Radical intermediates in photoinduced reactions on TiO2 (an EPR spin trapping study)

Photo-Reduction of CO₂ by VIS Light on Polythiophene-ZSM-5 Zeolite Hybrid Photo-Catalyst

A new hybrid photo-catalyst based on ZSM-5 zeolite suitable for reduction of carbon dioxide was synthesized. The photo-catalyst was prepared by oxidative polymerization of thiophene with FeCl₃ in the presence of ZSM-5 with participation of ultrasound. The synthesized photo-catalyst strongly absorbs light radiation up to approx. 650 nm, with the absorption edge in the NIR region. Reactive radicals were generated by VIS light irradiation in an aqueous suspension consisting of the photo-catalyst with CO₂. Formic acid and acetic acid were generated as the main products of the CO₂ reduction. EPR spin trapping technique was applied to identify the reactive radical intermediates. In this work, the mechanism of product formation is also discussed.

Nanostructured TiO2-induced photocatalytic stress enhances the antioxidant capacity and phenolic content in the leaves of Vitis vinifera on a genotype-dependent manner

Over the past decades, nanotechnology has received great attention and brought revolutionary solutions for a number of challenges in scientific fields. Industrial, agricultural and medical applications of engineered nanomaterials have increased intensively. The ability of titanium dioxide nanoparticles (TiO₂ NPs) to produce reactive oxygen species (ROS), when excited by ultra-violet (UV) light, makes them useful for effectively inactivate various pathogens. It is known that ROS also have signalling role in living organisms, therefore, TiO₂ NPs-induced ROS can influence both enzymatic and non-enzymatic defence systems, and could play a role in the resistance of plants to pathogens. Herein, we studied the photocatalytic stress responses of grapevine (Vitis vinifera L.) as model plant, when exposed to a well-known photocatalyst, Degussa P25 TiO₂ NPs. The photocatalytically produced ROS such as superoxide anion, hydroxyl radical and singlet oxygen were confirmed by electron paramagnetic resonance spectroscopy. Foliar exposure of five red cultivars (Cabernet sauvignon, Cabernet franc, Merlot, Kékfrankos and Kadarka) was carried out in blooming phenophase under field condition where plants are exposed to natural sunlight with relatively high UV radiation (with a maximum of ~ 45 W m^-2). After two weeks of exposure, the effects of photogenerated ROS on the total phenolic content, antioxidant capacity, flavonol profile and the main macro-, microelements of the leaves were studied in detail. We found that foliar application of TiO₂ NPs boosted the total phenolic content and biosynthesis of the leaf flavonols depending on the grapevine variety. Photocatalytically active TiO₂ NPs also increased K, Mg, Ca, B and Mn levels in the leaves as shown by ICP-AES measurements.

Boosting Modulation of Oxide Semiconductors via Voltage-Based Ambi-Ionic Migration

In recent years, high-performance amorphous oxide semiconductor thin-film transistor (AOS TFT) technology is required to meet the increasing demand for novel displays, such as rollable, transparent, or augmented reality head-up displays. It has been demonstrated that voltage-based modulation techniques for AOS-based active layers can achieve high-performance AOS TFTs. The voltage-based modulation technique allows specific ions to migrate into the active layer depending on the polarity of the applied voltage, thus easily modulating the active layer. Additionally, potassium superoxide (KO₂) solution is employed in AOS TFTs as a source of potassium (K⁺) and highly reactive superoxide radical (O₂^•-) ions. The K⁺ and O₂^•- ions in the KO₂ solution are controlled by an applied voltage bias and rapidly migrate into the active layer, directly changing its chemical composition and electrical properties. AOS TFTs that use this technique exhibit better electrical performance than conventional AOS TFTs: the field-effect mobility improved from 10.05 to 15.31 cm²/V·s; the subthreshold swing decreased from 0.44 to 0.33 V/dec; the I_on/off ratio increased from 1.24 × 10⁷ to 3.17 × 10⁸; and the threshold voltage shift decreased from 5.2 to 3.4 V under a positive bias stress test conducted over 10 000 s. Ultimately, this approach to modulating the internal ion distribution in oxide semiconductors could provide opportunities for various AOS devices to attain desirable electrical characteristics.

Titanium-Carboxylate Metal-Organic Framework Based on an Unprecedented Ti-Oxo Chain Cluster

Titanium(IV)-based metal-organic frameworks (Ti-MOFs) have received significant attention in recent years due to their numerous photocatalytic applications. We herein prepare the single-crystalline Ti-carboxylate MOF (DGIST-1) composed of an unprecedented Ti-oxo chain cluster and the porphyrinic ligand, TCPP (tetrakis(4-carboxyphenyl)porphyrin). Preformed Ti-oxo clusters were used as Ti⁴⁺ sources to avoid the spontaneous hydrolysis and condensation reactions of traditional Ti-alkoxide precursors, thus, enabling the formation of the highly crystalline Ti-MOF. The successfully activated DGIST-1 exhibited a higher surface area (i.e., 1957.3 m²  g^-1 ) than previously reported Ti-MOFs due to its high crystallinity. Furthermore, the visible-light-responsive photocatalytic activity of DGIST-1 was confirmed by the simultaneous generation of singlet oxygen (¹ O₂ ) and superoxide (^. O₂ ^- ) species, in addition to the highly efficient and selective oxidation of benzyl alcohol to benzaldehyde.

Copper(II) Thiosemicarbazone Complexes and Their Proligands upon UVA Irradiation: An EPR and Spectrophotometric Steady-State Study

X- and Q-band electron paramagnetic resonance (EPR) spectroscopy was used to characterize polycrystalline Cu(II) complexes that contained sodium 5-sulfonate salicylaldehyde thiosemicarbazones possessing a hydrogen, methyl, ethyl, or phenyl substituent at the terminal nitrogen. The ability of thiosemicarbazone proligands to generate superoxide radical anions and hydroxyl radicals upon their exposure to UVA irradiation in aerated aqueous solutions was evidenced by the EPR spin trapping technique. The UVA irradiation of proligands in neutral or alkaline solutions and dimethylsulfoxide (DMSO) caused a significant decrease in the absorption bands of aldimine and phenolic chromophores. Mixing of proligand solutions with the equimolar amount of copper(II) ions resulted in the formation of 1:1 Cu(II)-to-ligand complex, with the EPR and UV-Vis spectra fully compatible with those obtained for the dissolved Cu(II) thiosemicarbazone complexes. The formation of the complexes fully inhibited the photoinduced generation of reactive oxygen species, and only subtle changes were found in the electronic absorption spectra of the complexes in aqueous and DMSO solutions upon UVA steady-state irradiation. The dark redox activity of copper(II) complexes and proligand/Cu(II) aqueous solutions towards hydrogen peroxide which resulted in the generation of hydroxyl radicals, was confirmed by spin trapping experiments.

Unveiling point defects in titania mesocrystals: a combined EPR and XPS study

Titania mesocrystals, prepared using a polyethylene template, were studied by a combination of electron microscopy, XPS and EPR techniques.

Novel visible light-driven Cu-based MOFs/Ag2O composite photocatalysts with enhanced photocatalytic activity toward the degradation of orange G: their photocatalytic mechanism and optimization study

The present work is devoted to the synthesis of two visible light-driven Cu-based metal organic frameworks composited with Ag₂O nanoparticles.

Degradation of 2,4,6-trichlorophenol with peroxymonosulfate catalyzed by soluble and supported iron porphyrins

Degradation of 2,4,6-trichloropenol (TCP) with peroxymonosulfate (PMS) catalyzed by iron porphyrin tetrasulfonate ([FePTS)] was investigated in an 8-to-1 (v/v) CH₃OH-H₂O mixture. Typical reaction medium contained a 4.00 mL methanol solution of TCP (0.100 mmol), a 0.50 mL aqueous solution of catalyst (5.0 × 10^-4 mmol), and 0.100 mmol PMS (as 0.031 g of Oxone). The reaction was performed at ambient temperature. The conversion of TCP was 74% in 30 min and 80% in 6 h when the catalyst was [FePTS]. Amberlite IRA-900 supported [FePTS] catalyst was also prepared. In the recycling experiments the homogeneous [FePTS] lost its activity after the first cycle, while [FePTS]-Amberlite IRA 900 maintained its activity for the first 2 cycles. After the second cycle, the conversion of TCP dropped to <10% for Amberlite IRA-900 supported [FePTS] catalyst. The degradation of TCP with PMS was also attempted using cobalt, copper, nickel and palladium porphyrin tetrasulfonate catalysts, however, no catalytic activity was observed with these structures.

Selective aerobic oxidation reactions using a combination of photocatalytic water oxidation and enzymatic oxyfunctionalisations

Peroxygenases offer attractive means to address challenges in selective oxyfunctionalisation chemistry. Despite their attractiveness, the application of peroxygenases in synthetic chemistry remains challenging due to their facile inactivation by the stoichiometric oxidant (H₂O₂). Often atom inefficient peroxide generation systems are required, which show little potential for large scale implementation. Here we show that visible light-driven, catalytic water oxidation can be used for in situ generation of H₂O₂ from water, rendering the peroxygenase catalytically active. In this way the stereoselective oxyfunctionalisation of hydrocarbons can be achieved by simply using the catalytic system, water and visible light.

Selective Activation of C-H Bonds in a Cascade Process Combining Photochemistry and Biocatalysis

Selective oxyfunctionalizations of inert C-H bonds can be achieved under mild conditions by using peroxygenases. This approach, however, suffers from the poor robustness of these enzymes in the presence of hydrogen peroxide as the stoichiometric oxidant. Herein, we demonstrate that inorganic photocatalysts such as gold-titanium dioxide efficiently provide H₂ O₂ through the methanol-driven reductive activation of ambient oxygen in amounts that ensure that the enzyme remains highly active and stable. Using this approach, the stereoselective hydroxylation of ethylbenzene to (R)-1-phenylethanol was achieved with high enantioselectivity (>98 % ee) and excellent turnover numbers for the biocatalyst (>71 000).

Polysulfides and products of H2S/S-nitrosoglutathione in comparison to H2S, glutathione and antioxidant Trolox are potent scavengers of superoxide anion radical and produce hydroxyl radical by decomposition of H2O2

Exogenous and endogenously produced sulfide derivatives, such as H₂S/HS^-/S^2-, polysulfides and products of the H₂S/S-nitrosoglutathione interaction (S/GSNO), affect numerous biological processes in which superoxide anion (O₂^-) and hydroxyl (OH) radicals play an important role. Their cytoprotective-antioxidant and contrasting pro-oxidant-toxic effects have been reported. Therefore, the aim of our work was to contribute to resolving this apparent inconsistency by studying sulfide derivatives/free radical interactions and their consequent biological effects compared to the antioxidants glutathione (GSH) and Trolox. Using the electron paramagnetic resonance (EPR) spin trapping technique and O₂^-, we found that a polysulfide (Na₂S₄) and S/GSNO were potent scavengers of O₂^- and cPTIO radicals compared to H₂S (Na₂S), GSH and Trolox, and S/GSNO scavenged the DEPMPO-OH radical. As detected by the EPR spectra of DEPMPO-OH, the formation of OH in physiological solution by S/GSNO was suggested. All the studied sulfide derivatives, but not Trolox or GSH, had a bell-shaped potency to decompose H₂O₂ and produced OH in the following order: S/GSNO > Na₂S₄ ≥ Na₂S > GSH = Trolox = 0, but they scavenged OH at higher concentrations. In studies of the biological consequences of these sulfide derivatives/H₂O₂ properties, we found the following: (i) S/GSNO alone and all sulfide derivatives in the presence of H₂O₂ cleaved plasmid DNA; (ii) S/GSNO interfered with viral replication and consequently decreased the infectivity of viruses; (iii) the sulfide derivatives induced apoptosis in A2780 cells but inhibited apoptosis induced by H₂O₂; and (iv) Na₂S₄ modulated intracellular calcium in A87MG cells, which depended on the order of Na₂S₄/H₂O₂ application. We suggest that the apparent inconsistency of the cytoprotective-antioxidant and contrasting pro-oxidant-toxic biological effects of sulfide derivatives results from their time- and concentration-dependent radical production/scavenging properties and their interactions with O₂^-, OH and H₂O₂. The results imply a direct involvement of sulfide derivatives in O₂^- and H₂O₂/OH free radical pathways modulating antioxidant/toxic biological processes.

Abrogated Cell Contact Guidance on Amino-Functionalized Microgrooves

Topographical and chemical features of biomaterial surfaces affect the cell physiology at the interface and are promising tools for the improvement of implants. The dominance of the surface topography on cell behavior is often accentuated. Striated surfaces induce an alignment of cells and their intracellular adhesion-mediated components. Recently, it could be demonstrated that a chemical modification via plasma polymerized allylamine was not only able to boost osteoblast cell adhesion and spreading but also override the cell alignment on stochastically machined titanium. In order to discern what kind of chemical surface modifications let the cell forget the underlying surface structure, we used an approach on geometric microgrooves produced by deep reactive ion etching (DRIE). In this study, we systematically investigated the surface modification by (i) methyl-, carboxyl-, and amino functionalization created via plasma polymerization processes, (ii) coating with the extracellular matrix protein collagen-I or immobilization of the integrin adhesion peptide sequence Arg-Gly-Asp (RGD), and (iii) treatment with an atmospheric pressure plasma jet operating with argon/oxygen gas (Ar/O₂). Interestingly, only the amino functionalization, which presented positive charges at the surface, was able to chemically disguise the microgrooves and therefore to interrupt the microtopography induced contact guidance of the osteoblastic cells MG-63. However, the RGD peptide coating revealed enhanced cell spreading as well, with fine, actin-containing protrusions. The Ar/O₂-functionalization demonstrated the best topography handling, e.g. cells closely attached even to features such as the sidewalls of the groove steps. In the end, the amino functionalization is unique in abrogating the cell contact guidance.

Determination of bifonazole and identification of its photocatalytic degradation products using UPLC-MS/MS

The main goal of the presented work was to investigate the effect of ZnO or/and TiO₂ on the stability of bifonazole in solutions under UVA irradiation. To this end, a simple and reproducible UPLC method for the determination of bifonazole in the presence of its photocatalytic degradation products was developed. Linearity was studied in the range of 0.0046-0.15 mg mL^-1 with a determination coefficient of 0.9996. Bifonazole underwent a photocatalytic degradation process under the experimental conditions used. Comparative studies showed that combination of TiO₂ /ZnO (1:1 w/w) was a more effective catalyst than TiO₂ or ZnO with a degradation rate of up to 67.57% after 24 h of irradiation. Further, kinetic analyses indicated that the photocatalytic degradation of bifonazole in the mixture of TiO₂ /ZnO can be described by a pseudo-first order reaction. Statistical comparison clearly indicated that the presence of TiO₂ /ZnO also affected the stability of bifonazole from a cream preparation after 15 h of UVA exposure (p < 0.05). Ten photodegradation products of bifonazole were identified for the first time and their plausible fragmentation pathways, derived from MS/MS data, were proposed. The main pathway in the photocatalytic transformation of bifonazole in the presence of ZnO or/and TiO₂ involves hydroxylation of the methanetriyl group and/or adjacent phenyl rings and cleavage of the imidazole moiety.

A site-holding effect of TiO2 surface hydroxyl in the photocatalytic direct synthesis of 1,1-diethoxyethane from ethanol

Two different effects of TiO₂ surface hydroxyl: an indirect site-holding effect on the C–O coupling process of neat ethanol and direct part of the reaction in the C–C coupling process of ethanol–H₂O.

The Role of Coordination Environment and pH in Tuning the Oxidation Rate of Europium(II)

The Eu^II/III redox couple offers metal-based oxidation-sensing with magnetic resonance imaging making the study of Eu^II oxidation chemistry important in the design of new probes. Accordingly, we explored oxidation reactions with a set of Eu^II -containing complexes. Superoxide formation from the reaction between Eu^II and dioxygen was observed using electron paramagnetic resonance spectroscopy. Additionally, oxidation kinetics of three Eu^II -containing complexes with bromate and glutathione disulfide at pH values, including 5 and 7, is reported. In the reaction with bromate, the oxidation rate of two of the complexes increased by 7.3 and 6.7 times upon decreasing pH from 7 to 5, but the rate increased by 17 times for a complex containing amide functional groups over the same pH range. The oxidation rate of a fluorobenzo-functionalized cryptate was relatively slow, indicating that the ligand used to impart thermodynamic oxidative stability might also be useful for controlling oxidation kinetics.

Light-Induced Motion of Microengines Based on Microarrays of TiO2 Nanotubes

An electrochemical approach for manufacturing light-driven nanostructured titanium dioxide (TiO₂ ) microengines with controlled spatial architecture for improved performance is reported. The microengines based on microscale arrays of TiO₂ nanotubes with variable (50-120 nm) inner diameter show a quasi-ordered arrangement of nanotubes, being the smallest tubular entities for catalytic microengines reported to date. The nanotubes exhibit well defined crystalline phases depending upon the postfabrication annealing conditions that determine the microengines' efficiency. When exposed to UV-light, the microarrays of TiO₂ nanotubes exhibiting conical internal shapes show directed motion in confined space, both in the presence and absence of hydrogen peroxide. In the former case, two different motion patterns related to diffusiophoresis and localized nanobubble generation inside of the tubes due to the photocatalytic decomposition of H₂ O₂ are disclosed. Controlled pick-up, transport, and release of individual and agglomerated particles are demonstrated using the UV light irradiation of microengines. The obtained results show that light-driven microengines based on microarrays of TiO₂ nanotubes represent a promising platform for controlled micro/nanoscale sample transportation in fluids as well as for environmental applications, in particular, for the enhanced photocatalytic degradation of organic pollutants due to the improved intermixing taking place during the motion of TiO₂ microengines.

Broad-Spectrum Antimicrobial Effects of Photocatalysis Using Titanium Dioxide Nanoparticles Are Strongly Potentiated by Addition of Potassium Iodide

Photocatalysis describes the excitation of titanium dioxide nanoparticles (a wide-band gap semiconductor) by UVA light to produce reactive oxygen species (ROS) that can destroy many organic molecules. This photocatalysis process is used for environmental remediation, while antimicrobial photocatalysis can kill many classes of microorganisms and can be used to sterilize water and surfaces and possibly to treat infections. Here we show that addition of the nontoxic inorganic salt potassium iodide to TiO2 (P25) excited by UVA potentiated the killing of Gram-positive bacteria, Gram-negative bacteria, and fungi by up to 6 logs. The microbial killing depended on the concentration of TiO2, the fluence of UVA light, and the concentration of KI (the best effect was at 100 mM). There was formation of long-lived antimicrobial species (probably hypoiodite and iodine) in the reaction mixture (detected by adding bacteria after light), but short-lived antibacterial reactive species (bacteria present during light) produced more killing. Fluorescent probes for ROS (hydroxyl radical and singlet oxygen) were quenched by iodide. Tri-iodide (which has a peak at 350 nm and a blue product with starch) was produced by TiO2-UVA-KI but was much reduced when methicillin-resistant Staphylococcus aureus (MRSA) cells were also present. The model tyrosine substrate N-acetyl tyrosine ethyl ester was iodinated in a light dose-dependent manner. We conclude that UVA-excited TiO2 in the presence of iodide produces reactive iodine intermediates during illumination that kill microbial cells and long-lived oxidized iodine products that kill after light has ended.

Cu2O loaded titanate nanotube arrays for simultaneously photoelectrochemical ibuprofen oxidation and hydrogen generation

A p-n junction Cu2O doped TiO2 nanotube arrays (Cu2O/TNAs) were synthesized by square wave voltammetry electrochemical (SWVE) deposition method and employed as the working anode. The crystalline, optical properties, surface morphology, and structure of the Cu2O/TNAs were characterized by XRD, UV-vis absorbance edges, SEM, and XPS. Results showed that the Cu2O/TNAs were dominated by anatase phase after sintering at 450 °C with significant visible light response. XPS finding confirmed XRD results that the copper element in Cu2O/TNAs was Cu (I) instead of Cu (II). SEM images illustrated the diameter and the length of supported TiO2 nanotubes was approximately 100 nm and 2.75-4.34 μm, respectively. After Cu2O doping, the nano-tubular structure of TiO2 nanotube kept its integrity with no significant morphological change, which was beneficial for PEC applications. The photocurrent of Cu2O/TNAs was 1.45 times larger than that of TNAs, implying that Cu2O doping significantly enhanced electron mobility by reducing the recombination of electron-hole pairs. In addition, electrochemical impedance spectroscopy (EIS) measurements revealed that the recombination of photogenerated electron-hole pairs was inhibited as the bias potential was applied. Results of Bode plot further demonstrated that the electron lifetime τel of Cu2O/TNAs-20 (30.79 ms), under 0.5 V bias potential, was about 2.23 times higher than that of pure TNAs (13.82 ms). Results of electron spin resonance (ESR) analyses demonstrate that the hydroxyl radicals (OH) are responsible for the PEC decomposition of Ibuprofen.

A comparative study on the efficacy of different probes to predict the photo-activity of nano-titanium dioxide toward biomolecules

A systematic study has been performed to select cell-free tests able to predict the photo-activity of nano-TiO₂ in living organisms.