Sacrificial electron donor reagents for solar fuel production

Visible-light driven reduction of CO2 to formate by a water-soluble zinc porphyrin and formate dehydrogenase system with electron-mediated amino and carbamoyl group-modified viologen

Visible-light-driven CO₂ reduction to formate with a system consisting of water-soluble zinc porphyrin, formate dehydrogenase from Candida boidinii and 1-amino-1′-carbamoyl-4,4′-bipyridinium salt as an electron mediator in the presence of triethanolamine was developed.

Composite photocatalysts based on Cd1−xZnxS and TiO2 for hydrogen production under visible light: effect of platinum co-catalyst location

Ternary composite photocatalysts based on titania and solid solutions of CdS and ZnS were prepared and studied by a set of physicochemical methods including XRD, XPS, HRTEM, UV-vis spectroscopy, and electrochemical tests. Two synthetic techniques of platinization of Cd_1−xZn_xS/TiO₂ were compared. In the first case, platinum was deposited on the surface of synthesized Cd_1−xZn_xS (x = 0.2–0.3)/TiO₂ P25; in the second one, Cd_1−xZn_xS (x = 0.2–0.3) was deposited on the surface of Pt/TiO₂ P25. The photocatalytic properties of the obtained samples were compared in the hydrogen evolution from TEOA aqueous solution under visible light (λ = 425 nm). The Cd_1−xZn_xS (10–50 wt%; x = 0.2–0.3)/Pt (1 wt%)/TiO₂ photocatalysts demonstrated much higher photocatalytic activity than the Pt (1 wt%)/Cd_1−xZn_xS (10–50 wt%; x = 0.2–0.3)/TiO₂ ones. It turned out that the arrangement of platinum nanoparticles precisely on the titanium dioxide surface in a composite photocatalyst makes it possible to achieve efficient charge separation according to the type II heterojunctions and, accordingly, a high rate of hydrogen formation. The highest photocatalytic activity was demonstrated by 20% Cd_0.8Zn_0.2S/1% Pt/TiO₂ in the amount of 26 mmol g⁻¹ h⁻¹ (apparent quantum efficiency was 7.7%) that exceeds recently published values for this class of photocatalysts.

The determination of the preferred location of platinum particles in TiO₂–Cd_1−xZn_xS systems was carried out for the first time.

Roadmap towards solar fuel synthesis at the water interface of liposome membranes

This tutorial review describes the physical–chemical aspects one must consider when building photocatalytic liposomes for solar fuel production.

Nano-assemblies of a soluble conjugated organic polymer and an inorganic semiconductor for sacrificial photocatalytic hydrogen production from water

Nanostructured materials have interesting optical and electronic properties that are often drastically different from those of their bulk counterparts. While bulk organic/inorganic semiconductor composites have attracted much attention in the past decade, the preparation of organic/inorganic semiconductor nanocomposites (OISNs) still remains challenging. This work presents an assembly method for the co-encapsulation of titanium dioxide dots (TDs) with a cyano-substituted soluble conjugated polymer (CSCP) into a particular nanoparticle. The as-prepared CSCP/TD semiconductor nanocomposites (CSCP/TD NCs) exhibit different particle surfaces and morphologies depending on the mass ratio of the CSCP to TDs. We then tested them as photocatalysts for sacrificial hydrogen production from water. We found that nanocomposites outperformed nanoparticles of the individual components and physical mixtures thereof. The most active CSCP/TD NC had a catalytic H2 production rate that was 4.25 times higher than that of pure polymer nanoparticles prepared under the same conditions. We ascribe this to energy transfer between the semiconductors, where direct phase contact is essential, highlighting a potential avenue for using soluble, visible light-absorbing conjugated organic polymers to build Z-schemes for overall water splitting in the future.

Plasmon-induced electron injection into the large negative potential conduction band of Ga2O3 for coupling with water oxidation

In this study, an interfacial modification layer was applied to improve the plasmon-induced light energy conversion of a gallium(iii) oxide (Ga2O3) photoelectrode, which possesses a much more negative conduction band potential compared with the reduction potential of photons to hydrogen. The plasmon-induced photocurrent generation under visible light irradiation was observed with Au nanoparticle-loaded Ga2O3 (Au-NPs/Ga2O3). An interfacial modification was carried out by depositing a titanium dioxide (TiO2) thin-film layer on Au-NPs/Ga2O3via atomic layer deposition. Since the surface states of TiO2 possess excellent hole-trapping ability, this interfacial modification remarkably improved the generation of plasmon-induced photocurrent in the visible region. The photoelectric conversion efficiency of interfacially modified Au-NPs/Ga2O3 showed a TiO2 thin-film thickness dependence because the migration of hot carriers was suppressed with increasing TiO2 thickness. The Au-NPs/Ga2O3 photoelectrode modified with 2 nm-thick TiO2 showed the best photoelectric conversion performance, and the thermodynamic energy conversion efficiency under irradiation with 600 nm light was approximately two times larger than that of the Au-NPs/TiO2-thin film due to the extremely negative onset potential of Au-NPs/Ga2O3 with TiO2. Therefore, the plasmonic Ga2O3 photoanode with the interfacial TiO2 modification could provide both a high reduction ability for H2 evolution and an oxidation ability for water oxidation, because of the negative conduction band of Ga2O3 and the hole-trapping property from TiO2, respectively.

In Situ Coating CsPbBr3 Nanocrystals with Graphdiyne to Boost the Activity and Stability of Photocatalytic CO2 Reduction

The instability and low inferior catalytic activity of metal-halide perovskite nanocrystals are crucial issues for promoting their practical application in the photocatalytic field. Herein, we in situ coat a thin graphdiyne (GDY) layer on CsPbBr₃ nanocrystals based on a facile microwave synthesis method, and employ it as a photocatalyst for CO₂ reduction. Under the protection of GDY, the CsPbBr₃-based photocatalyst delivers significantly improved stability in a photocatalytic system containing water concomitant with enhanced CO₂ uptake capacity. The favorable energy offset and close contact between CsPbBr₃ and GDY trigger swift photogenerated electron transfer from CsPbBr₃ to doping metal sites in GDY, boosting a remarkable improvement in the photocatalytic performance for CO₂ reduction. Without adding traditional sacrificial reductants, the cobalt-doped photocatalyst achieves a high yield of 27.7 μmol g^-1 h^-1 for photocatalytic CO₂ conversion to CO based on water as a desirable electron source, which is about 8 times higher than that of pristine CsPbBr₃ nanocrystals.

Charge accumulation kinetics in multi-redox molecular catalysts immobilised on TiO2

Multi-redox catalysis requires the accumulation of more than one charge carrier and is crucial for solar energy conversion into fuels and valuable chemicals. In photo(electro)chemical systems, however, the necessary accumulation of multiple, long-lived charges is challenged by recombination with their counterparts. Herein, we investigate charge accumulation in two model multi-redox molecular catalysts for proton and CO2 reduction attached onto mesoporous TiO2 electrodes. Transient absorption spectroscopy and spectroelectrochemical techniques have been employed to study the kinetics of photoinduced electron transfer from the TiO2 to the molecular catalysts in acetonitrile, with triethanolamine as the hole scavenger. At high light intensities, we detect charge accumulation in the millisecond timescale in the form of multi-reduced species. The redox potentials of the catalysts and the capacity of TiO2 to accumulate electrons play an essential role in the charge accumulation process at the molecular catalyst. Recombination of reduced species with valence band holes in TiO2 is observed to be faster than microseconds, while electron transfer from multi-reduced species to the conduction band or the electrolyte occurs in the millisecond timescale. Finally, under light irradiation, we show how charge accumulation on the catalyst is regulated as a function of the applied bias and the excitation light intensity.

A Time-Resolved Spectroscopic Investigation of a Novel BODIPY Copolymer and Its Potential Use as a Photosensitiser for Hydrogen Evolution

A novel 4,4-difuoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) copolymer with diethynylbenzene has been synthesised, and its ability to act as a photosensitiser for the photocatalytic generation of hydrogen was investigated by time-resolved spectroscopic techniques spanning the ps- to ns-timescales. Both transient absorption and time-resolved infrared spectroscopy were used to probe the excited state dynamics of this photosensitising unit in a variety of solvents. These studies indicated how environmental factors can influence the photophysics of the BODIPY polymer. A homogeneous photocatalytic hydrogen evolution system has been developed using the BODIPY copolymer and cobaloxime which provides hydrogen evolution rates of 319 μmol h⁻¹ g⁻¹ after 24 h of visible irradiation.

Solar Reforming of Biomass with Homogeneous Carbon Dots

A sunlight-powered process is reported that employs carbon dots (CDs) as light absorbers for the conversion of lignocellulose into sustainable H2 fuel and organics. This photocatalytic system operates in pure and untreated sea water at benign pH (2-8) and ambient temperature and pressure. The CDs can be produced in a scalable synthesis directly from biomass itself and their solubility allows for good interactions with the insoluble biomass substrates. They also display excellent photophysical properties with a high fraction of long-lived charge carriers and the availability of a reductive and an oxidative quenching pathway. The presented CD-based biomass photoconversion system opens new avenues for sustainable, practical, and renewable fuel production through biomass valorization.

Dramatic enhancement of photocatalytic H2 evolution over hydrolyzed MOF-5 coupled Zn0.2Cd0.8S heterojunction

MOF-5 has been criticized for its poor water stability, which results in complete damage of its traditional functionality. Therefore, there are very few researches about the further application of hydrolyzed MOF-5 (h-M). However, in this work, the h-M can function as both superior support and semiconductor for photocatalytic reaction after a water-based process. Herein, a rational design of Zn_0.2Cd_0.8S@h-MOF-5 (ZCS@h-M) heterojunction photocatalyst has been synthesized via a hydrothermal method with different mass ratio of ZCS. As demonstrated in the results of SEM and TEM, during the hydrothermal process, MOF-5 exfoliated into two-dimensional small sheets and ZCS nanoparticles embedded into h-M frameworks, which is in favor for the dispersion of ZCS and better interface connection, thus further boosts the migration of photogenerated charge carriers and protect the photocorrosion of ZCS, ultimately improves the photocatalytic hydrogen production. Optimal ZCS content of 10 wt% exhibited a significantly enhanced visible light photocatalytic hydrogen production efficiency of 15.08 mmol h^-1 g^-1, which far surpassed bare ZCS at 7.62 times. Furthermore, the ZCS@h-M showed outstanding stability during photocatalytic hydrogen production over a number of cycles.

Stimuli-Responsive Resorcin[4]arene Cavitands: Toward Visible-Light-Activated Molecular Grippers

Resorcin[4]arene cavitands, equipped with diverse quinone (Q) and [Ru(bpy)₂ dppz]²⁺ (bpy=2,2'-bipyridine, dppz=dipyrido[3,2-a:2',3'-c]phenazine) photosensitizing walls in different configurations, were synthesized. Upon visible-light irradiation at 420 nm, electron transfer from the [Ru(bpy)₂ dppz]²⁺ to the Q generates the semiquinone (SQ) radical anion, triggering a large conformational switching from a flat kite to a vase with a cavity for the encapsulation of small guests, such as cyclohexane and heteroalicyclic derivatives, in CD₃ CN. Depending on the molecular design, the SQ radical anion can live for several minutes (≈10 min) and the vase can be generated in a secondary process without need for addition of a sacrificial electron donor to accumulate the SQ state. Switching can also be triggered by other stimuli, such as changes in solvent, host-guest complexation, and chemical and electrochemical processes. This comprehensive investigation benefits the development of stimuli-responsive nanodevices, such as light-activated molecular grippers.

The role of the capping agent and nanocrystal size in photoinduced hydrogen evolution using CdTe/CdS quantum dot sensitizers

Hydrogen production via light-driven water splitting is a key process in the context of solar energy conversion. In this respect, the choice of suitable light-harvesting units appears as a major challenge, particularly as far as stability issues are concerned. In this work, we report on the use of CdTe/CdS QDs as photosensitizers for light-assisted hydrogen evolution in combination with a nickel bis(diphosphine) catalyst (1) and ascorbate as the sacrificial electron donor. QDs of different sizes (1.7-3.4 nm) and with different capping agents (MPA, MAA, and MSA) have been prepared and their performance assessed in the above-mentioned photocatalytic reaction. Detailed photophysical studies have been also accomplished to highlight the charge transfer processes relevant to the photocatalytic reaction. Hydrogen evolution is observed with remarkable efficiencies when compared to common coordination compounds like Ru(bpy)₃²⁺ (where bpy = 2,2'-bipyridine) as light-harvesting units. Furthermore, the hydrogen evolution performance under irradiation is strongly determined by the nature of the capping agent and the QD size and can be related to the concentration of the surface defects within the semiconducting nanocrystal. Overall, the present results outline how QDs featuring large quantum yields and long lifetimes are desirable to achieve sustained hydrogen evolution upon irradiation and that a precise control of the structural and photophysical properties thus appears as a major requirement towards profitable photocatalytic applications.

New Photosensitizers Based on Heteroleptic CuI Complexes and CO2 Photocatalytic Reduction with [NiII (cyclam)]Cl2

Earth-abundant metal complexes have been attracting increasing attention in the field of photo(redox)catalysis. In this work, the synthesis and full characterisation of four new heteroleptic CuI complexes are reported, which can work as photosensitizers. The complexes bear a bulky diphosphine (DPEPhos=bis[(2-diphenylphosphino)phenyl] ether) and a diimine chelating ligand based on 1-benzyl-4-(quinol-2'yl)-1,2,3-triazole. Their absorption has a relative maximum in the visible-light region, up to 450 nm. Thus, their use in photocatalytic systems for the reduction of CO2 with blue light in combination with the known catalyst [NiII (cyclam)]Cl2 was tested. This system produced CO as the main product through visible light (λ=420 nm) with a TON up to 8 after 4 hours. This value is in line with other photocatalytic systems using the same catalyst. Nevertheless, this system is entirely noble-metal free.

Photo-triggered hydrogen atom transfer from an iridium hydride complex to unactivated olefins

Many photoactive metal complexes can act as electron donors or acceptors upon photoexcitation, but hydrogen atom transfer (HAT) reactivity is rare. We discovered that a typical representative of a widely used class of iridium hydride complexes acts as an H-atom donor to unactivated olefins upon irradiation at 470 nm in the presence of tertiary alkyl amines as sacrificial electron and proton sources. The catalytic hydrogenation of simple olefins served as a test ground to establish this new photo-reactivity of iridium hydrides. Substrates that are very difficult to activate by photoinduced electron transfer were readily hydrogenated, and structure-reactivity relationships established with 12 different olefins are in line with typical HAT reactivity, reflecting the relative stabilities of radical intermediates formed by HAT. Radical clock, H/D isotope labeling, and transient absorption experiments provide further mechanistic insight and corroborate the interpretation of the overall reactivity in terms of photo-triggered hydrogen atom transfer (photo-HAT). The catalytically active species is identified as an Ir(ii) hydride with an IrII-H bond dissociation free energy around 44 kcal mol-1, which is formed after reductive 3MLCT excited-state quenching of the corresponding Ir(iii) hydride, i.e. the actual HAT step occurs on the ground-state potential energy surface. The photo-HAT reactivity presented here represents a conceptually novel approach to photocatalysis with metal complexes, which is fundamentally different from the many prior studies relying on photoinduced electron transfer.

A mobile robotic chemist

Technologies such as batteries, biomaterials and heterogeneous catalysts have functions that are defined by mixtures of molecular and mesoscale components. As yet, this multi-length-scale complexity cannot be fully captured by atomistic simulations, and the design of such materials from first principles is still rare^1-5. Likewise, experimental complexity scales exponentially with the number of variables, restricting most searches to narrow areas of materials space. Robots can assist in experimental searches^6-14 but their widespread adoption in materials research is challenging because of the diversity of sample types, operations, instruments and measurements required. Here we use a mobile robot to search for improved photocatalysts for hydrogen production from water¹⁵. The robot operated autonomously over eight days, performing 688 experiments within a ten-variable experimental space, driven by a batched Bayesian search algorithm^16-18. This autonomous search identified photocatalyst mixtures that were six times more active than the initial formulations, selecting beneficial components and deselecting negative ones. Our strategy uses a dexterous^19,20 free-roaming robot^21-24, automating the researcher rather than the instruments. This modular approach could be deployed in conventional laboratories for a range of research problems beyond photocatalysis.

Aryl dechlorination and defluorination with an organic super-photoreductant

Direct excitation of the commercially available super-electron donor tetrakis(dimethylamino)ethylene (TDAE) with light-emitting diodes at 440 or 390 nm provides a stoichiometric reductant that is able to reduce aryl chlorides and fluorides. The method is very simple and requires only TDAE, substrate, and solvent at room temperature. The photoactive excited state of TDAE has a lifetime of 17.3 ns in cyclohexane at room temperature and an oxidation potential of ca.-3.4 V vs. SCE. This makes TDAE one of the strongest photoreductants able to operate on the basis of single excitation with visible photons. Direct substrate activation occurs in benzene, but acetone is reduced by photoexcited TDAE and substrate reduction takes place by a previously unexplored solvent radical anion mechanism. Our work shows that solvent can have a leveling effect on the photochemically available redox power, reminiscent of the pH-leveling effect that solvent has in acid-base chemistry.

Pyridyl-Anchored Type BODIPY Sensitizer-TiO2 Photocatalyst for Enhanced Visible Light-Driven Photocatalytic Hydrogen Production

Dye-sensitized photocatalytic hydrogen production using a boron-dipyrromethene (BODIPY) organic material having a pyridyl group at the anchor site was investigated. Phenyl, carbazole, and phenothiazine derivatives were introduced into BODIPY dyes, and their photocatalytic activities were examined. Identification was performed by nuclear magnetic resonance (NMR), infrared (IR), mass (MS) spectra, and absorption spectra, and catalyst evaluation was performed by using visible-light irradiation and photocatalytic hydrogen production and photocurrent. These dyes have strong absorption at 600–700 nm, suggesting that they are promising as photosensitizers. When the photocatalytic activity was examined, stable catalytic performance was demonstrated, and the activity of the Pt-TiO2 photocatalyst carrying a dye having a carbazole group was 249 μmol/gcat·h. Photocurrent measurements suggest that dye-sensitized photocatalytic activity is occurring. This result suggests that BODIPY organic materials with pyridyl groups as anchor sites are useful as novel dye-sensitized photocatalysts.

Time-Resolved Resonant Raman Spectroscopy of the Photoinduced Electron Transfer from Ruthenium(II) Trisbipyridine to Methyl Viologen

We report the first time-resolved resonant Raman (TR3) spectra of photoinduced charge transfer from [Ru(bpy)₃]²⁺ to methyl viologen, with observations of vibrational structure. The presence of singly charged methyl viologen in solution is noted by the appearance of several spectroscopic lines, which are visible in the spectra following subtraction of reagent molecules. Assignments are confirmed using both density functional theory (DFT) calculations and literature values and are shown to be consistent with transient absorption spectroscopy data. This presents proof-of-concept for the application of TR3 in mechanistic studies of photocatalytic systems.

Multi-Photon Excitation in Photoredox Catalysis: Concepts, Applications, Methods

The energy of visible photons and the accessible redox potentials of common photocatalysts set thermodynamic limits to photochemical reactions that can be driven by traditional visible-light irradiation. UV excitation can be damaging and induce side reactions, hence visible or even near-IR light is usually preferable. Thus, photochemistry currently faces two divergent challenges, namely the desire to perform ever more thermodynamically demanding reactions with increasingly lower photon energies. The pooling of two low-energy photons can address both challenges simultaneously, and whilst multi-photon spectroscopy is well established, synthetic photoredox chemistry has only recently started to exploit multi-photon processes on the preparative scale. Herein, we have a critical look at currently developed reactions and mechanistic concepts, discuss pertinent experimental methods, and provide an outlook into possible future developments of this rapidly emerging area.

Flavin-Conjugated Iron Oxide Nanoparticles as Enzyme-Inspired Photocatalysts for Azo Dye Degradation

In this work, a new photocatalytic system consisting of iron oxide nanoparticles (IONPs), coated with a catechol-flavin conjugate (DAFL), is synthesized and explored for use in water remediation. In order to test the efficiency of the catalyst, the photodegradation of amaranth (AMT), an azo dye water pollutant, was performed under aerobic and anaerobic conditions, using either ethylenediaminetetraacetic acid (EDTA) or 2-(N-morpholino)ethanesulfonic acid (MES) as electron donors. Depending on the conditions, either dye photoreduction or photooxidation were observed, indicating that flavin-coated iron-oxide nanoparticles can be used as a versatile enzyme-inspired photocatalysts.

Copper(I) Phosphinooxazoline Complexes: Impact of the Ligand Substitution and Steric Demand on the Electrochemical and Photophysical Properties

A series of seven homoleptic Cu^I complexes based on hetero-bidentate P^N ligands was synthesized and comprehensively characterized. In order to study structure-property relationships, the type, size, number and configuration of substituents at the phosphinooxazoline (phox) ligands were systematically varied. To this end, a combination of X-ray diffraction, NMR spectroscopy, steady-state absorption and emission spectroscopy, time-resolved emission spectroscopy, quenching experiments and cyclic voltammetry was used to assess the photophysical and electrochemical properties. Furthermore, time-dependent density functional theory calculations were applied to also analyze the excited state structures and characteristics. Surprisingly, a strong dependency on the chirality of the respective P^N ligand was found, whereas the specific kind and size of the different substituents has only a minor impact on the properties in solution. Most importantly, all complexes except C3 are photostable in solution and show fully reversible redox processes. Sacrificial reductants were applied to demonstrate a successful electron transfer upon light irradiation. These properties render this class of photosensitizers as potential candidates for solar energy conversion issues.

Photosensitizers for H2 Evolution Based on Charged or Neutral Zn and Sn Porphyrins

We report a comparison between a series of zinc and tin porphyrins as photosensitizers for photochemical hydrogen evolution using cobaloxime complexes as molecular catalysts. Among all the chromophores tested, only the positively charged zinc porphyrin, [ZnTMePyP⁴⁺]Cl₄, and the neutral tin porphyrin derivatives, Sn(OH)₂TPyP, Sn(Cl₂)TPP-[COOMe]₄, and Sn(Cl₂)TPP-[PO(OEt)₂]₄, were photocatalytically active. Hydrogen evolution was strongly affected by the pH value as well as the different concentrations of both the sensitizer and the catalyst. A comprehensive photophysical and electrochemical investigation was conducted in order to examine the mechanism of photocatalysis. The results derived from this study establish fundamental criteria with respect to the design and synthesis of porphyrin derivatives for their application as photosensitizers in photoinduced hydrogen evolution.

Convenient Synthesis of New Heterocycles Containing the Quinoxaline Ring System

:

The aim of the current article was to describe simple procedures for the synthesis of new heterocycles incorporating the quinoxaline moiety using benzene-1,2-diamine and quinoxaline-2,3- dithiol as precursors. Simple synthetic methods are described for the synthesis of new heterocycles using commercially available chemicals. Also, the new compounds were determined using analytical and spectroscopic methods including single X-ray crystal structures. A series of new heterocycles containing the quinoxaline nucleus have been synthesized in good yields using simple and convenient procedures. A process has been described for the synthesis of new heterocycles containing the quinoxaline moiety that might be difficult to synthesize by other routes.

Homogeneous catalytic transfer semihydrogenation of alkynes – an overview of hydrogen sources, catalysts and reaction mechanisms

Chemoselective semihydrogenation of alkynes to alkenes with E- or Z-stereoselectivity is among the most important transformations in the synthesis of highly functional organic building blocks.

Multi-state amine sensing by electron transfers in a BODIPY probe

Photoinduced electron transfer sets up the BODIPY probe for multi-state amine sensing by single-electron transfer then collisional quenching.

Photobiocatalytic H2 evolution of GaN:ZnO and [FeFe]-hydrogenase recombinant Escherichia coli

The need for sustainable, renewable and low-cost approaches is a driving force behind the development of solar-to-H₂ conversion technologies.

The role of leached Zr in the photocatalytic reduction of CO2 to formate by derivatives of UiO-66 metal organic frameworks

Photoreduction of CO₂ to formate by UiO-66 Zr MOF derivatives is explained by Zr leaching.

Visible light-driven, external mediator-free H2 production by a combination of a photosensitizer and a whole-cell biocatalyst: Escherichia coli expressing [FeFe]-hydrogenase and maturase genes

A new visible light-driven, external mediator-free, and highly efficient H₂ production system is developed based on the combination of a photosensitizer and a living whole-cell biocatalyst: genetically engineered Escherichia coli.

The role of photoinduced charge transfer for photocatalysis, photoelectrocatalysis and luminescence sensing in metal–organic frameworks

Understanding PCT taking place within MOFs is crucial for designing porous photo/electrocatalysts and luminescent sensors. Unique features of PCT in MOFs and recent progress along with state-of-the-art characterization methods are discussed in the context of its applications.

Efficient trinuclear Ru(ii)-Re(i) supramolecular photocatalysts for CO2 reduction based on a new tris-chelating bridging ligand built around a central aromatic ring

We have designed and synthesized a new tris-chelating polypyridine ligand (bpy₃Ph) suitable to be used as a bridging ligand (BL) for constructing various supramolecular photocatalysts.

We have designed and synthesized a new tris-chelating polypyridine ligand (bpy₃Ph) suitable to be used as a bridging ligand (BL) for constructing various supramolecular photocatalysts. This BL is a phenylene ring with three ethylene chains at 1, 3, and 5 positions, of which the other terminals are connected to 2,2′-bipyridine moieties. The ligand bpy₃Ph has been used to prepare, according to a multi-step synthetic protocol, trinuclear supramolecular photocatalysts containing different metal subunits. In particular, the compounds Ru2Re and RuRe2 have been prepared, containing different ratios of components based on Ru(dmb)₃²⁺-type and Re(dmb)(CO)₃Cl-type units (dmb = 4,4′-dimethyl-2,2′-bipyridine), which can play the roles of photosensitizers and catalyst units for photocatalytic CO₂ reduction, respectively. The trinuclear model Ru3 and mononuclear and dinuclear Ru and Ru2 precursor metal complexes, containing free chelating sites, have also been synthesized using the same bridging ligand. The absorption spectra, redox behaviour and photophysical properties of the new species indicate that there is no strong electronic interaction among the Ru and Re units. The trinuclear complexes Ru2Re and RuRe2 could photocatalyze CO₂ reduction to CO with high selectivity (up to 97%), high efficiency (Φ_COs of 28% and 25%, respectively: BIH as a reductant), and high durability (TON_COs of 5232 and 6038, respectively: BIH as a reductant) which are the largest TONs for CO₂ reduction using supramolecular photocatalysts in homogeneous solutions. The absence of negligible accumulation of the mono-reduced form of the photosensitizer indicates fast electron transfer to the catalyst unit(s) through the relatively large bridging ligand and is proposed to contribute to the outstanding photocatalytic properties of the new species, including their durability. The relevant photocatalytic behaviour of the new systems indicates new avenues for the design of extended bridging ligands capable of efficiently and functionally integrating photosensitizers and catalysts towards the preparation of new, larger supramolecular photocatalysts for selective CO₂ reduction.

A Reversible Electron Relay to Exclude Sacrificial Electron Donors in the Photocatalytic Oxygen Atom Transfer Reaction with O2 in Water

Using light energy and O₂ for the direct chemical oxidation of organic substrates is a major challenge. A limitation is the use of sacrificial electron donors to activate O₂ by reductive quenching of the photosensitizer, generating undesirable side products. A reversible electron acceptor, methyl viologen, can act as electron shuttle to oxidatively quench the photosensitizer, [Ru(bpy)₃ ]²⁺ , generating the highly oxidized chromophore and the powerful reductant methyl-viologen radical MV^+. . MV^+. can then reduce an iron(III) catalyst to the iron(II) form and concomitantly O₂ to O₂ ^.- in an aqueous medium to generate an active iron(III)-(hydro)peroxo species. The oxidized photosensitizer is reset to its ground state by oxidizing an alkene substrate to an alkenyl radical cation. Closing the loop, the reaction of the iron reactive intermediate with the substrate or its radical cation leads to the formation of two oxygenated compounds, the diol and the aldehyde following two different pathways.

A photosynthesis-inspired supramolecular system: caging photosensitizer and photocatalyst in apoferritin

Inspired by the bioinorganic structure of natural [FeFe]-hydrogenase ([FeFe]-H₂ase) that possesses iron sulfur clusters to catalyze proton reduction to hydrogen (H₂), we design a supramolecular photosystem by sequentially integrating hydrophobic ruthenium complex (as a photosensitizer) and diiron dithiolate complex (as a photocatalyst) into the inner surface or cavity of apoferritin via noncovalent interactions. This platform allows photosensitizer and catalyst to localize in a close proximity and short-distance electron transfer process to occur within a confined space. The resulted uniform core-shell nanocomposites were stable and well dispersed in water, and showed enhanced H₂ generation activity in acidic solution as compared to the homogenous system without apoferritin participation.

Reactivity control of a photocatalytic system by changing the light intensity

By using simple optics such as a lens, switching between one- and two-photon driven reaction mechanisms became feasible, which allows the control over the main products of photochemical reactions.

We report a novel light-intensity dependent reactivity approach allowing us to selectively switch between triplet energy transfer and electron transfer reactions, or to regulate the redox potential available for challenging reductions. Simply by adjusting the light power density with an inexpensive lens while keeping all other parameters constant, we achieved control over one- and two-photon mechanisms, and successfully exploited our approach for lab-scale photoreactions using three substrate classes with excellent selectivities and good product yields. Specifically, our proof-of-concept study demonstrates that the irradiation intensity can be used to control (i) the available photoredox reactivity for reductive dehalogenations to selectively target either bromo- or chloro-substituted arenes, (ii) the photochemical cis–trans isomerization of olefins versus their photoreduction, and (iii) the competition between hydrogen atom abstraction and radical dimerization processes.