Zirconium-Based Metal Organic Frameworks for the Capture of Carbon Dioxide and Ethanol Vapour. A Comparative Study

This paper reports on the comparison of three zirconium-based metal organic frameworks (MOFs) for the capture of carbon dioxide and ethanol vapour at ambient conditions. In terms of efficiency, two parameters were evaluated by experimental and modeling means, namely the nature of the ligands and the size of the cavities. We demonstrated that amongst three Zr-based MOFs, MIP-202 has the highest affinity for CO2 (-50 kJ·mol-1 at low coverage against around -20 kJ·mol-1 for MOF-801 and Muc Zr MOF), which could be related to the presence of amino functions borne by its aspartic acid ligands as well as the presence of extra-framework anions. On the other side, regardless of the ligand size, these three materials were able to adsorb similar amounts of carbon dioxide at 1 atm (between 2 and 2.5 µmol·m-2 at 298 K). These experimental findings were consistent with modeling studies, despite chemisorption effects, which could not be taken into consideration by classical Monte Carlo simulations. Ethanol adsorption confirmed these results, higher enthalpies being found at low coverage for the three materials because of stronger van der Waals interactions. Two distinct sorption processes were proposed in the case of MIP-202 to explain the shape of the enthalpic profiles.

Metal-Organic Frameworks With Variable Valence Metal-Photoactive Components: Emerging Platform for Volatile Organic Compounds Photocatalytic Degradation

With their outstanding diversities in both structures and performances, newly emerging metal-organic frameworks (MOFs) materials are considered to be the most promising artificial catalysts to meet multiple challenges in the fields of energy and environment. Especially in absorption and conversion of solar energy, a variety of MOFs can be readily designed to cover and harvest the sun irradiation of ultraviolet (UV), visible and near-infrared region through tuning both organic linkers and metal nodes to create optimal photocatalytic efficiency. Nowadays, a variety of MOFs were successfully synthesized as powerful photocatalysts for important redox reactions such as water-splitting, CO₂ reduction and aqueous environmental pollutants detoxification. MOFs applications in indoor-air VOCs pollutants cleaning, however, are less concerned partially because of limited diffusion of both gaseous pollutant molecules and photo-induced active species in very porous MOFs structures. In this mini-review, we focus on the major breakthroughs of MOFs as photocatalysts for the effective removal of indoor-air VOCs such as aldehydes, aromatics and short-chain alcohols. According to their nature of photoactive centers, herein MOFs photocatalysts are divided into two categories to comment, that is, MOFs with variable valence metal nodes as direct photoactive centers and MOFs with non-variable valence metal nodes but after combining other photoactive variable valence metal centers as excellent concentrated and concerted electron-transfer materials. The mechanisms and current challenges of the photocatalytic degradation of indoor-air VOC pollutants by these MOFs will be discussed as deeply as possible.

Visible-Light-Driven Sonophotocatalysis for the Rapid Reduction of Aqueous Cr(VI) Based on Zirconium-Porphyrin Metal-Organic Frameworks with csq Topology

Photochemical treatment of highly toxic Cr(VI) is a desirable and ecofriendly method to protect the environment and human beings. In this study, a MOF-based sonophotocatalytic system is established, in which visible-light-driven sonophotocatalytic reduction of toxic Cr(VI) to Cr(III) in water is investigated using zirconium-porphyrin metal-organic frameworks (MOFs) structured as PCN-222(M) [M = H₂, Zn(II), Fe(III), Co(II)]. In the view of the synergistic effect of sonochemistry and photocatalysis, PCN-222(M) exhibited enhanced activities for Cr(VI) reduction compared with the photocatalytic process. Kinetic studies showed that apparent reaction rate constants in the sonophotocatalytic system of PCN-222(M) are 1.5-3.3 times higher than those in photocatalysis. Fluorescence and UV-vis absorption spectra measurements demonstrate that the sonophotocatalytic process promotes the transfer of photoinduced electrons from PCN-222(M) to Cr(VI), thus enhancing the catalytic performance. The innovative combination of porous MOFs and sonophotocatalytic technology might become a feasible strategy to improve the existing MOF-based photocatalytic systems.

Magnetically Recyclable Fe3O4@TMU-32 Metal-Organic Framework Photocatalyst for Tetracycline Degradation Under Visible Light

Metal-organic frameworks (MOFs) are a new class of porous crystalline materials being used as photocatalysts for efficient pollutant removal and environmental remediation. In this study, the TMU-32 MOF was synthesized as an effective photocatalyst for the photodegradation of tetracycline (TC) with 96% efficiency in 60 min under visible light. The high photocatalytic activity of the TMU-32 MOF is mainly due to its large specific surface area, which is beneficial for promoting both the adsorption of TC and the separation of the photoinduced charges. Moreover, its desired crystallinity makes it a semiconductor with an appropriate band gap energy. Next, a composite of the TMU-32 MOF with Fe₃O₄ nanoparticles (as Fe₃O₄@TMU-32) was prepared as a magnetically recyclable photocatalyst. The results showed that the photocatalytic activity of the Fe₃O₄@TMU-32 nanocomposite is slightly lower (68% degradation of TC within 60 min) than that of TMU-32 toward TC degradation since Fe₃O₄ nanoparticles are not acting as a photocatalyst and are used only to make the host photocatalyst (here, TMU-32) magnetically separable. The effects of the photocatalyst concentration and recyclability on the photodegradation of TC were studied under similar conditions. We found that the Fe₃O₄@TMU-32 composite is easily recycled without a significant loss of photocatalytic activity after being used several times, indicating the stability of the photocatalyst. Finally, a density functional theory study was also conducted to investigate the structural and electronic properties such as the band gap energy and density of states of the TMU-32 MOF and the Fe₃O₄@TMU-32 composite. Our computational results are in good agreement with the experimental ones. A photocatalytic degradation mechanism was finally proposed under visible-light photoirradiation.

Facile synthesis of magnetic framework composite MgFe2O4@UiO-66(Zr) and its applications in the adsorption-photocatalytic degradation of tetracycline

Recently, metal-organic framework (MOF)-based hybrid composites have attracted significant attention in photocatalytic applications. In this work, MgFe₂O₄@UiO-66(Zr) (MFeO@UiO) composites with varying compositions were successfully synthesized via facile in situ assemblies. Depositing the UiO-66(Zr) framework onto ferrite nanoparticles yielded a composite structure having a lower bandgap energy (2.28-2.60 eV) than that of the parent UiO-66(Zr) (~3.8 eV). Moreover, the MFeO@UiO composite exhibited magnetic separation property and improved porosity. The removal experiment for tetracycline (TC) in aqueous media revealed that the MFeO@UiO composite exhibited a high total TC removal efficiency of ca. ~94% within 45-min preadsorption and 120-min visible-light illumination, which is higher than that of pristine ferrite and UiO-66(Zr). The enhanced photodegradation efficiency of MFeO@UiO is attributed to efficient interfacial charge transfer at the heterojunction and the synergistic effect between the semiconductors. Radical scavenging experiments revealed that photogenerated holes (h⁺) and hydroxyl radicals (·OH) were the major reactive species involved in TC photodegradation. Moreover, the prepared MFeO@UiO nanocomposite showed good recyclability and renewability, making it a potential material for wastewater treatments.

Iron-based metal-organic framework: Synthesis, structure and current technologies for water reclamation with deep insight into framework integrity

Water is a supreme requirement for the existence of life, the contamination from the point and non-point sources are creating a great threat to the water ecosystem. Advance tools and techniques are required to restore the water quality and metal-organic framework (MOFs) with a tunable porous structure, striking physical and chemical properties are an excellent candidate for it. Fe-based MOFs, which developed rapidly in recent years, are foreseen as most promising to overcome the disadvantages of traditional water depolluting practices. Fe-MOFs with low toxicity and preferable stability possess excellent performance potential for almost all water remedying techniques in contrast to other MOF structures, especially visible light photocatalysis, Fenton, and Fenton-like heterogeneous catalysis. Fe-MOFs become essential tool for water treatment due to their high catalytic activity, abundant active site and pollutant-specific adsorption. However, the structural degradation under external chemical, photolytic, mechanical, and thermal stimuli is impeding Fe-MOFs from further improvement in activity and their commercialization. Understanding the shortcomings of structural integrity is crucial for large-scale synthesis and commercial implementation of Fe-MOFs-based water treatment techniques. Herein we summarize the synthesis, structure and recent advancements in water remediation methods using Fe-MOFs in particular more attention is paid for adsorption, heterogeneous catalysis and photocatalysis with clear insight into the mechanisms involved. For ease of analysis, the pollutants have been classified into two major classes; inorganic pollutants and organic pollutants. In this review, we present for the first time a detailed insight into the challenges in employing Fe-MOFs for water remediation due to structural instability.

Polymeric Micro/Nanocarriers and Motors for Cargo Transport and Phototriggered Delivery

Smart polymer-based micro/nanoassemblies have emerged as a promising alternative for transporting and delivering a myriad of cargo. Cargo encapsulation into (or linked to) polymeric micro/nanocarrier (PC) strategies may help to conserve cargo activity and functionality when interacting with its surroundings in its journey to the target. PCs for cargo phototriggering allow for excellent spatiotemporal control via irradiation as an external stimulus, thus regulating the delivery kinetics of cargo and potentially increasing its therapeutic effect. Micromotors based on PCs offer an accelerated cargo-medium interaction for biomedical, environmental, and many other applications. This review collects the recent achievements in PC development based on nanomicelles, nanospheres, and nanopolymersomes, among others, with enhanced properties to increase cargo protection and cargo release efficiency triggered by ultraviolet (UV) and near-infrared (NIR) irradiation, including light-stimulated polymeric micromotors for propulsion, cargo transport, biosensing, and photo-thermal therapy. We emphasize the challenges of positioning PCs as drug delivery systems, as well as the outstanding opportunities of light-stimulated polymeric micromotors for practical applications.

Metal-Organic-Framework- and MXene-Based Taste Sensors and Glucose Detection

Taste sensors can identify various tastes, including saltiness, bitterness, sweetness, sourness, and umami, and have been useful in the food and beverage industry. Metal-organic frameworks (MOFs) and MXenes have recently received considerable attention for the fabrication of high-performance biosensors owing to their large surface area, high ion transfer ability, adjustable chemical structure. Notably, MOFs with large surface areas, tunable chemical structures, and high stability have been explored in various applications, whereas MXenes with good conductivity, excellent ion-transport characteristics, and ease of modification have exhibited great potential in biochemical sensing. This review first outlines the importance of taste sensors, their operation mechanism, and measuring methods in sensing utilization. Then, recent studies focusing on MOFs and MXenes for the detection of different tastes are discussed. Finally, future directions for biomimetic tongues based on MOFs and MXenes are discussed.

Experimental and Density Functional Theory Studies on a Zinc(II) Coordination Polymer Constructed with 1,3,5-Benzenetricarboxylic Acid and the Derived Nanocomposites from Activated Carbon

A coordination polymer with the composition C₁₂H₂₀O₁₆Zn₂ (ZnBTC) (BTC = benzene-1,3,5-tricarboxylate) was synthesized under hydrothermal conditions at 120 °C, and its crystal structure was determined using single-crystal X-ray crystallography. First-principles electronic structure investigation of the compound was carried out using the density functional theory computational approach. The highest occupied molecular orbital, the lowest unoccupied molecular orbital, the energy gap, and the global reactivity descriptors of ZnBTC were investigated in both the gas phase and the solvent phase using the implicit solvation model, while the donor-acceptor interactions were studied using natural bond orbital analyses. The results revealed that ZnBTC is more stable but less reactive in solvent medium. The larger stabilization energy E ⁽²⁾ indicates a greater interaction of ZnBTC in the solvent than in the gas phase. Orange peel activated carbon and banana peel activated carbon chemically treated with ZnCl₂ and/or KOH were used to modify the synthesis of ZnBTC to obtain nanocomposites. ZnBTC and the nanocomposites were characterized by powder X-ray diffraction (PXRD), thermogravimetric analysis, and Fourier transform infrared. The specific surface area (S _BET) and the average pore diameter of the materials were determined by nitrogen sorption measurements using the Brunauer-Emmett-Teller (BET) method, while scanning electron microscopy and transmission electron microscopy were used to observe their morphology and particle size, respectively. The PXRD of all the activated carbon materials exhibited peaks at 2θ values of 12.7 and 13.9° corresponding to a d-spacing of 6.94 and 6.32 Å, respectively. The N₂ adsorption-desorption isotherm of the materials are of type II with nanocomposites showing enhanced S _BET compared to the pristine ZnBTC. The results also revealed that activated carbons from the banana peel and the derived nanocomposites exhibited better porous structure parameters than those obtained from orange peel. The degradation efficiency of methyl orange in aqueous solutions using ZnBTC as a photocatalyst was found to be 52 %, while that of the nanocomposites were enhanced up to 79 %.

A cadmium(II) coordination polymer with a fivefold interpenetrating diamondoid three-dimensional framework: synthesis, crystal structure, luminescence and photocatalytic properties

A novel three-dimensional (3D) Cd^II coordination polymer, namely, poly[[μ₂-4,4'-bis(2-methylimidazol-1-yl)-[1,1'-biphenyl]](μ₂-5-methylisophthalato)cadmium(II)], [Cd(C₉H₆O₄)(C₂₀H₁₈N₄)]_n or [Cd(MIP)(4,4'-BMIBP)]_n, (I), was synthesized by the hydrothermal method using 5-methylisophthalic acid (H₂MIP), 4,4'-bis(2-methylimidazol-1-yl)-[1,1'-biphenyl] (4,4'-BMIBP) and Cd(NO₃)₂·6H₂O, and characterized by single-crystal X-ray diffraction, elemental analysis, IR spectroscopy and thermogravimetric analysis. Compound (I) exhibits a novel fivefold interpenetrating 3D diamondoid framework. Additionally, it shows fluorescence emission in the solid state and promising photocatalytic activities for the degradation of methylene blue (MB) in water at room temperature.

Space and Time Crystal Engineering in Developing Futuristic Chemical Technology

In the coming years, multipurpose catalysts for delivering different products under the same chemical condition will be required for developing smart devices for industrial or household use. In order to design such multipurpose devices with two or more specific roles, we need to incorporate a few independent but externally controllable catalytically active centers. Through space crystal engineering, such an externally controllable multipurpose MOF-based photocatalyst could be designed. In a chemical system, a few mutually independent secondary reaction cycles nested within the principal reaction cycle can be activated externally to yield different competitive products. Each reaction cycle can be converted into a time crystal, where the time consuming each reaction step could be converted as an event and all the reaction steps or events could be connected by a circle to build a time crystal. For fractal reaction cycles, a time polycrystal can be generated. By activating a certain fractal event based nested time crystal branch, we can select one of the desired competitive products according to our needs. This viewpoint intends to bring together the ideas of (spatial) crystal engineering and time crystal engineering in order to make use of the time–space arrangement in reaction–catalysis systems and introduce new aspects to futuristic chemical engineering technology.

Heterometal-Organic Cages as Photo-Fenton-like Catalysts

Metal-organic cages, a class of supramolecular containers constructed by the self-assembly of metal ions and organic ligands, show great promise as catalytic agents. In this work, we designed and synthesized a series of rhombic dodecahedral Ni-Cu heterometal imidazolate cages (Ni₈Cu₆L₂₄) that can act as highly active photo-Fenton-like catalysts. These cages possess a high ability to generate hydroxyl radicals (^•OH) under visible light in the presence of H₂O₂, which can rapidly degrade organic pollutants (e.g., rhodamine B, methylene blue, and methyl orange) into CO₂ and H₂O. Besides, they are robust catalysts, with high catalytic activity and reusability under conditions in high H₂O₂ concentration, providing potentially advanced materials for degrading persistent organic pollutants.

Catching the Reversible Formation and Reactivity of Surface Defective Sites in Metal-Organic Frameworks: An Operando Ambient Pressure-NEXAFS Investigation

In this work, we apply for the first time ambient pressure operando soft X-ray absorption spectroscopy (XAS) to investigate the location, structural properties, and reactivity of the defective sites present in the prototypical metal-organic framework HKUST-1. We obtained direct evidence that Cu⁺ defective sites form upon temperature treatment of the powdered form of HKUST-1 at 160 °C and that they are largely distributed on the material surface. Further, a thorough structural characterization of the Cu⁺/Cu²⁺ dimeric complexes arising from the temperature-induced dehydration/decarboxylation of the pristine Cu²⁺/Cu²⁺ paddlewheel units is reported. In addition to characterizing the surface defects, we demonstrate that CO₂ may be reversibly adsorbed and desorbed from the surface defective Cu⁺/Cu²⁺ sites. These findings show that ambient pressure soft-XAS, combined with state-of-the-art theoretical calculations, allowed us to shed light on the mechanism involving the decarboxylation of the paddlewheel units on the surface to yield Cu⁺/Cu²⁺ complexes and their reversible restoration upon exposure to gaseous CO_2.

The Surge of Metal-Organic-Framework (MOFs)-Based Electrodes as Key Elements in Electrochemically Driven Processes for the Environment

Metal–organic-frameworks (MOFs) are emerging materials used in the environmental electrochemistry community for Faradaic and non-Faradaic water remediation technologies. It has been concluded that MOF-based materials show improvement in performance compared to traditional (non-)faradaic materials. In particular, this review outlines MOF synthesis and their application in the fields of electron- and photoelectron-Fenton degradation reactions, photoelectrocatalytic degradations, and capacitive deionization physical separations. This work overviews the main electrode materials used for the different environmental remediation processes, discusses the main performance enhancements achieved via the utilization of MOFs compared to traditional materials, and provides perspective and insights for the further development of the utilization of MOF-derived materials in electrified water treatment.

A Single Crystal Hybrid Ligand Framework of Copper(II) with Stable Intrinsic Blue-Light Luminescence in Aqueous Solution

Single-crystal solid-liquid dual-phase hybrid organic-inorganic ligand frameworks with reversible sensing response facilitated by external stimuli have received significant attention in recent years. This report presents a significant leap in designing electronic structures that display reversible dual-phase photoluminescence properties from single-crystal hybrid ligand frameworks. Three-dimensional Cu(C₃N₂H₄)₄Cl₂ complex frameworks were formed through the intermolecular hydrogen bonding and π⋯π stacking supramolecular interactions. The absorption band peaks at 627 nm were assigned to d-d transition showing 10Dq = 15,949 cm^-1 and crystal field stabilization energy (CFSE) = 0.6 × 10Dq = 114.4 kJmol^-1, while the ligand-to-metal charge transfer (LMCT) of complexes was displayed at 292 nm. The intense luminescence band results from LMCT present at 397 nm. Considering its structure, air stability, framework forming and stable luminescence in aqueous solution, the Cu(C₃N₂H₄)₄Cl₂ complex shows potential for luminescence Cu-based sensors using emission intensity to detect heavy metal ion species.

Experimental and Theoretical Study on the Interchange between Zr and Ti within the MIL-125-NH2 Metal Cluster

This study aims to investigate the effect of replacing Ti with Zr in the SBU of MIL-125-NH₂ . We were able to replace Ti with Zr in the mixed metal synthesis of MIL-125-NH₂ , for the first time. After experimentally confirming the consistency in their framework structure and comparing their morphology, we related the femtosecond light dynamics with photocatalytic CO₂ visible light conversion yield of the different variants in order to establish the composition-function relation in MIL-125 vis a vis CO₂ reduction. Introducing Zr to the system was found to cause structure defects due to missing linkers. The lifetime of the charge carriers for the mixed metal samples were shorter than that of the MIL-125-NH₂ . The study of CO₂ photocatalytic reduction under visible light indicated that the NH₂ group enhances the photocatalytic activity while the Zr incorporation inside the MIL framework introduces no significant improvements. In addition, the material systems were modelled and simulated through DFT calculations which concluded that the decrease of the photocatalytic activity is not related to the system electronic structure, insinuating that defects are the culprit.

Synthesis of a copper (II) metal-organic framework for photocatalytic degradation of rhodamine B dye in water

The Cu(II) metal-organic frameworks (MOFs) based on 1,3,5-benzenetricarboxylic acid (Cu₃(BTC)₂) was synthesized by the hydrothermal method. The synthesized Cu₃(BTC)₂ exhibited pyramid-shaped morphology and showing an average specific area of 32.16 m² g^-1. The Cu₃(BTC)₂ photocatalysts were characterized using Fourier-transform infrared spectroscopy (FTIR), powder X-ray diffraction (PXRD), field emission scanning electron microscopy-energy-dispersive X-ray spectroscopy (FESEM-EDX), UV-Vis diffusive reflectance spectra, and Brunauer-Emmett-Teller (BET). The photocatalytic activity of Cu₃(BTC)₂ was examined on Rhodamine B (RhB) degradation under visible light irradiation. The outcomes displayed exceedingly enhanced photocatalytic activity under visible light. In addition, its recyclability was also confirmed for multiple cycles. The easiness of construction and high photocatalytic performance of Cu₃(BTC)₂ photocatalysts can be capable in environmental applications to treat water contamination.

Photodegradation of Brilliant Green Dye by a Zinc bioMOF and Crystallographic Visualization of Resulting CO2

We present a novel bio-friendly water-stable Zn-based MOF (1), derived from the natural amino acid L-serine, which was able to efficiently photodegrade water solutions of brilliant green dye in only 120 min. The total degradation was followed by UV-Vis spectroscopy and further confirmed by single-crystal X-ray crystallography, revealing the presence of CO2 within its channels. Reusability studies further demonstrate the structural and performance robustness of 1.

Recent Advances in Metal-Organic Frameworks Derived Nanocomposites for Photocatalytic Applications in Energy and Environment

Solar energy is a key sustainable energy resource, and materials with optimal properties are essential for efficient solar energy-driven applications in photocatalysis. Metal-organic frameworks (MOFs) are excellent platforms to generate different nanocomposites comprising metals, oxides, chalcogenides, phosphides, or carbides embedded in porous carbon matrix. These MOF derived nanocomposites offer symbiosis of properties like high crystallinities, inherited morphologies, controllable dimensions, and tunable textural properties. Particularly, adjustable energy band positions achieved by in situ tailored self/external doping and controllable surface functionalities make these nanocomposites promising photocatalysts. Despite some progress in this field, fundamental questions remain to be addressed to further understand the relationship between the structures, properties, and photocatalytic performance of nanocomposites. In this review, different synthesis approaches including self-template and external-template methods to produce MOF derived nanocomposites with various dimensions (0D, 1D, 2D, or 3D), morphologies, chemical compositions, energy bandgaps, and surface functionalities are comprehensively summarized and analyzed. The state-of-the-art progress in the applications of MOF derived nanocomposites in photocatalytic water splitting for H2 generation, photodegradation of organic pollutants, and photocatalytic CO2 reduction are systemically reviewed. The relationships between the nanocomposite properties and their photocatalytic performance are highlighted, and the perspectives of MOF derived nanocomposites for photocatalytic applications are also discussed.

Advances of the highly efficient and stable visible light active photocatalyst Zr(IV)-phthalate coordination polymer for the degradation of organic contaminants in water

This work presents the restoration of the Zr-phthalate coordination polymer (Zr-Ph CP) via valuable application in photocatalysis. Zr-Ph CP was facilely synthesized using a soft hydrothermal method at 70 °C, and was characterized utilizing FTIR, Raman Spectrosopy, XPS, PXRD, SEM/EDX, BET, and a hyperspectral camera. Assessment of its photocatalytic degradation potential was performed against two different dyes, the cationic methylene blue (MB) and the anionic methyl orange (MO), as frequent models of organic contaminants, under properly selected mild visible illumination (9 W) where the bandgap energy (Eg) was determined to be 2.72 eV. Effects of different initial pH values and different dyes' initial concentrations were covered. Photocatalytic degradation studies showed that Zr-Ph CP effectively degraded both dyes for initial pH 7 within about 40-60 minutes. Degradation rate constants were calculated as 0.17 and 0.13 min-1 for MB and MO, respectively. Generally, both direct and indirect mechanisms share in the degradation, where adsorption has shown an important role. The repeated use of Zr-Ph CP does not significantly affect its photocatalytic performance suggesting high water stability.

The enhanced visible-light-induced photocatalytic activities of bimetallic Mn-Fe MOFs for the highly efficient reductive removal of Cr(vi)

The photocatalytic efficiencies of bimetallic MOFs, namely STA-12-Mn–Fe, for the reductive removal of Cr(vi) were explored. The best effective variable values were obtained and correlation between the response and influential variables was optimized via experimental design methodology. Complete Cr(vi) removal was achieved under natural sunlight and fluorescent 40 W lamp radiation at pH 2, with an initial Cr(vi) concentration of 20 mg L⁻¹, and 10 mg of photocatalyst within 30 min. A pseudo-first-order rate constant of 0.132 min⁻¹ at T = 298 K was obtained for the Cr(vi) reduction reaction. The title catalysts revealed high performance in the visible region based on photoefficiency measurements, while improved activity was observed compared to the corresponding single-metal MOFs under natural sunlight, highlighting the synergistic effect between the two metal ions. Trapping experiment results proved that direct electron transfer is the main pathway during the photocatalytic Cr(vi) reduction process.

The photocatalytic efficiencies of bimetallic MOFs for the reductive removal of Cr(vi) were explored. The catalysts revealed higher performance compared to the corresponding single-metal MOFs, highlighting the synergistic effect between the two metal ions.

Beyond structural motifs: the frontier of actinide-containing metal-organic frameworks

In this perspective, we feature recent advances in the field of actinide-containing metal-organic frameworks (An-MOFs) with a main focus on their electronic, catalytic, photophysical, and sorption properties. This discussion deviates from a strictly crystallographic analysis of An-MOFs, reported in several reviews, or synthesis of novel structural motifs, and instead delves into the remarkable potential of An-MOFs for evolving the nuclear waste administration sector. Currently, the An-MOF field is dominated by thorium- and uranium-containing structures, with only a few reports on transuranic frameworks. However, some of the reported properties in the field of An-MOFs foreshadow potential implementation of these materials and are the main focus of this report. Thus, this perspective intends to provide a glimpse into the challenges, triumphs, and future directions of An-MOFs in sectors ranging from the traditional realm of gas sorption and separation to recently emerging areas such as electronics and photophysics.

Porous 3,4-di(3,5-dicarboxyphenyl)phthalate-based Cd2+ coordination polymer and its potential applications

Porous coordination polymers with organic aminium as one of the guest species possess a potential application in dye adsorption and white-light material manufacture. Polycarboxylic acid with multiple COOH substituents tends to form this type of porous material (with metal ion). Here the solvothermal self-assembly between Cd²⁺ and a hexacarboxylic acid creates such a porous material [(CH₃)₂NH₂]₆[Cd₃(L)₂]·5DMF·3H₂O (H₆L = 3,4-di(3,5-dicarboxyphenyl)phthalic acid) 1. Total potential guest accessible void volume in 3-D 1 is found to be 4327 Å³. Based on its better porous structure and stability, the ability of 1 to adsorb organic dyes is investigated. It has been proved that (i) 1 can selectively adsorb cationic dyes as Azure A (AA⁺) and/or Methylene Blue (MB⁺), rather than neutral and anionic ones; (ii) the maximum adsorption capacity is 698.2 mg·g^-1 for AA⁺ and 573.2 mg·g^-1 for MB⁺, respectively; and (iii) to the adsorption of AA⁺, it can be recycled for at least five rounds. Also, it is utilized to fabricate the while-light emitting material. Based on the blue-light emission of 1, the trace Eu³⁺ and Tb³⁺ ions are introduced into the pores of 1 successfully, obtaining a white-light emitting material Eu³⁺/Tb³⁺@1 (CIE chromaticity coordinates: (0.33, 0.32)). Meanwhile, Eu³⁺/Tb³⁺@1 is found to be a potential fluorescence photochromic material, showing a yellow-white-blue light emission. According to these investigations, the relationship between material structure and its adsorption property for dyes, the points that should be paid attention to in the construction of white-light emitting materials as well as the potential adsorption mechanism for dyes and rare earth ions are deeply discussed.

Review on the hazardous applications and photodegradation mechanisms of chlorophenols over different photocatalysts

Chlorophenols are very important environmental pollutants, which have created huge problems for both aquatic and terrestrial lives. Therefore, their removal needs urgent, effective, and advanced technologies to safeguard our environment for future generation. This review encompasses a comprehensive study of the applications of chlorophenols, their hazardous effects and photocatalytic degradation under light illumination. The effect of various factors such as pH and presence of different anions on the photocatalytic oxidation of chlorophenols have been elaborated comprehensively. The production of different oxidizing agents taking part in the photodegradation of chlorophenols are given a bird eye view. The photocatalytic degradation mechanism of different chlorophenols over various photocatalyts has been discussed in more detail and elaborated that how different photocatalysts degrade the same chlorophenols with the aid of different oxidizing agents produced during photocatalysis. Finally, a future perspective has been given to deal with the effective removal of these hazardous pollutants from the environment.

Immobilization of MIL-88(Fe) anchored TiO2-chitosan(2D/2D) hybrid nanocomposite for the degradation of organophosphate pesticide: Characterization, mechanism and degradation intermediates

In this study, we have rationally designed and grafted a bio-assisted 2D/2D TiO₂/MIL-88(Fe) (TCS@MOF) heterojunction by growing granular TiO₂ on the surface of MIL-88(Fe) nanosheet, as hybrid photocatalyst. The hierarchical TCS@MOF composite was prepared via the one-pot solvothermal process and employed for monocrotophos (MCP) degradation under visible light region, since its persistent nature on soil and water causes major threat to the environment. The TCS@MOF promotes a number of packed high-speed nano-tunnels in the (p-n) heterojunctions, which significantly enhance the migration of photo-induced electrons (e^-) and holes (h⁺), respectively and thus limits the charge recombination of e^-s. The optimized photocatalyst achieves significant catalytic activity of ~98.79% for the degradation of MCP within 30 min of irradiation. The prominent oxidative radicals namely •OH, •O₂^- etc., were involved in the oxidation of organic pesticide. Besides, TCS@MOF exhibits outstanding stability even after five repetitive cycles for the oxidation of MCP with a negligible decrease in photo-activity. The proposed mechanism and oxidative pathways of MCP were rationally deduced in detail subject to experimental results. The mechanism renders insight into the oxidation and consequent bond rupture of pollutant as well as into the formation of products such as H₂O, CO₂, etc. This report unveils a novel architecture of proficiently optimized TCS@MOF material structure for the perceptive oxidation of organic contaminants.

Ag/AgCl@MIL-88A(Fe) heterojunction ternary composites: towards the photocatalytic degradation of organic pollutants

The efficient utilization of solar energy has received tremendous interest due to the increasing environmental and energy concerns. The present paper discusses the efficient integration of a plasmonic photocatalyst (Ag/AgCl) with an iron-based metal-organic framework (MIL-88A(Fe)) for boosting the visible light photoreactivity of MIL-88A(Fe). Two composites of Ag/AgCl@MIL-88A(Fe), namely MAG-1 and MAG-2 (stoichiometric ratio of Fe to Ag is 5 : 1 and 2 : 1), were successfully synthesized via facile in situ hydrothermal methods followed by UV reduction. The synthesized composite materials are characterized by FTIR, PXRD, UVDRS, PL, FESEM/EDX, TEM and BET analyses. The Ag/AgCl@MIL-88A(Fe) (MAG-2) hybrid system shows excellent photocatalytic activity for the degradation of p-nitrophenol (PNP), rhodamine B (RhB), and methylene blue (MB) under sunlight. We found that 91% degradation of PNP in 80 min, 99% degradation of RhB in 70 min and 94% degradation of MB in 70 min have taken place by using MAG-2 as a catalyst under sunlight. The superior activity of Ag/AgCl@MIL-88A(Fe) (MAG-2) is attributed to the synergistic effects from the surface plasmon resonance (SPR) of Ag NPs and the electron transfer from MIL-88A(Fe) to Ag nanoparticles for effective separation of electron-hole pairs. Furthermore, the mechanism of degradation of PNP, RhB and MB is proposed by analyzing the electron transfer pathway in Ag/AgCl@MIL-88A(Fe).