Catalytically active nanomaterials: a promising candidate for artificial enzymes

Light-activated oxidize-mimicking nanozyme for inhibition of pathogenic Escherichia coli

Here we demonstrate the nanozyme properties of histidine-containing carbon nanodots as externally tunable antibacterial agents through irradiation with visible (VIS) light. The correlative (light and electron) microscopic analysis of treated Escherichia coli O157:H7 revealed that the positive charged carbon nanoparticles might readily adsorb at slightly acid pH on the negative charged cellular envelope of bacteria, and thus, inhibit their growth with over 80% efficiency under illumination with VIS light. The reason was that under VIS irradiation in the range 400-500 nm the adsorbed nanoparticles behaved as effective oxidase-mimicking enzymes and generated reactive oxygen species on the labeled cells. Thus, the light-activated artificial nanozyme caused serious physical damaging of bacterial envelope, which was leading to irreversible cellular inhibition. The outcomes of this study are likely to broaden the scope of designed photoactive carbon nanozymes as powerful antibacterial agents against the emergence of antibiotic and multidrug-resistant strains, as well as proposing of new strategies for infection control.

Colorimetric assay for the detection of dopamine using bismuth ferrite oxide (Bi2Fe4O9) nanoparticles as an efficient peroxidase-mimic nanozyme

This work describes the preparation of ternary bismuth ferrite oxide nanoparticles (Bi₂Fe₄O₉ NPs) with an enzyme mimetic activity for dopamine (DA) qualitative and quantitative detection. Bi₂Fe₄O₉ NPs were prepared using a facile, low cost, and one-pot hydrothermal treatment. The chemical composition, morphology, and optical properties of Bi₂Fe₄O₉ nanozyme were characterized using different techniques such as Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction pattern (XRD), X-ray photoelectron spectroscopy (XPS), thermo-gravimetric analysis (TGA), dynamic light scattering (DLS), field-emission scanning electron microscopy (FESEM) imaging, FESEM-energy dispersive X-ray spectroscopy (EDS), UV-vis absorption, and fluorescence emission spectroscopy. Bi₂Fe₄O₉ NPs were utilized to catalyze the oxidation of a typical chromogenic peroxidase substrate, 3,3',5,5'-tetramethylbenzidine (TMB), to form the blue-colored oxidized product (oxTMB), in the presence of hydrogen peroxide (H₂O₂). All reactions occurred in acetate buffer solution (pH 3.5) to generate hydroxyl radicals (^•OH) and the kinetics were followed by UV-vis absorbance at 654 nm. The steady-state kinetic parameters were obtained from the Michaelis-Menten equation and exhibited a good catalytic efficiency of Bi₂Fe₄O₉ NPs as enzyme mimetics. Michaelis-Menten constant (K_m) values were estimated as 0.07 and 0.73 mM for TMB and H₂O₂, respectively. The presented method is efficient, rapid, cost-effective, and sensitive for the colorimetric detection of dopamine with a linear range (LR) from 0.15 to 50 μM and a detection limit (LOD) of 51 nM. The proposed colorimetric sensor was successfully applied for the detection of different concentrations of dopamine in spiked fetal bovine serum (FBS) and horse serum (HS) samples. It is anticipated that Bi₂Fe₄O₉ nanozyme holds great potential in biomedical analysis and diagnostic applications of dopamine-related diseases.

A novel CuCoS nanozyme for synergistic photothermal and chemodynamic therapy of tumors

Multifunctional CuCoS nanoparticles with photothermal converters and dual enzymatic activities have been designed for the synergistic photothermal and chemodynamic therapy of tumors.

Colorimetric detection of glucose by a hybrid nanomaterial based on amplified peroxidase-like activity of ferrosoferric oxide modified with gold–platinum heterodimer

An easy and sensitive colorimetric sensor based on the Fe3O4@Au–Pt hybrid nanomaterial was constructed for H2O2 and glucose detection.

Recent development in the design of artificial enzymes through molecular imprinting technology

Enzymes, a class of proteins or RNA with high catalytic efficiency and specificity, have inspired generations of scientists to develop enzyme mimics with similar capabilities. Many enzyme mimics have been...

Nanoarmored Multi-Enzyme Cascade Catalysis

This chapter reports a single-step preparation of nanoarmored bi-enzyme systems assembled on 1-D and 2-D nanomaterials, with glucose oxidase and peroxidase enzymes as model systems for cascade bio-catalysis. This is a simple and facile method to both exfoliate the bulk 1D (carbon nanotubes, CNT) and 2D nanomaterials (α-Zirconium phosphate, α-ZrP) and bind the enzymes in a single step. Exfoliation of the bulk material enhances the accessible surface area of the materials for the enzyme binding, and it also boosts the diffusion of reagents from the bulk phase to the active sites of the bio-catalysts. For example, a mixture of horseradish peroxidase, glucose oxidase, and bovine serum albumin (BSA) were adsorbed on the surfaces of the α-ZrP nanoplates or carbon nanotubes (CNT) as the bulk materials are exfoliated simultaneously, in a one-step process. The resulting bio-catalysts were thoroughly characterized by powder X-ray diffraction, electron microscopy, biochemical and biophysical methods, while enzyme activity studies proved successful binding of enzymes with retention of activities or even enhancements in their specific activities. For example, GOx/HRP/BSA/CNT displayed 6 times the activity of a mixture of GOx/HRP/BSA, under otherwise identical conditions. Similarly, GOx/HRP/BSA/ZrP had 3.5 times the activity of the corresponding mixture of GOx/HRP/BSA, in the absence of the nanoplates. These robust nano-dispersions worked extraordinarily well as active bio-catalysts. These two kinds of fabricated biocatalyst dispersions are also highly stable.

Facile Synthesis of Pd-Ir Nanocubes for Biosensing

Displaying extremely high peroxidase-like activity and uniform cubic structure enclosed by (100) facets, Pd-Ir nanocubes are an attractive nanomaterial for bioanalysis. However, there exists a great challenge to deposit atomic layers of Ir on the surface of Pd nanocubes due to the relatively low energy barrier of homogeneous nucleation of Ir atoms compared to heterogeneous nucleation. Here, a simple and surfactant-free approach is presented to synthesize Pd-Ir nanocubes with atomic Ir shell thickness in an aqueous solution at room temperature. Biomolecules such as antibodies and nucleic acids have free access to the surface of Pd-Ir nanocubes. Applications of Pd-Ir nanocubes in immunoassays and aptamer-based biosensors are realized, exploiting the excellent peroxidase activity and fluorescence quenching ability of Pd-Ir nanocubes. This work makes a significant step forward towards the practical utility of Pd-Ir nanocubes in bioanalysis.

Advanced bioactive nanomaterials for biomedical applications

Bioactive materials are a kind of materials with unique bioactivities, which can change the cellular behaviors and elicit biological responses from living tissues. Bioactive materials came into the spotlight in the late 1960s when the researchers found that the materials such as bioglass could react with surrounding bone tissue for bone regeneration. In the following decades, advances in nanotechnology brought the new development opportunities to bioactive nanomaterials. Bioactive nanomaterials are not a simple miniaturization of macroscopic materials. They exhibit unique bioactivities due to their nanoscale size effect, high specific surface area, and precise nanostructure, which can significantly influence the interactions with biological systems. Nowadays, bioactive nanomaterials have represented an important and exciting area of research. Current and future applications ensure that bioactive nanomaterials have a high academic and clinical importance. This review summaries the recent advances in the field of bioactive nanomaterials, and evaluate the influence factors of bioactivities. Then, a range of bioactive nanomaterials and their potential biomedical applications are discussed. Furthermore, the limitations, challenges, and future opportunities of bioactive nanomaterials are also discussed.

Accelerated discovery of superoxide-dismutase nanozymes via high-throughput computational screening

The activity of nanomaterials (NMs) in catalytically scavenging superoxide anions mimics that of superoxide dismutase (SOD). Although dozens of NMs have been demonstrated to possess such activity, the underlying principles are unclear, hindering the discovery of NMs as the novel SOD mimics. In this work, we use density functional theory calculations to study the thermodynamics and kinetics of the catalytic processes, and we develop two principles, namely, an energy level principle and an adsorption energy principle, for the activity. The first principle quantitatively describes the role of the intermediate frontier molecular orbital in transferring electrons for catalysis. The second one quantitatively describes the competition between the desired catalytic reaction and undesired side reactions. The ability of the principles to predict the SOD-like activities of metal-organic frameworks were verified by experiments. Both principles can be easily implemented in computer programs to computationally screen NMs with the intrinsic SOD-like activity.

Ligand-Modulated Catalytic Selectivity of Ag Clusterzyme for Relieving Multiorgan Injury via Inhabiting Acute Oxidative Stress

The artificial enzymes at the atomic level have shown great potential in chemical biology and nanomedicine, and modulation of catalytic selectivity is also critical to the application of nanozymes. In this work, atomic precision Ag25 clusterzymes protected by single- and dual-ligand were developed. Further, the catalytic activity and selectivity of Ag25 clusterzymes were modulated by adjusting doping elements and ligand. The Ag24Pt1 shows more prominent antioxidant activity characteristics in the dual-ligand system, while the Ag24Cu1 possesses the superoxide dismutase-like (SOD-like) activity regardless of the single- or dual-ligand system, indicating modulated catalytic selectivity. In vitro experiments showed the Ag24Pt1-D can recover radiation induced DNA damages and eliminate the excessive reactive oxygen species (ROS) generated from radiation. Subsequent in vivo radiation protection experiments reveal that Ag24Cu1-S and Ag24Pt1-D can improve the survival rate of irradiated mice from 0 to 40% and 30%, respectively. The detailed biological experiments confirm that the Ag24Cu1-S and Ag24Pt1-D can recover the SOD and 3,4-methylenedioxyamphetamine (MDA) levels via suppressing the chronic inflammation reaction. Nearly 60% of Ag24Cu1-S and Ag24Pt1-D can be excreted after a 1 day injection, and no obvious toxicological reactions were observed 30 days after injection.

Template-Regulated Bimetallic Sulfide Nanozymes with High Specificity and Activity for Visual Colorimetric Detection of Cellular H2O2

For the past several decades, most of the research studies on nanozymes have been aimed at improving their catalytic activity and diversity; however, developing nanozymes with strong catalytic activity and great specificity remains a challenge. Herein, a simple and efficient template synthesis method was used to synthesize bimetallic sulfide nanoparticles, NiCo₂S₄ NPs, and prove that they have excellent peroxidase-like activity with good specificity. By regulating polyvinyl pyrrolidone (PVP) and hexadecyl trimethyl ammonium bromide as the templating agent, we have obtained the NiCo₂S₄ (PVP) NPs with a high Ni/Co ratio, thus exhibiting superior peroxidase activity. In addition, the NiCo₂S₄ NPs selectively catalyzed and oxidized colorless 3,3,5,5-tetramethylbenzidine (TMB). On being treated with H₂O₂, TMB turns blue while other substrates did not undergo the oxidation reaction under the same conditions, such as 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium (ABTS) and dopamine. The high specificity of NiCo₂S₄ NPs is due to the strong electrostatic driving coordination between negatively charged NiCo₂S₄ NPs and positively charged TMB. Due to the peroxidase activity of the developed NiCo₂S₄ NPs, a simple, low-cost, and reliable colorimetric method was established. Simultaneously, this method for in situ quantitative monitoring of H₂O₂ produced by MDA-MB-231 cells was also achieved. This study has provided a theoretical basis for the improvement of the activity and specificity of bimetallic sulfide nanozymes and may offer guidance for the further reasonable design of related materials.

Optimization of Nanostructured Copper Sulfide to Achieve Enhanced Enzyme-Mimic Activities for Improving Anti-Infection Performance

Advanced antibacterial methods are urgently needed to deal with possible infectious diseases. As promising alternatives to antibiotics, enzyme-mimic nanocatalysts face bottlenecks of low activities and indistinct catalytic mechanisms, which seriously restrict their development for anti-infection treatment. Herein, metastable copper sulfide (Cu_2-xS) nanozymes with diversiform sizes and compositions were selected to adjust the electronic structure for enhancing enzyme-mimic activities. The as-synthesized large and thin nanoplates (L/TN nanoplates), with the stoichiometric ratio of Cu_1.25S, were proven to possess the optimal peroxidase (POD)-mimic activity. Using quantum mechanics, it was theoretically revealed that the sulfur vacancies could alter the electronic structure of copper active sites and thus reduce the reaction energy barrier of H₂O₂ to·OH to promote the POD-mimic performance. Moreover, through enhanced enzyme-mimic activities, L/TN nanoplates achieved efficient depletion of glutathione and ascorbic acid for improving antibacterial performances. Further, synergizing with the NIR irradiation, the satisfactory destruction capability for bacteria and biofilm was achieved for L/TN nanoplates under an inflammatory level of hydrogen peroxide (50 μM). Altogether, this work provides a deeper understanding of geometrical and electronic properties-dependent antibacterial performance, and paves the way toward precise compositions and structures engineering of nanozymes.

An amino acid-based supramolecular nanozyme by coordination self-assembly for cascade catalysis and enhanced chemodynamic therapy towards biomedical applications

The clinical translation of chemodynamic therapy has been highly obstructed by the insufficient intracellular H2O2 level in diseased tissues. Herein, we developed a supramolecular nanozyme through a facile one-step cooperative coordination self-assembly of an amphipathic amino acid and glucose oxidase (GOx) in the presence of Fe2+. The results demonstrated that the supramolecular nanozyme possessed cascade enzymatic activity (i.e., GOx and peroxidase), which could amplify the killing efficacy of hydroxyl radicals (˙OH) via self-supplying H2O2, finally achieving synergistic starvation-chemodynamic cancer therapy in vitro. Additionally, this cascade nanozyme also exhibited highly effective antibacterial activity on Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) without the need for additional H2O2. This work provided a promising strategy for the design and development of nanozymes for future biomedical applications.

Emissive oxidase-like nanozyme based on an organic molecular cage

In this study, we introduced four "claw-like" units of dipicolylamine (DPA) to a tetraphenylethylene (TPE)-based organic molecular cage (DPA-TPE-Cage). Coordinated with Zn²⁺ ions, the obtained ZnDPA-TPE-Cage exhibited aggregation induced emission (AIE) effects and oxidase-like properties, which endowed it with the ability to selectively image and kill Gram-positive bacteria S. aureus efficiently.

Biocatalytic CsPbX3 Perovskite Nanocrystals: A Self-Reporting Nanoprobe for Metabolism Analysis

CsPbX₃ perovskite nanocrystals (NCs), with excellent optical properties, have drawn considerable attention in recent years. However, they also suffer from inherent vulnerability and hydrolysis, causing the new understanding or new applications to be difficultly explored. Herein, for the first time, it is discovered that the phospholipid membrane (PM)-coated CsPbX₃ NCs have intrinsic biocatalytic activity. Different from other peroxidase-like nanozymes relying on extra chromogenic reagents, the PM-CsPbX₃ NCs can be used as a self-reporting nanoprobe, allowing an "add-to-answer" detection model. Notably, the fluorescence of PM-CsPbX₃ NCs can be rapidly quenched by adding H₂ O₂ and then be restored by removing excess H₂ O₂ . Initiated from this unexpected observation, the PM-CsPbX₃ NCs can be explored to prepare multi-color bioinks and metabolite-responsive paper analytical devices, demonstrating the great potential of CsPbX₃ NCs in bioanalysis. This is the first report on the discovery of nanozyme-like property of all-inorganic CsPbX₃ perovskite NCs, which adds another piece to the nanozyme puzzle and opens new avenues for in vitro disease diagnostics.

Colorimetric detection of human alpha-2-macroglobulin by janus imprinted nanoparticles constructed dual molecular imprinting immunosandwich strategy

Simple and rapid detection of disease-related bio-markers are significant for early clinical diagnosis and can potentially improve the survival rate. However, establishing a high-specificity colorimetric detection method for bio-markers are still challenges due to their inevitable natural antibody used or enzymatic labeling. Herein, a cost-efficient and easy-to-use approach, which called dual molecular imprinting immunosandwich colorimetric strategy (DMI-ICS) was constructed for detection alpha-2-macroglobulin (α2MG) by janus imprinted nanoparticles. The unique detection principle was contained with two mimic antibody parts, the first part was α2MG glass slides molecularly imprinted material (GS-MIP) as a "Separation antibody", which can specifically rapid separate the protein in the complex sample; Another part was asymmetrically modified janus molecularly imprinted gold nanoparticles nanozyme (J-GNPs-MIP) as a "Detection antibody", which has the properties of specific recognition and catalytic substrate color performance at the same time. The concentration of α2MG can be determined by the substrate color changes and observed with naked eyes. Under the optimized conditions, the DMI-ICS had a great performance and offering lower relative standard deviation (RSD, 7.69%), good linear range (0.297-130 μg/mL, R² = 0.994), high imprinting factor (IF: 3.74) with lower detection limit (0.089 μg/mL). This strategy provides an easy operation and low cost signal readout method for direct detection and separation of α2MG in human serum samples, which is a versatile tool for point-of-care diagnosis, while also offering a new perspective on antibody simulation technology, multifunctional antibody preparation and contribute to detection of disease-related bio-marker in nonspecialized laboratory infrastructure.

Unveiling the Actual Catalytic Sites in Nanozyme-Catalyzed Oxidation of o-Phenylenediamine

Nanozymes have offered remarkable advantages over natural enzymes and found widespread applications including biosensors, immunoassays, nanomedicines, and environmental remediation. Oxidation of o-phenylenediamine (OPD) by nanozymes has been listed as a standard protocol for determining nanozyme activities. Given the complexity of OPD oxidation processes, however, the mechanism of nanozyme-catalyzed oxidation of OPD remains elusive. In this report, mechanistic studies of nanozyme-catalyzed oxidation of OPD are performed and a distinguishably different mechanism from that of natural enzymes is found. A combination of Fourier transform infrared spectroscopy, nuclear magnetic resonance, electrospray ionization mass spectrometry, and electron microscopic studies provides compelling evidence that polymerization of OPD occurs on the surface of several different nanozymes. The unexpected polymerization causes a dense coating layer of poly(o-phenylenediamine) (POPD) on nanozymes renders the intrinsic properties of nanozymes. Therefore, this fundamental discovery raise serious concerns using OPD-based colorimetric method for determining nanozyme activities. Without examining the surface change of nanozymes after catalytic reactions, the use of OPD-based colorimetric method for determining nanozyme activities is strongly discouraged. Furthermore, POPD is discovered as a new oxidase mimic, and this new mechanism also provides a general and robust method to coat nanomaterials with POPD polymers of enzyme-mimicking properties.

Engineering the Stability of Nanozyme-Catalyzed Product for Colorimetric Logic Gate Operations

Recently, the design and development of nanozyme-based logic gates have received much attention. In this work, by engineering the stability of the nanozyme-catalyzed product, we demonstrated that the chromogenic system of 3, 3′, 5, 5′-tetramethylbenzidine (TMB) can act as a visual output signal for constructing various Boolean logic operations. Specifically, cerium oxide or ferroferric oxide-based nanozymes can catalyze the oxidation of colorless TMB to a blue color product (oxTMB). The blue-colored solution of oxTMB could become colorless by some reductants, including the reduced transition state of glucose oxidase and xanthine oxidase. As a result, by combining biocatalytic reactions, the color change of oxTMB could be controlled logically. In our logic systems, glucose oxidase, β-galactosidase, and xanthine oxidase acted as inputs, and the state of oxTMB solution was used as an output. The logic operation produced a colored solution as the readout signal, which was easily distinguished with the naked eye. More importantly, the study of such a decolorization process allows the transformation of previously designed AND and OR logic gates into NAND and NOR gates. We propose that this work may push forward the design of novel nanozyme-based biological gates and help us further understand complex physiological pathways in living systems.

Enhancing of Nanocatalyst-Driven Chemodynaminc Therapy for Endometrial Cancer Cells Through Inhibition of PINK1/Parkin-Mediated Mitophagy

Purpose

Iron-based nanomaterials have recently been developed as excellent and potent Fenton reagents to reactive oxygen species (ROS) during chemodynamic therapy (CDT). The performance of the materials, however, can be impaired by the intrinsic antioxidant defense mechanism in organisms, such as autophagy.

Methods

The nanoscale metal-organic frameworks (nMOFs), nMIL-100 (Fe), were exploited and characterized. Also, the Fenton-like catalytic characteristics, anti-endometrial cancer (EC) effects and potential mechanisms of nMIL-100 (Fe) nanoparticles were investigated in vitro.

Results

The synthesized nMIL-100 (Fe) nanocatalyst catalyzed hydroxyl radicals (·OH) production in the presence of hydrogen peroxide (H₂O₂) and simultaneously depleted intracellular glutathione (GSH). Combining with H₂O₂, nMIL-100 (Fe) nanoparticles exhibited enhanced cytotoxicity for EC cells, especially for progesterone treatment-insensitive KLE cells, probably due to relatively lower expression of the catalase gene. The accumulated ·OH initiated PTEN induced putative kinase 1 (PINK1)/E3 ubiquitin-protein ligase Parkin-mediated cytoprotective mitophagy in turn to partially rescue ·OH-induced cell apoptosis. Furthermore, both pretreatments of EC cells with siRNA-mediated Parkin knockdown and Mdivi-1 (a mitophagy inhibitor) addition were sufficient to ensure nMIL-100 (Fe) synergizing with H₂O₂-induced oxidative damages.

Conclusion

These results suggest that the degree of mitophagy should be taken into consideration to optimize therapeutic efficiency when developing ROS based-CDT for EC cancer therapies. Therefore, a nMIL-100 (Fe)-guided, elevated ROS and overwhelmed mitophagy-mediated therapeutic strategy may have greater promise for EC therapy compared with current treatment modalities.

Copper sulfide nanoclusters with multi-enzyme-like activities and its application in acid phosphatase sensing based on enzymatic cascade reaction

Nanozymes are artificial enzymes, which can substitute natural enzymes for wide range of catalysis-based applications. However, it is challenging to explore novel mimic enzymes or multi-enzyme mimics. Herein we report the facile preparation of uniform CuS nanoclusters (NCs), which possessed outstanding tetra-enzyme mimetic catalytic activities, including peroxidase (POD)-mimics, catalase (CAT)-mimics, ascorbic acid oxidase (AAO)-mimics and superoxide dismutase (SOD)-mimics. The catalytic mechanism of POD-like was coming from the oxygen vacancies of CuS. Furthermore, the steady-state kinetics of POD-, CAT- and AAO mimics of CuS NCs were systematically explored. On basis of the enzymatic cascade reaction that acid phosphatase (ACP) involved in a weak acidic environment, in the presence of O-phenylenediamine, quinoxaline fluorescent substance will be generated. Thus, a fluorescent biosensor platform was proposed for detection of ACP with the linear range of 0.05-25 U L^-1 and limit of detection of 0.01 U L^-1. The as-proposed method was applicable to real serum sample detection accurately and reproducibly. Considering the simple preparation, good stability, excellent multi-enzyme activities and controllable experimental operation, CuS NCs would provide a basis for expanding to other biocatalytic and biomedical applications.

Progress in the Application of Carbon Dots-Based Nanozymes

As functional nanomaterials with simulating enzyme-like properties, nanozymes can not only overcome the inherent limitations of natural enzymes in terms of stability and preparation cost but also possess design, versatility, maneuverability, and applicability of nanomaterials. Therefore, they can be combined with other materials to form composite nanomaterials with superior performance, which has garnered considerable attention. Carbon dots (CDs) are an ideal choice for these composite materials due to their unique physical and chemical properties, such as excellent water dispersion, stable chemical inertness, high photobleaching resistance, and superior surface engineering. With the continuous emergence of various CDs-based nanozymes, it is vital to thoroughly understand their working principle, performance evaluation, and application scope. This review comprehensively discusses the recent advantages and disadvantages of CDs-based nanozymes in biomedicine, catalysis, sensing, detection aspects. It is expected to provide valuable insights into developing novel CDs-based nanozymes.

Facile in situ microwave synthesis of Fe3O4@MIL-100(Fe) exhibiting enhanced dual enzyme mimetic activities for colorimetric glutathione sensing

In recent decades, artificial nanozymes with excellent stability, low cost and availability have been gradually explored to avoid the limits of natural enzymes such as poor stability, high cost and difficult preparation. Herein, for the first time, we investigated the capability of nanoscale Fe₃O₄@MIL-100(Fe) as a nanozyme, which was quickly synthesized in situ by a microwave-assisted method within 20 min using Fe₃O₄ as the metal precursor. The obtained Fe₃O₄@MIL-100(Fe) showed satisfactory intrinsic dual enzyme mimetic activities, including peroxidase (POD)- and catalase (CAT)-like activities. Moreover, a simple and effective colorimetric biosensor was fabricated to detect glutathione (GSH) based on its POD-like activity. The proposed measurement had a linear range of 1-45 μM and a limit of detection (LOD) of 0.26 μM (3.3 δ/S). It was proved that the established colorimetric sensing system could be successfully applied to detect GSH in actual biological samples. Importantly, the outstanding reusability and stability made it extremely valuable as a catalyst. The present work implied that Fe₃O₄@MIL-100(Fe) synthesized in situ by the microwave-assisted method was a very promising candidate for biocatalyst and biosensing.

Development of a Smartphone-Based Nanozyme-Linked Immunosorbent Assay for Quantitative Detection of SARS-CoV-2 Nucleocapsid Phosphoprotein in Blood

Since December 2019, a novel coronavirus (SARS-CoV-2) has resulted in a global pandemic of coronavirus disease (COVID-19). Although viral nucleic acid test (NAT) has been applied predominantly to detect SARS-CoV-2 RNA for confirmation diagnosis of COVID-19, an urgent need for alternative, rapid, and sensitive immunoassays is required for primary screening of virus. In this study, we developed a smartphone-based nanozyme-linked immunosorbent assay (SP-NLISA) for detecting the specific nucleocapsid phosphoprotein (NP) of SARS-CoV-2 in 37 serum samples from 20 COVID-19 patients who were diagnosed by NAT previously. By using SP-NLISA, 28/37 (75.7%) serum samples were detected for NP antigens and no cross-reactivity with blood donors' control samples collected from different areas of China. In a control assay using the conventional enzyme-linked immunosorbent assay (ELISA), only 7/37 (18.91%) serum samples were detected for NP antigens and no cross-reactivity with control samples. SP-NLISA could be used for rapid detection of SARS-CoV-2 NP antigen in primary screening of SARS-CoV-2 infected individuals.

Reactive oxygen species-based nanomaterials for the treatment of myocardial ischemia reperfusion injuries

Interventional coronary reperfusion strategies are widely adopted to treat acute myocardial infarction, but morbidity and mortality of acute myocardial infarction are still high. Reperfusion injuries are inevitable due to the generation of reactive oxygen species (ROS) and apoptosis of cardiac muscle cells. However, many antioxidant and anti-inflammatory drugs are largely limited by pharmacokinetics and route of administration, such as short half-life, low stability, low bioavailability, and side effects for treatment myocardial ischemia reperfusion injury. Therefore, it is necessary to develop effective drugs and technologies to address this issue. Fortunately, nanotherapies have demonstrated great opportunities for treating myocardial ischemia reperfusion injury. Compared with traditional drugs, nanodrugs can effectively increase the therapeutic effect and reduces side effects by improving pharmacokinetic and pharmacodynamic properties due to nanodrugs’ size, shape, and material characteristics. In this review, the biology of ROS and molecular mechanisms of myocardial ischemia reperfusion injury are discussed. Furthermore, we summarized the applications of ROS-based nanoparticles, highlighting the latest achievements of nanotechnology researches for the treatment of myocardial ischemia reperfusion injury.

•

Cardiovascular diseases are the leading cause of death worldwide. Researches of the myocardial infarction pathology and development of new treatments have very important scientific significance in the biomedical field.

•

Many nanomaterials have shown amazing therapeutic effects to reduce myocardial damage by eliminating ROS.

•

Nanomaterials effectively reduced myocardial damage through eliminating ROS from NOXs, M-ETC, M-Ca²⁺, M-mPTP, and RIRR.

Oxygen Vacancy-Driven Reversible Free Radical Catalysis for Environment-Adaptive Cancer Chemodynamic Therapy

Amplifying free radical production by chemical dynamic catalysis to cause oxidative damage to cancer cells has received extensive interest for cancer-specific therapy. The major challenge is inevitable negative modulation on the tumor microenvironment (TME) by these species, hindering durable effectiveness. Here we show for the first time an oxygen vacancy-rich Bi-based regulator that allows environment-adaptive free radical catalysis. Specifically, the regulator catalyzes production of highly toxic O₂ ^.- and ^. OH in cancer cells via logic enzymatic reactions yet scavenges accumulation of free radicals and immunosuppressive mediators in TME-associated noncancerous cells. Atomic-level mechanistic studies reveal that such dual-modal regulating behavior is dominated by oxygen vacancies that well fit for free radical catalytic kinetics, along with distinguished cellular fates of this regulator. With this smart regulator, a "two birds with one shot" cancer dynamic therapy can be expected.

Enhanced Artificial Enzyme Activities on the Reconstructed Sawtoothlike Nanofacets of Pure and Pr-Doped Ceria Nanocubes

In this work, a simple one-step thermal oxidation process was established to achieve a significant surface increase in {110} and {111} nanofacets on well-defined, pure and Pr-doped, ceria nanocubes. More importantly, without changing most of the bulk properties, this treatment leads to a remarkable boost of their enzymatic activities: from the oxidant (oxidase-like) to antioxidant (hydroxyl radical scavenging) as well as the paraoxon degradation (phosphatase-like) activities. Such performance improvement might be due to the thermally generated sawtoothlike {111} nanofacets and defects, which facilitate the oxygen mobility and the formation of oxygen vacancies on the surface. Finally, possible mechanisms of nanoceria as artificial enzymes have been proposed in this manuscript. Considering the potential application of ceria as artificial enzymes, this thermal treatment may enable the future design of highly efficient nanozymes without changing the bulk composition.

Mesoporous MnFe2O4 magnetic nanoparticles as a peroxidase mimic for the colorimetric detection of urine glucose

Mesoporous MnFe₂O₄ magnetic nanoparticles (mMnFe₂O₄ MNPs) were prepared with a one-step synthesis method and characterized to possess intrinsic peroxidase-like activity, and had obvious advantages over other peroxidase nanozymes in terms of high catalytic affinity, high stability, mono-dispersion, easy preparation, and quick separation. The mMnFe₂O₄ MNPs were used as a colorimetric sensor for indirect sensing of urine glucose based on the sensing principle that H₂O₂ can be produced from glucose oxidation catalyzed by glucose oxidase (GOx), and under the catalysis of the mMnFe₂O₄ MNPs nanozyme, H₂O₂ can oxidize 3,3′,5,5′-tetramethylbenzidine (TMB) to produce a blue color in a few minutes. This sensor is simple, cheap, sensitive, and specific to glucose detection with a detection limit of 0.7 μM, suggesting its potential for on-site glucose detection.

Schematic illustration of glucose detection with glucose oxidase (GOx) and mMnFe₂O₄ MNPs-catalyzed system.

Self-cascade MoS2 nanozymes for efficient intracellular antioxidation and hepatic fibrosis therapy

Cascade biocatalytic reactions involving multiple antioxidative enzymes are necessary in living cells to regulate cellular metabolism and redox homeostasis. Substantial efforts have been made to construct cascade reactions through engineered enzyme mimics to improve intracellular metabolic flux, especially under pathophysiological conditions. Here, we show that MoS₂ nanozymes exhibit activities of four major cellular cascade antioxidant enzymes, including superoxide dismutase, catalase, peroxidase, and glutathione peroxidase. Meanwhile, MoS₂ nanozymes attenuate electron transfer in cytochrome c/H₂O₂ to ameliorate the inherent antioxidant defense system under stress conditions. Thus, MoS₂ nanozymes function as a self-cascade platform to inhibit intracellular reactive oxygen species (ROS) production by modulating mitochondrial function and scavenging abundant ROS through their intrinsic antioxidant capacity. Density functional theory calculations reveal the underlying mechanisms of the intracellular environment-dependent catalase-like activity of MoS₂ nanozymes. Furthermore, we find that the MoS₂ nanozymes play a cytoprotective role in cells and significantly improve the treatment outcomes in a hepatic fibrosis mouse model. These results demonstrate the ROS-scavenging capacity of a single-component MoS₂ nanozyme-based cascade reaction system and reveal the in-depth mechanism, which may advance the development of nanozyme-based antioxidative agents.

Heterojunction of Vertically Arrayed MoS2 Nanosheet/N-Doped Reduced Graphene Oxide Enabling a Nanozyme for Sensitive Biomolecule Monitoring

Enzymes are still indispensable for bio-assaying methods in biomolecule detection by far. The unsatisfied long-term instability, high cost, and susceptibility to the physical environment of natural enzymes are obvious weak points. Here, we developed peroxidase-like heterostructured nanozyme, vertically arraying molybdenum disulfide nanosheets on a substrate layer of nitrogen-doped reduced graphene oxide (MoS₂/N-rGO), with a well-pleasing stability that is characterized by the retained enzymatic activity and maintained structure after 2 years of casual storage at ambient temperatures or 80 cycles of catalytic reaction. The catalytic kinetics of the as-prepared heterostructured nanozyme was superior to some reported nanozymes and even horse radish peroxidase, which was demonstrated due to the defect-rich MoS₂ with Mo and S vacancies and nitrogen-doped rGO experimentally and theoretically. The vertically heterostructured nanozyme exhibited adequate analytical performance in sensitive and quantitative detection of glucose and glutathione (GSH), with a large dynamic sensing range and extremely low limit of detection (0.02 and 0.12 μM (3σ/slope) for glucose and GSH, respectively). We hope this inspired artificial nanozyme will contribute to the future development in sensitive detection of other biomolecules in physiological conditions.

Biocatalytic Nanomaterials: A New Pathway for Bacterial Disinfection

Clinical treatment of pathogenic infection has emerged as a growing challenge in global public health. Such treatment is currently limited to antibiotics, but abuse of antibiotics have induced multidrug resistance and high fatality rates in anti-infection therapies. Thus, it is vital to develop alternative bactericidal agents to open novel disinfection pathways. Drawing inspiration from elements of the human immune system that show great potential for controlling pathogens or regulating cell apoptosis, the design of biocatalytic nanomaterials (BCNs) have provided unrivaled opportunities for future antibacterial therapies. More significantly, BCNs exhibit various superior properties to immune cells and natural enzymes, such as higher biocatalytic performance, extraordinary stability against harsh conditions, and scalable production. In this review, the most recent efforts toward developing BCN-based biomedical applications in combating bacterial infections are focused upon. BCNs' antibacterial mechanisms, the classification of BCNs, antibacterial activities that can be triggered or augmented by energy conversion, and the eradication of biofilms with BCNs are systematically introduced and discussed. The current challenges and prospects of BCNs for biocatalytic disinfection are also summarized. It is anticipated this review will provide new therapeutic insights into combating bacteria and biofilms and offer significant new inspiration for designing future biocatalytic nanomaterials.

Fe-Coordinated Carbon Nanozyme Dots as Peroxidase-Like Nanozymes and Magnetic Resonance Imaging Contrast Agents

The catalytic activities of currently developed peroxidase-mimic nanozymes are generally limited. Therefore, further efforts are still needed to improve the catalytic performance of peroxidase nanozymes. Herein, we synthesized Fe-coordinated carbon nanozyme dots (Fe-CDs) that can serve as both efficient peroxidase nanozymes and T₂-magnetic resonance imaging (MRI) contrast agents. The intrinsic peroxidase-like activity of the Fe-CDs was explored by catalytic oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) with hydrogen peroxide (H₂O₂). The product showed better performance over natural horseradish peroxidase (HRP) and other mimetic peroxidases. Quantification of glucose and ascorbic acid detection showed that this nanozyme could be used to detect a minimum limit as low as 5 μM glucose. Moreover, the colorimetric detection technique was used to detect serum glucose in mice, and the detection result was comparable with autobiochemistry analyzer results using a glucose assay kit. Furthermore, the Fe-CDs showed good magnetism properties and provided promising MR imaging of tumors with excellent biocompatibility.

A Review on Metal- and Metal Oxide-Based Nanozymes: Properties, Mechanisms, and Applications

Since the ferromagnetic (Fe3O4) nanoparticles were firstly reported to exert enzyme-like activity in 2007, extensive research progress in nanozymes has been made with deep investigation of diverse nanozymes and rapid development of related nanotechnologies. As promising alternatives for natural enzymes, nanozymes have broadened the way toward clinical medicine, food safety, environmental monitoring, and chemical production. The past decade has witnessed the rapid development of metal- and metal oxide-based nanozymes owing to their remarkable physicochemical properties in parallel with low cost, high stability, and easy storage. It is widely known that the deep study of catalytic activities and mechanism sheds significant influence on the applications of nanozymes. This review digs into the characteristics and intrinsic properties of metal- and metal oxide-based nanozymes, especially emphasizing their catalytic mechanism and recent applications in biological analysis, relieving inflammation, antibacterial, and cancer therapy. We also conclude the present challenges and provide insights into the future research of nanozymes constituted of metal and metal oxide nanomaterials.

Design of hybrid biocatalysts by controlled heteroaggregation of manganese oxide and sulfate latex particles to combat reactive oxygen species

The preparation of an antioxidant hybrid material by controlled heteroaggregation of manganese oxide nanoparticles (MnO2 NPs) and sulfate-functionalized polystyrene latex (SL) beads was accomplished. Negatively charged MnO2 NPs were prepared by precipitation and initially functionalized with poly(diallyldimethylammonium chloride) (PDADMAC) polyelectrolyte to induce charge reversal allowing decoration of oppositely charged SL surfaces via simple mixing. The PDADMAC-functionalized MnO2 NPs (PMn) aggregated with the SL particles leading to the formation of negatively charged, neutral and positively charged (SPMn) composites. The charge neutralization resulted in rapidly aggregating dispersions, while stable samples were observed once the composites possessed sufficiently high negative and positive charge, below and above the charge neutralization point, respectively. The antioxidant assays revealed that SL served as a suitable substrate and that the PDADMAC functionalization and immobilization of MnO2 NPs did not compromise their catalase (CAT) and superoxide dismutase (SOD)-like activities, which were also maintained within a wide temperature range. The obtained SPMn composite is expected to be an excellent candidate as an antioxidant material for the efficient scavenging of reactive oxygen species at both laboratory and larger scales, even under harsh conditions, where natural antioxidants do not function.

The Application of Nucleic Acid Probe-Based Fluorescent Sensing and Imaging in Cancer Diagnosis and Therapy

It is well known that cancer incidence and death rates have been growing, but the development of cancer theranostics and therapeutics has been a challenging work. Recently, nucleic acid probe-based fluorescent sensing and imaging have achieved remarkable improvements in a variety of cancer management techniques, credited to their high sensitivity, good tolerance to interference, fast detection, and high versatility. Herein, nucleic acid probe-based fluorescent sensing and imaging are labeled with advanced fluorophores, which are essential for fast and sensitive detection of aberrant nucleic acids and other cancer-relevant molecules, consequently performing cancer early diagnosis and targeted treatment. In this review, we introduce the characteristics of nucleic acid probes, summarize the development of nucleic acid probe-based fluorescent sensing and imaging, and prominently elaborate their applications in cancer diagnosis and treatment. In discussion, some challenges and perspectives are elaborated in the field of nucleic acid probe-based fluorescent sensing and imaging.

Singlet-oxygen generated by a metal-organic framework for electrochemical biosensing

Enzyme-based electrochemical biosensors have been widely employed for analyte detection for several years. However, for wide application, there are many challenges to overcome, such as the sensitivity of the catalytic activity, and the reproducibility and stability of enzymes. In this work, an enzyme-free sensing strategy based on two-dimensional (2D) metal-organic frameworks (MOFs) as photosensitizers and singlet-oxygen (1O2) as the oxidant has been designed via photocatalysis and electrochemical analysis. To be specific, MOF sheets (Zn-ZnMOF) were prepared with Zn as the node and zinc(ii)tetraphenylporphyrin (TCPP(Zn)) as the ligand, which could generate 1O2 from air under light illumination, and sequentially the generated 1O2 could oxidize analytes to form their oxidation state which could be detected and reduced on the electrode, completing a redox cycle and amplifying electrochemical signals. Thanks to the morphology and superior quantum yield of 1O2 of the Zn-ZnMOF, this method could overcome the limitation of enzymes and afford selective detection, such as of hydroquinone with a detection limit of 0.8 μM in 0.1 M PBS (pH = 7.4). Furthermore, the method does not require additional reactive reagents but only with air and on/off light switching. Thirdly, the method detects the target without washing and enzyme-labelled. With these merits, this work provides a new platform for MOFs as photosensitizers for electrochemical sensors and further development of sensitive, selective, and stable electroanalytical devices for bio-application.

One-pot construction of acid phosphatase and hemin loaded multifunctional metal-organic framework nanosheets for ratiometric fluorescent arsenate sensing

Exploring high-performance sensors for toxic arsenic detection is highly desired because of its great threat to the environment. Herein, we report a ratiometric fluorescent biosensor based on acid phosphatase and hemin loaded multifunctional Zn-based metal-organic framework (ACP/hemin@Zn-MOF) for high-performance arsenate (As(Ⅴ)) sensing. ACP/hemin@Zn-MOF is constructed by self-assembly, where hemin exhibits peroxidase-like activity and 2-aminoterephthalic acid ligand endows ACP/hemin@Zn-MOF with an intrinsic fluorescence (452 nm). When ACP/hemin@Zn-MOF catalyzes the oxidation of o-phenylenediamine (OPD), fluorescent 2,3-diaminophenazine (DAP) with an emission signal (564 nm) is produced and weakens ACP/hemin@Zn-MOF intrinsic fluorescence (452 nm) due to inner filter effect; after adding ascorbic acid 2-phosphate (AAP), ACP can hydrolyze AAP and produce ascorbic acid, which competitively suppresses the oxidation of OPD, resulting in the decrease of DAP signal (564 nm) and the recovery of ACP/hemin@Zn-MOF signal (452 nm); when As(V) is added, it irreversibly poisons ACP against hydrolyzing AAP, and the fluorescence signal at 564 nm recovers and the one at 452 nm is suppressed again. High-sensitivity and high-selectivity detection of As(V) (3.33-300 μg L^-1) is realized, with a detection limit of 1.05 μg L^-1. The biosensor was also successfully employed to detect total arsenic and As(V) in rice.

A novel copper-based metal-organic framework as a peroxidase-mimicking enzyme and its glucose chemiluminescence sensing application

A novel copper-based metal-organic framework (Cu-MOF) with a large specific surface area and high porosity was synthesized. The Cu-MOF was a good peroxidase-mimicking enzyme and showed a high affinity with hydrogen peroxide in a wide pH range. The catalytic mechanism of Cu-MOF has been studied further based on comparing the characteristic of the Cu-MOF with some isomorphic MOFs. The catalytic activity center of Cu-MOF was determined to be the cupric ion rather than the ligand, which effectively promoted the generation of free radicals and electron transfer in the reaction progress. The high affinity of Cu-MOF to hydrogen peroxide proved it as an ideal catalyst for the chemiluminescence (CL) reaction involving hydrogen peroxide. Therefore, the CL method with high sensitivity could be established for detecting various substrates. A double-enzyme CL glucose biosensing platform was constructed for the determination of serum glucose employing the peroxidase-mimicking properties of Cu-MOF as well as glucose oxidase (GOx).

Metal-Organic Frameworks Enhance Biomimetic Cascade Catalysis for Biosensing

Multiple enzymes-induced biological cascade catalysis guides efficient and selective substrate transformations in vivo. The biomimetic cascade systems, as ingenious strategies for signal transduction and amplification, have a wide range of applications in biosensing. However, the fragile nature of enzymes greatly limits their wide applications. In this regard, metal-organic frameworks (MOFs) with porous structures, unique nano/microenvironments, and good biocompatibility have been skillfully used as carriers to immobilize enzymes for shielding them against hash surroundings and improving the catalytic efficiency. For another, nanomaterials with enzyme-like properties and brilliant stabilities (nanozymes), have been widely applied to ameliorate the low stability of the enzymes. Inheriting the abovementioned merits of MOFs, the performances of MOFs-immboilized nanozymes could be significantly enhanced. Furthermore, in addition to carriers, some MOFs can also serve as nanozymes, expanding their applications in cascade systems. Herein, recent advances in the fabrication of efficient MOFs-involving enzymes/nanozymes cascade systems and biosensing applications are highlighted. Integrating diversified signal output modes, including colorimetry, electrochemistry, fluorescence, chemiluminescence, and surface-enhanced Raman scattering, sensitive detection of various targets (including biological molecules, environmental pollutants, enzyme activities, and so on) are realized. Finally, challenges and opportunities about further constructions and applications of MOFs-involving cascade reaction systems are briefly put forward.

Recent advances in MOF-based nanoplatforms generating reactive species for chemodynamic therapy

Still today, cancer remains a threat to human health. Possible common treatments to cure this disease include chemotherapy (CT), radiotherapy (RT), photothermal therapy (PTT), and surgical resection, which give unreasonable results because of their limited efficiency and also lead to side-effects. Hence, different strategies are now being exploited to not only enhance the efficiency of these traditional therapeutic methods or treat the tumor cells but also curtail the side effects. A latest method with authentic proof of chemodynamic therapy (CDT) utilizing the Fenton reaction is now gaining importance. This approach, which is developed based on the high level of hydrogen peroxide (H2O2) in a tumor microenvironment (TME), can be used to catalyze the Fenton reaction to generate cancer cell-killing reactive oxygen species (ROS). The selection of materials is extremely important and nanomaterials offer the most likely method to facilitate CDT. Among various materials, metal-organic frameworks (MOFs) which have been extensively applied in medical areas are regarded as a promising material and possess potential for the next generation of nanotechnology. This review focuses on summarizing the use of MOFs in CDT and their synergetic therapeutics as well as the challenges, obstacles, and development.

Self-Assembled Multivalent Ag-SR Coordination Polymers with Phosphatase-Like Activity

We show herein the phosphatase-like catalytic activity of coordination polymers obtained after adding Ag⁺ -ions to thiols bearing hydrophobic alkyl chains terminated with a 1,4,7-triazacyclononane (TACN) group. The subsequent addition of Zn²⁺ -ions to the self-assembled polymers resulted in the formation of multivalent metal coordination polymers capable of catalysing the transphosphorylation of an RNA-model compound (2-hydroxypropyl-4-nitrophenyl phosphate, HPNPP) with high reactivity. Analysis of a series of metal ions showed that the highest catalytic activity was obtained when Ag⁺ -ions were used as the first metal ions to construct the backbone of the coordination polymer through interaction with the -SH group followed by Zn²⁺ -ions as the second metal ions complexed by the TACN-macrocycle. Furthermore, it was demonstrated that the catalytic activity could be modulated by changing the length of the hydrophobic alkyl chain.

Recent Advances in Nucleic Acid Modulation for Functional Nanozyme

Nanozymes have the potential to replace natural enzymes, so they are widely used in energy conversion technologies such as biosensors and signal transduction (converting biological signals of a target into optical, electrical, or metabolic signals). The participation of nucleic acids leads nanozymes to produce richer interface effects and gives energy conversion events more attractive characteristics, creating what are called “functional nanozymes”. Since different nanozymes have different internal structures and external morphological characteristics, functional modulation needs to be compatible with these properties, and attention needs to be paid to the influence of nucleic acids on nanozyme activity. In this review, “functional nanozymes” are divided into three categories, (nanozyme precursor ion)/ (nucleic acid) self-assembly, nanozyme-nucleic acid irreversible binding, and nanozyme-nucleic acid reversible binding, and the effects of nucleic acids on modulation principles are summarized. Then, the latest developments of nucleic acid-modulated nanozymes are reviewed in terms of their use in energy conversion technology, and their conversion mechanisms are critically discussed. Finally, we outline the advantages and limitations of “functional nanozymes” and discuss the future development prospects and challenges in this field.

Molecular Imprinting on Nanozymes for Sensing Applications

As part of the biomimetic enzyme field, nanomaterial-based artificial enzymes, or nanozymes, have been recognized as highly stable and low-cost alternatives to their natural counterparts. The discovery of enzyme-like activities in nanomaterials triggered a broad range of designs with various composition, size, and shape. An overview of the properties of nanozymes is given, including some examples of enzyme mimics for multiple biosensing approaches. The limitations of nanozymes regarding lack of selectivity and low catalytic efficiency may be surpassed by their easy surface modification, and it is possible to tune specific properties. From this perspective, molecularly imprinted polymers have been successfully combined with nanozymes as biomimetic receptors conferring selectivity and improving catalytic performance. Compelling works on constructing imprinted polymer layers on nanozymes to achieve enhanced catalytic efficiency and selective recognition, requisites for broad implementation in biosensing devices, are reviewed. Multimodal biomimetic enzyme-like biosensing platforms can offer additional advantages concerning responsiveness to different microenvironments and external stimuli. Ultimately, progress in biomimetic imprinted nanozymes may open new horizons in a wide range of biosensing applications.