Adsorption of 4-n-Nonylphenol and Bisphenol-A on Magnetic Reduced Graphene Oxides: A Combined Experimental and Theoretical Studies

Comparison of carbonized materials from wastes of different origin for nonylphenol removal by adsorption

The application of carbonized materials (CMs) from solid wastes for the control of hydrophobic organic contaminants is a promising way to treat wastes. In this paper, the physicochemical properties of CMs prepared from industry (fly ash and sewage sludge), plant (rice straw and bamboo fragments), and livestock (chicken manure) were analyzed, their adsorption capacities for nonylphenol were studied, and the relationship between the adsorption capacity and the physicochemical properties of different types of CMs was investigated. The results showed that the adsorption capacities of CMs prepared from plant solid wastes (rice straw and bamboo fragments) far exceeded those of the industrial and livestock solid wastes. The parameter K_f obtained by the Freundlich model showed a significant and positive correlation with carbon content (C%), carboxyl content, specific surface area (SSA), and pore volume, and a negative correlation with ash content (ash%). Compared with CMs produced by the other two types of solid wastes, CMs from the plant solid wastes had the characteristics of a large SSA, rich pore structure (especially mesoporous) and high aromaticity (high C%), which were the main reasons for their superior adsorption capacity. The results could provide a scientific basis for the utilization of solid wastes.

pH-dependent KOW provides new insights in understanding the adsorption mechanism of ionizable organic chemicals on carbonaceous materials

The dominant adsorption mechanism of ionizable organic chemicals (IOCs) on carbonaceous materials is still unclear. This study used benzoic acid (BA), o-chlorobenzoic acid (2-CBA) and p-chlorobenzoic acid (4-CBA) as representatives of IOCs to investigate the dominant adsorption mechanism on graphene oxide (GO) and graphite (GP), with a specific emphasis on the impact of pH-dependent K_OW. The order of apparent adsorption of the investigated chemicals changed with pH, which could not be explained by their constant K_OW. According to our measurement, K_OW varied greatly with pH. The pH-dependent adsorption of BA, 2-CBA and 4-CBA were significantly correlated with pH-dependent K_OW for both GO and GP. Our observations indicated that the hydrophobic effects may dominate the apparent adsorption of BA, 2-CBA and 4-CBA on GO and GP. Electrostatic repulsion played a minor role in their reduced adsorption at high pH. Negative charge-assisted H-bond and π-π interactions may explain the adsorption of negatively charged BA, 2-CBA and 4-CBA on negatively charged GO. This study implied that pH-dependent K_OW rather than constant K_OW should be incorporated to understand IOC adsorption as affected by pH.

New insights into bisphenols removal by nitrogen-rich nanocarbons: Synergistic effect between adsorption and oxidative degradation

In this work, nitrogen-rich graphene-like carbon sheets (N-GLCS) with high specific surface area (488.4m²/g), narrow pore distribution and high N-doping (18.4 at%) were prepared and applied as both adsorbent and catalyst for the removal of bisphenols. Adsorption experiments demonstrated the high adsorption capacities of the N-GLCS toward bisphenol F (BPF) (222.9mg/g), bisphenol A (BPA) (317.8mg/g), and bisphenol C (BPC) (540.4mg/g). Results showed that about 98.6% of BPA (70mg/L) was removed at pH 7.0 within 80min after the adsorption-catalytic degradation process. The N-GLCS also showed a superb reusability for the catalytic oxidative degradation of BPA (70mg/L) with the removal percentage maintains over 83% after 5 cycles. With the synergistic combination of the excellent adsorption and catalytic properties of the N-GLCS, trace amount of pollutants can be preconcentrated and immobilized at the surface of N-GLCs, at the same time, active radicals were also produced at the surface of the N-GLCS by the activation of peroxydisulfate (PS), and finally the pollutants can be degraded in-situ by the active radicals. These findings provide a new avenue towards the efficient removal of trace-level EDCs from water solution by using the coupled adsorption-advanced oxidation processes.

Water treatment by new-generation graphene materials: hope for bright future

Water is the most important and essential component of earth's ecosystem playing a vital role in the proper functioning of flora and fauna. But, our water resources are contaminating continuously. The whole world may be in great water scarcity after few decades. Graphene, a single-atom thick carbon nanosheet, and graphene nanomaterials have bright future in water treatment technologies due to their extraordinary properties. Only few papers describe the use of these materials in water treatment by adsorption, filtration, and photodegradation methods. This article presents a critical evaluation of the contribution of graphene nanomaterials in water treatment. Attempts have been made to discuss the future perspectives of these materials in water treatment. Besides, the efforts are made to discuss the nanotoxicity and hazards of graphene-based materials. The suggestions are given to explore the full potential of these materials along with precautions of nanotoxicity and its hazards. It was concluded that the future of graphene-based materials is quite bright.

Stable Molecular Diodes Based on π-π Interactions of the Molecular Frontier Orbitals with Graphene Electrodes

In molecular electronics, it is important to control the strength of the molecule-electrode interaction to balance the trade-off between electronic coupling strength and broadening of the molecular frontier orbitals: too strong coupling results in severe broadening of the molecular orbitals while the molecular orbitals cannot follow the changes in the Fermi levels under applied bias when the coupling is too weak. Here, a platform based on graphene bottom electrodes to which molecules can bind via π-π interactions is reported. These interactions are strong enough to induce electronic function (rectification) while minimizing broadening of the molecular frontier orbitals. Molecular tunnel junctions are fabricated based on self-assembled monolayers (SAMs) of Fc(CH₂ )₁₁ X (Fc = ferrocenyl, X = NH₂ , Br, or H) on graphene bottom electrodes contacted to eutectic alloy of gallium and indium top electrodes. The Fc units interact more strongly with graphene than the X units resulting in SAMs with the Fc at the bottom of the SAM. The molecular diodes perform well with rectification ratios of 30-40, and they are stable against bias stressing under ambient conditions. Thus, tunnel junctions based on graphene with π-π molecule-electrode coupling are promising platforms to fabricate stable and well-performing molecular diodes.

Magnetism-tuning strategies for graphene oxide based on magnetic oligoacene oxide patches model

Graphene oxide (GO) has wide application potential owing to its 2D structure and diverse modification sites for various targeted uses. The introduction of magnetism into GO structures has further advanced the controllability of the application of GO materials. Herein, the concept of modular design and modeling was applied to tune the magnetism of GO. To obtain desirable magnetic properties, diradical-structured GO patches were formed by the introduction of two functional groups to break the Kekule structure of the benzene ring. In these diradical GO patches, the energy of the triplet state was lower than those of the open-shell broken-symmetry singlet state and closed-shell singlet state. To create such multi-radical patches, a practical approach is to determine a substantial spatial separation of the α and β spin densities in the molecule. Thus, systematic design strategies and tests were evaluated. The first strategy was extending the distance between the distribution center of the α and β spin densities; the second was controlling the delocalization directions of the α and β electrons; the third was controlling the delocalization extension of the α and β electrons by oxidative modification, and finally introducing multi-radical structures into the molecular system and controlling the position of each radical. Herein, successful molecular models with a large magnetic coupling constant (∼3600 cm^-1) were obtained. This study paves the way to explore ferromagnetic MGO guided by theoretical study, which may become reality soon.

Study on adsorption of rhodamine B onto Beta zeolites by tuning SiO2/Al2O3 ratio

The exploration of the relationship between zeolite composition and adsorption performance favored to facilitate its better application in removal of the hazardous substances from water. The adsorption capacity of rhodamine B (RB) onto Beta zeolite from aqueous solution was reported. The relationship between SiO₂/Al₂O₃ ratio and adsorption capacity of Beta zeolite for RB was explored. The structure and physical properties of Beta zeolites with various SiO₂/Al₂O₃ ratios were determined by XRD, FTIR, TEM, BET, UV-vis and so on characterizations. The adsorption behavior of rhodamine B onto Beta zeolite matched to Langmuir adsorption isotherm and more suitable description for the adsorption kinetics was a pseudo-second-order reaction model. The maximum adsorption capacity of the as-prepared Beta zeolite with SiO₂/Al₂O₃ = 18.4 was up to 27.97mg/g.

Size characterization of silver nanoparticles after separation from silver ions in environmental water using magnetic reduced graphene oxide

This study involved the synthesis of magnetic reduced graphene oxide (M-rGO) using a co-precipitation method and examined its resultant adsorption properties for mixtures containing silver ions and silver nanoparticles (AgNPs). The results indicate that M-rGO preferentially adsorbs silver ions in mixtures containing AgNPs, enabling the size characterization of smaller AgNPs (<60nm) at ultra-trace concentration levels to be more attainable. The sorbents after adsorption could be easily recovered through an external magnet. The AgNPs retained in solution were characterized using single-particle ICPMS (SP-ICPMS). The adsorption behavior of silver ions on M-rGO was well fitted with the pseudo-second-order kinetic model and the Freundlich adsorption isotherm model, with the conclusion that the adsorption of silver ions occurred primarily through the chemical bond effect and the heterogeneous surface of the sorbent. Finally, the application of M-rGO with the approach developed herein to actual environmental water samples was successful.

Fabrication of a magnetite/diazonium functionalized-reduced graphene oxide hybrid as an easily regenerated adsorbent for efficient removal of chlorophenols from aqueous solution

A magnetic hybrid nanomaterial, which contains magnetite (Fe₃O₄) particles and diazonium functionalized-reduced graphene oxide (DF-RGO), was fabricated via a three-pot reaction. First, the reduced graphene oxide (RGO) was synthesized via a redox reaction. Second, diazonium functionalized-RGO was prepared via a feasible chemical reaction. Third, Fe₃O₄ particles were loaded onto the surface of DF-RGO by covalent bonding, fabricating the M-DF-RGO hybrid. The fabricated hybrid was characterized by SEM, TEM, AFM, XRD, XPS, FT-IR, TGA, Raman spectroscopy, and magnetometry. The resulting M-DF-RGO hybrid possessed unique magnetic properties and was applied to remove 4-chlorophenol (4-CP) and 2,4-dichlorophenol (2,4-DCP) from aqueous solution. The adsorption of 4-CP and 2,4-DCP on the M-DF-RGO hybrid was performed under various conditions, with respect to initial chlorophenol concentration, pH, and contact time. The results suggest that the adsorption of 4-CP and 2,4-DCP onto the M-DF-RGO hybrid is strongly dependent on pH and weakly dependent on contact time. In addition, the adsorption isotherm of 4-CP and 2,4-DCP on the M-DF-RGO hybrid fits the Freundlich model well and the adsorption capacities of 4-CP and 2,4-DCP on M-DF-RGO reached 55.09 and 127.33 mg g⁻¹, respectively, at pH 6 and 25 °C. In this situation, intermolecular interactions including π–π interactions and hydrogen bonding are operative. The calculated results of density functional theory further demonstrate that 2,4-DCP molecules could be more easily absorbed than 4-CP molecules by the M-DF-RGO hybrid. Moreover, the M-DF-RGO hybrid could be easily separated by a magnetic separation process, and showed good recyclability of more than five cycles.

A magnetite/diazonium functionalized-reduced graphene oxide hybrid is an easily regenerated and recyclable adsorbent for removal of chlorophenols from aqueous solution.

Adsorption of aniline from aqueous solution using graphene oxide-modified attapulgite composites

Adsorption is an efficient treatment method for aniline removal in water treatment.

Evaluation of the sorption mechanism of ionic liquids onto multi-walled carbon nanotubes

The knowledge of the sorption mechanism of different chemicals onto third generation carbon sorbents such as carbon nanotubes (CNTs) is needed in order to project systems for the effective removal of pollutants from the environment. This paper reports evaluation of the sorption mechanism of selected ionic liquids (ILs), being considered as potential pollutant in environment, onto various CNTs. CNTs characterized by the smallest diameter and the biggest surface area showed the highest sorption capacity to isolate ILs from an aqueous solution. CNTs with a bigger diameter, a functionalized surface and particularly a helical shape showed a lower sorption capacity. The sorption mechanism has been defined as complex, including van der Waals, π-π and electrostatic interactions with dominating π-π interactions. Due to the relatively high sorption coefficient (355.98 ± 20.69-6397.10 ± 355.42 L kg^-1 depending on the IL) the study showed that multi-walled carbon nanotubes can potentially be used to effectively isolate ILs from an aqueous solution. Moreover, proved in this study, the fast sorption kinetic, and uncomplicated regeneration process, leading to an even higher sorption capacity, means that CNTs are promising material which could find potential applications in the treatment of water contaminated by ILs.

Experimental and theoretical calculation investigation of 2,4-dichlorophenoxyacetic acid adsorption onto core–shell carbon microspheres@layered double hydroxide composites

Layered double hydroxides (LDHs) usually aggregate irregularly and hardly redisperse in water. Moreover, the affinity of LDHs is poor for organic compounds. In this study, three different core–shell composites, i.e. CMS@MgAl–LDH, CMS@NiAl–LDH, and CMS@ZnAl–LDH, were synthesized by direct fabrication of LDH nanoplatelets onto carbon microspheres (CMS) for the removal of the adsorbed 2,4-dichlorophenoxyacetic acid (2,4-D). The CMS@LDH composites show good water-dispersity due to the 3D hierarchical sphere structure and high affinity for 2,4-D due to the organic carbon cores that possess abundant hydrophobic compounds. It was found that the adsorption process was rapid, and the time required to reach the sorption equilibrium was within 100 min. The theoretical DFT calculation analysis suggested that the adsorption of 2,4-D on the CMS@LDH composites was dominated by π–π interactions, ion-exchange, and hydrogen bonding. The core–shell CMS@LDH composites can serve as a promising adsorbent that offers a rapid and effective adsorption capacity for the removal of 2,4-D in an aqueous solution.

The core–shell CMS@LDH composites were successfully synthesized and exhibited an excellent adsorption performance for 2,4-D.

Adsorption and degradation of 14C-bisphenol A in a soil trench

Bisphenol A (BPA) has caused widespread concern among scholars as a result of its estrogenic toxicity. It exists mainly in natural waters, sediments, and soil, as well as sewage and wastewater sludge. Considering that BPA is a common environmental pollutant that is removed along with chemical oxygen demand (COD), nitrogen, and phosphorus in drainage treatment systems, it is important to research the fate of BPA in sewage treatment systems. In this research, laboratory batch experiments on soil degradation and adsorption were conducted with ¹⁴C-BPA, aiming to discuss the transport and degradation characteristics of BPA in both simulated facilities and a soil trench. Based on the experimental results, the Freundlich model could be applied to fit the isothermal adsorption curve of the BPA in soil. A low mobility characteristic of BPA was discovered. The mineralization rate of BPA was fast and that of the reaction showed small fluctuations. After degradation, 21.3 and 17.7% of the BPA groups (the experimental group treated with ammonia oxidase (AMO) inhibitor and the control group) were converted into ¹⁴CO₂, respectively. This indicates that the nitrification and degradation of BPA had a certain competitive relationship. Besides, nitrification did not significantly affect the soil residue of BPA. Through the soil trench test, the average removal rate of BPA in the soil trench was 85.5%. ¹⁴CO₂ was discharged via the mineralization of BPA, accounting for 2.5% of the initial input. BPA easily accumulated in the bottom soil of the soil trench. BPA and its metabolites in the effluent accounted for 14.5% of the initial dosage. The residual extractable BPA and its metabolites in the soil accounted for 51.3%, and the remaining part of the unextractable residue represented 19.8% of the initial radioactive dosage.

Adsorption of organic contaminants by graphene nanosheets: A review

Graphene nanosheets (GNS) such as graphenes and graphene oxides (GOs) have been widely investigated as next-generation adsorbents in both water and wastewater treatment processes due to their unique physicochemical properties and their affinity towards different classes of organic contaminants (OCs). In the last five years, more than 40 articles investigating adsorption of different classes of OCs by graphene and GO were published in peer-reviewed journals. Adsorption mechanisms were controlled by molecular properties of OCs (e.g., aromatic vs aliphatic, molecular size and hydrophobicity), characteristics of adsorbents (e.g., surface area, pore size distribution, and surface functional groups), and background solution properties (e.g., pH, ionic strength, surfactants, NOM, and temperature). This literature survey includes: (i) a summary of adsorption of OCs by GNS, (ii) a comprehensive discussion of the mechanisms and factors controlling the adsorption of OCs by GNS and a comparison of their adsorption behaviors with those of CNT. This literature survey also identifies future research needs and challenges on the adsorption of OCs by GNS.

Efficient Removal of Tetracycline from Aqueous Media with a Fe₃O₄ Nanoparticles@graphene Oxide Nanosheets Assembly

A readily separated composite was prepared via direct assembly of Fe₃O4 magnetic nanoparticles onto the surface of graphene oxide (GO) (labeled as Fe₃O₄@GO) and used as an adsorbent for the removal of tetracycline (TC) from wastewater. The effects of external environmental conditions, such as pH, ionic strength, humic acid (HA), TC concentration, and temperature, on the adsorption process were studied. The adsorption data were analyzed by kinetics and isothermal models. The results show that the Fe₃O₄@GO composite has excellent sorptive properties and can efficiently remove TC. At low pH, the adsorption capacity of Fe₃O₄@GO toward TC decreases slowly with increasing pH value, while the adsorption capacity decreases rapidly at higher pH values. The ionic strength has insignificant effect on TC adsorption. The presence of HA affects the affinity of Fe₃O₄@GO to TC. The pseudo-second-order kinetics model and Langmuir model fit the adsorption data well. When the initial concentration of TC is 100 mg/L, a slow adsorption process dominates. Film diffusion is the rate limiting step of the adsorption. Importantly, Fe₃O₄@GO has good regeneration performance. The above results are of great significance to promote the application of Fe₃O₄@GO in the treatment of antibiotic wastewater.

Adsorption Behaviors of Organic Micropollutants on Zirconium Metal-Organic Framework UiO-66: Analysis of Surface Interactions

Herein, we studied the adsorption behaviors of organic micropollutants, such as anticonvulsant carbamazepine (CBZ) and antibiotic tetracycline hydrochloride (TC), on zirconium metal-organic framework UiO-66 in water. The maximum adsorption capacities of CBZ and TC on the UiO-66 were 37.2 and 23.1 mg·g^-1 at 25 °C, respectively. The adsorption isotherms and kinetics of CBZ and TC were well described by using the Langmuir model and pseudo-second-order model, respectively, and the adsorptions on UiO-66 are endothermic reactions. The adsorption capacities of CBZ and TC on UiO-66 were decreased with the increase of solution pH. The presence of humic acid could improve the adsorption of CBZ and TC on UiO-66, but K⁺ ion inhibited their adsorption obviously. In addition, Ca²⁺ and Al³⁺ ions also suppressed the adsorption of TC on UiO-66. The competitive adsorption suggested that the adsorption sites for CBZ on UiO-66 were different from those for TC. The surface interactions between UiO-66 and the two micropollutants were demonstrated by powder X-ray diffraction, Fourier transform infrared (FT-IR) spectra, scanning electron microscopy, nitrogen adsorption/desorption isotherms, and X-ray photoelectron (XPS) spectra. The characterizations showed that the adsorption of CBZ on UiO-66 is mainly a physisorption, and the hydrophobic effect played a crucial role during the adsorption of CBZ; meanwhile weak π-π electron donor-acceptor interaction and electrostatic attraction also existed. However, the adsorption of TC on UiO-66 is mainly a chemisorption; in addition to the strong electrostatic attraction and π-π electron donor-acceptor interaction forces, the nitrogenous groups of TC played an important role, which can replace the carboxylic groups coordinated with Zr-O clusters. The obtained results will aid us to comprehend the surface interaction between organic micropollutants and UiO-66 and expand the application of UiO-66 as sorbent for removal of pollutants from water.

One-pot synthesis of trifunctional chitosan-EDTA-β-cyclodextrin polymer for simultaneous removal of metals and organic micropollutants

The global contamination of water resources with inorganic and organic micropollutants, such as metals and pharmaceuticals, poses a critical threat to the environment and human health. Herein, we report on a bio-derived chitosan-EDTA-β-cyclodextrin (CS-ED-CD) trifunctional adsorbent fabricated via a facile and green one-pot synthesis method using EDTA as a cross-linker, for the adsorption of toxic metals and organic micropollutants from wastewater. In this system, chitosan chain is considered as the backbone, and the immobilized cyclodextrin cavities capture the organic compounds via host-guest inclusion complexation, while EDTA-groups complex metals. The thoroughly characterized CS-ED-CD was employed for batch adsorption experiments. The adsorbent displayed a monolayer adsorption capacity of 0.803, 1.258 mmol g-1 for Pb(II) and Cd(II) respectively, while a heterogeneous sorption capacity of 0.177, 0.142, 0.203, 0.149 mmol g-1 for bisphenol-S, ciprofloxacin, procaine, and imipramine, respectively. The adsorption mechanism was verified by FT-IR and elemental mapping. Importantly, the adsorbent perform is effective in the simultaneous removal of metals and organic pollutants at environmentally relevant concentrations. All these findings demonstrate the promise of CS-ED-CD for practical applications in the treatment of micropollutants. This work adds a new insight to design and preparation of efficient trifunctional adsorbents from sustainable materials for water purification.

Plasma-Facilitated Synthesis of Amidoxime/Carbon Nanofiber Hybrids for Effective Enrichment of 238U(VI) and 241Am(III)

Plasma- and chemical-grafted amidoxime/carbon nanofiber hybrids (p-AO/CNFs and c-AO/CNFs) were utilized to remove ²³⁸U(VI) and ²⁴¹Am(III) from aqueous solutions, seawater, and groundwater. Characteristic results indicated more nitrogen-containing groups in p-AO/CNFs compared to c-AO/CNFs. The maximum adsorption capacities of p-AO/CNFs at pH 3.5 and T = 293 K (588.24 mg of ²³⁸U(VI)/g and 40.79 mg of ²⁴¹Am(III)/g from aqueous solutions, respectively) were significantly higher than those of c-AO/CNFs (263.18 and 22.77 mg/g for ²³⁸U(VI) and ²⁴¹Am(III), respectively), which indicated that plasma-grafting was a highly effective, low-cost, and environmentally friendly method. Adsorption of ²³⁸U(VI) on AO/CNFs from aqueous solutions was significantly higher than that of ²³⁸U(VI) from seawater and groundwater; moreover, AO/CNFs displayed the highest effective selectivity for ²³⁸U(VI) compared to the other radionuclides. Adsorption of ²³⁸U(VI) onto AO/CNFs created inner-sphere complexes (e.g., U-C shells) as shown by X-ray absorption fine structure analysis, which was supported by surface complexation modeling. Three inner-sphere complexes gave excellent fits to pH-edge and isothermal adsorption of ²³⁸U(VI) on the AO/CNFs. These observations are crucial for the utilization of plasma-grafted, AO-based composites in the preconcentration and immobilization of lanthanides and actinides in environmental remediation.

Green synthesis of graphene from recycled PET bottle wastes for use in the adsorption of dyes in aqueous solution

Polyethyleneterephthalate (PET) is an important component of post-consumer plastic waste. This study focuses on the potential of utilizing "waste-treats-waste" by synthesis of graphene using PET bottle waste as a source material. The synthesized graphene is characterized by SEM, TEM, BET, Raman, TGA, and FT-IR. The adsorption of methylene blue (MB) and acid blue 25 (AB25) by graphene is studied and parameters such as contact time, adsorbent dosage were optimized. The Response Surface Methodology (RSM) is applied to investigate the effect of three variables (dye concentration, time and temperature) and their interaction on the removal efficiency. Adsorption kinetics and isotherm are followed a pseudo-second-order model and Langmuir and Freundlich isotherm models, respectively. Thermodynamic parameters demonstrated that adsorption of dye is spontaneous and endothermic in nature. The plastic waste can be used after transformation into valuable carbon-based nanomaterials for use in the adsorption of organic contaminants from aqueous solution.

Unveiling Adsorption Mechanisms of Organic Pollutants onto Carbon Nanomaterials by Density Functional Theory Computations and Linear Free Energy Relationship Modeling

Predicting adsorption of organic pollutants onto carbon nanomaterials (CNMs) and understanding the adsorption mechanisms are of great importance to assess the environmental behavior and ecological risks of organic pollutants and CNMs. By means of density functional theory (DFT) computations, we investigated the adsorption of 38 organic molecules (aliphatic hydrocarbons, benzene and its derivatives, and polycyclic aromatic hydrocarbons) onto pristine graphene in both gaseous and aqueous phases. Polyparameter linear free energy relationships (pp-LFERs) were developed, which can be employed to predict adsorption energies of aliphatic and aromatic hydrocarbons on graphene. Based on the pp-LFERs, contributions of different interactions to the overall adsorption were estimated. As suggested by the pp-LFERs, the gaseous adsorption energies are mainly governed by dispersion and electrostatic interactions, while the aqueous adsorption energies are mainly determined by dispersion and hydrophobic interactions. It was also revealed that curvature of single-walled carbon nanotubes (SWNTs) exhibits more significant effects than the electronic properties (metallic or semiconducting) on gaseous adsorption energies, and graphene has stronger adsorption abilities than SWNTs. The developed models may pave a promising way for predicting adsorption of environmental chemicals onto CNMs with in silico techniques.

Adsorption of tricresyl phosphate onto graphene nanomaterials from aqueous solution

Phosphorus flame retardant tricresyl phosphate (TCP) adsorption on graphene nanomaterials from aqueous solutions was explored using batch and column modes. Comparative studies were performed regarding the kinetics and equilibrium of TCP adsorption on graphene oxide (GO) and graphene (G) in batch mode. The adsorption kinetics exhibited a rapid TCP uptake, and experimental data were well described by the pseudo-second-order kinetic model. Adsorption isotherm data of TCP on the two adsorbents displayed an improved TCP removal performance with increasing temperature at pH 5, while experimental data were well described by the Langmuir isotherm model with a maximum adsorption capacity of 87.7 mg·g^-1 for G, and 30.7 mg·g^-1 for GO) at 303 K. The thermodynamic parameters show that the adsorption reaction is a spontaneous and endothermic process. In addition, dynamic adsorption of TCP in a fixed G column confirmed a faster approach to breakthrough at high flow rate, high influent TCP concentration, and low filling height of adsorbent. Breakthrough data were successfully described by the Thomas and Yoon-Nelson models.

New Synthesis of nZVI/C Composites as an Efficient Adsorbent for the Uptake of U(VI) from Aqueous Solutions

New nanoscale zerovalent iron/carbon (nZVI/C) composites were successfully prepared via heating natural hematite and pine sawdust at 800 °C under nitrogen conditions. Characterization by SEM, XRD, FTIR, and XPS analyses indicated that the as-prepared nZVI/C composites contained a large number of reactive sites. The lack of influence of the ionic strength revealed inner-sphere complexation dominated U(VI) uptake by the nZVI/C composites. Simultaneous adsorption and reduction were involved in the uptake process of U(VI) according to the results of XPS and XANES analyses. The presence of U-C/U-U shells demonstrated that innersphere complexation and surface coprecipitation dominated the U(VI) uptake at low and high pH conditions, respectively. The uptake behaviors of U(VI) by the nZVI/C composites were fitted well by surface complexation modeling with two weak and two strong sites. The maximum uptake capacity of U(VI) by the nZVI/C composites was 186.92 mg/g at pH 4.0 and 328 K. Additionally, the nZVI/C composites presented good recyclability and recoverability for U(VI) uptake in regeneration experiments. These observations indicated that the nZVI/C composites can be considered as potential adsorbents to remove radionuclides for environmental remediation.

Adsorption of emerging contaminant metformin using graphene oxide

The occurrence of emerging contaminants in our water resources poses potential threats to the livings. Due to the poor treatment in wastewater management, treatment technologies are needed to effectively remove these products for living organism safety. In this study, Graphene oxide (GO) was tested for the first time for its capacity to remove a kind of emerging wastewater contaminants, metformin. The research was conducted by using a series of systematic adsorption and kinetic experiments. The results indicated that GO could rapidly and efficiently reduce the concentration of metformin, which could provide a solution in handling this problem. The uptake of metformin on the graphene oxide was strongly dependent on temperature, pH, ionic strength, and background electrolyte. The adsorption kinetic experiments revealed that almost 80% removal of metformin was achieved within 20 min for all the doses studied, corresponding to the relatively high k₁ (0.232 min^-1) and k₂ (0.007 g mg^-1 min^-1) values in the kinetic models. It indicated that the highest adsorption capacity in the investigated range (q_m) of GO for metformin was at pH 6.0 and 288 K. Thermodynamic study indicated that the adsorption was a spontaneous (ΔG⁰ < 0) and exothermic (ΔH⁰ < 0) process. The adsorption of metformin increased when the pH values changed from 4.0 to 6.0, and decreased adsorption were observed at pH 6.0-11.0. GO still exhibited excellent adsorption capacity after several desorption/adsorption cycles. Besides, both so-called π-π interactions and hydrogen bonds might be mainly responsible for the adsorption of metformin onto GO.

Study on the removal of organic micropollutants from aqueous and ethanol solutions by HAP membranes with tunable hydrophilicity and hydrophobicity

A biocompatible and uniquely defined hydroxyapatite (HAP) adsorption membrane with a sandwich structure was developed for the removal of organic micropollutants for the first time. Both the adsorption and membrane technique were used for the removal of organic micropollutants. The hydrophilicity and hydrophobicity of the HAP adsorbent and membrane were tunable by controlling the surface structure of HAP. The adsorption of organic micropollutants on the HAP adsorbent was studied in batch experiments. The adsorption process was fit with the Freundlich model, while the adsorption kinetics followed the pseudo-second-order model. The HAP membrane could remove organic micropollutants effectively by dynamic adsorption in both aqueous and ethanol solutions. The removal efficiencies of organic micropollutants depended on the solution composition, membrane thickness and hydrophilicity, flow rate, and the initial concentration of organic micropollutants. The adsorption capacities of the HAP membrane with a sandwich structure (membrane thickness was 0.3 mm) were 6700, 6510, 6310, 5960, 5490, 5230, 4980 and 4360 L m-2 for 1-naphthyl amine, 2-naphthol, bisphenol S, propranolol hydrochloride, metolachlor, ethinyl oestradiol, 2,4-dichlorophenol and bisphenol A, respectively, when the initial concentration was 3.0 mg L-1. The biocompatible HAP adsorption membrane can be easily regenerated by methanol and was thus demonstrated to be a novel concept for the removal of organic micropollutants from both aqueous and organic solutions.

Graphene oxide coated with porous iron oxide ribbons for 2, 4-Dichlorophenoxyacetic acid (2,4-D) removal

Graphene oxide (GO) was prepared from commercially available graphite powder. Porous iron oxide ribbons were grown on the surface of GO by solvothermal process. The prepared GO-Fe₃O₄ nanocomposites are characterized by FT-IR, XRD, VSM, SEM, TEM, Raman spectroscopy, surface functionality and zero point charge studies. The morphology of the iron oxide ribbons grown on GO is demonstrated with TEM at various magnifications. The presence of magnetite nanoparticles is evident from XRD peaks and the magnetization value is found to be 37.28emu/g. The ratio of intensity of D-peak to G-peak from Raman spectrum is 0.995. The synthesized Graphene oxide-Fe₃O₄ nanocomposites (GO-Fe₃O₄) were explored for its surface adsorptive properties by using a model organic compound, 2,4-Dichlorophenoxy acetic acid (2,4-D) from aqueous solution. Batch adsorption studies were performed and the equilibrium data are modelled with Langmuir, Freundlich and Temkin isotherms. The maximum monolayer capacity from Langmuir isotherm is 67.26mg/g. Kinetic studies were also carried out and the studied adsorption process followed pseudo second-order rate equation. Mechanism of the adsorption process is studied by fitting the data with intraparticle diffusion model and Boyd plot. The studied adsorption process is both by film diffusion and intraparticle diffusion.

Macroscopic, Spectroscopic, and Theoretical Investigation for the Interaction of Phenol and Naphthol on Reduced Graphene Oxide

Interaction of phenol and naphthol with reduced graphene oxide (rGO), and their competitive behavior on rGO were examined by batch experiments, spectroscopic analysis and theoretical calculations. The batch sorption showed that the removal percentage of phenol or naphthol on rGO in bisolute systems was significantly lower than those of phenol or naphthol in single-solute systems. However, the overall sorption capacity of rGO in bisolute system was higher than single-solute system, indicating that the rGO was a very suitable material for the simultaneous elimination of organic pollutants from aqueous solutions. The interaction mechanism was mainly π-π interactions and hydrogen bonds, which was evidenced by FTIR, Raman and theoretical calculation. FTIR and Raman showed that a blue shift of C═C and -OH stretching modes and the enhanced intensity ratios of I_D/I_G after phenols sorption. The theoretical calculation indicated that the total hydrogen bond numbers, diffusion constant and solvent accessible surface area of naphthol were higher than those of phenol, indicating higher sorption affinity of rGO for naphthol as compared to phenol. These findings were valuable for elucidating the interaction mechanisms between phenols and graphene-based materials, and provided an essential start in simultaneous removal of organics from wastewater.

The role of graphene oxide and graphene oxide-based nanomaterials in the removal of pharmaceuticals from aqueous media: a review

In this review paper, the ill effects of pharmaceuticals (PhAs) on the environment and their adsorption on graphene oxide (GO) and graphene oxide-based (GO-based) nanomaterials have been summarised and discussed. The adsorption of prominent PhAs discussed herein includes beta-blockers (atenolol and propranolol), antibiotics (tetracycline, ciprofloxacin and sulfamethoxazole), pharmaceutically active compounds (carbamazepine) and analgesics such as diclofenac. The adsorption of PhAs strictly depends upon the experimental conditions such as pH, adsorbent and adsorbate concentrations, temperature, ionic strength, etc. To understand the adsorption mechanism and feasibility of the adsorption process, the adsorption isotherms, thermodynamics and kinetic studies were also considered. Except for some cases, GO and its derivatives show excellent adsorption capacities for PhAs, which is crucial for their applications in the environmental pollution cleanup.