Dynamic combinatorial libraries of a dimercapto-pillar[5]arene

We report the synthesis and dynamic covalent chemistry (DCvC) of an A1/A2-dimercapto-functionalized pillar[5]arene (Di-SH-P5). The introduction of thiol moieties into this macrocyclic host makes it an effective building block for making a dynamic combinatorial library (DCL), giving rise to a set of cyclic trimers with intriguing host-guest properties as the dominant constituents.

Anisotropic Compartmentalization of the Liquid-Liquid Interface using Dynamic Imine Chemistry

The liquid-liquid interface offers a fascinating avenue for generating hierarchical compartments. Herein, the dynamic imine chemistry is employed at the oil-water interface to investigate the effect of dynamic covalent bonds for modulating the droplet shape. The imine bond formation between oil-soluble aromatic aldehydes and water-soluble polyethyleneimine greatly stabilized the oil-water interface by substantially lowering the interfacial tension. The successful jamming of imine-mediated assemblies was observed when a compressive force was applied to the droplet. Thus, the anisotropic compartmentalization of the liquid-liquid interface was created, and it was later altered by changing the pH of the surrounding environment. Finally, a proof-of-concept demonstration of a pH-triggered cargo release across the interfacial membrane confirmed the feasibility of stimuli-responsive behavior of dynamic imine assemblies.

Tandem Imine Formation and Alkyne Metathesis Enabled by Catalyst Choice

Three-rung molecular ladder 8 was prepared in one pot via tandem imine condensation and alkyne metathesis. Catalyst VI is demonstrated to successfully engender the metathesis of imine-bearing substrate 7, while catalyst III does not. The susceptibility of catalyst VI to deactivation by hydrolysis and ligand exchange is demonstrated. Assembly and disassembly of ladder 8 in one pot were demonstrated in the presence and absence of a Lewis acid catalyst.

Imine- and Amine-Type Macrocycles Derived from Chiral Diamines and Aromatic Dialdehydes

The condensation of aromatic dialdehydes with chiral diamines, such as 1,2-trans-diaminocyclohexane, leads to various enantiopure or meso-type macrocyclic Schiff bases, including [2 + 2], [3 + 3], [4 + 4], [6 + 6] and [8 + 8] condensation products. Unlike most cases of macrocycle synthesis, the [3 + 3] macrocycles of this type are sometimes obtained in high yields by direct condensation without a metal template. Macrocycles of other sizes from this family can often be selectively obtained in high yields by a suitable choice of metal template, solvent, or chirality of the building blocks. In particular, the application of a cadmium(II) template results in the expansion of the [2 + 2] macrocycles into giant [6 + 6] and [8 + 8] macrocycles. These imine macrocycles can be reduced to the corresponding macrocyclic amines which can act as hosts for the binding of multiple cations or multiple anions.

Self-Healing Chitosan Hydrogels: Preparation and Rheological Characterization

The paper aims at the preparation of chitosan self-healing hydrogels, designed as carriers for local drug delivery by parenteral administration. To this aim, 30 hydrogels were prepared using chitosan and pyridoxal 5-phosphate (P5P), the active form of vitamin B6 as precursors, by varying the ratio of glucosamine units and aldehyde on the one hand and the water content on the other hand. The driving forces of hydrogelation were investigated by nuclear magnetic resonance (NMR), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction, and polarized light microscopy (POM) measurements. NMR technique was also used to investigate the stability of hydrogels over time, and their morphological particularities were assessed by scanning electron microscopy (SEM). Degradability of the hydrogels was studied in media of four different pH, and preliminary self-healing ability was visually established by injection through a syringe needle. In-depth rheological investigation was conducted in order to monitor the storage and loss moduli, linear viscoelastic regime, and structural recovery capacity. It was concluded that chitosan crosslinking with pyridoxal 5-phosphate is a suitable route to reach self-healing hydrogels with a good balance of mechanical properties/structural recovery, good stability over time, and degradability controlled by pH.

Toward in Silico Modeling of Dynamic Combinatorial Libraries

Dynamic combinatorial libraries (DCLs) display adaptive behavior, enabled by the reversible generation of their molecular constituents from building blocks, in response to external effectors, e.g., protein receptors. So far, chemoinformatics has not yet been used for the design of DCLs-which comprise a radically different set of challenges compared to classical library design. Here, we propose a chemoinformatic model for theoretically assessing the composition of DCLs in the presence and the absence of an effector. An imine-based DCL in interaction with the effector human carbonic anhydrase II (CA II) served as a case study. Support vector regression models for the imine formation constants and imine-CA II binding were derived from, respectively, a set of 276 imines synthesized and experimentally studied in this work and 4350 inhibitors of CA II from ChEMBL. These models predict constants for all DCL constituents, to feed software assessing equilibrium concentrations. They are publicly available on the dedicated website. Models rationally selected two amines and two aldehydes predicted to yield stable imines with high affinity for CA II and provided a virtual illustration on how effector affinity regulates DCL members.

Design, Synthesis and Characterization of Vitrimers with Low Topology Freezing Transition Temperature

Vitrimers are crosslinked polymeric materials that behave like fluids when heated, regulated by the kinetics of internal covalent bond-exchange that occurs rapidly at or above the topology freezing transition temperature (T_v) of the vitrimer, making these materials readily reprocessable and recyclable. We report two novel multiphase vitrimeric materials prepared by the cross-linking of two polymers, namely poly(triethylene glycol sebacate) and poly(2-hydroxyethyl acrylate), using zinc acetate or tin(II) 2-ethylhexanoate as catalysts, which exhibit significantly low T_v temperatures of 39 °C and 29 °C, respectively. The transesterification reactions allow rapid and pronounced stress relaxation at high temperatures, following the Arrhenius law. The lower T_v of these vitrimers could be attributable to the flexible long chains of these polymers and the significant excess of OH moieties present along the main chain of the polymer. The design of such multiphase vitrimers is not only useful for the practical application of vitrimers to reduce plastic waste but could also facilitate further development of functional polymer materials that can be reprocessed at low temperatures.

Access to ortho-Hydroxyphenyl Ketimines via Imine Anion-Mediated Smiles Rearrangement

We have achieved a facile access to N-(2-halophenyl)-2-hydroxyphenylimine derivatives via imine anion-mediated Smiles rearrangement. When 2-(2-halophenoxy)benzonitriles were treated with 1.2-1.4 equiv of organolithium reagents, nucleophilic addition to the nitrile group followed by Smiles rearrangement occurred to give various N-(2-halophenyl)-2-hydroxyphenylimine derivatives, which are sometimes difficult to synthesize by the conventional acid-promoted condensation reaction between carbonyl compounds and aniline derivatives, in good to excellent chemical yields (up to 91%).

A double-decker cage for allosteric encapsulation of ATP

In this work, we describe the preparation of double-decker cage [1-H₆]⁶⁺ comprising two binding pockets, each with three ammonium and three amide hydrogen bonding sites. This novel host possesses a high affinity for trapping two molecules of ATP in an allosteric fashion, with both experiments and theory suggesting the synergistic action of charged hydrogen bonds and π-π stacking in the encapsulation.

Dynamic reversible adhesives based on crosslinking network via Schiff base and Michael addition

It is of practical interest to obtain polymers with complex material properties in a simplified synthetic manner for a broader range of practical applications. In this work, we constructed a dynamic reversible adhesive based on branched polyamine (PA) and p-formylphenyl acrylate (FPA) by simultaneously performing Michael addition reaction and Schiff base reaction. Branched polyamines provide a large number of amino groups as reaction sites that can react with both carbon-carbon double bonds and aldehyde groups. This enables the branched polymeric adhesive system to have a large number of Schiff base bonds within it, an important property of Schiff base bonds is that they are dynamically reversible. This allows us to prepare adhesives with hyperbranched crosslinking networks and recycling properties, and we have verified that FPA-PA adhesives do not exhibit significant fatigue after multiple recycling through the gluing-destruction-gluing process. The resulting FPA-PA adhesives produce tough bonding on multi-substrates such as steel, aluminum, glass, PVC, PTFE, birch and moso bamboo, which exhibited by lap shear strength of 2.4 MPa, 1.7 MPa, 1.4 MPa, 1.3 MPa, 0.4 MPa, 1.6 MPa, and 1.8 MPa, respectively. The feasibility of the synthesis idea of simultaneous Michael addition reaction and Schiff base reaction was demonstrated, as well as the excellent performance and great application potential of FPA-PA adhesives to be recyclable on multi-substrates.

Rapid Stress Relaxation, Multistimuli-Responsive Elastomer Based on Dual-Dynamic Covalent Bonds and Aniline Trimer

Covalent adaptable networks (CANs) are an emerging kind of smart materials in which cross-links are reversible upon some stimuli and then provide malleability and a stimuli-responsive ability to the materials. There is a trend to endow CANs with multistimuli-responsive capabilities and rapid stress relaxation to pursue more advanced applications. To integrate these two features into one material, here, dual-dynamic covalent bonds (imines and boronic esters) and aniline trimer (ACAT) were incorporated into the styrene butadiene elastomer as dynamic cross-links. The obtained CANs were demonstrated with rapid stress relaxation and a relatively low activation energy of 36 ± 1 kJ mol^-1, resulting from the synergistic effect of dual-dynamic covalent bonds to rearrange the network at a faster rate than for either imines or boronic esters. Because of the dynamic nature of imines or boronic esters, the elastomer can be recycled upon heat. Moreover, the appearance and configuration of the elastomer could also be manipulated by pH and light because of the inclusion of ACAT. All in all, the coupled multistimuli-responsive behavior and rapid stress relaxation in one single elastomer would potentially be applicable for sensors and actuators with good recyclability.

Molecular Cavity for Catalysis and Formation of Metal Nanoparticles for Use in Catalysis

The employment of weak intermolecular interactions in supramolecular chemistry offers an alternative approach to project artificial chemical environments like the active sites of enzymes. Discrete molecular architectures with defined shapes and geometries have become a revolutionary field of research in recent years because of their intrinsic porosity and ease of synthesis using dynamic non-covalent/covalent interactions. Several porous molecular cages have been constructed from simple building blocks by self-assembly, which undergoes many self-correction processes to form the final architecture. These supramolecular systems have been developed to demonstrate numerous applications, such as guest stabilization, drug delivery, catalysis, smart materials, and many other related fields. In this respect, catalysis in confined nanospaces using such supramolecular cages has seen significant growth over the years. These porous discrete cages contain suitable apertures for easy intake of substrates and smooth release of products to exhibit exceptional catalytic efficacy. This review highlights recent advancements in catalytic activity influenced by the nanocavities of hydrogen-bonded cages, metal-ligand coordination cages, and dynamic or reversible covalently bonded organic cages in different solvent media. Synthetic strategies for these three types of supramolecular systems are discussed briefly and follow similar and simplistic approaches manifested by simple starting materials and benign conditions. These examples demonstrate the progress of various functionalized molecular cages for specific chemical transformations in aqueous and nonaqueous media. Finally, we discuss the enduring challenges related to porous cage compounds that need to be overcome for further developments in this field of work.

Novel Pyridinium Cross-Link Structures Derived from Glycolaldehyde and Glyoxal

Short-chained α-hydroxycarbonyl compounds such as glycolaldehyde (GA) and its oxidized counterpart glyoxal (GX) are known as potent glycating agents. Here, a novel fluorescent lysine-lysine cross-link 1-(5-amino-5-carboxypentyl)-3-(5-amino-5-carboxy-pentylamino)pyridinium salt (meta-DLP) was synthesized and its structure unequivocally proven by ¹H NMR, ¹³C-NMR attached proton test, and 2D NMR. Further characterization of chemical properties and mechanistic background was obtained in comparison to the known monovalent protein modification 2-ammonio-6-(3-oxidopyridinium-1-yl)hexanoate (OP-lysine). Identification and quantitation in various sugar incubations with N²-t-Boc-lysine revealed a novel alternative formation pathway for both advanced glycation end products (AGEs) by the interplay of both carbonyl compounds, GA and GX, which was confirmed by isotope labeling experiments. The concentration of pyridinium AGEs was about 1000-fold lower compared to the well-established N⁶-carboxymethyl lysine. However, pyridinium AGEs were shown to lead to the photosensitized generation of singlet oxygen in irradiation experiments, which was verified by the detection of 3,3'-(naphthalene-1,4-diyl)-dipropionate endoperoxide. Furthermore, meta-DLP was identified in hydrolyzed potato chip proteins by collision-induced dissociation mass spectrometry after HPLC enrichment.

Stimulus-responsive self-assembled prodrugs in cancer therapy

Small-molecule prodrugs have become the main toolbox to improve the unfavorable physicochemical properties of potential therapeutic compounds in contemporary anti-cancer drug development. Many approved small-molecule prodrugs, however, still face key challenges in their pharmacokinetic (PK) and pharmacodynamic (PD) properties, thus severely restricting their further clinical applications. Self-assembled prodrugs thus emerged as they could take advantage of key benefits in both prodrug design and nanomedicine, so as to maximize drug loading, reduce premature leakage, and improve PK/PD parameters and targeting ability. Notably, temporally and spatially controlled release of drugs at cancerous sites could be achieved by encoding various activable linkers that are sensitive to chemical or biological stimuli in the tumor microenvironment (TME). In this review, we have comprehensively summarized the recent progress made in the development of single/multiple-stimulus-responsive self-assembled prodrugs for mono- and combinatorial therapy. A special focus was placed on various prodrug conjugation strategies (polymer-drug conjugates, drug-drug conjugates, etc.) that facilitated the engineering of self-assembled prodrugs, and various linker chemistries that enabled selective controlled release of active drugs at tumor sites. Furthermore, some polymeric nano-prodrugs that entered clinical trials have also been elaborated here. Finally, we have discussed the bottlenecks in the field of prodrug nanoassembly and offered potential solutions to overcome them. We believe that this review will provide a comprehensive reference for the rational design of effective prodrug nanoassemblies that have clinic translation potential.

Self-Healing Systems in Silicon Anodes for Li-Ion Batteries

Self-healing is the capability of materials to repair themselves after the damage has occurred, usually through the interaction between molecules or chains. Physical and chemical processes are applied for the preparation of self-healing systems. There are different approaches for these systems, such as heterogeneous systems, shape memory effects, hydrogen bonding or covalent–bond interaction, diffusion, and flow dynamics. Self-healing mechanisms can occur in particular through heat and light exposure or through reconnection without a direct effect. The applications of these systems display an increasing trend in both the R&D and industry sectors. Moreover, self-healing systems and their energy storage applications are currently gaining great importance. This review aims to provide general information on recent developments in self-healing materials and their battery applications given the critical importance of self-healing systems for lithium-ion batteries (LIBs). In the first part of the review, an introduction about self-healing mechanisms and design strategies for self-healing materials is given. Then, selected important healing materials in the literature for the anodes of LIBs are mentioned in the second part. The results and future perspectives are stated in the conclusion section.

Integrating Boronic Esters and Anthracene into Covalent Adaptable Networks toward Stimuli-Responsive Elastomers

Stimuli-responsive polymer materials have a promising potential application in many areas. However, integrating multi-stimuli into one elastomer is still a challenge. Here, we utilized boronic esters and anthracene to prepare a cross-linked poly(styrene-butadiene-styrene) (SBS) which was endowed with responsiveness to three stimuli (light, heat, and alcohols). SBS was first functionalized with a certain amount of dihydroxyl groups via a thiol-ene "click" reaction between unsaturated double bonds in PB block and thioglycerol. Then, 9-anthraceneboronic acid was applied to form a cross-linked SBS network upon heat and ultraviolet radiation (λ = 365 nm). The prepared elastomer was demonstrated to be stimuli-responsive based on the dynamic nature of boronic esters and the reversible dimerization of anthracene. In addition, the mechanical properties of the elastomer could be regulated continuously owing to the stimulus responsiveness to ultraviolet or heat.

Controlled Synthesis of Mesoporous π-Conjugated Polymer Nanoarchitectures as Anode for Lithium-ions Battery

Conjugated polymers possess better electron conductivity due to large π-electron conjugated configuration endowing them significant scientific and technological interest. However, the obvious deficiency of active-site underutilization impairs their electrochemical performance. Therefore, designing and engineering π-conjugated polymers with rich redox functional groups and mesoporous architectures could offer new opportunities for them in these emerging applications and further expand their application scopes. Herein, a series of 1, 3, 5-tris(4-aminophenyl) benzene (TAPB)-based π-conjugated mesoporous polymers (π-CMPs) are constructed by one-pot emulsion-induced interface assembly strategy. Furthermore, co-induced in-situ polymerization on 2D interfaces by emulsion and micelle is explored, which delivered sandwiched 2D mesoporous π-CMPs coated graphene oxides (GO@mPTAPB). Benefiting from specific redox-active functional groups, excellent electron conductivity and 2D mesoporous conjugated framework, GO@mPTAPB exhibits high capability of accommodating Li⁺ anions (up to 382 mAh g^-1 at 0.2 A g^-1 ) and outstanding electrochemical stability (87.6% capacity retention after 1000 cycles). The ex-situ Raman and impedance spectrum are further applied to reveal the high reversibility of GO@mPTAPB. This work will greatly promote the development of advanced π-CMPs-based organic anodes towards energy storage devices. This article is protected by copyright. All rights reserved.

Controlling chirality in the synthesis of 4 + 4 diastereomeric amine macrocycles derived from trans-1,2-diaminocyclopentane and 2,6-diformylpyridine

A few suitably long dialdehyde and primary diamine building blocks of a predetermined chirality have been designed and synthesized to enable controlled and efficient synthesis of all six possible diastereomers of 4 + 4 macrocyclic amine derived from trans-1,2-diaminocyclopentane (DACP) and 2,6-diformypyridine (DFP) units. Although two out of six diastereomers have been reported recently, their synthesis presented here is more direct and occurs with an improved yield. This family of 4 + 4 macrocycles contains one pair of homochiral enantiomers of identical RRRRRRRR and SSSSSSSS configurations of DACP units, two different meso forms (meso I of alternating RRSSRRSS and meso II of neighboring RRRRSSSS configuration of DACP moieties) as well as one pair of heterochiral enantiomers, where configuration of one diamine fragment is opposite to the other three diamine parts, RRRRRRSS and SSSSSSRR, respectively. The structures of each type of macrocycle in solid state have been confirmed by single crystal analyses of a macrocyclic amine in its suitable protonated form. The different symmetry of each type of macrocycle in solutions has been proved by ¹H and ¹³C NMR spectra of their hydrochloride derivatives. The chiral nature of two different pairs of optically active enantiomers has been established by circular dichroism spectra. These chiral 4 + 4 diastereomeric macrocycles are receptors for chiral guests and recognize in solution 10-camphorsulfonic acid as well as chiral tartaric acid.

A light-fuelled nanoratchet shifts a coupled chemical equilibrium

Biological molecular machines enable chemical transformations, assembly, replication and motility, but most distinctively drive chemical systems out of-equilibrium to sustain life^1,2. In such processes, nanometre-sized machines produce molecular energy carriers by driving endergonic equilibrium reactions. However, transforming the work performed by artificial nanomachines^3-5 into chemical energy remains highly challenging. Here, we report a light-fuelled small-molecule ratchet capable of driving a coupled chemical equilibrium energetically uphill. By bridging two imine^6-9 macrocycles with a molecular motor^10,11, the machine forms crossings and consequently adopts several distinct topologies by either a thermal (temporary bond-dissociation) or photochemical (unidirectional rotation) pathway. While the former will relax the machine towards the global energetic minimum, the latter increases the number of crossings in the system above the equilibrium value. Our approach provides a blueprint for coupling continuous mechanical motion performed by a molecular machine with a chemical transformation to reach an out-of-equilibrium state.

Recapitulating dynamic ECM ligand presentation at biomaterial interfaces: Molecular strategies and biomedical prospects

The extracellular matrix (ECM) provides not only physical support for the tissue structural integrity, but also dynamic biochemical cues capable of regulating diverse cell behaviors and functions. Biomaterial surfaces with dynamic ligand presentation are capable of mimicking the dynamic biochemical cues of ECM, showing ECM-like functions to modulate cell behaviors. This review paper described an overview of present dynamic biomaterial interfaces by focusing on currently developed molecular strategies for dynamic ligand presentation. The paradigmatic examples for each strategy were separately discussed. In addition, the regulation of some typical cell behaviors on these dynamic biointerfaces including cell adhesion, macrophage polarization, and stem cell differentiation, and their potential applications in pathogenic cell isolation, single cell analysis, and tissue engineering are highlighted. We hope it would not only clarify a clear background of this field, but also inspire to exploit novel molecular strategies and more applications to match the increasing demand of manipulating complex cellular processes in biomedicine.

Designed from Biobased for Recycling: Imine-Based Covalent Adaptable Networks

Turning thermosets into fully sustainable materials requires utilization of biobased raw materials and design for easy recyclability. Here, dynamic covalent chemistry for fabrication of covalent adaptable networks (CANs) could be an enabling tool. CAN thermosets ideally combine the positive material properties of thermosets with thermal recyclability of linear thermoplastics. Among the dynamic covalent bonds, imine bond, also called Schiff base, can participate in both dissociative and associative pathways. This induces potential for chemical recyclability, thermal reprocessability and self-healing. This review presents an overview of the current research front of biobased thermosets fabricated by Schiff base chemistry. The discussed materials are categorized on the basis of the employed biobased components. The chemical approaches for the synthesis and curing of the resins, as well as the resulting properties and recyclability of the obtained thermosets are described and discussed. Finally, challenges and future perspectives are briefly summarized. This article is protected by copyright. All rights reserved.

Controlled, Sunlight-Driven Reversible Cycloaddition of Multiple Singlet Oxygen Molecules to Anthracene-Containing Trianglimine Macrocycles

Controlled release of singlet oxygen is of interest not only to chemists, but also to biologists and medics involved in cancer therapy. Two chiral polyaza macrocyclic compounds and their corresponding endoperoxides have been synthesized. These peroxides exhibit high temperature stability, up to 80 °C. Detailed studies on their structure, including X-ray analysis as well as NMR, UV-VIS ECD spectroscopy and theoretical calculations, combined with photochemical measurements indicate that their high stability is related to the arrangement of oxygen atoms in a conformationally stable macrocyclic ring. Despite the change of carbon hybridization from sp2 to sp3 at the 9 and 10 positions of the anthracene units, the macrocyclic skeleton of the obtained compounds does not change its conformation. The obtained endoperoxides can be formed and release singlet oxygen by irradiation with UV light of 365 and 275 nm, respectively. Release of the oxygen does not degrade the macrocyclic structure.

Supramolecular Adhesive Hydrogels for Tissue Engineering Applications

Tissue engineering is a promising and revolutionary strategy to treat patients who suffer the loss or failure of an organ or tissue, with the aim to restore the dysfunctional tissues and enhance life expectancy. Supramolecular adhesive hydrogels are emerging as appealing materials for tissue engineering applications owing to their favorable attributes such as tailorable structure, inherent flexibility, excellent biocompatibility, near-physiological environment, dynamic mechanical strength, and particularly attractive self-adhesiveness. In this review, the key design principles and various supramolecular strategies to construct adhesive hydrogels are comprehensively summarized. Thereafter, the recent research progress regarding their tissue engineering applications, including primarily dermal tissue repair, muscle tissue repair, bone tissue repair, neural tissue repair, vascular tissue repair, oral tissue repair, corneal tissue repair, cardiac tissue repair, fetal membrane repair, hepatic tissue repair, and gastric tissue repair, is systematically highlighted. Finally, the scientific challenges and the remaining opportunities are underlined to show a full picture of the supramolecular adhesive hydrogels. This review is expected to offer comparative views and critical insights to inspire more advanced studies on supramolecular adhesive hydrogels and pave the way for different fields even beyond tissue engineering applications.

Synthesis and characterization of new bio-based poly(acylhydrazone) vanillin vitrimers

New poly(acylhydrazone) vitrimeric-type materials derived from vanillin have been studied.

Photoswitchable block copolymers based on main chain α-bisimines

We introduce linear diblock copolymers (BCPs) consisting of readily accessable and photoswitchable α-bisimine units in the polymer backbone.

Connecting the Dynamics and Reactivity of Arylboronic Acids to Emergent and Stimuli-Responsive Material Properties

Over the past two decades, arylboronic acid-functionalized biomaterials have been used in a variety of sensing and stimuli-responsive scaffolds. Their diverse applications result from the diverse reactivity of arylboronic acids,...

Dynamic Covalent Chemistry Constrained Diphenylethenes: Control over Reactivity and Luminescence in both Solution and Solid State

Diarylethenes (DAEs) are an important class of building blocks in chemistry and materials science, and hence, their modulation and functionalization are of critical significance. Here we demonstrate a general strategy...

Light-Driven Molecular Motors Embedded in Covalent Organic Frameworks

The incorporation of molecular machines into the backbone of porous framework structures will facilitate nano actuation, enhanced molecular transport, and other out-of-equilibrium host-guest phenomena in well-defined 3D solid materials. In...

Selective Encapsulation and Unusual Stabilization of cis-Isomers by a Spherical Polyaromatic Cavity

To explore new cavity functions, we herein employed  cis-trans   stereoisomers   with a N=N, C=C, or C=N unit as guest indicators for a polyaromatic capsule. Thanks to the rigid, spherical cavity with a diameter of ~1 nm, azobenzene and stilbene derivatives are quantitatively encapsulated by the capsule with 100%  cis -selectivity in water. The isomerization of the  cis -azo compound is suppressed against heat and light in the cavity, due to the confinement effect. Furthermore,  C,N -diphenyl imine derivatives are quantitatively encapsulated by the capsule in water and adopt an otherwise unstable  cis -form. The polyaromatic cavity suppresses the hydrolysis of the imines in water, even at elevated temperature, due to the shielding effect. Accordingly, the properties of the  cis-trans   isomers  could be largely altered through supramolecular manipulation.

Tetrahedron-Based Constitutional Dynamic Network for COVID-19 or Other Coronaviruses Diagnostics and Its Logic Gate Applications

Considering the large-scale outbreak of the coronavirus, it is essential to develop a versatile sensing system for different coronaviruses diagnostics, such as COVID-19, severe acute respiratory syndrome-related coronavirus (SARS-CoV), and bat SARS-like coronavirus (Bat-SL-CoVZC45). In this work, a tetrahedron-based constitutional dynamic network was built as the sensing platform for coronavirus detection. Four different DNA probes were used to construct the tetrahedron structure. DNAzyme and the fluorophore modified substrate strand were used to generate different fluorescence signals, which can be used to distinguish different coronaviruses. The coronavirus biosensor shows a high sensitivity for COVID-19, Bat-SL-CoVZC45, and SARS-CoV detection, with detection limits of 2.5, 3.1, and 2.9 fM, respectively. Also, the platform is robust, and the possible interference from clinical samples was negligible. Using different coronaviruses as inputs, we have fabricated several concatenated logic gates, such as "AND-OR", "INHIBIT-AND", "AND-AND-AND", and "AND-INHIBIT". Importantly, our logic system can also be used to identify SARS-CoV-2 Delta and Lambda variants in the logic operations. Due to the unique advantages of high sensitivity and selectivity, multiple logic biocomputing capabilities, and multireadout mode, this flexible sensing system provides a versatile sensing strategy for intelligent diagnostics of different coronaviruses with low false-negative rates.

Three-Component Dynamic Covalent Chemistry: From Janus Small Molecules to Functional Polymers

A new multicomponent reaction involving 2-hydroxybenzaldehyde, amine, and 2-mercaptobenzaldehyde (HAM reaction) has been developed and applied to multicomponent polymerization and controlled radical polymerization for the construction of random and block copolymers. This chemistry features mild reaction conditions, high yield, simple isolation, and water as the only byproduct. With the advantages of the distinct nucleophilicity of thiol and hydroxyl groups, the chemistry could be used for stepwise labeling and modifications on primary amines. The Janus chemical joint formed from this reaction exhibits degradability in buffers and generates the corresponding starting reagents, allowing amine release. Interestingly, the chemical joint exhibits thermally activated reversibility with water as the catalyst. This multicomponent dynamic covalent feature has been applied to the metamorphosis of random and block copolymers, generating polymers with diverse architectures. This chemistry is expected to be broadly applicable to synthetic polymer chemistry and materials science.

Light-Induced Formation/Scission of C-N, C-O, and C-S Bonds Enables Switchable Stability/Degradability in Covalent Systems

The manipulation of covalent bonds could be directed toward degradable, recyclable, and sustainable materials. However, there is an intrinsic conflict between properties of stability and degradability. Here we report light-controlled formation/scission of three types of covalent bonds (C-N, C-O, and C-S) through photoswitching between equilibrium and nonequilibrium states of dynamic covalent systems, achieving dual benefits of photoaddressable stability and cleavability. The photocyclization of dithienylethene fused aldehyde ring-chain tautomers turns on the reactivity, incorporating/releasing amines, alcohols, and thiols reversibly with high efficiency, respectively. Upon photocycloreversion the system is shifted to kinetically locked out-of-equilibrium form, enabling remarkable robustness of covalent assemblies. Reaction coupling allows remote and directional control of a diverse range of equilibria and further broadens the scope. Through locking and unlocking covalent linkages with light when needed, the utility is demonstrated with capture/release of bioactive molecules, modification of surfaces, and creation of polymers exhibiting tailored stability and degradability/recyclability. The versatile toolbox for photoswitchable dynamic covalent reactions to toggle matters on and off should be appealing to many endeavors.