The Suzuki-Miyaura reaction after the Nobel prize

C(acyl)–C(sp2) and C(sp2)–C(sp2) Suzuki–Miyaura cross-coupling reactions using nitrile-functionalized NHC palladium complexes

Application of N-heterocyclic carbene (NHC) palladium complexes has been successful for the modulation of C–C coupling reactions. For this purpose, a series of azolium salts (1a–f) including benzothiazolium, benzimidazolium, and imidazolium, bearing a CN-substituted benzyl moiety, and their (NHC)₂PdBr₂ (2a–c) and PEPPSI-type palladium (3b–f) complexes have been systematically prepared to catalyse acylative Suzuki–Miyaura coupling reaction of acyl chlorides with arylboronic acids to form benzophenone derivatives in the presence of potassium carbonate as a base and to catalyse the traditional Suzuki–Miyaura coupling reaction of bromobenzene with arylboronic acids to form biaryls. All the synthesized compounds were fully characterized by Fourier Transform Infrared (FTIR), and ¹H and ¹³C NMR spectroscopies. X-ray diffraction studies on single crystals of 3c, 3e and 3f prove the square planar geometry. Scanning Electron Microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), metal mapping analyses and thermal gravimetric analysis (TGA) were performed to get further insights into the mechanism of the Suzuki–Miyaura cross coupling reactions. Mechanistic studies have revealed that the stability and coordination of the complexes by the CN group are achieved by the removal of pyridine from the complex in catalytic cycles. The presence of the CN group in the (NHC)Pd complexes significantly increased the catalytic activities for both reactions.

Nitrile-functionalized Pd(ii) complexes have evaluated for the Suzuki–Miyaura cross-coupling reactions. The highest TON value was reached for the acylative Suzuki–Miyaura cross-coupling reaction of acyl chlorides with phenylboronic acids.

Porous Organic Polymers Containing Active Metal Centers for Suzuki-Miyaura Heterocoupling Reactions

A new generation of confined palladium(II) catalysts covalently attached inside of porous organic polymers (POPs) has been attained. The synthetic approach employed was straightforward, and there was no prerequisite for making any modification of the precursor polymer. First, POP-based catalytic supports were obtained by reacting one symmetric trifunctional aromatic monomer (1,3,5-triphenylbenzene) with two ketones having electron-withdrawing groups (4,5-diazafluoren-9-one, DAFO, and isatin) in superacidic media. The homopolymers and copolymers were made using stoichiometric ratios between the functional groups, and they were obtained with quantitative yields after the optimization of reaction conditions. Moreover, the number of chelating groups (bipyridine moieties) available to bind Pd(II) ions to the catalyst supports was modified using different DAFO/isatin ratios. The resulting amorphous polymers and copolymers showed high thermal stability, above 500 °C, and moderate-high specific surface areas (from 760 to 935 m² g^-1), with high microporosity contribution (from 64 to 77%). Next, POP-supported Pd(II) catalysts were obtained by simple immersion of the catalyst supports in a palladium(II) acetate solution, observing that the metal content was similar to that theoretically expected according to the amount of bipyridine groups present. The catalytic activity of these heterogeneous catalysts was explored for the synthesis of biphenyl and terphenyl compounds, via the Suzuki-Miyaura cross-coupling reaction using a green solvent (ethanol/water), low palladium loads, and aerobic conditions. The findings showed excellent catalytic activity with quantitative product yields. Additionally, the recyclability of the catalysts, by simply washing it with ethanol, was excellent, with a sp²-sp² coupling yield higher than 95% after five cycles of use. Finally, the feasibility of these catalysts to be employed in tangible organic reactions was assessed. Thus, the synthesis of a bulky compound, 4,4'-dimethoxy-5'-tert-butyl-m-terphenylene, which is a precursor of a thermal rearrangement monomer, was scaled-up to 2 g, with high conversion and 96% yield of the pure product.

Optimization of a Catalytic Chemoenzymatic Tandem Reaction for the Synthesis of Natural Stilbenes in Continuous Flow

In view of the development of efficient processes for the synthesis of high-value compounds, the combination of bio- and chemocatalysis is highly promising. In addition, implementation of immobilized catalysts into continuous setups allows a straightforward separation of the target compound from the reaction mixture and ensures uniform product quality. In this work, we report the optimization of a chemoenzymatic tandem reaction in continuous flow and its extended application for the synthesis of pharmacologically active resveratrol and pterostilbene. The tandem reaction involves enzymatic decarboxylation of coumaric acid employing encapsulated phenolic acid decarboxylase from B. subtilis and a Heck coupling of the obtained vinylphenol with an aryl iodide using heterogeneous Pd-Ce-Sn oxides implemented in a packed bed reactor. By optimization of the reaction conditions for the limiting cross-coupling step, the yield of (E)-4-hydroxystilbene using the fully continuous setup could be more than doubled compared to previous work. Furthermore, the improved chemoenzymatic cascade could also be applied to the synthesis of resveratrol and pterostilbene in a continuous fashion. Leaching of the metal catalyst at high temperatures limited the process in many perspectives. Therefore, the feasibility of a reactor setup with reversed flow was experimentally evaluated and approved.

Copper-Catalyzed Enantioconvergent Radical Suzuki-Miyaura C(sp3)-C(sp2) Cross-Coupling

A copper-catalyzed enantioconvergent Suzuki-Miyaura C(sp³)-C(sp²) cross-coupling of various racemic alkyl halides with organoboronate esters has been established in high enantioselectivity. Critical to the success is the use of a chiral cinchona alkaloid-derived N,N,P-ligand for not only enhancing the reducing capability of copper catalyst to favor a stereoablative radical pathway over a stereospecific S_N2-type process but also providing an ideal chiral environment to achieve the challenging enantiocontrol over the highly reactive radical species. The reaction has a broad scope with respect to both coupling partners, covering aryl- and heteroarylboronate esters, as well as benzyl-, heterobenzyl-, and propargyl bromides and chlorides with good functional group compatibility. Thus, it provides expedient access toward a range of useful enantioenriched skeletons featuring chiral tertiary benzylic stereocenters.

Thiosemicarbazone Complexes of Transition Metals as Catalysts for Cross-Coupling Reactions

Catalysis of cross-coupling reactions under phosphane-free conditions represents an important ongoing challenge. Although transition metal complexes based on the thiosemicarbazone unit have been known for a very long time, their use in homogeneous catalysis has been studied only relatively recently. In particular, reports of cross-coupling catalytic reactions with such complexes have appeared only in the last 15 years. This review provides a survey of the research in this area and a discussion of the prospects for future developments.

Palladium-Catalyzed Cross-Couplings by C-O Bond Activation

Although palladium-catalyzed cross-coupling of aryl halides and reactive pseudohalides has revolutionized the way organic molecules are constructed today across various fields of chemistry, comparatively less progress has been made in the palladium-catalyzed cross-coupling of less reactive C-O electrophiles. This is despite the fact that the use of phenols and phenol derivatives as bench-stable cross-coupling partners has been well-recognized to bring about major advantages over aryl halides, such as (1) natural abundance of phenols, (2) avoidance of toxic halides, (3) orthogonal cross-coupling conditions, (4) prefunctionalization of phenolic substrates by electrophilic substitution or C-H functionalization, (5) ready availability of phenols from a different pool of precursors than aryl halides. In this review, we present an overview of recent advances made in the field of palladium-catalyzed cross-coupling of C-O electrophiles with a focus on (1) catalytic systems, (2) reaction type, and (3) class of C-O coupling partners. Although the field has been historically dominated by nickel catalysis, it is now evident that the use of more versatile, more functional group tolerant and highly active palladium catalysts supported by appropriately designed ancillary ligands enables the cross-coupling with improved substrate scope and generality, and likely represents a practical solution to the broadly applicable cross-coupling of various C-O bonds across diverse chemical disciplines. The review covers the period through June 2020.

Palladium (II)-Salan Complexes as Catalysts for Suzuki-Miyaura C-C Cross-Coupling in Water and Air. Effect of the Various Bridging Units within the Diamine Moieties on the Catalytic Performance

Water-soluble salan ligands were synthesized by hydrogenation and subsequent sulfonation of salens (N,N'-bis(slicylidene)ethylenediamine and analogues) with various bridging units (linkers) connecting the nitrogen atoms. Pd (II) complexes were obtained in reactions of sulfosalans and [PdCl₄]^2-. Characterization of the ligands and complexes included extensive X-ray diffraction studies, too. The Pd (II) complexes proved highly active catalysts of the Suzuki-Miyaura reaction of aryl halides and arylboronic acid derivatives at 80 °C in water and air. A comparative study of the Pd (II)-sulfosalan catalysts showed that the catalytic activity largely increased with increasing linker length and with increasing steric congestion around the N donor atoms of the ligands; the highest specific activity was 40,000 (mol substrate) (mol catalyst × h)^-1. The substrate scope was explored with the use of the two most active catalysts, containing 1,4-butylene and 1,2-diphenylethylene linkers, respectively.

Minimalization of Metallic Pd Formation in Suzuki Reaction with a Solid-State Organometallic Catalyst

Suzuki reaction usually uses palladium (Pd) complexes to accommodate a wide range of substrates. In pursuing greener synthesis, immobilization of Pd complexes with various support materials has shown promising potential. Although this approach can give stable conversion, initially immobilized Pd ions are largely reduced to Pd⁰ aggregates and turned essentially into supported nanoparticles after use, which departs from its original intention of complex immobilization and thus hampers its activity. Herein, we immobilize noble metal ions into a spherical thiolated organosilica. This new type of catalysts can catalyze Suzuki reaction homogeneously via leaching out Pd ions and shuttling them back after the reaction. The excellent reusability attained can be attributed to minimalization of forming metallic palladium. Thus, the developed catalysts can be viewed as a two-way device to release and to restore metal ions for homogeneous catalysis.

The key role of R-NHC coupling (R = C, H, heteroatom) and M-NHC bond cleavage in the evolution of M/NHC complexes and formation of catalytically active species

Complexes of metals with N-heterocyclic carbene ligands (M/NHC) are typically considered the systems of choice in homogeneous catalysis due to their stable metal-ligand framework. However, it becomes obvious that even metal species with a strong M-NHC bond can undergo evolution in catalytic systems, and processes of M-NHC bond cleavage are common for different metals and NHC ligands. This review is focused on the main types of the M-NHC bond cleavage reactions and their impact on activity and stability of M/NHC catalytic systems. For the first time, we consider these processes in terms of NHC-connected and NHC-disconnected active species derived from M/NHC precatalysts and classify them as fundamentally different types of catalysts. Problems of rational catalyst design and sustainability issues are discussed in the context of the two different types of M/NHC catalysis mechanisms.

A one-pot protocol for the fluorosulfonation and Suzuki coupling of phenols and bromophenols, streamlined access to biaryls and terphenyls

A one-pot protocol for the fluorosulfation and Suzuki coupling of phenols is described. The tandem reaction proceeds efficiently at room temperature, and various biaryls and biaryl fluorosulfates were obtained in good to excellent yields. Furthermore, biaryl fluorosulfates were utilized as versatile building blocks for the preparation of terphenyls.

New Amphiphilic Imidazolium/Benzimidazolium Calix[4]arene Derivatives: Synthesis, Aggregation Behavior and Decoration of DPPC Vesicles for Suzuki Coupling in Aqueous Media

In this study, new types of amphiphilic calix[4]arene derivatives bearing N-alkyl/aryl imidazolium/benzimidazolium fragments were designed and synthesized by two step transformation: Regioselective Blanc chloromethylation of distal-di-O-butyl calix[4]arene and subsequent interaction with N-Substituted imidazole/benzimidazole. Critical aggregation concentration (CAC) values were estimated using pyrene fluorescent probe. Obtained macrocycles were found to form submicron particles with electrokinetic potential +44–+57 mV in aqueous solution. For the first time it was found that amphiphilic calixarene causes the fast transformation of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) multilamellar vesicles into unilamellar ones and leads to the ordering of the lipid in membranes at the molar calixarene/DPPC ratio more than 0.07. In situ complexes of calixarene aggregates with Pd(OAc)₂ were found to be active in Suzuki–Miyaura coupling of 1-bromo-4-nitrobenzene with phenylboronic acid in water. It was shown that bulky N-substituents of heterocycle decrease the catalytic activity of the aggregates. These result can be assigned to the inhibition effect of Pd(II) complex in situ formation by bulky substituents located on the aggregate surface. Embedding of the most active palladium N-heterocyclic carbene (NHC) complex with methylimidazolium headgroups into DPPC vesicles enhances its catalytic activity in Suzuki–Miyaura coupling.

Striking dual functionality of a novel Pd@Eu-MOF nanocatalyst in C(sp2)-C(sp2) bond-forming and CO2 fixation reactions

Pd nanoparticles were immobilized on a highly porous, hydrothermally stable Eu-MOF via solution impregnation and H2 reduction to yield a novel Pd@Eu-MOF nanocatalyst. This composite was characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS), inductively coupled plasma optical emission spectroscopy (ICP-OES), powder X-ray diffraction (PXRD) and X-ray photoelectron spectroscopy (XPS). Unprecedentedly, the Pd@Eu-MOF nanocatalyst could be applied with excellent results in two strikingly different, mechanistically distinct, reactions i.e., Suzuki-Miyaura cross-coupling and cycloaddition of CO2 to a range of epoxides. Under the best reaction conditions, 98-99% yields have been attained in both catalytic processes. Moreover, in either case the heterogeneous catalyst was easily recovered and efficiently reused for more than four cycles, indicating its high stability and reproducibility. PXRD, TEM and XPS measurements on the recycled catalyst confirmed that it maintained its original structure and morphology; no Pd NP agglomeration was observed.

Selective ortho-Functionalization of Adamantylarenes Enabled by Dispersion and an Air-Stable Palladium(I) Dimer

Contrary to the general belief that Pd-catalyzed cross-coupling at sites of severe steric hindrance are disfavored, we herein show that the oxidative addition to C-Br ortho to an adamantyl group is as favored as the corresponding adamantyl-free system due to attractive dispersion forces. This enabled the development of a fully selective arylation and alkylation of C-Br ortho to an adamantyl group, even if challenged with competing non-hindered C-OTf or C-Cl sites. The method makes use of an air-stable PdI dimer and enables straightforward access to diversely substituted therapeutically important adamantylarenes in 5-30 min.

Photocyclization of diarylethylenes with a boronate moiety: a useful synthetic tool to soluble PAH building blocksf

The synthesis of ten ortho-fused PAHs bearing boronic pinacol ester groups (BPin) is reported. The products are obtained via modification of Mallory photocyclization in 45-99% yields. Among them are examples of highly strained molecules such as [4]helicene derivatives with BPin substituents in the cavity. The method allows double C-C coupling and tolerates more than one BPin functionality.

Suzuki-Miyaura Coupling Enabled by Aryl to Vinyl 1,4-Palladium Migration

The Suzuki-Miyaura coupling is a fundamentally important transformation in modern organic synthesis. The development of new reaction modes for new chemical accessibility and higher synthetic efficiency is still the consistent pursuance in this field. An efficient Suzuki-Miyaura coupling enabled by a controllable 1,4-palladium migration was realized to afford stereodefined multisubstituted olefins and 1,3-dienes. The reaction exhibits remarkable broad substrate scope, excellent functional-group tolerance, versatile conversion with obtained products, and easy scalability. The practicality of this method is highlighted by the aggregation-induced emission feature of the produced olefins and 1,3-dienes, as well as the capability of affording geometric isomer pairs with a marked difference on photoluminescent quantum yield values.

Polyvinylpyridine-Supported Palladium Nanoparticles: An Efficient Catalyst for Suzuki–Miyaura Coupling Reactions

Palladium nanoparticles (Pd NPs) synthesized by the metal vapor synthesis technique were supported on poly(4-vinylpyridine) 2% cross-linked with divinylbenzene (Pd/PVPy). Transmission electron microscopy revealed the presence of small metal nanoparticles (dm = 2.9 nm) highly dispersed on the PVPy. The Pd/PVPy system showed high catalytic efficiency in Suzuki-Miyaura carbon–carbon coupling reactions of both non-activated and deactivated aromatic iodides and bromides with aryl boronic acids, carried out under an air atmosphere. The high turnover of the catalyst and the ability of the PVPy resin to retain active Pd species are highlighted. By comparing the catalytic performances of Pd/PVPy with those observed by using commercially available Pd-based supported catalysts, the reported system showed higher selectivity and lower Pd leaching.

Stable abnormal N-heterocyclic carbenes and their applications

Although N-heterocyclic carbenes (NHCs) have been known as ligands for organometallic complexes since the 1960s, these carbenes did not attract considerable attention until Arduengo et al. reported the isolation of a metal-free imidazol-2-ylidene in 1991. In 2001 Crabtree et al. reported a few complexes featuring an NHC isomer, namely an imidazol-5-ylidene, also termed abnormal NHC (aNHCs). In 2009, it was shown that providing to protect the C-2 position of an imidazolium salt, the deprotonation occurred at the C-5 position, affording imidazol-5-ylidenes that could be isolated. Over the last ten years, stable aNHCs have been used for designing a range of catalysts employing Pd(ii), Cu(i), Ni(ii), Fe(0), Zn(ii), Ag(i), and Au(i/iii) metal based precursors. These catalysts were utilized for different organic transformations such as the Suzuki-Miyaura cross-coupling reaction, C-H bond activation, dehydrogenative coupling, Huisgen 1,3-dipolar cycloaddition (click reaction), hydroheteroarylation, hydrosilylation reaction and migratory insertion of carbenes. Main-group metal complexes were also synthesized, including K(i), Al(iii), Zn(ii), Sn(ii), Ge(ii), and Si(ii/iv). Among them, K(i), Al(iii), and Zn(ii) complexes were used for the polymerization of caprolactone and rac-lactide at room temperature. In addition, based on the superior nucleophilicity of aNHCs, relative to that of their nNHCs isomers, they were used for small molecules activation, such as carbon dioxide (CO₂), nitrous oxide (N₂O), tetrahydrofuran (THF), tetrahydrothiophene and 9-borabicyclo[3.3.1]nonane (9BBN). aNHCs have also been shown to be efficient metal-free catalysts for ring opening polymerization of different cyclic esters at room temperature; they are among the most active metal-free catalysts for ε-caprolactone polymerization. Recently, aNHCs successfully accomplished the metal-free catalytic formylation of amides using CO₂ and the catalytic reduction of carbon dioxide, including atmospheric CO₂, into methanol, under ambient conditions. Although other transition metal complexes featuring aNHCs as ligand have been prepared and used in catalysis, this review article summarize the results obtained with the isolated aNHCs.

Pd–Co Nanoparticles Supported on Calcined Mg–Fe Hydrotalcites for the Suzuki–Miyaura Reaction in Water with High Turnover Numbers

We reveal the Suzuki–Miyaura reaction catalyzed by a Pd–Co nanocatalyst supported by Mg–Fe–CHT (calcined hydrotalcites). A variety of boronic acids and aryl halides were transformed into functionalized biphenyls in excellent yields using water as a solvent. The reaction could proceed under mild conditions with a simple operation and high turnover numbers. The excellent catalytic activities are reasonably attributed to the Co-doping, which forms a Pd–Co alloy on the surface of CHT.

Palladium(ii) complexes supported by PBP and POCOP pincer ligands: a comparison of their structure, properties and catalytic activity

A Pd(ii) chloride complex supported by a Yamashita-Nozaki PBP pincer ligand, [C6H4-1,2-(NCH2PtBu2)2B]PdCl (1a), was synthesized. The structure, properties and catalytic activity of complex 1a were compared with those of the corresponding POCOP pincer complex [C6H3-2,6-(OPtBu2)2]PdCl (2a). It was found that the Pd centre in complex 1a is more electron rich and easier to be oxidized than that in complex 2a; complex 1a is a much better catalyst for Suzuki-Miyaura cross-coupling reactions than complex 2a. Starting from complexes 1a and 2a, two series of Pd(ii) pincer complexes bearing a SH, BH4, N[combining low line]CS, N[combining low line]CSe or N3 covalent ligand, [C6H4-1,2-(NCH2PtBu2)2B]PdY (Y = SH, 1b; BH4; 1c; N[combining low line]CS, 1d; N[combining low line]CSe, 1e; and N3, 1f) and [C6H3-2,6-(OPtBu2)2]PdY (Y = SH, 2b; BH4, 2c; N[combining low line]CS, 2d; N[combining low line]CSe, 2e; and N3, 2f), were synthesized and fully characterized. Single crystal X-ray diffraction analysis indicated that the Pd centre is less tightly chelated in PBP pincer complexes. The strong σ-donor ability of the PBP pincer ligand has little influence on the structure of the covalent ligand possessing both σ-donor and π-acceptor properties. However, the stretching vibrational frequencies of N[combining low line]CS, N[combining low line]CSe and N3 ligands and the coordination mode of the BH4 ligand are significantly different in these two types of palladium pincer complexes.

Palladium-catalyzed decarbonylative Suzuki-Miyaura cross-coupling of amides by carbon-nitrogen bond activation

Palladium-catalyzed Suzuki-Miyaura cross-coupling or aryl halides is widely employed in the synthesis of many important molecules in synthetic chemistry, including pharmaceuticals, polymers and functional materials. Herein, we disclose the first palladium-catalyzed decarbonylative Suzuki-Miyaura cross-coupling of amides for the synthesis of biaryls through the selective activation of the N-C(O) bond of amides. This new method relies on the precise sequence engineering of the catalytic cycle, wherein decarbonylation occurs prior to the transmetallation step. The reaction is compatible with a wide range of boronic acids and amides, providing valuable biaryls in high yields (>60 examples). DFT studies support a mechanism involving oxidative addition, decarbonylation and transmetallation and provide insight into high N-C(O) bond activation selectivity. Most crucially, the reaction establishes the use of palladium catalysis in the biaryl Suzuki-Miyaura cross-coupling of the amide bond and should enable the design of a wide variety of cross-coupling methods in which palladium rivals the traditional biaryl synthesis from aryl halides and pseudohalides.

Facile synthesis of novel amino acid-like building blocks by N-alkylation of heterocyclic carboxylates with N-Boc-3-iodoazetidine

An efficient protocol providing easy access to highly functionalized heterocyclic compounds as novel organic building blocks was developed by coupling alkyl pyrazole-, indazole- and indolecarboxylates with N-Boc-3-iodoazetidine. The synthesized compounds are representatives of constrained non-chiral synthetic azole carboxylates in their N-Boc protected ester forms. Diversification of the prepared heterocyclic building blocks was achieved via application of palladium-catalyzed Suzuki-Miyaura cross-coupling reactions. In total, 34 building blocks were obtained to form a highly diversified small molecule collection. The structure of the novel heterocyclic compounds was investigated and verified by advanced NMR spectroscopy methods.