Sulfur-doped graphene quantum dots as a novel fluorescent probe for highly selective and sensitive detection of Fe(3+)

Carbon Dot-functionalized Interferometric Optical Fiber Sensor for Detection of Ferric Ions in Biological Samples

This work reports an interferometric optical microfiber sensor functionalized with nitrogen- and sulfur-codoped carbon dots (CDs) for the detection of ferric ions (Fe³⁺). Compared to other CD-based ferric ion sensors, the sensing mechanism of this presented sensor is dependent on the refractive index modulations due to selective Fe³⁺ adsorption onto the CD binding sites at the tapered region. This is the first study in which CD-based sensing was performed at the solid phase as a chelator, which does not rely on its fluorescence properties. The detection performance of the proposed sensor is not only comparable to a conventional fluorescence-based CD nanoprobe sensor but also capable of delivering quantitative analysis results and ease of translation to a sensor device for on-site detection. The presented sensor exhibits Fe³⁺ detection sensitivity of 0.0061 nm/(μg/L) in the linear detection range between 0 and 300 μg/L and a detection limit of 0.77 μg/L based on the Langmuir isotherm model. Finally, the potential use of the CD-functionalized optical microfiber sensor in the real environmental and biological Fe³⁺ monitoring applications has also been validated in this work.

Rhodamine probes for Fe3+: theoretical calculation for specific recognition and instant fluorescent bioimaging

Aim: To overcome the existing difficulty in distinguishing Fe(III) from Fe(II), rhodamine-containing Fe3+ probes, giving off different fluorescence responses to ferric and ferrous ions, were synthesized. Materials & methods: Color change in Fe3+ recognition, accompanying spirolactam opening–closing, could be used for ‘naked-eye’ detection. Theoretical calculations revealed the possible Fe3+-probe combination mechanism. Results: Apart from the probes’ specific response toward Fe3+, the Fe3+-probe demonstrated highly quantitative relationships in fluorescence titration, instant labeling and dynamic tracking of intracellular Fe3+ in bioimaging. Conclusion: Cytotoxity and bioimaging in living L929 suggested the probes’ future applications as real-time detection methods for Fe3+ in clinical diagnosis. Instant and time-lapse imagings, based on fluorescence-time stability of Fe3+-probe, enables the dynamic labeling and tracking of Fe3+ in living systems.

Dual-binding pyridine and rhodamine B conjugate derivatives as fluorescent chemosensors for ferric ions in aqueous media and living cells

Two new pyridine-type rhodamine B chemosensors (RBPO and RBPF) used to detect Fe3+ have been designed and synthesized, and the sensing behavior towards various metal ions was evaluated via UV-vis and fluorescence spectroscopic techniques. Both RBPO and RBPF not only have good spectral responses to Fe3+ in an EtOH/H2O solution (3 : 1, v/v, HEPES, 0.5 mM, pH = 7.33) with low detection limits and high binding constants, but also suffer from less interference from common metal cations. The two chemosensors are further proven to be practical in sensitively monitoring trace Fe3+ in real water specimens. Intracellular imaging applications demonstrated that RBPO and RBPF can be used as two fluorescent chemosensors for the detection of Fe3+ in living human breast adenocarcinoma (MCF-7) cells.

Reed-derived fluorescent carbon dots as highly selective probes for detecting Fe3+ and excellent cell-imaging agents

A kind of highly selective and sensitive fluorescent probe for detecting Fe3+, carbon dots (CDs), was prepared with renewable reed naturally containing C, N, O, and S elements as a green and eco-friendly carbon source by a simple hydrothermal process. The fluorescence of CDs without purification and surface modification can be quenched by Fe3+ in a wide concentration range of 0 to 362 μmol L-1 (concentration of Fe3+), with detection limits as low as 0.014 μmol L-1 in 0-50 μmol L-1. Characterizations, such as TEM, XPS, Raman and FTIR, confirmed that the static quenching mechanism involved the generation of non-luminescent complexes between Fe3+ and functional groups (carboxyl group, sulfur-oxyl group and hydroxyl group) on the surface of CDs and with the aggregation of CDs. More importantly, CDs had good biocompatibility and nontoxicity according to an MTT cell-viability assay, and cells labeled with CDs emitted blue, green and red color fluorescence. Thus, the static quenching mechanism was confirmed. So, this reed-derived natural CD solution can be utilized in detecting Fe3+, culture cells, and cell imaging.

Aqueous Phase Sensing of Fe3+ and Ascorbic Acid by a Metal-Organic Framework and Its Implication in the Construction of Multiple Logic Gates

A new Hf^IV -based metal-organic framework with UiO-66 topology was synthesized via a one-step solvothermal method by using 3-methyl-4-phenylthieno[2,3-b]thiophene-2,5-dicarboxylic acid (H₂ MPTDC) as a ligand. The MOF material showed a high stability in a broad pH range (from pH 2 to pH 12) in an aqueous medium. The presence of hydrophobic methyl and phenyl substituents in the carboxylic acid ligand and strong Hf-O bond play crucial roles in its stability. The new MOF material was systematically characterized by various techniques such as XRPD, N₂ sorption, thermogravimetric analyses and FT-IR spectroscopy. The photophysical properties of the MOF material were also examined by steady-state and time-resolved fluorescence studies. It was observed that the blue fluorescence of the MOF material was selectively quenched in the presence of Fe³⁺ ion in pure aqueous medium. A mechanistic study disclosed that quenching occurs via a strong inner filter effect (IFE) arising from Fe³⁺ ion in aqueous medium. Interestingly, the fluorescence of the MOF material can be recovered by elimination of the IFE of Fe³⁺ ion via reduction of Fe³⁺ ion by ascorbic acid (AA). Based on the fluorescence recovery by AA, a MOF based on-off-on probe was developed for the sensing of Fe³⁺ ion and AA in aqueous medium. Inspired by this reversible sensing event, we demonstrate basic (NOT, OR, YES, INHIBIT and IMP) and higher integrated logic operations utilizing this fluorescent MOF. This MOF-based logic systems could be potentially used for next-generation logic-gate based analytical applications as well as for the detection and discrimination of targeted molecules in various complex domains.

High efficient adsorption and storage of iodine on S, N co-doped graphene aerogel

High efficient adsorption of radioiodine in nuclear waste has attracted extensive attentions all over the world. In this work, we fabricated sulfur and nitrogen co-doped graphene aerogels (SN-GA) through one-step hydrothermal method, and investigated its iodine adsorption behavior including adsorption kinetics and isotherms in water. Our results reveal that SN-GA exhibits a 3D porous architecture with thiophene-S, oxidized-S, pyridine-N, pyrrole-N and graphite-N co-doped into the sp² carbon frameworks. The adsorption experiment showed SN-GA has a maximum iodine adsorption capacity of 999 mg g^-1 determined by Langmuir isotherm, and the adsorption process could be better described by the pseudo-second-order model.

Cu-Doped Carbon Dots as Catalysts for the Chemiluminescence Detection of Glucose

Development of metal-doped carbon dots (CDs) to effectively modulate their electronic properties and surface chemical reactivities is still in its early stage. In this paper, a facile solid-phase synthesis strategy was developed to synthesize Cu-doped CDs (Cu-CDs) using citric acid as the carbon source and Cu(NO₃)₂·3H₂O as the dopant, respectively. The as-prepared Cu-CDs exhibited superior peroxidase-like activity to horseradish peroxidase and were stable under a wide range of pH and temperatures. Consequently, the Cu-CD-based chemiluminescence sensing was applied to sensitively detect glucose with a low detection limit of 0.32 μM, and the recoveries and the relative standard deviation of the serum sample are 87.2-112.2 and 8.16% (n = 6), respectively. Notably, the proposed chemiluminescence sensing was also successfully applied for label-free detection of glucose in complex biological samples, which envisioned its potential applications in clinical diagnosis and other analytical assays.

Future Perspectives and Review on Organic Carbon Dots in Electronic Applications

Over the span of the past decade, carbon dots (CDs) synthesized from renewable organic resources (organic CDs) have gathered a considerable amount of attention for their photoluminescent properties. This review will focus on organic CDs synthesized using clean chemistry and conventional synthetic chemistry from organic sources and their fluorescence mechanisms, such as quantum confinement effect and surface/edge defects, before outlining their performance in electronic applications, including organic photovoltaic devices, organic light-emitting devices, biosensors, supercapacitors, and batteries. The various organic resources and methods of organic CDs synthesis are briefly covered. Many challenges remain before the adoption of CDs can become widespread; their characterization, structure, functionality, and exact photoluminescent mechanism all require additional research. This review aims to summarize the current research outcomes and highlight the area where further research is needed to fully use these materials.

Chlorine-Doped Graphene Quantum Dots with Enhanced Anti- and Pro-Oxidant Properties

Production or elimination of highly reactive oxygen species is critical in antioxidant, photodynamic, therapeutic, and antibacterial applications. Recent studies have demonstrated that graphene quantum dots (GQDs) possess anti- and pro-oxidant properties simultaneously. However, their efficiency is low. Here, we report chlorine-doped GQDs (Cl-GQDs) with a tunable Cl doping amount and improved anti- and pro-oxidant activities. The scavenging performance and the free radical-produced efficiency of Cl-GQDs are about 7-fold and 3-fold, respectively, higher than those of the undoped GQDs. Meanwhile, Cl-GQDs are considered to be promising for antibacterial applications because of their enhanced singlet oxygen generating ability. We hope that this study could provide a new strategy to develop nanomaterials for application in the anti- and pro-oxidant field.

Synthesis of nitrogen-doped graphene quantum dots (N-GQDs) from marigold for detection of Fe3+ ion and bioimaging

Graphene quantum dots (GQDs) are synthesized by the method of high-temperature pyrolysis from marigold granules and subsequently nitrogen-doped graphene quantum dots (N-GQDs) are synthesized from ethylenediamine by hydrothermal treatment, which shows a strong blue emission with 7.84% quantum yield (QY). This will be used in detection of Fe³⁺ in water environments and the field of bioimaging.

Epitaxial Graphene Sensors Combined with 3D-Printed Microfluidic Chip for Heavy Metals Detection

In this work, we investigated the sensing performance of epitaxial graphene on Si-face 4H-SiC (EG/SiC) for liquid-phase detection of heavy metals (e.g., Pb and Cd), showing fast and stable response and low detection limit. The sensing platform proposed includes 3D-printed microfluidic devices, which incorporate all features required to connect and execute lab-on-chip (LOC) functions. The obtained results indicate that EG exhibits excellent sensing activity towards Pb and Cd ions. Several concentrations of Pb²⁺ solutions, ranging from 125 nM to 500 µM, were analyzed showing Langmuir correlation between signal and Pb²⁺ concentrations, good stability, and reproducibility over time. Upon the simultaneous presence of both metals, sensor response is dominated by Pb²⁺ rather than Cd²⁺ ions. To explain the sensing mechanisms and difference in adsorption behavior of Pb²⁺ and Cd²⁺ ions on EG in water-based solutions, we performed van-der-Waals (vdW)-corrected density functional theory (DFT) calculations and non-covalent interaction (NCI) analysis, extended charge decomposition analysis (ECDA), and topological analysis. We demonstrated that Pb²⁺ and Cd²⁺ ions act as electron-acceptors, enhancing hole conductivity of EG, due to charge transfer from graphene to metal ions, and Pb²⁺ ions have preferential ability to binding with graphene over cadmium. Electrochemical measurements confirmed the conductometric results, which additionally indicate that EG is more sensitive to lead than to cadmium.

The Fluorescent Quenching Mechanism of N and S Co-Doped Graphene Quantum Dots with Fe3+ and Hg2+ Ions and Their Application as a Novel Fluorescent Sensor

The fluorescence intensity of N, S co-doped graphene quantum dots (N, S-GQDs) can be quenched by Fe3+ and Hg2+. Density functional theory (DFT) simulation and experimental studies indicate that the fluorescence quenching mechanisms for Fe3+ and Hg2+ detection are mainly attributed to the inner filter effect (IFE) and dynamic quenching process, respectively. The electronegativity difference between C and doped atoms (N, S) in favor to introduce negative charge sites on the surface of N, S-GQDs leads to charge redistribution. Those negative charge sites facilitate the adsorption of cations on the N, S-GQDs' surface. Atomic population analysis results show that some charge transfer from Fe3+ and Hg2+ to N, S-GQDs, which relate to the fluorescent quenching of N, S-GQDs. In addition, negative adsorption energy indicates the adsorption of Hg2+ and Fe2+ is energetically favorable, which also contributes to the adsorption of quencher ions. Blue fluorescent N, S-GQDs were synthesized by a facile one-pot hydrothermal treatment. Fluorescent lifetime and UV-vis measurements further validate the fluorescent quenching mechanism is related to the electron transfer dynamic quenching and IFE quenching. The as-synthesized N, S-GQDs were applied as a fluorescent probe for Fe3+ and Hg2+ detection. Results indicate that N, S-GQDs have good sensitivity and selectivity on Fe3+ and Hg2+ with a detection limit as low as 2.88 and 0.27 nM, respectively.

A facile hydrothermal method for preparation of fluorescent carbon dots on application of Fe3+ and fingerprint detection

The carbon dots (CDs) was prepared by a facile hydrothermal treatment of citric acid and glycine at 180 °C. The CDs at around 3.2 nm was collected after filtration and dialysis. The sample displayed green fluorescence (G-CDs) with a quantum yield of 3.7% in high concentration and the strongest emission peak was at 545 nm under the excitation wavelength of 480 nm; the blue fluorescence CDs (B-CDs) with a quantum yield of 29.8% was obtained after diluted either in solution or in powder, the strongest emission peak was located at 475 nm under the excitation wavelength of 380 nm. The G-CDs possessed a high selectivity to Fe³⁺, which was in a linear range of 0-3.5 μM with the detection limit of 0.21 μM. The CDs powder with blue fluorescence at a relative low content was obtained and adaptable for the fingerprint detection on substrates of litmus paper, resin tabletop, glass, and orange plastic ruler.

Pillar[5]arene-based spongy supramolecular polymer gel and its properties in multi-responsiveness, dye sorption, ultrasensitive detection and separation of Fe3

Herein, a novel way to design and construct multi-functional spongy supramolecular polymer gels through an easy to make tripodal guest (TA) and a naphthalimide functionalized-pillar[5]arene host (AP5) has been developed. According to this approach, a novel pillar[5]arene-based supramolecular polymer gel (SHG) was constructed via multi-non-covalent interactions such as host-guest inclusion, C-Hπ, ππ and hydrogen bonds and so on. Interestingly, the SHG exhibits a spongy structure and strong aggregation induced emission (AIE). Furthermore, the SHG also exhibited multi-responsiveness toward outer stimuli such as heating-cooling, pH, competitive agents and mechanical. More importantly, the SHG xerogel shows separation properties for Fe3+, methyl orange, methylene blue and sudan I dyes. The separation rates of SHG xerogel for Fe3+ ions and organic dyes can reach up to 99.8%. Simultaneously, the SHG could ultrasensitively detect Fe3+ (LOD is 0.9 nM). In addition, a thin film based on SHG was also prepared, which was confirmed to be a convenient test kit for detecting Fe3+.

Green synthesis of carbon dots using the flowers of Osmanthus fragrans (Thunb.) Lour. as precursors: application in Fe3+ and ascorbic acid determination and cell imaging

In this work, dried flowers of Osmanthus fragrans Lour. were applied as green precursors to synthesize carbon dots (CDs) by a green hydrothermal method for the first time. The CDs showed strong blue fluorescence at 410 nm under 340-nm excitation with a quantum yield of approximately 18.53%. Furthermore, the CDs were applied for the sensitive detection of Fe³⁺. The linear response of Fe³⁺ ranged from 10 nM to 50 μM with a limit of detection as low as 5 nM. In addition, other ions were used as competitive substances to explore the selectivity of CDs for Fe³⁺. The fluorescence quenching effect of Fe³⁺ was much stronger, which demonstrated that the CDs had high selectivity for Fe³⁺ and they can be employed for the selective detection of Fe³⁺. The potential fluorescence quenching mechanism between CDs and Fe³⁺ was identified as the inner filter effect. The CDs were then used as a fluorescent sensor for the detection of Fe³⁺ in water samples and human serum; the recovery range was 93.76-113.80% (relative standard deviation less than 0.79%). These results indicate that the CDs can be applied for the sensitive and selective detection of Fe³⁺ in real samples. Moreover, on the basis of the redox reaction between Fe³⁺ and ascorbic acid (AA), the CD-Fe³⁺ system can be used as a fluorescent "off-on" sensor for the detection of AA with a limit of detection of 5 μM. What is more, because of their low toxicity and biocompatibility, the CDs can also be used for cell imaging and acted as a fluorescent probe for fluorescence imaging of Fe³⁺ and AA in living cells. These results demonstrate that the CDs have great potential for application in the fields of sensing, bioimaging, and even disease diagnosis.

Highly stable and selective measurement of Fe3+ ions under environmentally relevant conditions via an excitation-based multiwavelength method using N, S-doped carbon dots

Fast and accurate detection of Fe³⁺ under relevant natural conditions is important in environmental monitoring. In this study, an improved and simplified fluorescence method based on the multiwavelength luminescence in the visible region and the avoidance of the self-quenching property of N, S-doped carbon dots (NSC-Dots) was developed for the first time to determine Fe³⁺ concentration under varied environmental conditions. This method can simultaneously save time and provide accurate information. The as-prepared NSC-Dots exhibit two stable excitation peaks from 200 nm to 450 nm at a fixed emission wavelength (λ_em = 450 nm). A standard equation (R² = 0.995) can be derived by measuring the quenching degree of the two peaks and referring to Stern-Volmer theory. Thus, Fe³⁺ concentration was accurately determined. The interference of the environmentally relevant concentrations of other metal ions, humic acid, and pH on Fe³⁺ measurement was tested. Results showed that the standard equation can be used to accurately determine Fe³⁺ concentration within the range of the 95% prediction band. The fast and facile multiwavelength method may facilitate the real-time monitoring of Fe³⁺ concentration in complex water environments.

Bimetallic AuCu nanoclusters-based florescent chemosensor for sensitive detection of Fe3+ in environmental and biological systems

Assays of ferric ion (Fe³⁺) with high sensitivity and selectivity have been required to evaluate its amount in environmental and biological systems. Herein, a novel fluorometric penicillamine-capped bimetallic gold-copper nanoclusters (PA-AuCu bi-MNCs) sensor was constructed for facile, environmentally friendly and quantitative detection of Fe³⁺ through inner filter effect (IFE) mechanism. One-step green synthetic approach was applied for the synthesis of AuCu bi-MNCs by using d-penicillamine (D-PA) as template and stabilizer. In the presence of Fe³⁺, the emission of the PA-AuCu bi-MNCs was hindered that caused selective quenching of the fluorescence intensity. The response to Fe³⁺ allows for two linear dynamic ranges of 5.0 × 10^-7 M-7.0 × 10^-6 M and 7.0 × 10^-6 M-1.0 × 10^-4 M with a detection limit of 0.1 μM, which is approximately 53 times lower than the maximum level (5.37 μM) of Fe³⁺ in drinking water that had been reported by the World Health Organization. The independency of the system from most of the interferences is the important feature of this work. Beside the appropriate selectivity of the proposed method, it shows a considerable operation in various environmental samples including rain water, three types of river water and also in human blood serum as a biological matrix.

Fluorescent Sensors for the Detection of Heavy Metal Ions in Aqueous Media

Due to the risks that water contamination implies for human health and environmental protection, monitoring the quality of water is a major concern of the present era. Therefore, in recent years several efforts have been dedicated to the development of fast, sensitive, and selective sensors for the detection of heavy metal ions. In particular, fluorescent sensors have gained in popularity due to their interesting features, such as high specificity, sensitivity, and reversibility. Thus, this review is devoted to the recent advances in fluorescent sensors for the monitoring of these contaminants, and special focus is placed on those devices based on fluorescent aptasensors, quantum dots, and organic dyes.

Adiabatic and nonadiabatic charge separation dynamics in graphene oxide quantum dots for overall water splitting

Chemical functionalization and heteroatom doping are two effective strategies for improving the conductivity of a graphene lattice. Nitrogen-doped graphene oxide quantum dot (GOQD) has been reported to possess both p- and n-conductivity that is induced by an oxygen functional group and nitrogen doping, respectively, and is suitable for catalyzing hydrogen and oxygen evolution reactions for complete water splitting. The experimental study shows that the hydrogen evolution reaction occurs considerably faster than the oxygen evolution reaction. However, the mechanism of this phenomenon remains unknown, which poses a challenge to the chemical modification of such classes of materials. In the present work, we perform nonadiabatic ab initio molecular dynamics to explore the charge separation dynamics in N-doped GOQD with oxygen functional groups. Our results show that there exists multiple charge decay channels governed by different mechanisms, which complicates the overall charge separation dynamics in N-doped GOQD. The intramolecular electron transfer mainly occurs through the nonadiabatic channel, whereas the intramolecular hole transfer mainly occurs through the adiabatic channel. There is an additional adiabatic decay channel in the p-domain, which accelerates electron-hole recombination in the p-domain. We further calculated the decoherence times and found that the decoherence of intramolecular electron transfer occurs considerably faster than that of hole transfer, which slows the quantum transition of intramolecular electron transfer. Finally, we simulated the carrier relaxation times and found that the electron relaxation is approximately one order of magnitude longer than that of the hole relaxation. Our calculation rationalizes the experimentally observed higher catalytic activity towards the hydrogen evolution compared to the oxygen evolution. More importantly, the calculation explains the fundamental roles of nitrogen doping and oxygen functional groups in the adiabatic and nonadiabatic charge decay mechanisms.

Nitrogen and sulfur co-doped graphene quantum dots for the highly sensitive and selective detection of mercury ion in living cells

In this work, a novel nitrogen and sulfur co-doped graphene quantum dots (N,S/GQDs) were synthesized by a simple and green pyrolysis method with citric acid as carbon source, d‑penicillamine as doped molecule. The obtained N,S/GQDs shows good water solubility, low cytotoxicity and high quantum yield of 56.4%. The doping of N and S can efficient promoted the coordination between the residual group of N,S/GQDs and Hg²⁺, thus, the fluorescence of N,S/GQDs can be dramatically and selectively quenched by Hg²⁺. Under the optimum conditions, the quenching effect of Hg²⁺ to N,S/GQDs was lined with its concentrations in the range of 0.9 to 30 nM with a detection limit of 0.69 nM. 100 fold of common metals had no influence for the determination of Hg²⁺. When Hela cells were incubated into the N,S/GQDs solutions for 2 h, more than 85% Cells still kept living even at a high concentration of 400 μg/mL suggesting the good biocompatibility and low toxicity of the obtained N,S/GQDs. Besides this, the N,S/GQDs also showed good cell permeability and could enter into the cell and showed bright blue light. Thus, they were successfully applied as a powerful fluorescent nano-sensor for imaging detection of mercury ions in the living cells.

Miscanthus grass-derived carbon dots to selectively detect Fe3+ ions

Novel fluorescent carbon dots (CDs) were synthesized using an economically feasible and green one-step heating process. Miscanthus, a perennial grass and an inexpensive sustainable biomass, was utilized as the starting material to prepare CDs and doped CDs (nitrogen, phosphorous and nitrogen-phosphorous dual doped). The abundance of oxygen-containing functional groups in Miscanthus-derived CDs (MCD) and doped MCD was confirmed via Fourier-transform infrared (FTIR) and energy dispersive X-ray spectroscopy (EDS). The average size of MCD, N-doped MCD, P-doped MCD and dual-doped MCDs was found to be 7.87 ± 0.27, 4.6 ± 0.21, 6.7 ± 0.38 and 5.3 ± 0.32 nm, respectively. The synthesized MCD and doped MCD exhibited a quantum yield (QY) of 4.71, 11.65, 2.33 and 9.63% for the MCD, N-doped MCD, P-doped MCD and dual-doped MCD, respectively. MCD and doped MCD exhibited excellent excitation-dependent photoluminescence properties, with strong blue fluorescence upon irradiation with UV-light (365 nm). N-doped MCD exhibited superb selectivity towards Fe³⁺ ions, with a detection limit of 20 nM and a detection range from 0.02 to 2000 μM. The normalized linear relationship between the intensity of fluorescence emission of the prepared N-doped MCD and the concentration of Fe³⁺ ions was utilized to selectively and sensitively detect Fe³⁺ ions.

Fluorescent carbon dots for the selective and sensitive detection of Fe³⁺ ions with a wide detection range and very low detection limit.

A review on graphene-based nanocomposites for electrochemical and fluorescent biosensors

Biosensors with high sensitivity, selectivity and a low limit of detection, reaching nano/picomolar concentrations of biomolecules, are important to the medical sciences and healthcare industry for evaluating physiological and metabolic parameters.

Excitation-independent emission carbon nanoribbon polymer as a ratiometric photoluminescent probe for highly selective and sensitive detection of quercetin

In this study, sulfur–nitrogen co-doped carbon nanoribbon (SNCNR) polymers with stable dual-emission fluorescence were synthesized using a one-step traditional hydrothermal method of 6-mercaptopurine in an aqueous methanol solution.

Nitrogen and chlorine co-doped carbon dots as probe for sensing and imaging in biological samples

A facile one-step hydrothermal synthesis approach was proposed to prepare nitrogen and chlorine co-doped carbon dots (CDs) using l-ornithine hydrochloride as the sole precursor. The configuration and component of CDs were characterized by transmission electron microscopy and X-ray photoelectron and Fourier transform infrared spectroscopies. The obtained CDs (Orn-CDs) with a mean diameter of 2.1 nm were well monodispersed in aqueous solutions. The as-prepared CDs exhibited a bright blue fluorescence with a high yield of 60%, good photostability and low cytotoxicity. The emission of Orn-CDs could be selectively and effectively suppressed by Fe3+. Thus, a quantitative assay of Fe3+ was realized by this nanoprobe with a detection limit of 95.6 nmol l-1 in the range of 0.3-50 µmol l-1. Furthermore, ascorbic acid could recover the fluorescence of Orn-CDs suppressed by Fe3+, owing to the transformation of Fe3+ to Fe2+ by ascorbic acid. The limit of detection for ascorbic acid was 137 nmol l-1 in the range of 0.5-10 µmol l-1. In addition, the established method was successfully applied for Fe3+ and ascorbic acid sensing in human serum and urine specimens and for imaging of Fe3+ in living cells. Orn-CD-based sensing platform showed its potential to be used for biomedicine-related study because it is cost-effective, easily scalable and can be used without additional functionalization and sample pre-treatment.

Highly photoluminescent and temperature-sensitive P, N, B-co-doped carbon quantum dots and their highly sensitive recognition for curcumin

Temperature-sensitive P, N, B-co-doped carbon quantum dots (PNBCDs) synthesized using one-pot method exhibit many excellent features, such as strong fluorescence, good stability and sensitive detection for curcumin.

Design and synthesis of a vanadate-based ratiometric fluorescent probe for sequential recognition of Cu2+ ions and biothiols

YVO₄:Eu³⁺@CDs core–shell nanomaterial was synthesized through a simple self-assembly of carbon dots (CDs) with YVO₄:Eu³⁺, since the high affinity of oxygen-containing groups such as –COOH or –OH of CDs to the metal ions on the surface of YVO₄:Eu³⁺.

Sulfur-doped graphene quantum dot-based paper sensor for highly sensitive and selective detection of 4-nitrophenol in contaminated water and wastewater

4-Nitrophenol (4-NP) is a promulgated priority pollutant, which can cause a negative impact on human health. The development of a direct and effective technique for the rapid detection and screening of 4-NP is, therefore, of urgent need. In this study, the blue luminescent sulfur-doped graphene quantum dots (S-GQDs) with a size of 1–5 nm are fabricated using a one-step pyrolysis procedure in the presence of citric acid and 3-mercaptosuccinic acid. The S-GQDs exhibit a strong emission band at 450 nm under the excitation of 330 nm UV light. 4-NP can serve as the fluorescence quencher by the π–π interaction with S-GQD, resulting in the linear decrease in fluorescence intensity after the addition of various 4-NP concentrations ranging from 10 nM to 200 μM. The S-GQDs serve as the sensing probe to enhance the analytical performance on 4-NP detection with the limit of detection values of 0.7 and 3.5 nM in deionized water and wastewater, respectively. The S-GQD based sensing platform can be used to detect 4-NP in different matrices of water and wastewater. In addition, the detected percentages of spiked 4-NP concentrations in the presence of different matrices and interferences are in the range of (98 ± 5)–(108 ± 2)%. Moreover, the S-GQD based paper sensor can rapidly screen 4-NP in wastewater within 1 min. Results obtained in this study clearly demonstrate the superiority of S-GQDs as a promising fluorescence probe for highly sensitive and selective detection of a wide concentration range of 4-NP in deionized water and wastewater.

Sulfur-doped graphene quantum dots have been prepared for effective and rapid detection of 4-nitrophenol.

Electrochemical synthesis of multicolor fluorescent N-doped graphene quantum dots as a ferric ion sensor and their application in bioimaging

A novel electrochemical strategy for simple and facile synthesis of semicarbazide functionalized nitrogen-doped graphene quantum dots (N-GQDs) was reported, based on direct exfoliation and oxidation from graphite rods.

An integrated microfluidic device with solid-phase extraction and graphene oxide quantum dot array for highly sensitive and multiplex detection of trace metal ions

An integrated microfluidic device, consisting of a solid-phase extraction (SPE) unit for metal ion pretreatment, a micropump, a micromixer, and a detachable graphene oxide quantum dot (GOQD) array chip was constructed for selective and sensitive detection of As³⁺, Cd²⁺, and Pb²⁺. The entire process could be sequentially and automatically completed by actuating a pneumatic micropump. Effect of the pH for metal ion capture and pumping scheme for recovery efficiency were investigated on a chip. The ion As³⁺, Cd²⁺, and Pb²⁺ whose concentrations ranged from 10^-2 µM to 10² µM were successfully recovered with high efficiency over 80%. Monoplex and multiplex detection of As³⁺, Cd²⁺, and Pb²⁺ were then executed on a GOQD array chip. The target metal ions were specifically captured on the DNA aptamer linked GOQD array, which results in the fluorescence quenching of GOQD due to the electron transfer from the GOQD to metal ions under the laser irradiation. The proposed integrated SPE-GOQD array based microdevice could perform As³⁺, Cd²⁺, and Pb²⁺ detection with detection limits of 5.03 nM, 41.1 nM, and 4.44 nM, respectively. Simultaneous multiplex detection for binary or ternary mixture of As³⁺, Cd²⁺, and Pb²⁺ was performed, and the proposed integrated microdevice also showed high recovery values ranging from 83.52% to 128.3% from the environmental samples.

Carbon Nanomaterials in Optical Detection

Owing to their unique optical, electronic, mechanical, and chemical properties, flexible chemical modification, large surface coverage and ready cellular uptake, various carbon nanomaterials such as carbon nanotubes (CNTs), graphene and its derivatives, carbon dots (CDs), graphene quantum dots, fullerenes, carbon nanohorns (CNHs) and carbon nano-onions (CNOs), have been widely explored for use in optical detection. Most of them are based on fluorescence changes. In this chapter, we will focus on carbon nanomaterials-based optical detection applications, mainly including fluorescence sensing and bio-imaging. Moreover, perspectives on future exploration of carbon nanomaterials for optical detection are also given.

IRMOF-3: A fluorescent nanoscale metal organic frameworks for selective sensing of glucose and Fe (III) ions without any modification

The amine functionalized isoreticular metal-organic framework-3 (IRMOF-3) is synthesized by hydrothermal method. Till now, it's widely used in the area of gas separation, adsorption, and catalysis due to large surface area, structural stability, and tunability. Here, we have reported the use of fluorescent nanoscale IRMOF-3 for highly selective detection of glucose as well as Fe³⁺ ions without any modification. This is due to NH₂ and COOH groups are present on the surface of IRMOF-3 to bind cis-diols of the glucose molecule via host-guest interaction, and Fe³⁺ ions via ligand to metal charge transfer. The Synthesized IRMOF-3 has average diameter of 160 ± 20 nm and interestingly possess deep blue fluorescent emission spectra at 460 nm with quantum yield 17.3%. Using fluorometric assay, the limit of detection (LOD) of glucose and Fe³⁺ ions was found to be 0.56 μM and 4.2 nM respectively. More importantly, the synthesized IRMOF-3 is also utilized for detection of glucose and Fe³⁺ ions in bio-environmental samples.

Nitrogen-Doped Carbon Nanoparticles Derived from Silkworm Excrement as On⁻Off⁻On Fluorescent Sensors to Detect Fe(III) and Biothiols

On⁻off⁻on fluorescent sensors based on emerging carbon nanoparticles (CNPs) or carbon dots (CDs) have attracted extensive attention for their convenience and efficiency. In this study, dumped silkworm excrement was used as a novel precursor to prepare fluorescent nitrogen-doped CNPs (N-CNPs) through hydrothermal treatment. The obtained N-CNPs showed good photoluminescent properties and excellent water dispersibility. Thus, they were applied as fluorescence “on⁻off⁻on” probes for the detection of Fe(III) and biothiols. The “on⁻off” process was achieved by adding Fe(III) into N-CNP solution, which resulted in the selective fluorescence quenching, with the detection limit of 0.20 μM in the linear range of 1⁻500 μM. Following this, the introduction of biothiols could recover the fluorescence efficiently, in order to realize the “off⁻on” process. By using glutathione (GSH) as the representative, the linear range was in the range of 1⁻1000 μM, and the limit of detection was 0.13 μM. Moreover, this useful strategy was successfully applied for the determination of amounts of GSH in fetal calf serum samples.