-transport rate and facilitates the conversion of nitrate to NH3. In situ Raman spectroscopy in conjunction with attenuated total reflection Fourier transform infrared spectroscopy reveals the catalytic mechanism of nitrate to NH3. Our study provides not only an efficient catalyst for NH3 production but also useful guidelines for the pathways and mechanism of nitrate electroreduction to NH3.

Mechanically Induced Nanoscale Architecture Endows a Titanium Carbide MXene Electrode with Integrated High Areal and Volumetric Capacitance

Complete utilization of electrochemically active materials while maintaining the high areal/volumetric packing density is a goal to be achieved in miniaturized supercapacitor devices, which therefore display both high volumetric and areal energy density. Although critical, it is usually challenging to achieve this goal by optimizing the electrode architecture. Dense packing of active materials maximizes the volumetric capacitance but also results in sluggish diffusion of the electrolyte. Structurization of the electrode by forming large pores creates a pathway for electrolyte penetration but reduces the volumetric energy density. Here, densified electrodes with hierarchical porous architecture at the nanoscale are reported, which provide an alternative solution. Worm-like expanded titanium carbide MXene powders are produced in highly viscous reaction media and assembled by mechanical compression. The expanded morphology of the MXene powders translates into a buckling microstructure in the electrodes, resulting in 28.2 ± 4.1% porosity mainly in the form of nanosized pores. At the sub-nanometer scale, the diffusion of electrolytes is enhanced in interlayer space of the bended lattice with pillared intercalants. These hierarchical structural features lead to both high areal and volumetric capacitance (11.4 F cm^-2 coupled with 770 F cm^-3 ) in hundred-micrometers-thick electrodes, which inspires the design of high-performance electrochemical energy storage devices.

Emerging Electrochromic Materials and Devices for Future Displays

With the rapid development of optoelectronic fields, electrochromic (EC) materials and devices have received remarkable attention and have shown attractive potential for use in emerging wearable and portable electronics, electronic papers/billboards, see-through displays, and other new-generation displays, due to the advantages of low power consumption, easy viewing, flexibility, stretchability, etc. Despite continuous progress in related fields, determining how to make electrochromics truly meet the requirements of mature displays (e.g., ideal overall performance) has been a long-term problem. Therefore, the commercialization of relevant high-quality products is still in its infancy. In this review, we will focus on the progress in emerging EC materials and devices for potential displays, including two mainstream EC display prototypes (segmented displays and pixel displays) and their commercial applications. Among these topics, the related materials/devices, EC performance, construction approaches, and processing techniques are comprehensively disscussed and reviewed. We also outline the current barriers with possible solutions and discuss the future of this field.

Lignin-Derived Quinone Redox Moieties for Bio-Based Supercapacitors

Because of their rapid charging and discharging, high power densities, and excellent cycling life stabilities, supercapacitors have great potential for use in electric vehicles, portable electronics, and for grid frequency modulation. The growing need for supercapacitors that are both efficient and ecologically friendly has generated curiosity in developing sustainable biomass-based electrode materials and electrolytes. Lignin, an aromatic polymer with remarkable electroactive redox characteristics and a large number of active functional groups, is one such candidate for use in renewable supercapacitors. Because its chemical structure features an abundance of quinone groups, lignin undergoes various surface redox processes, storing and releasing both electrons and protons. Accordingly, lignin and its derivatives have been tested as electroactive materials in supercapacitors. This review discusses recent examples of supercapacitors incorporating electrode materials and electrolytes derived from lignin, focusing on the pseudocapacitance provided by the quinone moieties, with the goal of encouraging the use of lignin as a raw material for high-value applications. Employing lignin and its derivatives as active materials in supercapacitor electrodes and as a redox additive in electrolytes has the potential to minimize environmental pollution and energy scarcity while also providing economic benefits.

Efficient Metal-Oriented Electrodeposition of a Co-Based Metal-Organic Framework with Superior Capacitive Performance

An efficient cathodic electrodeposition method is developed for coating Co-based metal-organic frameworks (Co-MOF) on carbon fiber cloth (CFC), a widely used substrate in energy fields. The use of a highly active Co metal surface enables nucleation and growth of Co-MOF in 3D rodlike crystal bundles. When used as a binder-free electrode (Co-MOF/CFC) for supercapacitors, it shows a high areal capacitance of 1784 mF cm^-2 at 1 mA cm^-2 , good cycling stability and excellent rate capability. The assembled asymmetric all-solid-state supercapacitor device (Co-MOF/CFC//AC) delivers a high energy density and power density. This work may open up an effective approach to realize the electrosynthesis of MOF films, promoting use in energy storage and conversion fields.

In situ fabrication of dry/gel bilayer Ti3C2Tx films for high-rate micro-supercapacitors

A H₂SO₄-Ti₃C₂T_x ion-gel is in situ fabricated to prevent the restacking of Ti₃C₂T_x for high-rate micro-supercapacitors. The ion-gel pillared by an electrolyte possesses an enlarged interlayer spacing facilitating ion transport. Furthermore, a bilayer structure is designed with dry Ti₃C₂T_x for fast electron conduction. The bilayer Ti₃C₂T_x film shows improved capacitance from 49% to 73% of the initial capacitance at a high scan rate of 200 mV s^-1, along with excellent cycle stability. This study opens up a concise and efficient way for high-performance micro-supercapacitors.

Role of Electrochemical Techniques for Photovoltaic and Supercapacitor Applications

Electrochemistry forms the base of large-scale production of various materials, encompassing numerous applications in metallurgical engineering, chemical engineering, electrical engineering, and material science. This field is important for energy harvesting applications, especially supercapacitors (SCs) and photovoltaic (PV) devices. This review examines various electrochemical techniques employed to fabricate and characterize PV devices and SCs. Fabricating these energy harvesting devices is carried out by electrochemical methods, including electroreduction, electrocoagulation, sol-gel process, hydrothermal growth, spray pyrolysis, template-assisted growth, and electrodeposition. The characterization techniques used are cyclic voltammetry, electrochemical impedance spectroscopy, photoelectrochemical characterization, galvanostatic charge-discharge, and I-V curve. A study on different recently reported materials is also presented to analyze their performance in various energy harvesting applications regarding their efficiency, fill factor, power density, and energy density. In addition, a comparative study of electrochemical fabrication techniques with others (including physical vapor deposition, mechanical milling, laser ablation, and centrifugal spinning) has been conducted. The various challenges of electrochemistry in PVs and SCs are also highlighted. This review also emphasizes the future perspectives of electrochemistry in energy harvesting applications.

Metal-organic framework (MOF) composites as promising materials for energy storage applications

Metal-organic framework (MOF) composites are considered to be one of the most vital energy storage materials due to their advantages of high porousness, multifunction, various structures and controllable chemical compositions, which provide a great possibility to find suitable electrode materials for batteries and supercapacitors. However, MOF composites are still in the face of various challenges and difficulties that hinder their practical application. In this review, we introduce and summarize the applications of MOF composites in batteries, covering metal-ion batteries, lithium-sulfur batteries, lithium-oxygen batteries and zinc-air batteries, as well as supercapacitors. In addition, the application challenges of MOF composites in batteries and supercapacitors are also summarized. Finally, the basic ideas and directions for further development of these two types of electrochemical energy storage devices are proposed.

Recycling and applications of ammonium polyphosphate/polycarbonate/acrylonitrile butadiene styrene by laser-scribing technologies for supercapacitor electrode materials

Fabricating a simple and valid high-property graphene-based supercapacitor employing engineered plastic waste as the original material has attracted tremendous interest. Herein we report an extendable method for producing nitrogen and phosphorus dual-doped porous three-dimensional (3D) graphene materials from the blends of ammonium polyphosphate (APP) and polycarbonate (PC)/acrylonitrile ((A), butadiene (B), and styrene (S)) (ABS) using a simple laser direct-writing technique. In APP/PC/ABS blends, APP/PC/ABS, a waste by-product generated in car interiors and exterior decoration and electronic device shells and other fields, served as a sufficient and economic carbon source, while APP was employed as a nitrogen and phosphorus source as well as flame retardant. APP/PC/ABS blends could be transformed into nitrogen and phosphorus dual-doped laser-induced graphene (NPLIG) via scribing under a CO₂ laser in air conditions. In addition, a supercapacitor was fabricated applying NPLIG as the electrode material, and KOH solution as the electrolyte. The as-fabricated NPLIG supercapacitor exhibited excellent electrochemical behaviours, namely, a high specific areal capacitance (239 F g⁻¹) at a current density of 0.05 A g⁻¹, which outperformed many LIG-based and GO-based supercapacitors. The concept of designing supercapacitors that can be obtained with a facile laser-scribing technology can stimulate both the building of supercapacitors and preparation of graphene, and the sustainable utilization of engineering plastics.

Fabricating a simple and valid high-property graphene-based supercapacitor employing engineered plastic waste as the original material has attracted tremendous interest.

Organoamine Templated Multifunctional Hybrid Metal Phosphonate Frameworks: Promising Candidates for Tailoring Electrochemical Behaviors and Size-Selective Efficient Heterogeneous Lewis Acid Catalysis

The successful discovery of novel multifunctional metal phosphonate framework materials that incorporate newer organoamines and their utilization as a potential electroactive material for energy storage applications (supercapacitors) and as efficient heterogeneous catalysts are the most enduring challenges at present. From this perspective, herein, four new inorganic-organic hybrid zinc organodiphosphonate materials, namely, [C₅H₁₄N₂]₂[Zn₆(hedp)₄] (I), [C₅H₁₄N₂]_0.5[Zn₃(Hhedp) (hedp)]·2H₂O (II), [C₆H₁₆N₂][Zn₃(hedp)₂] (III), and [C₁₀H₂₄N₄][Zn₆(Hhedp)₂(hedp)₂] (IV) (H₄hedp = 1-hydroxyethane 1,1-diphosphonic acid), have been synthesized through the introduction of different organoamines and then structurally analyzed using various techniques. The compounds (I-IV) possess a three-dimensional network through alternate connectivity of zinc ions and diphosphonate ligands, as confirmed using single-crystal X-ray diffraction. The investigations of electrochemical charge storage behaviors of the present compounds indicate that compound III exhibits a high specific capacitance of 190 F g^-1 (76 C g^-1) at 1 A g^-1, while compound II shows an excellent cycling stability of 90.11% even after 5000 cycles at 5 A g^-1 in the 6 M KOH solution. Further, the present materials have also been utilized as active heterogeneous Lewis acid catalysts in the ketalization reaction. The screening of various substrate scopes during the catalytic process confirms the size-selective heterogeneous catalytic nature of the framework compounds. To our utmost knowledge, such a size-selective heterogeneous Lewis acid catalytic behavior has been observed for the first time in the amine templated inorganic-organic hybrid framework family. Moreover, the excellent size-selective catalytic efficiencies with the d¹⁰ metal system and recyclability performances make the compounds (I-IV) more efficient and promising Lewis acid heterogeneous catalysts.

Iron phosphate hydroxide hydrate as a novel anode material for advanced aqueous full potassium-ion batteries

The development of aqueous potassium-ion batteries is limited by the lack of suitable anode materials. Here, a novel anode material, iron phosphate hydroxide hydrate Fe_1.19PO₄(OH)_0.18(H₂O)_0.3, was introduced and synthesized, which delivers considerable reversible capacities of 80 mA h g^-1 at 0.05 A g^-1. An aqueous full potassium-ion battery assembled with the K₂Zn₃(Fe(CN)₆)₂ cathode exhibits 80% capacity retention after 1000 cycles.

Wood-Derived High-Mass-Loading MnO2 Composite Carbon Electrode Enabling High Energy Density and High-Rate Supercapacitor

The simple design of a high-energy-density device with high-mass-loading electrode has attracted much attention but is challenging. Manganese oxide (MnO₂ ) with its low cost and excellent electrochemical performance shows high potential for practical application in this regard. Hence, the high-mass-loading of the MnO₂ electrode with wood-derived carbon (WC) as the current collector is reported through a convenient hydrothermal reaction for high-energy-density devices. Benefiting from the high-mass-loading of the MnO₂ electrode (WC@MnO₂ -20, ≈14.1 mg cm^-2 ) and abundant active sites on the surface of the WC hierarchically porous structure, the WC@MnO₂ -20 electrode shows remarkable high-rate performance of areal/specific capacitance ≈1.56 F cm^-2 /45 F g^-1 , compared to the WC electrode even at the high density of 20 mA cm^-2 . Furthermore, the obtained symmetric supercapacitor exhibits high areal/specific capacitances of 3.62 F cm^-2 and 87 F g^-1 at 1.0 mA cm^-2 and high energy densities of 0.502 mWh cm^-2 /12.2 Wh kg^-1 with capacitance retention of 75.2% after 10 000 long-term cycles at 20 mA cm^-2 . This result sheds light on a feasible design strategy for high-energy-density supercapacitors with the appropriate mass loading of active materials and low-tortuosity structural design while also encouraging further investigation into electrochemical storage.

Role of Polyoxometalate Contents in Polypyrrole: Linear Actuation and Energy Storage

A combination of polyoxometalates with polypyrrole is introduced in this work. Our goal was to include phosphotungstic acid (PTA) in different molar concentrations (0.005, 0.01, and 0.05 M) in the electropolymerization of pyrrole doped with dodecylbenzene sulfonate (DBS) and phosphotungstinates (PT), forming PPy/DBS-PT films. Scanning electron microscopy (SEM) revealed that the PPy/DBS-PT films became denser and more compact with increasing PTA concentrations. The incorporation of PT in PPy/DBS was analyzed using Fourier-transform infrared (FTIR) and energy dispersive X-ray (EDX) spectroscopy. The linear actuation in cyclic voltammetry and potential square wave steps in an organic electrolyte revealed increasing mixed actuation, with major expansion upon oxidation found for PPy/DBS-PT films with a PTA concentration of 0.005 M. Best results of a strain of 12.8% and stress at 0.68 MPa were obtained for PPy/DBS-PT (0.01 M). The PPy/DBS-PT films polymerized in the presence of 0.05 M of PTA and showed main expansion upon reduction, changing the actuation direction. Chronopotentiometric measurements of PPy/DBS-PT samples were conducted to determine the specific capacitance optimal for a 0.01 M PTA concentration in the range of 80 F g⁻¹ (±0.22 A g⁻¹).

Ion Intercalation in Lanthanum Strontium Ferrite for Aqueous Electrochemical Energy Storage Devices

Ion intercalation of perovskite oxides in liquid electrolytes is a very promising method for controlling their functional properties while storing charge, which opens up its potential application in different energy and information technologies. Although the role of defect chemistry in oxygen intercalation in a gaseous environment is well established, the mechanism of ion intercalation in liquid electrolytes at room temperature is poorly understood. In this study, the defect chemistry during ion intercalation of La_0.5Sr_0.5FeO_3-δ thin films in alkaline electrolytes is studied. Oxygen and proton intercalation into the La_1-xSr_xFeO_3-δ perovskite structure is observed at moderate electrochemical potentials (0.5 to -0.4 V), giving rise to a change in the oxidation state of Fe (as a charge compensation mechanism). The variation of the concentration of holes as a function of the intercalation potential is characterized by in situ ellipsometry, and the concentration of electron holes is indirectly quantified for different electrochemical potentials. Finally, a dilute defect chemistry model that describes the variation of defect species during ionic intercalation is developed.

Freestanding Metal-Organic Frameworks and Their Derivatives: An Emerging Platform for Electrochemical Energy Storage and Conversion

Metal–organic frameworks (MOFs) have recently emerged as ideal electrode materials and precursors for electrochemical energy storage and conversion (EESC) owing to their large specific surface areas, highly tunable porosities, abundant active sites, and diversified choices of metal nodes and organic linkers. Both MOF-based and MOF-derived materials in powder form have been widely investigated in relation to their synthesis methods, structure and morphology controls, and performance advantages in targeted applications. However, to engage them for energy applications, both binders and additives would be required to form postprocessed electrodes, fundamentally eliminating some of the active sites and thus degrading the superior effects of the MOF-based/derived materials. The advancement of freestanding electrodes provides a new promising platform for MOF-based/derived materials in EESC thanks to their apparent merits, including fast electron/charge transmission and seamless contact between active materials and current collectors. Benefiting from the synergistic effect of freestanding structures and MOF-based/derived materials, outstanding electrochemical performance in EESC can be achieved, stimulating the increasing enthusiasm in recent years. This review provides a timely and comprehensive overview on the structural features and fabrication techniques of freestanding MOF-based/derived electrodes. Then, the latest advances in freestanding MOF-based/derived electrodes are summarized from electrochemical energy storage devices to electrocatalysis. Finally, insights into the currently faced challenges and further perspectives on these feasible solutions of freestanding MOF-based/derived electrodes for EESC are discussed, aiming at providing a new set of guidance to promote their further development in scale-up production and commercial applications.

Multifunctional applications for waste zinc-carbon battery to synthesize carbon dots and symmetrical solid-state supercapacitors

In this study, we provide a simple and green approach to recycle waste zinc carbon batteries for making carbon dots and porous carbon material. The carbon dots are easily synthesized by one green step, the hydrothermal treatment of a carbon rod in a mixture of DI water and pure ethanol to obtain a blue fluorescence under UV light, which can be used directly as a fluorescence ink. The as-prepared carbon dot process give typical dots with a uniform diameter from 3 to 8 nm with a strong slight blue fluorescent. The porous carbon material is also recycled from carbon powder in a waste battery via one green step annealing process without any chemical activation and with a hierarchically porous structure. This porous carbon material is demonstrated as an electrode for symmetrical solid state supercapacitors (SSCs) in a sandwich structure: porous carbon/PVA–KOH/porous carbon. The SSCs using recycled porous carbon electrodes exhibit a good energy density of 4.58 W h kg⁻¹ at a power density of 375 W kg⁻¹ and 97.6% retention after 2000 cycles. The facile one green step of hydrothermal and also that of calcination provide a promising strategy to recycle waste zinc carbon batteries, which transfers the excellent applications.

In this study, we provide a simple and green approach to recycle waste zinc carbon batteries for making carbon dots and porous carbon material.

Porous organic polymers for high-performance supercapacitors

With the aim of addressing the global warming issue and fossil energy shortage, eco-friendly and sustainable renewable energy technologies are urgently needed. In comparison to energy conversion, studies on energy storage fall behind and remain largely to be explored. By storing energy from electrochemical processes at the electrode surface, supercapacitors (SCs) bridge the performance gap between electrostatic double-layer capacitors and batteries. Organic electrode materials have drawn extensive attention because of their special power density, good round trip efficiency and excellent cycle stability. Porous organic polymers (POPs) have drawn extensive attention as attractive electrode materials in SCs. In this review, we present and discuss recent advancements and design principles of POPs as efficient electrode materials for SCs from the perspectives of synthetic strategies and the structure-performance relationships of POPs. Finally, we put forward the outlook and prospects of POPs for SCs.

Recent advances in heterostructured cathodic electrocatalysts for non-aqueous Li-O2 batteries

Developing efficient energy storage and conversion applications is vital to address fossil energy depletion and global warming. Li-O2 batteries are one of the most promising devices because of their ultra-high energy density. To overcome their practical difficulties including low specific capacities, high overpotentials, limited rate capability and poor cycle stability, an intensive search for highly efficient electrocatalysts has been performed. Recently, it has been reported that heterostructured catalysts exhibit significantly enhanced activities toward the oxygen reduction reaction and oxygen evolution reaction, and their excellent performance is not only related to the catalyst materials themselves but also the special hetero-interfaces. Herein, an overview focused on the electrocatalytic functions of heterostructured catalysts for non-aqueous Li-O2 batteries is presented by summarizing recent research progress. Reduction mechanisms of Li-O2 batteries are first introduced, followed by a detailed discussion on the typical performance enhancement mechanisms of the heterostructured catalysts with different phases and heterointerfaces, and the various heterostructured catalysts applied in Li-O2 batteries are also intensively discussed. Finally, the existing problems and development perspectives on the heterostructure applications are presented.

Bio-inspired hierarchical nanoporous carbon derived from water spinach for high-performance supercapacitor electrode materials

Due to various properties, green carbon nanomaterials with high specific surface area and environmentally friendly features have aroused extensive interest in energy storage device applications. Here, we report a facile, one-step carbonization of water spinach to synthesize porous carbon that exhibits a high specific surface area of ∼1559 m2 g-1, high specific capacitance (∼1191 F g-1 at 1 A g-1), a low intercept (0.9 Ω), outstanding rate capability and superior cycling stability (94.3% capacitance retention after 10 000 cycles). Moreover, the assembled symmetric cell delivers a high energy density of ∼85 W h kg-1 at 1200 W kg-1 and ultra-high stability (loss of 6.8% after 10 000 cycles). An energy density of 49 W h kg-1 could also be achieved even with a power density of up to 24 kW kg-1, which indicates that this material could be a promising candidate for future applications in aqueous-based supercapacitors.

Recent advances in the hybridization of cellulose and carbon nanomaterials: Interactions, structural design, functional tailoring, and applications

Due to the good biocompatibility and flexibility of cellulose and the excellent optical, electronic, as well as mechanical properties of carbon nanomaterials (CNMs), cellulose/CNM hybrid materials have been widely synthesized and used in energy storage, sensors, adsorption, biomedicine, and many other fields. In this review, we present recent advances (2016-current) in the design, structural design, functional tailoring and various applications of cellulose/CNM hybrid materials. For this aim, first the interactions between cellulose and CNMs for promoting the formation of cellulose/CNM materials are analyzed, and then the hybridization between cellulose with various CNMs for tailoring the structures and functions of hybrid materials is introduced. Further, abundant applications of cellulose/CNM hybrid materials in various fields are presented and discussed. This comprehensive review will be helpful for readers to understand the functional design and facile synthesis of cellulose-based nanocomposites, and to promote the high-performance utilization and sustainability of biomass materials in the future.

Unprecedented Duel Role of Polyaniline for Enhanced Pseudocapacitance of Cobalt-iron Layered Double Hydroxide

Creating nanosized pores in layered materials can increase the abundant active surface area and boost potential applications of energy storage devices. Herein, a unique synthetic strategy based on the polyaniline (PANI) doped two-dimensional (2D) cobalt-iron layered double hydroxide (CoFe-LDH/P) nanomaterials are being designed, and the formation of pores at low temperature (80 °C) is developed. It is found that the optimized concentration of PANI creates the nanopores on the CoFe-LDH nanosheets among all other polymers. The well-ordered pores of CoFe-LDH/P allow the high accessibility of the redox-active sites and promote effective ion diffusion. The optimized CoFe-LDH/P2 cathode reveals a specific capacitance 1686 (1096 Cg^-1 ) and 1200 Fg^-1 (720 Cg^-1 ) at 1 and 30 Ag^-1 respectively, a high rate capability (71.2%), and a long cycle life (98% over 10000 cycles) for supercapcitor applications. Charge storage analysis suggested that the CoFe-LDH/P2 electrode displays like a capacitive-type storage mechanism (69% capacitive at 1 mVs^-1 ). Moreover, an asymmetric aqueous supercapacitor (CoFe-LDH/P2//AC) was fabricated, delivering the excellent energy density (75.9 Wh kg^-1 at 1124 W kg^-1 ) with outstanding stability (97.5%) over 10000 cycles. This work opens a new avenue for designing porous 2D materials at low temperature for aqueous energy storage devices. This article is protected by copyright. All rights reserved.

Ultrathin Polypyrrole Layers Boosting MoO3 as Both Cathode and Anode Materials for a 2.0 V High-Voltage Aqueous Supercapacitor

An aqueous supercapacitor is an emerging energy storage unit on account of its low cost, fast energy delivery rate, and long service life. The energy density of an aqueous supercapacitor can be enlarged via extending the voltage window of electrode materials, while the aqueous electrolyte remains thermodynamically constant at 1.23 V. Herein, an aqueous supercapacitor with a 2.0 V high-voltage window is realized by core-shell MoO_3-x/polypyrrole (MP) nanocomposites as both cathode and anode materials. The ultrathin PPy layer on the MoO₃ core not only improves the conductivity and cycle stability of the nanocomposites but also acts as a reductant, leading to the formation of oxygen vacancies in the MoO₃ core. When used as a cathode material, the potential range of the as-obtained MP nanocomposite is up to 1.0 V. As an anode material, the stable potential range could reach -1.0 V. Due to the large potential range of the cathode and anode, the as-obtained 2.0 V aqueous supercapacitor shows a remarkably high delivery energy of 58.5 Wh kg^-1. The synthesis of MP nanocomposites is simple and the electrode performance is significantly enhanced; thus, it is a suitable candidate for high-energy-density aqueous supercapacitors.