Development of MOF-Derived Carbon-Based Nanomaterials for Efficient Catalysis

Guggulsterone Mediated JAK/STAT and PPAR-Gamma Modulation Prevents Neurobehavioral and Neurochemical Abnormalities in Propionic Acid-Induced Experimental Model of Autism

Autism spectrum disorder is a neurodevelopmental disorder marked by repetitive behaviour, challenges in verbal and non-verbal communication, poor socio-emotional health, and cognitive impairment. An increased level of signal transducer and activator of transcription 3 (STAT3) and a decreased level of peroxisome proliferator-activated receptor (PPAR) gamma have been linked to autism pathogenesis. Guggulsterone (GST) has a neuroprotective effect on autistic conditions by modulating these signalling pathways. Consequently, the primary objective of this study was to examine potential neuroprotective properties of GST by modulating JAK/STAT and PPAR-gamma levels in intracerebroventricular propionic acid (ICV PPA) induced experimental model of autism in adult rats. In this study, the first 11 days of ICV-PPA injections in rats resulted in autism-like behavioural, neurochemical, morphological, and histopathological changes. The above modifications were also observed in various biological samples, including brain homogenate, CSF, and blood plasma. GST was also observed to improve autism-like behavioural impairments in autistic rats treated with PPA, including locomotion, neuromuscular coordination, depression-like behaviour, spatial memory, cognition, and body weight. Prolonged GST treatment also restored neurochemical deficits in a dose-dependent manner. Chronic PPA administration increased STAT3 and decreased PPAR gamma in autistic rat brain, CSF, and blood plasma samples, which were reversed by GST. GST also restored the gross and histopathological alterations in PPA-treated rat brains. Our results indicate the neuroprotective effects of GST in preventing autism-related behavioural and neurochemical alterations.

Tailor the crystal planes of MIL-101(Fe) derivatives to enhance the activity of SCR reaction at medium and low temperature

Mainly exposed crystal facets and controllable morphology play a key role in the final performance of the preparation of specific nanomaterials. In the present study, a metal-organic framework pyrolysis method without adding solvent modifiers was developed. By adding CO in the calcination atmosphere to change atmosphere ratio, Fe₃O₄ nanostructures are exposed with different crystal planes and evaluated their performance in NH₃-SCR reaction. This study proves that SCR catalytic activity of Fe₃O₄ nanocrystals is dependent on morphology and crystal facet. Compared with materials exposed (100), catalysts with more (111) show stronger deNO_x performance. The preferential exposure of Fe₃O₄ (111) crystal facets increases the concentration of adsorbed oxygen on the catalyst, showing higher surface acidity, and enhances the interaction among NO, O₂ and catalyst, which is conducive to SCR reaction. This is supported by DFT calculations. The results present a great application prospect in preparing nanomaterials with specific crystal structures to effectively treat pollutants.

Insight into the Photocatalytic Activity of Cobalt-Based Metal–Organic Frameworks and Their Composites

Nowadays, materials with great potential for environmental protection are being sought. Metal–organic frameworks, in particular those with cobalt species as active sites, have drawn considerable interest due to their excellent properties. This review focuses on describing cobalt-based MOFs in the context of light-triggered processes, including dye degradation, water oxidation and splitting, carbon dioxide reduction, in addition to the oxidation of organic compounds. With the use of Co-based MOFs (e.g., ZIF-67, Co-MOF-74) as photocatalysts in these reactions, even over 90% degradation efficiencies of various dyes (e.g., methylene blue) can be achieved. Co-based MOFs also show high TOF/TON values in water splitting processes and CO2-to-CO conversion. Additionally, the majority of alcohols may be converted to aldehydes with efficiencies exceeding 90% and high selectivity. Since Co-based MOFs are effective photocatalysts, they can be applied in the elimination of toxic contaminants that endanger the environment.

Micro/macrostructure and multicomponent design of catalysts by MOF-derived strategy: Opportunities for the application of nanomaterials-based advanced oxidation processes in wastewater treatment

Advanced oxidation processes (AOPs) have demonstrated an effective wastewater treatment method. But the application of AOPs using nanomaterials as catalysts is challenged with a series of problems, including limited mass transfer, surface fouling, poor stability, and difficult recycling. Recently, metal-organic frameworks (MOFs) with high tunability and ultrahigh porosity are emerging as excellent precursors for the delicate design of the structure/composition of catalysts and many MOF-derived catalysts with distinct physicochemical characteristics have shown optimized performance in various AOPs. Herein, to elucidate the structure-composition-performance relationship, a review on the performance optimization of MOF-derived catalysts to overcome the existing problems in AOPs by micro/macrostructure and multicomponent design is given. Impressively, MOF-derived strategy for the design of catalyst materials from the aspects of microstructure, macrostructure, and multicomponent (polymetallic, heteroatom doping, M/C hybrids, etc.) is firstly presented. Moreover, important advances of MOF-derived catalysts in the application of various AOPs (Fenton, persulfate-based AOPs, photocatalysis, electrochemical processes, hybrid AOPs) are summarized. The relationship between the unique micro/macrostructure and/or multicomponent features and performance optimization in mass transfer, catalytic efficiency, stability, and recyclability is clarified. Furthermore, the challenges and future work directions for the practical application of MOF-derived catalysts in AOPs for wastewater treatment are provided.

Carbon Materials as Positive Electrodes in Bromine-Based Flow Batteries

Bromine based redox flow batteries (RFBs) can provide sustainable energy storage due to the abundance of bromine. Such devices pair Br₂ /Br^- at the positive electrode with complementary redox couples at the negative electrode. Due to the highly corrosive nature of bromine, electrode materials need to be corrosion resistant and durable. The positive electrode requires good electrochemical activity and reversibility for the Br₂ /Br^- couple. Carbon materials enjoy the advantages of low cost, excellent electrical conductivity, chemical resistance, wide operational potential ranges, modifiable surface properties, and high surface area. Here carbon based materials for bromine electrodes are reviewed, with a focus on application in zinc-bromine, hydrogen-bromine, and polysulphide-bromine RFB systems, aiming to provide an overview of carbon materials to be used for design and development of bromine electrodes with improved performance. Aspects deserving further R&D are highlighted.

Recent Advances in Nanoscale Based Electrocatalysts for Metal-Air Battery, Fuel Cell and Water-Splitting Applications: An Overview

Metal-air batteries and fuel cells are considered the most promising highly efficient energy storage systems because they possess long life cycles, high carbon monoxide (CO) tolerance, and low fuel crossover ability. The use of energy storage technology in the transport segment holds great promise for producing green and clean energy with lesser greenhouse gas (GHG) emissions. In recent years, nanoscale based electrocatalysts have shown remarkable electrocatalytic performance towards the construction of sustainable energy-related devices/applications, including fuel cells, metal-air battery and water-splitting processes. This review summarises the recent advancement in the development of nanoscale-based electrocatalysts and their energy-related electrocatalytic applications. Further, we focus on different synthetic approaches employed to fabricate the nanomaterial catalysts and also their size, shape and morphological related electrocatalytic performances. Following this, we discuss the catalytic reaction mechanism of the electrochemical energy generation process, which provides close insight to develop a more efficient catalyst. Moreover, we outline the future perspectives and challenges pertaining to the development of highly efficient nanoscale-based electrocatalysts for green energy storage technology.

Hydrogenation of furfural to furfuryl alcohol over MOF-derived Fe/Cu@C and Fe3O4/Cu@C catalysts

With Cu-MOF-loaded Fe(NO3)3 as the precursor (Fe(NO3)3/Cu-MOF), Fe/Cu@C and Fe3O4/Cu@C catalysts were prepared from heating under the H2 and N2 atmosphere, respectively. When Fe(NO3)3/Cu-MOF was heated under different atmospheres, Cu-MOF...

Synergy between homogeneous and heterogeneous catalysis

Catalysis plays a decisive role in the advancement of sustainable processes in chemical, pharmaceutical, and agrochemical industries as well as petrochemical, material, and energy technologies. Notably, more than 80% of...

ZIF-Derived Metal/N-Doped Porous Carbon Nanocomposites: Efficient Catalysts for Organic Transformations

Recently, zeolitic imidazolate framework (ZIF)-derived metal/N-doped porous carbon nanocomposites (M@NCs) have emerged as a class of appealing heterogeneous catalysts applied in organic synthesis, and the striking features mainly involve low-cost...

Cu/Co/CoS2 embedded in S,N doped carbon as highly-efficient oxygen reduction and evolution electrocatalyst for rechargeable zinc-air batteries

In order to improve the retarded oxygen reduction and evolution reaction (ORR/OER) in rechargeable metal-air cells in electrochemical energy conversion systems, constructing multiphase nanostructured catalysts is an alternative strategy, where...

Cobalt nanoparticles supported on microporous nitrogen-doped carbon for efficient catalytic transfer hydrogenation reaction between nitroarenes and N-heterocycles

Catalytic transfer hydrogenation reaction between nitroarenes and saturated N-heterocycles to simultaneously synthesize value-added anilines and unsaturated N-heterocycles is attractive due to its low-cost, atomic economic, and environmental-friendly properties. Herein, we...

Unraveling High Alkene Selectivity at Full Conversion in Alkyne Hydrogenation over Ni under Continuous Flow Conditions

Selective hydrogenation of alkynes into alkenes in continuous flow conditions over non-precious metal catalysts is an attractive prospect for the chemical industry, especially for the petrochemical and polymer industry. Achieving...

Reversible synthesis of structured MOF-to-metal oxide nanorods

MIL-53(Al) forms uniform, 1D structures when produced from insoluble metal sources. Pyrolysis of these structures forms new alumina-based nanorods that extend up to 5 μm in one dimension. No external template or structure–direction is required.

CoP nanorods anchored on Ni2P-NiCoP nanosheets with abundant heterogeneous interfaces boosting the electrocatalytic oxidation of 5-hydroxymethyl-furfural

CoP nanorods anchored on Ni2P-NiCoP nanosheets have been fabricated. The heterogeneous interfaces can regulate the d-band centers of Co and Ni to approach the Fermi level, thus boosting the electrocatalytic oxidation of HMF.

N-doped porous carbons derived from Zn-porphyrin-MOF

N-doped porous metal–organic framework (MOF)-derived carbons (MDCs) were directly synthesized from a new Zn-DpyDtolP-MOF (ZnDpyDtolP·1/2DMF, H₂DpyDtolP = 5,15-di(4-pyridyl)-10,20-di(4-methylphenyl)porphyrin) containing a 3D hexagonal network through a self-templated carbonization method. KOH-activated MDC derivatives denoted as MDC-700-nKOH were also prepared with different weight ratios of KOH activator to MDC (MDC : KOH = 1 : n, where n = 1, 2). Compared to bare MDC, MDC-700-nKOH showed effective improvements of both gas sorption and electrochemical capacitive properties. More developed microporosity by KOH activation might induce great enhancement of high operating capacitive performances. The N-doped MDC-700-2KOH had high maximum gravimetric specific capacitance (555.6 F g⁻¹) and specific energy (40.4 W h kg⁻¹) at 0.1 A g⁻¹ in 1 M H₂SO₄. Even at a high current density of 190 A g⁻¹ in 6 M KOH, it exhibited high capacitive performance with a large specific power of 80 423 W kg⁻¹. MDC-700-nKOH electrodes also showed good recycling properties of electrochemical capacitance up to 30 000 cycles.

The porphyrin-based Zn-MOF is directly carbonized and activated by KOH for the generation of N-doped porous carbons acting as high performance supercapacitor electrode materials.

CoZn-ZIF-derived carbon-supported Cu catalyst for methanol oxidative carbonylation to dimethyl carbonate

Carbon materials derived from CoZn-ZIFs were used to load Cu catalysts and were applied for DMC synthesis, and the effects of the graphitization degree and the (N1 + N3)/N2 ratio were studied.

Reusable Co-nanoparticles for general and selective N-alkylation of amines and ammonia with alcohols

A general cobalt-catalyzed N-alkylation of amines with alcohols by borrowing hydrogen methodology to prepare different kinds of amines is reported. The optimal catalyst for this transformation is prepared by pyrolysis of a specific templated material, which is generated in situ by mixing cobalt salts, nitrogen ligands and colloidal silica, and subsequent removal of silica. Applying this novel Co-nanoparticle-based material, >100 primary, secondary, and tertiary amines including N-methylamines and selected drug molecules were conveniently prepared starting from inexpensive and easily accessible alcohols and amines or ammonia.

Watching Microwave-Induced Microscopic Hot Spots via the Thermosensitive Fluorescence of Europium/Terbium Mixed-Metal Organic Complexes

The hypothesis of microscopic hot spots is widely used to explain the unique microwave (MW) effect in materials science and chemical engineering, but it has not yet been directly measured. Herein we use Eu/Tb mixed-metal organic complexes as nano thermometers to probe the intrinsic temperature of MW-absorbing particles in MW fields based on the thermosensitive fluorescent spectra. According to the measurements of the temperature gradient at the solid/liquid interphase, we derive an MW-irradiated energy transfer model to predict the extent of microscopic hot spots. The fluorescence results agree with the model predictions that the MW-induced temperature gradient can be enlarged by increasing MW intensity, as well as the dielectric loss and size of particles. Conversely, the increase in the thermal conductivity and the dielectric loss of the liquid lowers the temperature gradient. This study enables control of MW-assisted synthesis and MW-responsive techniques.

MOF Structure Engineering to Synthesize CoNC Catalyst with Richer Accessible Active Sites for Enhanced Oxygen Reduction

Single-atom cobalt-based CoNC are promising low-cost electrocatalysts for oxygen reduction reaction (ORR). However, further increasing the single cobalt-based active sites and the ORR activity remain a major challenge. Herein, an acetate (OAc) assisted metal-organic framework (MOF) structure-engineering strategy is developed to synthesize hierarchical accordion-like MOF with higher loading amount and better spatial isolation of Co and much higher yield when compared with widely reported polyhedron MOF. After pyrolysis, the accordion-structured CoNC (CoNC (A)) is loaded with denser CoN₄ active sites (Co: 2.88 wt%), approximately twice that of Co in the CoNC reported. The presence of OAc in MOF also induces the generation of big pores (5-50 nm) for improving the accessibility of active sites and mass transfer during catalytic reactions. Consequently, the CoNC (A) catalyst shows an admirable ORR activity with a E_1/2 of 0.89 V (40 mV better than Pt/C) in alkaline electrolytes, outstanding durability, and absolute tolerance to methanol in both alkaline and acidic media. The CoNC-based Zn-air battery exhibits a high specific capacity (976 mAh g^-1 _Zn ), power density (158 mW cm^-2 ), rate capability, and long-term stability. This work demonstrates a reliable approach to construct single atom doped carbon catalysts with denser accessible active sites through MOF structure engineering.

Nanostructured Carbon Electrocatalysts for Energy Conversions

The growing energy demand worldwide has led to increased use of fossil fuels. This, in turn, is making fossil fuels dwindle faster and cause more negative environmental impacts. Thus, alternative, environmentally friendly energy sources such as fuel cells and electrolyzers are being developed. While significant progress has already been made in this area, such energy systems are still hard to scale up because of their noble metal catalysts. In this concept paper, first, various scalable nanocarbon-based electrocatalysts that are being synthesized for energy conversions in these energy systems are introduced. Next, notable heteroatom-doping and nanostructuring strategies that are applied to produce different nanostructured carbon materials with high electrocatalytic activities for energy conversions are discussed. The concepts used to develop such materials with different structures and large density of dopant-based catalytic functional groups in a sustainable way, and the challenges therein, are emphasized in the discussions. The discussions also include the importance of various analytical, theoretical, and computational methods to probe the relationships between the compositions, structures, dopants, and active catalytic sites in such materials. These studies, coupled with experimental studies, can further guide innovative synthetic routes to efficient nanostructured carbon electrocatalysts for practical, large-scale energy conversion applications.

Functionalized Carbon Materials in Syngas Conversion

Functionalized carbon materials are widely used in heterogeneous catalysis due to their unique properties such as adjustable surface properties, excellent thermal conductivity, high surface areas, tunable porosity, and moderate interactions with guest metals. The transformation of syngas into hydrocarbons (known as the Fischer-Tropsch synthesis) or oxygenates is an exothermic reaction and is typically catalyzed by transition metals dispersed on functionalized supports. Various carbon materials have been employed in syngas conversions not only for improving the performance or decreasing the dosage of expensive active metals but also for building model catalysts for fundamental research. This article provides a critical review on recent advances in the utilization of carbon materials, in particular the recently developed functionalized nanocarbon materials, for syngas conversions to either hydrocarbons or oxygenates. The unique features of carbon materials in dispersing metal nanoparticles, heteroatom doping, surface modification, and building special nanoarchitectures are highlighted. The key factors that control the reaction course and the reaction mechanism are discussed to gain insights for the rational design of efficient carbon-supported catalysts for syngas conversions. The challenges and future opportunities in developing functionalized carbon materials for syngas conversions are briefly analyzed.

Direct integration of ultralow-platinum alloy into nanocarbon architectures for efficient oxygen reduction in fuel cells

Developing efficient platinum (Pt)-based electrocatalysts is enormously significant for fuel cells. Herein, we report an integrated electrocatalyst of ultralow-Pt alloy encapsulated into nitrogen-doped nanocarbon architecture for efficient oxygen reduction reaction. This hybrid Pt-based catalyst achieves a mass activity of 3.46 A mg_pt^-1 at the potential of 0.9 V vs. RHE with a negligible stability decay after 10,000 cycles. More importantly, this half-cell activity can be expressed at full cell level with a high Pt utilization of 10.22 W mg_Pt^-1_cathode and remarkable durability after 30,000 cycles in single-cell. Experimental and theoretical investigations reveal that a highly strained Pt structure with an optimal Pt-O binding energy is induced by the incorporation of Co/Ni into Pt lattice, which would account for the improved reaction kinetics. The synergistic catalysis due to nitrogen-doped nanocarbon architecture and active Pt component is responsible for the enhanced catalytic activity. Meanwhile, the strong metal-support interaction and optimized hydrophilic properties of nanocarbon matrix facilitate efficient mass transport and water management. This work may provide significant insights in designing the low-Pt integrated electrocatalysts for fuel cells and beyond.

2D MOFs-based Materials for the Application of Water Pollutants Removing: Fundamentals and Prospects

Water quality can have serious impacts on human health. One crucial issue of water pollution seriously affects our safety due to the continually emerging of discovered anthropogenic pollutants. The water treatment technologies are persistent improvement to adapt such new contaminants, which accelerates the evolution of materials science to explore solving the problems. Metal-organic Frameworks (MOFs) as the significant porous and multi-dimensional networks has been concerned for toxic pollutant elimination, especially probed the applications of outstanding layered 2D skeletons MOFs-based materials. The emphases of this review highlight the 2D MOFs-based materials used in water remediation and treatment strategies including adsorption and catalysis methods. Further, the prospects and challenges of 2D MOFs-based materials for water treatments applications would be surveyed meticulously for the future research and development.

3D-Printed Porous Magnetic Carbon Materials Derived from Metal-Organic Frameworks

Here we report new porous carbon materials obtained by 3D printing from photopolymer compositions with zinc- and nickel-based metal–organic frameworks, ZIF-8 and Ni-BTC, followed by high-temperature pyrolysis. The pyrolyzed materials that retain the shapes of complex objects contain pores, which were produced by boiling zinc and magnetic nickel particles. The two thus provided functionalities—large specific surface area and ferromagnetism—that pave the way towards creating heterogenous catalysts that can be easily removed from reaction mixtures in industrial catalytic processes.

Carbon-based metal-free electrocatalysts: from oxygen reduction to multifunctional electrocatalysis

Since the discovery of N-doped carbon nanotubes as the first carbon-based metal-free electrocatalyst (C-MFEC) for oxygen reduction reaction (ORR) in 2009, C-MFECs have shown multifunctional electrocatalytic activities for many reactions beyond ORR, such as oxygen evolution reaction (OER), hydrogen evolution reaction (HER), carbon dioxide reduction reaction (CO₂RR), nitrogen reduction reaction (NRR), and hydrogen peroxide production reaction (H₂O₂PR). Consequently, C-MFECs have attracted a great deal of interest for various applications, including metal-air batteries, water splitting devices, regenerative fuel cells, solar cells, fuel and chemical production, water purification, to mention a few. By altering the electronic configuration and/or modulating their spin angular momentum, both heteroatom(s) doping and structural defects (e.g., atomic vacancy, edge) have been demonstrated to create catalytic active sites in the skeleton of graphitic carbon materials. Although certain C-MFECs have been made to be comparable to or even better than their counterparts based on noble metals, transition metals and/or their hybrids, further research and development are necessary in order to translate C-MFECs for practical applications. In this article, we present a timely and comprehensive, but critical, review on recent advancements in the field of C-MFECs within the past five years or so by discussing various types of electrocatalytic reactions catalyzed by C-MFECs. An emphasis is given to potential applications of C-MFECs for energy conversion and storage. The structure-property relationship for and mechanistic understanding of C-MFECs will also be discussed, along with the current challenges and future perspectives.

Nitrogen-Doped Carbon Composites with Ordered Macropores and Hollow Walls

Metal-organic frameworks provide versatile templates for the fabrication of various metal/carbon materials, but most of the derived composites possess only microspores, limiting the accessibility of embedded active sites. Herein, we report the construction of cobalt/nitrogen-doped carbon composites with a three-dimensional (3D) ordered macroporous and hollow-wall structure (H-3DOM-Co/NC) using a single-crystal ordered macropore (SOM)-ZIF-8@ZIF-67 as precursor. During the pyrolysis, the interconnected macroporous structure of SOM-ZIF-8@ZIF-67 is mostly preserved, whereas the pore wall achieves a solid-to-hollow transformation with Co nanoparticles formed in the hollow walls. The 3D-ordered macroporous carbon skeleton may effectively promote long-range mass transfer and the hollow wall can facilitate local accessibility of active sites. This unique structure can greatly boost its catalytic activity in the selective hydrogenation of biomass-derived furfural to cyclopentanol, much superior to its counterparts without this well-designed hierarchically porous structure.

Defect-Engineered NiCo-S Composite as a Bifunctional Electrode for High-Performance Supercapacitor and Electrocatalysis

Defect engineering is a reasonable solution to improve the surface properties and electronic structure of nanomaterials. However, how to introduce dual defects into nanomaterials by a simple way is still facing challenge. Herein, we propose a facile two-step solvothermal method to introduce Fe dopants and S vacancies into metal-organic framework-derived bimetallic nickel cobalt sulfide composites (NiCo-S). The as-prepared Fe-doped NiCo-S (Fe-NiCo-S) possesses improved charge storage kinetics and activities as electrode material for supercapacitors and the oxygen evolution reaction (OER). The obtained Fe-NiCo-S nanosheet has a high specific capacitance (2779.6 F g^-1 at 1 A g^-1) and excellent rate performance (1627.2 F g^-1 at 10 A g^-1). A hybrid supercapacitor device made of Fe-NiCo-S as the positive electrode and reduced graphene oxide (rGO) as the negative electrode presents a high energy density of 56.0 Wh kg^-1 at a power density of 847.1 W kg^-1 and excellent cycling stability (capacity retention of 96.5% after 10,000 cycles at 10 A g^-1). Additionally, the Fe-NiCo-S composite modified by Fe doping and S vacancy has an ultralow oxygen evolution overpotential of 247 mV at 10 mA cm^-2. Based on the density functional theory (DFT) calculation, defects cause more electrons to appear near the Fermi level, which is conducive to electron transfer in electrochemical processes. Our work provides a rational strategy for facilely introducing dual defects into metal sulfides and may provide a novel idea to prepare electrode materials for energy storage and energy conversion application.

Fe-based metal organic framework derivative with enhanced Lewis acidity and hierarchical pores for excellent adsorption of oxygenated volatile organic compounds

A series of Fe-based metal organic framework derived materials were prepared by thermal treating MIL-100(Fe) in nitrogen atmosphere for adsorption removal of oxygenated volatile organic compounds (OVOCs) such as methanol, formaldehyde and acetone under dynamic conditions. The experimental results showed that the partially carbonized M-350 material obtained by calcining MIL-100(Fe) at 350 °C exhibited the best adsorption performance and high stability. The breakthrough adsorption capacity of M-350 for methanol was 61.5% higher than that of pure MIL-100 (Fe), and it was 24.7, 6.5 and 2.6 times higher than that of commercial activated carbon, ZSM-5 and SAPO-34 adsorbents, respectively. The excellent adsorption performance was attributed to the exposure of abundant coordinatively unsaturated iron metal sites acting as Lewis acid sites through high temperature calcination, which had a strong affinity for OVOCs. Meanwhile, a hierarchical porous structure and high specific surface area further promoted the adsorption. This work provides new insights into the further development of metal organic frameworks based functional materials for VOCs removal and purification.

Molecular Design of 3D Porous Carbon Framework via One-Step Organic Synthesis

A new practical method for construction of 3D porous carbon was developed through molecular design via one-step synthesis from commercially available carbon tetrabromide and bis(trimethylsilyl)acetylene on a gram-scale, and the obtained porous carbon has a well-defined sp¹ -sp³ all-carbon structure (C₁₃ ), high stability, and high surface area.

Facile Synthesis of Boron and Nitrogen Dual-Doped Hollow Mesoporous Carbons for Efficient Reduction of 4-Nitrophenol

The development of heteroatom-doped carbons with fascinating hierarchical porosity is of great significance for the improvement of catalytic properties of carbon catalysts. In this work, we report a boron and nitrogen codoped hollow mesoporous carbon (denoted as BN/HMC) via a simple synthesis route by direct pyrolysis of phenylboronic acid/melamine/ZIF-8 precursors. Thanks to their high specific surface area, unique hollow mesoporous nanoarchitecture, rich defects, and boron and nitrogen codoping, the obtained BN/HMC-0.05 can be employed as a high-efficiency carbon-based catalyst for the reduction of 4-nitrophenol. Theoretical calculations reveal that the B and N codoping in a carbon matrix are essential for the adsorption and activation of 4-nitrophenol. The present work might pave a new way in construction of metal-free carbon catalysts with both heteroatom doping and hierarchical porosity for various applications.

Biomimetic Synthesis of Ultrafine Mixed-Valence Metal-Organic Framework Nanowires and Their Application in Electrochemiluminescence Sensing

Metal-organic frameworks (MOFs) prepared via typical procedures tend to exhibit issues like poor water stability and poor conductivity, which hinder their application in electrochemical sensing. Herein, we report a strategy for the preparation of mixed-valence ultrafine one-dimensional Ce-MOF nanowires based on a micelle-assisted biomimetic route and subsequent investigation into their growth mechanism. The prepared mixed-valence Ce-MOF nanowires exhibited a typical size of ∼50 nm and were found to present good water stability and high conductivity. On this basis, we examined the introduction of these nanowires into the luminol hydrogen peroxide luminescence system and proposed a novel dual-route self-circulating electrochemiluminescence (ECL) catalytic amplification mechanism. Finally, in combination with molecular imprinting, a MOF-based ECL sensor was developed for the detection of trace amounts of imidacloprid in plant-derived foods. This sensor exhibited a linearity of 2-120 nM and a detection limit of 0.34 nM. Thus, we proposed not only a novel route to MOF downsizing but also a facile and robust methodology for the design of a MOF-based molecular imprinting ECL sensor.

Metal-Organic Frameworks-Derived Self-Supported Carbon-Based Composites for Electrocatalytic Water Splitting

Electrocatalytic water splitting has been considered as a promising strategy for the sustainable evolution of hydrogen energy and storage of intermittent electric energy. Efficient catalysts for electrocatalytic water splitting are urgently demanded to decrease the overpotentials and promote the sluggish reaction kinetics. Carbon-based composites, including heteroatom-doped carbon materials, metals/alloys@carbon composites, metal compounds@carbon composites, and atomically dispersed metal sites@carbon composites have been widely used as the catalysts due to their fascinating properties. However, these electrocatalysts are almost powdery form, and should be cast on the current collector by using the polymeric binder, which would result in the unsatisfied electrocatalytic performance. In comparison, a self-supported electrode architecture is highly attractive. Recently, self-supported metal-organic frameworks (MOFs) constructed by coordination of metal centers and organic ligands have been considered as suitable templates/precursors to construct free-standing carbon-based composites grown on conductive substrate. MOFs-derived carbon-based composites have various merits, such as the well-aligned array architecture and evenly distributed active sites, and easy functionalization with other species, which make them suitable alternatives to non-noble metal-included electrocatalysts. In this review, we intend to show the research progresses by employment of MOFs as precursors to prepare self-supported carbon-based composites. Focusing on these MOFs-derived carbon-based nanomaterials, the latest advances in their controllable synthesis, composition regulation, electrocatalytic performances in hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and overall water splitting (OWS) are presented. Finally, the challenges and perspectives are showed for the further developments of MOFs-derived self-supported carbon-based nanomaterials in electrocatalytic reactions.