Collagen scaffolds for tissue engineering

Adhesion, proliferation and differentiation of human mesenchymal stem cell on chitosan/collagen composite scaffold

In vitro tissue engineering requires a progenitor cell source and a porous scaffold providing three dimensional (3D) supports for growth and differentiation to attain tissue architectures. This research focused on fabrication and characterization of 3D porous scaffolds using chitosan (CS), collagen (CG) and chitosan-collagen (CS-CG) composite to investigate their influence on human mesenchymal stem cell (hMSC) adhesion, proliferation and differentiation. Material dependent variations in porous morphology and mechanical behavior of the fabricated CS, CG and CS-CG scaffold showed significant impact on hMSC adhesion, proliferation and differentiation. The maximum hMSC adhesion and proliferation was reported on CS-CG scaffold among all fabricated scaffold groups. Interconnectivity of pores structure in CS-CG scaffold was considered as preferable attribute for such enhanced growth and distribution throughout the scaffold. Besides, CS scaffold with well interconnected pores showed poor adhesion and proliferation because of inadequate adhesion motifs. In case of CG scaffold, optimum growth and distribution of hMSC occurs only at the surface because of the absence of interconnectivity in their pore structures. Likewise, osteogenic differentiation of hMSC occurs most preferably in CS-CG composite scaffold among all scaffold groups. Such enhanced hMSC proliferation and differentiation in CS-CG scaffold significantly influenced on mechanical behavior of scaffold which is essential for in vivo application of a bone tissue implant. Thus CS-CG composite scaffold holds promise to be a suitable platform for in vitro engineering of bone tissue implant.

Scaffold-based tissue engineering approaches in treating infertility

Tissue engineering and the use of scaffolds have shown high therapeutic potentialities about male and female infertility. Nowadays, many couples are suffering from infertility problems. There are different causes for infertility including chemotherapy (for male and female), uterine injuries, and intrauterine adhesions. Extra-cellular matrix in tissue engineering provides a supportive medium for blood or lymphatic vessels making it a suitable substrate for cell implantation and growth. Dominant successes in this branch have been in use of patient-derived primary cells, these cells loaded in scaffolds and used to generate tissue for re-implantation. However, this method has limitations, because of the invasive nature of cell collection, also the cells patient-derived may be not healthy and become the source of disease. Therefore, use of stem cells, including embryonic stem (ES) cells, bone marrow mesenchymal stem cells (BM-MSCs) and umbilical cord-derived mesenchymal stem cells (UC-MSCs) have been considered. Cell/scaffold systems have a substantial role in fertility organs or agents repair or regeneration. This review summarizes the novel scaffold-based tissue engineering approaches to treat infertility.

Development and Biocompatibility of Collagen-Based Composites Enriched with Nanoparticles of Strontium Containing Mesoporous Glass

In the last years bone tissue engineering has been increasingly indicated as a valid solution to meet the challenging requirements for a healthy bone regeneration in case of bone loss or fracture. In such a context, bioactive glasses have already proved their great potential in promoting the regeneration of new bone tissue due to their high bioactivity. In addition, their composition and structure enable us to incorporate and subsequently release therapeutic ions such as strontium, enhancing the osteogenic properties of the material. The incorporation of these inorganic systems in polymeric matrices enables the formulation of composite systems suitable for the design of bone scaffolds or delivery platforms. Among the natural polymers, type I collagen represents the main organic phase of bone and thus is a good candidate to develop biomimetic bioactive systems for bone tissue regeneration. However, alongside the specific composition and structure, the key factor in the design of new biosystems is creating a suitable interaction with cells and the host tissue. In this scenario, the presented study aimed at combining nano-sized mesoporous bioactive glasses produced by means of a sol–gel route with type I collagen in order to develop a bioactive hybrid formulation suitable for bone tissue engineering applications. The designed system has been fully characterized in terms of physico-chemical and morphological analyses and the ability to release Sr²⁺ ions has been studied observing a more sustained profile in presence of the collagenous matrix. With the aim to improve the mechanical and thermal stability of the resulting hybrid system, a chemical crosslinking approach using 4-star poly (ethylene glycol) ether tetrasuccinimidyl glutarate (4-StarPEG) has been explored. The biocompatibility of both non-crosslinked and 4-StarPEG crosslinked systems was evaluated by in vitro tests with human osteoblast-like MG-63 cells. Collected results confirmed the high biocompatibility of composites, showing a good viability and adhesion of cells when cultured onto the biomaterial samples.

Targeted protein delivery: carbodiimide crosslinking influences protein release from microparticles incorporated within collagen scaffolds

Tissue engineering response may be tailored via controlled, sustained release of active agents from protein-loaded degradable microparticles incorporated directly within three-dimensional (3D) ice-templated collagen scaffolds. However, the effects of covalent crosslinking during scaffold preparation on the availability and release of protein from the incorporated microparticles have not been explored. Here, we load 3D ice-templated collagen scaffolds with controlled additions of poly-(DL-lactide-co-glycolide) microparticles. We probe the effects of subsequent N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide hydrochloride crosslinking on protein release, using microparticles with different internal protein distributions. Fluorescein isothiocyanate labelled bovine serum albumin is used as a model protein drug. The scaffolds display a homogeneous microparticle distribution, and a reduction in pore size and percolation diameter with increased microparticle addition, although these values did not fall below those reported as necessary for cell invasion. The protein distribution within the microparticles, near the surface or more deeply located within the microparticles, was important in determining the release profile and effect of crosslinking, as the surface was affected by the carbodiimide crosslinking reaction applied to the scaffold. Crosslinking of microparticles with a high proportion of protein at the surface caused both a reduction and delay in protein release. Protein located within the bulk of the microparticles, was protected from the crosslinking reaction and no delay in the overall release profile was seen.

Breast Reconstruction with a Tissue Engineering and Regenerative Medicine Approach (Systematic Review)

Current techniques for breast reconstruction include an autologous-tissue flap or an implant-based procedure, although both can impose further morbidity. This systematic review aims to explore the existing literature on breast reconstruction using a tissue engineering approach; conducted with the databases Medline and Embase. A total of 28 articles were included, mainly comprising of level-5 evidence with in vitro and animal studies focusing on utilizing scaffolds to support the migration and growth of new tissue; scaffolds can be either biological or synthetic. Biological scaffolds were composed of collagen or a decellularized tissue matrix scaffold. Synthetic scaffolds were primarily composed of polymers with customisable designs, adjusting the internal morphology and pore size. Implanting cells, including adipose-derived stem cells, with combined use of basic fibroblast growth factor has been studied in an attempt to enhance tissue regeneration. Lately, a level-4 evidence human case series was reported; successfully regenerating 210 mL of tissue using an arterio-venous pedicled fat flap within a tissue engineering chamber implanted on the chest wall. Further research is required to evaluate whether the use of cells and other growth factors could adjust the composition of regenerated tissue and improve vascularity; the latter a major limiting factor for creating larger volumes of tissue.

Biomaterials Based on Marine Resources for 3D Bioprinting Applications

Three-dimensional (3D) bioprinting has become a flexible tool in regenerative medicine with potential for various applications. Further development of the new 3D bioprinting field lies in suitable bioink materials with satisfied printability, mechanical integrity, and biocompatibility. Natural polymers from marine resources have been attracting increasing attention in recent years, as they are biologically active and abundant when comparing to polymers from other resources. This review focuses on research and applications of marine biomaterials for 3D bioprinting. Special attention is paid to the mechanisms, material requirements, and applications of commonly used 3D bioprinting technologies based on marine-derived resources. Commonly used marine materials for 3D bioprinting including alginate, carrageenan, chitosan, hyaluronic acid, collagen, and gelatin are also discussed, especially in regards to their advantages and applications.

Combined Treatment with Three Natural Antioxidants Enhances Neuroprotection in a SH-SY5Y 3D Culture Model

Currently, the majority of cell-based studies on neurodegeneration are carried out on two-dimensional cultured cells that do not represent the cells residing in the complex microenvironment of the brain. Recent evidence has suggested that three-dimensional (3D) in vitro microenvironments may better model key features of brain tissues in order to study molecular mechanisms at the base of neurodegeneration. So far, no drugs have been discovered to prevent or halt the progression of neurodegenerative disorders. New therapeutic interventions can come from phytochemicals that have a broad spectrum of biological activities. On this basis, we evaluated the neuroprotective effect of three phytochemicals (sulforaphane, epigallocatechin gallate, and plumbagin) alone or in combination, focusing on their ability to counteract oxidative stress. The combined treatment was found to be more effective than the single treatments. In particular, the combined treatment increased cell viability and reduced glutathione (GSH) levels, upregulated antioxidant enzymes and insulin-degrading enzymes, and downregulated nicotinamide adenine dinucleotide phosphate (NADPH) oxidase 1 and 2 in respect to peroxide-treated cells. Our data suggest that a combination of different phytochemicals could be more effective than a single compound in counteracting neurodegeneration, probably thanks to a pleiotropic mechanism of action.

Collagen multifilament spinning

The benefits of fiber based implants and scaffolds for tissue engineering applications are their anisotropic, highly porous, and controllable macro-, micro-, and nanostructure. Collagen is one of the most commonly used material for the fabrication of scaffolds, as this biopolymer is present in the natural extracellular matrix. For textile processing and textile scaffold fabrication methods, multifilament yarns are required, however, only monofilaments can be generated by state-of-the-art collagen spinning. Hence, the research presented in here aimed at the development of a collagen multifilament wet-spinning process in reproducible quality as well as the characterization of non-crosslinked and crosslinked wet-spun multifilament yarns. Wet spun collagen yarns were comprised of 6 single filaments each having a fineness of 5 tex and a diameter of 80 μm. The tensile strength of the glutaraldehyde crosslinked yarns was 169 MPa (Young's modulus 3534 MPa) in the dry state and 40 MPa (Young's modulus 281 MPa) in the wet state. Furthermore, wet spun collagen filaments showed a characteristic fibrillar structure, which was similar the morphological structure of natural collagen fibers. The textile processing of collagen multifilament yarn was demonstrated by means of knitting technology.

Principles and development of collagen-mediated tissue fusion induced by laser irradiation

The mechanism underlying tissue fusion mediated by laser irradiation remains unclear. We clarify the mechanisms underlying laser-mediated tissue fusion using a novel model. Microscopic examinations of morphological changes within the adventitia of a bovine carotid artery and a collagen sheet prepared from bovine dermis showed collagen fibril bundle loosening and collagen fibre swelling following heating at 46 °C. An incised bovine carotid artery covered with a collagen sheet to which pressure and laser heat of 40 °C–52 °C were applied created a structure that was pressure resistant to >300 mmHg. Microscopic analyses of the irradiation site showed collagen fibril interdigitation. Hence, low-temperature laser-mediated tissue fusion causes collagen fibril bundles to loosen and swell, and crimping causes the fibres to intertwine. As the temperature declines, the loosened and swollen fibrils and fibres tighten, and collagen fibre interdigitation is completed. This technology could be applied to fuse tissues during surgery.

Acoustic modification of collagen hydrogels facilitates cellular remodeling

Developing tunable biomaterials that have the capacity to recreate the physical and biochemical characteristics of native extracellular matrices (ECMs) with spatial fidelity is important for a variety of biomedical, biological, and clinical applications. Several factors have made the ECM protein, collagen I, an attractive biomaterial, including its ease of isolation, low antigenicity and toxicity, and biodegradability. However, current collagen gel formulations fail to recapitulate the range of collagen structures observed in native tissues, presenting a significant challenge in achieving the full potential of collagen-based biomaterials. Collagen fiber structure can be manipulated in vitro through mechanical forces, environmental factors, or thermal mechanisms. Here, we describe a new ultrasound-based fabrication technology that exploits the ability of ultrasound to generate localized mechanical forces to control the collagen fiber microstructure non-invasively. The results indicate that exposing soluble collagen to ultrasound (7.8 or 8.8 MHz; 3.2-10 W/cm2) during hydrogel formation leads to local variations in collagen fiber structure and organization that support increased levels of cell migration. Furthermore, multiphoton imaging revealed increased cell-mediated collagen remodeling of ultrasound-exposed but not sham-exposed hydrogels, including formation of multicellular aggregates, collagen fiber bundle contraction, and increased binding of collagen hybridizing peptides. Skin explant cultures obtained from diabetic mice showed similar enhancement of cell-mediated remodeling of ultrasound-exposed but not sham-exposed collagen hydrogels. Using the mechanical forces associated with ultrasound to induce local changes in collagen fibril structure and organization to functionalize native biomaterials is a promising non-invasive and non-toxic technology for tissue engineering and regenerative medicine.

Immunogenicity analysis of decellularized cardiac scaffolds after transplantation into rats

Aim: Cardiac extracellular matrix (cECM) scaffolds are promising biomaterials for clinical applications. Our aim is to determine the immunogenicity of decellularized scaffolds from different sources for use as artificial organs during organ transplantation. Materials & methods: We transplanted Lewis rats with syngeneic (Lewis rat cECM), allogeneic (BN rat cECM) or xenogeneic (hamster cECM) decellularized cardiac scaffolds. Acute vascular and cellular rejection was quantified by immunohistochemistry and immune cell infiltration. Results: BN rat and hamster hearts were rejected following transplantation. BN and hamster cECMs had similarly low immunogenicity compared with Lewis rat cECMs and did not lead to increased rejection. Conclusion: We found that scaffolds from all sources did not induce vascular or cellular rejection and exhibited low immunogenicity.

Photoactivatable Hsp47: A Tool to Regulate Collagen Secretion and Assembly

Collagen is the most abundant structural protein in mammals and is crucial for the mechanical integrity of tissues. Hsp47, an endoplasmic reticulum resident collagen-specific chaperone, is involved in collagen biosynthesis and plays a fundamental role in the folding, stability, and intracellular transport of procollagen triple helices. This work reports on a photoactivatable derivative of Hsp47 that allows regulation of collagen biosynthesis within mammalian cells using light. Photoactivatable Hsp47 contains a non-natural light-responsive tyrosine (o-nitro benzyl tyrosine (ONBY)) at Tyr383 position of the protein sequence. This mutation renders Hsp47 inactive toward collagen binding. The inactive, photoactivatable protein is easily uptaken by cells within a few minutes of incubation, and accumulated at the endoplasmic reticulum via retrograde KDEL receptor-mediated uptake. Upon light exposure, the photoactivatable Hsp47 turns into functional Hsp47 in situ. The increased intracellular concentration of Hsp47 results in stimulated secretion of collagen. The ability to promote collagen synthesis on demand, with spatiotemporal resolution, and in diseased state cells is demonstrated in vitro. It is envisioned that photoactivatable Hsp47 allows unprecedented fundamental studies of collagen biosynthesis, matrix biology, and inspires new therapeutic concepts in biomedicine and tissue regeneration.

Thermally-controlled extrusion-based bioprinting of collagen

Thermally-crosslinked hydrogels in bioprinting have gained increasing attention due to their ability to undergo tunable crosslinking by modulating the temperature and time of crosslinking. In this paper, we present a new bioink composed of collagen type-I and Pluronic® F-127 hydrogels, which was bioprinted using a thermally-controlled bioprinting unit. Bioprintability and rheology of the composite bioink was studied in a thorough manner in order to determine the optimal bioprinting time and extrusion profile of the bioink for fabrication of three-dimensional (3D) constructs, respectively. It was observed that collagen fibers aligned themselves along the directions of the printed filaments after bioprinting based on the results on an anisotropy study. Furthermore, rat bone marrow-derived stem cells (rBMSCs) were bioprinted in order to determine the effect of thermally-controlled extrusion process. In vitro viability and proliferation study revealed that rBMSCs were able to maintain their viability after extrusion and attached to collagen fibers, spread and proliferated within the constructs up to seven days of culture.

Electrobiofabrication: electrically based fabrication with biologically derived materials

While conventional material fabrication methods focus on form and strength to achieve function, the fabrication of material systems for emerging life science applications will need to satisfy a more subtle set of requirements. A common goal for biofabrication is to recapitulate complex biological contexts (e.g. tissue) for applications that range from animal-on-a-chip to regenerative medicine. In these cases, the material systems will need to: (i) present appropriate surface functionalities over a hierarchy of length scales (e.g. molecular features that enable cell adhesion and topographical features that guide differentiation); (ii) provide a suite of mechanobiological cues that promote the emergence of native-like tissue form and function; and (iii) organize structure to control cellular ingress and molecular transport, to enable the development of an interconnected cellular community that is engaged in cell signaling. And these requirements are not likely to be static but will vary over time and space, which will require capabilities of the material systems to dynamically respond, adapt, heal and reconfigure. Here, we review recent advances in the use of electrically based fabrication methods to build material systems from biological macromolecules (e.g. chitosan, alginate, collagen and silk). Electrical signals are especially convenient for fabrication because they can be controllably imposed to promote the electrophoresis, alignment, self-assembly and functionalization of macromolecules to generate hierarchically organized material systems. Importantly, this electrically based fabrication with biologically derived materials (i.e. electrobiofabrication) is complementary to existing methods (photolithographic and printing), and enables access to the biotechnology toolbox (e.g. enzymatic-assembly and protein engineering, and gene expression) to offer exquisite control of structure and function. We envision that electrobiofabrication will emerge as an important platform technology for organizing soft matter into dynamic material systems that mimic biology's complexity of structure and versatility of function.

Sinapic acid-loaded chitosan nanoparticles in polycaprolactone electrospun fibers for bone regeneration in vitro and in vivo

Sinapic acid (SA) is a plant-derived phenolic compound known for its multiple biological properties, but its role in the promotion of bone formation is not yet well-studied. Moreover, the delivery of SA is hindered by its complex hydrophobic nature, limiting its bioavailability. In this study, we fabricated a drug delivery system using chitosan nanoparticles (nCS) loaded with SA at different concentrations. These were incorporated into polycaprolactone (PCL) fibers via an electrospinning method. nCS loaded with 50 μM SA in PCL fibers promoted osteoblast differentiation. Furthermore, SA treatment activated the osteogenesis signaling pathways in mouse mesenchymal stem cells. A critical-sized rat calvarial bone defect model system identified that the inclusion of SA into PCL/nCS fibers accelerated bone formation. Collectively, these data suggest that SA promoted osteoblast differentiation in vitro and bone formation in vivo, possibly by activating the TGF-β1/BMP/Smads/Runx2 signaling pathways, suggesting SA might have therapeutic benefits in bone regeneration.

In Vitro Cultivation of Limbal Epithelial Stem Cells on Surface-Modified Crosslinked Collagen Scaffolds

PURPOSE

To investigate the efficacy of recombinant human collagen type I (RHC I) and collagen-like peptide (CLP) hydrogels as alternative carrier substrates for the cultivation of limbal epithelial stem cells (LESC) under xeno-free culture conditions.

METHODS

Human LESC were cultivated on seven different collagen-derived hydrogels: (1) unmodified RHC I, (2) fibronectin-patterned RHC I, (3) carbodiimide-crosslinked CLP (CLP-12 EDC), (4) DMTMM- (4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-methyl-morpholinium-) crosslinked CLP (CLP-12), (5) fibronectin-patterned CLP-12, (6) "3D limbal niche-mimicking" CLP-12, and (7) DMTMM-crosslinked CLP made from higher CLP concentration solution. Cell proliferation, cell morphology, and expression of LESC markers were analyzed. All data were compared to cultures on human amniotic membrane (HAM).

RESULTS

Human LESC were successfully cultivated on six out of seven hydrogel formulations, with primary cell cultures on CLP-12 EDC being deemed unsuccessful since the area of outgrowth did not meet quality standards (i.e., inconsistence in outgrowth and confluence) after 14 days of culture. Upon confluence, primary LESC showed high expression of the stem cell marker ΔNp63, proliferation marker cytokeratin (KRT) 14, adhesion markers integrin-β4 and E-cadherin, and LESC-specific extracellular matrix proteins laminin-α1, and collagen type IV. Cells showed low expression of differentiation markers KRT3 and desmoglein 3 (DSG3). Significantly higher gene expression of KRT3 was observed for cells cultured on CLP hydrogels compared to RHC I and HAM. Surface patterning of hydrogels influenced the pattern of proliferation but had no significant effect on the phenotype or genotype of cultures. Overall, the performance of RHC I and DMTMM-crosslinked CLP hydrogels was equivalent to that of HAM.

CONCLUSION

RHC I and DMTMM-crosslinked CLP hydrogels, irrespective of surface modification, support successful cultivation of primary human LESC using a xeno-free cultivation protocol. The regenerated epithelium maintained similar characteristics to HAM-based cultures.

Engineering human ventricular heart tissue based on macroporous iron oxide scaffolds

Myocardial infarction (MI) is a primary cardiovascular disease threatening human health and quality of life worldwide. The development of engineered heart tissues (EHTs) as a transplantable artificial myocardium provides a promising therapy for MI. Since most MIs occur at the ventricle, engineering ventricular-specific myocardium is therefore more desirable for future applications. Here, by combining a new macroporous 3D iron oxide scaffold (IOS) with a fixed ratio of human pluripotent stem cell (hPSC)-derived ventricular-specific cardiomyocytes and human umbilical cord-derived mesenchymal stem cells, we constructed a new type of engineered human ventricular-specific heart tissue (EhVHT). The EhVHT promoted expression of cardiac-specific genes, ion exchange, and exhibited a better Ca²⁺ handling behaviors and normal electrophysiological activity in vitro. Furthermore, when patched on the infarcted area, the EhVHT effectively promoted repair of heart tissues in vivo and facilitated the restoration of damaged heart function of rats with acute MI. Our results show that it is feasible to generate functional human ventricular heart tissue based on hPSC-derived ventricular myocytes for the treatment of ventricular-specific myocardium damage. STATEMENT OF SIGNIFICANCE: We successfully generated highly purified homogenous human ventricular myocytes and developed a method to generate human ventricular-specific heart tissue (EhVHT) based on three-dimensional iron oxide scaffolds. The EhVHT promoted expression of cardiac-specific genes, ion exchange, and exhibited a better Ca²⁺ handling behaviors and normal electrophysiological activity in vitro. Patching the EhVHT on the infarct area significantly improved cardiac function in rat acute MI models. This EhVHT has a great potential to meet the specific requirements for ventricular damages in most MI cases and for screening drugs specifically targeting ventricular myocardium.

Tissue Engineering in Pediatric Bladder Reconstruction-The Road to Success

Several congenital disorders can cause end stage bladder disease and possibly renal damage in children. The current gold standard therapy is enterocystoplasty, a bladder augmentation using an intestinal segment. However, the use of bowel tissue is associated with numerous complications such as metabolic disturbance, stone formation, urine leakage, chronic infections, and malignancy. Urinary diversions using engineered bladder tissue would obviate the need for bowel for bladder reconstruction. Despite impressive progress in the field of bladder tissue engineering over the past decades, the successful transfer of the approach into clinical routine still represents a major challenge. In this review, we discuss major achievements and challenges in bladder tissue regeneration with a focus on different strategies to overcome the obstacles and to meet the need for living functional tissue replacements with a good growth potential and a long life span matching the pediatric population.

Evaluation of epigallocatechin-3-gallate (EGCG)-modified scaffold determines macrophage recruitment

Biomaterials based on the modulation of macrophages have gained increased attention recently. Macrophages are generally divided into the pro-inflammatory M1 and pro-regenerative M2 phenotypes. Macrophages play a pivotal role in bone regeneration by regulating osteoblast differentiation and secreting pro-regenerative factors. In the present study, epigallocatechin-3-gallate (EGCG)-modified collagen membranes downregulated the expression of inflammatory factors and promoted the recruitment of M2 macrophages, as evidenced by the expression of M2 macrophage markers (CD163 and CD206). It is further demonstrated that the recruitment of M2 macrophages may be involved with CC chemokine receptor type 2 (CCR2) signaling, with a significant downregulation of CD206 following CCR2 knockout. These results suggested that EGCG-modified collagen membranes may modulate the recruitment of macrophages and can be applied to guided bone regeneration and guided tissue regeneration.

Engineering Biomimetic Materials for Skeletal Muscle Repair and Regeneration

Although skeletal muscle is highly regenerative following injury or disease, endogenous self-regeneration is severely impaired in conditions of volume traumatic muscle loss. Consequently, tissue engineering approaches are a promising means to regenerate skeletal muscle. Biological scaffolds serve as not only structural support for the promotion of cellular ingrowth but also impart potent modulatory signaling cues that may be beneficial for tissue regeneration. In this work, the progress of tissue engineering approaches for skeletal muscle engineering and regeneration is overviewed, with a focus on the techniques to create biomimetic engineered tissue using extracellular cues. These factors include mechanical and electrical stimulation, geometric patterning, and delivery of growth factors or other bioactive molecules. The progress of evaluating the therapeutic efficacy of these approaches in preclinical models of muscle injury is further discussed.

A Pyk2 inhibitor incorporated into a PEGDA-gelatin hydrogel promotes osteoblast activity and mineral deposition

Pyk2 is a non-receptor tyrosine kinase that belongs to the family of focal adhesion kinases. Studies from our laboratory and others demonstrated that mice lacking the Pyk2 gene (Ptk2B) have high bone mass, which was due to increased osteoblast activity, as well as decreased osteoclast activity. It was previously reported that a chemical inhibitor that targets both Pyk2 and its homolog FAK, led to increased bone formation in ovariectomized rats. In the current study, we developed a hydrogel containing poly(ethylene glycol) diacrylate (PEGDA) and gelatin which was curable by visible-light and was suitable for the delivery of small molecules, including a Pyk2-targeted chemical inhibitor. We characterized several critical properties of the hydrogel, including viscosity, gelation time, swelling, degradation, and drug release behavior. We found that a hydrogel composed of PEGDA1000 plus 10% gelatin (P1000:G10) exhibited Bingham fluid behavior that can resist free flowing before in situ polymerization, making it suitable for use as an injectable carrier in open wound applications. The P1000:G10 hydrogel was cytocompatible and displayed a more delayed drug release behavior than other hydrogels we tested. Importantly, the Pyk2-inhibitor-hydrogel retained its inhibitory activity against the Pyk2 tyrosine kinase, and promoted osteoblast activity and mineral deposition in vitro. Overall, our findings suggest that a Pyk2-inhibitor based hydrogel may be suitable for the treatment of craniofacial and appendicular skeletal defects and targeted bone regeneration.

One-Step Labeling of Collagen Hydrogels with Polydopamine and Manganese Porphyrin for Non-Invasive Scaffold Tracking on Magnetic Resonance Imaging

Biomaterial scaffolds are the cornerstone to supporting 3D tissue growth. Optimized scaffold design is critical to successful regeneration, and this optimization requires accurate knowledge of the scaffold's interaction with living tissue in the dynamic in vivo milieu. Unfortunately, non-invasive methods that can probe scaffolds in the intact living subject are largely underexplored, with imaging-based assessment relying on either imaging cells seeded on the scaffold or imaging scaffolds that have been chemically altered. In this work, the authors develop a broadly applicable magnetic resonance imaging (MRI) method to image scaffolds directly. A positive-contrast "bright" manganese porphyrin (MnP) agent for labeling scaffolds is used to achieve high sensitivity and specificity, and polydopamine, a biologically derived universal adhesive, is employed for adhering the MnP. The technique was optimized in vitro on a prototypic collagen gel, and in vivo assessment was performed in rats. The results demonstrate superior in vivo scaffold visualization and the potential for quantitative tracking of degradation over time. Designed with ease of synthesis in mind and general applicability for the continuing expansion of available biomaterials, the proposed method will allow tissue engineers to assess and fine-tune the in vivo behavior of their scaffolds for optimal regeneration.

A Collagen and Silk Scaffold for Improved Healing of the Tendon and Bone Interface in a Rabbit Model

Background

The study aimed to develop a novel orthopedic surgical scaffold made of collagen and silk to repair the tendon and bone interface, and to investigate its influence on tendon and bone healing in a rabbit model.

Material/Methods

Four types of surgical scaffold were prepared, including a random collagen scaffold (RCS), an aligned collagen scaffold (ACS), a random collagen scaffold combined with knitted silk (RCSS), and an aligned collagen scaffold combined with knitted silk (ACSS). Rabbit bone marrow stem cells (BMSCs) were cultured and seeded onto the RCS and ACS scaffold. The animal model included four-month-old female New Zealand White rabbits (N=20) that underwent drilling into the rotator cuff of the left supraspinatus muscle tendon, randomized into the ACSS and RCSS groups.

Results

Rabbit BMSCs adhered to and proliferated on the RCS and ACS in vitro. Transcription levels of the COL I, COL III, and tenascin (TCN) genes were significantly increased in the ACS group compared with the RCS group. Transcription levels of COL I, runt-related transcription factor-2 (RUNX-2) and bone morphogenetic protein-2 (BMP-2) were significantly increased in the RCS group compared with the ACS group. RCSS and ACSS implanted in the rabbit models for eight weeks resulted in more regenerative tissue in the RCSS group compared with the ACSS group, with new cartilage at the tendon and bone interface at 12 weeks.

Conclusions

A collagen and silk scaffold improved healing of the tendon and bone interface in a rabbit model.

Production and Characterization of Chemically Cross-Linked Collagen Scaffolds

Chemical cross-linking of collagen-based devices is used as a means of increasing the mechanical stability and control the degradation rate upon implantation. Herein, we describe techniques to produce cross-linked with glutaraldehyde (GTA; amine terminal cross-linker), 4-arm polyethylene glycol succinimidyl glutarate (4SP; amine terminal cross-linker), diphenyl phosphoryl azide (DPPA; carboxyl terminal cross-linker), and 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC; carboxyl terminal cross-linker) collagen films. In addition, we provide protocols to characterize the biophysical (swelling), biomechanical (tensile), and biological (metabolic activity, proliferation and viability using human dermal fibroblasts and THP-1 macrophages) properties of the cross-linked collagen scaffolds.

A cancellous bone matrix system with specific mineralisation degrees for mesenchymal stem cell differentiation and bone regeneration

Bone regenerative therapies have been explored using various biomaterial systems.

Light Absorptive Properties of Articular Cartilage, ECM Molecules, Synovial Fluid, and Photoinitiators as Potential Barriers to Light-Initiated Polymer Scaffolding Procedures

OBJECTIVE

Many in vivo procedures to repair chondral defects use ultraviolet (UV)-photoinitiated in situ polymerization within the cartilage matrix. Chemical species that absorb UV light might reduce the effectiveness of these procedures by acting as light absorption barriers. This study evaluated whether any of the individual native biochemical components in cartilage and synovial fluid interfered with the absorption of light by common scaffolding photosensitizers.

MATERIALS

UV-visible spectroscopy was performed on each major component of cartilage in solution, on bovine synovial fluid, and on four photosensitizers, riboflavin, Irgacure 2959, quinine, and riboflavin-5'-phosphate. Molar extinction and absorption coefficients were calculated at wavelengths of maximum absorbance and 365 nm. Intact articular cartilage was also examined.

RESULTS

The individual major biochemical components of cartilage, Irgacure 2959, and quinine did not exhibit a significant absorption at 365 nm. Riboflavin and riboflavin-5'-phosphate were more effectual light absorbers at 365 nm, compared with the individual native species. Intact cartilage absorbed a significantly greater amount of UV light in comparison with the native species.

CONCLUSION

Our results indicate that none of the individual native species in cartilage will interfere with the absorption of UV light at 365 nm by these commonly used photoinitiators. Intact cartilage slices exhibited significant light absorption at 365 nm, while also having distinct absorbance peaks at wavelengths less than 300 nm. Determining the UV absorptive properties of the biomolecules native to articular cartilage and synovial fluid will aid in optimizing scaffolding procedures to ensure sufficient scaffold polymerization at a minimum UV intensity.

Efficiency of coculture with angiogenic cells or physiological BMP-2 administration on improving osteogenic differentiation and bone formation of MSCs

Cell-based bone regeneration with mesenchymal stem cells (MSCs) represents the current challenge toward repair of bone defects and fractures. The supposed hurdles for satisfactory performance of cell-based constructs include inadequate vascularization and osteogenic signals. Considering the reported beneficial role of angiogenic cells in promoting vascularization and osteogenic differentiation and the osteogenic potential of bone morphogenetic protein 2 (BMP-2), we here evaluated the efficiency of coculture with angiogenic cells or a physiological dose of BMP-2 on improving osteogenic differentiation of MSCs and bone formation in vivo. In three dimensional (3D) collagen hydrogels in vitro, cocultured human umbilical vein endothelial cells (HUVECs) in a 1:1 ratio or with a physiological dose of BMP-2 (2 ng/μL) promoted the osteogenic potential of MSCs evidenced by enhanced alkaline phosphatase activity and gene expression of osteogenic markers. Notably, HUVECs evoked similar osteogenic stimulation as BMP-2, albeit in a delayed manner. When their bone formation capacity was further evaluated in a mouse subcutaneous implantation model, MSCs with BMP-2 demonstrated the highest efficiency with reproducible bone formation. In contrast, MSCs cocultured with HUVECs constructs displayed substantial blood vessel-like structures with fibrous tissue rather than ectopic bone as MSC monoculture controls. Our findings confirm the priority of generating cell-based bone constructs with physiological BMP-2 administration and indicate the potential of using angiogenic cells to develop vascularized constructs. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 643-653, 2019.

Aqueous Two-Phase Emulsion Bioink-Enabled 3D Bioprinting of Porous Hydrogels

3D bioprinting technology provides programmable and customizable platforms to engineer cell-laden constructs mimicking human tissues for a wide range of biomedical applications. However, the encapsulated cells are often restricted in spreading and proliferation by dense biomaterial networks from gelation of bioinks. Herein, a cell-benign approach is reported to directly bioprint porous-structured hydrogel constructs by using an aqueous two-phase emulsion bioink. The bioink, which contains two immiscible aqueous phases of cell/gelatin methacryloyl (GelMA) mixture and poly(ethylene oxide) (PEO), is photocrosslinked to fabricate predesigned cell-laden hydrogel constructs by extrusion bioprinting or digital micromirror device-based stereolithographic bioprinting. The porous structure of the 3D-bioprinted hydrogel construct is formed by subsequently removing the PEO phase from the photocrosslinked GelMA hydrogel. Three different cell types (human hepatocellular carcinoma cells, human umbilical vein endothelial cells, and NIH/3T3 mouse embryonic fibroblasts) within the 3D-bioprinted porous hydrogel patterns show enhanced cell viability, spreading, and proliferation compared to the standard (i.e., nonporous) hydrogel constructs. The 3D bioprinting strategy is believed to provide a robust and versatile platform to engineer porous-structured tissue constructs and their models for a variety of applications in tissue engineering, regenerative medicine, drug development, and personalized therapeutics.

Novel decellularized animal conchal cartilage graft for application in human patient

Restoration of the external ear and nose in human patients, in either congenital deformity or acquired defects, is a challenge in reconstructive surgery. Optimization of the currently available materials is necessary for rhinoplasty and microtia correction to avoid intraoperative manoeuvring and early rejection. The aim of this study was to develop cross-linked decellularized caprine conchal cartilages as biocompatible, robust, and non-toxic matrix template. The characterization of the decellularized tissue encompasses in vitro lymphoproliferation assay, cytotoxicity test, agar gel precipitation test, in vivo immunocompatibility study, histology, and determination of pro-inflammatory cytokines in animal model. Decellularized cartilage was implanted in human volunteer at R. G. Kar Medical College and Hospital, Kolkata, India, and samples were assessed histologically by retrieving those after 4 months. The processed cartilages were implanted in rhinoplasty (nine) and microtia patients (six) keeping autogenous cartilage graft as control up to 18 months after surgery. Primary outcomes were viability and safety of the material, both in animal model and human pre-application in actual site. Secondary outcomes included self-assessed clinical findings on gross examination. This study is under the ethical approval no. RKC/14 dated January 27, 2012. The in vitro cellular reactivity was less in processed cartilage protein than control. Histology of retrieved tissues in animal model and human volunteer showed no adverse reactions. Production of IL-2, IL-6, and TNF-α cytokines was lower at 4 weeks. The rhinoplasty and microtia operation in clinical patients utilizing the processed cartilage showed satisfactory recovery with improved facial look. These low cost, easily available, biocompatible, safe xenocartilage biomatrices of caprine conchal cartilage origin are very flexible in shape and size, enabling them as potential bioimplant for repair of nasal and auricular structure without any rejection or diverse biomedical applications.

Fabrication and characterization of collagen–hydroxyapatite-based composite scaffolds containing doxycycline via freeze-casting method for bone tissue engineering

In this study, hydroxyapatite nanoparticles containing 10% doxycycline, a structural isomer of tetracycline, was prepared by the co-precipitation method. It was added to collagen solution for the preparation of the scaffold with freeze-casting method in order to develop a composite scaffold with both antibacterial and osteoinductive properties for repairing bone defects. The scaffolds were evaluated regarding their morphology, porosity, degradation and cellular response. The scaffolds for further investigation were added in a rat calvaria defect model. The study showed that after eight weeks, the bone formation was relatively higher in the collagen/nano-hydroxyapatite/doxycycline group with completely filled defect when compared with other groups. Histopathological evaluation showed that the defect in the collagen/nano-hydroxyapatite/doxycycline group was fully replaced by the new bone and connective tissue. Our results provide evidence supporting the possible applicability of doxycycline-containing scaffolds for successful bone regeneration.

Porcine Breast Extracellular Matrix Hydrogel for Spatial Tissue Culture

Porcine mammary fatty tissues represent an abundant source of natural biomaterial for generation of breast-specific extracellular matrix (ECM). Here we report the extraction of total ECM proteins from pig breast fatty tissues, the fabrication of hydrogel and porous scaffolds from the extracted ECM proteins, the structural properties of the scaffolds (tissue matrix scaffold, TMS), and the applications of the hydrogel in human mammary epithelial cell spatial cultures for cell surface receptor expression, metabolomics characterization, acini formation, proliferation, migration between different scaffolding compartments, and in vivo tumor formation. This model system provides an additional option for studying human breast diseases such as breast cancer.

Photo-Crosslinked Keratin/Chitosan Membranes as Potential Wound Dressing Materials

In this study, we combined two kinds of natural polymers, chitosan and keratin, to develop a portable composite membrane via UV irradiation. UV-crosslinking without an additional chemical agent makes the fabrication more ideal by reducing reactants and avoiding residual toxic chemicals. This novel composite could perform synergistic functions benefitting from chitosan and keratin; including a strong mechanical strength, biodegradability, biocompatibility, better cell adhesion, and proliferation characteristics. Furthermore, compared with our previous research, this keratin-chitosan composite membrane was improved in that it was made to be portable, enabling it to be versatile and have various applications in vitro and in vivo. Based on these facts, this innovative composite membrane has high potential for serving as an outstanding candidate for wound healing or other biomedical applications.

Poly(ε-caprolactone)/Hydroxyapatite 3D Honeycomb Scaffolds for a Cellular Microenvironment Adapted to Maxillofacial Bone Reconstruction

The elaboration of biomimetic materials inspired from the specific structure of native bone is one the main goal of tissue engineering approaches. To offer the most appropriate environment for bone reconstruction, we combined electrospinning and electrospraying to elaborate an innovative scaffold composed of alternating layers of polycaprolactone (PCL) and hydroxyapatite (HA). In our approach, the electrospun PCL was shaped into a honeycomb-like structure with an inner diameter of 160 μm, capable of providing bone cells with a 3D environment while ensuring the material biomechanical strength. After 5 days of culture without any differentiation factor, the murine embryonic cell line demonstrated excellent cell viability on contact with the PCL-HA structures as well as active colonization of the scaffold. The cell differentiation, as tested by RT-qPCR, revealed a 6-fold increase in the expression of the RNA of the Bglap involved in bone mineralization as compared to a classical 2D culture. This differentiation of the cells into osteoblasts was confirmed by alkaline phosphatase staining of the scaffold cultivated with the cell lineage. Later on, organotypic cultures of embryonic bone tissues showed the high capacity of the PCL-HA honeycomb structure to guide the migration of differentiated bone cells throughout the cavities and the ridge of the biomaterial, with a colonization surface twice as big as that of the control. Taken together, our results indicate that PCL-HA honeycomb structures are biomimetic supports that promotes in vitro osteocompatibility, osteoconduction, and osteoinduction and could be suitable for being used for bone reconstruction in complex situations such as the repair of maxillofacial defects.

Injectable hydrogels: a new paradigm for osteochondral tissue engineering

Osteochondral tissue engineering has become a promising strategy for repairing focal chondral lesions and early osteoarthritis (OA), which account for progressive joint pain and disability in millions of people worldwide. Towards improving osteochondral tissue repair, injectable hydrogels have emerged as promising matrices due to their wider range of properties such as their high water content and porous framework, similarity to the natural extracellular matrix (ECM), ability to encapsulate cells within the matrix and ability to provide biological cues for cellular differentiation. Further, their properties such as those that facilitate minimally invasive deployment or delivery, and their ability to repair geometrically complex irregular defects have been critical for their success. In this review, we provide an overview of innovative approaches to engineer injectable hydrogels towards improved osteochondral tissue repair. Herein, we focus on understanding the biology of osteochondral tissue and osteoarthritis along with the need for injectable hydrogels in osteochondral tissue engineering. Furthermore, we discuss in detail different biomaterials (natural and synthetic) and various advanced fabrication methods being employed for the development of injectable hydrogels in osteochondral repair. In addition, in vitro and in vivo applications of developed injectable hydrogels for osteochondral tissue engineering are also reviewed. Finally, conclusions and future perspectives of using injectable hydrogels in osteochondral tissue engineering are provided.

A collagen based cryogel bioscaffold coated with nanostructured polydopamine as a platform for mesenchymal stem cell therapy

Cryo-hydrogels (cryogels) are polymer hydrogels formed at sub-zero temperatures. Bioscaffolds created from cryogels have interconnected macropores which allow for cell migration, tissue-ingrowth, unhindered diffusion of solutes and mass transport of therapeutics. In this study, we developed collagen based cryogel bioscaffolds and coated them with polydopamine using a simple two-step technique. Cryogel bioscaffolds were synthesized by collagen crosslinking at -20°C and exhibited a macroporous interconnected architecture with 75% ± 3% porosity. Two groups of pore sizes were observed: 300 ± 50 µm and 30 ± 10 µm in diameter. The addition of a polydopamine coating to cryogel bioscaffolds was confirmed using composition analysis. This resulted in a 41% ± 5% decrease in water uptake, 81% ± 10% decrease in swelling rate and 12% ± 3% decrease in their degree of dissolution (p < 0.05), with a 48% ± 2% increase in stiffness and 57% ± 5% increase in compressive strength (p < 0.05). Seeding adipose tissue-derived mesenchymal stem cells (AD-MSCs) into polydopamine coated-cryogel bioscaffolds resulted in cells demonstrating a 52% ± 4% increase in viability and 33% ± 3% increase in proliferation when compared to AD-MSCs seeded into uncoated-cryogel bioscaffolds (p < 0.05). In summary, our novel polydopamine coated-cryogel bioscaffold represents an efficient and low-cost bioscaffold platform to support MSC therapies. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 2213-2228, 2018.

Hydroxyapatite nanowire/collagen elastic porous nanocomposite and its enhanced performance in bone defect repair

The synthetic bone grafts that mimic the composition and structure of human natural bone exhibit great potential for application in bone defect repair. In this study, a biomimetic porous nanocomposite consisting of ultralong hydroxyapatite nanowires (UHANWs) and collagen (Col) with 66.7 wt% UHANWs has been prepared by the freeze drying process and subsequent chemical crosslinking. Compared with the pure collagen as a control sample, the biomimetic UHANWs/Col porous nanocomposite exhibits significantly improved mechanical properties. More significantly, the rehydrated UHANWs/Col nanocomposite exhibits an excellent elastic behavior. Moreover, the biomimetic UHANWs/Col porous nanocomposite has a good degradable performance with a sustained release of Ca and P elements, and can promote the adhesion and spreading of mesenchymal stem cells. The in vivo evaluation reveals that the biomimetic UHANWs/Col porous nanocomposite can significantly enhance bone regeneration compared with the pure collagen sample. After 12 weeks implantation, the woven bone and lamellar bone are formed throughout the entire UHANWs/Col porous nanocomposite, and connect directly with the host bone to construct a relatively normal bone marrow cavity, leading to successful osteointegration and bone reconstruction. The as-prepared biomimetic UHANWs/Col porous nanocomposite is promising for applications in various fields such as bone defect repair.