Catalytic amide formation from non-activated carboxylic acids and amines

Nickel-catalyzed reductive aminocarbonylation of vinyl triflates with nitro compounds for the synthesis of α,β-unsaturated amides

A nickel-catalyzed reductive aminocarbonylation reaction for the synthesis of α,β-unsaturated amides has been described.

Fe-mediated synthesis of N-aryl amides from nitroarenes and acyl chlorides

Amides are prevalent in nature and valuable functional compounds in agrochemical, pharmaceutical, and materials industries. In this work, we developed a selective and mild method for the synthesis of N-aryl amides. Starting from commercially available nitroarenes and acyl halides, N-aryl amides with good yields can be obtained in water. Especially in the process of transformation, Fe dust is the only reductant and additive, and the reaction can be easily performed on a large scale.

Amides are prevalent in nature and valuable functional compounds in agrochemical, pharmaceutical, and materials industries.

Aerobic oxidation of primary amines to amides catalyzed by an annulated mesoionic carbene (MIC) stabilized Ru complex

A Ru complex, stabilized by an annulated mesoionic carbene ligand, catalyzes the aerobic oxidation of a host of primary amines to amides in high yields and excellent selectivity. Kinetics, Hammett and DFT studies provide mechanistic insight.

Silicon compounds as stoichiometric coupling reagents for direct amidation

Despite being one of the most frequently carried out chemical reactions in industry, there is currently no amidation protocol that is regarded as safe, high yielding, environmentally friendly and inexpensive. The direct amidation of a carboxylic acid with an amine is viewed as an inherently good solution for developing such a protocol. Since the 1960s, there has been a gradual development in the use of silicon reagents for direct amidation. This review covers the methods published to April 2021 for silicon reagent mediated direct amidation of a carboxylic acid with an amine. This review also covers the use of polymeric SiO2 to promote direct amidation.

Organocatalytic Control over a Fuel-Driven Transient-Esterification Network*

Signal transduction in living systems is the conversion of information into a chemical change, and is the principal process by which cells communicate. In nature, these functions are encoded in non-equilibrium (bio)chemical reaction networks (CRNs) controlled by enzymes. However, man-made catalytically controlled networks are rare. We incorporated catalysis into an artificial fuel-driven out-of-equilibrium CRN, where the forward (ester formation) and backward (ester hydrolysis) reactions are controlled by varying the ratio of two organocatalysts: pyridine and imidazole. This catalytic regulation enables full control over ester yield and lifetime. This fuel-driven strategy was expanded to a responsive polymer system, where transient polymer conformation and aggregation are controlled through fuel and catalyst levels. Altogether, we show that organocatalysis can be used to control a man-made fuel-driven system and induce a change in a macromolecular superstructure, as in natural non-equilibrium systems.

Synthesis of Weinreb amides using diboronic acid anhydride-catalyzed dehydrative amidation of carboxylic acids

The first successful example of the direct synthesis of Weinreb amides using catalytic hydroxy-directed dehydrative amidation of carboxylic acids using the diboronic acid anhydride catalyst is described. The methodology is applicable to the concise syntheses of eight α-hydroxyketone natural products, namely, sattabacin, 4-hydroxy sattabacin, kurasoins A and B, soraphinols A and B, and circumcins B and C.

Grafting Activated Graphene Oxide Nanosheets onto Ultrafiltration Membranes Using Polydopamine to Enhance Antifouling Properties

Graphene oxide (GO) nanosheets are negatively charged and exhibit excellent antifouling properties. However, their hydrophilicity makes it challenging for their grafting onto membrane surfaces to improve antifouling properties for long-term underwater operation. Herein, we demonstrate a versatile approach to covalently graft GO onto ultrafiltration membrane surfaces in aqueous solutions at ≈22 °C. The membrane surface is first primed using dopamine and then reacted with activated GO (aGO) containing amine-reactive esters. The aGO grafting improves the membrane surface hydrophilicity without decreasing water permeance. When the membranes are challenged with 1.0 g/L sodium alginate in a constant-flux crossflow system, the aGO grafting increases the critical flux by 20% and reduces the fouling rate by 63% compared with the pristine membrane. The modified membranes demonstrate stability for 48 h operation and interval cleanings using NaOH solutions.

Tandem Photoredox Catalysis: Enabling Carbonylative Amidation of Aryl and Alkylhalides

We report a new visible-light-mediated carbonylative amidation of aryl, heteroaryl, and alkyl halides. A tandem catalytic cycle of [Ir(ppy)₂ (dtb-bpy)]⁺ generates a potent iridium photoreductant through a second catalytic cycle in the presence of DIPEA, which productively engages aryl bromides, iodides, and even chlorides as well as primary, secondary, and tertiary alkyl iodides. The versatile in situ generated catalyst is compatible with aliphatic and aromatic amines, shows high functional-group tolerance, and enables the late-stage amidation of complex natural products.

Esterification of Tertiary Amides: Remarkable Additive Effects of Potassium Alkoxides for Generating Hetero Manganese-Potassium Dinuclear Active Species

A catalyst system of mononuclear manganese precursor 3 combined with potassium alkoxide served as a superior catalyst compared with our previously reported manganese homodinuclear catalyst 2 a for esterification of not only tertiary aryl amides, but also tertiary aliphatic amides. On the basis of stoichiometric reactions of 3 and potassium alkoxide salt, kinetic studies, and density functional theory (DFT) calculations, we clarified a plausible reaction mechanism in which in situ generated manganese-potassium heterodinuclear species cooperatively activates the carbonyl moiety of the amide and the OH moiety of the alcohols. We also revealed details of the reaction mechanism of our previous manganese homodinuclear system 2 a, and we found that the activation free energy (ΔG≠ ) for the manganese-potassium heterodinuclear complex catalyzed esterification of amides is lower than that for the manganese homodinuclear system, which was consistent with the experimental results. We further applied our catalyst system to deprotect the acetyl moiety of primary and secondary amines.

Facile access to N-formyl imide as an N-formylating agent for the direct synthesis of N-formamides, benzimidazoles and quinazolinones

N-Formamide synthesis using N-formyl imide with primary and secondary amines with catalytic amounts of p-toluenesulfonic acid monohydrate (TsOH·H₂O) is described. This reaction is performed in water without the use of surfactants. Moreover, N-formyl imide is efficiently synthesized using acylamidines with TsOH·H₂O in water. In addition, N-formyl imide was successfully used as a carbonyl source in the synthesis of benzimidazole and quinazolinone derivatives. Notable features of N-formylation of amines by using N-formyl imide include operational simplicity, oxidant- and metal-free conditions, structurally diverse products, and easy applicability to gram-scale operation.

Fast Amide Couplings in Water: Extraction, Column Chromatography, and Crystallization Not Required

In the micelle of PS-750-M, the presence of 3° amides from the surfactant proline linker mimics dimethylformamide, dimethylacetamide, and N-methyl-2-pyrrolidone. The resultant micellar properties enable extremely fast amide couplings mediated by 1-ethyl-3-(3-(dimethylamino)propyl)carbodiimide (without hydroxybenzotriazole), rather than expensive and specialized coupling agents. Conditions have been developed wherein products precipitate, and isolation by filtration completely avoids the use of organic solvent. This methodology is scalable and avoids product epimerization.

Direct synthesis of amides from nonactivated carboxylic acids using urea as nitrogen source and Mg(NO3)2 or imidazole as catalysts

A new method for the direct synthesis of primary and secondary amides from carboxylic acids is described using Mg(NO3)2·6H2O or imidazole as a low-cost and readily available catalyst, and urea as a stable, and easy to manipulate nitrogen source. This methodology is particularly useful for the direct synthesis of primary and methyl amides avoiding the use of ammonia and methylamine gas which can be tedious to manipulate. Furthermore, the transformation does not require the employment of coupling or activating agents which are commonly required.

An Efficient Greener Approach for N-Acylation of Amines in Water Using Benzotriazole Chemistry

A straightforward, mild and cost-efficient synthesis of various arylamides in water was accomplished using versatile benzotriazole chemistry. Acylation of various amines was achieved in water at room temperature as well as under microwave irradiation. The developed protocol unfolds the synthesis of amino acid aryl amides, drug conjugates and benzimidazoles. The environmentally friendly synthesis, short reaction time, simple workup, high yields, mild conditions and free of racemization are the key advantages of this protocol.

Microwave-Assisted Catalytic Method for a Green Synthesis of Amides Directly from Amines and Carboxylic Acids

Amide bonds are among the most interesting and abundant molecules of life and products of the chemical pharmaceutical industry. In this work, we describe a method of the direct synthesis of amides from carboxylic acids and amines under solvent-free conditions using minute quantities of ceric ammonium nitrate (CAN) as a catalyst. The reactions are carried out in an open microwave reactor and allow the corresponding amides to be obtained in a fast and effective manner when compared to other procedures of the direct synthesis of amides from acids and amines reported so far in the literature. The amide product isolation procedure is simple, environmentally friendly, and is performed with no need for chromatographic purification of secondary amides due to high yields. In this report, primary amines were used in most examples. However, the developed procedure seems to be applicable for secondary amines as well. The methodology produces a limited amount of wastes, and a catalyst can be easily separated. This highly efficient, robust, rapid, solvent-free, and additional reagent-free method provides a major advancement in the development of an ideal green protocol for amide bond formation.

NiFe2O4@SiO2 @amino Glucose Magnetic Nanoparticle under Solvent-free Condition: A New, mild, Simple and Effective Avenue for the Synthesis of Quinazolinone, Imidazo[1,2-a]Pyrimidinone and Novel Derivatives of Amides

BACKGROUND

Imidazo[1,2-a]pyrimidinone, quinazolinone and amide derivatives have attracted a lot of interest because of their broad scope of biological and pharmacological activities. There are a lot of methods reported in the literature for their synthesis. Therefore, we became interested in developing a convenient synthetic method for the preparation of imidazoquinazolinone and amide derivatives.

OBJECTIVE

NiFe2O4@SiO2 @glucose amine were synthesized, characterized and have been used for the green, effective and mild multicomponent synthesis of quinazolinones, benzoimidazo[1,2-a]pyrimidinones and amides under solvent-free conditions in short reaction times and excellent yields. To expand of the scope of this avenue, multicomponent synthesis of mono and bis novel amides was tested for the first time. All of the products were characterized by mp, FT-IR, NMR and elemental analysis.

METHODS

Aldehyde (1mmol), 2-amino benzimidazole (1 mmol), dimedone (1mmol) or indane-1,3-dione (1 mmol) for the synthesis of quinazoline or imidazopyrimidinones and arene (1mmol), anhydride (1mmol), 2- aminobenzimidazole (1mmol) for the synthesis of amides in the nanocatalyst NiFe2O4@SiO2@glucose amine (0.15mol%: 0.05g) were stirred by a magnet for the required reaction time. After completion of the reaction, as indicated by TLC, the products were collected and recrystallized from ethanol if necessary.

RESULTS

We present a novel avenue for the synthesis of benzimidazo[1,2-a] pyrimidinones, quinazolinones and amides in the presence of NiFe2O4@SiO2@glucose amine under solvent-free conditions.

CONCLUSION

In conclusion, we developed NiFe2O4@SiO2 @glucose amine-catalysed multicomponent synthesis of quinazolinones and imidazo[1,2-a]pyrimidinones using the reaction of benzaldehyde, dimedone or indane-dione and 2-aminobenzimidazole and multicomponent synthesis of amides using arenes, cyclic anhydrides and 2-aminobenzimidazole by a solvent-free technique. This method proves to be a robust and innovative approach for the synthesis of a biologically important structure. The operational simplicity, the excellent yields of products, ease of separation and recyclability of the magnetic catalyst, waste reduction and high selectivity are the main advantages of this method. Furthermore, this new avenue is cheap and environmentally benign.

Fatty Acid Amides Synthesized from Andiroba Oil (Carapa guianensis Aublet.) Exhibit Anticonvulsant Action with Modulation on GABA-A Receptor in Mice: A Putative Therapeutic Option

Epilepsy is a chronic neurological disease characterized by excessive neuronal activity leading to seizure; about 30% of affected patients suffer from the refractory and pharmacoresistant form of the disease. The anticonvulsant drugs currently used for seizure control are associated with adverse reactions, making it important to search for more effective drugs with fewer adverse reactions. There is increasing evidence that endocannabinoids can pharmacologically modulate action against seizure and antiepileptic disorders. Therefore, the objective of this study is to investigate the anticonvulsant effects of fatty acid amides (FAAs) in a pentylenetetrazole (PTZ)-induced seizure model in mice. FAAs (FAA1 and FAA2) are obtained from Carapa guianensis oil by biocatalysis and are characterized by Fourier Transform Infrared Analysis (FT-IR) and Gas Chromatography-Mass Spectrometry (GC-MS). Only FAA1 is effective in controlling the increased latency time of the first myoclonic jerk and in significantly decreasing the total duration of tonic-clonic seizures relative to the pentylenetetrazol model. Also, electrocortical alterations produced by pentylenetetrazol are reduced when treated by FAA1 that subsequently decreased wave amplitude and energy in Beta rhythm. The anticonvulsant effects of FAA1 are reversed by flumazenil, a benzodiazepine antagonist on Gamma-Aminobutyric Acid-A (GABA-A) receptors, indicating a mode of action via the benzodiazepine site of these receptors. To conclude, the FAA obtained from C. guianensis oil is promising against PTZ-induced seizures.

Biomimetic and bioinspired molecular electrets. How to make them and why does the established peptide chemistry not always work?

“Biomimetic” and “bioinspired” define different aspects of the impacts that biology exerts on science and engineering. Biomimicking improves the understanding of how living systems work, and builds tools for bioinspired endeavors. Biological inspiration takes ideas from biology and implements them in unorthodox manners, exceeding what nature offers. Molecular electrets, i.e. systems with ordered electric dipoles, are key for advancing charge-transfer (CT) science and engineering. Protein helices and their biomimetic analogues, based on synthetic polypeptides, are the best-known molecular electrets. The inability of native polypeptide backbones to efficiently mediate long-range CT, however, limits their utility. Bioinspired molecular electrets based on anthranilamides can overcome the limitations of their biological and biomimetic counterparts. Polypeptide helices are easy to synthesize using established automated protocols. These protocols, however, fail to produce even short anthranilamide oligomers. For making anthranilamides, the residues are introduced as their nitrobenzoic-acid derivatives, and the oligomers are built from their C- to their N-termini via amide-coupling and nitro-reduction steps. The stringent requirements for these reduction and coupling steps pose non-trivial challenges, such as high selectivity, quantitative yields, and fast completion under mild conditions. Addressing these challenges will provide access to bioinspired molecular electrets essential for organic electronics and energy conversion.

Mechanistic Insights into La-Catalyzed Amidation of Aldehyde with Amine

A new mechanism of La-catalyzed amidation of N-methylbenzylamine with p-chlorobenzaldehyde has been computationally proposed, where L₂La[NR₁R₂] (I) rather than previously proposed L₂La[OCHRNR₁R₂] (II) is the catalytically active species. Interestingly, the side-product alcohol acting as a proton relay to reduce reaction energy barrier could participate in the regeneration of I. Besides, DFT calculations suggest that an addition of alcohol additive into the initial reaction system could accelerate the reaction, which has been further verified by experiments.

Clickable coupling of carboxylic acids and amines at room temperature mediated by SO2F2: a significant breakthrough for the construction of amides and peptide linkages

The construction of amide bonds and peptide linkages is one of the most fundamental transformations in all life processes and organic synthesis. The synthesis of structurally ubiquitous amide motifs is essential in the assembly of numerous important molecules such as peptides, proteins, alkaloids, pharmaceutical agents, polymers, ligands and agrochemicals. A method of SO2F2-mediated direct clickable coupling of carboxylic acids with amines was developed for the synthesis of a broad scope of amides in a simple, mild, highly efficient, robust and practical manner (>110 examples, >90% yields in most cases). The direct click reactions of acids and amines on a gram scale are also demonstrated using an extremely easy work-up and purification process of washing with 1 M aqueous HCl to provide the desired amides in greater than 99% purity and excellent yields.

Ti-superoxide catalyzed oxidative amidation of aldehydes with saccharin as nitrogen source: synthesis of primary amides

A new heterogeneous catalytic system (Ti-superoxide/saccharin/TBHP) has been developed that efficiently catalyzes oxidative amidation of aldehydes to produce various primary amides. The protocol employs saccharin as amine source and was found to tolerate a wide range of substrates with different functional groups. Moderate to excellent yields, catalyst reusability and operational simplicity are the main highlights. A possible mechanism and the role of the catalyst in oxidative amidation have also been discussed.

Transamidation via C–N bond cleavage of amides and tertiary amines

Double C–N bond cleavage of amides and tertiary amines afforded the transamidated products in good yields.

Detection of humic acid in water using flat-sheet and folded-rod viscous alkaline glucose syrups

Interaction of the alkaline glucose solution with humic acid.