Efficient heavy metal removal from industrial melting effluent using fixed-bed process based on porous hydrogel adsorbents

A combined system of microwave-functionalized rice husk and poly-aluminium chloride for trace cadmium-contaminated source water purification: Exploration of removal efficiency and mechanism

Cadmium is highly poisonous to mammals and related water pollution incidents are increasing world-widely. Here, the clean-up of trace Cd(II) by a combined process of microwave-functionalized rice husk (RH_MW-M) and poly aluminium chloride (PAC) was investigated for the first time, with the exploration of removal mechanism and efficacy. Microwave irradiation was found to be a new approach to achieve the functionalized procedure, which could decrease the processing time from 2.5 h to 390 s with the Cd(II) uptake of the outcome product soaring from 137.16 mg/g to 191.32 mg/g. The ultra-rapidly prepared RH_MW-M exhibited a fast adsorption equilibrium within 30 min over a wide pH range of 5.0-8.0, and the FT-IR and XPS studies confirmed that both ion exchange and chelation were functioned in the Cd(II) uptake process. Controlled by the turbidity threshold of drinking water treatment plant, the feasible dosage of RH_MW-M in the absence and presence of 30 mg/L PAC increased from 30 to 760 mg/L, which could effectively deal with the trace Cd(II) at the concentration from 33 μg/L up to 0.933 mg/L, exhibiting much better performance than traditional alkali precipitation. Predictably, this simple and scalable RH_MW-M/PAC system could afford a promising end-of-pipe solution for heavy-metal contamination.

Phase-Mediated Heavy Metal Adsorption from Aqueous Solutions Using Two-Dimensional Layered MoS2

An understanding of the impacts regarding different phases of inorganic materials on heavy metal removal is indispensable, owing to the intrinsic structure of materials that can affect its properties. In this study, the distinct adsorption behaviors of heavy metals (Pb(II) and Cu(II)) on different phases of MoS₂ (metallic phase (1T) and semiconducting phase (2H)) were theoretically and experimentally investigated. According to the computational results, both Pb(II) and Cu(II) have formed more stable complexes on 1T-MoS₂ compared to those on 2H-MoS₂ due to the lower adsorption energy (E_ad). This phenomenon indicates that Pb(II) and Cu(II) were more preferably adsorbed onto 1T-MoS₂. Based on the results of the computational studies, two-dimensional (2D) MoS₂ nanosheets with identical 1T and 2H phases were synthesized via a facile hydrothermal reaction. As we surmised, 1T-MoS₂ achieved excellent Pb(II) and Cu(II) adsorption capacities, which were 147.09 and 82.13 mg/g at 298 K, respectively, compared to those of 2H-MoS₂ (i.e., 64.16 and 50.74 mg/g at 298 K). Moreover, 1T-MoS₂ has shown other superior properties, such as (i) ultrafast adsorption kinetics and (ii) great anti-interference activity toward other existing cations, compared to 2H-MoS₂. Extensive computations and characterizations of MoS₂-Pb and -Cu adsorption complexes illustrated that the active S sites were indispensable for heavy metal adsorption. Overall, for the first time, we provide evidence that 1T-MoS₂ is more functional in heavy metal removal compared to 2H-MoS₂, which can guide and expand the applications of MoS₂-based adsorbents in environmental remediation.

Fate of environmental pollutants

This annual review covers the literature published in 2018 on topics related to the occurrence and fate of environmental pollutants in wastewater. Due to the vast amount of literature published on this topic, we have discussed only a portion of the quality research publications, due to the limitation of space. The abstract search was carried out using Web of Science, and the abstracts were selected based on their relevance. In a few cases, full-text articles were referred to understand new findings better. This review is divided into the following sections: antibiotic-resistant bacteria (ARBs) and antibiotic-resistant genes (ARGs), disinfection by-products (DBPs), drugs of abuse (DoAs), estrogens, heavy metals, microplastics, per- and polyfluoroalkyl compounds (PFAS), pesticides, and pharmaceuticals and personal care products (PPCPs), with the addition of two new classes of pollutants to previous years (DoAs and PFAS).

Rice husk derived double network hydrogel as efficient adsorbent for Pb(II), Cu(II) and Cd(II) removal in individual and multicomponent systems

In this study, lignin extracted from rice husk was used to synthesis double network hydrogel adsorbent, named RH-CTS/PAM gel. RH-CTS/PAM gel exhibited macroporous structure and high buried water content, which gave rise to the exceptional adsorption performance. As results, in individual systems, the equilibrium time of Pb(II), Cu(II) and Cd(II) with initial concentration of 200 mg/L could be reached within 10 min, with the theoretical maximum adsorption capacity of 374.32, 196.68 and 268.98 mg/g, respectively. The adsorption rate and capacity of Pb(II), Cu(II) and Cd(II) in multicomponent systems were lower than that of individual systems. However, in a few cases of ternary system, higher adsorption rate and capacity was observed compare to binary systems. Adsorption mechanism indicated that both oxygen-containing and nitrogen-containing functional groups played a dominant role during the adsorption process, and mainly through chemical interaction along with a small amount of physical interaction.

A facile hydrothermal method-fabricated robust and ultralight weight cellulose nanocrystal-based hydro/aerogels for metal ion removal

Heavy metal ion contamination, in particular that associated with Pb²⁺, Cd²⁺, and Cu²⁺, poses a considerable threat to aquatic environments and human health. To obtain a highly efficient adsorbent, in this work, a facile hydrothermal method was applied to prepare acrylic acid grafted onto cellulose nanocrystal (AA-g-CNC) hydro/aerogel as an adsorbent for Pb²⁺, Cd²⁺, and Cu²⁺ removal. The obtained AA-g-CNC hydrogels withstood up to 0.821 MPa of compression and showed good reciprocating performance when the deformation reached 40%. The as-formed AA-g-CNC aerogels had highly porous honeycomb structure, with many functional groups and a high zeta potential, all of which are essential features for an effective adsorbent. The maximum Pb²⁺, Cd²⁺, and Cu²⁺ removal capacities of AA-g-CNC aerogels reached 1026, 898.8, and 872.4 mg/g respectively. Their adsorption followed the Freundlich isotherm model and fitted well with pseudo-second-order kinetic models. The adsorption mechanism mainly attributed to electrostatic chelation between metal ions with sulfonate and carboxylate groups.

Synthesis of Positively Charged Polystyrene Microspheres for the Removal of Congo Red, Phosphate, and Chromium(VI)

Uniform positively charged polystyrene microspheres were synthesized and further examined as a new sorbent for water remediation. The structures of the resulting sorbent were characterized by field-emission scanning electron microscopy, Fourier transform infrared spectroscopy, and ¹H nuclear magnetic resonance spectroscopy. The adsorption performance of the sorbent was evaluated using three typical pollutants, namely, Congo red, phosphate, and Cr(VI). The adsorption isotherms were fitted by the Langmuir and Freundlich models, while the adsorption kinetics was analyzed by the pseudo-first-order, pseudo-second-order, and intraparticle diffusion equations. The thermodynamic parameters of the adsorption process including changes of enthalpy, entropy and Gibbs free energy, and binding constant were obtained by isothermal titration calorimetry measurements. The effects of solution pH and competitive ions on the adsorption process were investigated. The adsorption isotherms could be better fitted by the Langmuir model, yielding maximum adsorption capacities of 18, 6.2, and 1.1 mg g^-1 for the adsorption of Congo red, Cr(VI), and phosphate, respectively. The adsorption kinetics could be best described by the pseudo-second-order equation. The spent sorbent was regenerated by washing with 1 M KOH and showed outstanding long-term cyclic performance. The findings suggested that the positive charges at the surface of polystyrene microspheres could serve as effective sites for the immobilization of anionic pollutants in solutions owing to the electrostatic attraction.

Dye removal by eco-friendly physically cross-linked double network polymer hydrogel beads and their functionalized composites

Hydrogels have attracted large attention in wastewater treatment fields due to their low-cost and good interaction with pollutants, among which novel double network hydrogel is an outstanding class. To expand the application of double network hydrogel in water treatment, in this study, eco-friendly physically cross-linked double network polymer hydrogel beads (DAP) are prepared and studied in depth on the mechanism of Methylene Blue (MB) adsorption; and then the polymer hydrogels are further functionalized by inorganic materials. MB adsorption on DAP favors alkaline condition which is due to the increase of electrostatic attraction and adsorption site, and it reaches equilibrium within 10 hr, which is faster than that of the single network hydrogel beads (SAP). Through thermodynamics study, the process shows to be an exothermic and spontaneous process. The adsorption isotherms are well fitted by Langmuir model, with a maximum monolayer adsorption capacity of 1437.48 mg/g, which is larger than SAP (1255.75 mg/g). After being functionalized with common inorganic materials including activated carbon, Fe₃O₄ and graphene oxide (GO), the composites show to have larger pore sizes and have obvious increases in adsorption capacity especially the one contains GO. Then the composites contains Fe₃O₄ are used as heterogeneous Fenton catalyst which shows to have excellent performance in MB degradation. The results indicate the potential of polymer double network to be functionalized in environmental areas.

Microalgae biochar-derived carbon dots and their application in heavy metal sensing in aqueous systems

This research seeks a coupled solution for managing the large amounts of biochar produced by microalgae biofuel production, and the necessity for novel, economic and accurate heavy metal sensing methods. Therefore, this study evaluated the transformation of microalgae biochar (MAB) into carbon dots (Cdots) and their subsequent application as heavy metal ion sensors in aqueous systems. The experimental phase included the transformation of MAB into microalgae biochar-derived carbon dots (MAB-Cdots), MAB-Cdot characterisation and the evaluation of the MAB-Cdots as transducers for the detection of four heavy metal ions (Pb²⁺, Cu²⁺, Cd²⁺, and Ni²⁺). MAB-Cdot fluorescence was stable over a wide range of pH and resistant to photo-bleaching, making them suitable as fluorescence probes. The MAB-Cdot fluorescence was quenched by all of the metal ions and displayed different quenching levels. Depending upon the ions involved, MAB-Cdots were used to detect the presence of heavy metal ions from concentrations of 0.012 μM up to 2 mM by measuring the reduction in fluorescence intensity. Neutral and slightly alkaline pHs were optimal for Cu²⁺ Ni²⁺ and Pb²⁺ heavy metal quenching. To quantify the concentration of the heavy metal ions, linear and logarithmic functions were used to model the MAB-Cdot fluorescence quenching. The sensing mechanism was determined to be reversible and purely collisional with some fluorophores less accessible than the others. This work demonstrated the ability to produce Cdots from microalgae biochar, examined their application as a transducer for detecting heavy metal ions in aqueous systems and paves the way for novel sensing systems using MAB-Cdots.

Tuning Pb(II) Adsorption from Aqueous Solutions on Ultrathin Iron Oxychloride (FeOCl) Nanosheets

Structural tunability and surface functionality of layered two-dimensional (2-D) iron oxychloride (FeOCl) nanosheets are critical for attaining exceptional adsorption properties. In this study, we combine computational and experimental tools to elucidate the distinct adsorption nature of Pb(II) on 2-D FeOCl nanosheets. After finding promising Pb(II) adsorption characteristics by bulk FeOCl sheets (B-FeOCl), we applied computational quantum mechanical modeling to mechanistically explore Pb(II) adsorption on representative FeOCl facets. Results indicate that increasing the exposure of FeOCl oxygen and chlorine sites significantly enhances Pb(II) adsorption. The (110) and (010) facets of FeOCl possess distinct orientations of oxygen and chlorine, resulting in different Pb(II) adsorption energies. Consequently, the (110) facet was found to be more selective toward Pb(II) adsorption than the (010) facet. To exploit this insight, we exfoliated B-FeOCl to obtain ultrathin FeOCl nanosheets (U-FeOCl) possessing unique chlorine- and oxygen-enriched surfaces. As we surmised, U-FeOCl nanosheets achieved excellent Pb(II) adsorption capacity (709 mg g^-1 or 3.24 mmol g^-1). Moreover, U-FeOCl demonstrated rapid adsorption kinetics, shortening adsorption equilibration time to one-third of the time for B-FeOCl. Extensive characterization of FeOCl-Pb adsorption complexes corroborated the simulation results, illustrating that increasing the number of Pb-O and Pb-Cl interaction sites led to the improved Pb(II) adsorption capacity of U-FeOCl.

Fabrication of terminal amino hyperbranched polymer modified graphene oxide and its prominent adsorption performance towards Cr(VI)

In order to increase the density and quantity of functional groups on adsorbent, three terminal amino hyperbranched polymer modified graphene oxide adsorbents including GO-HBP-NH₂-DETA, GO-HBP-NH₂-TETA and GO-HBP-NH₂-TEPA with N-containing functional group density of 7.21 wt%, 10.20 wt% and 12.43 wt%, respectively, were prepared and used for the adsorption and reduction of toxic hexavalent chromium Cr(VI) to less toxic Cr(III). The morphology and structure of obtained adsorbents were characterized by FT-IR, SEM, XRD, Raman, BET, XPS and zeta potential. The density of receptor sites (N_m) of the three adsorbents calculated from statistical physics model with one energy site were found to be 456.62, 604.54 and 636.03, respectively. Adsorption experiments demonstrated that the high adsorption capacities of the three adsorbents obtained from Langmuir isotherm model towards Cr(VI) were 245.01, 257.26 and 300.88 mg/g, respectively, suggesting that GO-HBP-NH₂-TEPA had better adsorption ability. The density functional theory calculation (DFT) indicated that GO-HBP-NH₂-TEPA was more likely to adsorb HCrO₄^- rather than Cr₂O₇^2- at lower pH conditions. A possible adsorption mechanism was also proposed where electrostatic interaction between Cr(VI) (HCrO₄^- or Cr₂O₇^2-) and the N functional group (+) on GO-HBP-NH₂-TEPA dominated the adsorption of Cr(VI) and reduction mechanism dominated the reduction of Cr(VI)-Cr(III).

Combining mussel and seaweed hydrogel-inspired strategies to design novel ion-imprinted sorbents for ultra-efficient lead removal from water

Lead(ii) is one of the most toxic heavy metals and is a serious threat to the environment and human health.

Controlled release of agrochemicals and heavy metal ion capture dual-functional redox-responsive hydrogel for soil remediation

A novel redox-responsive hydrogel for controlled release of agrochemicals and heavy metal ion capture was prepared, benefiting plant growth and soil remediation synchronously.