Stabilization of short collagen-like triple helices by protein engineering

The chain register in heterotrimeric collagen peptides affects triple helix stability and folding kinetics

Collagen type IV is a highly specialized form of collagen found only in basement membranes, where it provides mechanical stability and structural integrity to tissues and organs, and binding sites for cell adhesion. In its ubiquitous form, collagen type IV consists of two alpha1 chains and one alpha2 chain, whose internal alignment within the triple helix seems to exert a strong influence on the binding affinity to alpha1beta1 integrin receptor. This has been assessed recently using two synthetic collagen peptides that contain the cell adhesion epitope of collagen type IV and are assembled into the most plausible alpha1alpha2alpha1' and alpha2alpha1alpha1' registers. In the present study, the effects of the chain register on the stability of the triple helix and the folding kinetics of these collagen peptides were investigated by CD spectroscopy and microcalorimetry. The results revealed a multi-domain structural organization for both trimers, with an unexpected strong effect of the chain alignment on the conformational stability. Molecular dynamics simulations served to rationalize more properly the experimental results.

Type I collagen contains at least 14 cryptic fibronectin binding sites of similar affinity

There is uncertainty in the literature regarding the number and location of fibronectin binding sites on denatured collagen. Although most attention has focused on a single site near the collagenase-sensitive region of each alpha chain, there is evidence for additional sites in other regions. We treated bovine type I collagen with cyanogen bromide, labeled the resulting mixture with fluorescein, and separated the peptides by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Fluorescent bands were excised from the gel and dialyzed exhaustively to remove detergent. Titration of eight distinct fluorescent-labeled fragments with the 42-kDa gelatin-binding fragment of fibronectin caused increases in anisotropy that were fully reversible with unlabeled gelatin. By fitting the dose responses it was possible to calculate apparent K(d)'s whose values ranged between 1 and 4 microM. The largest fragment, alpha(2)-CB3,5, composing about 2/3 of the alpha(2) chain, when further digested with endoproteinase Lys-C, yielded at least three additional subfragments that also bound with similar affinities. Thus, there appear to be at least 14 distinct fibronectin binding sites of similar affinity in bovine type I collagen, five on each of the alpha(1) chains and four on the alpha(2) chain. Experiments with several synthetic peptides failed to reveal the exact nature of the binding site.

Trimerization of the amino propeptide of type IIA procollagen using a 14-amino acid sequence derived from the coiled-coil neck domain of surfactant protein D

The folding of a collagen triple helix usually requires the presence of additional sequences that contribute to the association and correct alignment of the collagen chains. We recently reported that the C-terminal neck and lectin domains of a collagenous C-type lectin, rat pulmonary surfactant protein D (SP-D), are sufficient to drive the trimerization of a heterologous type IIA procollagen amino propeptide sequence. However, the conformation of the resulting trimeric IIA propeptide and the specific contributions of the SP-D sequence to trimerization were not elucidated. In the present study, we show that trimerization of the fusion protein is associated with correct folding of the collagen helix within the IIA propeptide domain (as assessed by circular dichroism) and that the constituent chains are hydroxylated. Chemical cross-linking and analytical ultracentrifugation showed that the IIA amino-propeptide retains its trimeric configuration even after proteolytic removal of the SP-D domains. By contrast, IIA amino-propeptides synthesized without fusion to the neck or lectin domains are assembled exclusively as monomers. To localize the trimerization sequence, mutant chimeric cDNA constructs were designed containing premature termination codons within the coiled-coil neck domain. A short, 14-amino acid sequence corresponding to the first two heptad repeats of the neck domain was sufficient to drive the trimeric association of the IIA amino-propeptide alpha-chains. However, deletion of the collagen domain resulted in the secretion of monomers. These studies demonstrate that two heptad repeats are sufficient for trimeric association of the propeptide but indicate that cooperative interactions between the coiled-coil and collagen domains are required for the formation of a stable helix.

Understanding the role of stereoelectronic effects in determining collagen stability. 2. A quantum mechanical/molecular mechanical study of (Proline-Proline-Glycine)(n) polypeptides

The importance of vicinal and long-range interresidue effects in determining the stability of the collagen triple helix has been investigated by quantum mechanical (QM) and molecular mechanical (MM) computations on suitable model polypeptides, taking into account solvent effects by the polarizable continuum model (PCM). At the QM level, the PII conformation corresponds to an energy minimum for pentapeptide analogues incorporating the sequence Gly-Pro-Pro-Gly, irrespective of the down or up puckering of the pyrrolidine ring. However, our computations indicate that the alternation of down and up prolines characterizing collagen and collagen-like peptides is not due to an intrinsic preference of the Pro-Pro-Gly sequence. This result is confirmed by MM computations of longer polypeptides. Next, MM computations on model triple helices show that a better packing is obtained for specific values of backbone dihedrals, which, in turn, favor the alternation of down and up prolines along each chain.

Highly stable trimers formed by human immunodeficiency virus type 1 envelope glycoproteins fused with the trimeric motif of T4 bacteriophage fibritin

The envelope glycoproteins of human immunodeficiency virus type 1 (HIV-1) function as a trimer composed of three gp120 exterior glycoproteins and three gp41 transmembrane proteins. Soluble gp140 glycoproteins composed of the uncleaved ectodomains of gp120 and gp41 form unstable, heterogeneous oligomers, but soluble gp140 trimers can be stabilized by fusion with a C-terminal, trimeric GCN4 motif (X. Yang et al., J. Virol. 74:5716-5725, 2000). To understand the influence of the C-terminal trimerization domain on the properties of soluble HIV-1 envelope glycoprotein trimers, uncleaved, soluble gp140 glycoproteins were stabilized by fusion with another trimeric motif derived from T4 bacteriophage fibritin. The fibritin construct was more stable to heat and reducing conditions than the GCN4 construct. Both GCN4- and fibritin-stabilized soluble gp140 glycoproteins exhibited patterns of neutralizing and nonneutralizing antibody binding expected for the functional envelope glycoprotein spike. Of note, two potently neutralizing antibodies, immunoglobulin G1b12 and 2G12, exhibited the greatest recognition of the stabilized, soluble trimers, relative to recognition of the gp120 monomer. The observed similarities between the GCN4 and fibritin constructs indicate that the HIV-1 envelope glycoprotein ectodomains dictate many of the antigenic and structural features of these fusion proteins. The melting temperatures and ligand recognition properties of the GCN4- and fibritin-stabilized soluble gp140 glycoproteins suggest that these molecules assume conformations distinct from that of the fusion-active, six-helix bundle.

ACRP30, a new hormone controlling fat and glucose metabolism

Adipocyte complement-related protein of 30 kDa (ACRP30) is a secreted serum protein expressed exclusively in differentiated adipocytes. Recent studies have indicated that its expression and serum levels are reduced in humans and animals with obesity and insulin resistance. Metabolic studies have demonstrated a role for ACRP30 in the regulation of glucose and lipid homeostasis. This review will describe the current literature on the biochemistry of ACRP30 and its physiological functions. We will also discuss issues that are relevant to the directions of future research.

Nucleation and propagation of the collagen triple helix in single-chain and trimerized peptides: transition from third to first order kinetics

The kinetics of triple helix formation from single non-crosslinked peptide chains were studied for the collagen models (ProProGly)10 and (ProHypGly)10 in a broad concentration range and compared with those in nucleated trimers. At very low peptide concentrations the reaction order is 3 but decreases at higher concentrations. For (ProProGly)10 the third order rate constant is 800 M(-2) x s(-1) at 7 degrees C, which corresponds to a very long half time of 15 hours at 60 microM chain concentration. For (ProHypGly)10 the rate constant is about 1000-fold higher, which is consistent with the stabilizing effect of 4-hydroxyproline in collagens. The concentration dependence of the reaction order is explained by a nucleation mechanism in which a very unstable dimer is in fast equilibrium with the monomeric chains and addition of the third chain occurs in a rate-limiting step. At high concentrations nucleation is faster than propagation of helix formation and propagation becomes rate-limiting. To test this hypothesis an artificial nucleus was introduced by fusion of (ProProGly)10 with the trimeric foldon domain of T4 phage or the crosslinking domain of collagen III GlyProProGlyProCysCysGlyGlyGly. These domains were recombinantly attached to the C terminus of (GlyProPro)10 and link the three chains in a similar way to the C-terminal propeptide domain in collagen III. This results in a local intrinsic chain concentration of about 1 M. A first order reaction is observed for the folding of the triple helix in (GlyProPro)10foldon with a half time of 8.3 minutes, which approximately matches the rate of folding from single chains at 1 M peptide concentration. A high activation energy of 54 kJ/mol is found for this reaction, whereas the temperature dependence of the nucleation step is close to zero, confirming earlier findings on natural collagens that cis-trans isomerization of peptide bonds is the rate-limiting step in propagation.

Domain organization, folding and stability of bacteriophage T4 fibritin, a segmented coiled-coil protein

Fibritin is a segmented coiled-coil homotrimer of the 486-residue product of phage T4 gene wac. This protein attaches to a phage particle by the N-terminal region and forms fibrous whiskers of 530 A, which perform a chaperone function during virus assembly. The short C-terminal region has a beta-annulus-like structure. We engineered a set of fibritin deletion mutants sequentially truncated from the N-termini, and the mutants were studied by differential scanning calorimetry (DSC) and CD measurements. The analysis of DSC curves indicates that full-length fibritin exhibits three thermal-heat-absorption peaks centred at 321 K (Delta H=1390 kJ x mol trimer(-1)), at 336 K (Delta H=7600 kJ x mol trimer(-1)), and at 345 K (Delta H=515 kJ x mol trimer(-1)). These transitions were assigned to the N-terminal, segmented coiled-coil, and C-terminal functional domains, respectively. The coiled-coil region, containing 13 segments, melts co-operatively as a single domain with a mean enthalpy Delta Hres=21 kJ x mol residue(-1). The ratio of Delta HVH/Delta Hcal for the coiled-coil part of the 120-, 182-, 258- and 281-residue per monomer mutants, truncated from the N-termini, and for full-length fibritin are 0.91, 0.88, 0.42, 0.39, and 0.13, respectively. This gives an indication of the decrease of the 'all-or-none' character of the transition with increasing protein size. The deletion of the 12-residue-long loop in the 120-residue fibritin increases the thermal stability of the coiled-coil region. According to CD data, full-length fibritin and all the mutants truncated from the N-termini refold properly after heat denaturation. In contrast, fibritin XN, which is deleted for the C-terminal domain, forms aggregates inside the cell. The XN protein can be partially refolded by dilution from urea and does not refold after heat denaturation. These results confirm that the C-terminal domain is essential for correct fibritin assembly both in vivo and in vitro and acts as a foldon.

The molecular interactions of heat shock protein 47 (Hsp47) and their implications for collagen biosynthesis

Heat shock protein 47 (Hsp47) is a procollagen/collagen-specific molecular chaperone protein derived from the serpin family of proteins and essential for the early stages of collagen biosynthesis. In this paper, the results of an extensive biophysical analysis of mature recombinant mouse Hsp47 show the existence of both a structurally mesostable monomer with a 5-strand A-sheet and/or a hyperstable trimer; both states have biological activity. It is also demonstrated that Hsp47 is able to bind to a monomeric and partially folded conformation collagen mimic peptide (PPG)(10). Upon peptide binding Hsp47 has the capacity to induce the peptide backbone to fold into a polyproline type II conformation. Induction of this conformation results in (PPG)(10) peptides associating into higher order assemblies with increased stability compared with the monomeric peptide alone. These assemblies are similar to those observed by others (Go, N., and Suezaki, Y. (1973) Biopolymers 12, 1927-1930; Engel, J., Chen, H. T., Prockop, D. J., and Klump, H. (1977) Biopolymers 16, 601-622) when the peptide is dissolved at high concentration and are proposed to be long chains of peptides in a collagen-like configuration. Examination of the biophysical characteristics of both monomeric and trimeric Hsp47-(PPG)(10) complexes is also used to determine that the peptide-binding site does not reside in strand 4 position of sheet A, as observed for other serpins (Skinner, R., Chang, W. S. W., Jin, L., Pei, X., Huntington, J. A., Abrahams, J. P., Carrell, R. W., and Lomas, D. A. (1998) J. Mol. Biol. 283, 9-14), leaving earlier proposals of a binding site near helix A viable.