Luminescent Metal Nanoclusters with Aggregation-Induced Emission

Recent Advances in Electrochemiluminescence and Chemiluminescence of Metal Nanoclusters

Metal nanoclusters (NCs), including Au, Ag, Cu, Pt, Ni and alloy NCs, have become more and more popular sensor probes with good solubility, biocompatibility, size-dependent luminescence and catalysis. The development of electrochemiluminescent (ECL) and chemiluminescent (CL) analytical methods based on various metal NCs have become research hotspots. To improve ECL and CL performances, many strategies are proposed, from metal core to ligand, from intermolecular electron transfer to intramolecular electron transfer. Combined with a variety of amplification technology, i.e., nanostructure-based enhancement and biological signal amplification, highly sensitive ECL and CL analytical methods are developed. We have summarized the research progresses since 2016. Also, we discuss the current challenges and perspectives on the development of this area.

Electronically Coupled Gold Nanoclusters Render Deep-Red Emission with High Quantum Yields

Electronic coupling can be used to tailor electronic states and optical properties of the luminophores. Therefore, electronically coupled systems would provide unique properties, which cannot be achieved by individual constituents. Here, electronically coupled gold nanoclusters (AuNCs) were prepared on the basis of organosilane grafting and a sol-gel-derived porous silica template. After prolonged drying, the formed AuNCs@silica composites exhibited red-shifted, line-width-narrowed, deep-red emission with high quantum yields (QYs) of ∼66% due to electronic-coupling-enhanced radiative rates and covalent-bonding-suppressed nonradiative relaxation. Meanwhile, the absorption maximum was slightly blue-shifted, leading to a large Stokes shift. All experimental findings revealed the formation of electronically coupled AuNC aggregates confined inside the nanopores and bonded to silica matrix. The mechanism is distinctly different from conventional aggregation-enhanced emission. Our work would provide great potential to engineer photophysical properties by controlling the packing modes.

Distance makes a difference in crystalline photoluminescence

Crystallization-induced photoluminescence weakening was recently revealed in ultrasmall metal nanoparticles. However, the fundamentals of the phenomenon are not understood yet. By obtaining conformational isomer crystals of gold nanoclusters, we investigate crystallization-induced photoluminescence weakening and reveal that the shortening of interparticle distance decreases photoluminescence, which is further supported by high-pressure photoluminescence experiments. To interpret this, we propose a distance-dependent non-radiative transfer model of excitation electrons and support it with additional theoretical and experimental results. This model can also explain both aggregation-induced quenching and aggregation-induced emission phenomena. This work improves our understanding of aggregated-state photoluminescence, contributes to the concept of conformational isomerism in nanoclusters, and demonstrates the utility of high pressure studies in nanochemistry.

Aggregation-induced phosphorescence sensitization in two heptanuclear and decanuclear gold-silver sandwich clusters

The strategy of aggregation-induced emission enhancement (AIEE) has been proven to be efficient in wide areas and has recently been adopted in the field of metal nanoclusters. However, the relationship between atomically precise clusters and AIEE is still unclear. Herein, we have successfully obtained two few-atom heterometallic gold-silver hepta-/decanuclear clusters, denoted Au6Ag and Au9Ag, and determined their structures by X-ray diffraction and mass spectrometry. The nature of the Au^I⋯Ag^I interactions thereof is demonstrated through energy decomposition analysis to be far-beyond typical closed-shell metal-metal interaction dominated by dispersion interaction. Furthermore, a positive correlation has been established between the particle size of the nanoaggregates and the photoluminescence quantum yield for Au6Ag, manifesting AIEE control upon varying the stoichiometric ratio of Au : Ag in atomically-precise clusters.

Ultrasmall Au nanoclusters for bioanalytical and biomedical applications: the undisclosed and neglected roles of ligands in determining the nanoclusters' catalytic activities

Significantly different from conventional Au nanoparticles, ultrasmall Au nanoclusters (NCs) consisting of several to about a hundred Au atoms with a size below 2 nm exhibit a strong quantum confinement effect, and possess an intriguing molecular-like highest occupied molecular orbital (HOMO)-lowest unoccupied molecular orbital (LUMO) transition, quantized charging, intrinsic chirality, and special fluorescence properties, as well as high catalytic activities. In virtue of their unique molecular-like electronic structure, remarkable physicochemical properties, mild preparation conditions and good biocompatibility, Au NCs have been having a profound impact on bioanalytical and biomedical applications, such as biosensing, biological imaging, cell markers, drug delivery, photodynamic/photothermal therapy, and biomedical toxicology. As an indispensable part of Au NCs, shell ligands not only stabilize and protect the structure of Au NCs, but also have an important influence on the structure and biocatalytic activities of Au NCs. Nevertheless, the effect of shell ligands on the biocatalytic activities of Au NCs has not been paid much attention or even ignored. In this Focus article, thus, the structure and biocatalytic activities of Au NCs are discussed from the perspective of the shell ligands. Particular emphasis is directed to the discussion and exploration of the undisclosed and neglected roles of shell ligands in the biocatalytic activities of Au NCs, which are of fundamental importance to the unraveling of charge transfer behaviors and biocatalytic processes of Au NCs. In addition, the future directions to explore the mechanism of shell ligands affecting the biocatalytic activities of Au NCs, such as surface ligand engineering of Au NCs, advanced surface/interface in situ characterization techniques, theoretical analysis, and the nanobiology of Au NCs, are also put forward.

Intratumoral generation of photothermal gold nanoparticles through a vectorized biomineralization of ionic gold

Various cancer cells have been demonstrated to have the capacity to form plasmonic gold nanoparticles when chloroauric acid is introduced to their cellular microenvironment. But their biomedical applications are limited, particularly considering the millimolar concentrations and longer incubation period of ionic gold. Here, we describe a simplistic method of intracellular biomineralization to produce plasmonic gold nanoparticles at micromolar concentrations within 30 min of application utilizing polyethylene glycol as delivery vector for ionic gold. We have characterized this process for intracellular gold nanoparticle formation, which progressively accumulates proteins as the ionic gold clusters migrate to the nucleus. This nano-vectorized application of ionic gold emphasizes its potential biomedical opportunities while reducing the quantity of ionic gold and required incubation time. To demonstrate its biomedical potential, we further induce in-situ biosynthesis of gold nanoparticles within MCF7 tumor mouse xenografts which is followed by its photothermal remediation.

High-sensitivity Detection of Cysteine and Glutathione Using Au Nanoclusters Based on Aggregation-induced Emission

Gold nanoclusters (AuNCs) stabilized by glutathione (GSH) have been synthesized using a simple one-pot method, which were used as a fluorescence-enhanced probe for the detection of cysteine (Cys) and GSH. The detection is based on the finding that the weak yellow fluorescence of the AuNCs, with excitation/emission maxima of 430/600 nm, can be enhanced by Cys and GSH via NCs aggregation. This method is selective for Cys and GSH. According to the fluorescence enhancement, the detection ranges of AuNCs for Cys and GSH are 2.49 µM ~ 0.80 mM and 1.99 µM ~ 0.44 mM, with the detection limit of 0.42 µM and 0.27 µM, respectively. In addition, the probe has good anti-interference performance over other common biomolecules. Importantly, the probe is successfully used for the determination of Cys in human serum samples, displaying the potential application of the probe in the detection of biological sulfhydryl molecules in actual samples.

Photoluminescent hydrophilic cyclodextrin-stabilized cysteine-protected copper nanoclusters for detecting lysozyme

Lysozyme (LYZ) sensors have attracted increased attention because rapid and sensitive detection of LYZ is highly desirable for various diseases associated with humans. In this research, we designed L-cysteine-protected ultra small photoluminescent (PL) copper nanoclusters (CuNCs) conjugated with β-cyclodextrin (β-CD) for rapid detection of LYZ in human serum samples at room temperature. The proposed β-CD-CuNCs exhibited excellent water solubility, ultrafine size, good dispersion, bright photoluminescence, and good photostability. The β-CD-CuNCs exhibit an excitation and emission maximum at 370 nm and 492 nm, respectively, with an absolute quantum yield (QY) of 54.6%. β-CD-CuNCs showed a fluorescence lifetime of 12.7 ns. The addition of LYZ would result in PL quenching from β-CD-CuNCs. The lowest detectable LYZ concentration was 50 nM for the naked eye and the limit of detection (LOD) and limit of quantification (LOQ) were 0.36 nM and 1.21 nM, respectively, by emission measurement observed in the LYZ concentration range from 30 to 100 nM. It is important to note that the PL β-CD-CuNC strategy possessed great selectivity toward LYZ relative to other biomolecules. The proposed nanosensor was efficiently applied to determine the LYZ level in human serum sample average recoveries from 96.15 to 104.05% and relative standard deviation (RSD) values lower than 3.0%. Moreover, the proposed sensing system showed many advantages, including high speed, high sensitivity, high selectivity, low cost, and simple preparation.

Atomically precise alloy nanoclusters: syntheses, structures, and properties

Metal nanoclusters fill the gap between discrete atoms and plasmonic nanoparticles, providing unique opportunities for investigating the quantum effects and precise structure-property correlations at the atomic level. As a versatile strategy, alloying can largely improve the physicochemical performances compared to the corresponding homo-metal nanoclusters, and thus benefit the applications of such nanomaterials. In this review, we highlight the achievements of atomically precise alloy nanoclusters, and summarize the alloying principles and fundamentals, including the synthetic methods, site-preferences for different heteroatoms in the templates, and alloying-induced structure and property changes. First, based on various Au or Ag nanocluster templates, heteroatom doping modes are presented. The templates with electronic shell-closing configurations tend to maintain their structures during doping, while the others may undergo transformation and give rise to alloy nanoclusters with new structures. Second, alloy nanoclusters of specific magic sizes are reviewed. The arrangement of different atoms is related to the symmetry of the structures; that is, different atoms are symmetrically located in the nanoclusters of smaller sizes, and evolve into shell-by-shell structures at larger sizes. Then, we elaborate on the alloying effects in terms of optical, electrochemical, electroluminescent, magnetic and chiral properties, as well as the stability and reactivity via comparisons between the doped nanoclusters and their homo-metal counterparts. For example, central heteroatom-induced photoluminescence enhancement is emphasized. The applications of alloy nanoclusters in catalysis, chemical sensing, bio-labeling, and other fields are further discussed. Finally, we provide perspectives on existing issues and future efforts. Overall, this review provides a comprehensive synthetic toolbox and controllable doping modes so as to achieve more alloy nanoclusters with customized compositions, structures, and properties for applications. This review is based on publications available up to February 2020.

Isomerization-induced enhancement of luminescence in Au28(SR)20 nanoclusters

Understanding the origin and structural basis of the photoluminescence (PL) phenomenon in thiolate-protected metal nanoclusters is of paramount importance for both fundamental science and practical applications. It remains a major challenge to correlate the PL properties with the atomic-level structure due to the complex interplay of the metal core (i.e. the inner kernel) and the exterior shell (i.e. surface Au(i)-thiolate staple motifs). Decoupling these two intertwined structural factors is critical in order to understand the PL origin. Herein, we utilize two Au₂₈(SR)₂₀ nanoclusters with different –R groups, which possess the same core but different shell structures and thus provide an ideal system for the PL study. We discover that the Au₂₈(CHT)₂₀ (CHT: cyclohexanethiolate) nanocluster exhibits a more than 15-fold higher PL quantum yield than the Au₂₈(TBBT)₂₀ nanocluster (TBBT: p-tert-butylbenzenethiolate). Such an enhancement is found to originate from the different structural arrangement of the staple motifs in the shell, which modifies the electron relaxation dynamics in the inner core to different extents for the two nanoclusters. The emergence of a long PL lifetime component in the more emissive Au₂₈(CHT)₂₀ nanocluster reveals that its PL is enhanced by suppressing the nonradiative pathway. The presence of long, interlocked staple motifs is further identified as a key structural parameter that favors the luminescence. Overall, this work offers structural insights into the PL origin in Au₂₈(SR)₂₀ nanoclusters and provides some guidelines for designing luminescent metal nanoclusters for sensing and optoelectronic applications.

Two Au₂₈(SR)₂₀ nanoclusters with an identical core but different shells exhibit a ∼15-fold difference in photoluminescence.

Development of fluorescence oligonucleotide probes based on cytosine- and guanine-rich sequences

The properties of cytosine- and guanine-rich oligonucleotides contributed to employing them as sensing elements in various biosensors. In this paper, we report our current development of fluorescence oligonucleotide probes based on i-motif or G-quadruplex forming oligonucleotides for cellular measurements or bioimaging applications. Additionally, we also focus on the spectral properties of the new fluorescent silver nanoclusters based system (ChONC12-AgNCs) that is able to anchor at the Langmuir monolayer interface, which is mimicking the surface of living cells membrane.

Delivery of drugs, proteins, and nucleic acids using inorganic nanoparticles

Inorganic nanoparticles provide multipurpose platforms for a broad range of delivery applications. Intrinsic nanoscopic properties provide access to unique magnetic and optical properties. Equally importantly, the structural and functional diversity of gold, silica, iron oxide, and lanthanide-based nanocarriers provide unrivalled control of nanostructural properties for effective transport of therapeutic cargos, overcoming biobarriers on the cellular and organismal level. Taken together, inorganic nanoparticles provide a key addition to the arsenal of delivery vectors for fighting disease and improving human health.

Highly transparent and luminescent gel glass based on reabsorption-free gold nanoclusters

Luminescent and transparent composites formed by embedding luminophores in a solid matrix are essential components for several photonic applications, such as luminescent solar concentrators (LSCs) and luminescent down-shifting/conversion layers. For these applications, the optical losses, including reabsorption and scattering need to be minimized, while the photoluminescence (PL) emission must be stable against outdoor environments. Here, highly transparent and luminescent aluminosilicate glass doped with surface-engineered gold nanoclusters (AuNCs) was prepared without involving toxic elements and hazardous solvents. Such an AuNC@glass composite with a high loading (∼14 wt%) exhibits a unique absorption profile; near-unity absorptance in the absorption range but near-zero reabsorption in the emission region, and thus generates bright PL emission with negligible reabsorption losses. Meanwhile, the PL quantum yield was enhanced (from ∼1% to ∼14%) without sacrificing the Stokes shift, while still maintaining high optical transparency. In addition, they have high stability due to the effective protection of rigid inorganic matrices, and thus would be eco-friendly candidates for further preparation of efficient and reabsorption-free LSCs.

Highly fluorescent few atoms silver nanoclusters with strong photocatalytic activity synthesized by ultrashort light pulses

While there are conventional chemical synthesis methods to generate metal nanoclusters (NCs), many of them are adversely affected by the unavoidable contamination of the nanoproduct solution, resulting in aggregation, background noise in analytical chemistry, toxicity, and deactivation of the catalyst. In this work, physical method of ultrafast laser ablation as a "green" synthesis approach together with mechanical centrifugation to obtain silver NCs, simplifying widely the chemical synthesis requirements, is proposed. Remarkably, compared with conventional methods for synthesizing Ag NCs, this new approach starts with a colloid that contains nanosized particles as well as smaller species, managing to obtain colloids with few atoms NCs by centrifugation. Those colloids were analyzed by fluorescence spectroscopy observing UV bands corresponding with HOMO-LUMO cluster transitions. Besides, independent HRTEM measurements were made confirming the presence of few atoms Ag NCs, as well as small NPs in different formation stages. Equally important, photocatalytic efficiency of the obtained NCs was studied through degradation of Methylene Blue (MB) when it was mixed with as-prepared or highly centrifuged colloid, showing an enhanced photocatalytic efficiency of 79% as compared to 57% for pure MB after 180 min of illumination. Consequently, this work contributes to establishing a simple approach to synthesize highly fluorescent and photocatalytic NCs.

Progressive aggregation-induced emission strategy for imaging of aluminum ions in cellular microenvironment

A progressive aggregation-induced emission (AIE) strategy is established based on two diverse stimulus-responsive patterns of copper nanoclusters (CuNCs) for imaging of aluminum ions (Al³⁺) in cellular microenvironment. The non-emissive CuNCs were facilely synthesized with l-glutathione (GSH) as both stabilizing agent and reducing agent, and demonstrated the excellent AIE characteristics in the ethanol/water mixture. Moreover, the dispersed CuNCs can be aggregated to give the AIE behavior in aqueous solutions by reducing the pH value, and could be further aggregated with 94-fold reinforce by introducing Al³⁺ ascribe to the strong coordination ability between Al³⁺ and the functional groups of GSH, demonstrating the progressive AIE process. Under endocytosis, the progressive AIE strategy can be employed to distinguish the Al³⁺ in the locations of lysosome against other organelles due to the acidic microenvironment of lysosome. The progressive AIE advantages of CuNCs provide a new concept for signal transduction, and have the promising applications in decoding the functions of intracellular biomolecules.

Induced fluorescent enhancement of protein-directed synthesized gold nanoclusters for selective and sensitive detection of flame retardants

Organophosphate flame retardants (OPFRs), typical toxic and hazardous pollutants, are called for new detection approaches to avoid laborious synthetic procedures and large and expensive instruments. Hence, a novel fluorescent probe was constructed for quantitative detection of OPFRs via heightening the fluorescence of acetylcholinesterase synthesized gold nanoclusters (AChE-AuNCs). The as-prepared AChE-AuNCs exhibited high fluorescence emission at about 398 nm with the average particle size of about 1.60 nm. When the AChE-AuNCs was applied to the proposed fluorescent detection, excellent sensitivity with wide linear range (50-1000 ng L^-1) and low detection limit (30 ng L^-1) for TClPP with the response time less than 1 h were achieved. The fluorescent probe could be extended to detect other three types of OPFRs (TEP, TPHP, and TBOEP) and the target pollutants could be detectable in the presence of halogenated flame retardants. The mechanism might be mainly contributed by the interaction between OPFRs and AChE-AuNCs restricting internal vibration consumption of their capping ligands. The proposed detection approach could be easily operated and was not involved with other intermediate products. Therefore, AChE-AuNCs could be a promising fluorescent probe for rapid, selective and sensitive detection of OPFRs and even in the practical application.

Luminescent gold nanoclusters for bioimaging applications

Luminescent nanomaterials have emerged as attractive candidates for sensing, catalysis and bioimaging applications in recent years. For practical use in bioimaging, nanomaterials with high photoluminescence, quantum yield, photostability and large Stokes shifts are needed. While offering high photoluminescence and quantum yield, semiconductor quantum dots suffer from toxicity and are susceptible to oxidation. In this context, atomically precise gold nanoclusters protected by thiol monolayers have emerged as a new class of luminescent nanomaterials. Low toxicity, bioavailability, photostability as well as tunable size, composition, and optoelectronic properties make them suitable for bioimaging and biosensing applications. In this review, an overview of the sensing of pathogens, and of in vitro and in vivo bioimaging using luminescent gold nanoclusters along with the limitations with selected examples are discussed.

Dual-emission carbon dots-stabilized copper nanoclusters for ratiometric and visual detection of Cr2O72- ions and Cd2+ ions

The pollution of heavy metal increases greatly accompanying by the development of industries. So, it is very important to build up a quick and reliable technique for detection of heavy metal ions. In this work, we developed a simple and convenient method for ratiometric and visual detection of Cr₂O₇^2- ions and Cd²⁺ ions. We utilized glutathione as raw material to prepare cyan-emitting carbon dots (GSH@CDs). The GSH@CDs were further used as the template to prepare carbon dots-stabilized copper nanoclusters (GSH@CDs-Cu NCs) that displayed two well-separated emission peaks respectively at 450 nm and 750 nm. The GSH@CDs-Cu NCs can be applied for the ratiometric and visual detection of Cr₂O₇^2- and Cd²⁺ ions based on the fluorescence quenching or enhancement of GSH@CDs-Cu NCs at 750 nm. A linear range of 2-40 μmol L^-1 with a detection limit of 0.9 μmol L^-1 for Cr₂O₇^2- ions, and a linear range of 0-20 μmol L^-1 with a detection limit of 0.6 μmol L^-1 for Cd²⁺ ions were achieved based on this method. The fluorescent test strips for Cr₂O₇^2- ions were successfully prepared based on GSH@CDs-Cu NCs. Moreover, the GSH@CDs-Cu NCs were successfully applied to determine Cr₂O₇^2- and Cd²⁺ ions in real samples with promising results.

RNase A activity analysis and imaging using label-free DNA-templated silver nanoclusters

A label-free, ultra-sensitive and turn-on method for detecting RNase A has been developed using enhanced DNA-templated silver nanoclusters (DNA-AgNCs) as the fluorescence probe. In this system, an RNA strand, which can perfectly hybridize with DNA template of nanocluster synthesis, was applied to lock the fluorescent signal of DNA-AgNCs by forming an RNA/DNA duplex. Meanwhile, the hybridized RNA/DNA duplex was used as the substrate of RNase A. The fluorescence signal of AgNCs was restored due to the degradation of RNA by RNase A. From the fluorescence signal change of this system caused by RNase A, it was found that the fluorescence signal showed a positive linear relation with RNase A concentration in the range from 0.2 pg/μL to 10 pg/μL with a detection limit of 0.098 pg/μL. Except for potential inhibitor screening and the kinetic study of this enzyme, this strategy was further used for monitoring dynamic change of RNase A in living cells successfully. In summary, the simple and sensitive method for RNase A assay can be hopefully used for drug screening in vitro and in vivo.

Supramolecular materials based on AIE luminogens (AIEgens): construction and applications

The emergence of aggregation-induced emission luminogens (AIEgens) has significantly stimulated the development of luminescent supramolecular materials because their strong emissions in the aggregated state have resolved the notorious obstacle of the aggregation-caused quenching (ACQ) effect, thereby enabling AIEgen-based supramolecular materials to have a promising prospect in the fields of luminescent materials, sensors, bioimaging, drug delivery, and theranostics. Moreover, in contrast to conventional fluorescent molecules, the configuration of AIEgens is highly twisted in space. Investigating AIEgens and the corresponding supramolecular materials provides fundamental insights into the self-assembly of nonplanar molecules, drastically expands the building blocks of supramolecular materials, and pushes forward the frontiers of supramolecular chemistry. In this review, we will summarize the basic concepts, seminal studies, recent trends, and perspectives in the construction and applications of AIEgen-based supramolecular materials with the hope to inspire more interest and additional ideas from researchers and further advance the development of supramolecular chemistry.

Giant Emission Enhancement of Solid-State Gold Nanoclusters by Surface Engineering

Ligand-induced surface restructuring with heteroatomic doping is used to precisely modify the surface of a prototypical [Au₂₅ (SR¹ )₁₈ ]^- cluster (1) while maintaining its icosahedral Au₁₃ core for the synthesis of a new bimetallic [Au₁₉ Cd₃ (SR² )₁₈ ]^- cluster (2). Single-crystal X-ray diffraction studies reveal that six bidentate Au₂ (SR¹ )₃ motifs (L2) attached to the Au₁₃ core of 1 were replaced by three quadridentate Au₂ Cd(SR² )₆ motifs (L4) to create a bimetallic cluster 2. Experimental and theoretical results demonstrate a stronger electronic interaction between the surface motifs (Au₂ Cd(SR² )₆ ) and the Au₁₃ core, attributed to a more compact cluster structure and a larger energy gap of 2 compared to that of 1. These factors dramatically enhance the photoluminescence quantum efficiency and lifetime of crystal of the cluster 2. This work provides a new route for the design of a wide range of bimetallic/alloy metal nanoclusters with superior optoelectronic properties and functionality.

Amplified luminescence quenching effect upon binding of nitrogen doped carbon nanodots to transition metal ions

There is a significant drive to identify a unified emission mechanism hidden behind carbon nanodots (CDs) to attain reliable control over their photoluminescence properties. This issue is addressed here by investigating the fluorescence response of citric acid and urea-based nitrogen doped carbon nanodots (NCDs) towards transition metal ions in solutions of different polarities/viscosities/hydrogen bonding strengths. The photoluminescence from NCDs upon excitation at 400 nm is quenched by metal ions such as chromium(vi), ruthenium(iii) and iron(iii) in two different polar solvents, protic water and aprotic dimethylsulphoxide (DMSO). This amplified luminescence quenching in polar solutions showed significant static quenching contributions. The quenching phenomenon highly depends on the excitation wavelength and solvent environment. The fluorescence quenching sequence reveals that pyridinic nitrogen-bases have a dominant influence on J-like emissive aggregates of NCDs. Similarly, oxygen-containing functional groups play a significant role in constructing H-aggregates of NCDs. The most intense emission is contributed by the J-like assembly of H-aggregates.

A novel fluorescence probe of Plasmodium vivax lactate dehydrogenase based on adenosine monophosphate protected bimetallic nanoclusters

Specific detection of Plasmodium vivax lactate dehydrogenase (PvLDH), an important biomarker of malaria, remains a significant challenge. Herein, adenosine monophosphate protected gold-silver bimetallic nanoclusters, Au-AgNCs@AMP were used as a specific and sensitive fluorescence probe to detect PvLDH. After optimizing, a linear response was shown over a wide concentration range (10-100 nM) and an extremely low limit of detection (LOD) at 0.10 nM (3.7 ng mL^-1) was achieved finally. Albeit the method was able to detect PvLDH sensitively, it could not discriminate different types of LDHs. Consequently, Al³⁺ was employed as an "assistant agent", which induced an assay capacity to discriminate PvLDH from other LDHs. The bimetallic nanoclusters inhibited the activity of PvLDH, suggesting it bound near the active site of PvLDH with high affinity. Zeta potential and UV-vis absorption experiments showed that electrostatic interaction was the main driving force for the interaction between the nanoclusters and PvLDH. Through chemical modification it indicated free thiol groups in PvLDH played an implant role in the interaction. Overall, the fluorescence enhancement and blue-shift were attributed to assembly-induced emission enhancement (AIEE) and hydrophobic transfer. The present study provides a simple, robust, and easy-to-perform approach to detect PvLDH with high sensitivity and selectivity, with significant potential for malaria diagnosis in the developing world.

Origin of the Photoluminescence of Metal Nanoclusters: From Metal-Centered Emission to Ligand-Centered Emission

Recently, metal nanoclusters (MNCs) emerged as a new class of luminescent materials and have attracted tremendous interest in the area of luminescence-related applications due to their excellent luminous properties (good photostability, large Stokes shift) and inherent good biocompatibility. However, the origin of photoluminescence (PL) of MNCs is still not fully understood, which has limited their practical application. In this mini-review, focusing on the origin of the photoemission emission of MNCs, we simply review the evolution of luminescent mechanism models of MNCs, from the pure metal-centered quantum confinement mechanics to ligand-centered p band intermediate state (PBIS) model via a transitional ligand-to-metal charge transfer (LMCT or LMMCT) mechanism as a compromise model.

Ultrastable atomically precise chiral silver clusters with more than 95% quantum efficiency

Monolayer-protected atomically precise silver clusters display low photoluminescence (PL) quantum yield (QY) and susceptibility under ambient conditions, and their chiroptical activities also remain underdeveloped. Here, we report enantiomers of an octahedral Ag₆ cluster prepared via one-step synthesis using designed chiral ligands at ambient temperature. These clusters exhibit a highest PLQY (300 K) >95.0% and retain their structural integrity and emission up to 150°C in air. Atomically precise structural determination combined with photophysical and computational analysis revealed that thermally activated delayed fluorescence, observed in silver cluster systems, is responsible for the high PLQY, which combines chirality in excited states to generate strong circularly polarized luminescence. These unprecedented findings open up horizons of investigation of monolayer-protected silver clusters for future luminescence applications.

Oxometalate and phosphine ligand co-protected silver nanoclusters: Ag28(dppb)6(MO4)4 and Ag32(dppb)12(MO4)4(NO3)4

Thiols, alkynyls and phosphines are the most widely used organic ligands to attain atomically precise metal nanoclusters, while oxometalates as inorganic ligands have almost been neglected in this field. Here, we used oxometalates (e.g., MoO42- and WO42-) as protecting ligands along with phosphines, such as 1,4-bis(diphenylphosphino)butane (dppb), to design and synthesize a new class of silver nanoclusters including Ag28(dppb)6(MoO4)4, Ag28(dppb)6(WO4)4 and Ag32(dppb)12(MoO4)4(NO3)4. Each cluster consists of a two-shell Ag4@Ag24 core protected by 4 oxometalates. These clusters exhibit similar optical absorption and photoluminescence properties that are not dependent on surface ligands. Furthermore, the electronic structure analysis shows that the clusters are 20-electron "superatoms". This work demonstrates that oxometalates can play a key role in the formation of silver nanoclusters, and the effect of oxometalates should be considered in the design and synthesis of metal nanoclusters.

The synthesis of switch-off fluorescent water-stable copper nanocluster Hg2+ sensors via a simple one-pot approach by an in situ metal reduction strategy in the presence of a thiolated polymer ligand template

The fabrication of stable fluorescent copper nanoclusters (CuNCs) in aqueous media is still challenging, despite the low price and potential biomedical applications. Herein, we report a facile and efficient strategy for assembling CuNCs using multifunctional thiolated copolymers with pH and thermoresponsive features. The new nanohybrids are formed via a simple one-pot approach through the reduction of a copper salt with hydrazine in the presence of a multithiolated polymer, which provides a template during nanocluster assembly and further efficient protection against oxidation and aggregation. Furthermore, the thermo- and pH-responsive properties of the pristine copolymers endow the nanohybrids with these stimuli-responsive features. The thiol content and the macromolecular size of the polymer ligands exert strong influences on the final photophysical properties of these new hybrid luminescent nanoclusters. The existence of stable bright greenish-yellow emission in water over long periods of time, the high photostability under UV irradiation and the strong oxidation resistance toward hydrogen peroxide of the hybrid CuNCs suggest that they have great promise for nanomedicine, bioassay and nanosensor use. Furthermore, the polymeric CuNCs obtained have been successfully tested as optical switch-off sensors for the sensitive and highly selective detection of Hg2+ in the presence of other metal ions in liquid and solid states. Finally, we demonstrate the practical application of the new hybrid to Hg2+ detection in human urine.

Turn-on fluorescence in a pyridine-decorated tetraphenylethylene: the cooperative effect of coordination-driven rigidification and silver ion induced aggregation

A newly designed TPE ligand displayed a large fluorescence enhancement in the presence of silver ions in a dilute solution, leading to tunable fluorescence properties by simply mixing AIE and ACQ molecules.

Gold nanoclusters for biomedical applications: toward in vivo studies

In parallel with the rapidly growing and widespread use of nanomedicine in the clinic, we are also witnessing the development of so-called theranostic agents that combine diagnostic and therapeutic properties.