Thermogelling chitosan and collagen composite hydrogels initiated with beta-glycerophosphate for bone tissue engineering

Chitosan hydrogel as siRNA vector for prolonged gene silencing

Background

The periodontitis is one of the most prevalent diseases with alveolar resorption in adult people and is the main cause of the tooth loss. To investigate the possibility for protecting the loss of alveolar bone in periodontal diseases, a RNAi-based therapeutic strategy is applied for silencing RANK signaling using thermosensitive chitosan hydrogel as siRNA reservoir and vector.

Results

The thermosensitive chitosan hydrogel was formed from solution (PH = 7.2, at 4°C) at 37°C within 8 minutes. The degradation rates of hydrogel were ~50% and 5% (W remaining/W beginning) in the presence and absence of lysozyme, respectively, over a period of 20 days. The concurrent cumulative in vitro release of Cy3-labeled siRNA from the hydrogel was 50% and 17% over 14 days, with or without lysozyme digestion, respectively. High cell viability (>88%) was maintained for cells treated with hydrogel loaded with RANK specific siRNA and RANK knockdown was prolonged for up to 9 days when cells were incubated with siRNA/hydrogel complex. In vivo release of siRNA was investigated in a subcutaneous delivery setup in mice. The fluorescent signal from siRNA within hydrogel was remained for up to 14 days compared to less than one day for siRNA alone.

Conclusions

Chitosan hydrogel can potentially serve as a suitable reservoir and vector for local sustained delivery of siRNA in potential therapy.

Directing chondrogenic differentiation of mesenchymal stem cells with a solid-supported chitosan thermogel for cartilage tissue engineering

Hydrogels are attractive for cartilage tissue engineering because of their high plasticity and similarity with the native cartilage matrix. However, one critical drawback of hydrogels for osteochondral repair is their inadequate mechanical strength. To address this limitation, we constructed a solid-supported thermogel comprising a chitosan hydrogel system and demineralized bone matrix. Scanning electron microscopy, the equilibrium scanning ratio, the biodegradation rate, biomechanical tests, biochemical assays, metabolic activity tests, immunostaining and cartilage-specific gene expression analysis were used to evaluate the solid-supported thermogel. Compared with pure hydrogel or demineralized matrix, the hybrid biomaterial showed superior porosity, equilibrium swelling and degradation rate. The hybrid scaffolds exhibited an increased mechanical strength: 75% and 30% higher compared with pure hydrogels and demineralized matrix, respectively. After three days culture, bone-derived mesenchymal stem cells (BMSCs) maintained viability above 90% in all three materials; however, the cell retention of the hybrid scaffolds was more efficient and uniform than the other materials. Matrix production and chondrogenic differentiation of BMSCs in the hybrid scaffolds were superior to its precursors, based on glycosaminoglycan quantification and hyaline cartilage marker expression after three weeks in culture. Its easy preparation, favourable biophysical properties and chondrogenic capacity indicated that this solid-supported thermogel could be an attractive biomaterial framework for cartilage tissue engineering.

High internal phase emulsion templating with self-emulsifying and thermoresponsive chitosan-graft-PNIPAM-graft-oligoproline

High internal phase emulsion (HIPE)-templating is an attractive method of producing high porosity polymer foams with tailored pore structure, pore size and porosity. However, this method typically requires the use of large amounts of surfactants to stabilize the immiscible liquid phases, and polymerizable monomers/cross-linker in the continuous minority phase to solidify the HIPE, which may not be desirable in many applications. We show that polyHIPEs with a porosity of 73% can be formed solely using a copolymer of chitosan-graft-PNIPAM-graft-oligoproline (CSN-PRO), which acts simultaneously as emulsifier and thermoresponsive gelator, and forms upon removal of the liquid templating phases, the bulk structure of the resulting polyHIPE. With only a small amount of surfactant (1%v/v in the aqueous phase), and varying the polymer concentration and internal phase volume ratio, different polyHIPEs with porosities of up to 99%, surface areas in excess of 300 m(2)/g and controlled pore interconnectivity can be formed. The poly(CSN-PRO)HIPEs are also shown to be thermoresponsive and remained intact when immersed into water above 34 °C but dissolve below their LCST, which is useful for applications such as drug delivery and tissue engineering scaffolds.

A new injectable in situ forming hydroxyapatite and thermosensitive chitosan gel promoted by Na₂CO₃

A new injectable in situ forming hydroxyapatite and thermosensitive chitosan gel (chitosan/HA/Na2CO3 gel) promoted by Na2CO3 was preliminarily synthesized. This study was the first to use Na2CO3 as coagulant to construct the chitosan thermosensitive gel. The sol–gel phase transition, degradation, and morphology of the gel were examined. We found that chitosan/HA/Na2CO3 sol with 1.4% Na2CO3 has a suitable gelation time (9 min) and degradation rate. SEM images of the dried gel show a porous netlike framework. TEM, EDS, and XRD were combined to confirm the presence of hydroxyapatite. In vitro cell culture was performed by using rat bone mesenchymal stem cells (rBMSCs). rBMSCs survived well on the chitosan gel scaffold that formed in vitro and in vivo, indicating that the chitosan gel was a suitable substrate for the attachment and proliferation of rBMSCs. Subcutaneous implantation of the chitosan gel formed in situ into a nude mouse revealed that the chitosan gel loaded with rBMSCs could lead to angiogenesis.

Scaffold design for bone regeneration

The use of bone grafts is the standard to treat skeletal fractures, or to replace and regenerate lost bone, as demonstrated by the large number of bone graft procedures performed worldwide. The most common of these is the autograft, however, its use can lead to complications such as pain, infection, scarring, blood loss, and donor-site morbidity. The alternative is allografts, but they lack the osteoactive capacity of autografts and carry the risk of carrying infectious agents or immune rejection. Other approaches, such as the bone graft substitutes, have focused on improving the efficacy of bone grafts or other scaffolds by incorporating bone progenitor cells and growth factors to stimulate cells. An ideal bone graft or scaffold should be made of biomaterials that imitate the structure and properties of natural bone ECM, include osteoprogenitor cells and provide all the necessary environmental cues found in natural bone. However, creating living tissue constructs that are structurally, functionally and mechanically comparable to the natural bone has been a challenge so far. This focus of this review is on the evolution of these scaffolds as bone graft substitutes in the process of recreating the bone tissue microenvironment, including biochemical and biophysical cues.

Thermosensitive chitosan/glycerophosphate-based hydrogel and its derivatives in pharmaceutical and biomedical applications

INTRODUCTION

Thermogelling chitosan (CS)/glycerophosphate (GP) solutions have been reported as a new type of parenteral in situ forming depot system. These free-flowing solutions at ambient temperature turn into semi-solid hydrogels after parenteral administration.

AREAS COVERED

Formulation parameters such as CS physico-chemical characteristics, CS/gelling agent ratio or pH of the system, were acknowledged as key parameters affecting the solution stability, the sol/gel transition behavior and/or the final hydrogel structure. We discuss also the use of the standard CS/GP thermogels for various biomedical applications, including drug delivery and tissue engineering. Furthermore, this manuscript reviews the different strategies implemented to improve the hydrogel characteristics such as combination with carrier particles, replacement of GP, addition of a second polymer and chemical modification of CS.

EXPERT OPINION

The recent advances in the formulation of CS-based thermogelling systems already overcame several challenges faced by the standard CS/GP system. Dispersion of drug-loaded carrier particles into the thermogels allowed achieving prolonged release profiles for low molecular weight drugs; incorporation of an additional polymer enabled to strengthen the network, while the use of chemically modified CS led to enhanced pH sensitivity or biodegradability of the matrix.

Influence of scaffold composition over in vitro osteogenic differentiation of hBMSCs and in vivo inflammatory response

To understand the role of chitosan in chitosan-poly(butylene succinate) scaffolds (50% wt), 50%, 25%, and 0% of chitosan were used to produce different scaffolds. These scaffolds were in vitro seeded and cultured with human bone marrow stromal cells in osteogenic conditions, revealing that higher percentage of chitosan showed enhanced cell viability over time, adhesion, proliferation, and osteogenic differentiation. Scaffolds were also implanted in cranial defects and iliac submuscular region in Wistar rats, and the results evidenced that chitosan-containing scaffolds displayed mild inflammatory response and good integration with surrounding tissues, showed by connective tissue colonization and the presence of new blood vessels. Scaffolds without chitosan-evidenced necrotic tissue in scaffolds' interior, proving that chitosan exerts a positive effect over cell behavior and displays a milder host inflammatory response in vivo.

Thermoreversible hyaluronan-based hydrogel supports in vitro and ex vivo disc-like differentiation of human mesenchymal stem cells

BACKGROUND CONTEXT

The fate of human mesenchymal stem cells (hMSCs) supplied to the degenerating intervertebral disc (IVD) is still not fully understood and can be negatively affected by low oxygen, pH, and glucose concentration of the IVD environment. The hMSC survival and yield upon injection of compromised IVD could be improved by the use of an appropriate carrier and/or by predifferentiation of hMSCs before injection.

PURPOSE

To optimize hMSC culture conditions in thermoreversible hyaluronan-based hydrogel, hyaluronan-poly(N-isopropylacrylamide) (HA-pNIPAM), to achieve differentiation toward the disc phenotype in vitro, and evaluate whether preconditioning contributes to a better hMSC response ex vivo.

STUDY DESIGN

In vitro and ex vivo whole-organ culture of hMSCs.

METHODS

In vitro cultures of hMSCs were conducted in HA-pNIPAM and alginate for 1 week under hypoxia in chondropermissive medium alone and with the supplementation of transforming growth factor β1 or growth and differentiation factor 5 (GDF-5). Ex vivo, hMSCs were either suspended in HA-pNIPAM and directly supplied to the IVDs or predifferentiated with GDF-5 for 1 week in HA-pNIPAM and then supplied to the IVDs. Cell viability was evaluated by Live-Dead assay, and DNA, glycosaminoglycan (GAG), and gene expression profiles were used to assess hMSC differentiation toward the disc phenotype.

RESULTS

The HA-pNIPAM induced hMSC differentiation toward the disc phenotype more effectively than alginate: in vitro, higher GAG/DNA ratio and higher collagen type II, SOX9, cytokeratin-19, cluster of differentiation 24, and forkhead box protein F1 expressions were found for hMSCs cultured in HA-pNIPAM compared with those cultured in alginate, regardless of the addition of growth factors. Ex vivo, direct combination of HA-pNIPAM with the disc environment induced a stronger disc-like differentiation of hMSCs than predifferentiation of hMSCs followed by their delivery to the discs.

CONCLUSIONS

Hyaluronan-based thermoreversible hydrogel supports hMSC differentiation toward the disc phenotype without the need for growth factor supplementation in vitro and ex vivo. Further in vivo studies are required to confirm the suitability of this hydrogel as an effective stem cell carrier for the treatment of IVD degeneration.

Comparison of uncultured marrow mononuclear cells and culture-expanded mesenchymal stem cells in 3D collagen-chitosan microbeads for orthopedic tissue engineering

Stem cell-based therapies have shown promise in enhancing repair of bone and cartilage. Marrow-derived mesenchymal stem cells (MSC) are typically expanded in vitro to increase cell number, but this process is lengthy, costly, and there is a risk of contamination and altered cellular properties. Potential advantages of using fresh uncultured bone marrow mononuclear cells (BMMC) include heterotypic cell and paracrine interactions between MSC and other marrow-derived cells including hematopoietic, endothelial, and other progenitor cells. In the present study, we compared the osteogenic and chondrogenic potential of freshly isolated BMMC to that of cultured-expanded MSC, when encapsulated in three-dimensional (3D) collagen-chitosan microbeads. The effect of low and high oxygen tension on cell function and differentiation into orthopedic lineages was also examined. Freshly isolated rat BMMC (25 × 10(6) cells/mL, containing an estimated 5 × 10(4) MSC/mL) or purified and culture-expanded rat bone marrow-derived MSC (2 × 10(5) cells/mL) were added to a 65-35 wt% collagen-chitosan hydrogel mixture and fabricated into 3D microbeads by emulsification and thermal gelation. Microbeads were cultured in control MSC growth media in either 20% O2 (normoxia) or 5% O2 (hypoxia) for an initial 3 days, and then in control, osteogenic, or chondrogenic media for an additional 21 days. Microbead preparations were evaluated for viability, total DNA content, calcium deposition, and osteocalcin and sulfated glycosaminoglycan expression, and they were examined histologically. Hypoxia enhanced initial progenitor cell survival in fresh BMMC-microbeads, but it did not enhance osteogenic potential. Fresh uncultured BMMC-microbeads showed a similar degree of osteogenesis as culture-expanded MSC-microbeads, even though they initially contained only 1/10th the number of MSC. Chondrogenic differentiation was not strongly supported in any of the microbead formulations. This study demonstrates the microbead-based approach to culturing and delivering cells for tissue regeneration, and suggests that fresh BMMC may be an alternative to using culture-expanded MSC for bone tissue engineering.

Designing degradable hydrogels for orthogonal control of cell microenvironments

Degradable and cell-compatible hydrogels can be designed to mimic the physical and biochemical characteristics of native extracellular matrices and provide tunability of degradation rates and related properties under physiological conditions. Hence, such hydrogels are finding widespread application in many bioengineering fields, including controlled bioactive molecule delivery, cell encapsulation for controlled three-dimensional culture, and tissue engineering. Cellular processes, such as adhesion, proliferation, spreading, migration, and differentiation, can be controlled within degradable, cell-compatible hydrogels with temporal tuning of biochemical or biophysical cues, such as growth factor presentation or hydrogel stiffness. However, thoughtful selection of hydrogel base materials, formation chemistries, and degradable moieties is necessary to achieve the appropriate level of property control and desired cellular response. In this review, hydrogel design considerations and materials for hydrogel preparation, ranging from natural polymers to synthetic polymers, are overviewed. Recent advances in chemical and physical methods to crosslink hydrogels are highlighted, as well as recent developments in controlling hydrogel degradation rates and modes of degradation. Special attention is given to spatial or temporal presentation of various biochemical and biophysical cues to modulate cell response in static (i.e., non-degradable) or dynamic (i.e., degradable) microenvironments. This review provides insight into the design of new cell-compatible, degradable hydrogels to understand and modulate cellular processes for various biomedical applications.

Cell-based approaches to the engineering of vascularized bone tissue

This review summarizes recent efforts to create vascularized bone tissue in vitro and in vivo through the use of cell-based therapy approaches. The treatment of large and recalcitrant bone wounds is a serious clinical problem, and in the United States approximately 10% of all fractures are complicated by delayed union or non-union. Treatment approaches with the use of growth factor and gene delivery have shown some promise, but results are variable and clinical complications have arisen. Cell-based therapies offer the potential to recapitulate key components of the bone-healing cascade, which involves concomitant regeneration of vasculature and new bone tissue. For this reason, osteogenic and vasculogenic cell types have been combined in co-cultures to capitalize on the function of each cell type and to promote heterotypic interactions. Experiments in both two-dimensional and three-dimensional systems have provided insight into the mechanisms by which osteogenic and vasculogenic cells interact to form vascularized bone, and these approaches have been translated to ectopic and orthotopic models in small-animal studies. The knowledge generated by these studies will inform and facilitate the next generation of pre-clinical studies, which are needed to move cell-based orthopaedic repair strategies into the clinic. The science and application of cytotherapy for repair of large and ischemic bone defects is developing rapidly and promises to provide new treatment methods for these challenging clinical problems.

Rapid, guanosine 5'-diphosphate-induced, gelation of chitosan sponges as novel injectable scaffolds for soft tissue engineering and drug delivery applications

Novel injectable chitosan sponges based on rapid ionic crosslinking using guanosine 5'-diphosphate are introduced. The rapid gelation, high water retention, desirable physicochemical properties, soft tissue-like mechanical properties, and excellent cytocompatibility make these injectable sponges promising candidates for tissue regeneration and drug delivery applications.

Biomaterials for tissue engineering

Biomaterials serve as an integral component of tissue engineering. They are designed to provide architectural framework reminiscent of native extracellular matrix in order to encourage cell growth and eventual tissue regeneration. Bone and cartilage represent two distinct tissues with varying compositional and mechanical properties. Despite these differences, both meet at the osteochondral interface. This article presents an overview of current biomaterials employed in bone and cartilage applications, discusses some design considerations, and alludes to future prospects within this field of research.

Mechanical & cell culture properties of elastin-like polypeptide, collagen, bioglass, and carbon nanosphere composites

Collagen, the most commonly used extra-cellular matrix protein for tissue engineering applications, displays poor mechanical properties. Here, we report on the preparation and characterization of novel multi-component composite systems that incorporate a genetically engineered, biocompatible polymer (elastin-like polypeptide, ELP), biodegradable ceramic (45S5 bioglass), carbon nanosphere chains (CNSC), and minimal amount (~25% w/w) of collagen. We hypothesized that incorporation of bioglass and CNSC would improve mechanical properties of the composites. Our results showed that the tensile strength and elastic modulus nearly doubled after addition of the bioglass and CNSC compared to the control ELP-collagen hydrogels. Further, MC3T3-E1 pre-osteoblasts were cultured within the composite hydrogels and a thorough biochemical and morphological characterization was performed. Live/dead assay confirmed high cell viability (>95%) for all hydrogels by day 21 of culture. Alkaline phosphatase (ALP) activity and osteocalcin (OCN) production assessed the pre-osteoblast differentiation. Normalized ALP activity was highest for the cells cultured within ELP-bioglass-collagen hydrogels, while normalized OCN production was equivalent for all hydrogels. Alizarin red staining confirmed the mineral deposition by the cells within all hydrogels. Thus, the multi-component composite hydrogels displayed improved mechanical and cell culture properties and may be suitable scaffold materials for bone tissue engineering.

Injectable thermosensitive chitosan/β-glycerophosphate/collagen hydrogel maintains the plasticity of skeletal muscle satellite cells and supports their in vivo viability

A cell carrier plays an important role in the maintenance, growth and engraftment of specific cells aimed for defined therapeutic uses in many tissue engineering strategies. A suitable microenvironment for the cells allows for the maximum efficacy of the hybrid device. We have prepared an injectable thermosensitive chitosan/β-glycerophosphate/collagen (C/GP/Co) gel and investigated its potential application as a support for the culture of skeletal muscle satellite cells (SMSCs). A cell viability assay was used to evaluate the in vitro cytocompatibility of the gel. Cell growth was assessed by scanning electron microscopy (SEM), confocal laser scanning microscopy (CLSM) and histological analysis. The influence of the C/GP/Co gel on the plasticity of SMSCs seeded at the surface of the gel was assessed by induction of the myogenic, osteogenic and adipogenic differentiation. C/GP/Co gel provided the appropriate environment for the culture of SMSCs in vitro. In addition, the C/GP/Co gel supported SMSC plasticity. In vivo testing of the SMSC-seeded gel was investigated by subcutaneous injection into the dorsum of nude mice. Cell viability was assessed both by in vivo imaging and histological examination of the explants. In conclusion, C/GP/Co hydrogel is a cytocompatible carrier for the in vivo delivery of SMSCs and supportive for SMSC plasticity. Thus, this gel has potential applications in tissue engineering and regenerative medicine.

Engineering the matrix microenvironment for cell delivery and engraftment for tissue repair

Cell-based therapies represent promising strategies for tissue repair, particularly in cases in which host cells, due to disease, age, or excessive trauma, are unable to repair the defect or deficiency alone, even with additional delivered therapeutics. Current cell therapies fail to address long-term engraftment or delivery timing and location and result in modest improvements with long term engraftment rates of less than 1%. In many cell therapy applications, an appropriate carrier must be used to deliver transplanted cells and promote cell engraftment and function for a successful outcome by providing the appropriate microenvironment for the interactions between transplanted and host cells. This review highlights important considerations for engineering the microenvironment for cell delivery and engraftment in tissue repair.

Assembly of discrete collagen-chitosan microenvironments into multiphase tissue constructs

Modular assembly of protein-polysaccharide microenvironments into 3D macroscale tissue constructs is reported. Rapid and simple centrifugation and vacuum molding methods are used to create cohesive multiphase constructs with prescribed geometries. Human fibroblasts are shown to survive in the microenvironments and in the macroscale constructs. Control of the spatial organization in engineered tissues is a key to recreating the complex tissue architectures needed for regenerative therapies.

Delivery of mesenchymal stem cells in chitosan/collagen microbeads for orthopedic tissue repair

Microencapsulation and delivery of stem cells in biomaterials is a promising approach to repairing damaged tissue in a minimally invasive manner. An appropriate biomaterial niche can protect the embedded cells from the challenging environment in the host tissue, while also directing stem cell differentiation toward the desired lineage. In this study, adult human mesenchymal stem cells (MSC) were embedded in hydrogel microbeads consisting of chitosan and type I collagen using an emulsification process. Glyoxal and β-glycerophosphate were used as chemical and physical crosslinkers to initiate copolymerization of the matrix materials. The average size and size distribution of the microbeads could be varied by controlling the emulsification conditions. Spheroidal microbeads ranging in diameter from 82 ± 19 to 290 ± 78 µm were produced. Viability staining showed that MSC survived the encapsulation process (>90% viability) and spread inside the matrix over a period of 9 days in culture. Induced osteogenic differentiation using medium supplements showed that MSC increased gene expression of osterix and osteocalcin over time in culture, and also deposited calcium mineral. Bone sialoprotein and type I collagen gene expression were not affected. Delivery of microbeads through standard needles at practically relevant flow rates did not adversely affect cell viability, and microbeads could also be easily molded into prescribed geometries for delivery. Such protein-based microbeads may have utility in orthopedic tissue regeneration by allowing minimally invasive delivery of progenitor cells in microenvironments that are both protective and instructive.

Physical properties and in vitro evaluation of collagen-chitosan-calcium phosphate microparticle-based scaffolds for bone tissue regeneration

Due to limitations of bone autografts and allografts, synthetic bone grafts using osteoconductive biomaterials have been designed. In this study, collagen-chitosan-calcium phosphate microparticle-based scaffolds fused with glycolic acid were compared to their counterparts without collagen in terms of degradation, cytocompatibility, porosity, and Young's modulus. It was found that 26-30% collagen was incorporated and that hydroxyapatite was present. Moreover, there were no differences between control and collagen scaffolds in degradation, cytocompatibility, porosity, and Young's modulus. In general, scaffolds exhibited 23% porosity, 0.6-1.2 MPa Young's modulus, 23% degradation over 4 weeks, and supported a four to seven fold increase in osteoblast cell number over 7 days in culture. Collagen can be incorporated into these bone graft substitute scaffolds, which show an improved degradation profile.

Collagen for bone tissue regeneration

In the last decades, increased knowledge about the organization, structure and properties of collagen (particularly concerning interactions between cells and collagen-based materials) has inspired scientists and engineers to design innovative collagen-based biomaterials and to develop novel tissue-engineering products. The design of resorbable collagen-based medical implants requires understanding the tissue/organ anatomy and biological function as well as the role of collagen's physicochemical properties and structure in tissue/organ regeneration. Bone is a complex tissue that plays a critical role in diverse metabolic processes mediated by calcium delivery as well as in hematopoiesis whilst maintaining skeleton strength. A wide variety of collagen-based scaffolds have been proposed for different tissue engineering applications. These scaffolds are designed to promote a biological response, such as cell interaction, and to work as artificial biomimetic extracellular matrices that guide tissue regeneration. This paper critically reviews the current understanding of the complex hierarchical structure and properties of native collagen molecules, and describes the scientific challenge of manufacturing collagen-based materials with suitable properties and shapes for specific biomedical applications, with special emphasis on bone tissue engineering. The analysis of the state of the art in the field reveals the presence of innovative techniques for scaffold and material manufacturing that are currently opening the way to the preparation of biomimetic substrates that modulate cell interaction for improved substitution, restoration, retention or enhancement of bone tissue function.

Noninvasive, quantitative, spatiotemporal characterization of mineralization in three-dimensional collagen hydrogels using high-resolution spectral ultrasound imaging

As tissue engineering products move toward the clinic, nondestructive methods to monitor their development and ensure quality are needed. In this study, high-resolution spectral ultrasound imaging (SUSI) was used to noninvasively characterize mineral content in collagen hydrogels. SUSI was used to generate three-dimensional (3D) grayscale (GS) images of construct morphology with submillimeter resolution. Spectral analysis of the backscattered radio frequency (RF) ultrasound signals was used to determine the midband fit (MBF) and slope of the linearized RF spectrum. These parameters are operator and instrument independent, and were used to characterize the spatial distribution of mineral in constructs supplemented with hydroxyapatite particles. GS and MBF correlated closely with mineral content, while slope was not dependent on concentration. SUSI also was used to monitor mineralization of collagen constructs by immersion in simulated body fluid (SBF) over 21 days. The construct surface was mineralized before the interior, and there was a dose-dependent effect of SBF concentration on degree of mineralization and deposited particle size. MBF density was closely correlated with the amount of calcium deposited. These data demonstrate that SUSI has utility as a noninvasive imaging method for quantitative analysis of mineralization in 3D protein constructs. Such techniques may assist the development of engineered orthopedic tissues.

Processing-structure-functional property relationship in organic-inorganic nanostructured scaffolds for bone-tissue engineering: the response of preosteoblasts

We elucidate here for the first time the structure-processing-functional property relationship in chitosan (CS)-based scaffolds, where molecular machinery governing proliferation and growth of osteoblasts is mediated by nanostructured carbon. The interconnected network structure of organic-inorganic scaffolds was obtained by covalent linkage of carboxyl group of functionalized single-walled carbon nanohorn with the amine group of CS. The molecular-scale dispersibility of functionalized nanostructured carbon was an important physicochemical factor influencing cellular interactions and biological response. Furthermore, it was beneficial in promoting the biocompatibility and the degradation product of the scaffolds. The hydrophilicity, good water retention ability, and interconnected porous structure of organic-inorganic scaffolds enabled pronounced cell attachment and proliferation and enhanced the stability toward enzymatic degradation. The infiltration of cells and colonization of the pores of the scaffolds and cellular interactions were promoted due to covalent linkage of nanostructured carbon with CS. Additionally, the interconnectivity of porous scaffolds facilitated cells to infiltrate inside the pores of CS-nanostructured scaffolds, implying that nanostructured carbon merits consideration in tissue engineering.

Exogenous mineralization of cell-seeded and unseeded collagen-chitosan hydrogels using modified culture medium

Induced biomineralization of materials has been employed as a strategy to increase integration with host tissue, and more recently as a method to control cell function in tissue engineering. However, mineralization is typically performed in the absence of cells, since hypertonic solutions that lack the nutrients and culture components required for the maintenance of cell viability are often used. In the present study, we exposed fibroblast-seeded three-dimensional collagen-chitosan hydrogels to a defined culture medium modified to have specific concentrations of ions involved in biomineralization. The modified medium caused a significant increase in calcium deposition in collagen-chitosan gels, relative to constructs incubated in a standard medium, though serum supplementation attenuated mineral deposition. Collagen-chitosan constructs became opaque over 3 days of mineralization in modified Dulbecco's modified Eagle medium (DMEM), in contrast to translucent control gels incubated in standard DMEM. Histological staining confirmed increased levels of mineral in the treated constructs. Rheological characterization showed that both the storage and loss moduli increased significantly in mineralized materials. Mineralization of fibroblast-seeded constructs resulted in decreased cell viability and proliferation rate over 3 days of incubation in modified medium, but the cell population remained over 75% viable and regained its proliferative potential after rescue in standard culture medium. The ability to mineralize protein matrices in the presence of cells could be useful in creating mechanically stable tissue constructs, as well as to study the effects of the tissue microenvironment on cell function.

Injectable and biodegradable hydrogels: gelation, biodegradation and biomedical applications

Injectable hydrogels with biodegradability have in situ formability which in vitro/in vivo allows an effective and homogeneous encapsulation of drugs/cells, and convenient in vivo surgical operation in a minimally invasive way, causing smaller scar size and less pain for patients. Therefore, they have found a variety of biomedical applications, such as drug delivery, cell encapsulation, and tissue engineering. This critical review systematically summarizes the recent progresses on biodegradable and injectable hydrogels fabricated from natural polymers (chitosan, hyaluronic acid, alginates, gelatin, heparin, chondroitin sulfate, etc.) and biodegradable synthetic polymers (polypeptides, polyesters, polyphosphazenes, etc.). The review includes the novel naturally based hydrogels with high potential for biomedical applications developed in the past five years which integrate the excellent biocompatibility of natural polymers/synthetic polypeptides with structural controllability via chemical modification. The gelation and biodegradation which are two key factors to affect the cell fate or drug delivery are highlighted. A brief outlook on the future of injectable and biodegradable hydrogels is also presented (326 references).

Rheological study of physical cross-linked quaternized cellulose hydrogels induced by β-glycerophosphate

As a weak base, β-glycerophosphate (β-GP) was used to spontaneously initiate gelation of quaternized cellulose (QC) solutions at body temperature. The QC/β-GP solutions are flowable below or at room temperature but gel rapidly under physiological conditions. In order to clarify the sol-gel transition process of the QC/β-GP systems, the complex was investigated by dynamic viscoelastic measurements. The shear storage modulus (G') and loss modulus (G″) as a function of (1) concentration of β-GP (c(β-GP)), (2) concentration of QC (c(QC)), (3) degree of substitution (DS; i.e., the average number of substituted hydroxyl groups in the anhydroglucose unit) of QC, (4) viscosity-average molecular weight (M(η)) of QC, and (5) solvent medium were studied by the oscillatory rheology. The sol-gel transition temperature of QC/β-GP solutions decreased with an increase of c(QC) and c(β-GP), the M(η) of QC, and a decrease of the DS of QC and pH of the solvent. The sol-gel transition temperature and time could be easily controlled by adjusting the concentrations of QC and β-GP, M(η) and DS of QC, and the solvent medium. Gels formed after heating were irreversible; i.e., after cooling to lower temperature they could not be dissolved to become liquid again. The aggregation and entanglement of QC chains, electrostatic interaction, and hydrogen bonding between QC and β-GP were the main factors responsible for the irreversible sol-gel transition behavior of QC/β-GP systems.

Phase-separated chitosan-fibrin microbeads for cell delivery

Matrix-enhanced delivery of cells is a promising approach to improving current cell therapies. Our objective was to create cell-laden composite microbeads that combine the attractive features of the natural polymers chitosan and fibrin. Liquid polydimethylsiloxane was used to emulsify a chitosan-fibrinogen solution containing suspended human fibroblast cells, followed by initiation of thrombin-mediated polymerization of fibrin and thermal/pH-mediated gelation of chitosan. Chitosan/fibrin weight percent (wt%) ratios of 100/0, 75/25, 50/50 and 25/75 were investigated. Microbead diameters ranged from 275 ± 99 µm to 38 ± 10 µm using impeller speeds from 600 to 1400 rpm. Fibroblasts remained viable on day 1 post-fabrication in all matrices, but cell viability was markedly higher in high-fibrin microbeads by day 8 post-fabrication. Cell spreading and interaction with the extracellular matrix was also markedly increased in high-fibrin matrices. Such composite microbeads containing viable entrapped cells have potential for minimally invasive delivery of cells for a variety of tissue repair applications.

Delivery of demineralized bone matrix powder using a thermogelling chitosan carrier

Demineralized bone matrix (DBM) powder is widely used for bone regeneration due to its osteoinductivity and osteoconductivity. However, difficulties with handling, its tendency to migrate from graft sites, and lack of stability after surgery can sometimes limit the clinical utility of this material. In this work, the possibility of using a thermogelling chitosan carrier to deliver DBM powder was assessed. The DBM-thermogelling putty improved handling and formed a gel-like composite in situ at body temperature within a clinically relevant time period. The properties of the formed composite, including morphology, porosity, mechanical properties, equilibrium swelling as well as degradability, are significantly influenced by the ratio of DBM to thermogelling chitosan. The in vitro study showed that the alkaline phosphatase activity of C2C12 cells encapsulated in the composite was steadily increased with culture time. The in vivo study showed that increased DBM content in the DBM-thermogelling chitosan induced ectopic bone formation in a nude rat model. The diffusion of growth factor from the DBM-thermogelling chitosan as well as the host-implant interactions are discussed.

Microencapsulating and Banking Living Cells for Cell-Based Medicine

A major challenge to the eventual success of the emerging cell-based medicine such as tissue engineering, regenerative medicine, and cell transplantation is the limited availability of the desired cell sources. This challenge can be addressed by cell microencapsulation to overcome the undesired immune response (i.e., to achieve immunoisolation) so that non-autologous cells can be used to treat human diseases, and by cell/tissue preservation to bank living cells for wide distribution to end users so that they are readily available when needed in the future. This review summarizes the status quo of research in both cell microencapsulation and banking the microencapsulated cells. It is concluded with a brief outlook of future research directions in this important field.

Mechanical characterization and non-linear elastic modeling of poly(glycerol sebacate) for soft tissue engineering

Scaffold tissue engineering strategies for repairing and replacing soft tissue aim to improve reconstructive and corrective surgical techniques whose limitations include suboptimal mechanical properties, fibrous capsule formation and volume loss due to graft resorption. An effective tissue engineering strategy requires a scaffolding material with low elastic modulus that behaves similarly to soft tissue, which has been characterized as a nonlinear elastic material. The material must also have the ability to be manufactured into specifically designed architectures. Poly(glycerol sebacate) (PGS) is a thermoset elastomer that meets these criteria. We hypothesize that the mechanical properties of PGS can be modulated through curing condition and architecture to produce materials with a range of stiffnesses. To evaluate this hypothesis, we manufactured PGS constructs cured under various conditions and having one of two architectures (solid or porous). Specimens were then tensile tested according to ASTM standards and the data were modeled using a nonlinear elastic Neo-Hookean model. Architecture and testing conditions, including elongation rate and wet versus dry conditions, affected the mechanical properties. Increasing curing time and temperature led to increased tangent modulus and decreased maximum strain for solid constructs. Porous constructs had lower nonlinear elastic properties, as did constructs of both architectures tested under simulated physiological conditions (wetted at 37 °C). Both solid and porous PGS specimens could be modeled well with the Neo-Hookean model. Future studies include comparing PGS properties to other biological tissue types and designing and characterizing PGS scaffolds for regenerating these tissues.

The osteogenic differentiation of dog bone marrow mesenchymal stem cells in a thermo-sensitive injectable chitosan/collagen/β-glycerophosphate hydrogel: in vitro and in vivo

Type I collagen was added to the composite chitosan solution in a ratio of 1:2 to build a physical cross-linked self-forming chitosan/collagen/β-GP hydrogel. Osteogenic properties of this novel injectable hydrogel were evaluated. Gelation time was about 8 min which offered enough time for handling a mixture containing cells and the subsequent injection. Scanning electronic microscopy (SEM) observations indicated good spreading of bone marrow mesenchymal stem cells (BMSCs) in this hydrogel scaffold. Mineral nodules were found in the dog-BMSCs inoculated hydrogel by SEM after 28 days. After subcutaneous injection into nude mouse dorsum for 4 weeks, partial bone formation was observed in the chitosan/collagen/β-GP hydrogel loaded with pre-osteodifferentiated dog-BMSCs, which indicated that chitosan/collagen/β-GP hydrogel composite could induce osteodifferentiation in BMSCs without exposure to a continual supply of external osteogenic factors. In conclusion, the novel chitosan/collagen/β-GP hydrogel composite should prove useful as a bone regeneration scaffold.

Structure-process-property relationship of the polar graphene oxide-mediated cellular response and stimulated growth of osteoblasts on hybrid chitosan network structure nanocomposite scaffolds

We here describe the structure-process-property relationship of graphene oxide-mediated proliferation and growth of osteoblasts in conjunction with the physico-chemical, mechanical, and structural properties. Chitosan-graphene network structure scaffolds were synthesized by covalent linkage of the carboxyl groups of graphene oxide with the amine groups of chitosan. The negatively charged graphene oxide in chitosan scaffolds was an important physico-chemical factor influencing cell-scaffold interactions. Furthermore, it was advantageous in enhancing the biocompatibility of the scaffolds and the degradation products of the scaffolds. The high water retention ability, hydrophilic nature, and high degree of interconnectivity of the porous structure of chitosan-graphene oxide scaffolds facilitated cell attachment and proliferation and improved the stability against enzymatic degradation. The cells infiltrated and colonized the pores of the scaffolds and established cell-cell interactions. The interconnectivity of the porous structure of the scaffolds helps the flow of medium throughout the scaffold for even cell adhesion. Moreover, the seeded cells were able to infiltrate inside the pores of chitosan-graphene oxide scaffolds, suggesting that the incorporation of polar graphene oxide in scaffolds is promising for bone tissue engineering.

Osteoid-mimicking dense collagen/chitosan hybrid gels

Bone extracellular matrix (ECM) is a 3D network, composed of collagen type I and a number of other macromolecules, including glycosaminoglycans (GAGs), which stimulate signaling pathways that regulate osteoblast growth and differentiation. To model the ECM of bone for tissue regenerative approaches, dense collagen/chitosan (Coll/CTS) hybrid hydrogels were developed using different proportions of CTS to mimic GAG components of the ECM. MC3T3-E1 mouse calvaria preosteoblasts were seeded within plastically compressed Coll/CTS hydrogels with solid content approaching that of native bone osteoid. Dense, cellular Coll/CTS hybrids were maintained for up to 8 weeks under either basal or osteogenic conditions. Higher CTS content significantly increased gel resistance to collagenase degradation. The incorporation of CTS to collagen gels decreased the apparent tensile modulus from 1.82 to 0.33 MPa. In contrast, the compressive modulus of Coll/CTS hybrids increased in direct proportion to CTS content exhibiting an increase from 23.50 to 55.25 kPa. CTS incorporation also led to an increase in scaffold resistance to cell-induced contraction. MC3T3-E1 viability, proliferation, and matrix remodeling capability (via matrix metalloproteinase expression) were maintained. Alkaline phosphatase activity was increased up to two-fold, and quantification of phosphate mineral deposition was significantly increased with CTS incorporation. Thus, dense Coll/CTS scaffolds provide osteoid-like models for the study of osteoblast differentiation and bone tissue engineering.

Biomedical Applications of Biodegradable Polymers

Utilization of polymers as biomaterials has greatly impacted the advancement of modern medicine. Specifically, polymeric biomaterials that are biodegradable provide the significant advantage of being able to be broken down and removed after they have served their function. Applications are wide ranging with degradable polymers being used clinically as surgical sutures and implants. In order to fit functional demand, materials with desired physical, chemical, biological, biomechanical and degradation properties must be selected. Fortunately, a wide range of natural and synthetic degradable polymers has been investigated for biomedical applications with novel materials constantly being developed to meet new challenges. This review summarizes the most recent advances in the field over the past 4 years, specifically highlighting new and interesting discoveries in tissue engineering and drug delivery applications.

Glyoxal crosslinking of cell-seeded chitosan/collagen hydrogels for bone regeneration

Chitosan and collagen are natural biomaterials that have been used extensively in tissue engineering, both separately and as composite materials. Most methods to fabricate chitosan/collagen composites use freeze drying and chemical crosslinking to create stable porous scaffolds, which subsequently can be seeded with cells. In this study, we directly embedded human bone marrow stem cells (hBMSC) in chitosan/collagen materials by initiating gelation using β-glycerophosphate at physiological temperature and pH. We further examined the use of glyoxal, a dialdehyde with relatively low toxicity, to crosslink these materials and characterized the resulting changes in matrix and cell properties. The cytocompatibility of glyoxal and the crosslinked gels were investigated in terms of hBMSC metabolic activity, viability, proliferation and osteogenic differentiation. These studies revealed that glyoxal was cytocompatible at concentrations below about 1mM for periods of exposure up to 15 h, though the degree of cell spreading and proliferation were dependent on matrix composition. Glyoxal-crosslinked matrices were stiffer and compacted less than uncrosslinked controls. It was further demonstrated that hBMSC can attach and proliferate in three-dimensional matrices composed of 50/50 chitosan/collagen, and that these materials supported osteogenic differentiation in response to stimulation. Such glyoxal-crosslinked chitosan/collagen composite materials may find utility as cell delivery vehicles for enhancing the repair of bone defects.

Organic/inorganic hybrid network structure nanocomposite scaffolds based on grafted chitosan for tissue engineering

We describe the first study of structure-processing-property relationship in organic/inorganic hybrid network structure nanocomposite scaffolds based on grafted chitosan for bone tissue engineering. Chitosan was first grafted with propylene oxide to form hydroxypropylated chitosan, which was subsequently linked with ethylene glycol functionalized nanohydroxyapatite to form an organic/inorganic network structure. The resulting scaffold was characterized by a highly porous structure and significantly superior physico-chemical, mechanical and biological properties compared to pure chitosan. The scaffolds exhibited high modulus, controlled swelling behavior and reduced water uptake, but the water retention ability was similar to pure chitosan scaffold. MTT assay studies confirmed the non-cytotoxic nature of the scaffolds and enabled degradation products to be analyzed. The nanocomposite scaffolds were biocompatible and supported adhesion, spreading, proliferation and viability of osteoblasts cells. Furthermore, the cells were able to infiltrate and colonize into the pores of the scaffolds and establish cell-cell interactions. The study suggests that hydroxypropylation of chitosan and forming a network structure with a nano-inorganic constituent is a promising approach for enhancing physico-chemical, functional and biological properties for utilization in bone tissue engineering applications.