Hybrid nanorod-polymer solar cells

Photoinduced Reversible Modulation of Fluorescence of CdSe/ZnS Quantum Dots in Solutions with Diarylethenes

Steady-state absorption and fluorescence spectra, fluorescence decay kinetics of CdSe/ZnS quantum dots (QD) with photochromic diarylethenes (DAE) in toluene have been studied. Two kinds of QDs emitting at 525 and 600 nm were investigated and DAE were selected to ensure good overlap of their photoinduced absorption band with QDs emission spectra. It has been found that photochromic molecules form complexes with QD which results in partial fluorescence quenching. A reversible modulation of QDs emission intensity which correlates with magnitude of transient photoinduced absorption band of the diarylethenes during photochromic transformations has been demonstrated.

Core-shell ZnO:Ga-SiO2 nanocrystals: limiting particle agglomeration and increasing luminescence via surface defect passivation

Heat treatment is needed to increase the luminescence intensity of ZnO:Ga particles, but it comes at the cost of higher particle agglomeration. Higher agglomeration results in low transparency of scintillating powder when embedded in a matrix and constitutes one of the biggest disadvantages, besides low light yield and low stopping power, of ZnO:Ga powder. Limiting ZnO:Ga particle size is therefore a key step in order to prepare highly luminescent and transparent composites with prospects for optical applications. In this work, SiO2 coating was successfully used to improve luminescence intensity or limitation of crystallite size growth during further annealing. Furthermore, ZnO:Ga and ZnO:Ga-SiO2 core-shells were embedded in a polystyrene matrix.

TiO2 microrods with stacked 3D nanovoids for photoelectrochemical water splitting

This paper reports an original nonstandard green concept to obtain TiO2 microrods with polyhedral densely stacked 3D nanovoids prepared via the heat treatment of a hydrogen titanate. The intermediate hydrogen titanate was synthesized by a solid-liquid-solid (SLS) route from an ammonia-saturated aqueous solution of TiOSO4 at 0 °C. The effect of the postgrowth thermal annealing procedure to remove ice (water) and the proposed mechanism to explain the underlying transitions from the intermediate precursor to nanostructured TiO2 microrods with stacked 3D nanovoids were investigated. The small-angle X-ray scattering (SAXS) analysis indicates that at temperatures above 500 °C, the release of confined ice (water) takes place, which leads to the creation of self-assembled polyhedral nanovoids open to the surface. Their size ranges from 5 to 78 nm in both length and width, with a depth of ~3.88 nm. The first use of these stacked 1D TiO2 microrods as the working electrode in a photoelectrochemical (PEC) cell for water splitting is demonstrated. The estimated value of ζ-potential depends on both annealing temperature and crystallite size. Anatase sample 1D TiO/800 with ζ-potential (−29.1) mV and average crystallite size ~68 nm was observed to be highly stable in aqueous suspension. The SLS method yields low-cost 1D TiO2 materials possessing high photoreactivity with water. The PEC measurements indicate that three-dimensional hollow structures with a controlled geometry via patterned 1D TiO2 surface are promising materials for hydrogen generation from water splitting.

Colloidal Self-Assembly of Inorganic Nanocrystals into Superlattice Thin-Films and Multiscale Nanostructures

The self-assembly of colloidal inorganic nanocrystals (NCs) offers tremendous potential for the design of solution-processed multi-functional inorganic thin-films or nanostructures. To date, the self-assembly of various inorganic NCs, such as plasmonic metal, metal oxide, quantum dots, magnetics, and dielectrics, are reported to form single, binary, and even ternary superlattices with long-range orientational and positional order over a large area. In addition, the controlled coupling between NC building blocks in the highly ordered superlattices gives rise to novel collective properties, providing unique optical, magnetic, electronic, and catalytic properties. In this review, we introduce the self-assembly of inorganic NCs and the experimental process to form single and multicomponent superlattices, and we also describe the fabrication of multiscale NC superlattices with anisotropic NC building blocks, thin-film patterning, and the supracrystal formation of superlattice structures.

Ambient synthesis of nanomaterials by in situ heterogeneous metal/ligand reactions

Coordination polymers are ideal synthons in creating high aspect ratio nanostructures, however, conventional synthetic methods are often restricted to batch-wise and costly processes. Herein, we demonstrate a non-traditional, frugal approach to synthesize 1D coordination polymers by in situ etching of zerovalent metal particle precursors. This procedure is denoted as the heterogeneous metal/ligand reaction and was demonstrated on Group 13 metals as a proof of concept. Simple carboxylic acids supply the etchant protons and ligands for metal ions (conjugate base) in a 1 : 1 ratio. This scalable reaction produces a 1D polymer that assembles into high-aspect ratio 'nanobeams'. We demonstrate control over crystal structure and morphology by tuning the: (i) metal center, (ii) stoichiometry and (iii) structure of the ligands. This work presents a general scalable method for continuous, heat free and water-based coordination polymer synthesis.

Binary Self-Assembly of Conjugated Block Copolymers and Quantum Dots at the Air-Liquid Interface into Ordered Functional Nanoarrays

Controlling the nanoscale morphology of conducting polymer/nanoparticle hybrid films is a highly desired but challenging task. Here, we report that such functional hybrid films with unprecedented structural order can be formed through the self-assembly of conjugated block copolymers and CdSe quantum dots at the air-water interface. The one-step assembly of quantum dots and block copolymers composed of polythiophene and polyethylene glycol (P3HT-b-PEG) at the fluidic interface generated a highly ordered assembly structure of P3HT nanowires and one-dimensional quantum dot arrays. Structure analyses revealed a unique self-assembly behavior and size dependency, which are distinct from the conventional self-assembly of coil-type polymers on solid substrates. Interestingly, hydrophobic quantum dots reside at the interface between P3HT and PEG domains without disrupting the P3HT packing structure, which is advantageous for the optoelectronic properties. Furthermore, large particles bridge the P3HT nanowires at both ends, while small particles decorate each P3HT/PEG interfaces, thus forming tight p-n junctions for a broad size range of nanoparticles. The nanoparticle-incorporated hybrid films showed more than an order of magnitude higher photocurrent and light sensitivity compared to polymer-only films, consistent with the assembly structure with close contact between the organic and inorganic semiconductors.

Implication of Molecular Weight on Optical and Charge Transport Anisotropy in PQT-C12 Films Fabricated by Dynamic FTM

Large area (>20 cm × 2 cm)-oriented thin films of PQT-C12 with varying molecular weight and polydispersity index (PDI) were fabricated by the ribbon-shaped floating film transfer method aiming toward their application as an active semiconductor element of organic field effect transistors (OFETs). Investigation on the influence of the molecular weight and PDI upon the extent of molecular alignment and anisotropic charge transport was systematically carried out. It has been demonstrated that high molecular weight in combination with low PDI not only leads to a very high optical anisotropy >10 but also high charge carrier anisotropy with a hole mobility of about 0.07 cm²/V·s for OFETs using parallel-oriented PQT-C12 thin films. Such a structure-property correlation is highly beneficial for the development of high performance organic electronic devices by synergistic and amicable tuning of the optoelectronic anisotropies and polymer synthetic variables.

Formation of Copper(I) Oxide- and Copper(I) Cyanide-Polyacetonitrile Nanocomposites through Strong-Field Laser Processing of Acetonitrile Solutions of Copper(II) Acetate Dimer

Irradiation studies of acetonitrile solutions of copper(II) acetate dimer ([Cu(OAc)₂]₂) using high energy, simultaneously spatially and temporally focused (SSTF) ultrashort laser pulses are reported. Under ambient conditions, irradiation for relatively short periods of time (10-20 s) selectively produces relatively small, narrowly size-dispersed (3.5 ± 0.7 nm) copper(I) oxide nanoparticles (Cu₂O NPs) embedded in CuCN-polyacetonitrile polymers generated in situ by the laser. The Cu₂O NPs become embedded in a CuCN-polyacetonitrile network as they form, stabilizing them and protecting the air-sensitive material from oxygen. Laser irradiation of acetonitrile causes fragmentation into transient radicals that initiate and terminate polymerization of acetonitrile. Control and mechanistic investigations reveal that HCN formed during laser irradiation reacts rapidly to reduce the Cu(II) centers in [Cu(OAc)₂]₂, leading to the formation of CuCN or, in the presence of water, Cu₂O nanoparticles that bind and cross-link CuCN-polyacetonitrile chains. The acetate-bridged Cu(II) dimer unit is a required structural feature that functions to preorganize and direct the Cu(II) reduction and selective formation of CuCN and Cu₂O nanoparticles. This study illustrates how rapid deposition of energy using shaped, ultrashort laser pulses can initiate multiple photolytic and thermal processes that lead to the selective formation of composite nanoparticle/polymer materials for applications in electronics and catalysis.

Wide-Range Band-Gap Tuning and High Electrical Conductivity in La- and Pb-Doped SrSnO3 Epitaxial Films

Perovskite oxide SrSnO₃ has attracted considerable attentions recently due to its high carrier mobility and high transparency. Here, we experimentally and theoretically investigated the effects of La and Pb doping on the microstructure, band gaps, and electrical properties of SrSnO₃ epitaxial thin films. X-ray diffraction analysis showed that the in-plane lattice constants of Pb-doped SrSnO₃ (SrSn_1-xPb_xO₃, x = 0-1, SSPO) films increased from 4.053 to 4.178 Å with the increase in Pb doping content. High-resolution transmission electron microscopy images revealed that SSPO films were coherently grown on LaAlO₃(001) substrates. The optical band-gap values were considerably decreased gradually from 4.43 to 2.16 eV with Pb doping content while maintaining high optical transmittance in the visible wavelength range. Density functional theory calculations showed that the narrowing of band gap was attributed to a finite overlap between Pb 6s and Sn 5s orbitals around the bottom of the conduction band. As doping with 5% La in SSPO films, the electrical conductivity was improved greatly, and transport properties were investigated through temperature-dependent resistivity and Hall measurements. A lowest room-temperature resistivity of 0.5 mΩ cm and a maximum mobility of 39.9 cm²/Vs were observed in 5% La in the SSPO film at x = 1. Such wide-range tuning of the band gaps and excellent electrical properties of La- and Pb-doped SrSnO₃ epitaxial thin films may provide promising applications in optoelectronic devices.

Formation of ZnO/Zn0.5Cd0.5Se Alloy Quantum Dots in the Presence of High Oleylamine Contents

To the best of our knowledge, this report presents, for the first time, the schematic of the possible chemical reaction for a one-pot synthesis of Zn_0.5Cd_0.5Se alloy quantum dots (QDs) in the presence of low/high oleylamine (OLA) contents. For high OLA contents, high-resolution transmission electron microscopy (HRTEM) results showed that the average size of Zn_0.5Cd_0.5Se increases significantly from 4 to 9 nm with an increasing OLA content from 4 to 10 mL. First, [Zn(OAc)₂]–OLA complex can be formed by a reaction between Zn(OAc)₂ and OLA. Then, Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD) data confirmed that ZnO is formed by thermal decomposition of the [Zn(OAc)₂]–OLA complex. The results indicated that ZnO grew on the Zn_0.5Cd_0.5Se surface, thus increasing the particle size. For low OLA contents, HRTEM images were used to estimate the average sizes of the Zn_0.5Cd_0.5Se alloy QDs, which were approximately 8, 6, and 4 nm with OLA loadings of 0, 2, and 4 mL, respectively. We found that Zn(OAc)₂ and OLA could form a [Zn(OAc)₂]–OLA complex, which inhibited the growth of the Zn_0.5Cd_0.5Se alloy QDs, due to the decreasing reaction between Zn(oleic acid)₂ and Se²⁻, which led to a decrease in particle size.

Ultrahigh Hot Carrier Transient Photocurrent in Nanocrystal Arrays by Auger Recombination

In this report, we show that a new mechanism for carrier transport in solution-processed colloidal semiconductor nanocrystal arrays exists at high excitation intensity on ultrafast time scales and allows for facile intrinsic transport between as-prepared nanocrystals over long distances. By combining a high speed photoconductive switch with an ultrafast laser excitation in a sub-40 ps photoconductor, we observed transient photocurrents with peak densities of 3 × 10⁴ - 10⁶ mA/cm² in self-assembled PbSe nanocrystals capped with long native oleic acid ligands. The ratio between the transient photocurrent peak and the steady-state dark current is 10 orders of magnitude. The transient mobility at the peak current is estimated to range between 0.5-17.5 cm²/(V s) for the various nanocrystal sizes studied, which is 6 to 9 orders of magnitude higher than the dark current steady-state mobility in PbSe, CdSe, and CdTe nanocrystals capped with native ligands. The results are analyzed using a kinetic model which attributes the ultrahigh transient photocurrent to multiple photogenerated excitons undergoing on-particle Auger recombination, followed by rapid tunneling at high energies. This mechanism is demonstrated for a wide range of PbSe nanocrystals sizes (diameters from 2.7 to 7.1 nm) and experimental parameters. Our observations indicate that native ligand-capped nanocrystal arrays are promising for optoelectronics applications wherein multiple carriers are photoinjected to interband states.

Reevaluating the effects of reorganization energy on electron transfer rate for quantum dot-molecular acceptor complexes in different solvents

The electron transfer (ET) rate in quantum dot (QD)-molecular acceptor systems is dependent upon system reorganization energy (RE, λ), which comprises contributions from solvent (λ₀) and reactants (λ_i). However, to date, the effect of λ_i on ET rate has been largely ignored. Herein, the ET from CdSe/ZnS QDs to 1-chloroanthraquinone (1-CAQ) in different solvents was investigated using ultrafast transient absorption spectroscopy as a means to evaluate the effect of λ_i on ET rate. The results revealed that ET rate is strongly solvent dependent. Amazingly, the ET rate in carbon disulfide is 300-times higher than that in n-dodecane. Theoretical calculations indicated that the λ_i contribution from 1-CAQ alone accounts for a large proportion of system RE and varies greatly in different solvents. Furthermore, the ET rate increases first and, then, decreases with the λ value in different solvents. This trend was interpreted consistently in terms of Marcus theory by adding λ_i to λ for different solvents. Thus, our present work demonstrates that the RE of the acceptor molecule has a non-negligible effect on ET rate, providing new insight into the mechanisms of ET process and for the development of QD-based devices.

A versatile simulation method for studying phase behavior and dynamics in colloidal rod and rod-polymer suspensions

Here, we present an implicit-solvent model for dynamic simulations of hard-rod and rod-polymer suspensions. Individual rods are represented by a rigid linear chain consisting of overlapping spheres which interact through a pseudohard-core potential based on the cut-and-shifted Mie (generalized Lennard-Jones) potential with exponents (50, 49). In the rod-polymer suspensions, the polymers are modeled as freely interpenetrable spheres with respect to each other, while there is the pseudohard-core repulsion between the polymer and rod spheres. Dynamic simulations with this model are carried out with a dissipative particle dynamics (DPD) thermostat-each sphere is put in a larger DPD sphere and thus interacts with others via additional pairwise frictional and random forces-which captures the effects of Brownian forces due to the solvent while conserving local momentum. The phase behavior of these models, obtained from continuous compression and expansion simulations, reproduces previous predictions based on theoretical calculations and Monte Carlo simulations. Our method is suited to study dynamic processes in these suspensions, including nucleation and self-assembly, and can be readily extended to colloidal particles of different shapes and chemistry.

Self-Assembly of Catalytically Active Supramolecular Coordination Compounds within Metal-Organic Frameworks

Supramolecular coordination compounds (SCCs) represent the power of coordination chemistry methodologies to self-assemble discrete architectures with targeted properties. SCCs are generally synthesized in solution, with isolated fully coordinated metal atoms as structural nodes, thus severely limited as metal-based catalysts. Metal-organic frameworks (MOFs) show unique features to act as chemical nanoreactors for the in situ synthesis and stabilization of otherwise not accessible functional species. Here, we present the self-assembly of Pd^II SCCs within the confined space of a pre-formed MOF (SCCs@MOF) and its post-assembly metalation to give a Pd^II-Au^III supramolecular assembly, crystallography underpinned. These SCCs@MOFs catalyze the coupling of boronic acids and/or alkynes, representative multi-site metal-catalyzed reactions in which traditional SCCs tend to decompose, and retain their structural integrity as a consequence of the synergetic hybridization between SCCs and MOFs. These results open new avenues in both the synthesis of novel SCCs and their use in heterogeneous metal-based supramolecular catalysis.

Heavy-Metal-Free Colloidal Semiconductor Nanorods: Recent Advances and Future Perspectives

Quasi-1D colloidal semiconductor nanorods (NRs) are at the forefront of nanoparticle (NP) research owing to their intriguing size-dependent and shape-dependent optical and electronic properties. The past decade has witnessed significant advances in both fundamental understanding of the growth mechanisms and applications of these stimulating materials. Herein, the state-of-the-art of colloidal semiconductor NRs is reviewed, with special emphasis on heavy-metal-free materials. The main growth mechanisms of heavy-metal-free colloidal semiconductor NRs are first elaborated, including anisotropic-controlled growth, oriented attachment, solution-liquid-solid method, and cation exchange. Then, structural engineering and properties of semiconductor NRs are discussed, with a comprehensive overview of core/shell structures, alloying, and doping, as well as semiconductor-metal hybrid nanostructures, followed by highlighted practical applications in terms of photocatalysis, photodetectors, solar cells, and biomedicine. Finally, challenges and future opportunities in this fascinating research area are proposed.

Nanoscale Photoinduced Charge Transfer with Individual Quantum Dots: Tunability through Synthesis, Interface Design, and Interaction with Charge Traps

Semiconducting colloidal quantum dots (QDs) provide an excellent platform for nanoscale charge-transfer studies. Because of their size-dependent optoelectronic properties, which can be tuned via chemical synthesis and of their versatility in surface ligand exchange, QDs can be coupled with various types of acceptors to create hybrids with controlled type (electron or hole), direction, and rate of charge flow, depending on the foreseen application, either solar harvesting, light emitting, or biosensing. This perspective highlights several examples of QD-based hybrids with controllable (tunable) rate of charge transfer obtained by various approaches, including by changing the QD core size and shell thickness by colloidal synthesis, by the insertion of molecular linkers or dielectric spacers between donor and acceptor components. We also show that subjecting QDs to external factors such as electric fields and alternate optical excitation energy is another approach to bias the internal charge transfer between charges photogenerated in the QD core and QD's surface charge traps. The perspective also provides the reader with various examples of how single nanoparticle spectroscopic studies can help in understanding and quantifying nanoscale charge transfer with QDs.

Tunable electron transfer rate in a CdSe/ZnS-based complex with different anthraquinone chloride substitutes

We use femtosecond transient absorption spectroscopy to study ultrafast electron transfer (ET) dynamics in a model donor and acceptor system using CdSe/ZnS core/shell structure quantum dots (QDs) as donors and anthraquinone (AQ) molecules as acceptors. The ET rate can be enhanced by decreasing the number of chlorine substituents in the AQ molecules because that increases the driving force, which is the energy level offset between the conduction band energy of CdSe/ZnS and the lowest upper molecular orbital potential of AQ derivatives, as confirmed by cyclic voltammetry measurements. However, the electronic coupling between the QDs and AQ derivatives, and the sum of reorganization energy of AQ molecules and solvent calculated by density functional theory are not the main reasons for the change in ET rate in three systems. Our findings provide new insights into selecting an acceptor molecule and will be useful in tuning ET processes for advanced QD-based applications.

Emission Enhancement from CdSe/ZnS Quantum Dots Induced by Strong Localized Surface Plasmonic Resonances without Damping

A high-performance exciton-localized surface plasmon (LSP) coupling system consisting of well-designed plasmonic nanostructures and CdSe/ZnS quantum dots (QDs) was fabricated by first introducing a Ta₂O₅ layer as both an adhesive coating and coupling medium. It is shown that a larger emission enhancement factor of 6 from CdSe/ZnS QDs can be obtained from the strong coupling effect between QDs and triprism Au nanoarrays and the high scattering efficiency of LSPs without damping. This can be attributed to the matching conditions and a low extinction coefficient with little damping absorption of the Ta₂O₅ layer in the system. The radiative scattering rate of Γ_LSPs can make a contribution to the spontaneous emission rate Γ and thus improve the internal quantum yield of the QDs. This strategy could be promising for practical application of metal-modified fluorescence enhancement.

Large-Area 3D Hierarchical Superstructures Assembled from Colloidal Nanoparticles

Assembling nanosized building blocks into macroscopic 3D complex structures is challenging. Here, nanosized metal and semiconductor building blocks with a variety of sizes and shapes (spheres, stars, and rods) are successfully assembled into a broad range of hierarchical (nanometer to micrometer) assemblies of functional materials in centimeter size using butterfly wings as templates. This is achieved by the introduction of steric hindrance to the assembly process, which compensates for attraction from the environmentally sensitive hydrogen bonds and prevents the aggregation of nanosized building blocks. Of these materials, Au nanostar assemblies show a superior enhancement in surface-enhanced Raman scattering (SERS) performance (rhodamine 6G, 1506 cm^-1 ) under 532, 633, and 780 nm excitation-this is 3.1-4.4, 3.6-3.9, and 2.9-47.3 folds surpassing Au nanosphere assemblies and commercial SERS substrates (Q-SERS), respectively. This method provides a versatile route for the assembly of various nanosized building blocks into different 3D superstructures and for the construction of hybrid nanomaterials and nanocomposites.

Functional Printing of Conductive Silver-Nanowire Photopolymer Composites

We investigated the fabrication and functional behaviour of conductive silver-nanowire-polymer composites for prospective use in printing applications. Silver-nanowires with an aspect ratio of up to 1000 were synthesized using the polyol route and embedded in a UV-curable and printable polymer matrix. Sheet resistances in the composites down to 13 Ω/sq at an optical transmission of about 90% were accomplished. The silver-nanowire composite morphology and network structure was investigated by electron microscopy, atomic force microscopy, profilometry, ellipsometry as well as surface sensitive X-ray scattering. By implementing different printing applications, we demonstrate that our silver nanowires can be used in different polymer composites. On the one hand, we used a tough composite for a 2D-printed film as top contact on a solar cell. On the other hand, a flexible composite was applied for a 3D-printed flexible capacitor.

Development of Paint-Type Dye-Sensitized Solar Cell Using Carbon Nanotube Paint

This paper proposes paint-type dye-sensitized solar cells (DSCs). DSCs, one type of solar cell, generally consist of a dye-attached semiconducting electrode, a metallic electrode, and an electrolyte. The DSC generates power through the excitation of the electrons in the dyes and the oxidation-reduction reaction between the dyes and the electrolyte. For our paint-type DSC, we made two electrodes by painting two types of paint on substrates. We used carbon nanotubes (CNTs) as the paint material because they have both semiconducting and metallic properties. This enabled us to prepare semiconducting and metallic electrodes easily by simply painting with the CNT paint. As a result of testing, we determined that our DSCs were capable of power generation. Our paint-type DSCs have the potential to provide power as a unique and useful device for daily life in the near future.

Morphology Tuning of ZnO/P3HT/P3HT- b-PEO Hybrid Films Deposited via Spray or Spin Coating

Hybrid films of zinc oxide (ZnO) and poly(3-hexylthiophen-2,5-diyl) (P3HT) show promising characteristics for application in hybrid bulk-heterojunction solar cells (HBSCs). However, the incompatibility of ZnO and P3HT may lead to a reduced interface area, thus reducing the probability of exciton separation and consequently lowering solar cell efficiencies. Here, a diblock copolymer P3HT- b-poly(ethylene oxide) (PEO) is introduced to improve the interface between ZnO and P3HT. ZnO is synthesized via a block copolymer assisted sol-gel approach, and the used zinc precursor is directly incorporated into the PEO blocks. Thus, the possibility of aggregation is reduced for both the inorganic and the organic components, and a good intermixing is ascertained. Two deposition methods, namely, spray and spin coating, are compared with respect to the resulting film structure, which is investigated with scanning electron microscopy and time-of-flight grazing-incidence small-angle neutron scattering measurements. Both the surface and inner morphologies reveal that the spin coated samples possess smaller and less diverse domain sizes than the sprayed films. Due to the advantage of spray coating in large-scale production, the morphology of the sprayed samples is tailored more meticulously by changing the weight fraction of ZnO in the films. The sprayed hybrid films show smaller domains and less aggregation with decreasing the amount of ZnO. This reveals that both the deposition method and composition of the ZnO/P3HT/P3HT- b-PEO hybrid films play an important role for tailoring the film morphology and thus for improving the performance of HBSCs in future application.

A novel route to the formation of 3D nanoflower-like hierarchical iron oxide nanostructure

The present work reports the formation of 3D nanoflower-like morphology of iron alkoxide via the anodization of Fe sheet in ethylene glycol (EG) electrolyte. XRD, FESEM, EDX, XPS, Raman and FTIR are applied to characterize the samples. SEM results show that the as-anodized sample is composed of 3D nanoflowers with hierarchical nanosheets beneath it. The average width of the nanoflower petal is ∼25 nm and the length is about 1 μm. The 3D nanoflowers are transformed into spherical nanoparticles (NPs) with uniform size when calcined at elevated temperature. XRD and Raman results indicate that the 3D nanoflowers consist of akaganeite, which transforms into magnetite and hematite by annealing. XPS and FTIR results confirm that the nanoflowers contain significant amounts of F, C and OH, which are drastically decreased after annealing. The formation of 3D nanoflower-like morphology can be attributed to EG. A possible formation mechanism of 3D nanoflowers and their transformation into NPs is proposed. We showed that the morphology of the as-anodized iron oxide can be tailored simply by changing the electrolyte. The anodization of Fe sheet in glycerol-based electrolyte under identical conditions produced nanotubes.

Synthesis of salt-stable fluorescent nanoparticles (quantum dots) by polyextremophile halophilic bacteria

Here we report the biological synthesis of CdS fluorescent nanoparticles (Quantum Dots, QDs) by polyextremophile halophilic bacteria isolated from Atacama Salt Flat (Chile), Uyuni Salt Flat (Bolivia) and the Dead Sea (Israel). In particular, a Halobacillus sp. DS2, a strain presenting high resistance to NaCl (3-22%), acidic pH (1-4) and cadmium (CdCl2 MIC: 1,375 mM) was used for QDs biosynthesis studies. Halobacillus sp. synthesize CdS QDs in presence of high NaCl concentrations in a process related with their capacity to generate S2- in these conditions. Biosynthesized QDs were purified, characterized and their stability at different NaCl concentrations determined. Hexagonal nanoparticles with highly defined structures (hexagonal phase), monodisperse size distribution (2-5 nm) and composed by CdS, NaCl and cysteine were determined by TEM, EDX, HRXPS and FTIR. In addition, QDs biosynthesized by Halobacillus sp. DS2 displayed increased tolerance to NaCl when compared to QDs produced chemically or biosynthesized by non-halophilic bacteria. This is the first report of biological synthesis of salt-stable QDs and confirms the potential of using extremophile microorganisms to produce novel nanoparticles. Obtained results constitute a new alternative to improve QDs properties, and as consequence, to increase their industrial and biomedical applications.

Ligand-free preparation of polymer/CuInS2 nanocrystal films and the influence of 1,3-benzenedithiol on their photovoltaic performance and charge recombination properties

Bulk heterojunction solar cells based on conjugated polymer donors and fullerene-derivative acceptors have received much attention in the last decade. Alternative acceptors like organic non-fullerene acceptors or inorganic nanocrystals have been investigated to a lesser extent; however, they also show great potential. In this study, one focus is set on the investigation of the in situ growth of copper indium sulfide nanocrystals in a conjugated polymer matrix. This preparation method allows the fabrication of a hybrid active layer without long-chain ligands, which could hinder charge separation and transport. In contrast, surfactants for the passivation of the nanocrystal surface are missing. To tackle this problem, we modified the absorber layer with 1,3-benzenedithiol and investigated the influence on charge transfer and solar cell performance. Using ToF-SIMS measurements, we could show that 1,3-benzenedithiol is successfully incorporated and homogeneously distributed in the absorber layer, which significantly increases the power conversion efficiency of the corresponding solar cells. This can be correlated to an improved charge transfer between the nanocrystals and the conjugated polymer as revealed by transient absorption spectroscopy as well as prolonged carrier lifetimes as disclosed by transient photovoltage measurements.

A General One-Pot Approach to Synthesize Binary and Ternary Metal Sulfide Nanocrystals

A general one-pot approach is developed to synthesize a series of binary metal sulfide nanocrystals (NCs) including PbS, Cu₂S, ZnS, CdS, Ag₂S, and ternary CuInS₂ and CdS:Cu(I) NCs. This synthetic approach involves thermal decomposition of the mixture of inorganic metal salts and n-dodecanethiol (DDT) without pre-synthesis of any organometallic precursors. In this method, layered metal-thiolate compound is formed at the beginning of the reaction and then this intermediate compound is decomposed into small particles, leading to further growth as the reaction time increases. The as-obtained CdS NCs exhibits a broad but weak surface-state emission, and the Cu(I) doping leads to a red-shift of the emission band due to the Cu(I)-related emission. It is expected that this one-pot approach can be extended to prepare multinary metal sulfide NCs.

Nanosized iron telluride for simultaneous nanomolar voltammetric determination of dopamine, uric acid, guanine and adenine

Herein, an efficient electrochemical sensor based on nano-sized iron telluride material (FeTe₂) have been developed for the first time for simultaneous nanomolar determination of dopamine, uric acid, guanine and adenine molecules.

Cation exchange synthesis of CuInxGa1−xSe2 nanowires and their implementation in photovoltaic devices

CuIn_xGa_1−xSe₂ (CIGS) nanowires were synthesized for the first time through an in situ cation exchange reaction by using CuInSe₂ (CIS) nanowires as a template material and Ga-OLA complexes as the Ga source. These CIGS nanowires maintain nearly the same morphology as CIS nanowires, and the Ga/In ratio can be controlled through adjusting the concentration of Ga-OLA complexes. The characteristics of adjustable band gap and highly effective light-absorbances have been achieved for these CIGS nanowires. The light-absorbing layer in photovoltaic devices (PVs) can be assembled by employing CIGS nanowires as a solar-energy material for enhancing the photovoltaic response. The highest power conversion efficiency of solar thin film semiconductors is more than 20%, achieved by the Cu(In_xGa_1−x)Se₂ (CIGS) thin-film solar cells. Therefore, these CIGS nanowires have a great potential to be utilized as light absorber materials for high efficiency single nanowire solar cells and to generate bulk heterojunction devices.

CuIn_xGa_1−xSe₂ (CIGS) nanowires were synthesized for the first time through an in situ cation exchange reaction by using CuInSe₂ (CIS) nanowires as a template material and Ga-OLA complexes as the Ga source.

Sb2S3 solar cells: functional layer preparation and device performance

This review focuses on Sb₂S₃ solar cell functional layers, including their preparation methodologies, morphologies, structures, and photovoltaic performance.

In situ grown silver bismuth sulfide nanorod arrays and their application to solar cells

AgBiS₂ nanorod arrays are produced in situ by spin-coating and annealing. They are applied to photovoltaic devices to give an efficiency of 1.4%.

Enhanced performance of PTB7-Th:PCBM based active layers in ternary organic solar cells

The present study aims at understanding the role of incorporating Cu₂S nanocrystals (NCs) as a third component in ternary organic solar cells.

Enhancement of the band edge emission of CdSe nano-tetrapods by suppression of surface trapping

Preparation of CdSe nano-tetrapods in a controlled environment to eliminate radiative surface state emission.

Synthesis and photophysical properties of fullerene derivatives containing a C60-fluorene core

Three novel fullerene derivatives were synthesized, which could be used as electron acceptors in the P3HT-based organic photovoltaic cells.

Heterojunction Area-Controlled Inorganic Nanocrystal Solar Cells Fabricated Using Supra-Quantum Dots

A supra-quantum dot (SQD) is a three-dimensional structure formed by the attachment of quantum dots. The SQDs have sizes of tens of nanometer and they maintain the characteristics of the individual quantum dots fairly well. Moreover, their sizes and elemental compositions can be tuned precisely. On the basis of their unique features, in this work, SQDs are used as constituents of the interpenetrating photoactive layers of inorganic nanocrystal p-n heterojunction solar cells to control the p-type and n-type domain sizes (i.e., p-n heterojunction areas) for optimizing the charge-carrier collection. SQD-containing p-n heterojunction solar cells exhibit improved charge transport and thereby higher power conversion efficiency (PCE) (3.03%) owing to their intermediate p-type and n-type domain sizes, which are between those of a bilayer nanorod p-n heterojunction solar cell (PCE: 1.21%) and an interpenetrating nanorod p-n heterojunction solar cell (PCE: 2.40%). This work demonstrates that the self-assembly of nanoscale materials can be utilized for tailoring the spatial distributions of charge carriers, which is beneficial for obtaining an enhanced device performance.

Synthesis of 3,4-Biaryl-2,5-Dichlorothiophene through Suzuki Cross-Coupling and Theoretical Exploration of Their Potential Applications as Nonlinear Optical Materials

We report herein the efficient one-pot synthesis of 3,4-biaryl-2,5-dichlorothiophene derivatives (2a–2i) via a palladium-catalyzed Suzuki cross-coupling reaction. A series of thiophene derivatives were synthesized, starting from 3,4-dibromo-2,5-dichlorothiophene (1) and various arylboronic acids using Pd(PPh3)4 and K3PO4 with moderate to good yields. For further insights about the structure and property relationship, density functional theory (DFT) calculations were performed. A relaxed potential energy surface (PES) scan was performed to locate the minimum energy structure. A frontier molecular orbitals analysis was performed to explain the reactivity of all synthesized derivatives. As the synthesized derivatives had extended conjugations, therefore the first hyperpolarizability (βo) was calculated to investigate their potential as non-linear optical (NLO) materials and significant βo values were found for the 2b and 2g derivatives.

A generalizable method for the construction of MOF@polymer functional composites through surface-initiated atom transfer radical polymerization

A universal method to grow polymers on MOF surfaces with well-defined thickness, sequence and functionality.

We report a generalizable approach to construct MOF@polymer functional composites through surface-initiated atom transfer radical polymerization (SI-ATRP). Unlike conventional SI-ATRP that requires covalent pre-anchoring of the initiating group on substrate surfaces, in our approach, a rationally designed random copolymer (RCP) macroinitiator first self-assembles on MOF surfaces through inter-chain hydrogen bond crosslinking. Subsequent polymerization in the presence of a crosslinking monomer covalently threads these polymer chains into a robust network, physically confining the MOF particle inside the polymer shell. We demonstrated the universality of this approach by growing various polymers on five MOFs of different metals (Zr, Zn, Co, Al, and Cr) with complete control over shell thickness, functionality and layer sequence while still retaining the inherent porosity of the MOFs. Moreover, the wettability of UiO-66 can be continuously tuned from superhydrophilic to superhydrophobic simply through judicious monomer(s) selection. We also demonstrated that a 7 nm polystyrene shell can effectively shield UiO-66 particles against 1 M H₂SO₄ and 1 M NaOH at elevated temperature, enabling their potential application in demanding chemical environments.

Ultrafast Dynamics of Charge Transfer and Photochemical Reactions in Solar Energy Conversion

For decades, ultrafast time-resolved spectroscopy has found its way into an increasing number of applications. It has become a vital technique to investigate energy conversion processes and charge transfer dynamics in optoelectronic systems such as solar cells and solar-driven photocatalytic applications. The understanding of charge transfer and photochemical reactions can help optimize and improve the performance of relevant devices with solar energy conversion processes. Here, the fundamental principles of photochemical and photophysical processes in photoinduced reactions, in which the fundamental charge carrier dynamic processes include interfacial electron transfer, singlet excitons, triplet excitons, excitons fission, and recombination, are reviewed. Transient absorption (TA) spectroscopy techniques provide a good understanding of the energy/electron transfer processes. These processes, including excited state generation and interfacial energy/electron transfer, are dominate constituents of solar energy conversion applications, for example, dye-sensitized solar cells and photocatalysis. An outlook for intrinsic electron/energy transfer dynamics via TA spectroscopic characterization is provided, establishing a foundation for the rational design of solar energy conversion devices.