Solid-phase extraction of organic compounds: A critical review (Part I)

Extraction of Metal Ions with Metal-Organic Frameworks

Metal-organic frameworks (MOFs) are crystalline porous materials composed of metal ions or clusters coordinated with organic linkers. Due to their extraordinary properties such as high porosity with homogeneous and tunable in size pores/cages, as well as high thermal and chemical stability, MOFs have gained attention in diverse analytical applications. MOFs have been coupled with a wide variety of extraction techniques including solid-phase extraction (SPE), dispersive solid-phase extraction (d-SPE), and magnetic solid-phase extraction (MSPE) for the extraction and preconcentration of metal ions from complex matrices. The low concentration levels of metal ions in real samples including food samples, environmental samples, and biological samples, as well as the increased number of potentially interfering ions, make the determination of trace levels of metal ions still challenging. A wide variety of MOF materials have been employed for the extraction of metals from sample matrices prior to their determination with spectrometric techniques.

Persistent Organic Pollutants in Food: Contamination Sources, Health Effects and Detection Methods

Persistent organic pollutants (POPs) present in foods have been a major concern for food safety due to their persistence and toxic effects. To ensure food safety and protect human health from POPs, it is critical to achieve a better understanding of POP pathways into food and develop strategies to reduce human exposure. POPs could present in food in the raw stages, transferred from the environment or artificially introduced during food preparation steps. Exposure to these pollutants may cause various health problems such as endocrine disruption, cardiovascular diseases, cancers, diabetes, birth defects, and dysfunctional immune and reproductive systems. This review describes potential sources of POP food contamination, analytical approaches to measure POP levels in food and efforts to control food contamination with POPs.

Effects of pendant-like hydrophilic monomers on the adsorption properties of reversed-phase-type sorbents for solid-phase extraction

Solid-phase extraction (SPE) has been extensively employed as a pretreatment method. In SPE, reversed-phase-type sorbents have been widely applied for the pretreatment of environmental or biological samples. Hydrophilic-lipophilic balance (HLB)-type sorbents, constituting the copolymers used as reversed-phase-type sorbents, have been applied for various sample pretreatment methods. In HLB-type sorbents, the hydrophilic monomer contributes to the improved wettability of sorbents and increase of polar interactions. In this study, three pendant-like hydrophilic monomers, viz. N-vinylpyrrolidone (NVP), 4-acryloylmorpholine (AMO), and 4-vinyl-1,3-dioxolan-2-one (VDO), respectively, exhibiting different Log P values and possibly causing different polar interactions, were selected to improve the adsorption properties of polar compounds, and divinylbenzene (DVB)-based HLB-type sorbents containing each hydrophilic monomer were synthesized and examined. By the optimization of the molar ratio of DVB and the hydrophilic monomer (i.e. HLB), the inert diluent, and the degree of cross-linking, the developed sorbents exhibited higher recoveries for various polar compounds (viz. cytosine, uracil, cytidine, uridine, 2'-deoxycytidine, 2'-deoxyguanosine, adenine, thymidine, adenosine, and 2'-deoxyadenosine) compared to commercially available HLB-type sorbents.

Hydrophilic Divinylbenzene for Equilibrium Sorption of Emerging Organic Contaminants in Aquatic Matrices

Hydrophilic divinylbenzene (DVB) (Bakerbond) has surfaced as a promising sorbent for active sampling of analytes from aqueous matrices over a very broad polarity range. Given this, hydrophilic DVB may likewise offer potential for passive sampling, if sorbent/water partitioning coefficients (K_sw) were to be available. In this work, static exposure batch experiments were performed to quantitatively study the equilibrium sorption of 131 environmentally relevant organic contaminants (P values ranging from -1.30 to 9.85) on hydrophilic DVB. The superior affinity of hydrophilic DVB, as compared to Oasis HLB, for compounds with a broad polarity range was confirmed by functional Fourier-transform infrared spectroscopy and Raman characterization, demonstrating the presence of carboxyl moieties. Concentration effects were studied by increasing compound concentrations in mixture experiments and resulted in the steroidal endocrine disrupting compounds in higher K_sw, while lower K_sw were obtained for the (alkyl)phenols, personal care products, pesticides, pharmaceuticals, and phthalates. Nevertheless, K_sw remained constant in the said design for equilibrium water concentrations at environmentally relevant seawater levels. An independent analysis of thermodynamic parameters (change in enthalpy, entropy, and Gibbs free energy) revealed the nature of the main partitioning processes. While polar (log P < 4) compounds were mainly served by physisorption, nonpolar (log P > 4) compounds also exhibited binding by multiple hydrogen bonding. In conclusion, this research facilitates the future application of hydrophilic DVB for active as well as passive sampling in the analysis of organic contaminants for monitoring purposes and for toxicity testing.

Understanding glycaemic control and current approaches for screening antidiabetic natural products from evidence-based medicinal plants

Type 2 Diabetes Mellitus has reached epidemic proportions as a result of over-nutrition and increasingly sedentary lifestyles. Current therapies, although effective, are not without limitations. These limitations, the alarming increase in the prevalence of diabetes, and the soaring cost of managing diabetes and its complications underscores an urgent need for safer, more efficient and affordable alternative treatments. Over 1200 plant species are reported in ethnomedicine for treating diabetes and these represents an important and promising source for the identification of novel antidiabetic compounds. Evaluating medicinal plants for desirable bioactivity goes hand-in-hand with methods in analytical biochemistry for separating and identifying lead compounds. This review aims to provide a comprehensive summary of current methods used in antidiabetic plant research to form a useful resource for researchers beginning in the field. The review summarises the current understanding of blood glucose regulation and the general mechanisms of action of current antidiabetic medications, and combines knowledge on common experimental approaches for screening plant extracts for antidiabetic activity and currently available analytical methods and technologies for the separation and identification of bioactive natural products. Common in vivo animal models, in vitro models, in silico methods and biochemical assays used for testing the antidiabetic effects of plants are discussed with a particular emphasis on in vitro methods such as cell-based bioassays for screening insulin secretagogues and insulinomimetics. Enzyme inhibition assays and molecular docking are also highlighted. The role of metabolomics, metabolite profiling, and dereplication of data for the high-throughput discovery of novel antidiabetic agents is reviewed. Finally, this review also summarises sample preparation techniques such as liquid-liquid extraction, solid phase extraction, and supercritical fluid extraction, and the critical function of nuclear magnetic resonance and high resolution liquid chromatography-mass spectrometry for the dereplication, putative identification and structure elucidation of natural compounds from evidence-based medicinal plants.

High through-put determination of 28 veterinary antibiotic residues in swine wastewater by one-step dispersive solid phase extraction sample cleanup coupled with ultra-performance liquid chromatography-tandem mass spectrometry

We developed a QuEChERS (quick, easy, cheap, effective, rugged and safe) method for the high through-put determination of 28 common veterinary antibiotics in swine wastewater using one-step dispersive solid-phase extraction (d-SPE) for sample cleanup and ultra-performance liquid chromatography-tandem mass spectrometry for detection. The orthogonal test method was used to systematically investigate the parameters that might influence d-SPE efficiency. The optimal d-SPE procedure utilized 40 mg primary secondary amine sorbent and 3 g L^-1 Na₂EDTA. The recoveries ranged from 50 to 100% with relative standard deviations <20% for all target analytes except for enrofloxacin and chlortetracycline. The limits of detection and limits of quantification for all the analytes ranged from 0.002 to 0.200 ng mL^-1 and 0.005-0.500 ng mL^-1, respectively. The developed method was successfully applied to the analysis of 28 antibiotic residues in swine wastewater from 10 pig farms located in central China. Fourteen antibiotics including 4 sulfonamides (sulfadiazine, sulfamerazine, sulfamonomethoxine and trimethoprim), 5 fluoroquinolones (norfloxacin, ciprofloxacin, pefloxacin, enrofloxacin, and ofloxacin), 1 lincosamide (lincomycin) and 4 tetracyclines (doxycycline, tetracycline, oxytetracycline, and chlortetracycline) were detected at levels ranging from 0.0560 to 1793 ng mL^-1. Our results demonstrated that the optimized method is a simple but reliable analytical technique for the routine monitoring of veterinary antibiotics in swine wastewater. Swine wastewater samples that we analyzed from 10 pig farms in Jiangxi Province, China were highly contaminated and pose a serious threat to ecosystems and to public health.

A metal organic framework polymer monolithic column as a novel adsorbent for on-line solid phase extraction and determination of ursolic acid in Chinese herbal medicine

A metal organic framework (MOF)-polymer monolithic column was prepared by redox initiation using modified MOF and N-methylolacrylamide (NMA) as co-monomers. The obtained monolithic column was characterized by scanning electron microscopy (SEM) and nitrogen adsorption-desorption isotherm measurement. It was used as a solid phase extraction (SPE) absorbent for the online enrichment of ursolic acid (UA) by high performance liquid chromatography. The adsorption amount of UA on the monolith was compared with that of silica gel-C18 adsorbent and the monolith without MOF material. The MOF-polymer monolithic column showed high selectivity and good permeability. Under the optimum conditions for extraction and determination, the calibration equation was y = 79.854× + 0.1939; the linear range was 0.001-0.9 mg/mL; the linear regression coefficient was 0.9993; the limit of detection (LOD) and the limit of quantification (LOQ) were 0.17 μg/mL and 0.57 μg/mL, respectively; the inter-day and intra-day accuracies were <6.44%; the recovery was in the range of 86.52-105.26%. The MOF-polymer monolithic column was successfully used as SPE column for enrichment and determination of UA in Chinese herbal medicine.

Could benthic biofilm analyses be used as a reliable proxy for freshwater environmental health?

The quality of freshwater undoubtedly reflects the health of our surrounding environment, society, and economy, as these are supported by various freshwater ecosystems. Monitoring efforts have therefore been considered a vital means of ensuring the ecological health of freshwater environments. Nevertheless, most aquatic environmental monitoring strategies largely focus on bulk water sampling for analysis of physicochemical and key biological indicators, which for the most part do not consider pollution events that occur at any time between sampling events. Because benthic biofilms are ubiquitous in aquatic environments, pollution released during sporadic events may be absorbed by these biofilms, which can act as repositories of pollutants. The aim of this study was to assess whether benthic biofilm monitoring could provide an efficient way of properly characterizing the extent of pollution in aquatic environments. Here, bulk water and benthic biofilms were sampled from three Hong Kong streams having various pollution profiles, and subsequently compared via high-resolution microscopy, metagenomic analysis, and analytical chemistry. The results indicated that biofilms were, indeed, reservoirs of environmental pollutants, having different profiles compared with that of the corresponding bulk water samples. Moreover, the results also suggested that biofilms sampled in polluted areas were characterized by a higher species richness. While the analytical testing of benthic biofilms still needs further development, the integration of chemical-pollutant profiles and biofilm sequencing data in future studies may provide unique perspectives for understanding and identifying pollution-related biofilm biomarkers.

Extraction and quantitative analysis of water by GC/MS for trace-level dimethylsilanediol (DMSD)

Dimethylsilanediol (DMSD) is related to the most important bifunctional building block for silicone oligomers and polymers, although DMSD itself is not used in any commercial applications. The environmental release of DMSD is linked to the hydrolytic degradation of other silicone materials in soil and water as DMSD is usually one of the major products. Most common extraction and quantification methods are not suitable for the analysis of trace- and ultratrace-levels of DMSD in water. This is because DMSD is highly water soluble and can readily undergo self-condensation when concentrated. In addition, DMSD may also coexist with DMSD precusors such methylsiloxanes in water. In the present study, solid-phase extraction (SPE) in combination with gas chromatography-mass spectrometry (GC/MS) without pre-column derivatization was tested for analyzing water samples for DMSD. It was found that direct analysis by GC/MS can be used for a wide range of concentrations if DMSD was extracted into a dry organic solvent. Isolute^® ENV + may be used for such extraction at higher DMSD concentrations, while Supelclean™ ENVI-Carb™ Plus was found to be better for trace and ultratrace analysis. Increased salt content in water can increase its DMSD extraction efficiency, while polarity of the eluting solvents is a determining factor for eluting efficiency. Moisture in the final extract is a detrimental factor for direct GC/MS analysis. With a proper moisture removal procedure and a suitable internal standard, coupling of SPE and direct GC/MS analysis reduces the method detection limits for DMSD to lower ppb levels. Based on field sample analysis, solvent and instrumental background, not instrumental sensitivity, was found to be the limiting factor in lowering the detection limits for this analysis.

Electrospun polymer composite nanofiber-based in-syringe solid phase extraction in tandem with dispersive liquid-liquid microextraction coupled with HPLC-FD for determination of aflatoxins in soybean

A fast method based on in-syringe solid phase extraction combined with dispersive liquid-liquid microextraction was developed for extraction of aflatoxins prior to HPLC-FD. Electrospun polyurethane nanofibers doped with graphene oxide were collected on a thin metal net sheet without using a binder, placed into a filter holder between filter papers on a syringe tip and used as an efficient adsorbent for the first time. The major parameters affecting whole extraction efficiency were investigated and optimized. Under the optimum conditions, the limits of detection and the limits of quantification were in the range of 0.09-0.15 and 0.3-0.5 µg kg-1, respectively. The linear dynamic range was 0.3-1000 µg kg-1 with determination coefficients of 0.9946-0.9965. The inter- and intra-day precisions were lower than 4.3 and 7.2%, respectively. The method was successfully applied for the determination of aflatoxins B1, B2, G1, and G2 in soybeans and satisfactory relative recoveries of 76-101% were achieved.

Graphene oxide-Fe3O4 nanocomposite magnetic solid phase extraction followed by UHPLC-MS/MS for highly sensitive determination of eight psychoactive drugs in urine samples

Graphene oxide-Fe₃O₄ (GO-Fe₃O₄) nanocomposite was synthesized by a facile chemical co-precipitation method. The GO-Fe₃O₄ was used as magnetic sorbent to extract the eight psychoactive drugs from urine samples. The analytes are morphine (MOR), 6-monoacetylmorphine (6-MAM), amphetamine (AMP), methamphetamine (MAMP), codeine, cocaine, dolantin and benzoylecgonine (BZE), which were determined by ultrahigh performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS). This method has high selectivity for the target analytes. The limit of detection (LOD) and limit of quantification (LOQ) were 0.02-0.2 μg L^-1 and 0.05-0.5 μg L^-1, respectively. The Mandel's fitting test revealed good linearity within all linear ranges. The linear ranges were calculated as 0.05-1000 μg L^-1 for AMP, MAMP, cocaine and dolantin; 0.1-1000 μg L^-1 for 6-MAM and codein; and 0.5-1000 μg L^-1 for MOR and BZE. The recoveries ranged in 80.4-105.5%. The intra-day and inter-day RSDs are in the range of 2.7-13.1% and 3.9-13.7%, respectively. Magnetic solid phase extraction (MSPE) with GO-Fe₃O₄ provides a convenient, rapid and green sample pretreatment method for extracting the target psychoactive drugs from urine. This methodology can be used for simultaneous or individual detection of eight major psychoactive drugs with high sensitivity. This method has high potential in clinical and forensic areas for psychoactive drugs analysis.

Metal-Organic Frameworks for Food Safety

Food safety is a prevalent concern around the world. As such, detection, removal, and control of risks and hazardous substances present from harvest to consumption will always be necessary. Metal-organic frameworks (MOFs), a class of functional materials, possess unique physical and chemical properties, demonstrating promise in food safety applications. In this review, the synthesis and porosity of MOFs are first introduced by some representative examples that pertain to the field of food safety. Following that, the application of MOFs and MOF-based materials in food safety monitoring, food processing, covering preservation, sanitation, and packaging is overviewed. Future perspectives, as well as potential opportunities and challenges faced by MOFs in this field will also be discussed. This review aims to promote the development and progress of MOF chemistry and application research in the field of food safety, potentially leading to novel solutions.

Direct in situ labeling of target drugs with a fluorophore probe to improve MALDI-MS detection sensitivity in micro-liter plasma

Nonsteroidal anti-inflammatory drugs (NSAIDs) are widely used for symptomatic relief from fever, inflammation, and chronic pain associated with a variety of human disorders. Long-term usage of these drugs can result in severe syndromes; hence, their dose should be controlled carefully and their side effects such as Stevens–Johnson syndrome, toxic epidermal necrolysis, phototoxicity, acute interstitial nephritis, gastrointestinal bleeding, cardiovascular diseases, and liver injury should be considered. Furthermore, the widely used combination of NSAIDs as over-the-counter (OTC) drugs with other drugs leads to adverse drug–drug interactions. Therefore, development of a throughput method to rapidly screen 20 NSAIDs in biological samples is necessary to safeguard human health. In this work, we selected a suitable fluorophore probe coupled with in situ micro-labeling (<2 min) on stainless plate for the fast detection of NSAIDs in plasma samples at the micro-liter level (5 μL) without complicated sample preparation and separation. Every step undertaken in the protocol was also at the micro-liter level; thus, a small amount of blood collected from the human finger will suffice to determine the drug concentration in blood using the proposed method. Furthermore, the proposed method we developed was also matched the modern trends of green analytical chemistry towards miniaturization of analytical methodologies.

Aminomethylated Calix[4]resorcinarenes as Modifying Agents for Glycidyl Methacrylate (GMA) Rigid Copolymers Surface

Functionalization of tetrapropylcalix[4]resorcinarene, tetrapentylcalix[4]resorcinarene, tetranonylcalix[4]resorcinarene, and tetra-(4-hydroxyphenyl)calix[4]resorcinarene by means of aminomethylation reactions with the amino acids β-alanine and l-proline in the presence of aqueous formaldehyde was carried out. When β-alanine was used, the reaction products were tetrabenzoxazines. The reaction with tetra-(4-hydroxyphenyl)calix[4]resorcinarene did not proceed under the experimental conditions; therefore, l-proline was used, and the corresponding tetra-Mannich base was regio- and diasteroselectively formed. The products were characterized via FT-IR, ¹H NMR, ¹³C NMR, and elemental analysis. With these aminomethylated-calix[4]resorcinarenes, the chemical surface modification of the copolymers poly(GMA-co-EDMA) and poly(BMA-co-EDMA-co-MMA) in a basic medium was studied. The results were quite satisfactory, obtaining the corresponding copolymers functionalized by nucleophilic substitution reaction and ring-opening between the carboxyl group of the upper rim of aliphatic calix[4]resorcinarenes and the hydroxyl group of the lower rim in the aromatic calix[4]resorcinarene and the epoxy group of the glycidyl methacrylate residue of each copolymer. The modified copolymers were characterized via FT-IR, scanning electron microscopy imaging, and elemental analysis. Finally, the modified copolymer surfaces exhibited interaction with peptides, showing their potential application in chromatographic separation techniques such as high-performance liquid chromatography.

Mass-balance-model-based evaluation of sewage treatment plant contribution to residual pharmaceuticals in environmental waters

In this study, a total of 52 pharmaceuticals in the influent and effluent of two sewage treatment plants (STPs) and in the receiving waters were quantified with an analytical method using on-line solid phase extraction coupled to liquid chromatograph-tandem mass spectrometry. 36 out of the 52 pharmaceuticals were detected in the influent and effluent of the STPs at quantifiable levels; influent and effluent concentrations ranged 1 ng L^-1 to 30 μg L^-1 and 3 ng L^-1 to 3 μg L^-1, respectively. They were also detected from the receiving waters (both tributaries and main river); their concentrations ranged from 1 to 310 ng L^-1. A simple mass balance model was applied for the pharmaceutical data measured for the STPs, tributaries, and the main river to demonstrate the contribution of the STPs to the pollution of the streams and the main river. The average ratio of the model estimations and the measured concentrations was calculated 97% for the downstream of the STPs, while that for the main river was 89%. This modeling result clearly demonstrates that many pharmaceuticals flowing into an STP are not degraded and discharged to a nearby river, affecting the whole water body, and that the STP is the only source of the pollutants. While their discharge into STPs should be avoided. In addition, development of new technologies capable of completely degrading them is desirable.

A magnetized fungal solid-phase extractor for the preconcentrations of uranium(VI) and thorium(IV) before their quantitation by ICP-OES

The fungus Bovista plumbea immobilized on γ-Fe₂O₃ nanoparticles is shown to be a novel sorbent for magnetic solid-phase extractions of U(VI) and Th(IV). The biosorbent was characterized by FT-IR, SEM, and EDX. The effects of pH value, flow rate and volume of sample, amounts of biomass and support material, eluent type, foreign ions and repeated use of the sorbent on extraction efficiency were investigated. The sorption capacities are 41 and 44 mg g^-1, respectively, for U(VI) and Th(IV). The results indicated that B. plumbea immobilized onto γ-Fe₂O₃ nanoparticles can be utilized as a novel material for the preconcentrations of U(VI) and Th(IV) in certified materials and in spiked tap, river and lake waters. Graphical abstract Schematic presentation of a method for preconcentrations of Th(IV) and U(VI) ions using γ-Fe₂O₃ nanoparticles loaded with the fungus Bovista plumbea.

Peptide enrichment by ion-pair solid-phase extraction

The technique of Solid-Phase Extraction (SPE) is widely used in various fields to concentrate samples and the search for tools to improve recoveries remains of outmost importance. The use of polymer based cartridges has become prevailing in a broad range of fields to enrich peptides from biological matrices. However, the existing SPE protocols are characterized by disparity. Ion-pairing (IP) reagents are commonly used in chromatographic applications, but their combination with SPE is less known. The aim of this study was to evaluate various SPE loading conditions, including the use of IP reagents, to improve the recoveries of nine selected peptide molecules. Control of pH and the use of IP reagents were found to be crucial to improve the enrichment of the peptides, especially cationic peptides, for which an up to ten-fold increase was observed. The practical potential of the presented theoretical findings were verified by employing IP-SPE for the development of an efficient extraction method for the doping relevant peptide Synacthen. The general proof of principle was obtained by analysis of excretion study urine samples and validation was performed with focus on the limit of detection (20 pg/ml) and recovery (37%).

An online field-assisted micro-solid-phase extraction device coupled with high-performance liquid chromatography for the direct analysis of solid samples

Herein, a total online device based on field-assisted extraction (FAE), micro-solid-phase extraction (μ-SPE), and high-performance liquid chromatography (HPLC) was designed. Solid samples were pretreated with ultrasound-microwave synergic effects, and then the extract was cleaned up online with a monolithic column, followed by HPLC analysis. The cross-actions between ultrasound and microwave along with other extraction parameters were studied systematically. The efficiency of this online method was verified in the determination of polycyclic aromatic hydrocarbons (PAHs) in foods and tetracycline antibiotics (TCAs) in cosmetic samples. The detection limits of nine PAHs including fluorene, phenanthrene, anthracene, fluoranthene, benzo[k]fluoranthene, benz[a]anthracene, benzo[b]fluoranthene, pyrene, and benzo[a]pyrene were all within 0.075-0.30 μg/kg, as well as four TCAs including oxytetracycline, tetracycline, chlortetracycline, and doxycycline were within 0.02-0.06 μg/kg. Six PAHs were found in roast potatoes and baked fish and the recoveries were in the range of 71.5-119.7% with RSDs of 0.2-10.9% (n = 3). The recoveries for TCAs in cosmetic samples were in the range of 75.3-118.0% with RSDs lower than 8.2% (n = 3). Compared with those offline methods, this total online FAE-μ-SPE-HPLC method not only simplifies the operation process, but also increases the precision and accuracy. Beyond trace analytes analysis in solid and semi-solid matrixes, application of this total online analysis method can also be extended to investigate field-assisted extraction mechanisms. Graphical abstract.

The pre-separation of oxygen containing compounds in oxidised heavy paraffinic fractions and their identification by GC-MS with supersonic molecular beams

The heavy petroleum fractions produced during refining processes need to be upgraded to useable products to increase their value. Hydrogenated heavy paraffinic fractions can be oxidised to produce high value products that contain a variety of oxygenates. These heavy oxygenated paraffinic fractions need to be characterised to enable the control of oxidation processes and to understand product properties. The accurate identification of the oxygenates present in these fractions by electron ionisation (EI) mass spectrometry is challenging due to the complexity of these heavy fractions. Adding to this challenge is the limited applicability of EI mass spectral libraries due to the absence of molecular ions from the EI mass spectra of many oxygenates. The separation of oxygenates from the complex hydrocarbon matrix prior to high temperature GC-MS (HT-GC-MS) analysis reduces the complexity of these fractions and assists in the accurate identification of these oxygenates. Solid phase extraction (SPE) and supercritical fluid chromatography (SFC) were employed as prefractionation techniques. GC-MS with supersonic molecular beams (SMBs) (also named GC-MS with cold-EI) utilises a SMB interface with which EI is done with vibrationally cold sample compounds in a fly-through ion source (cold-EI) resulting in a substantial increase in the molecular ion signal intensity in the mass spectrum. This greatly enhances the accurate identification of the oxygenates in these fractions. This study investigated the ionisation behaviour of oxygenated compounds using cold-EI. The prefractionation by SPE and SFC and the subsequent analysis with GC-MS with cold-EI were applied to an oxygenated heavy paraffinic fraction.

Dispersive Solid Phase Extraction Using Magnetic Nanoparticles Performed in a Narrow-Bored Tube for Extraction of Atorvastatin, Losartan, and Valsartan in Plasma

Purpose: In this investigation, a new version of magnetic solid phase extraction (MSPE) performed in a narrow–bore tube has been proposed. In this study, hydrophobic octyl (C₈) functionalized Fe₃O₄ magnetic nanoparticles (MNPs) stabilized by SiOH groups (Fe₃O₄@SiO₂@C₈) are used as magnetic nano–sorbents for the extraction of cardiovascular drugs from human plasma prior to their determination by high performance liquid chromatography–photodiode array detection.

Methods: After precipitation of the plasma proteins, the supernatant is diluted with deionized water and filled into the narrow–bore tube. Then mg–level of the sorbent is added into the tube. The sorbent is dispersed and moved down through the solution instead of passing the solution from the cartridge. Using an external magnet, the collected nano–sorbents at the bottom of the tube are transferred on top of the solution and released to move down through the solution for three times to increase the extraction efficiency.

Results: The linearity of the assay was ranging from 0.4–500 mg mL^-1. The limits of detection and quantification of the method were obtained in the ranges of 0.05–0.07 and 0.16–0.24 mg L^-1, respectively. The extraction recoveries were obtained in the range of 31–49%. Intra– and inter–day precisions were calculated and obtained in the ranges of 5–8 and 7%–9% for 0.5 mg L^-1 of each analyte, and 5–6 and 6%–8% for 2 mg L^-1 of each analyte, respectively.

Conclusion: The proposed method was successfully used in determination of the studied drugs in patient’s plasmas.

Design of selective molecularly imprinted sorbent for the optimized solid-phase extraction of S-pramipexole from the model multicomponent sample of human urine

The objective of this article was to design the selective molecularly imprinted sorbent dedicated to the solid-phase extraction of S-pramipexole from the complex matrix such as human urine. For that purpose, S-2,6-diamino-4,5,6,7-tetrahydrobenzothiazole was used as the template acting as the structural analog of S-pramipexole and five various monomers were employed in the presence of ethylene glycol dimethacrylate to produce molecularly imprinted polymers. The binding capabilities of resulted polymers revealed that the highest imprinting effect was noted for polymer prepared from the itaconic acid. The comprehensive analysis of morphology and the characterization of binding sites showed not only negligible differences in the extension of surfaces of imprinted and nonimprinted polymers but also higher heterogeneity of binding sites in the imprinted material. Comprehensive optimization of the molecularly imprinted solid-phase extraction allowed to select the most appropriate solvents for loading, washing, and elution steps. Subsequent optimization of mass of sorbent and volumes of solvents allowed to achieve satisfactory total recoveries of S-pramipexole from the model multicomponent real sample of human urine that equals to 91.8 ± 3.2% for imprinted sorbent with comparison to only 37.1 ± 1.1% for Oasis MCX.

Environmental monitoring and risk assessment of pesticide residues in surface waters of the Louros River (N.W. Greece)

Estuarine environments are being constantly stressed by new sources of pollution (e.g. pesticides) derived from activities of industry and intensive agriculture. The present study aims at quantify pesticides of three different categories (fungicides, herbicides and insecticides) in the Louros River (Epirus region, North-Western Greece). A monitoring study of 34 compounds was carried out in surface river waters from June 2011 until May 2012. Seven water sampling stations were established and 35 water samples were collected. A solid-phase extraction (SPE) method coupled with gas chromatography-mass spectrometry (GC-MS) and liquid chromatography-mass spectrometry (LC-MS), depending on the compound, was developed and validated. During the monitoring study 25 pesticides were detected (13 herbicides, 9 insecticides, 3 fungicides). The most commonly encountered pesticides were quizalofop-ethyl, trifluralin and pendimethaline. Tebufenpyrad was found in all sampling stations and seasons, with the highest concentrations of 0.330 μg/L at Tsopeli Lagoon exceeding the rather low concentrations reported nationwide. Regarding the environmental risk due to the presence of target compounds in surface waters, this was estimated by calculating risk quotients (RQs) for different aquatic organisms (algae, zooplankton and fish). The results denoted a possible threat for the aquatic environment, rendering in this way the RQ method as a useful screening tool. In any case, further extensive study is needed for acetochlor, pirimiphos-methyl, endosulfan-a and azinphos-ethyl in order to better correlate their occurrence and potential toxic effects in aquatic life and humans.

Solid-phase extraction of estrogens and herbicides from environmental waters for bioassay analysis-effects of sample volume on recoveries

Ecotoxicological screening of surface waters can involve multiple analyses using multiple bioassay and chemical analytical methods that require enriched samples to reach low concentrations. Such broad screening of the same sample necessitates sufficient sample volume-typically several liters-to produce a sufficient amount of enriched sample. Often, this is achieved by performing parallel solid-phase extractions (SPE) where extracts are combined into a pool-this is a laborious process. In this study, we first validated our existing SPE method for the chemical recovery of an extended set of compounds. We spiked four estrogenic compounds and 11 herbicides to samples from independent rivers (1 L) and wastewater treatment plant effluents (0.5 L). Then, we investigated the effect of increased sample loading of the SPE cartridges on both chemical and biological recoveries by comparing the validated volumes with four times larger sample volumes (i.e., 4 L river water and 2 L effluent). Samples were analyzed by LC-MS/MS and three bioassays: an estrogen receptor transactivation assay (ERα-CALUX), the combined algae test, and a bacterial bioluminescence inhibition assay. Our existing SPE method was found to be suitable for enriching the extended set of estrogens and herbicides in river water and effluents with near to perfect chemical recoveries (~ 100%), except for the herbicide metribuzin (46 ± 19%). In the large volume river and effluent samples, the biological activities and concentrations of the spiked compounds were between 87 and 104% of those measured with the lower sample loading, which is adequate. In addition, the ratio between the large and original volume SPE method for the non-target endpoint (bacterial bioluminescence inhibition) was acceptable (on average 82 ± 9%). Results indicate that our current water extraction method can be applied to up to four times larger sample volumes, resulting in four times more extract volumes, without significant reductions in recoveries for the tested estrogens and herbicides. Graphical abstract ᅟ.

Current Trends in Fully Automated On-Line Analytical Techniques for Beverage Analysis

The determination of target analytes in complex matrices such as beverages requires a series of analytical steps to obtain a reliable analysis. This critical review presents the current trends in sample preparation techniques based on solid phase extraction miniaturization, automation and on-line coupling. Techniques discussed include solid-phase extraction (SPE), solid-phase microextraction (SPME), in-tube solid-phase microextraction (in-tube SPME) and turbulent-flow chromatography (TFC). Advantages and limitations, as well as several of their main applications in beverage samples are discussed. Finally, fully automated on-line systems that involve extraction, chromatographic separation, and tandem mass spectrometry in one-step are introduced and critically reviewed.

Molecularly imprinted polymers for the detection of benomyl residues in water and soil samples

Benomyl is a benzimidazol fungicide used against various crop pathogens. Although banned in many countries, it is still widely used worldwide and is listed in different monitoring programs among the substances to be monitored to assess human exposure to pesticide residues. The assessment of benomyl is mainly based on the analysis of the residues of its most important metabolite, carbendazim. Existing methods often lack of selectivity and display a limited performance because of the presence of co-extracted compounds. Molecularly imprinted polymers (MIPs) offer an alternative methodology, adsorbing preferentially those target molecules for which the polymers are specifically prepared. In this study, we optimized the synthesis of a polymer imprinted with benomyl. Tests of specificity recognition showed a good performance for carbendazim compared with other similar pesticides. The mean recovery of benomyl (measured as carbendazim) from water samples was estimated to be 90% for MIPs while with real soil samples collected in Morocco the recovery efficiency was 62%. Preliminary tests also suggest that this MIP can implement traditional SPE techniques for assessing benomyl residual concentrations in environmental samples.

Development of a Highly Sensitive Direct Competitive Fluorescence Enzyme Immunoassay Based on a Nanobody-Alkaline Phosphatase Fusion Protein for Detection of 3-Phenoxybenzoic Acid in Urine

3-Phenoxybenzoic acid (3-PBA) is a human urinary metabolite of many pyrethroid insecticides and can be used as a biomarker to monitor human exposure to these pesticides. A rapid and sensitive direct competitive fluorescence enzyme immunoassay (dc-FEIA) for detecting 3-PBA on the basis of a nanobody (Nb)-alkaline phosphatase (AP) fusion protein was developed. The anti-3-PBA Nb-AP fusion protein was expressed and purified. The 50% inhibitory concentration (IC₅₀) and linear range of dc-FEIA were 0.082 and 0.015-0.447 ng/mL, respectively, with a detection limit of 0.011 ng/mL. The IC₅₀ of dc-FEIA was improved by nearly ten times compared with those of one-step and three-step direct competitive enzyme-linked immunosorbent assay (dc-ELISA). Spiked urine samples were detected by both dc-FEIA and liquid chromatography-mass spectrometry (LC-MS), and the results showed good consistency between the two analysis methods, indicating the reliability of dc-FEIA based on the Nb-AP fusion protein for detecting 3-PBA in urine.

Melamine Sponge Functionalized with Urea-Formaldehyde Co-Oligomers as a Sorbent for the Solid-Phase Extraction of Hydrophobic Analytes

A new procedure for the functionalization of melamine sponge (MeS) with urea-formaldehyde (UF) co-oligomers is put forward. The procedure differs from the typical synthesis of the UF co-polymer, as it employs a base-catalyzed condensation step at certain concentrations of urea and formaldehyde. The produced melamine-urea-formaldehyde (MUF) sponge cubes are hydrophobic, despite the presence of hydrophilic groups in the oligomers. The MUF sponge developed herein is used as a sorbent for the solid-phase extraction of 10 analytes, from 6 different classes (i.e., non-steroidal anti-inflammatory drugs, benzophenones, parabens, phenols, pesticides and musks) and an analytical method is developed for their liquid chromatographic separation and detection. Low limits of quantification (0.03 and 1.0 μg L-1), wide linear ranges and excellent recoveries (92⁻100%) are some of the benefits of the proposed procedure. The study of the synthesis conditions of MUF cubes reveals that by altering them the hydrophilic/lipophilic balance of the MUF cubes can be tuned, hinting towards a strong potential for many other applications.