Recent advances in activating surface reconstruction for the high-efficiency oxygen evolution reaction

Electrocatalytic Mechanism of Defect in Spinels for Water and Organics Oxidation

Spinels display promising electrocatalytic ability for oxygen evolution reaction (OER) and organics oxidation reaction because of flexible structure, tunable component, and multifold valence. Unfortunately, limited exposure of active sites, poor electronic conductivity, and low intrinsic ability make the electrocatalytic performance of spinels unsatisfactory. Defect engineering is an effective method to enhance the intrinsic ability of electrocatalysts. Herein, the recent advances in defect spinels for OER and organics electrooxidation are reviewed. The defect types that exist in spinels are first introduced. Then the catalytic mechanism and dynamic evolution of defect spinels during the electrochemical process are summarized in detail. Finally, the challenges of defect spinel electrocatalysts are brought up. This review aims to deepen the understanding about the role and evolution of defects in spinel for electrochemical water/organics oxidation and provide a significant reference for the design of efficient defect spinel electrocatalysts.

Recent advances in iridium-based catalysts with different dimensions for the acidic oxygen evolution reaction

Proton exchange membrane (PEM) water electrolysis is considered a promising technology for green hydrogen production, and iridium (Ir)-based catalysts are the best materials for anodic oxygen evolution reactions (OER) owing to their high stability and anti-corrosion ability in a strong acid electrolyte. The properties of Ir-based nanocatalysts can be tuned by rational dimension engineering, which has received intensive attention recently for catalysis ability boosting. To achieve a comprehensive understanding of the structural and catalysis performance, herein, an overview of the recent progress was provided for Ir-based catalysts with different dimensions for the acidic OER. The promotional effect was first presented in terms of the nano-size effect, synergistic effect, and electronic effect based on the dimensional effect, then the latest progress of Ir-based catalysts classified into zero-dimensional (0D), one-dimensional (1D), two-dimensional (2D) and three-dimensional (3D) catalysts was introduced in detail; and the practical application of some typical examples in the real PEM water electrolyzers (PEMWE) was also presented. Finally, the problems and challenges faced by current dimensionally engineered Ir-based catalysts in acidic electrolytes were discussed. It is concluded that the increased surface area and catalytic active sites can be realized by dimensional engineering strategies, while the controllable synthesis of different dimensional structured catalysts is still a great challenge, and the correlation between structure and performance, especially for the structural evolution during the electrochemical operation process, should be probed in depth. Hopefully, this effort could help understand the progress of dimensional engineering of Ir-based catalysts in OER catalysis and contribute to the design and preparation of novel efficient Ir-based catalysts.

Iron atomic cluster supported on Co/NC having superior water oxidation activity over iron single atom

Carbon-supported iron-cobalt bimetallic electrocatalysts usually exhibit robust catalytic activity toward the oxygen evolution reaction (OER). However, the spatial isolation of Fe species at atomic level on cobalt-carbon solid remains a great challenge for practical catalytic applications in the OER. Here, we report the fabrication of CoFe bimetal porous carbon electrocatalysts by pyrolysis of molecularly defined iron complexes such as FePc (Pc = phthalocyanine) and Fe(acac)₃ pre-encapsulated in the cavities of zeolitic imidazolate framework (ZIF)-67. With this unique strategy, high-loading atomic Fe nanoclusters (Fe-ACs) and Fe single atoms (Fe-SAs) were supported on Co/NC hybrids relying on the size of the molecular Fe precursors. The former exhibited superior OER performance to the single Fe atom-decorated Co/NC, as well as other ZIF-67-derived electrocatalysts. Theoretical modulation suggests Co as the OER active site for Fe-ACs@Co/NC at the in situ-formed FeOOH-ACs/Co₃O₄ interface, while Fe was proposed as the active site for Fe-SAs@Co/NC.

High-Entropy Layered Double Hydroxides with Highly Adjustable Components for Enhancing Electrocatalytic Oxygen Evolution

The main obstacle to the development of large-scale electrochemical hydrogen production based on water splitting is the slow four-electron kinetics of OER (oxygen evolution reaction). The most efficient method is to create sophisticated and effective OER catalysts. Here, we proposed the controlled synthesis of high-entropy layered double hydroxides (HELDH) for wide component regulation and the component design of high OER activity to make up for the restricted component regulation in conventional catalysts. Through the use of coprecipitation and hydrothermal synthesis, the representative sample (MgCoNi)3(FeAl)-LDH is created and systematically characterized. Significantly, this technique of preparation may generically synthesize a variety of HELDH with various component combinations, demonstrating the remarkable adaptability of the HELDH components. Subsequently, (FeCoNi)3(FeCr)-LDH with high OER activity is designed and synthesized. (FeCoNi)3(FeCr)-LDH shows excellent OER activity (overpotential is only 230 mV at 10 mA cm-2). A new platform for the creation of high-performance catalysts and high-entropy materials was established by the synthesis and design of HELDH.

Corrosion Engineering towards NiFe-Layered Double Hydroxide Macroporous Arrays with Enhanced Activity and Stability for Oxygen Evolution Reaction

NiFe-layered double hydroxide (NiFe-LDH) is the benchmark catalyst for the oxygen evolution reaction (OER) in alkaline medium, however, it is still challenging to improve its activity and stability. Herein, NiFe-LDH macroporous array electrodes are demonstrated to significantly enhance the activity and stability for oxygen evolution reaction. The electrodes are fabricated by the chemical and electrochemical corrosion process of Ni foam induced by ferric nitrate, hydrochloric acid and oxygen. By optimizing the amount of iron salt and acid and selecting the appropriate reaction temperature and time, the NiFe-LDH electrodes only need the overpotential of 180 mV and 248 mV to reach the current density of 10 mA cm-2 and 500 mA cm-2 , respectively, and remain highly stable for 1000 h at 500 mA cm-2 . The unique macroporous array not only significantly increases the active area of NiFe-LDH catalyst, but also creates a stable nanostructure that avoids severe reconstruction.

Strain and Surface Engineering of Multicomponent Metallic Nanomaterials with Unconventional Phases

Multicomponent metallic nanomaterials with unconventional phases show great prospects in electrochemical energy storage and conversion, owing to unique crystal structures and abundant structural effects. In this review, we emphasize the progress in the strain and surface engineering of these novel nanomaterials. We start with a brief introduction of the structural configurations of these materials, based on the interaction types between the components. Next, the fundamentals of strain, strain effect in relevant metallic nanomaterials with unconventional phases, and their formation mechanisms are discussed. Then the progress in surface engineering of these multicomponent metallic nanomaterials is demonstrated from the aspects of morphology control, crystallinity control, surface modification, and surface reconstruction. Moreover, the applications of the strain- and surface-engineered unconventional nanomaterials mainly in electrocatalysis are also introduced, where in addition to the catalytic performance, the structure-performance correlations are highlighted. Finally, the challenges and opportunities in this promising field are prospected.

Manipulating the Dynamic Self-Reconstruction of CoP Electrocatalyst Driven by Charge Transport and Ion Leaching

Surface reconstruction of electrocatalysts is very important to clarify the structure-component-activity relationship. In this work, in situ Raman and ex situ technologies are used to capture the surface structure evolution of F-Fe-CoP during the oxygen evolution reaction (OER). The results reveal that the leaching of F accelerates the dynamic reconstruction response of CoP to rapidly convert into active (oxy)hydroxide species. The further introduction of Fe can accelerate the charge transfer rate and alleviate the structural stacking caused by insufficient kinetics. The introduction of F and Fe increases the electron occupation states of cobalt sites and promotes the adsorption of OH- ions on the CoP catalyst, which significantly improves the OER performance. F-Fe-CoP exhibits excellent OER performance with an overpotential of 259 mV at 20 mA cm-2 . This finding enriches the OER mechanism associated with the surface reconstruction of CoP and provides a reference for the rational design of efficient electrocatalysts.

High-Valence Oxides for High Performance Oxygen Evolution Electrocatalysis

Valence tuning of transition metal oxides is an effective approach to design high-performance catalysts, particularly for the oxygen evolution reaction (OER) that underpins solar/electric water splitting and metal-air batteries. Recently, high-valence oxides (HVOs) are reported to show superior OER performance, in association with the fundamental dynamics of charge transfer and the evolution of the intermediates. Particularly considered are the adsorbate evolution mechanism (AEM) and the lattice oxygen-mediated mechanism (LOM). High-valence states enhance the OER performance mainly by optimizing the eg -orbital filling, promoting the charge transfer between the metal d band and oxygen p band. Moreover, HVOs usually show an elevated O 2p band, which triggers the lattice oxygen as the redox center and enacts the efficient LOM pathway to break the "scaling" limitation of AEM. In addition, oxygen vacancies, induced by the overall charge-neutrality, also promote the direct oxygen coupling in LOM. However, the synthesis of HVOs suffers from relatively large thermodynamic barrier, which makes their preparation difficult. Hence, the synthesis strategies of the HVOs are discussed to guide further design of the HVO electrocatalysts. Finally, further challenges and perspectives are outlined for potential applications in energy conversion and storage.

Synergy of dual-atom catalysts deviated from the scaling relationship for oxygen evolution reaction

Dual-atom catalysts, particularly those with heteronuclear active sites, have the potential to outperform the well-established single-atom catalysts for oxygen evolution reaction, but the underlying mechanistic understanding is still lacking. Herein, a large-scale density functional theory is employed to explore the feasibility of *O-*O coupling mechanism, which can circumvent the scaling relationship with improving the catalytic performance of N-doped graphene supported Fe-, Co-, Ni-, and Cu-containing heteronuclear dual-atom catalysts, namely, M'M@NC. Based on the constructed activity maps, a rationally designed descriptor can be obtained to predict homonuclear catalysts. Seven heteronuclear and four homonuclear dual-atom catalysts possess high activities that outperform the minimum theoretical overpotential. The chemical and structural origin in favor of *O-*O coupling mechanism thus leading to enhanced reaction activity have been revealed. This work not only provides additional insights into the fundamental understanding of reaction mechanisms, but also offers a guideline for the accelerated discovery of efficient catalysts.

Regulating the Spin State of Metal and Metal Carbide Heterojunctions for Efficient Oxygen Evolution

Developing high-performance electrocatalysts for oxygen evolution reaction (OER) is of importance for improving the overall efficiency of water splitting. Herein, the CoFe/(Co_xFe_1-x)₃Mo₃C heterojunction is purposely designed as an OER catalyst, which displays a low overpotential of 293 mV for affording a current density of 10 mA cm^-2 and a small Tafel slope of 48 mV/dec. Various characterization results demonstrate that the significant work-function difference between CoFe and (Co_xFe_1-x)₃Mo₃C can induce interfacial charge redistribution, which results in the formation of Co and Fe sites with a high-spin state, thus stimulating the surface phase reconstruction of CoFe/(Co_xFe_1-x)₃Mo₃C to corresponding active oxyhydroxide. Meanwhile, the electrochemical leaching of Mo ions from the initial structure can contribute to the formation of defective sites, further benefiting OH^- adsorption and surface oxidation. Moreover, the remaining CoFe can accelerate electron migration during the electrocatalytic process. This study presents new insights into constructing efficient OER electrocatalysts with an optimized spin-state configuration via interfacial engineering.

Ligand leaching enabling improved electrocatalytic oxygen evolution performance

Design and fabrication of cost-effective (pre-)catalysts are important for water splitting and metal-air batteries. In this direction, various metal-organic frameworks (MOFs) have been investigated as pre-catalysts for oxygen evolution. However, the activation process and the complex reconstruction behaviour of these MOFs are not well understood. Herein, square-like MOF nanosheets in which carbon nanotubes were embedded were prepared by introducing an amine ligand to coordinate with Ni ions and then reacting with [Fe(CN)₆]^3-. The formed MOF nanosheets containing nickel and iron species were then activated by NaBH₄, inducing the leaching of ligands and the formation of tiny active species in situ loaded on carbon nanotubes. The prepared catalyst shows superior oxygen evolution performance with an ultralow overpotential of 231 mV for 10 mA cm^-2, a fast reaction kinetics with a small Tafel slope of 52.3 mV dec^-1, and outstanding catalysis stability. The excellent electrocatalytic performance for oxygen evolution can be attributed to the structural advantage of in situ derived small sized active species and one-dimensional conductive networks. This work provides a new thought for the enhancement of the electrocatalytic performance of MOF materials.

Artificial Photosynthesis: Current Advancements and Future Prospects

Artificial photosynthesis is a technology with immense potential that aims to emulate the natural photosynthetic process. The process of natural photosynthesis involves the conversion of solar energy into chemical energy, which is stored in organic compounds. Catalysis is an essential aspect of artificial photosynthesis, as it facilitates the reactions that convert solar energy into chemical energy. In this review, we aim to provide an extensive overview of recent developments in the field of artificial photosynthesis by catalysis. We will discuss the various catalyst types used in artificial photosynthesis, including homogeneous catalysts, heterogeneous catalysts, and biocatalysts. Additionally, we will explore the different strategies employed to enhance the efficiency and selectivity of catalytic reactions, such as the utilization of nanomaterials, photoelectrochemical cells, and molecular engineering. Lastly, we will examine the challenges and opportunities of this technology as well as its potential applications in areas such as renewable energy, carbon capture and utilization, and sustainable agriculture. This review aims to provide a comprehensive and critical analysis of state-of-the-art methods in artificial photosynthesis by catalysis, as well as to identify key research directions for future advancements in this field.

Lattice-disordered high-entropy metal hydroxide nanosheets as efficient precatalysts for bifunctional electro-oxidation

Electro-oxidation reactions (EORs) are important half reactions in overall and assisted water electrolysis, which are crucial in achieving economic and sustainable hydrogen production and realizing simultaneous wastewater treatment. Current studies indicate that the high-valence metal ions that are locally enriched in the catalysts or generated in situ during the anodic preoxidation process are active species for EORs. Hence, designing (pre)catalysts with enriched local active sites and boosted preoxidation is of great importance. In this work, with a focus on improving the EOR performance toward the oxygen evolution reaction (OER) and the urea oxidation reaction (UOR), we fabricated a lattice-disordered high-entropy FeCuCoNiZn hydroxide nanoarray catalyst that exhibits robust bifunctional OER and UOR behavior. The high-entropy feature could bring in a unique catalytic ensemble effect and remarkably improve the intrinsic OER/UOR activity. The lattice-disordered structure could not only enrich the local high-valence metal ions as active sites but also provide abundant reactive surface sites to accelerate the preoxidation process, thus leading to enriched active sites for the OER and UOR. Benefitting from the structural merits, the lattice-disordered high-entropy catalyst exhibits excellent OER and UOR activity with low overpotential, large current density and enhanced intrinsic activity, and no performance degradation but dramatic 35.3% and 88.7% enhancement in activity can be achieved during the long-term OER and UOR tests, respectively. The robust OER and UOR performance makes the lattice-disordered high-entropy catalyst a promising candidate for overall and urea-assisted water electrolysis from industrial, agricultural and sanitary wastewater.

Sodium Tartrate-Assisted Synthesis of High-Purity NiFe2O4 Nano-Microrods Supported by Porous Ketjenblack Carbon for Efficient Alkaline Oxygen Evolution

Herein, a simple two-step synthetic method was developed for the synthesis of NiFe₂O₄ nano-microrods supported on Ketjenblack carbon (NiFe₂O₄/KB). A sodium tartrate-assisted hydrothermal method was employed for the synthesis of a NiFe-MOF/KB precursor, which was then pyrolyzed under N₂ at 500 °C to yield NiFe₂O₄/KB. Benefiting from the presence of high-valence Ni³⁺ and Fe³⁺, high conductivity, and a large electrochemically active surface area, NiFe₂O₄/KB delivered outstanding OER electrocatalytic performance under alkaline conditions, including a very low overpotential of 258 mV (vs RHE) at 10 mA cm^-2, a small Tafel slope of 43.01 mV dec^-1, and excellent durability in 1.0 M KOH. Density functional theory calculations verified the superior alkaline OER electrocatalytic activity of NiFe₂O₄ to IrO₂. While both catalysts possessed a similar metallic ground state, NiFe₂O₄ offered a lower energy barrier in the rate-determining OER step (*OOH → O₂) compared to IrO₂, resulting in faster OER kinetics.

Hierarchical porous Fe-N/C@surfactant composites synthesized by a surfactant-assisted strategy as high-performance bifunctional oxygen electrodes for rechargeable zinc-air batteries

Herein, a soft-template strategy involving the cationic surfactants has been successfully applied to size-controlled synthesis of hierarchical porous Fe-N/C for the first time. Specifically, a small amount of Fe and cationic surfactants can be uniformly doped into the zinc-based zeolite imidazole framework (ZIF-8) crystal particles and the cationic surfactants play a critical role in the formation of hierarchically porous Fe-ZIF-8@surfactant precursors. When the Fe-ZIF-8@surfactant is subsequently pyrolyzed, atomically dispersed Fe-N_x coordination structures can be in-situ converted to Fe-N/C, while the cationic surfactants decompose to form a carbon matrix to encapsulate the active sites, thereby preventing the aggregation of nanoparticles to a certain extent. As a result, the combined Fe nanocrystals and atomically dispersed Fe-N_x in the graphitic carbon matrix generate a synergistic effect to boost the electrocatalytic behaviors with a more positive half-wave potential (0.92 V) for oxygen reduction reaction (ORR) and a lower overpotential (420 mV at 10 mA cm^-2) for oxygen evolution reaction (OER). As a proof of concept, the Fe-N/C@TTAB based zinc-air batteries (ZABs) present an outstanding peak power density (107.9 mW cm^-2) and a superior specific capacity (706.3 mAh g^-1) with robust cycling stability over 900 cycles for 150 h, which are better than the commercial Pt/C + IrO₂ based ZABs.

Transforming NiCo2O4 nanorods into nanoparticles using citrus lemon juice enhancing electrochemical properties for asymmetric supercapacitor and water oxidation

Recently, the nanostructured nickel-cobalt bimetallic oxide (NiCo₂O₄) material with high electrochemical activity has received intensive attention. Beside this, the biomass assisted synthesis of NiCo₂O₄ is gaining popularity due to its advantageous features such as being low cost, simplicity, minimal use of toxic chemicals, and environment-friendly and ecofriendly nature. The electrochemical activity of spinel NiCo₂O₄ is associated with its mixed metal oxidation states. Therefore, much attention has been paid to the crystal quality, morphology and tunable surface chemistry of NiCo₂O₄ nanostructures. In this study, we have used citrus lemon juice consisting of a variety of chemical compounds having the properties of a stabilizing agent, capping agent and chelating agent. Moreover, the presence of several acidic chemical compounds in citrus lemon juice changed the pH of the growth solution and consequently we observed surface modified and structural changes that were found to be very effective for the development of energy conversion and energy storage systems. These naturally occurring compounds in citrus lemon juice played a dynamic role in transforming the nanorod morphology of NiCo₂O₄ into small and well-packed nanoparticles. Hence, the prepared NiCo₂O₄ nanostructures exhibited a new surface-oriented nanoparticle morphology, high concentration of defects on the surface (especially oxygen vacancies), sufficient ionic diffusion and reaction of electrolytic ions, enhanced electrical conductivity, and favorable reaction kinetics at the interface. The electrocatalytic properties of the NiCo₂O₄ nanostructures were studied in oxygen evolution reaction (OER) at a low overpotential of 250 mV for 10 mA cm^-2, Tafel slope of 98 mV dec^-1, and durability of 40 h. Moreover, an asymmetric supercapacitor was produced and the obtained results indicated a high specific capacitance of (C_s) of 1519.19 F g^-1, and energy density of 33.08 W h kg^-1 at 0.8 A g^-1. The enhanced electrochemical performance could be attributed to the favorable structural changes, surface modification, and surface crystal facet exposure due to the use of citrus lemon juice. The proposed method of transformation of nanorod to nanoparticles could be used for the design of a new generation of efficient electrocatalyst materials for energy storage and conversion uses.

Photothermal Catalytic CO2 Conversion: Beyond Catalysis and Photocatalysis

In recent years, the combination of both thermal and photochemical contributions has provided interesting opportunities for solar upgrading of catalytic processes. Photothermal catalysis works at the interface between purely photochemical processes, which involve the direct conversion of photon energy into chemical energy, and classical thermal catalysis, in which the catalyst is activated by temperature. Thus, photothermal catalysis acts in two different ways on the energy path of the reaction. This combined catalysis, of which the fundamental principles will be reviewed here, is particularly promising for the activation of small reactive molecules at moderate temperatures compared to thermal catalysis and with higher reaction rates than those attained in photocatalysis, and it has gained a great deal of attention in the last years. Among the different applications of photothermal catalysis, CO₂ conversion is probably the most studied, although reaction mechanisms and photonic-thermal synergy pathways are still quite unclear and, from the reaction route point of view, it can be said that photothermal-catalytic CO₂ reduction processes are still in their infancy. This article intends to provide an overview of the principles underpinning photothermal catalysis and its application to the conversion of CO₂ into useful molecules, with application essentially as fuels but also as chemical building blocks. The most relevant specific cases published to date will be also reviewed from the viewpoint of selectivity towards the most frequent target products.

Construction of NiFe(CN)5NO/Ni3S2 hierarchical submicro-rods on nickel foam as advanced oxygen evolution electrocatalysts

The development of cheap, abundant, and highly efficient electrocatalysts for the oxygen evolution reaction (OER) is urgently needed for hydrogen production from water splitting. Herein, we demonstrate a novel OER electrocatalyst (NiFe(CN)₅NO/Ni₃S₂) prepared by coupling Ni₃S₂ and a bimetallic metal-organic framework (MOF) of NiFe(CN)₅NO on nickel foam (NF) via a simple two-step route. The NiFe(CN)₅NO/Ni₃S₂ electrocatalyst displays an interesting rod-like hierarchical architecture assembled by ultrathin nanosheets. The combination of NiFe(CN)₅NO and Ni₃S₂ optimizes the electronic structure of the metal active sites and increases the electron transfer capability. Benefitting from the synergistic effect between Ni₃S₂ and the NiFe-MOF as well as the unique hierarchical architecture, the NiFe(CN)₅NO/Ni₃S₂/NF electrode exhibits excellent electrocatalytic OER activity with ultralow overpotentials of 162/197 mV at 10/100 mA cm^-2 and an ultrasmall Tafel slope of 26 mV dec^-1 in 1.0 M KOH, which are far superior to those of the individual NiFe(CN)₅NO, Ni₃S₂ and commercial IrO₂ catalysts. In particular, unlike common metal sulfide-based electrocatalysts, the composition, morphology and microstructure of the NiFe-MOF/Ni₃S₂ composite electrocatalyst can be well retained after the OER, which endows it with fantastic long-term durability. This work offers a new strategy for the construction of novel and high-efficiency MOF-based composite electrocatalysts for energy applications.

Engineering Amorphous/Crystalline Ru(OH)3/CoFe-Layered Double Hydroxide for Hydrogen Evolution at 1000 mA cm-2

For large-scale industrial applications, it is highly desirable to create effective, economical electrocatalysts with long-term stability for the hydrogen evolution reaction (HER) at a large current density. Herein, we report a unique motif with crystalline CoFe-layered hydroxide (CoFe-LDH) nanosheets enclosed by amorphous ruthenium hydroxide (a-Ru(OH)₃/CoFe-LDH) to realize the efficient hydrogen production at 1000 mA cm^-2, with a low overpotential of 178 mV in alkaline media. During the continuous HER process for 40 h at such a large current density, the potential remains almost constant with only slight fluctuations, indicating good long-term stability. The remarkable HER performance can be attributed to the charge redistribution caused by abundant oxygen vacancies in a-Ru(OH)₃/CoFe-LDH. The increased electron density of states lowers the charge-transfer resistance and promotes the formation and release of H₂ molecules. The water-splitting electrolyzer with a-Ru(OH)₃/CoFe-LDH as both an anode and a cathode in 1.0 M KOH demonstrates stable hydrogen production and a 100% faradic efficiency. The design strategy of interface engineering in this work will inspire the design of practical electrocatalysts for water splitting on an industrial scale.

Selective Ethylene Glycol Oxidation to Formate on Nickel Selenide with Simultaneous Evolution of Hydrogen

There is an urgent need for cost-effective strategies to produce hydrogen from renewable net-zero carbon sources using renewable energies. In this context, the electrochemical hydrogen evolution reaction can be boosted by replacing the oxygen evolution reaction with the oxidation of small organic molecules, such as ethylene glycol (EG). EG is a particularly interesting organic liquid with two hydroxyl groups that can be transformed into a variety of C1 and C2 chemicals, depending on the catalyst and reaction conditions. Here, a catalyst is demonstrated for the selective EG oxidation reaction (EGOR) to formate on nickel selenide. The catalyst nanoparticle (NP) morphology and crystallographic phase are tuned to maximize its performance. The optimized NiS electrocatalyst requires just 1.395 V to drive a current density of 50 mA cm^-2 in 1 m potassium hydroxide (KOH) and 1 m EG. A combination of in situ electrochemical infrared absorption spectroscopy (IRAS) to monitor the electrocatalytic process and ex situ analysis of the electrolyte composition shows the main EGOR product is formate, with a Faradaic efficiency above 80%. Additionally, C2 chemicals such as glycolate and oxalate are detected and quantified as minor products. Density functional theory (DFT) calculations of the reaction process show the glycol-to-oxalate pathway to be favored via the glycolate formation, where the CC bond is broken and further electro-oxidized to formate.

Enhanced OER Performance and Dynamic Transition of Surface Reconstruction in LaNiO3 Thin Films with Nanoparticles Decoration

In an electrocatalytic process, the cognition of the active phase in a catalyst has been regarded as one of the most vital issues, which not only boosts the fundamental understanding of the reaction procedure but also guides the engineering and design for further promising catalysts. Here, based on the oxygen evolution reaction (OER), the stepwise evolution of the dominant active phase is demonstrated in the LaNiO3 (LNO) catalyst once the single-crystal thin film is decorated by LNO nanoparticles. It is found that the OER performance can be dramatically improved by this decoration, and the catalytic current density at 1.65 V can be enhanced by ≈1000% via ≈109 cm-2 nanoparticle adhesion after extracting the contribution of surface enlargement. Most importantly, a transition of the active phase from LNO to NiOOH via surface reconstruction with the density of LNO nanoparticles is demonstrated. Several mechanisms in terms of this active phase transition are discussed involving lattice orientation-induced change of the surface energy profile, the lattice oxygen participation, and the A/B-site ions leaching during OER cycles. This study suggests that the active phases in transition metal-based OER catalysts can transform with morphology, which should be corresponding to distinct engineering strategies.

Navigating surface reconstruction of spinel oxides for electrochemical water oxidation

Understanding and mastering the structural evolution of water oxidation electrocatalysts lays the foundation to finetune their catalytic activity. Herein, we demonstrate that surface reconstruction of spinel oxides originates from the metal-oxygen covalency polarity in the M_T-O-M_O backbone. A stronger M_O-O covalency relative to M_T-O covalency is found beneficial for a more thorough reconstruction towards oxyhydroxides. The structure-reconstruction relationship allows precise prediction of the reconstruction ability of spinel pre-catalysts, based on which the reconstruction degree towards the in situ generated oxyhydroxides can be controlled. The investigations of oxyhydroxides generated from spinel pre-catalysts with the same reconstruction ability provide guidelines to navigate the cation selection in spinel pre-catalysts design. This work reveals the fundamentals for manipulating the surface reconstruction of spinel pre-catalysts for water oxidation.

Lattice Strain Mediated Reversible Reconstruction in CoMoO4·0.69H2O for Intermittent Oxygen Evolution

A heterogeneous interface usually plays a versatile role in modulating catalysis and the durability of hybrid electrocatalysts for oxygen evolution reaction (OER), and its intrinsic mechanism is still in dispute due to an uncertain correlation of initial, intermediate and active phases. In this article, the CoMoO₄·0.69H₂O/Co₃O₄ heterogeneous interface is configured to understand the evolution kinetics of these correlated phases. Due to the chemically and electrochemically "inert" character of Co₃O₄ support, lattice strain with 3.31% tuning magnitude in primary CoMoO₄·0.69H₂O can be inherited after spontaneous dissolution of molybdenum cations in electrolyte, dominating catalytic activity of the reconstructed CoOOH. In situ Raman spectroscopy demonstrates reversible conversion between active CoOOH and amorphous cobalt oxide during OER when positive and negative potentials are sequentially supplied onto hybrid catalysts with favorable strain. Therefore, superior durability with negligible decay after 10 cycles is experimentally identified for intermittent oxygen evolution. Theoretical calculations indicate that appropriate stress within the electrocatalyst could reduce the reaction energy barrier and enhance the OER performance by optimizing the adsorption of intermediates.

How Size and Strain Effect Synergistically Improve Electrocatalytic Activity: A Systematic Investigation Based on PtCoCu Alloy Nanocrystals

To reveal how the size effect and strain effect synergistically regulate the mass activity (MA) and specific activity (SA) of Pt alloy nanocrystal catalysts in oxygen reduction reaction (ORR), remains to be difficult due to the highly entangled factors. In this work, six ternary PtCoCu catalysts with sequentially changed composition, size, and compression strain are prepared. It is found that the smaller the alloy particles, the higher the electrochemical active surface area (ECSA) and MA values, that is, the particle size plays a decisive role in the size of the ECSA and MA. While, along alloy size decrease, the intrinsic activity SA first increases, then remains unchanged, and finally rapidly increases again. This detailed analysis shows that for the alloys above 4 nm, it is the surface coordination number that decides the SA, while for those below 4 nm, it is the well-regulated compression strain that determines the SA. Particularly, Pt₄₇ Co₂₆ Cu₂₇ demonstrates the MA of 1.19 A mg_Pt ^-1 and SA of 1.48 mA cm^-2 , being 7.9 and 6.4 times those of commercial Pt/C respectively, representing an especially superior ORR catalyst.

Synergistic Effect of N-NiMoO4 /Ni Heterogeneous Interface with Oxygen Vacancies in N-NiMoO4 /Ni/CNTs for Superior Overall Water Splitting

The exploring of economical, high-efficiency, and stable bifunctional catalysts for hydrogen evolution and oxygen evolution reactions (HER/OER) is highly imperative for the development of electrolytic water. Herein, a 3D cross-linked carbon nanotube supported oxygen vacancy (V_o )-rich N-NiMoO₄ /Ni heterostructure bifunctional water splitting catalyst (N-NiMoO₄ /Ni/CNTs) is synthesized by hydrothermal-H₂ calcination method. Physical characterization confirms that V_o -rich N-NiMoO₄ /Ni nanoparticles with an average size of ≈19 nm are secondary aggregated on CNTs that form a hierarchical porous structure. The formation of Ni and NiMoO₄ heterojunctions modify the electronic structure of N-NiMoO₄ /Ni/CNTs. Benefiting from these properties, N-NiMoO₄ /Ni/CNTs drives an impressive HER overpotential of only 46 mV and OER overpotential of 330 mV at 10 mA cm^-2 , which also shows exceptional cycling stability, respectively. Furthermore, the as-assembled N-NiMoO₄ /Ni/CNTs||N-NiMoO₄ /Ni/CNTs electrolyzer reaches a cell voltage of 1.64 V at 10 mA cm^-2 in alkaline solution. Operando Raman analysis reveals that surface reconstruction is essential for the improved catalytic activity. Density functional theory (DFT) calculations further demonstrate that the enhanced HER/OER performance should be attributed to the synergistic effect of V_o and heteostructure that improve the conductivity of N-NiMoO₄ /Ni/CNTs and facilitatethe desorption of reaction intermediates.

Dopant-Induced Surface Self-Etching of Cobalt Carbonate Hydroxide Boosts Efficient Water Splitting

Herein, vanadium-doped cobalt carbonate hydroxide, V-CoCH, was synthesized as efficient catalyst for water splitting. Vanadium species were partially dissolved in the early stages of the oxygen-evolution reaction (OER), inducing self-etching of the catalyst surface, which is helpful for catalyst surface reconstruction and resulted in a higher number of active sites and oxygen vacancies. The synergy between V-doping and oxygen vacancies improved the catalytic activity: V-CoCH showed an exceptional OER catalytic performance with an overpotential of 183 mV at 10 mA cm^-2 . The water-splitting cell consisting of V-CoCH only required 1.52 V to reach 10 mA cm^-2 . Theoretical calculations revealed that vanadium in V-CoCH played an important role in electron regulation of active sites. The oxygen vacancies had an important effect on improvement of the OER performance through not only the exposure of more active sites but also through modulation of the electronic structure. This work provides an effective strategy for constructing high-performance electrocatalysts.

Defective multi-element hydroxides nanosheets for rapid removal of anionic organic dyes from water and oxygen evolution reaction

Water pollution by dyes is one of the biggest environmental problems. Adsorption technology has been widely used in wastewater treatment. In this work, high-entropy concept is used to design surface defective hydroxides realizing the rapid removal of dyes from water. Multi-element hydroxides (MEHs) containing three (CoMnNi, MEH-Ternary), four (CoMnNiZn, MEH-Quaternary), and five (CoMnNiZnFe, MEH-Quinary) metal elements are successfully synthesized through a polyol process. These as-synthesized MEHs are composed of nanosheets with a brucite-like structure. Along with the increase in compositional complexity (i.e., configurational entropy), the thickness of the nanosheets in these MEHs decreases, while the degree of surface defects increase. These surface defects are probably the active sites for anionic dyes adsorption, suggesting rapid adsorption kinetics with shortened diffusion path length. For MEH-Quinary in 0.2 mM Congo red (CR) and MEH-Ternary in 0.4 mM methyl orange (MO) aqueous solutions, respectively, high removal efficiency > 99.0% is achieved in the first 30 s. Their pseudo-second-order rate constants are two orders of magnitude higher than that of activated carbon and hydrotalcite. MEH-Quinary has maximum CR and MO adsorption quantity of 546.4 and 404.9 mg g^-1, respectively, by Langmuir model. The MEH-Quinary is also a potential electrocatalyst for oxygen evolution reaction.

IrPd Nanoalloy-Structured Bifunctional Electrocatalyst for Efficient and pH-Universal Water Splitting

The lack of high efficiency and pH-universal bifunctional electrocatalysts for water splitting to hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) hinders the large-scale production of green hydrogen. Here, an IrPd electrocatalyst supported on ketjenblack that exhibits outstanding bifunctional performance for both HER and OER at wide pH conditions is presented. The optimized IrPd catalyst exhibits a specific activity of 4.46 and 3.98 A mg_Ir ^-1 in the overpotential of 100 and 370 mV for HER and OER, respectively, in alkaline conditions. When applied to the anion exchange membrane electrolyzer, the Ir₄₄ Pd₅₆ /KB catalyst shows a stability of >20 h at a current of 250 mA cm^-2 for water decomposition, indicating promising prospects for practical applications. Beyond offering an advanced electrocatalyst, this work also guides the rational design of desirable bifunctional electrocatalysts for HER and OER by regulating the microenvironments and electronic structures of metal catalytic sites for diverse catalysis.

Magnetic Heating Amorphous NiFe Hydroxide Nanosheets Encapsulated Ni Nanoparticles@Wood Carbon to Boost Oxygen Evolution Reaction Activity

The oxygen evolution reaction (OER) has significant effects on the water-splitting process and rechargeable metal-air batteries; however, the sluggish reaction kinetics caused by the four-electron transfer process for transition metal catalysts hinder large-scale commercialization in highly efficient electrochemical energy conversion devices. Herein, a magnetic heating-assisted enhancement design for low-cost carbonized wood with high OER activity is proposed, in which Ni nanoparticles are encapsulated in amorphous NiFe hydroxide nanosheets (a-NiFe@Ni-CW) via direct calcination and electroplating. The introduction of amorphous NiFe hydroxide nanosheets optimizes the electronic structure of a-NiFe@Ni-CW, accelerating electron transfer and reducing the energy barrier in the OER. More importantly, the Ni nanoparticles located on carbonized wood can function as magnetic heating centers under the effect of an alternating current (AC) magnetic field, further promoting the adsorption of reaction intermediates. Consequently, a-NiFe@Ni-CW demonstrated an overpotential of 268 mV at 100 mA cm^-2 for the OER under an AC magnetic field, which is superior to that of most reported transition metal catalysts. Starting with sustainable and abundant wood, this work provides a reference for highly effective and low-cost electrocatalyst design with the assistance of a magnetic field.

Recent Advances in Efficient Photocatalysis via Modulation of Electric and Magnetic Fields and Reactive Phase Control

The past several years has witnessed significant progress in enhancing photocatalytic performance via robust electric and magnetic fields' modulation to promote the separation and transfer of photoexcited carriers, and phase control at reactive interface to lower photocatalytic reaction energy barrier and facilitate mass transfer. These three research directions have received soaring attention in photocatalytic field. Herein, recent advances in photocatalysis modulated by electric field (i.e., piezoelectric, pyroelectric, and triboelectric fields, as well as their coupling) with specific examples and mechanisms discussion are first examined. Subsequently, the strategy via magnetic field manipulation for enhancing photocatalytic performance is scrutinized, including the spin polarization, Lorentz force, and magnetoresistance effect. Afterward, materials with tailored structure and composition design enabled by reactive phase control and their applications in photocatalytic hydrogen evolution and carbon dioxide reduction are reviewed. Finally, the challenges and potential opportunities to further boost photocatalytic efficiency are presented, aiming at providing crucial theoretical and experimental guidance for those working in photocatalysis, ferroelectrics, triboelectrics, piezo-/pyro-/tribo-phototronics, and electromagnetics, among other related areas.

Lamella-heterostructured nanoporous bimetallic iron-cobalt alloy/oxyhydroxide and cerium oxynitride electrodes as stable catalysts for oxygen evolution

Developing robust nonprecious-metal electrocatalysts with high activity towards sluggish oxygen-evolution reaction is paramount for large-scale hydrogen production via electrochemical water splitting. Here we report that self-supported laminate composite electrodes composed of alternating nanoporous bimetallic iron-cobalt alloy/oxyhydroxide and cerium oxynitride (FeCo/CeO_2-xN_x) heterolamellas hold great promise as highly efficient electrocatalysts for alkaline oxygen-evolution reaction. By virtue of three-dimensional nanoporous architecture to offer abundant and accessible electroactive CoFeOOH/CeO_2-xN_x heterostructure interfaces through facilitating electron transfer and mass transport, nanoporous FeCo/CeO_2-xN_x composite electrodes exhibit superior oxygen-evolution electrocatalysis in 1 M KOH, with ultralow Tafel slope of ~33 mV dec^-1. At overpotential of as low as 360 mV, they reach >3900 mA cm^-2 and retain exceptional stability at ~1900 mA cm^-2 for >1000 h, outperforming commercial RuO₂ and some representative oxygen-evolution-reaction catalysts recently reported. These electrochemical properties make them attractive candidates as oxygen-evolution-reaction electrocatalysts in electrolysis of water for large-scale hydrogen generation.

Rational Synthesis of Core-Shell-Structured Nickel Sulfide-Based Nanostructures for Efficient Seawater Electrolysis

Versatile electrocatalysis at higher current densities for natural seawater splitting to produce hydrogen demands active and robust catalysts to overcome the severe chloride corrosion, competing chlorine evolution, and catalyst poisoning. Hereto, the core-shell-structured heterostructures composed of amorphous NiFe hydroxide layer capped Ni₃ S₂ nanopyramids which are directly grown on nickel foam skeleton (NiS@LDH/NF) are rationally prepared to regulate cooperatively electronic structure and mass transport for boosting oxygen evolution reaction (OER) performance at larger current densities. The prepared NiS@LDH/NF delivers the anodic current density of 1000 mA cm^-2 at the overpotential of 341 mV in 1.0 m KOH seawater. The feasible surface reconstruction of Ni₃ S₂ -FeNi LDH interfaces improves the chemical stability and corrosion resistance, ensuring the robust electrocatalytic activity in seawater electrolytes for continuous and stable oxygen evolution without any hypochlorite production. Meanwhile, the designed Ni₃ S₂ nanopyramids coated with FeNi₂ P layer (NiS@FeNiP/NF) still exhibit the improved hydrogen evolution reaction (HER) activity in 1.0 m KOH seawater. Furthermore, the NiS@FeNiP/NF||NiS@LDH/NF pair requires cell voltage of 1.636 V to attain 100 mA cm^-2 with a 100% Faradaic efficiency, exhibiting tremendous potential for hydrogen production from seawater.

Dynamically Reversible Interconversion of Molecular Catalysts for Efficient Electrooxidation of Propylene into Propylene Glycol

For the electrooxidation of propylene into 1,2-propylene glycol (PG), the process involves two key steps of the generation of *OH and the transfer of *OH to the C═C bond in propylene. The strong *OH binding energy (E_B(*OH)) favors the dissociation of H₂O into *OH, whereas the transfer of *OH to propylene will be impeded. The scaling relationship of the E_B(*OH) plays a key role in affecting the catalytic performance toward propylene electrooxidation. Herein, we adopt an immobilized Ag pyrazole molecular catalyst (denoted as AgPz) as the electrocatalyst. The pyrrolic N-H in AgPz could undergo deprotonation to form pyrrolic N (denoted as AgPz-H_vac), which can be protonated reversibly. During propylene electrooxidation, the strong E_B(*OH) on AgPz favors the dissociation of H₂O into *OH. Subsequently, the AgPz transforms into AgPz-H_vac that possesses weak E_B(*OH), benefiting to the further combination of *OH and propylene. The dynamically reversible interconversion between AgPz and AgPz-H_vac accompanied by changeable E_B(*OH) breaks the scaling relationship, thus greatly lowering the reaction barrier. At 2.0 V versus Ag/AgCl electrode, AgPz achieves a remarkable yield rate of 288.9 mmol_PG g_cat^-1 h^-1, which is more than one order of magnitude higher than the highest value ever reported.

Oxygen Evolution/Reduction Reaction Catalysts: From In Situ Monitoring and Reaction Mechanisms to Rational Design

The oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) are core steps of various energy conversion and storage systems. However, their sluggish reaction kinetics, i.e., the demanding multielectron transfer processes, still render OER/ORR catalysts less efficient for practical applications. Moreover, the complexity of the catalyst-electrolyte interface makes a comprehensive understanding of the intrinsic OER/ORR mechanisms challenging. Fortunately, recent advances of in situ/operando characterization techniques have facilitated the kinetic monitoring of catalysts under reaction conditions. Here we provide selected highlights of recent in situ/operando mechanistic studies of OER/ORR catalysts with the main emphasis placed on heterogeneous systems (primarily discussing first-row transition metals which operate under basic conditions), followed by a brief outlook on molecular catalysts. Key sections in this review are focused on determination of the true active species, identification of the active sites, and monitoring of the reactive intermediates. For in-depth insights into the above factors, a short overview of the metrics for accurate characterizations of OER/ORR catalysts is provided. A combination of the obtained time-resolved reaction information and reliable activity data will then guide the rational design of new catalysts. Strategies such as optimizing the restructuring process as well as overcoming the adsorption-energy scaling relations will be discussed. Finally, pending current challenges and prospects toward the understanding and development of efficient heterogeneous catalysts and selected homogeneous catalysts are presented.

Defect engineering of two-dimensional materials for advanced energy conversion and storage

In the global trend towards carbon neutrality, sustainable energy conversion and storage technologies are of vital significance to tackle the energy crisis and climate change. However, traditional electrode materials gradually reach their property limits. Two-dimensional (2D) materials featuring large aspect ratios and tunable surface properties exhibit tremendous potential for improving the performance of energy conversion and storage devices. To rationally control the physical and chemical properties for specific applications, defect engineering of 2D materials has been investigated extensively, and is becoming a versatile strategy to promote the electrode reaction kinetics. Simultaneously, exploring the in-depth mechanisms underlying defect action in electrode reactions is crucial to provide profound insight into structure tailoring and property optimization. In this review, we highlight the cutting-edge advances in defect engineering in 2D materials as well as their considerable effects in energy-related applications. Moreover, the confronting challenges and promising directions are discussed for the development of advanced energy conversion and storage systems.

Reconstructured Electrocatalysts during Oxygen Evolution Reaction under Alkaline Electrolytes

The development of electrocatalysts with high-efficiency and clear structure-activity relationship towards the sluggish oxygen evolution reaction (OER) is essential for the wide application of water electrolyzers. Recently, the dynamic reconstruction phenomenon of the catalysts' surface structures during the OER process has been discovered. With the help of various advanced ex situ and in situ characterization, it is demonstrated that such surface reconstruction could yield actual active species to catalyze the water oxidation process. However, the attention and studies of potential interaction between reconstructed species and substrate are lacking. This review summarizes the recent development of typical reconstructed electrocatalysts and the substrate effect. First, the advanced characterization for electrocatalytic reconstruction is briefly discussed. Then, typical reconstructed electrocatalysts are comprehensively summarized and the key role of substrate effects during the OER process is emphasized. Finally, the future challenges and perspectives of surface reconstructed catalysts for water electrolysis are discussed.

A Pseudocapacitor Diode Based on Ion-Selective Surface Redox Effect

Supercapacitor diode (CAPode) is a novel device that integrates ion diode functionality into a conventional electrical double-layer capacitor and is expected to have great applications in emerging fields such as signal propagation, microcircuit rectification, logic operations, and neuromorphology. Here, a brand new pseudocapacitor diode is reported that has both high charge storage (50.2 C g^-1 at 20 mV s^-1 ) and high rectification (the rectification ratio of 0.79 at 200 mV s^-1 ) properties, which is realized by the ion-selective surface redox reaction of spinel ZnCo₂ O₄ in aqueous alkaline electrolyte. Furthermore, an application of the integrated device is demonstrated in the logic gate of circuit system to realize the logic operations of "AND" and "OR". This work not only expands the types of CAPodes, but also provides a train of thought for constructing high-performance capacitive ionic diodes.

Selectively Enhanced Electrocatalytic Oxygen Evolution within Nanoscopic Channels Fitting a Specific Reaction Intermediate for Seawater Splitting

Abundant availability of seawater grants economic and resource-rich benefits to water electrolysis technology requiring high-purity water if undesired reactions such as chlorine evolution reaction (CER) competitive to oxygen evolution reaction (OER) are suppressed. Inspired by a conceptual computational work suggesting that OER is kinetically improved via a double activation within 7 Å-gap nanochannels, RuO₂ catalysts are realized to have nanoscopic channels at 7, 11, and 14 Å gap in average (d_gap ), and preferential activity improvement of OER over CER in seawater by using nanochanneled RuO₂ is demonstrated. When the channels are developed to have 7 Å gap, the OER current is maximized with the overpotential required for triggering OER minimized. The gap value guaranteeing the highest OER activity is identical to the value expected from the computational work. The improved OER activity significantly increases the selectivity of OER over CER in seawater since the double activation by the 7 Å-nanoconfined environments to allow an OER intermediate (*OOH) to be doubly anchored to Ru and O active sites does not work on the CER intermediate (*Cl). Successful operation of direct seawater electrolysis with improved hydrogen production is demonstrated by employing the 7 Å-nanochanneled RuO₂ as the OER electrocatalyst.

Facet Engineering of Advanced Electrocatalysts Toward Hydrogen/Oxygen Evolution Reactions

The crystal facets featured with facet-dependent physical and chemical properties can exhibit varied electrocatalytic activity toward hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) attributed to their anisotropy. The highly active exposed crystal facets enable increased mass activity of active sites, lower reaction energy barriers, and enhanced catalytic reaction rates for HER and OER. The formation mechanism and control strategy of the crystal facet, significant contributions as well as challenges and perspectives of facet-engineered catalysts for HER and OER are provided.

The electrocatalytic water splitting technology can generate high-purity hydrogen without emitting carbon dioxide, which is in favor of relieving environmental pollution and energy crisis and achieving carbon neutrality. Electrocatalysts can effectively reduce the reaction energy barrier and increase the reaction efficiency. Facet engineering is considered as a promising strategy in controlling the ratio of desired crystal planes on the surface. Owing to the anisotropy, crystal planes with different orientations usually feature facet-dependent physical and chemical properties, leading to differences in the adsorption energies of oxygen or hydrogen intermediates, and thus exhibit varied electrocatalytic activity toward hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). In this review, a brief introduction of the basic concepts, fundamental understanding of the reaction mechanisms as well as key evaluating parameters for both HER and OER are provided. The formation mechanisms of the crystal facets are comprehensively overviewed aiming to give scientific theory guides to realize dominant crystal planes. Subsequently, three strategies of selective capping agent, selective etching agent, and coordination modulation to tune crystal planes are comprehensively summarized. Then, we present an overview of significant contributions of facet-engineered catalysts toward HER, OER, and overall water splitting. In particular, we highlight that density functional theory calculations play an indispensable role in unveiling the structure–activity correlation between the crystal plane and catalytic activity. Finally, the remaining challenges in facet-engineered catalysts for HER and OER are provided and future prospects for designing advanced facet-engineered electrocatalysts are discussed.

Integrating Electrochemical CO2 Reduction on α-NiS with the Water or Organic Oxidations by Its Electro-Oxidized NiO(OH) Counterpart to an Artificial Photosynthetic Scheme

Efficient hydrogen production, biomass up-conversion, and CO₂-to-fuel generation are the key challenges of the present decade. Electrocatalysis in aqueous electrolytes by choosing suitable transition-metal-based electrode materials remains the green approach for the trio of sustainable developments. Given that, finding electrode materials with multifunctional capability would be beneficial. Herein, the nanocrystalline α-NiS, synthesized solvothermally, has been chosen as an electrode material. As the first step to construct an electrolyzer, α-NiS deposited on conducting nickel foam (NF) has been used as an anode, and under the anodic potential, the α-NiS particles have lost sulfides to the electrolyte and transform to amorphous electro-derived NiO(OH) (NiO(OH)_ED), confirmed by different spectroscopic and microscopic studies. In situ transformation of α-NiS to amorphous NiO(OH)_ED results in an enhancement of the electrochemical surface area and not only becomes active toward oxygen evolution reaction (OER) at a moderate overpotential of 264 mV (at 20 mA cm^-2) but also can convert a series of biomass-derived organic compounds, namely, 2-hydroxymethylfurfural (HMF), 2-furfural (FF), ethylene glycol (EG), and glycerol (Gly), to industrially relevant feedstocks with a high (∼96%) Faradaic efficiency. During these organic oxidations, NiO(OH)_ED/NF participate in the multiple-electron oxidation process (up to 8e^-) including C-C bond cleavages of EG and Gly. During the cathodic performance of the α-NiS/NF, the structural integrity has been retained and the unaltered α-NiS/NF electrode remains more effective cathode for alkaline hydrogen evolution reaction (HER) and CO₂ reduction (CO₂R) compared to its in situ-derived NiO(OH)_ED/NF. α-NiS/NF can reduce the CO₂ predominantly to CO even at a higher potential like -0.8 V (vs RHE). The fabricated cell with α-NiS and its electro-oxidized NiO(OH)_ED counterpart, α-NiS/NF(-)/(+)NiO(OH)_ED/NF, is able to show an artificial photosynthetic scheme in which the NiO(OH)_ED/NF anode oxidizes water to O₂ and the α-NiS cathode reduces CO₂ majorly to CO in a moderate cell potential. In this study, α-NiS has been utilized as a single electrode material to perform multiple sustainable transformations.

Self-standing 2D/2D Co3O4@FeOOH nanosheet arrays as promising catalysts for the oxygen evolution reaction

The rational design of a highly efficient oxygen evolution reaction (OER) is crucial for the practical applications of water electrolysis. Herein, a hybrid Co₃O₄@FeOOH/NF electrode was fabricated by loading FeOOH sheets on the surface of Co₃O₄ nanosheet arrays via a newly developed chemical deposition protocol. The decoration of FeOOH on Co₃O₄ nanosheet arrays not only endows a strong electronic interaction between the two components but also offers sufficient active sites for the OER process. Benefitting from these advantages, Co₃O₄@FeOOH/NF exhibited outstanding OER activity in terms of a low overpotential of 209 mV at 10 mA cm^-2 and a low Tafel slope of 48.9 mV dec^-1. Moreover, nearly steady state operation current and negligible change in the phase and morphology of the catalyst also indicate remarkable stability. This work may provide an important guide for the design of high-performance electrocatalysts for energy conversion applications.

Volcano relationships and a new activity descriptor of 2D transition metal-Fe layered double hydroxides for efficient oxygen evolution reaction

Iron (Fe) sites play a critical role in boosting the catalytic activity of transition metal layered double hydroxide (LDH) electrocatalysts for the oxygen evolution reaction (OER), but the contribution of the Fe content to the catalysis of Fe-doped LDHs is still not well understood. Herein, a series of two-dimensional (2D) Fe-doped MFe-LDHs (M = Co, Ni, Cu, and Mn) was synthesized via a general molecular self-assembly method to track the role of Fe in their electrocatalytic OER activities. Besides the revelation of the intrinsic activity trend of NiFe > CoFe > MnFe > CuFe, volcano-shaped relationships among the catalytic activity descriptors, i.e., overpotential, Tafel slope, and turnover frequency (TOF), and the Fe-content in MFe-LDHs, were identified. Specifically, a ∼20% Fe content resulted in the highest OER performance for the LDH, while excess Fe compromised its activity. A similar volcano relationship was determined between the intermediate adsorption and Fe content via operando impedance spectroscopy (EIS) measurements, and it was shown that the intermediate adsorption capacitance (CPE_ad) can be a new activity descriptor for electrocatalysts. In this work, we not only performed a systematic study on the role of Fe in 2D Fe-doped LDHs but also offer some new insights into the activity descriptors for electrocatalysts.

Recent Advances of Modified Ni (Co, Fe)-Based LDH 2D Materials for Water Splitting

Water splitting technology is an efficient approach to produce hydrogen (H₂) as an energy carrier, which can address the problems of environmental deterioration and energy shortage well, as well as establishment of a clean and sustainable hydrogen economy powered by renewable energy sources due to the green reaction of H₂ with O₂. The efficiency of H₂ production by water splitting technology is intimately related with the reactions on the electrode. Nowadays, the efficient electrocatalysts in water splitting reactions are the precious metal-based materials, i.e., Pt/C, RuO₂, and IrO₂. Ni (Co, Fe)-based layered double hydroxides (LDH) two-dimensional (2D) materials are the typical non-precious metal-based materials in water splitting with their advantages including low cost, excellent electrocatalytic performance, and simple preparation methods. They exhibit great potential for the substitution of precious metal-based materials. This review summarizes the recent progress of Ni (Co, Fe)-based LDH 2D materials for water splitting, and mainly focuses on discussing and analyzing the different strategies for modifying LDH materials towards high electrocatalytic performance. We also discuss recent achievements, including their electronic structure, electrocatalytic performance, catalytic center, preparation process, and catalytic mechanism. Furthermore, the characterization progress in revealing the electronic structure and catalytic mechanism of LDH is highlighted in this review. Finally, we put forward some future perspectives relating to design and explore advanced LDH catalysts in water splitting.

Improving the Oxygen Evolution Activity of Layered Double-Hydroxide via Erbium-Induced Electronic Engineering

Layered double-hydroxide (LDH) has been considered an important class of electrocatalysts for the oxygen evolution reaction (OER), but the adsorption-desorption behaviors of oxygen intermediates on its surface still remain unsatisfactory. Apart from transition-metal doping to solve this electrocatalytic problem of LDH, rare-earth (RE) species have sprung up as emerging dopants owing to their unique 4f valence-electronic configurations. Herein, the Er is chosen as a RE model to improve OER activity of LDH via constructing nickel foam supported Er-doped NiFe-LDH catalyst (Er-NiFe-LDH@NF). The optimal Er-NiFe-LDH@NF exhibits a low overpotential (191 mV at 10 mA cm^-2 ), high turnover frequency (0.588 s^-1 ), and low activation energy (36.03 kJ mol^-1 ), which are superior to Er-free sample. Electrochemical in situ Raman spectra reveal the facilitated transition of Ni-OH into Ni-OOH for promoted OER kinetics through the Er doping effect. Theoretical calculations demonstrate that the introduction of Er facilitates the spin crossover of valence electrons by optimizing the d band center of NiFe-LDH, which leads to the G_O -G_HO closer to the optimal activity of the kinetic OER volcano by balancing the bonding strength of *O and *OH. Moreover, the Er-NiFe-LDH@NF presents high practicability in electrochemical water-splitting devices with a low driving potential of and a well-extended driving period.

Ionic γ-FeO(OH) Nanocrystal Stabilized by Small Isopolymolybdate Clusters as Reactive Core for Water Oxidation

At near neutral to basic pH, hydrolysis-induced aggregation to insoluble bulk iron-oxide is often regarded as the pitfalls of molecular iron clusters. Iron-oxide nanocrystals are encouragingly active over the molecular clusters and/or bulk oxides albeit, stabilizing such nanostructures in aqueous pH and under turnover condition remain a perdurable challenge. Herein, an Anderson-type [Mo₇ O₂₄ ]^6- isopolyanion, a small (dimension ca. 0.85 nm) isolable polyoxometalate (POM) possessing only {31} atoms, has been introduced for the first time as a covalent linker to stabilize an infinitely stable and aqueous-soluble γ-FeO(OH) nanocore. During the hydrothermal isolation of the material, a partial dissociation of the parent [Mo₇ O₂₄ ]^6- may lead to the in situ generation of few analogous [Mo_x O_y ]^n- clusters, proved by Raman study, which can also participate in stabilizing the γ-FeO(OH) nanocore, Mo_x O_y @FeO(OH). However, due to high ionic charge on {Mo=O} terminals of the [Mo_x O_y ]^n- , they are covalently linked via Mo^VI -μ₂ O-Fe^III bridging to γ-FeO(OH) core in Mo_x O_y @FeO(OH), established by numerous spectroscopic and microscopic evidence. Such bonding mode is more likely as precedent from the coordination motif documented in the transition metal clusters stabilized by this POM. The γ-FeO(OH) nanocore of Mo_x O_y @FeO(OH) behaves as potent active center for electrochemical water oxidation with a overpotential, 263 mV @ 10 mA cm^-2 , lower than that observed for bare γ-FeO(OH). Despite of some molybdenum dissolution from the POM ligands to the electrolyte, residual anionic POM fragments covalently bound to the OER active γ-FeO(OH) core of the Mo_x O_y @FeO(OH) makes the surface predominantly ionic that results in an ordered electrical double layer to promote a better charge transport across the electrode-electrolyte junction, less likely in bulk γ-FeO(OH).

Bottom-up evolution of perovskite clusters into high-activity rhodium nanoparticles toward alkaline hydrogen evolution

Self-reconstruction has been considered an efficient means to prepare efficient electrocatalysts in various energy transformation process for bond activation and breaking. However, developing nano-sized electrocatalysts through complete in-situ reconstruction with improved activity remains challenging. Herein, we report a bottom-up evolution route of electrochemically reducing Cs₃Rh₂I₉ halide-perovskite clusters on N-doped carbon to prepare ultrafine Rh nanoparticles (~2.2 nm) with large lattice spacings and grain boundaries. Various in-situ and ex-situ characterizations including electrochemical quartz crystal microbalance experiments elucidate the Cs and I extraction and Rh reduction during the electrochemical reduction. These Rh nanoparticles from Cs₃Rh₂I₉ clusters show significantly enhanced mass and area activity toward hydrogen evolution reaction in both alkaline and chlor-alkali electrolyte, superior to liquid-reduced Rh nanoparticles as well as bulk Cs₃Rh₂I₉-derived Rh via top-down electro-reduction transformation. Theoretical calculations demonstrate water activation could be boosted on Cs₃Rh₂I₉ clusters-derived Rh nanoparticles enriched with multiply sites, thus smoothing alkaline hydrogen evolution.

Sulfate-Decorated Amorphous-Crystalline Cobalt-Iron Oxide Nanosheets to Enhance O-O Coupling in the Oxygen Evolution Reaction

The electrochemical oxygen evolution reaction (OER) plays a fundamental role in several energy technologies, which performance and cost-effectiveness are in large part related to the used OER electrocatalyst. Herein, we detail the synthesis of cobalt-iron oxide nanosheets containing controlled amounts of well-anchored SO₄^2- anionic groups (CoFe_xO_y-SO₄). We use a cobalt-based zeolitic imidazolate framework (ZIF-67) as the structural template and a cobalt source and Mohr's salt ((NH₄)₂Fe(SO₄)₂·6H₂O) as the source of iron and sulfate. When combining the ZIF-67 with ammonium iron sulfate, the protons produced by the ammonium ion hydrolysis (NH₄⁺ + H₂O = NH₃·H₂O + H⁺) etch the ZIF-67, dissociating its polyhedron structure, and form porous assemblies of two-dimensional nanostructures through a diffusion-controlled process. At the same time, iron ions partially replace cobalt within the structure, and SO₄^2- ions are anchored on the material surface by exchange with organic ligands. As a result, ultrathin CoFe_xO_y-SO₄ nanosheets are obtained. The proposed synthetic procedure enables controlling the amount of Fe and SO₄ ions and analyzing the effect of each element on the electrocatalytic activity. The optimized CoFe_xO_y-SO₄ material displays outstanding OER activity with a 10 mA cm^-2 overpotential of 268 mV, a Tafel slope of 46.5 mV dec^-1, and excellent stability during 62 h. This excellent performance is correlated to the material's structural and chemical parameters. The assembled nanosheet structure is characterized by a large electrochemically active surface area, a high density of reaction sites, and fast electron transportation. Meanwhile, the introduction of iron increases the electrical conductivity of the catalysts and provides fast reaction sites with optimum bond energy and spin state for the adsorption of OER intermediates. The presence of sulfate ions at the catalyst surface modifies the electronic energy level of active sites, regulates the adsorption of intermediates to reduce the OER overpotential, and promotes the surface charge transfer, which accelerates the formation of oxygenated intermediates. Overall, the present work details the synthesis of a high-efficiency OER electrocatalyst and demonstrates the introduction of nonmetallic anionic groups as an excellent strategy to promote electrocatalytic activity in energy conversion technologies.