Hierarchically porous metal hydroxide/metal-organic framework composite nanoarchitectures as broad-spectrum adsorbents for toxic chemical filtration

We demonstrate that the hierarchically porous metal hydroxide/metal-organic framework composite nanoarchitectures exhibit broad-spectrum removal activity for three chemically distinct toxic gases, viz. acid gases, base gases, and nitrogen oxides. A facile and general in-situ hydrolysis strategy combined with gentle ambient pressure drying (APD) was utilized to integrate both Zr(OH)₄ and Ti(OH)₄ with the amino-functionalized MOF-808 xerogel (G808-NH₂). The M(OH)₄/G808-NH₂ xerogel composites manifested 3D crystalline porous networks and substantially hierarchical porosity, with controllable amounts of amorphous M(OH)₄ nanoparticles residing at the edge of xerogel particles. Microbreakthrough tests were performed under both dry and moist conditions to evaluate the filtration capabilities of the composites against three representative compounds: SO₂, NH₃, and NO₂. Compared with the pristine G808-NH₂ xerogel, the incorporation of M(OH)₄ effectively enhanced the broad-spectrum toxic chemical mitigation ability of the material, with the highest SO₂, NH₃, and NO₂ breakthrough uptake reaching 74.5, 55.3, and 394.0 mg/g, respectively. Post-breakthrough characterization confirmed the abundant M-OH groups with diverse binding configurations, alongside the unsaturated M (IV) centers on the surface of M(OH)₄ provided extra adsorption sites for irreversible toxic chemical capture besides Van der Waals driven physisorption. The ability to achieve high-capacity adsorption and strong retention for multiple contaminants is of great significance for real-world filtration applications.

Hydrolytic cleavage of nerve agent simulants by gold nanozymes

Although banned by the Chemical Weapons Convention, organophosphorus nerve agents are still available and have been used in regional wars, terroristic attacks or for other crtaiminal purposes. Their degradation is of primary importance for the severe toxicity of these compounds. Here we report that gold nanoparticles passivated with thiolated molecules bearing 1,3,7-triazacyclononane and 1,3,7,10-tetraazacyclododecane ligands efficiently hydrolyze nerve agents simulants p-nitrophenyl diphenyl phosphate and methylparaoxon as transition metal complexes at 25 °C and pH 8 with half-lives of the order of a few minutes. Mechanistically, these catalysts show an enzyme-like behavior, hence they constitute an example of nanozymes. The catalytic site appears to involve a single metal ion and its recognition of the substrates is driven mostly by hydrophobic interactions. The ease of preparation and the mild conditions at which they operate, make these nanozymes appealing catalysts for the detoxification after contamination with organophosphorus nerve agents, particularly those poorly soluble in water.

Ultrathin Zirconium Hydroxide Nanosheet-Assembled Nanofibrous Membranes for Rapid Degradation of Chemical Warfare Agents

Organophosphorus-based chemical warfare agents (CWAs) are highly poisonous, and recent attacks using nerve agents have stimulated researchers to develop breakthrough materials for their fast degradation. Zr-based materials have been identified as the most effective catalysts for breaking down CWAs, but in their powdered form, their practical application in personal protective equipment is limited. Herein, a surface-confined strategy for the direct growth of vertically aligned zirconium hydroxide (Zr(OH)₄ ) nanosheets with ultrathin and tortuous structures on nanofibers is reported. The freestanding Zr(OH)₄ nanosheet-assembled nanofibrous membranes (NANMs) show superior catalytic performance to degrade dimethyl methylphosphonate, a nerve agent simulant, with a half-life of 4 min. In addition, intriguing membrane-type NANMs feature integrated properties of exceptional breathability, prominent flexibility, and robust fatigue resistance over one million buckling loads. This facile strategy provides a novel route to manufacture new classes of nanosheet-supported membranes for chemical-protective materials, in particular for gas filters, protective suits, and clothing.

Efficiently Selective Oxidation of H2S to Elemental Sulfur over Covalent Triazine Framework Catalysts

As a highly toxic and corrosive waste gas in the industry, hydrogen sulfide (H₂S) usually originates from the utilization of coal, petroleum, and natural gas. The selective catalytic elimination of H₂S shows great significance to ensure the safety of industrial processes and health of human beings. Herein, we report efficiently selective oxidation of H₂S to elemental sulfur over covalent triazine framework (CTF-1-x, x = 400, 500, 600, 400-600 °C) catalysts. CTF-1-x samples were prepared from polymerization of 1,4-dicyanobenzene to form polyaryl triazine networks under ion solidothermal conditions in the presence of ZnCl₂, which acts as both an initiator and a porogen. The resultant CTF-1-x samples possess abundant micro-mesoporosity, large Brunauer-Emmett-Teller (BET) surface areas, and tunable structural base sites with edge amine and graphitic nitrogen characteristics, which were homogeneously decorated onto their frameworks. As a result, CTF-1-x samples act as efficient and long-lived catalysts in selective oxidation of H₂S to sulfur under ambient conditions (100% H₂S conversion, 100% sulfur selectivity at 180 °C, 12 000 mL/(g·h)), and their activities were superior to those of commercial Fe₂O₃ and g-C₃N₄ desulfurization catalysts. Abundant nitrogen structural base sites of CTF-1-x effectively activate the reactants, and abundant micro-mesoporosity facilitates mass transfer in and out of CTF-1-x. The improved design of the nitrogen-doped carbon material for H₂S activation and conversion could enhance the development of more active and robust nitrogen-doped carbon catalysts.

Unique ternary Ni-MOF-74/Ni2P/MoSx composite for efficient photocatalytic hydrogen production: Role of Ni2P for accelerating separation of photogenerated carriers

A reasonable introduction of MOFs-derived Ni₂P with high dispersity is a valid way to reduce the recombination rate of photogenerated electron-holes, thus for more effective visible-light-driven water splitting. In this study, Ni-MOF-74/Ni₂P precursor was obtained by low-temperature phosphating method. A ternary heterojunction Ni-MOF-74/Ni₂P/MoS_x with a unique structure is obtained by a solution-based mixing method. The unique structure of Ni-MOF-74/Ni₂P provides advantages for MoS_x load. The UV-visible diffuse reflectance spectroscopy proves that the introduction of Ni₂P improves the utilization of visible light by the composite catalyst 10%-NPMS and promotes more electrons generation, thereby improving photocatalytic hydrogen production activity. It is proved that the introduced Ni₂P can accelerate the separation of photogenerated carriers by characterization (PL, EIS, LSV, etc.) analyses. The composite catalyst 10%-NPMS with the best hydrogen production activity was obtained by adjusting the ratio between Ni-MOF-74/Ni₂P and MoS_x. The photocatalytic hydrogen evolution of the composite catalyst 10%-NPMS (286.16 μmol) is 28.30, 2.78, 3.79 and 2.41 times that of pure Ni-MOF-74, Ni₂P, MoS_x and binary 10%-Ni-MOF-74/MoS_x within 5 h, respectively. And the hybrid 10%-Ni-MOF-74/Ni₂P/MoS_x exhibits excellent photocatalytic hydrogen evolution performance and good stability. This research will provide a new strategy for synthesizing unique ternary composite materials by using metal organic framework materials as precursors.

Reduced polyoxomolybdate immobilized on reduced graphene oxide for rapid catalytic decontamination of a sulfur mustard simulant

Keggin-type polyoxometalates (POMs) were immobilized on poly(diallyldimethylammonium chloride) (PDDA) functionalized reduced graphene oxide (rGO) by a facile and broad-spectrum hydrothermal method. The prepared POMs@PDDA-rGO composites (POM = H3PMo12O40, H3PW12O40, H5PMo10V2O40) have been thoroughly characterized using a series of techniques. The three composites can catalyze the oxidative decontamination of a sulfur mustard simulant, 2-chloroethyl ethyl sulfide (CEES) in the order of PMo12@PDDA-rGO > PMo10V2@PDDA-rGO > PW12@PDDA-rGO. Notably, under ambient conditions PMo12@PDDA-rGO can convert 99% of CEES within 30 min in the presence of nearly stoichiometric aqueous H2O2 (3 wt%) and its catalytic activity is significantly higher than that of homogeneous H3PMo12O40. XPS spectral analysis and control experiments indicate that the Mo center of POM is reduced from +6 to +5 during the hydrothermal process, and the excellent catalytic performance is related to the reduction of Mo. Moreover, the PMo12@PDDA-rGO composite is stable during the decontamination process and it can be used for at least five cycles without loss of activity.

Metal-Organic Framework-Based Hierarchically Porous Materials: Synthesis and Applications

Metal-organic frameworks (MOFs) have been widely recognized as one of the most fascinating classes of materials from science and engineering perspectives, benefiting from their high porosity and well-defined and tailored structures and components at the atomic level. Although their intrinsic micropores endow size-selective capability and high surface area, etc., the narrow pores limit their applications toward diffusion-control and large-size species involved processes. In recent years, the construction of hierarchically porous MOFs (HP-MOFs), MOF-based hierarchically porous composites, and MOF-based hierarchically porous derivatives has captured widespread interest to extend the applications of conventional MOF-based materials. In this Review, the recent advances in the design, synthesis, and functional applications of MOF-based hierarchically porous materials are summarized. Their structural characters toward various applications, including catalysis, gas storage and separation, air filtration, sewage treatment, sensing and energy storage, have been demonstrated with typical reports. The comparison of HP-MOFs with traditional porous materials (e.g., zeolite, porous silica, carbons, metal oxides, and polymers), subsisting challenges, as well as future directions in this research field, are also indicated.

Flexible paper-based Ni-MOF composite/AuNPs/CNTs film electrode for HIV DNA detection

It is very important to develop a rapid, simple, low cost point-of-care (POC) method for the early diagnosis of pathogens. In this work, a flexible paper-based electrode based on nickel metal-organic framework (Ni-MOF) composite/Au nanoparticles/carbon nanotubes/polyvinyl alcohol (Ni-Au composite/CNT/PVA) was constructed to detect target human immunodeficiency virus (HIV) DNA by DNA hybridization using methylene blue (MB) as a redox indicator. The CNT/PVA and Ni-Au composite were deposited on the cellulose membrane by vacuum filtration and drop-coating method in turn to obtain Ni-Au composite/CNT/PVA (CCP) film electrode. Compared to the CNT/PVA film electrode, CCP film electrode makes a higher loading of the probe DNA for its large specific surface area and conjugated π-electron system that can provide hydrogen bond sources to achieve interactions between MOF and single-stranded DNA, which improves the sensitivity for detecting target DNA. The variation of peak current for MB molecules adsorbed onto DNA before and after hybridization with HIV DNA was monitored. Electrochemical results proved that the CCP film maintained stable electrochemical property even after bending 200 times or stretching under different strains from 0% to 20%. The flexible paper electrode showed excellent sensing performance with a linear range of 10 nM-1 μM and a low detection limit of 0.13 nM. The target HIV DNA was successfully detected even in complex serum samples using the flexible CCP film electrode. Therefore, the simple and inexpensive flexible paper-based MOF composite film electrode can also be utilized for other pathogens POC diagnosis.

Stretchable and Multi-Metal-Organic Framework Fabrics Via High-Yield Rapid Sorption-Vapor Synthesis and Their Application in Chemical Warfare Agent Hydrolysis

Protocols to create metal-organic framework (MOF)/polymer composites for separation, chemical capture, and catalytic applications currently rely on relatively slow solution-based processing to form single MOF composites. Here, we report a rapid, high-yield sorption-vapor method for direct simultaneous growth of single and multiple MOF materials onto untreated flexible and stretchable polymer fibers and films. The synthesis utilizes favorable reactant absorption into polymers coupled with rapid vapor-driven MOF crystallization to form high surface area (>250 m²/g_composite) composites, including UiO-66-NH₂, HKUST-1, and MOF-525 on spandex, nylon, and other fabrics. The resulting composites are robust and maintain their functionality even after stretching. Stretchable MOF fabrics enable rapid solid-state hydrolysis of the highly toxic chemical warfare agent soman and paraoxon-methyl simulant. We show that this approach can readily be scaled by solution spray-coating of MOF precursors and to large area substrates.

Zirconium and Aluminum MOFs for Low-Pressure SO2 Adsorption and Potential Separation: Elucidating the Effect of Small Pores and NH2 Groups

Finding new adsorbents for the desulfurization of flue gases is a challenging task but is of current interest, as even low SO₂ emissions impair the environment and health. Four Zr- and eight Al-MOFs (Zr-Fum, DUT-67(Zr), NU-1000, MOF-808, Al-Fum, MIL-53(Al), NH₂-MIL-53(Al), MIL-53(tdc)(Al), CAU-10-H, MIL-96(Al), MIL-100(Al), NH₂-MIL-101(Al)) were examined toward their SO₂ sorption capability. Pore sizes in the range of about 4-8 Å are optimal for SO₂ uptake in the low-pressure range (up to 0.1 bar). Pore widths that are only slightly larger than the kinetic diameter of 4.1 Å of the SO₂ molecules allow for multi-side-dispersive interactions, which translate into high affinity at low pressure. Frameworks NH₂-MIL-53(Al) and NH₂-MIL-101(Al) with an NH₂-group at the linker tend to show enhanced SO₂ affinity. Moreover, from single-gas adsorption isotherms, ideal adsorbed solution theory (IAST) selectivities toward binary SO₂/CO₂ gas mixtures were determined with selectivity values between 35 and 53 at a molar fraction of 0.01 SO₂ (10.000 ppm) and 1 bar for the frameworks Zr-Fum, MOF-808, NH₂-MIL-53(Al), and Al-Fum. Stability tests with exposure to dry SO₂ during ≤10 h and humid SO₂ during 5 h showed full retention of crystallinity and porosity for Zr-Fum and DUT-67(Zr). However, NU-1000, MOF-808, Al-Fum, MIL-53(tdc), CAU-10-H, and MIL-100(Al) exhibited ≥50-90% retained Brunauer-Emmett-Teller (BET)-surface area and pore volume; while NH₂-MIL-100(Al) and MIL-96(Al) demonstrated a major loss of porosity under dry SO₂ and MIL-53(Al) and NH₂-MIL-53(Al) under humid SO₂. SO₂ binding sites were revealed by density functional theory (DFT) simulation calculations with adsorption energies of -40 to -50 kJ·mol^-1 for Zr-Fum and Al-Fum and even above -50 kJ·mol^-1 for NH₂-MIL-53(Al), in agreement with the isosteric heat of adsorption near zero coverage (ΔH_ads⁰). The predominant, highest binding energy noncovalent binding modes in both Zr-Fum and Al-Fum feature μ-OH^δ+···^δ-OSO hydrogen bonding interactions. The small pores of Al-Fum allow the interaction of two μ-OH bridges from opposite pore walls with the same SO₂ molecule via OH^δ+···^δ-OSO^δ-···^δ+HO hydrogen bonds. For NH₂-MIL-53(Al), the DFT high-energy binding sites involve NH^δ+···^δ-OS together with the also present Al-μ-OH^δ+···^δ-OS hydrogen bonding interactions and C₆-π^δ-···^δ+SO₂, N^δ-···^δ+SO₂ interactions.

Recognition and Sequestration of Toxic Inorganic Water Pollutants with Hydrolytically Stable Metal-Organic Frameworks

Water pollution and crisis of freshwater is one of the most alarming concern globally, which threatens the development and survival of living beings. Recycling of contaminated water has been the prime demand of 21^st century as the area of contamination in natural waterbodies increasing rapidly worldwide. Detoxification and purification of wastewater via adsorptive removal technology has been proven to be more efficient because of it's simplicity, lesser complexity and cost-effectiveness. As the most rapid-growing division of coordination chemistry, porous coordination polymers (PCPs) or metal-organic frameworks (MOFs) with the liberty of crafting tailorable porous architecture and presence of numerous functional sites have become quintessential for recognition and sequestration of water pollutants. This personal account intends to highlight our recent contributions in the field of sensing and sequestration of toxic aquatic inorganic pollutants by functionalized water stable MOFs.

A rational design of layered metal-organic framework towards high-performance adsorption of hazardous organic dye

Water pollution originating from organic dyes is endangering the survival and development of society; however, adsorbents with high capacity (>5000 mg g^-1) for the fast removal (≤30 min) of Congo Red (CR) in aqueous solution have been not reported to date. In the present work, an acid-base stably layered MOF, [Cd(H₂L)(BS)₂]_n·2nH₂O (L-MOF-1, H₂L = N1,N2-bis(pyridin-3-ylmethyl)ethane-1,2-diamine, BS = benzenesulfonate), was hydrothermally prepared. L-MOF-1 exhibited high-performance adsorption of CR in aqueous solution at room temperature. The experimental adsorption capacity of the L-MOF-1 adsorbent towards CR reached up to about 12 000 mg g^-1 in 20 min in the pH range of 2.2-4.7, which is the best adsorbent with the highest capacity and fastest adsorption of CR to date. The spontaneous adsorption process can be described by the pseudo-second-order kinetic and Langmuir isotherm models. Meanwhile, the L-MOF-1 absorbent possessed a highly positive zeta potential in acid condition (even at pH = 2.2, zeta potential = 36.2 mV). Its good adsorption performance mainly originates from its strong electrostatic attraction with CR in acidic condition, together with diverse hydrogen bonds and ππ stacking interactions. Furthermore, the L-MOF-1 absorbent exhibited good selectivity and could be reused five times through simply washing, where its adsorption efficiency was hardly affected. Therefore, L-MOF-1 is a potential absorbent for effectively removing CR from dye wastewater.

Advances in Enzyme and Ionic Liquid Immobilization for Enhanced in MOFs for Biodiesel Production

Biodiesel is a promising candidate for sustainable and renewable energy and extensive research is being conducted worldwide to optimize its production process. The employed catalyst is an important parameter in biodiesel production. Metal-organic frameworks (MOFs), which are a set of highly porous materials comprising coordinated bonds between metals and organic ligands, have recently been proposed as catalysts. MOFs exhibit high tunability, possess high crystallinity and surface area, and their order can vary from the atomic to the microscale level. However, their catalytic sites are confined inside their porous structure, limiting their accessibility for biodiesel production. Modification of MOF structure by immobilizing enzymes or ionic liquids (ILs) could be a solution to this challenge and can lead to better performance and provide catalytic systems with higher activities. This review compiles the recent advances in catalytic transesterification for biodiesel production using enzymes or ILs. The available literature clearly indicates that MOFs are the most suitable immobilization supports, leading to higher biodiesel production without affecting the catalytic activity while increasing the catalyst stability and reusability in several cycles.

Hydrolytically Stable and Trifunctional Zirconium-Based Organic Frameworks toward Cr2O72- Detection, Capture, and Photoreduction

Chromium Cr(VI) is frequently used in many fields and has been intensively researched for detection and/or removal from contaminated water. However, the existing approaches are still of low efficiency, high cost, and cumbersome in operation. It is thus highly imperative to hunt for alternative avenues to get out of the predicament. In this work, two bcu topological and highly stable zirconium-metal-organic frameworks (Zr-MOFs) of 1 and 2 have been deliberately prepared, displaying channel-type interior spaces replete with free bipyridine/biquinoline matrices and Zr-O defect sites. Because of their unique intrinsic features of high porosity and photosensitivity, 1 and 2 were deployed as versatile platforms to sense, adsorb, and catalytically reduce Cr(VI) ions. Indeed, the Zr-MOF of 1 performs excellently in fluorescence sensing and adsorption trapping of Cr(VI), with an ultralow detection limit of 0.0176 ppm and a fairly high saturated adsorption capacity of 145.77 mg/g, while 2 is more powerful than 1 in photochemical removal of Cr(VI), exhibiting a remarkable reduction efficiency of 98.05% just within 70 min and still up to 92.21% even after five consecutive photocatalytic cycles. Furthermore, possible photoluminescence, quenching, and reduction mechanisms were also tentatively proposed. This study may open up a new avenue for addressing some unresolved environmental issues, that is, the decontamination of highly toxic Cr(VI) from water.

In Situ Porphyrin Substitution in a Zr(IV)-MOF for Stability Enhancement and Photocatalytic CO2 Reduction

Despite numerous inherent merits of metal-organic frameworks (MOFs), structural fragility has imposed great restrictions on their wider involvement in many applications, such as in catalysis. Herein, a strategy for enhancing stability and enabling functionality in a labile Zr(IV)-MOF has been proposed by in situ porphyrin substitution. A size- and geometry-matched robust linear porphyrin ligand 4,4'-(porphyrin-5,15-diyl)dibenzolate (DCPP^2- ) is selected to replace the 4,4'-(1,3,6,8-tetraoxobenzo[lmn][3,8]phenanthroline-2,7(1H,3H,6H,8H)-diyl)dibenzoate (NDIDB^2- ) ligand in the synthesis of BUT-109(Zr), affording BUT-110 with varied porphyrin contents. Compared to BUT-109(Zr), the chemical stability of BUT-110 series is greatly improved. Metalloporphyrin incorporation endows BUT-110 MOFs with high catalytic activity in the photoreduction of CO₂ , in the absence of photosensitizers. By tuning the metal species and porphyrin contents in BUT-110, the resulting BUT-110-50%-Co is demonstrated to be a good photocatalyst for selective CO₂ -to-CO reduction, via balancing the chemical stability, photocatalytic efficiency, and synthetic cost. This work highlights the advantages of in situ ligand substitution for MOF modification, by which uniform distribution and high content of the incoming ligand are accessible in the resulting MOFs. More importantly, it provides a promising approach to convert unstable MOFs, which mainly constitute the vast MOF database but have always been neglected, into robust functional materials.

Beyond structural motifs: the frontier of actinide-containing metal-organic frameworks

In this perspective, we feature recent advances in the field of actinide-containing metal-organic frameworks (An-MOFs) with a main focus on their electronic, catalytic, photophysical, and sorption properties. This discussion deviates from a strictly crystallographic analysis of An-MOFs, reported in several reviews, or synthesis of novel structural motifs, and instead delves into the remarkable potential of An-MOFs for evolving the nuclear waste administration sector. Currently, the An-MOF field is dominated by thorium- and uranium-containing structures, with only a few reports on transuranic frameworks. However, some of the reported properties in the field of An-MOFs foreshadow potential implementation of these materials and are the main focus of this report. Thus, this perspective intends to provide a glimpse into the challenges, triumphs, and future directions of An-MOFs in sectors ranging from the traditional realm of gas sorption and separation to recently emerging areas such as electronics and photophysics.

High-Throughput Electron Diffraction Reveals a Hidden Novel Metal-Organic Framework for Electrocatalysis

Metal-organic frameworks (MOFs) are known for their versatile combination of inorganic building units and organic linkers, which offers immense opportunities in a wide range of applications. However, many MOFs are typically synthesized as multiphasic polycrystalline powders, which are challenging for studies by X-ray diffraction. Therefore, developing new structural characterization techniques is highly desired in order to accelerate discoveries of new materials. Here, we report a high-throughput approach for structural analysis of MOF nano- and sub-microcrystals by three-dimensional electron diffraction (3DED). A new zeolitic-imidazolate framework (ZIF), denoted ZIF-EC1, was first discovered in a trace amount during the study of a known ZIF-CO3 -1 material by 3DED. The structures of both ZIFs were solved and refined using 3DED data. ZIF-EC1 has a dense 3D framework structure, which is built by linking mono- and bi-nuclear Zn clusters and 2-methylimidazolates (mIm- ). With a composition of Zn3 (mIm)5 (OH), ZIF-EC1 exhibits high N and Zn densities. We show that the N-doped carbon material derived from ZIF-EC1 is a promising electrocatalyst for oxygen reduction reaction (ORR). The discovery of this new MOF and its conversion to an efficient electrocatalyst highlights the power of 3DED in developing new materials and their applications.

Assembly of a Metal-Organic Framework (MOF) Membrane on a Solid Electrocatalyst: Introducing Molecular-Level Control Over Heterogeneous CO2 Reduction

Electrochemically active Metal‐Organic Frameworks (MOFs) have been progressively recognized for their use in solar fuel production schemes. Typically, they are utilized as platforms for heterogeneous tethering of exceptionally large concentration of molecular electrocatalysts onto electrodes. Yet so far, the potential influence of their extraordinary chemical modularity on electrocatalysis has been overlooked. Herein, we demonstrate that, when assembled on a solid Ag CO₂ reduction electrocatalyst, a non‐catalytic UiO‐66 MOF acts as a porous membrane that systematically tunes the active site's immediate chemical environment, leading to a drastic enhancement of electrocatalytic activity and selectivity. Electrochemical analysis shows that the MOF membrane improves catalytic performance through physical and electrostatic regulation of reactants delivery towards the catalytic sites. The MOF also stabilizes catalytic intermediates via modulation of active site's secondary coordination sphere. This concept can be expanded to a wide range of proton‐coupled electrochemical reactions, providing new means for precise, molecular‐level manipulation of heterogeneous solar fuels systems.

Thiosemicarbazone modified zeolitic imidazolate framework (TSC-ZIF) for mercury(ii) removal from water

Zeolitic imidazolate frameworks (ZIF-8), and their derivatives, have been drawing increasing attention due to their thermal and chemical stability. The remarkable stability of ZIF-8 in aqueous and high pH environments renders it an ideal candidate for the removal of heavy metals from wastewater. In this study, we present the preparation of novel aldehyde-based zeolitic imidazolate frameworks (Ald-ZIF) through the integration of mixed-linkers: 2-methylimidazole (MIM) and imidazole-4-carbaldehyde (AldIM). The prepared Ald-ZIFs were post-synthetically modified with bisthiosemicarbazide (Bisthio) and thiosemicarbazide (Thio) groups, incorporating thiosemicarbazone (TSC) functionalities to the core of the framework. This modification results in the formation of TSC-functionalized ZIF derivatives (TSC-ZIFs). Thiosemicarbazones are versatile metal chelators, hence, adsorption properties of TSC-ZIFs for the removal of mercury(ii) from water were explored. Removal of mercury(ii) from homoionic aqueous solutions, binary and tertiary systems in competition with lead(ii) and cadmium(ii) under ambient conditions and neutral pH are reported in this study. MIM3.5:Thio1:Zn improved the removal efficiency of mercury(ii) from water, up to 97% in two hours, with an adsorption capacity of 1667 mg g-1. Desorption of mercury(ii) from MIM3.5:Thio1:Zn was achieved under acidic conditions, regenerating MIM3.5:Thio1:Zn for five cycles of mercury(ii) removal. TSC-ZIF derivatives, designed and developed here, represent a new class of dynamically functionalized adsorption material displaying the advantages of simplicity, efficiency, and reusability.

Force Fields for Molecular Modeling of Sarin and its Simulants: DMMP and DIMP

Even three decades after signing the Chemical Weapons Convention, organophosphorus chemical warfare agents (CWAs), such as sarin, remain a threat. The development of novel methods for the detection of CWAs, protection from CWAs, and CWA decontamination motivates research on their physicochemical properties. Due to the extreme toxicity of sarin, most of the experimental studies are carried out using less toxic simulant compounds. In addition to experimental studies of sarin simulants, both sarin and simulants can be studied using in silico experiments-molecular simulations. The results of classical molecular modeling of the compounds and their agreement with experimental data rely on the force field used to describe the system. In recent years, there have been several force fields proposed for sarin and its most common simulant dimethyl methylphosphonate (DMMP). However, other simulants frequently used in experiments received less attention from the molecular simulation perspective, for example, to date, there is no force field and no simulation data for diisopropyl methylphosphonate (DIMP). Here, we compare the literature force fields for sarin and DMMP, focusing specifically on the vapor-liquid equilibrium for the pure species. We carried out Monte Carlo and molecular dynamics simulations using the existing literature force fields from which we predicted the liquid densities and vapor pressures developing the entire binodal curves. We compared the predictions to the experimental data and showed that the TraPPE-UA force field outperformed the other force fields. Thus, we extended TraPPE-UA for DIMP, utilized this force field in molecular simulations, and predicted the liquid densities and vapor pressures for a range of temperatures (binodal curve), which agreed well with the published experimental data. From the binodal, we calculated the critical properties of DIMP and demonstrated that these parameters can be used in the Peng-Robinson equation of state for this compound.

Tuning the Properties of MOF-808 via Defect Engineering and Metal Nanoparticle Encapsulation

Defect engineering and metal encapsulation are considered as valuable approaches to fine-tune the reactivity of metal-organic frameworks. In this work, various MOF-808 (Zr) samples are synthesized and characterized with the final aim to understand how defects and/or platinum nanoparticle encapsulation act on the intrinsic and reactive properties of these MOFs. The reactivity of the pristine, defective and Pt encapsulated MOF-808 is quantified with water adsorption and CO2 adsorption calorimetry. The results reveal strong competitive effects between crystal morphology and missing linker defects which in turn affect the crystal morphology, porosity, stability, and reactivity. In spite of leading to a loss in porosity, the introduction of defects (missing linkers or Pt nanoparticles) is beneficial to the stability of the MOF-808 towards water and could also be advantageously used to tune adsorption properties of this MOF family.

Effective adsorption of A-series chemical warfare agents on graphdiyne nanoflake: a DFT study

Chemical warfare agents (CWAs) are highly poisonous and their presence may cause diverse effects not only on living organisms but also on environment. Therefore, their detection and removal in a short time span is very important. In this regard, here the utility of graphdiyne (GDY) nanoflake is studied theoretically as an electrochemical sensor material for the hazardous CWAs including A-230, A-232, and A-234. Herein, we explain the phenomenon of adsorption of A-series CWAs on GDY nanoflake within the density functional theory (DFT) framework. The characterisation of adsorption is based on optimised geometries, BSSE-corrected energies, SAPT0, RDG, FMO, CHELPG charge transfer, QTAIM and UV-Vis analyses. The calculated counterpoise adsorption energies for reported complexes range from - 13.70 to - 17.19 kcal mol^-1. These adsorption energies show that analytes are physiosorbed onto GDY which usually takes place through noncovalent interactions. The noncovalent adsorption of CWAs on GDY is also attributed by the SAPT0, RDG and QTAIM analyses. These properties also reveal that dispersion factors dominate in the complexes among many noncovalent components (exchange, induction, electrostatic, steric and repulsion). In order to estimate the sensitivity of GDY, the %sensitivity and average energy gap variations are quantitatively measured by energies of HOMO and LUMO orbitals. In terms of adsorption affinity of GDY, UV-Vis analysis, CHELPG charge transfer and DOS analyses depict an appreciable response towards these toxic CWAs. Graphical abstract.

Bifunctional Europium(III) and Niobium(V)-Containing Saponite Clays for the Simultaneous Optical Detection and Catalytic Oxidative Abatement of Blister Chemical Warfare Agents

For the first time, the co-presence in the saponite structure of luminescent Eu^III and catalytic Nb^V metal sites was exploited for the simultaneous detection and catalytic abatement of sulfur-containing blister chemical warfare agents. Metal centers were introduced in structural positions of the saponite (in the interlayer space or inside the inorganic framework) following two different synthetic methodologies. The functionalized saponites were able to reveal the presence of a sulfur mustard simulant (2-chloroethyl)ethyl sulfide (CEES) after few seconds of contact time and more than 80 % of the substrate was catalytically decomposed after 24 h in the presence of aqueous hydrogen peroxide.

Three-Dimensional Electron Diffraction for Structural Analysis of Beam-Sensitive Metal-Organic Frameworks

Electrons interact strongly with matter, which makes it possible to obtain high-resolution electron diffraction data from nano- and submicron-sized crystals. Using electron beam as a radiation source in a transmission electron microscope (TEM), ab initio structure determination can be conducted from crystals that are 6–7 orders of magnitude smaller than using X-rays. The rapid development of three-dimensional electron diffraction (3DED) techniques has attracted increasing interests in the field of metal-organic frameworks (MOFs), where it is often difficult to obtain large and high-quality crystals for single-crystal X-ray diffraction. Nowadays, a 3DED dataset can be acquired in 15–250 s by applying continuous crystal rotation, and the required electron dose rate can be very low (<0.1 e s−1 Å−2). In this review, we describe the evolution of 3DED data collection techniques and how the recent development of continuous rotation electron diffraction techniques improves data quality. We further describe the structure elucidation of MOFs using 3DED techniques, showing examples of using both low- and high-resolution 3DED data. With an improved data quality, 3DED can achieve a high accuracy, and reveal more structural details of MOFs. Because the physical and chemical properties of MOFs are closely associated with their crystal structures, we believe 3DED will only increase its importance in developing MOF materials.

Laponite-Incorporated UiO-66-NH2-Polyethylene Oxide Composite Membranes for Protection against Chemical Warfare Agent Simulants

A strategy is developed to enhance the barrier protection of polyethylene oxide (PEO)-metal-organic framework (MOF) composite films against chemical warfare agent simulants. To achieve enhanced protection, an impermeable high-aspect-ratio filler in the form of Laponite RD (LRD) clay platelets was incorporated into a composite PEO film containing MOF UiO-66-NH₂. The inclusion of the platelets aids in mitigating permeation of inert hydrocarbons (octane) and toxic chemicals (2-chloroethyl ethyl sulfide, 2-CEES) of dimensions/chemistry similar to prominent vesicant threats while still maintaining high water vapor transport rates (WVTR). By utilizing small-angle neutron scattering, small-angle X-ray scattering, and wide-angle X-ray scattering, the LRD platelet alignment of the films was determined, and the structure of the films was correlated with performance as a barrier material. Performance of the membranes against toxic chemical threats was assessed using permeation testing of octane and 2-CEES, a common simulant for the vesicant mustard gas, and breathability of the membranes was assessed using WVTR measurements. To assess their robustness, chemical exposure (in situ diffuse reflectance infrared Fourier transform spectroscopy) and mechanical (tensile strength) measurements were also performed. It was demonstrated that the barrier performance of the film upon inclusion of the LRD platelets exceeds that of other MOF-polymer composites found in the literature and that this approach establishes a new path for improving permselective materials for chemical protection applications.

Curcumin-Loaded Pickering Emulsion Formed by Ultrasound and Stabilized by Metal Organic Framework Optimization

The ultrasound-assisted preparation of a curcumin-loaded metal organic framework (MOF) UiO-66-NH₂ stabilized Pickering emulsion system was carried out in this study. A 3-level-4-factor Box–Behnken design (BBD) and response surface methodology (RSM) analysis were employed to systematically evaluate the effect of different experimental parameters (i.e., ultrasonic power, ultrasonic time, oil content, and MOF content) on curcumin loading capacity (LC) and encapsulation efficiency (EE). The results indicated that ultrasonic power and MOF content significantly affected LC and EE, whereas ultrasonic time and oil content had little effect. A mathematical model for optimizing the preparation of emulsion systems was established. Based on the ridge max analysis, an optimal condition for the newly developed curcumin-loaded MOF-Pickering emulsion was identified, i.e., ultrasonic power 150 W, ultrasonic time 11.17 min, oil content 20.0%, and MOF content 1.10%. At this condition, the LC and EE of curcumin obtained from the experiment reached 7.33% ± 0.54% and 56.18% ± 3.03%, respectively, which were within the prediction range of LC (7.35% ± 0.29%) and EE (54.34% ± 2.45%). The emulsion systems created in this study may find new applications for the delivery of bioactive compounds in food and pharmaceutical areas.

Quantitative Structure-Activity Relationship of Nanowire Adsorption to SO2 Revealed by In Situ TEM Technique

A quantitative structure-activity relationship (QSAR) is revealed based on the real-time sulfurization processes of ZnO nanowires observed via gas-cell in situ transmission electron microscopy (in situ TEM). According to the in situ TEM observations, the ZnO nanowires with a diameter of 100 nm (ZnO-100 nm) gradually transform into a core-shell nanostructure under SO₂ atmosphere, and the shell formation kinetics are quantitatively determined. However, only sparse nanoparticles can be observed on the surface of the ZnO-500 nm sample, which implies a weak solid-gas interaction between SO₂ and ZnO-500 nm. The QSAR model is verified with heat of adsorption (-ΔH°) and aberration-corrected TEM characterization. With the guidance of the QSAR model, the following adsorbing/sensing applications of ZnO nanomaterials are explored: (i) breakthrough experiment demonstrates the application potential of the ZnO-100 nm sample for SO₂ capture/storage; (ii) the ZnO-500 nm sample features good reversibility (RSD = 1.5%, n = 3) for SO₂ sensing, and the detection limit reaches 70 ppb.

Fragmented α-Amylase into Microporous Metal-Organic Frameworks as Bioreactors

This work presents an efficient and facile strategy to prepare an α-amylase bioreactor. As enzymes are quite large to be immobilized inside metal-organic frameworks (MOFs), the tertiary and quaternary structures of α-amylase were first disrupted using a combination of urea, dithiothreitol (DTT), and iodoacetamide (IAA). After losing its tertiary structure, the unfolded proteins can now penetrate into the microporous MOFs, affording fragmented α-amylase@MOF bioreactors. Among the different MOFs evaluated, UiO-66 gave the most promising potential due to the size-matching effect of the α-helix of the fragmented α-amylase with the pore size of UiO-66. The prepared bioreactor exhibited high yields of small carbohydrate (maltose) even when reused up to 15 times (>80% conversion).

Rapid, Biomimetic Degradation of a Nerve Agent Simulant by Incorporating Imidazole Bases into a Metal-Organic Framework

Metal-organic frameworks (MOFs) are excellent catalytic materials for the hydrolytic degradation of nerve agents and their simulants. However, most of the MOF-based hydrolysis catalysts to date are reliant on liquid water media buffered by a volatile liquid base. To overcome this practical limitation, we developed a simple and feasible strategy to synthesize MOF composites that structurally mimic phosphotriesterase's active site as well as its ligated histidine residues. By incorporating imidazole and its derivative into the pores of MOF-808, the obtained MOF composites achieved rapid degradation of a nerve agent simulant (dimethyl-4-nitrophenyl phosphate, DMNP) in pure water as well as in a humid environment without liquid base. Remarkably, one of the composites Im@MOF-808 displayed the highest catalytic activity for DMNP hydrolysis in unbuffered aqueous solutions among all reported MOF-based catalysts. Furthermore, solid-phase catalysis showed that Im@MOF-808 can also rapidly hydrolyze DMNP under high-humidity conditions without bulk water or external bases. This work provides a viable solution toward the implementation of MOF materials into protective equipment for practical nerve agent detoxification.

Fluorescence Microscopic Investigations of Molecular Dynamics in Self-Assembled Nanostructures

Many analytical methods employ self-assembled nanostructured materials as chemical recognition media. Molecular permeation through these materials exhibits unique selectivity owing to nanoconfinement-induced enhancement of permeant-nanostructure interactions. This Personal Account introduces our efforts to investigate the detailed dynamics of single or a small number of molecules in nanostructured materials. We developed new experimental and analysis approaches built upon laser-based fluorescence microscopy to measure the detailed translational and orientational dynamics of molecules diffusing in horizontally-oriented, cylindrical nanostructures, including surfactant micelles, silica mesopores, block copolymer microdomains, and bolaamphiphile-based organic nanotubes. Our studies clarified nanoscale details on the structural/chemical heterogeneity of the nanostructures, and their impacts on molecular mass transport dynamics.

Decomposition of the Simulant 2-Chloroethyl Ethyl Sulfide Blister Agent under Ambient Conditions Using Metal-Organic Frameworks

Metal organic frameworks (MOFs) have been suggested as promising materials for application in the degradation of chemical warfare agents, with the majority of studies to date focusing on nerve agents. One of the most prominent MOFs used in the detoxification of nerve agents is UiO-66, which is of interest as a future nerve agent decontaminant. However, blister agents, which constitute one of the most toxic and highly reactive categories of chemical agents, are yet to be examined as gas-phase decontamination targets using MOF structures. In this study, a novel type of UiO-66 with a smaller particle size, namely, UiO-66S, was used as a decontaminant for the blister agent simulant, 2-chloroethyl ethyl sulfide (2-CEES). The gas-phase chemical adsorption and decomposition of 2-CEES were demonstrated for the first time, with an estimated t_1/2 of 1.34 h. This value is the highest reported value for an MOF in gas-phase reaction conditions. The obtained nontoxic degradation products were identified, and the reaction mechanism was studied using density functional theory calculations. Furthermore, the synthesized UiO-66S catalyst also exhibits superior catalytic ability toward nerve agent simulants (diisopropyl fluorophosphate).The results of the study provide a firm basis for the use of UiO-66S as a future decontaminant for both nerve and blister agents.

Transient Catenation in a Zirconium-Based Metal-Organic Framework and Its Effect on Mechanical Stability and Sorption Properties

Interpenetration of two or more sublattices is common among many metal-organic frameworks (MOFs). Herein, we study the evolution of one zirconium cluster-based, 3,8-connected MOF from its non-interpenetrated (NU-1200) to interpenetrated (STA-26) isomer. We observe this transient catenation process indirectly using ensemble methods, such as nitrogen porosimetry and X-ray diffraction, and directly, using high-resolution transmission electron microscopy. The approach detailed here will serve as a template for other researchers to monitor the interpenetration of their MOF samples at the bulk and single-particle limits. We investigate the mechanical stability of both lattices experimentally by pressurized in situ X-ray diffraction and nanoindentation as well as computationally with density functional theory calculations. Both lines of study reveal that STA-26 is considerably more mechanically stable than NU-1200. We conclude this study by demonstrating the potential of these MOFs and their mixed phases for the capture of gaseous n-hexane, used as a structural mimic for the chemical warfare agent sulfur mustard gas.