Antibacterial activities of zinc oxide nanoparticles against Escherichia coli O157:H7

Classification and research progress of implant surface antimicrobial techniques

Due to the good biocompatibility and ideal mechanical property, titanium implants have been widely used in dental clinic and orthopedic surgery. However, bacteria induced infection can cause per-implant inflammation and decrease the success rate of implant surgery. Therefore, developing antimicrobial techniques is essential to successful application of titanium implants. Many surface antimicrobial techniques, including antimicrobial coating and surface modifications, have been explored and they always exert antimicrobial effect by reducing bacterial adhesion, inhibiting their metabolism, or destructing cell structure. In this paper, different surface antimicrobial techniques and their recent research progress are reviewed to provide a brief insight on this area.

Toxicities of the copper and zinc oxide nanoparticles on Marshallagia marshalli (Nematoda: Trichostrongylidae): evidence on oxidative/nitrosative stress biomarkers, DNA damage and egg hatchability

This study investigated the in vitro anthelmintic activity of copper oxide (CuO) and zinc oxide (ZnO) nanoparticles (NPs) against Marshallagia marshalli. The in vitro study was based on an egg hatch assay, adult and larvae motility inhibition assays, DNA damage, intensity protein profile along with several oxidative/nitrosative stress biomarkers including superoxide dismutase (SOD), catalase (CAT), glutathione peroxidase (GSH-Px), protein carbonylation (PCO), malondialdehyde (MDA), total antioxidant status (TAS) and nitric oxide (NO) content. Different concentrations of CuO-NPs and ZnO-NPs (1, 4, 8, 12 and 16 ppm) were used to assess anthelmintic effects on three stages of M. marshalli life cycle - that is, eggs, larvae and adult parasites for 24 h. The results indicated that CuO-NPs and ZnO-NPs played a significant role as anthelminthics, and the effect was dependent on time and concentration. The concentrations of 12 and 16 ppm of CuO-NPs and 16 ppm of ZnO-NPs resulted in the induction of oxidative/nitrosative stress (decreased SOD, GSH-Px and CAT, and increased MDA, PCO and NO), increased DNA damage, inhibition of adult and larval motility, egg hatch and low intensity of protein bands following sodium dodecyl sulphate-polyacrylamide gel electrophoresis, compared to control. It was concluded that CuO-NPs and ZnO-NPs could be utilized as novel and potential agents for the control and treatment of M. marshalli infection, and they have the pharmacological potential to be studied in vivo for further utilization in treating parasitic infections.

Targeted and Enhanced Antimicrobial Inhibition of Mesoporous ZnO-Ag2O/Ag, ZnO-CuO, and ZnO-SnO2 Composite Nanoparticles

In this work, mesoporous (pore size below 4 nm) composite nanoparticles of ZnO-Ag₂O/Ag, ZnO-CuO, and ZnO-SnO₂ of size d ≤ 10 nm (dia.) have been synthesized through the in situ solvochemical reduction method using NaBH₄. These composite nanoparticles exhibited excellent killing efficacy against Gram-positive/negative bacterial and fungal strains even at a very low dose of 0.010 μg/mL. Additionally, by applying the in silico docking approach, the nanoparticles and microorganism-specific targeted proteins and their interactions have been identified to explain the best anti-bacterial/anti-fungal activities of these composites. For this purpose, the virulence and resistance causing target proteins such as PqsR, RstA, FosA, and Hsp90 of Pseudomonas aeruginosa, Acinetobacter baumannii, Klebsiella pneumoniae, and Candida albicans have been identified to find out the best inhibitory action mechanisms involved. From the in vitro study, it is revealed that all the composite nanoparticle types used here can act as potent antimicrobial components. All the composite nanoparticles have exhibited excellent inhibition against the microorganisms compared to their constituent single metal or metal oxide nanoparticles. Among the nanoparticle types, the ZnO-Ag₂O/Ag composite nanoparticles exhibited the best inhibition activity compared to the other reported nanoparticles. The microorganisms which are associated with severe infections lead to the multidrug resistance and have become a huge concern in the healthcare sector. Conventional organic antibiotics are less stable at a higher temperature. Therefore, based on the current demands, this work has been focused on designing inorganic antibiotics which possess stability even under harsh conditions. In this direction, our developed composite nanoparticles were explored for potential uses in the healthcare technology, and they may solve many problems in global emergency and epidemics caused by the microorganisms.

Nanotechnology as a Novel Approach in Combating Microbes Providing an Alternative to Antibiotics

The emergence of infectious diseases promises to be one of the leading mortality factors in the healthcare sector. Although several drugs are available on the market, newly found microorganisms carrying multidrug resistance (MDR) against which existing drugs cannot function effectively, giving rise to escalated antibiotic dosage therapies and the need to develop novel drugs, which require time, money, and manpower. Thus, the exploitation of antimicrobials has led to the production of MDR bacteria, and their prevalence and growth are a major concern. Novel approaches to prevent antimicrobial drug resistance are in practice. Nanotechnology-based innovation provides physicians and patients the opportunity to overcome the crisis of drug resistance. Nanoparticles have promising potential in the healthcare sector. Recently, nanoparticles have been designed to address pathogenic microorganisms. A multitude of processes that can vary with various traits, including size, morphology, electrical charge, and surface coatings, allow researchers to develop novel composite antimicrobial substances for use in different applications performing antimicrobial activities. The antimicrobial activity of inorganic and carbon-based nanoparticles can be applied to various research, medical, and industrial uses in the future and offer a solution to the crisis of antimicrobial resistance to traditional approaches. Metal-based nanoparticles have also been extensively studied for many biomedical applications. In addition to reduced size and selectivity for bacteria, metal-based nanoparticles have proven effective against pathogens listed as a priority, according to the World Health Organization (WHO). Moreover, antimicrobial studies of nanoparticles were carried out not only in vitro but in vivo as well in order to investigate their efficacy. In addition, nanomaterials provide numerous opportunities for infection prevention, diagnosis, treatment, and biofilm control. This study emphasizes the antimicrobial effects of nanoparticles and contrasts nanoparticles' with antibiotics' role in the fight against pathogenic microorganisms. Future prospects revolve around developing new strategies and products to prevent, control, and treat microbial infections in humans and other animals, including viral infections seen in the current pandemic scenarios.

Zinc Polyaleuritate Ionomer Coatings as a Sustainable, Alternative Technology for Bisphenol A-Free Metal Packaging

Sustainable coatings for metal food packaging were prepared from ZnO nanoparticles (obtained by the thermal decomposition of zinc acetate) and a naturally occurring polyhydroxylated fatty acid named aleuritic (or 9,10,16-trihydroxyhexadecanoic) acid. Both components reacted, originating under specific conditions zinc polyaleuritate ionomers. The polymerization of aleuritic acid into polyaleuritate by a solvent-free, melt polycondensation reaction was investigated at different times (15, 30, 45, and 60 min), temperatures (140, 160, 180, and 200 °C), and proportions of zinc oxide and aleuritic acid (0:100, 5:95, 10:90, and 50:50, w/w). Kinetic rate constants calculated by infrared spectroscopy decreased with the amount of Zn due to the consumption of reactive carboxyl groups, while the activation energy of the polymerization decreased as a consequence of the catalyst effect of the metal. The adhesion and hardness of coatings were determined from scratch tests, obtaining values similar to robust polymers with high adherence. Water contact angles were typical of hydrophobic materials with values ≥94°. Both mechanical properties and wettability were better than those of bisphenol A (BPA)-based resins and most likely are related to the low migration values determined using a hydrophilic food simulant. The presence of zinc provided a certain degree of antibacterial properties. The performance of the coatings against corrosion was studied by electrochemical impedance spectroscopy at different immersion times in an aqueous solution of NaCl. Considering the features of these biobased lacquers, they can be potential materials for bisphenol A-free metal packaging.

A Novel Biodegradable Composite Polymer Material Based on PLGA and Silver Oxide Nanoparticles with Unique Physicochemical Properties and Biocompatibility with Mammalian Cells

A method for obtaining a stable colloidal solution of silver oxide nanoparticles has been developed using laser ablation. The method allows one to obtain nanoparticles with a monomodal size distribution and a concentration of more than 108 nanoparticles per mL. On the basis of the obtained nanoparticles and the PLGA polymer, a nanocomposite material was manufactured. The manufacturing technology allows one to obtain a nanocomposite material without significant defects. Nanoparticles are not evenly distributed in the material and form domains in the composite. Reactive oxygen species (hydrogen peroxide and hydroxyl radical) are intensively generated on the surfaces of the nanocomposite. Additionally, on the surface of the composite material, an intensive formation of protein long-lived active forms is observed. The ELISA method was used to demonstrate the generation of 8-oxoguanine in DNA on the developed nanocomposite material. It was found that the multiplication of microorganisms on the developed nanocomposite material is significantly decreased. At the same time, the nanocomposite does not inhibit proliferation of mammalian cells. The developed nanocomposite material can be used as an affordable and non-toxic nanomaterial to create bacteriostatic coatings that are safe for humans.

Antibacterial and Antifungal Properties of Electrospun Recycled PET Polymeric Fibers Functionalized with Zinc Oxide Nanoparticles

Currently, to reduce the environmental problems associated with plastic waste, methods are being sought to use this waste as raw materials in different applications, such as fibers. In addition, to improve these materials and provide different properties, nanoparticles (NPs) are incorporated. In the present work, polymeric fibers made of recycled polyethylene terephthalate (r-PET) from post-consumer water bottles, functionalized with 0%, 1.5%, 3% and 6% zinc oxide nanoparticles (ZnO-NPs) in function of r-PET weight, were elaborated to evaluate their antibacterial and antifungal characteristics. The ZnO-NPs were synthesized by the solvothermal method, obtaining particles with a mean diameter of 38.15 nm, while the fibers were obtained by electrospinning with a diameter range between 200-5000 nm. The functionalized fibers were carried out against Escherichia coli and Bacillus subtilis through the agar diffusion method, obtaining the highest inhibition halo at 6% w/w ZnO-NPs, being 26.5 mm and 34.25 mm, respectively. In addition, the same method was used to evaluate the antifungal activity of Penicillium s.p. and Fusarium graminearum, observing antifungal properties due to the presence of nanoparticles in the fibers.

Effect of Polyethylene Film Thickness on the Antimicrobial Activity of Embedded Zinc Oxide Nanoparticles

Microbial contamination of most foods occurs primarily at the surface during postprocessing and handling; therefore, preventing cross-contamination by incorporation of antimicrobial substances in contact with the surface of the product is an efficient strategy in reducing food contamination risks. Zinc oxide nanoparticles (ZnONPs) have been used widely to achieve antimicrobial films in various applications including the food industry. This work describes the fabrication of antimicrobial polymeric films containing ZnONPs produced by the coextrusion and dip-coating techniques. Effects of skin layer thicknesses containing ZnONPs on the antimicrobial effectiveness of the film by their capability to inactivate Gram-positive and Gram-negative bacteria were studied for both methods. The antimicrobial properties of the coextruded multilayer LLDPE/ZnONP nanocomposite films evidenced antimicrobial activity in the range 0.5-1.5 log reductions, while in the case of a sandblasted multilayer film, it showed high antimicrobial properties as around 99.99%. The optical properties of coextruded multilayer films were measured and discussed. Furthermore, to achieve a thinner LLDPE thickness, ZnONPs were coated with different concentrations of LLDPE solution by the dip-coating method. TEM confirmed that a homogeneous layer is formed on the surface of ZnONPs. The thickness of the LLDPE layer estimated by TEM was about 2 nm and film produced 3 log and 4 log reductions for E. coli and S. aureus, respectively. The results show that developed films have the potential to be used as food packaging films and can extend shelf life, maintain quality, and assure the safety of food. The antimicrobial mechanisms of ZnONPs were also investigated. It was found that direct contact of particles with products is necessary to assure high antibacterial activity of the films.

Conductometric Immunosensor for Escherichia coli O157:H7 Detection Based on Polyaniline/Zinc Oxide (PANI/ZnO) Nanocomposite

A conductometric immunosensor was developed for the detection of one of the most common foodborne pathogens, Escherichia coli O157:H7 (E. coli O157:H7), by conductometric sensing. The sensor was built based on a polyaniline/zinc oxide (PANI/ZnO) nanocomposite film spin-coated on a gold electrode. Then, it was modified with a monoclonal anti-E. coli O157:H7 antibody as a biorecognition element. The fabricated nanostructured sensor was able to quantify the pathogens under optimal detection conditions, within 30 min, and showed a good detection range from 10¹ to 10⁴ CFU/mL for E. coli O157:H7 and a minimum detection limit of 4.8 CFU/mL in 0.1% peptone water. The sensor efficiency for detecting bacteria in food matrices was tested in ultra-heat-treated (UHT) skim milk. E. coli O157:H7 was detected at concentrations of 10¹ to 10⁴ CFU/mL with a minimum detection limit of 13.9 CFU/mL. The novel sensor was simple, fast, highly sensitive with excellent specificity, and it had the potential for rapid sample processing. Moreover, this unique technique for bacterial detection could be applicable for food safety and quality control in the food sector as it offers highly reliable results and is able to quantify the target bacterium.

Synthesis and Antibacterial Activity of Metal-Containing Ultraviolet-Cured Wood Floor Coatings

In our previous report, the antibacterial agents with different metals, mono(hydroxyethoxyethyl)phthalate [M(HEEP)₂, M = Zn, Mn, and Ca], were synthesized. For increasing their yields, modified synthesis and purified processes were further investigated. The result of energy-dispersive X-ray spectroscopy showed the M(HEEP)₂ could be stable and successfully synthesized, and their yields were raised to 73–85% from our previous report of 43–55%. For ultraviolet-cured wood floor coating application, the Zn(HEEP)₂ was selected as an antibacterial agent and mixed with commercial UV wood floor coating. The effects on the antibacterial activity of UV films with different Zn(HEEP)₂ additions of 0, 4, 8, and 12 phr as well as the commercial nano-Ag of 12 phr against Escherichia coli were evaluated. In the static antibacterial test, the UV films with Zn(HEEP)₂ additions had similar antibacterial activity of 57–59%. In another dynamic shaking antibacterial test, the film containing 12 phr Zn(HEEP)₂ had the best antibacterial activity among all the UV films. On the film properties, the Zn(HEEP)₂-containing UV films had lower gloss and abrasion resistance, and slightly increased the hardness than those of UV film without Zn(HEEP)₂ addition. However, there were no noticeable differences in mass retention, lightfastness, and thermal stability between UV films with and without the Zn(HEEP)₂ addition. In this study, the 12 phr Zn(HEEP)₂-containing UV film provided the best antibacterial activity against E. coli and had the balanced film properties for application on the UV wood floor coating.

Electrochemical process for simultaneous removal of chemical and biological contaminants from drinking water

Simultaneous management of chemical and biological contaminants in drinking water has been presented through modification in conventional electrocoagulation (EC) process. Traditional EC process using iron and aluminum electrodes removed metals but did not affect microbiological contaminants to a greater extent. Iron anode composition was amended by addition of zinc for desired antimicrobial output. To evaluate the efficiency of this system, samples were spiked with multiple element standard and microbial cultures to human unsafe contamination level. Modified EC process removed both types of contaminants making water safe for human consumption within the prescribed regulatory guidelines set by WHO/NSDWQ within 4 min. This setup removed chemical contaminants up to 100% including nitrates, fluoride, arsenic, beryllium, chromium, copper, mercury, vanadium, zinc, nickel, phosphorus, and lead. A substantial removal in cadmium (89.8%), cobalt (75.7%), and selenium (46.7%) was computed. The treatment could not prove good results for removal of boron, barium, lithium, and strontium from the spiked sample. The compositional analysis of flocs screened after spiked sample treatment confirmed the physical adsorption of metals at floc surface. Treatment technique comprehensively proved equally efficient for disinfection of most common microbiological contaminations including E. Coli, fecal coliforms, total coliforms, total plate count, Staphylococcus auseous, and Pseudomonas aeruginosa within 5 min. In EC process 220V voltage was applied through rectifier at electrodes having 15.6 cm² surface area and 15 mm apart in 1-L water sample batches, where current varied from 0.8 to 1.6 ampere. The outcomes of the current experiment are of novel significance regarding simultaneous removal of metals and microbiological contaminants from drinking water which is not reported in previous treatment studies.

A state of the art review on the synthesis, antibacterial, antioxidant, antidiabetic and tissue regeneration activities of zinc oxide nanoparticles

Recently, zinc oxide nanoparticles (ZnONPs) are gaining much interest of nanobiotechnologists due to their profound biomedical applications. ZnONPs are used as antibacterial agents, which cause both gram-positive and negative bacterial cell death through the generation of reactive free radicals as well as membrane rupture. ZnONPs show excellent antioxidant properties in normal mammalian cells via the scavenging of reactive free radicals and up-regulation of antioxidant enzyme activities. Besides, it also shows hypoglycaemic effect in diabetic animals via pancreatic β-cells mediated increased insulin secretion and glucose uptake by liver, skeletal muscles and adipose tissues. Among the other potential applications, ZnONPs-induced bone and soft-tissue regeneration open a new horizon in the field of tissue engineering. Here, first we reviewed the complete synthesis routes of ZnONPs by physical, chemical, and biological pathways as well as outlined the advantages and disadvantages of the techniques. Further, we discussed the several important aspects of physicochemical analysis of ZnONPs. Additionally, we extensively reviewed the important biomedical applications of ZnONPs as antibacterial, antioxidant, and antidiabetic agents, and in the field of tissue engineering with special emphasis on their mechanisms of actions. Furthermore, the future perspectives of the ZnONPs are also discussed.

Preparation of Zinc Oxide Nanoparticles using Aspergillus niger as Antimicrobial and Anticancer Agents

In the current study, zinc oxide nanoparticles (ZnO-NP) were prepared using extracellular extracts of Aspergillus niger. Hence, the morphological structure, optical, and surface features of the synthesized nanoparticles were studied by X-ray diffraction, transmission electron microscopy, ultraviolet-visible and infrared absorption by Fourier transform. Use dynamic light scattering and zeta potential measurements to assess colloidal stability. The mean size of the synthetic particles is approximately 20 ± 5 nm and they have a hexagonal crystal structure. In addition, the prepared nanoparticles have strong light absorption in the ultraviolet region of λ = 265 and 370 nm. To achieve the goal of this study, the efficiency of ZnO-NP was determined as an antibacterial and antifungal against different bacterial and fungal strains. It was found that ZnO-NP showed significant antibacterial activity, where the inhibition zones were varied from 21 to 35mm in diameter against six bacterial species (i.e. K. pneumoniae, E. coli, A. baumannii, P. aeruginosa, S. aureus, and S. haemolyticus). In such a case, the minimal inhibitory concentration of zinc oxide nanoparticles against bacterial strains were 50, 12.5, 12.5, 50, 12.5, and 12.5μg/ml for K. pneumoniae, E. coli, A. baumannii, P. aeruginosa, S. aureus, and S. haemolyticus, respectively. Furthermore, ZnO-NP exhibits an antifungal behaviour against four fungal species (i.e., A. niger, P. marneffei, C. glabrata, and C. parapsilosis) with inhibition zone from 18 to 35mm in diameter. Whereas, the MICs for fungal isolates were 12.5μg/ml except A. niger was at 25μg/ml. Wi-38 cells were treated with ZnO-NPs exhibited different levels of cytotoxicity dependent upon the concentration of ZnO NPs using the MTT assay with IC50~800.42. Therefore, the present study introduces a facile and cost-effective extracellular green-synthesis of ZnO-NP to be used as antimicrobial and anticancer agents.

Bringing resistance modulation to epidemic methicillin resistant S. aureus of dairy through antibiotics coupled metallic oxide nanoparticles

The current study probed methicillin resistant S. aureus from milk of different dairy farms along with its response to multiple antibiotics, assessment of risk factors, and response to antibiotic coupled nanoparticle. XRD of Np was confirmed as miller indices (hkl) values i.e. (101), (100), (002), (110), (012) and (013) while STEM finally revealed 40-60 nm nanorods in aggregated form. Total of 6 preparations viz a viz gentamicin (G), chloramphenicol (C), zinc oxide nanoparticle (Np), gentamicin coupled Np (GNp), chloramphenicol coupled Np (CNp), and simultaneously coupling of gentamicin and chloramphenicol on Np (GCNp) were formulated for their potential to bring resistance modulation. Data analysis of this study revealed 24.59% MRSA from dairy milk appearing potentially associated (OR> 1, p < 0.05) with most of assumed risk factors. MRSA in response to various antibiotics showed highest resistance against amoxicillin (100%), penicillin (100%), vancomycin (100%), and linezolid (90%). Zone of inhibitions were increased by 249.76% (GNp), 184.86% (CNp), and 279.76% (GCNp) in case of coupled preparations. Significant reduced minimum inhibitory concentration was observed in case of GCNp (7.8125 ± 0.00 μg/mL) followed by GNp (15.00 ± 0.00 μg/mL) and CNp (41.67 ± 18.042 μg/mL) as compared to Np alone (125.00 ± 0.00 μg/mL). Minimum bactericidal concentrations for GCNp, GNp, and CNp, and Np were 31.125, 62.5, 125, and 500 μg/mL, respectively. The study thus concluded increased prevalence of MRSA while coupling of ZnO nanoparticles with antibiotics significantly brought resistance modulation to MRSA.

Investigation and Rapid Discrimination of Food-Related Bacteria under Stress Treatments Using IR Microspectroscopy

Because the robust and rapid determination of spoilage microorganisms is becoming increasingly important in industry, the use of IR microspectroscopy, and the establishment of robust and versatile chemometric models for data processing and classification, is gaining importance. To further improve the chemometric models, bacterial stress responses were induced, to study the effect on the IR spectra and to improve the chemometric model. Thus, in this work, nine important food-relevant microorganisms were subjected to eight stress conditions, besides the regular culturing as a reference. Spectral changes compared to normal growth conditions without stressors were found in the spectral regions of 900-1500 cm^-1 and 1500-1700 cm^-1. These differences might stem from changes in the protein secondary structure, exopolymer production, and concentration of nucleic acids, lipids, and polysaccharides. As a result, a model for the discrimination of the studied microorganisms at the genus, species and strain level was established, with an accuracy of 96.6%. This was achieved despite the inclusion of various stress conditions and times after incubation of the bacteria. In addition, a model was developed for each individual microorganism, to separate each stress condition or regular treatment with 100% accuracy.

Do Iron Oxide Nanoparticles Have Significant Antibacterial Properties?

The use of metal oxide nanoparticles is one of the promising ways for overcoming antibiotic resistance in bacteria. Iron oxide nanoparticles (IONPs) have found wide applications in different fields of biomedicine. Several studies have suggested using the antimicrobial potential of IONPs. Iron is one of the key microelements and plays an important role in the function of living systems of different hierarchies. Iron abundance and its physiological functions bring into question the ability of iron compounds at the same concentrations, on the one hand, to inhibit the microbial growth and, on the other hand, to positively affect mammalian cells. At present, multiple studies have been published that show the antimicrobial effect of IONPs against Gram-negative and Gram-positive bacteria and fungi. Several studies have established that IONPs have a low toxicity to eukaryotic cells. It gives hope that IONPs can be considered potential antimicrobial agents of the new generation that combine antimicrobial action and high biocompatibility with the human body. This review is intended to inform readers about the available data on the antimicrobial properties of IONPs, a range of susceptible bacteria, mechanisms of the antibacterial action, dependence of the antibacterial action of IONPs on the method for synthesis, and the biocompatibility of IONPs with eukaryotic cells and tissues.

Preparation of ZnO nanoparticles by Electrolysis and evaluation of their antibacterial activity

This study is to prepare and characterize ZnO NPs by electrolysis method. The detailed characterization of ZnO nanoparticles was performed using ultraviolet spectroscopy, (FTIR), X-ray diffraction (XRD) analysis, electronic ice analysis and SEM scanning analysis demonstrating that the analysis of prepared ZnO nanoparticles is flower. The results of the antibacterial activity showed inhibitory activity against Pseudomonas aeruginosa, Staphylococcus aureus, E. coli, Pseudomonas aeruginosa and Bacillus subtilis.

Pectin-organophilized ZnO nanoparticles as sustainable fillers for high-density polyethylene composites

A series of nanocomposites made of high-density polyethylene (HDPE) and 10 wt% zinc oxide nanoparticles (ZnO NPs) were produced by extrusion and injection molding. The nanoparticles were prepared via a green way using the pectin-based banana peel extract as the stabilizer and a proper dispersion-providing agent. The fillers were well-dispersed in the matrix and the composites exhibited improved functional characteristics such as increased thermal stability and mechanical properties. The presence of the pectin-organophilized filler had a significant impact on the crystallization process of HDPE. The kinetics of the degradation process was also altered in comparison to the pure polymer. The fire properties of the composites were enhanced as the amount of the gas products produced during their degradation was reduced, what was confirmed by thermogravimetric analysis coupled with gas products analyses (TGA/FTIR/QMS). The structure and morphology of the materials were characterized by scanning electron microscope (SEM), infrared spectroscopy (FTIR), X-ray diffraction (XRD), and differential scanning calorimetry (DSC). Additionally, the mechanical properties were tested by tensile tests. An in-depth analysis revealed that the HDPE-pectin-ZnO interactions are crucial for the structural and performance properties of the final composite. The used biopolymer reacts with ZnO via ionic interaction and through hydrogen bond in the case of HDPE.

Zinc Oxide and Silver Nanoparticle Effects on Intestinal Bacteria

The application of nanoparticles (NPs) for food safety is increasingly being explored. Zinc oxide (ZnO) and silver (Ag) NPs are inorganic chemicals with antimicrobial and bioactive characteristics and have been widely used in the food industry. However, not much is known about the behavior of these NPs upon ingestion and whether they inhibit natural gut microflora. The objective of this study was to investigate the effects of ZnO and Ag NPs on the intestinal bacteria, namely Escherichia coli, Lactobacillus acidophilus, and Bifidobacterium animalis. Cells were inoculated into tryptic soy broth or Lactobacilli MRS broth containing 1% of NP-free solution, 0, 12, 16, 20 mM of ZnO NPs or 0, 1.8, 2.7, 4.6 mM Ag NPs, and incubated at 37 °C for 24 h. The presence and characterization of the NPs on bacterial cells were investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and energy-dispersive X-ray spectroscopy (EDS). Membrane leakage and cell viability were assessed using a UV-visible spectrophotometer and confocal electron microscope, respectively. Numbers of treated cells were within 1 log CFU/mL less than those of the controls for up to 12 h of incubation. Cellular morphological changes were observed, but many cells remained in normal shapes. Only a small amount of internal cellular contents was leaked due to the NP treatments, and more live than dead cells were observed after exposure to the NPs. Based on these results, we conclude that ZnO and Ag NPs have mild inhibitory effects on intestinal bacteria.

Nanomaterials as drug delivery systems with antibacterial properties: current trends and future priorities

Introduction:Despite extensive advances in the production and synthesis of antibiotics, infectious diseases are one of the main problems of the 21st century due to multidrug-resistant (MDR) distributing in organisms. Therefore, researchers in nanotechnology have focused on new strategies to formulate and synthesis the different types of nanoparticles (NPs) with antimicrobial properties.Areas covered:The present review focuses on nanoparticles which are divided into two groups, organic (micelles, liposomes, polymer-based and lipid-based NPs) and inorganic (metals and metal oxides). NPs can penetrate the cell wall then destroy permeability of cell membrane, the structure and function of cell macromolecules by producing of reactive oxygen species (ROS) and eventually kill the bacteria. Moreover, their characteristics and mechanism in various bacteria especially MDR bacteria and finally their biocompatibility and the factors affecting their activity have been discussed.Expert opinion:Nanotechnology has led to higher drug absorption, targeted drug delivery and fewer side effects. NPs can overcome MDR through affecting several targets in the bacteria cell and synergistically increase the effectiveness of current antibiotics. Moreover, organic NPs with regard to their biodegradability and biocompatibility characteristics can be suitable agents for medical applications. However, they are less stable in environment in comparison to inorganic NPs.

Comparative assessment of the bactericidal effect of nanoparticles of copper oxide, silver, and chitosan-silver against Escherichia coli infection in broilers

Escherichia coli infection is considered one of the most economically important multi-systemic diseases in poultry farms. Several nanoparticles such as silver, chitosan, and copper oxide are known to be highly toxic to several microbes. However, there are no data concerning their success against in vivo experimental E. coli infection in broilers. Therefore, the present study was designed to investigate the bactericidal effect of low doses of CuO-NPs (5 mg/kg bwt), Ag-NPs (0.5 mg/kg bwt), and Ch-Ag NPs (0.5 mg/kg bwt) against E. coli experimental infection in broilers. One hundred chicks were divided into five groups as follows: (1) control; (2) E. coli (4 × 108 CFU/ml) challenged; (3) E. coli +CuO-NPs; (4) E. coli +Ag-NPs; (5) E. coli +Ch-Ag NPs. The challenged untreated group, not NPs treated groups, recorded the lowest weight gain as well as the highest bacterial count and lesion score in all examined organs. The highest liver content of silver was observed in Ag-NPs treated group compared with the Ch-Ag NPs treated group. Our results concluded that Ch-Ag NPs not only had the best antibacterial effects but also acted as a growth promoter in broilers without leaving any residues in edible organs. We recommend using Ch-Ag NPs in broiler farms instead of antibiotics or probiotics.

Efficacy of metal oxide nanoparticles as novel antimicrobial agents against multi-drug and multi-virulent Staphylococcus aureus isolates from retail raw chicken meat and giblets

Staphylococcus aureus is among the most common zoonotic pathogens originating from animals consumed as food, especially raw chicken meat (RCM). As far as we know, this might be the first report that explores the efficacy of metal oxide nanoparticles (MONPs), such as zinc peroxide nanoparticles (ZnO₂-NPs), zinc oxide nanoparticles (ZnO-NPs), and titanium dioxide nanoparticles (TiO₂-NPs) against multidrug resistant (MDR) and/or pandrug resistant (PDR) S. aureus strains with a strong biofilm-producing ability isolated from RCM and giblets. The overall prevalence of coagulase-positive staphylococci was 21%, with a contamination level range between 10² and 10⁴ CFU/g. The incidence of virulence genes See (21/36), pvl (16/36), clfA (15/36), sec (12/36), tst (12/36), and sea (11/36) among S. aureus strains were relatively higher those of seb, sed, fnbA, and fnbB. For antimicrobial resistance gene distribution, most strains harbored the blaZ gene (25/36), aacA-aphD gene (24/36), mecA gene (22/36), vanA gene (20/36), and apmA gene (20/36) confirmed the prevalence of MDR among S. aureus of RCM products. However, cfr (11/36), spc (9/36), and aadE (7/36) showed a relatively lower existence. The data of antibiogram resistance profiles was noticeably heterogeneous (25 patterns) with 32 MDR and four PDR S. aureus strains. All tested strains had a very high MAR index value (>0.2) except the P11 pattern (GEN, MXF, PMB), which showed a MAR index of 0.19. Among the strong biofilm-producing ability (BPA), 14 (70%) strains were isolated from wet markets, while only six strong BPA strains were isolated from supermarkets. The mean values of BPA ranged from 2.613 ± 0.04 to 11.013 ± 0.05. Clearly, ZnO₂-NPs show significant inhibitory activity against S. aureus strains compared with those produced by the action of ZnO-NPs and TiO₂-NPs. The results of anti-inflammatory activity suggest ZnO₂-NPs as a lead compound for designing an alternative antimicrobial agent against drug-resistant and strong biofilm-producing S. aureus isolates from retail RCM and giblets.

Biofabricated Fatty Acids-Capped Silver Nanoparticles as Potential Antibacterial, Antifungal, Antibiofilm and Anticancer Agents

The current study demonstrates the synthesis of fatty acids (FAs) capped silver nanoparticles (AgNPs) using aqueous poly-herbal drug Liv52 extract (PLE) as a reducing, dispersing and stabilizing agent. The NPs were characterized by various techniques and used to investigate their potent antibacterial, antibiofilm, antifungal and anticancer activities. GC-MS analysis of PLE shows a total of 37 peaks for a variety of bio-actives compounds. Amongst them, n-hexadecanoic acid (21.95%), linoleic acid (20.45%), oleic acid (18.01%) and stearic acid (13.99%) were found predominately and most likely acted as reducing, stabilizing and encapsulation FAs in LIV-AgNPs formation. FTIR analysis of LIV-AgNPs shows some other functional bio-actives like proteins, sugars and alkenes in the soft PLE corona. The zone of inhibition was 10.0 ± 2.2-18.5 ± 1.0 mm, 10.5 ± 2.5-22.5 ± 1.5 mm and 13.7 ± 1.0-16.5 ± 1.2 against P. aeruginosa, S. aureus and C. albicans, respectively. LIV-AgNPs inhibit biofilm formation in a dose-dependent manner i.e., 54.4% ± 3.1%-10.12% ± 2.3% (S. aureus), 72.7% ± 2.2%-23.3% ± 5.2% (P. aeruginosa) and 85.4% ± 3.3%-25.6% ± 2.2% (C. albicans), and SEM analysis of treated planktonic cells and their biofilm biomass validated the fitness of LIV-AgNPs in future nanoantibiotics. In addition, as prepared FAs rich PLE capped AgNPs have also exhibited significant (p < 0.05 *) antiproliferative activity against cultured HCT-116 cells. Overall, this is a very first demonstration on employment of FAs rich PLE for the synthesis of highly dispersible, stable and uniform sized AgNPs and their antibacterial, antifungal, antibiofilm and anticancer efficacy.

Biofilms and nanoparticles: applications in agriculture

A profound need to explore eco-friendly methods to practice sustainable agriculture leads to the research and exploration of plant growth-promoting rhizobacteria (PGPRs). Biofilms are assemblages of microbial communities within a self-secreted exopolymeric matrix, adhering to different biotic and abiotic surfaces and performing a variety of desired and undesired functions. Biofilm formation by PGPRs is governed by effective root colonization of the host plant in providing plant growth promotion and stress management. Biofilms can also provide a suitable environment for the synthesis and entrapment of nanoparticles. Together, nanoparticles and PGPRs may contribute towards biocontrol and crop management. This review discusses the significance of biofilms in agriculture and their confluence with different types of nanoparticles for plant protection and improved crop production.

Advantages and prospective challenges of nanotechnology applications in fish cultures: a comparative review

Applications of nanotechnology in fish cultures have participated in getting over various difficulties that hinder fish productivity. They can achieve growth performance after adding some important minerals and vitamins in the form of nano-feed supplements like selenium, zinc, iron, and vitamin C. Also, they have an important role in reproduction, and fish medicine as antimicrobial, drug delivery, nano-vaccination, and rapid disease diagnosis. Moreover, their roles in water remediation and purification, and fish packaging are documented. On the other hand, some nanoparticles exhibit toxic effects on living organisms, which return to their tiny size, high reactivity, and permeability. They can alter many physiological functions and cause cytotoxicity, DNA damage, and histopathological changes. Also, nanotechnology applications cause new secondary pollutants to be introduced into the environment that can negatively affect fish health and the surrounding living organisms. So, in spite of the promising applications of nanotechnology to fulfill high growth performance and pathogen-free fish, there are a lot of debates about the potential toxicity of nanomaterials, their reactivity with the surrounding environment, and bioaccumulation. The present review aims to elucidate and discuss various advantages and challenges of nanotechnology applications in fish cultures. Also, it points to green nanotechnology as a promising alternative to chemical ones.

Comparative effects of zinc oxide and zinc oxide nanoparticle as feed additives on growth, feed choice test, tissue residues, and histopathological changes in broiler chickens

Zinc is an essential nutritional trace mineral required for growth and health. The aim of the current work is to compare the effects of bulk zinc oxide and zinc oxide nanoparticles (ZnO-NPs) on the growth performance, feeding behavior, and zinc residues in tissues with the associated histopathological alterations in chicken. Meanwhile, the antibacterial activity against the isolated E. coli O78 strain was evaluated. Ninety Hubbard one-day-aged broiler chicks were divided into 3 groups, 30 each: birds of the 1st group fed a basal ration, those of the 2nd group fed a ration containing zinc oxide at a dose of 3000 mg/kg diet, and chicks of the 3rd group are given a ration containing ZnO-NPs at a dose of 90 mg/kg diet from 2 to 20 days age. The experiment lasted for 35 days. Feed choice test was done at the 3rd week of age on another 12 birds. Results revealed that birds fed with ZnO-NPs showed an improvement in body weight compared with the zinc oxide-administered group. There was no reluctance from birds to both diets supplemented with either zinc oxide or ZnO-NPs, with a constant preference to ZnO-NPs diet throughout the 5-min test. The highest levels of zinc were detected in the livers, kidneys, lungs, and muscles in the 1st day following cessation of drug administration. There was no significant effect on the levels of creatinine, uric acid, AST, and ALT. Mild to moderate degenerative changes as well as necrosis could be detected in the livers and hearts following both treatments. In conclusion, nano-zinc oxide could be practically used in broiler feed at a dose of 90 mg/kg diet instead of bulk zinc oxide, at a dose of 3000 mg/kg diet, with an improved body weight. Both supplements caused no significant effects on serum parameters and had the same antibacterial activity against E. coli O78.

Effects of different concentrations of coated nano zinc oxide material on fecal bacterial composition and intestinal barrier in weaned piglets

BACKGROUND

Coated nano zinc oxide (Cnz) is a new feed or food additive, which is a potential replacement for a pharmacological dose level of ZnO. This study evaluated the positive effects of different concentrations of Cnz on the intestinal bacterial core, enterobacterial composition and mucosal barrier function in a pig model.

RESULTS

Microbiota sequencing results showed that Cnz could significantly alter the intestinal microbiota composition and metabolism. Besides increasing the richness indices (ACE and Chao1), 10% Cnz could protect the intestinal mucosal barrier through increasing the expression of occludin and zonula occludens-1 in the small intestine, increase the abundance of Lachnospiraceae UCG-004 and decrease the abundance of Ruminococcus flavefaciens compared to high ZnO diet and 5% Cnz material.

CONCLUSIONS

Cnz material at 10% supplementation is more effective than a level of 5% Cnz in increasing intestinal barrier through affecting gut microbiota. © 2020 Society of Chemical Industry.

A Dual Immunological Raman-Enabled Crosschecking Test (DIRECT) for Detection of Bacteria in Low Moisture Food

Among the physical, chemical and biological hazards that could arise with respect to food safety, bacterial contamination has been one of the main concerns in recent years. Bacterial contamination in low moisture foods (LMFs) was an emerging threat which used to draw less attention as LMFs were considered at low risk of such a hazard. Bacteria can survive in low moisture environments and cause foodborne diseases once they enter the digestive system. Common detection methods such as ELISA and PCR are not well suited to LMFs, as most of them operate under aqueous environments. In this study, a Dual Immunological Raman-Enabled Crosschecking Test (DIRECT) was developed for LMFs using a nano-scaled surface enhanced Raman scattering (SERS) biosensor platform and multivariate discriminant analysis with a portable Raman spectrometer. It could provide a limit of detection (LOD) of 102 CFU/g of bacteria in model LMFs, with a detection time of 30-45 min. It has the potential to become a quick screening method for on-site bacteria detection for LMFs to identify food safety risks in real time.

Preparation, characterization and antibacterial mechanism of the chitosan coatings modified by Ag/ZnO microspheres

BACKGROUND

To improve the physicochemical and antibacterial properties of coatings, the chitosan (CS) coatings were respectively prepared by a casting method with zinc oxide (ZnO) and silver (Ag)/ZnO microspheres as modifiers. The chemical structures and micromorphology of ZnO, Ag/ZnO microspheres and CS coatings were characterized by X-ray diffraction, Fourier-transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy and energy dispersive X-ray spectroscopy. Furthermore, using the dominant spoilage bacteria of aquatic products, Shewanella putrefaciens and Pseudomonas aeruginosa, as objects, the antibacterial activities and mechanism of the CS coatings were investigated.

RESULTS

The results show that ZnO and Ag/ZnO microspheres are dispersed homogeneously in the CS coatings. After modified by ZnO and Ag/ZnO microspheres, the mechanical properties and antibacterial abilities of the CS coatings are improved, and that of 0.5% Ag/ZnO-CS coating is the optimal. For pure CS coating, the bacterial cell membrane is damaged slightly because of the electrostatic interaction between NH³⁺ of CS and the negative charge on bacterial surface. After treated by ZnO-CS composite coating, the bacterial cell membrane is destroyed badly on account of the earlier-mentioned ion interaction and disturbing the synthesis of high molecular weight total protein.

CONCLUSION

With regard to Ag/ZnO-CS composite coating, the bacterial cell membrane is damaged seriously and cell contents are completely released due to ion interaction, disturbing the synthesis of high molecular weight total protein and low molecular weight membrane protein. Hence, Ag/ZnO-CS composite coatings are antimicrobial materials and food preservative materials with great potential application. © 2020 Society of Chemical Industry.

A review on nanotoxicity and nanogenotoxicity of different shapes of nanomaterials

Nanomaterials (NMs) generally display fascinating physical and chemical properties that are not always present in bulk materials; therefore, any modification to their size, shape, or coating tends to cause significant changes in their chemical/physical and biological characteristics. The dramatic increase in efforts to use NMs renders the risk assessment of their toxicity highly crucial due to the possible health perils of this relatively uncharted territory. The different sizes and shapes of the nanoparticles are known to have an impact on organisms and an important place in clinical applications. The shape of nanoparticles, namely, whether they are rods, wires, or spheres, is a particularly critical parameter to affect cell uptake and site-specific drug delivery, representing a significant factor in determining the potency and magnitude of the effect. This review, therefore, intends to offer a picture of research into the toxicity of different shapes (nanorods, nanowires, and nanospheres) of NMs to in vitro and in vivo models, presenting an in-depth analysis of health risks associated with exposure to such nanostructures and benefits achieved by using certain model organisms in genotoxicity testing. Nanotoxicity experiments use various models and tests, such as cell cultures, cores, shells, and coating materials. This review article also attempts to raise awareness about practical applications of NMs in different shapes in biology, to evaluate their potential genotoxicity, and to suggest approaches to explain underlying mechanisms of their toxicity and genotoxicity depending on nanoparticle shape.

Enhanced Antibacterial Activity of Silver Nanoparticles Combined with Hydrogen Peroxide Against Multidrug-Resistant Pathogens Isolated from Dairy Farms and Beef Slaughterhouses in Egypt

Purpose

The last few decades have witnessed a rapid and global increase in multidrug-resistant bacteria (MDR) emergence.

Methods

The aim of the current study is to isolate the most common MDR bacteria from dairy farms and beef slaughterhouses followed by evaluation of their antimicrobial resistance pattern and assessment of the antibacterial activity of AgNPs-H₂O₂ as an alternative to conventional antibiotics. In this regard, 200 samples were collected from two dairy farms and one beef slaughterhouse located in Dakhliya Governorate, Egypt.

Results

Interestingly, out of 120 collected samples from dairy farms, the prevalence of the isolated strains was 26.7, 23.3, 21.7, 16.7, and 11.7% for S. typhimurium, E. coli O157:H7, L. monocytogenes, K. pneumoniae and P. aeruginosa, respectively. Meanwhile, the overall prevalence was 30, 25, 22.5, 17.5, and 5% for E. coli O157:H7, L. monocytogenes, S. typhimurium, P. aeruginosa, and K. pneumoniae, respectively, for the 80 samples collected from a beef slaughterhouse. The antimicrobial susceptibility pattern elucidated that all isolated strains exhibited resistance to at least four of the tested antimicrobials, with multiple-antibiotic resistance index values (MAR) ranging between 0.44 and 0.88. Furthermore, the commercial AgNPs-H₂O₂ product was characterized by transmission electron microscopy (TEM) and zeta potential that showed spherical particles with a surface charge of -0.192 mV. The antimicrobial activity of synergized nano-silver (AgNP) with H₂O₂ product toward MDR strains was assessed via measuring minimum inhibitory concentration (MIC), minimum bactericidal concentration (MBC), and time-kill curve.

Conclusion

The present data report high prevalence rates of MDR pathogens in dairy farms and abattoirs. More importantly, AgNPs-H₂O₂ exerted broad-spectrum bactericidal activity toward MDR bacterial strains, suggesting their promising usage as safe, ecofriendly, cost-effective antibacterial agents. To our knowledge, this study is a pioneer in investigating the potential alternative antimicrobial role of silver nanoparticles for control of multiple drug-resistant pathogens in Egypt.

Green Synthesis of Zinc Oxide Nanoparticles from Pomegranate (Punica granatum) Extracts and Characterization of Their Antibacterial Activity

This study assessed the antimicrobial efficacy of synthesized zinc oxide nanoparticles produced using aqueous extracts of pomegranate leaves and flowers designated ZnO-NPs-PL, ZnO-NPs-PF. In the study, oxides of zinc were successfully employed to fabricate nanoparticles using extracts from leaves and flowers of pomegranate (Punica granatum). The nanoparticles obtained were characterized spectroscopically. X-ray diffractive analysis (XRD) revealed the elemental components and nature of the synthesized particles. The fabricated zinc oxide nanoparticle (ZnO-NPs) showed a crystalline structure. The morphology of the nanoparticles as shown by scanning electron microscopy (SEM) was unevenly spherical and the functional groups involved in stabilization, reduction and capping were confirmed using Fourier Transform Infra-Red (FT-IR) Spectroscopy. Confirmation of the nanoparticles by UV-Vis analysis showed absorption bands of 284 and 357 nm for pomegranate leaf and flower extract, respectively, mediated ZnO-NPs. Evaluation of the antimicrobial efficacy of the fabricated nanoparticles showed that ZnO-NPs were effective against all selected pathogenic strains, Staphylococcus aureus, Bacillus cereus, Pseudomonas aeruginosa, Klebsiella pneumoniae, Streptococcus pneumoniae, Salmonella diarizonae, Salmonella typhi, Enterococcus faecalis, Enterococcus faecium, Escherichia coli, Moraxella catarrhalis, Aeromonas hydrophila and Listeria monocytogenes, used in the analysis. The effectiveness of these nanoparticles could be linked to their sizes and shapes as obtained using a transmission electron microscope (TEM) and scanning electron microscope (SEM). Our reports revealed that increasing the concentration of the nanoparticles resulted in an increase in the antibacterial activity exerted by the nanoparticles, thus suggesting that both ZnO-NPs can effectively be used as alternative antibacterial agents. Further research is required to assess their mechanisms of action and toxicity.

Polyphenol Enriched Extract of Pomegranate Peel; A Novel Precursor for the Biosynthesis of Zinc Oxide Nanoparticles and Application in Sunscreens

Background: Green synthesized nanoparticles (NPs) from agricultural wastes is an area of great interest due to it is eco-friendly and profitable. Zinc oxide is an inorganic UV-filter commonly used as UV-blocker in a different industry. Methods: Zinc oxide nanoparticles (ZnO NPs) were successfully biosynthesized using Zn(NO3)2 as a substrate by polyphenol enriched fraction (PEF) of pomegranate peel. The biological activity of ZnO NPs was evaluated using MBC and MIC tests for antibacterial and DPPH assay for antioxidant potential. Sunscreen potential of NPs was determined after applying them in water-in-oil emulsions. Results: UV-Vis and FT-IR spectroscopy techniques confirmed the formation of ZnO NPs. FE-SEM characterized the morphology and purity of the biosynthesized NPs with EDAX and XRD data. The average crystalline size of ZnO NPs was found to be 22 nm. FT-IR spectroscopy revealed the role of phenolic compounds in the formation and stability of ZnO NPs. The antibacterial activity of PEF and its biosynthesized ZnO was evaluated against Staphylococcus aureus and Escherichia coli. The prepared NPs showed a higher antibacterial effect than the commercial ZnO NPs. Interestingly, the antioxidant activity was also detected for obtained NPs. The PEF powder also exhibited higher antibacterial and antioxidant activity than the standards. Furthermore, the in vitro sun protection factors were estimated after applying NPs in water-in-oil emulsions. Conclusion: This study highlighted the possibility of using PEF of pomegranate peel for the biosynthesis of ZnO NPs as well as applying its NPs in sunscreens to achieve a safe alternative to harmful chemical UV-filters commonly used in cosmetics.

Evaluation of antibacterial and cytocompatible properties of multiple-ion releasing zinc-fluoride glass nanoparticles

Zinc-fluoride glass nanoparticles (Zinc-F) release several ions, such as fluoride, zinc and calcium ions, through acid-base reactions. The aim of this study was to evaluate the antibacterial and cytotoxic properties of Zinc-F. Antibacterial tests showed that a Zinc-F eluting solution significantly reduced the turbidity and colony-forming units of Streptococcus mutans and Actinomyces naeslundii, compared to that of calcium-fluoroaluminosilicate glass nanoparticles without zinc ions. In live/dead staining, Zinc-F eluate significantly decreased green-stained bacterial cells, indicating live cells, compared with the control (no application). Human dentin coated with Zinc-F showed suppressed S. mutans and A. naeslundii biofilm formation. Additionally, Zinc-F eluate showed low cytotoxic effects in osteoblastic and fibroblastic cells. Therefore, our findings suggested that Zinc-F exhibits antibacterial and biocompatible properties through multiple-ion release.

Evaluation of the Antibacterial Activity and Cell Response for 3D-Printed Polycaprolactone/Nanohydroxyapatite Scaffold with Zinc Oxide Coating

Among 3D-printed composite scaffolds for bone tissue engineering, researchers have been attracted to the use of zinc ions to improve the scaffold's anti-bacterial activity and prevent surgical site infection. In this study, we assumed that the concentration of zinc ions released from the scaffold will be correlated with the thickness of the zinc oxide coating on 3D-printed scaffolds. We investigated the adequate thickness of zinc oxide coating by comparing different scaffolds' characteristics, antibacterial activity, and in vitro cell response. The scaffolds' compressive modulus decreased as the zinc oxide coating thickness increased (10, 100 and 200 nm). However, the compressive modulus of scaffolds in this study were superior to those of other reported scaffolds because our scaffolds had a kagome structure and were made of composite material. In regard to the antibacterial activity and in vitro cell response, the in vitro cell proliferation on scaffolds with a zinc oxide coating was higher than that of the control scaffold. Moreover, the antibacterial activity of scaffolds with 100 or 200 nm-thick zinc oxide coating on Escherichia coli was superior to that of other scaffolds. Therefore, we concluded that the scaffold with a 100 nm-thick zinc oxide coating was the most appropriate scaffold to use as a bone-regenerating scaffold, given its mechanical property, its antibacterial activity, and its in vitro cell proliferation.

Development and Evaluation of qPCR Detection Method and Zn-MgO/Alginate Active Packaging for Controlling Listeria monocytogenes Contamination in Cold-Smoked Salmon

To answer to food industry requests to monitor the presence of L. monocytogenes in cold-smoked salmon samples and to extend their shelf-life, a qPCR protocol for the detection of L. monocytogenes, and an antibacterial active packaging reinforced with zinc magnesium oxide nanoparticles (Zn-MgO NPs) were developed. The qPCR allowed the sensitive and easy detection of L. monocytogenes in naturally contaminated samples, with specificity in full agreement with the standard methods. The halo diffusion study indicated a high antibacterial efficiency of 1 mg/mL Zn-MgO NPs against L. monocytogenes, while the flow cytometry showed only moderate cytotoxicity of the nanoparticles towards mammalian cells at a concentration above 1 mg/mL. Thus, the novel active packaging was developed by using 1 mg/mL of Zn-MgO NPs to reinforce the alginate film. Cold-smoked salmon samples inoculated with L. monocytogenes and air-packed with the Zn-MgO NPs-alginate nanobiocomposite film showed no bacterial proliferation at 4 °C during 4 days. In the same condition, L. monocytogenes growth in control contaminated samples packed with alginate film alone. Our results suggest that Zn-MgO nanoparticles can extend the shelf-life of cold-smoked salmon samples.