Block copolymer micelles for delivery of gene and related compounds

Optimized rod length of polyplex micelles for maximizing transfection efficiency and their performance in systemic gene therapy against stroma-rich pancreatic tumors

Poly(ethylene glycol) (PEG) modification onto a gene delivery carrier for systemic application results in a trade-off between prolonged blood circulation and promoted transfection because high PEG shielding is advantageous in prolonging blood retention, while it is disadvantageous with regard to obtaining efficient transfection owing to hampered cellular uptake. To tackle this challenging issue, the present investigation focused on the structure of polyplex micelles (PMs) obtained from PEG-poly(l-lysine) (PEG-PLys) block copolymers characterized as rod-shaped structures to seek the most appreciable formulation. Comprehensive investigations conducted with particular focus on stability, PEG crowdedness, and rod length, controlled by varying PLys segment length, clarified the effect of these structural features, with particular emphasis on rod length as a critical parameter in promoting cellular uptake. PMs with rod length regulated below the critical threshold length of 200 nm fully exploited the benefits of cross-linking and the cyclic RGD ligand, consequently, exhibiting remarkable transfection efficiency comparable with that of ExGen 500 and Lipofectamine(®) LTX with PLUS™ even though PMs were PEG shielded. The identified PMs exhibited significant antitumor efficacy in systemic treatment of pancreatic adenocarcinoma, whereas PMs with rod length above 200 nm exhibited negligible antitumor efficacy despite a superior blood circulation property, thereby highlighting the significance of controlling the rod length of PMs to promote gene transduction.

pH-Sensitive cationic copolymers of different macromolecular architecture as potential dexamethasone sodium phosphate delivery systems

This paper describes the synthesis and characterization of cationic copolymers with different macromolecular architecture and drug delivery properties of the corresponding dexamethasone sodium phosphate (DSP)-loaded systems. Copolyelectrolytes comprising poly[2-(acryloyloxy)ethyl] trimethylammonium chloride (PAETMAC) and poly(ethylene glycol) blocks as well as a tri-arm star-shaped PAETMAC were synthesized using cerium(IV) ion-mediated polymerization method. The obtained copolyelectrolytes and corresponding ionic associates with DSP have been characterized by (1)H NMR, Fourier Transform Infrared spectroscopy, and differential scanning calorimetry. The average diameter, size distribution, and ζ-potential of the copolymers and DSP-copolymer ionic associates were determined by dynamic light scattering, and particles were visualized by scanning electron microscopy and transmission electron microscopy. The biocompatibility and cytotoxicity of obtained copolymers were determined. In vitro drug release experiments were carried out to estimate the ability of the obtained nanoparticles for sustained release of DSP for a period of 24 h.

Actively-targeted polyion complex micelles stabilized by cholesterol and disulfide cross-linking for systemic delivery of siRNA to solid tumors

For small interfering RNA (siRNA)-based cancer therapies, we report an actively-targeted and stabilized polyion complex micelle designed to improve tumor accumulation and cancer cell uptake of siRNA following systemic administration. Improvement in micelle stability was achieved using two stabilization mechanisms; covalent disulfide cross-linking and non-covalent hydrophobic interactions. The polymer component was designed to provide disulfide cross-linking and cancer cell-targeting cyclic RGD peptide ligands, while cholesterol-modified siRNA (Chol-siRNA) provided additional hydrophobic stabilization to the micelle structure. Dynamic light scattering confirmed formation of nano-sized disulfide cross-linked micelles (<50 nm in diameter) with a narrow size distribution. Improved stability of Chol-siRNA-loaded micelles (Chol-siRNA micelles) was demonstrated by resistance to both the dilution in serum-containing medium and counter polyion exchange with dextran sulfate, compared to control micelles prepared with Chol-free siRNA (Chol-free micelles). Improved stability resulted in prolonged blood circulation time of Chol-siRNA micelles compared to Chol-free micelles. Furthermore, introduction of cRGD ligands onto Chol-siRNA micelles significantly facilitated accumulation of siRNA in a subcutaneous cervical cancer model following systemic administration. Ultimately, systemically administered cRGD/Chol-siRNA micelles exhibited significant gene silencing activity in the tumor, presumably due to their active targeting ability combined with the enhanced stability through both hydrophobic interactions of cholesterol and disulfide cross-linking.

Sequential optimization of methotrexate encapsulation in micellar nano-networks of polyethyleneimine ionomer containing redox-sensitive cross-links

A functional polycation nanonetwork was developed for delivery of water soluble chemotherapeutic agents. The complexes of polyethyleneimine grafted methoxy polyethylene glycol (PEI-g-mPEG) and Zn(2+) were utilized as the micellar template for cross-linking with dithiodipropionic acid, followed by an acidic pH dialysis to remove the metal ion from the micellar template. The synthesis method was optimized according to pH, the molar ratio of Zn(2+), and the cross-link ratio. The atomic force microscopy showed soft, discrete, and uniform nano-networks. They were sensitive to the simulated reductive environment as determined by Ellman's assay. They showed few positive ζ potential and an average hydrodynamic diameter of 162±10 nm, which decreased to 49±11 nm upon dehydration. The ionic character of the nano-networks allowed the achievement of a higher-loading capacity of methotrexate (MTX), approximately 57% weight per weight, depending on the cross-link and the drug feed ratios. The nano-networks actively loaded with MTX presented some suitable properties, such as the hydrodynamic size of 117±16 nm, polydispersity index of 0.22, and a prolonged swelling-controlled release profile over 24 hours that boosted following reductive activation of the nanonetwork biodegradation. Unlike the PEI ionomer, the nano-networks provided an acceptable cytotoxicity profile. The drug-loaded nano-networks exhibited more specific cytotoxicity against human hepatocellular carcinoma cells if compared to free MTX at concentrations above 1 μM. The enhanced antitumor activity in vitro might be attributed to endocytic entry of MTX-loaded nano-networks that was found in the epifluorescence microscopy experiment for the fluorophore-labeled nano-networks.

Drug delivery design for intravenous route with integrated physicochemistry, pharmacokinetics and pharmacodynamics: illustration with the case of taxane therapeutics

This review is aimed at combining the published data on taxane formulations into a generalized Drug Delivery approach, starting from the physicochemistry and assessing its relationships with the pharmacokinetics, the biodistribution and the pharmacodynamics. Owing to the number and variety of taxane formulation designs, we considered this class of cytotoxic anticancer agents of particular interest to illustrate the concepts attached to this approach. According to the history of taxane development, we propose a classification as (i) "surfactant-based formulations" first generation, (ii) "surfactant-free formulations" second generation and (iii) "modulated pharmacokinetics drug delivery systems" third generation. Since our objective was to make the link between (i) the physicochemistry of the drug and carrier and (ii) the efficacy and safety of the drug in preclinical animal models and (iii) in human, we focused on the drug delivery technologies that were tested in clinic.

PEG-peptide conjugates

The remarkable diversity of the self-assembly behavior of PEG-peptides is reviewed, including self-assemblies formed by PEG-peptides with β-sheet and α-helical (coiled-coil) peptide sequences. The modes of self-assembly in solution and in the solid state are discussed. Additionally, applications in bionanotechnology and synthetic materials science are summarized.

Self-organized Mn2+-Block Copolymer Complexes and Their Use for In Vivo MR Imaging of Biological Processes

Manganese-block copolymer complexes (MnBCs) that contain paramagnetic Mn ions complexed with ionic-nonionic poly(ethylene oxide-b-poly(methacrylate) have been developed for use as a T1-weighted MRI contrast agent. By encasing Mn ion within ionized polymer matrices, r1 values could be increased by 250-350 % in comparison with free Mn ion at relative high fields of 4.7 to 11.7 T. MnBCs were further manipulated by treatment with NaOH to achieve more stable complexes (iMnBCs). iMnBCs delayed release of Mn2+ which could be accelerated by low pH, indeed by cellular uptake via endocytosis into acidic compartments. Both complexes exhibited good T1 contrast signal enhancement in liver following intravenous infusion. The contrast was observed in gallbladder due to the clearance of Mn ion from liver to biliary process. iMnBCs, notably, showed a delayed contrast enhancement profile in gallbladder, which was interpreted to be due to degradation and excretion of Mn2+ ions into the gallbladder. Intracortical injection of iMnBCs into the rat brain also led to delayed neuronal transport to thalamus. The delayed enhancement feature may have benefits for targeting MRI contrast to specific cells and surface receptors that are known to be internalized by endocytosis.

Tunable nano-carriers from clicked glycosaminoglycan block copolymers

Synthesis of diblock copolymers of PEG and glycosaminoglycans by oxime click reaction is reported and the ability of these copolymers to carry positively charged proteins is evidenced.

Nano polymeric carrier fabrication technologies for advanced antitumor therapy

Comparing with the traditional therapeutic methods, newly developed cancer therapy based on the nanoparticulates attracted extensively interest due to its unique advantages. However, there are still some drawbacks such as the unfavorable in vivo performance for nanomedicine and undesirable tumor escape from the immunotherapy. While as we know that the in vivo performance strongly depended on the nanocarrier structural properties, thus, the big gap between in vitro and in vivo can be overcome by nanocarrier's structural tailoring by fine chemical design and microstructural tuning. In addition, this fine nanocarrier's engineering can also provide practical solution to solve the problems in traditional cancer immunotherapy. In this paper, we review the latest development in nanomedicine, cancer therapy, and nanoimmunotherapy. We then give an explanation why fine nanocanrrie's engineering with special focus on the unique pathology of tumor microenvironments and properties of immunocells can obviously promote the in vivo performance and improve the therapeutic index of nanoimmunotherapy.

Nanoparticle systems as tools to improve drug delivery and therapeutic efficacy

Nanoparticle-based drug delivery systems are appealing because, among other properties, they are easily manufactured and have the capacity to encapsulate a wide variety of drugs, many of which are not directly miscible with water. This review classifies nanoparticles into three broad categories based upon material composition: bio-inspired systems, synthetic systems, and inorganic systems. Each has distinct properties suitable for drug delivery applications, including their structure, composition, and pharmacokinetics (including clearance and uptake mechanisms), making each uniquely suitable for certain types of drugs. Furthermore, nanoparticles can be customized, making them ideal for a variety of applications. Advantages and disadvantages of the different systems are discussed. Strategies for improving nanoparticle efficacy include adding targeting agents on the nanoparticle surface, altering the degradation profile to control drug release, or PEGylating the surface to increase circulation times and reduce immediate clearance by the kidneys. The future of nanoparticle systems seems to be focused on further improving overall patient outcome by increasing delivery accuracy to the target area.

Two-photon ratiometric fluorescent mapping of intracellular transport pathways of pH-responsive block copolymer micellar nanocarriers

Ultrasensitive ratiometric fluorescent pH probes based on dual dye-labeled pH-responsive diblock copolymer micellar scaffold are constructed. The pH-sensitive emitting nature of BTPE dyes and emission turn-on of CMA moieties triggered by pH-actuated micelle-to-unimer of diblock scaffold synergistically contribute to the observed ≈250-fold changes of BTPE/CMA emission intensity ratios in the whole pH range. Two-photon ratiometric fluorescent pH mapping of intracellular gradients subjected by pH-responsive micellar nanoparticles in their endocytic pathway has been thus achieved.

Can nanomedicines kill cancer stem cells?

Most tumors are heterogeneous and many cancers contain small population of highly tumorigenic and intrinsically drug resistant cancer stem cells (CSCs). Like normal stem cell, CSCs have the ability to self-renew and differentiate to other tumor cell types. They are believed to be a source for drug resistance, tumor recurrence and metastasis. CSCs often overexpress drug efflux transporters, spend most of their time in non-dividing G0 cell cycle state, and therefore, can escape the conventional chemotherapies. Thus, targeting CSCs is essential for developing novel therapies to prevent cancer relapse and emerging of drug resistance. Nanocarrier-based therapeutic agents (nanomedicines) have been used to achieve longer circulation times, better stability and bioavailability over current therapeutics. Recently, some groups have successfully applied nanomedicines to target CSCs to eliminate the tumor and prevent its recurrence. These approaches include 1) delivery of therapeutic agents (small molecules, siRNA, antibodies) that affect embryonic signaling pathways implicated in self-renewal and differentiation in CSCs, 2) inhibiting drug efflux transporters in an attempt to sensitize CSCs to therapy, 3) targeting metabolism in CSCs through nanoformulated chemicals and field-responsive magnetic nanoparticles and carbon nanotubes, and 4) disruption of multiple pathways in drug resistant cells using combination of chemotherapeutic drugs with amphiphilic Pluronic block copolymers. Despite clear progress of these studies the challenges of targeting CSCs by nanomedicines still exist and leave plenty of room for improvement and development. This review summarizes biological processes that are related to CSCs, overviews the current state of anti-CSCs therapies, and discusses state-of-the-art nanomedicine approaches developed to kill CSCs.

Novel controlled drug delivery system for multiple drugs based on electrospun nanofibers containing nanomicelles

This research described a novel composite electrospun nanofibers, which were consisted of MPEG-b-PLA micelles, chitosan, and PEO, realizing controlled release of both hydrophobic and hydrophilic drugs. 5-FU and Cefradine used as model drugs were successfully loaded in the nanofibers. The in vitro studies showed there was a low initial burst release of 5-FU from micelles-loaded nanofibers, and the final release proportion was about 91.4% after continually releasing for 109 h. In vitro cytotoxicity studies revealed that 5-FU-loaded nanofibers restrained HepG-2 cells efficiently, and the cell viability was 45.9% after three days of cultivation in solutions containing micelles-loaded nanofibers with 21.6 μg 5-FU. All results suggested that micelles-loaded nanofibers with two kinds of drugs can be used as an effective controlled drug delivery vehicle and may have a bright future in cancer chemotherapy or clinical treatments.

Stopped-flow kinetic studies of poly(amidoamine) dendrimer-calf thymus DNA to form dendriplexes

Poly(amidoamine) (PAMAM) dendrimers are known to be highly efficient nonviral carriers in gene delivery. Dendrimer-mediated transfection is known to be a function of the dendrimer to DNA charge ratio as well as the size of the dendrimer. In the present study, the binding kinetics of four PAMAM dendrimers (G1, G2, G3, and G4) with calf thymus DNA (CT-DNA) has been studied using stopped-flow fluorescence spectroscopy. The effect of dendrimer-to-DNA charge ratio and dendrimer generation on the binding kinetics was investigated. In most cases, the results of dendrimer-CT-DNA binding can be explained by a two-step reaction mechanism: a rapid electrostatic binding between the dendrimer and DNA, followed by a conformational change of the dendrimer-DNA complex that ultimately leads to DNA condensation. It was observed that the charge ratio on the dendrimer and the DNA phosphate groups, as well as the dendrimer generation (size), has a marked effect on the kinetics of binding between the DNA and the dendrimers. The rate constant (k'1) of the first step was much higher compared to that of the second step (k'2), and both were found to increase with an increase in dendrimer concentration. Among the four generations of dendrimers, G4 exhibited significantly faster binding kinetics compared to the three smaller generation dendrimers.

Progressive macromolecular self-assembly: from biomimetic chemistry to bio-inspired materials

Macromolecular self-assembly (MSA) has been an active and fruitful research field since the 1980s, especially in this new century, which is promoted by the remarkable developments in controlled radical polymerization in polymer chemistry, etc. and driven by the demands in bio-related investigations and applications. In this review, we try to summarize the trends and recent progress in MSA in relation to biomimetic chemistry and bio-inspired materials. Our paper covers representative achievements in the fabrication of artificial building blocks for life, cell-inspired biomimetic materials, and macromolecular assemblies mimicking the functions of natural materials and their applications. It is true that the current status of the deliberately designed and obtained nano-objects based on MSA including a variety of micelles, multicompartment vesicles, and some hybrid and complex nano-objects is at their very first stage to mimic nature, but significant and encouraging progress has been made in achieving a certain similarity in morphologies or properties to that of natural ones. Such achievements also demonstrate that MSA has played an important and irreplaceable role in the grand and long-standing research of biomimetic and bio-inspired materials, the future success of which depends on mutual and persistent efforts in polymer science, material science, supramolecular chemistry, and biology.

Functional magnetic nanoparticles for non-viral gene delivery and MR imaging

Gene therapy is becoming a promising strategy to treat various kinds of genetic and acquired diseases. However, the development of safe, efficient, and targetable gene delivery systems remains a major challenge in gene therapy. The unique material characteristics of magnetic nanoparticles (MNPs), including high surface area, facile surface modification, controllable size, and excellent magnetic properties, make them promising candidates for gene delivery. The engineered MNPs with modifiable functional surfaces and bioactive cores can result in several advantageous diagnostic and therapeutic properties including enhanced magnetic resonance imaging (MRI) signal intensity, long permeation and retention in the circulatory system, specific delivery of therapeutic genes to target sites. In this review, the updated research on the preparation and surface modification of MNPs for gene delivery is summarized.

Controlled block copolymer micelle formation for encapsulation of hydrophobic ingredients

We report on the formation of polymeric micelles in water using triblock copolymers with a polyethylene glycol middle block and various hydrophobic outer blocks prepared with the precipitation method. We form micelles in a reproducible manner with a narrow size distribution. This suggests that during the formation of the micelles the system had time to form micelles under close-to-thermodynamic control. This may explain why it is possible to use an equilibrium self-consistent field theory to predict the hydrodynamic size and the loading capacity of the micelles in accordance with experimental finding. Yet, the micelles are structurally quenched as concluded from the observation of size stability in time. We demonstrate that our approach enables to prepare rather hydrophobic block copolymer micelles with tunable size and loading.

Delivery of siRNA to the brain using a combination of nose-to-brain delivery and cell-penetrating peptide-modified nano-micelles

The potential for RNA-based agents to serve as effective therapeutics for central nerve systems (CNS) disorders has been successfully demonstrated in vitro. However, the blood-brain barrier limits the distribution of systemically administered therapeutics to the CNS, posing a major challenge for drug development aimed at combatting CNS disorders. Therefore, the development of effective strategies to enhance siRNA delivery to the brain is of great interest in clinical and pharmaceutical fields. To improve the efficiency of small interfering RNA (siRNA) delivery to the brain, we developed a nose-to-brain delivery system combined with cell-penetrating peptide (CPP) modified nano-micelles comprising polyethylene glycol-polycaprolactone (PEG-PCL) copolymers conjugated with the CPP, Tat (MPEG-PCL-Tat). In this study, we describe intranasal brain delivery of siRNA or dextran (Mw: 10,000 Da) as a model siRNA, by using MPEG-PCL-Tat. Intranasal delivery of dextran with MPEG-PCL-Tat improved brain delivery compared to intravenous delivery of dextran either with or without MPEG-PCL-Tat. We also studied the intranasal transfer of MPEG-PCL-Tat to the brain via the olfactory and trigeminal nerves, the putative pathways to the brain from the nasal cavity. We found that MPEG-PCL-Tat accelerated transport along the olfactory and trigeminal nerve pathway because of its high permeation across the nasal mucosa.

Size and shape characterization of thermoreversible micelles of three-armed star elastin-like polypeptides

Three-armed star elastin-like polypeptides are shown to have the capability of self-assembling into micellar constructs at certain environmental conditions. Here, a study of the size distribution, shape, and molecular weight of these micelles at different salt concentrations and pH values is presented. Multiangle dynamic light scattering was used to study the formation, reversibility, and size of the micelles at different environmental conditions. On the basis of the salt concentration of the solution, two distinct size distribution regimes and a transition region were observed. Static light scattering was performed to study the molecular weight and geometrical anisotropy of the micelles in each regime. The anisotropic behavior and elongation of the particles were independently confirmed by depolarized dynamic light scattering, and a model for micelles at each regime was proposed. The size and molecular weight of the micelles were verified using viscosity measurements. The results of this study suggest that there is big jump in the size and molecular weight of the micelles from the first salt-dependent regime to the other, and the shape of the micelles changes from spheres to cylindrical micelles with a higher than 10:1 axis ratio.

Polymeric micelles, a promising drug delivery system to enhance bioavailability of poorly water-soluble drugs

Oral administration is the most commonly used and readily accepted form of drug delivery; however, it is find that many drugs are difficult to attain enough bioavailability when administered via this route. Polymeric micelles (PMs) can overcome some limitations of the oral delivery acting as carriers able to enhance drug absorption, by providing (1) protection of the loaded drug from the harsh environment of the GI tract, (2) release of the drug in a controlled manner at target sites, (3) prolongation of the residence time in the gut by mucoadhesion, and (4) inhibition of efflux pumps to improve the drug accumulation. To explain the mechanisms for enhancement of oral bioavailability, we discussed the special stability of PMs, the controlled release properties of pH-sensitive PMs, the prolongation of residence time with mucoadhesive PMs, and the P-gp inhibitors commonly used in PMs, respectively. The primary purpose of this paper is to illustrate the potential of PMs for delivery of poorly water-soluble drugs with bioavailability being well maintained.

Oral drug delivery systems using chemical conjugates or physical complexes

Oral delivery of therapeutics is extremely challenging. The digestive system is designed in a way that naturally allows the degradation of proteins or peptides into small molecules prior to absorption. For systemic absorption, the intact drug molecules must traverse the impending harsh gastrointestinal environment. Technologies, such as enteric coating, with oral dosage formulation strategies have successfully provided the protection of non-peptide based therapeutics against the harsh, acidic condition of the stomach. However, these technologies showed limited success on the protection of therapeutic proteins and peptides. Importantly, inherent permeability coefficient of the therapeutics is still a major problem that has remained unresolved for decades. Addressing this issue in the context, we summarize the strategies that are developed in enhancing the intestinal permeability of a drug molecule either by modifying the intestinal epithelium or by modifying the drug itself. These modifications have been pursued by using a group of molecules that can be conjugated to the drug molecule to alter the cell permeability of the drug or mixed with the drug molecule to alter the epithelial barrier function, in order to achieve the effective drug permeation. This article will address the current trends and future perspectives of the oral delivery strategies.

Polymeric Surfactants: Novel Agents with Exceptional Properties

This article presents recent progress in the field of polymeric surfactants made of permanently amphiphilic block copolymers or of stimulus-sensitive ones. We highlight key points in the design of amphiphilic macromolecules, to yield polymer surfactants with tailor-made properties, as well as recently developed and still challenging application fields for this new class of surfactants. The efficiency boosting of amphiphilic block copolymers as co-surfactants in microemulsions is discussed, as are surface modification by polymer surfactants, and stabilization of dispersions. Moreover, the use of block copolymers in nanosciences is presented, for instance as a tool for nanomaterial fabrication, or for biomedical and cosmetic applications in bio-nanotechnology. Finally, self-assembly and applications of some newly developed “exotic” amphiphilic block copolymer structures as new surface-active materials will be highlighted.

Encapsulation of hydrophobic drugs in Pluronic F127 micelles: effects of drug hydrophobicity, solution temperature, and pH

Three drugs, ibuprofen, aspirin, and erythromycin, are encapsulated in spherical Pluronic F127 micelles. The shapes and the size distributions of the micelles in dilute, aqueous solutions, with and without drugs, are ascertained using cryo-scanning electron microscopy and dynamic light scattering (DLS) experiments, respectively. Uptake of drugs above a threshold concentration is seen to reduce the critical micellization temperature of the solution. The mean hydrodynamic radii and polydispersities of the micelles are found to increase with decrease in temperature and in the presence of drug molecules. The hydration of the micellar core at lower temperatures is verified using fluorescence measurements. Increasing solution pH leads to the ionization of the drugs incorporated in the micellar cores. This causes rupture of the micelles and release of the drugs into the solution at the highest solution pH value of 11.36 investigated here and is studied using DLS and fluorescence spectrocopy.

Fabrication of poly(lactide-co-glycolide) scaffold filled with fibrin gel, mesenchymal stem cells, and poly(ethylene oxide)-b-poly(L-lysine)/TGF-β1 plasmid DNA complexes for cartilage restoration in vivo

A poly (lactide-co-glycolide) (PLGA) scaffold filled with fibrin gel, mesenchymal stem cells (MSCs) and poly(ethylene oxide)-b-poly (L-lysine) (PEO-b-PLL)/pDNA-TGF-β1 complexes was fabricated and applied in vivo for synchronized regeneration of cartilage and subchondral bone. The PEO-b-PLL/pDNA-TGF-β1 complexes could transfect MSCs in vitro to produce TGF-β1 in situ and up regulate the expression of chondrogenesis-related genes in the construct. The expression of heterogeneous TGF-β1 in vivo declined along with the prolongation of implantation time, and lasted for 3 and 6 weeks in the mRNA and protein levels, respectively. The constructs (Experimental group) of PLGA/fibrin gel/MSCs/(PEO-b-PLL/pDNA-TGF-β1 complexes) were implanted into the osteochondral defects of rabbits to restore the functional cartilages, with gene-absent constructs as the Control. After 12 weeks, the Experimental group regenerated the neo-cartilage and subchondral bone with abundant deposition of glycosaminoglycans (GAGs) and type II collagen. The regenerated tissues had good integration with the host tissues too. By contrast, the defects were only partially repaired by the Control constructs. qRT-PCR results demonstrated that expression of the chondrogenesis-marker genes in the Experimental group was significantly higher than that of the Control group, and was very close to that of the normal cartilage tissue.

Tailoring polymeric micelles to optimize delivery to solid tumors

Block copolymer micelles have shown great potential in drug delivery systems, not only for overcoming the drawbacks of small agents such as water insolubility and wide distribution in normal tissues, but also for avoiding traditional nanoparticle formulation shortcomings, including in vivo instability and fast clearance from the blood. However, for translating micellar formulations to clinical practice, it is essential to overcome the many in vivo obstacles. Surmounting these barriers strongly depends on micellar physicochemical properties, which can be further optimized by the unique physiological aspects of solid tumors such as low pH, high temperature and the presence of abnormal vessels. Herein, based on the Flory parameter and scaling theory, the fundamental mechanisms and correlations in vitro/in vivo between self assembly, drug loading and release, stability, intracellular delivery and in vivo distribution, as well as micellar composition, size and microstructural tailoring are systematically revisited. The methods for enhancing micellar performance in solid tumors were consequently proposed through well-defined core-corona structure tailoring.

Evaluation of anti-inflammatory drug-conjugated silicon quantum dots: their cytotoxicity and biological effect

Silicon quantum dots (Si-QDs) have great potential for biomedical applications, including their use as biological fluorescent markers and carriers for drug delivery systems. Biologically inert Si-QDs are less toxic than conventional cadmium-based QDs, and can modify the surface of the Si-QD with covalent bond. We synthesized water-soluble alminoprofen-conjugated Si-QDs (Ap-Si). Alminoprofen is a non-steroid anti-inflammatory drug (NSAID) used as an analgesic for rheumatism. Our results showed that the "silicon drug" is less toxic than the control Si-QD and the original drug. These phenomena indicate that the condensed surface integration of ligand/receptor-type drugs might reduce the adverse interaction between the cells and drug molecules. In addition, the medicinal effect of the Si-QDs (i.e., the inhibition of COX-2 enzyme) was maintained compared to that of the original drug. The same drug effect is related to the integration ratio of original drugs, which might control the binding interaction between COX-2 and the silicon drug. We conclude that drug conjugation with biocompatible Si-QDs is a potential method for functional pharmaceutical drug development.