Shewanella secretes flavins that mediate extracellular electron transfer

Enhancing methanogenesis of anaerobic granular sludge by incorporating Fe/Fe oxides nanoparticles aided with biofilm disassembly agents and mediating redox activity of extracellular polymer substances

Anaerobic granular sludge (AGS) is a promising technology for organic wastewater treatment and energy recovery. In this study, three different kinds of Fe and Fe oxides nanoparticles (Fe₃O₄, Fe₂O₃ and ZVI) were tried to be incorporated into AGS through direct loading or aided with biofilm disassembly agents of norspermidine and D-tyrosine, which was aimed to enhance methane production capacity of AGS via increasing redox activity of extracellular polymer substance (EPS) and interspecies electron transfer. Despite the loading methods, incorporation of Fe and Fe oxides nanoparticles into AGS increased methane production capacity remarkably, with an enhancement of 36.49-85.17%, 20.37-204.95% and 189.71-243.32%, respectively, for the Fe₃O₄, Fe₂O₃ and ZVI loaded AGS. Pretreatment of AGS using biofilm disassembly agents helped to incorporate more Fe and Fe oxides into the inner structure of AGS, which further enhanced methane production capacity by 48.68% and 184.58%, respectively, for the Fe₃O₄ and Fe₂O₃ loaded AGS. Loading Fe and Fe oxides into AGS not only introduced exogenous conductive substances and Fe(III)/Fe(II) redox couples into EPS matrix of AGS, but also stimulated the production of redox active components of flavins and c-Cyts. All these factors may contribute to the reduced resistance of EPS, enhanced interspecies electron transfer and methane production capacity of AGS. This study provides a novel strategy and facile method to accelerate interspecies electron transfer and enhance methane production for matured AGS.

Improved membrane permeability with cetyltrimethylammonium bromide (CTAB) addition for enhanced bidirectional transport of substrate and electron shuttles

The effects of membrane permeability on extracellular electron transfer (EET) and performance of microbial fuel cell (MFC) need to be explored. In this work, cetyltrimethylammonium bromide (CTAB) was chosen to enhance the current generation and bidirectional transport of substrate and electron shuttles by tailoring the cell membrane permeability. Specifically, the peak currents of biofilms treated with CTAB especially at 200 μM were obviously higher than the control biofilm with no CTAB, and the riboflavin mediated electron transfer was promoted prominently. Biomass and viability analyses showed that an appropriate concentration of CTAB had almost no adverse effect on the cell viability of biofilm and could increase the biomass of biofilm. Measurements of the extracellular activity of alkaline phosphatase and UV-vis absorption confirmed the increased membrane permeability and the promoted efficiency of substrates transported into cells. This contribution paves the key step for facilitating EET process by adjusting membrane permeability through CTAB or other surfactants addition.

From manganese oxidation to water oxidation: assembly and evolution of the water-splitting complex in photosystem II

The manganese cluster of photosystem II has been the focus of intense research aiming to understand the mechanism of H₂O-oxidation. Great effort has also been applied to investigating its oxidative photoassembly process, termed photoactivation that involves the light-driven incorporation of metal ions into the active Mn₄CaO₅ cluster. The knowledge gained on these topics has fundamental scientific significance, but may also provide the blueprints for the development of biomimetic devices capable of splitting water for solar energy applications. Accordingly, synthetic chemical approaches inspired by the native Mn cluster are actively being explored, for which the native catalyst is a useful benchmark. For both the natural and artificial catalysts, the assembly process of incorporating Mn ions into catalytically active Mn oxide complexes is an oxidative process. In both cases this process appears to share certain chemical features, such as producing an optimal fraction of open coordination sites on the metals to facilitate the binding of substrate water, as well as the involvement of alkali metals (e.g., Ca²⁺) to facilitate assembly and activate water-splitting catalysis. This review discusses the structure and formation of the metal cluster of the PSII H₂O-oxidizing complex in the context of what is known about the formation and chemical properties of different Mn oxides. Additionally, the evolutionary origin of the Mn₄CaO₅ is considered in light of hypotheses that soluble Mn²⁺ was an ancient source of reductant for some early photosynthetic reaction centers ('photomanganotrophy'), and recent evidence that PSII can form Mn oxides with structural resemblance to the geologically abundant birnessite class of minerals. A new functional role for Ca²⁺ to facilitate sustained Mn²⁺ oxidation during photomanganotrophy is proposed, which may explain proposed physiological intermediates during the likely evolutionary transition from anoxygenic to oxygenic photosynthesis.

Engineering Shewanella carassii, a newly isolated exoelectrogen from activated sludge, to enhance methyl orange degradation and bioelectricity harvest

Electroactive microorganisms (EAMs) play important roles in biogeochemical redox processes and have been of great interest in the fields of energy recovery, waste treatment, and environmental remediation. However, the currently identified EAMs are difficult to be widely used in complex and diverse environments, due to the existence of poor electron transfer capability, weak environmental adaptability, and difficulty with engineering modifications, etc. Therefore, rapid and efficient screening of high performance EAMs from environments is an effective strategy to facilitate applications of microbial fuel cells (MFCs). In this study, to achieve efficient degradation of methyl orange (MO) by MFC and electricity harvest, a more efficient exoelectrogen Shewanella carassii-D₅ that belongs to Shewanella spp. was first isolated from activated sludge by WO₃ nanocluster probe technique. Physiological properties experiments confirmed that S. carassii-D₅ is a Gram-negative strain with rounded colonies and smooth, slightly reddish surface, which could survive in media containing lactate at 30 °C. Moreover, we found that S. carassii-D₅ exhibited remarkable MO degradation ability, which could degrade 66% of MO within 72 h, 1.7 times higher than that of Shewanella oneidensis MR-1. Electrochemical measurements showed that MFCs inoculated with S. carassii-D₅ could generate a maximum power density of 704.6 mW/m², which was 5.6 times higher than that of S. oneidensis MR-1. Further investigation of the extracellular electron transfer (EET) mechanism found that S. carassii-D₅ strain had high level of c-type cytochromes and strong biofilm formation ability compared with S. oneidensis MR-1, thus facilitating direct EET. Therefore, to enhance indirect electron transfer and MO degradation capacity, a synthetic gene cluster ribADEHC encoding riboflavin synthesis pathway from Bacillus subtilis was heterologously expressed in S. carassii-D₅, increasing riboflavin yield from 1.9 to 9.0 mg/g DCW with 1286.3 mW/m² power density output in lactate fed-MFCs. Furthermore, results showed that the high EET rate endowed a faster degradation efficient of MO from 66% to 86% with a maximum power density of 192.3 mW/m², which was 1.3 and 1.6 times higher than that of S. carassii-D₅, respectively. Our research suggests that screening and engineering high-efficient EAMs from sludge is a feasible strategy in treating organic pollutants.

Improved methane production with redox-active/conductive biochar amendment by establishing spatial ecological niche and mediating electron transfer

The multifunctional roles of biochar as an additive in improving the performance of anaerobic digestion (AD) has not been perfectly understood. In this study, the effects of different biochars on AD and the enhanced mechanisms were explored. The CH₄ productions were significantly improved with an increase of 45.9%, 28.3% and 16.5% by amendment with biochar pyrolyzed at 300℃ (BC300), 450℃ (BC450) and 600℃ (BC600), respectively. The tightly-bound communities were established on biochar at the initial stage of fermentation and functional microbes were selectively enriched/colonized in biochar-amended systems. Distinctive loosely-bound microbial communities were observed in BC300 and BC600 amended systems, among which electroactive Desulforhabdus and Clostridiales were the dominant bacteria. Biochar amendments also led to the formation of distinctive spatial ecological niches and the selection preference of microbes for specific spatial locations. These results provided new insights in revealing the potential mechanisms of enhanced AD performance by biochar amendment.

Agent-based modelling of iron cycling bacteria provides a framework for testing alternative environmental conditions and modes of action

Iron-reducing and iron-oxidizing bacteria are of interest in a variety of environmental and industrial applications. Such bacteria often co-occur at oxic-anoxic gradients in aquatic and terrestrial habitats. In this paper, we present the first computational agent-based model of microbial iron cycling, between the anaerobic ferric iron (Fe³⁺)-reducing bacteria Shewanella spp. and the microaerophilic ferrous iron (Fe²⁺)-oxidizing bacteria Sideroxydans spp. By including the key processes of reduction/oxidation, movement, adhesion, Fe²⁺-equilibration and nanoparticle formation, we derive a core model which enables hypothesis testing and prediction for different environmental conditions including temporal cycles of oxic and anoxic conditions. We compared (i) combinations of different Fe³⁺-reducing/Fe²⁺-oxidizing modes of action of the bacteria and (ii) system behaviour for different pH values. We predicted that the beneficial effect of a high number of iron-nanoparticles on the total Fe³⁺ reduction rate of the system is not only due to the faster reduction of these iron-nanoparticles, but also to the nanoparticles' additional capacity to bind Fe²⁺ on their surfaces. Efficient iron-nanoparticle reduction is confined to pH around 6, being twice as high than at pH 7, whereas at pH 5 negligible reduction takes place. Furthermore, in accordance with experimental evidence our model showed that shorter oxic/anoxic periods exhibit a faster increase of total Fe³⁺ reduction rate than longer periods.

Real-Time Monitoring of Dynamic Microbial Fe(III) Respiration Metabolism with a Living Cell-Compatible Electron-Sensing Probe

Monitoring microbial metabolism is vital for biomanufacturing processes optimization. However, it remains a grand challenge to offer insight into microbial metabolism due to particularly complex and dynamic processes. Here, we report an electron-sensing probe Zn₂ GeO₄ :Mn@Fe³⁺ for real-time and dynamic monitoring of Fe(III) respiration metabolism. The quenched persistent luminescence of Zn₂ GeO4:Mn@Fe³⁺ is recovered when Fe³⁺ accepted electrons from the dynamic Fe(III) respiration metabolism, enabling the real-time monitoring of microbial metabolism. The probe shows the capability to verify the role of related biomolecules in microbial Fe(III) respiration metabolism, to track the dynamic Fe(III) respiration metabolic response to environmental stress and microbial co-culture interactions. Furthermore, the Zn₂ GeO₄ :Mn@Fe³⁺ probe provides guidance for improving biosynthesis efficiency by monitoring Fe redox recycling in microbial co-culture.

Promoting biomethane production from propionate with Fe2O3@carbon nanotubes composites

Using a batch anaerobic system constructed with 60 mL serum bottles, potential of a composite material with Fe₂O₃ nanoparticles decorated on carbon nanotubes (CNTs) to enhance biomethane production was investigated. The composites (Fe₂O₃@CNTs) with well dispersed Fe₂O₃ nanoparticles (4.5 nm) were fabricated by a facile thermal decomposition method in a muffle furnace under nitrogen atmosphere. Compared with Fe₂O₃, Fe₂O₃@CNTs showed a large specific surface area and good electrical conductivity. Supplementation of Fe₂O₃@CNTs to the propionate-degrading enrichments enhanced the methane production rate, which was 10.4-fold higher than that in the control experiment without material addition. The addition of Fe₂O₃@CNTs also not only showed a clearly electrochemical response to flavin and cytochrome C, but also reduced the electron transfer resistance when compared to the control. Comparative analysis showed that Fe₂O₃ in Fe₂O₃@CNTs played a key role in initiating electrochemical response and triggering rapid methane production, while CNTs functioned as rapid electron conduits to facilitate electron transfer from iron-reducing bacteria (e.g., Acinetobacter, Syntrophomonas, and Geobacter) to methanogens (e.g. Methanosarcina).

Iodate Reduction by Shewanella oneidensis Requires Genes Encoding an Extracellular Dimethylsulfoxide Reductase

Microbial iodate (IO3 -) reduction is a major component of the iodine biogeochemical reaction network in anaerobic marine basins and radioactive iodine-contaminated subsurface environments. Alternative iodine remediation technologies include microbial reduction of IO3 - to iodide (I-) and microbial methylation of I- to volatile gases. The metal reduction pathway is required for anaerobic IO3 - respiration by the gammaproteobacterium Shewanella oneidensis. However, the terminal IO3 - reductase and additional enzymes involved in the S. oneidensis IO3 - electron transport chain have not yet been identified. In this study, gene deletion mutants deficient in four extracellular electron conduits (EECs; ΔmtrA, ΔmtrA-ΔmtrDEF, ΔmtrA-ΔdmsEF, ΔmtrA-ΔSO4360) and DMSO reductase (ΔdmsB) of S. oneidensis were constructed and examined for anaerobic IO3 - reduction activity with either 20 mM lactate or formate as an electron donor. IO3 - reduction rate experiments were conducted under anaerobic conditions in defined minimal medium amended with 250 μM IO3 - as anaerobic electron acceptor. Only the ΔmtrA mutant displayed a severe deficiency in IO3 - reduction activity with lactate as the electron donor, which suggested that the EEC-associated decaheme cytochrome was required for lactate-dependent IO3 - reduction. The ΔmtrA-ΔdmsEF triple mutant displayed a severe deficiency in IO3 - reduction activity with formate as the electron donor, whereas ΔmtrA-ΔmtrDEF and ΔmtrA-ΔSO4360 retained moderate IO3 - reduction activity, which suggested that the EEC-associated dimethylsulfoxide (DMSO) reductase membrane-spanning protein DmsE, but not MtrA, was required for formate-dependent IO3 - reduction. Furthermore, gene deletion mutant ΔdmsB (deficient in the extracellular terminal DMSO reductase protein DmsB) and wild-type cells grown with tungsten replacing molybdenum (a required co-factor for DmsA catalytic activity) in defined growth medium were unable to reduce IO3 - with either lactate or formate as the electron donor, which indicated that the DmsAB complex functions as an extracellular IO3 - terminal reductase for both electron donors. Results of this study provide complementary genetic and phenotypic evidence that the extracellular DMSO reductase complex DmsAB of S. oneidensis displays broad substrate specificity and reduces IO3 - as an alternate terminal electron acceptor.

Colonization of nasal cavities by Staphylococcus epidermidis mitigates SARS‐CoV‐2 nucleocapsid phosphoprotein‐induced interleukin (IL)‐6 in the lung

Infection by severe acute respiratory syndrome coronavirus 2 (SARS‐CoV‐2) can trigger excessive interleukin (IL)‐6 signalling, leading to a myriad of biological effects including a cytokine storm that contributes to multiple organ failure in severe coronavirus disease 2019 (COVID‐19). Using a mouse model, we demonstrated that nasal inoculation of nucleocapsid phosphoprotein (NPP) of SARS‐CoV‐2 increased IL‐6 content in bronchoalveolar lavage fluid (BALF). Nasal administration of liquid coco‐caprylate/caprate (LCC) onto Staphylococcus epidermidis (S. epidermidis)‐colonized mice significantly attenuated NPP‐induced IL‐6. Furthermore, S. epidermidis‐mediated LCC fermentation to generate electricity and butyric acid that promoted bacterial colonization and activated free fatty acid receptor 2 (Ffar2) respectively. Inhibition of Ffar2 impeded the effect of S. epidermidis plus LCC on the reduction of NPP‐induced IL‐6. Collectively, these results suggest that nasal S. epidermidis is part of the first line of defence in ameliorating a cytokine storm induced by airway infection of SARS‐CoV‐2.

Defined and unknown roles of conductive nanoparticles for the enhancement of microbial current generation: A review

The ability of various bacteria to make use of solid substrates through extracellular electron transfer (EET) or extracellular electron uptake (EEU) has enabled the development of valuable biotechnologies such as microbial fuel cells (MFCs) and microbial electrosynthesis (MES). It is common practice to use metallic and semiconductive nanoparticles (NPs) for microbial current enhancement. However, the effect of NPs is highly variable between systems, and there is no clear guideline for effectively increasing the current generation. In the present review, the proposed mechanisms for enhancing current production in MFCs and MES are summarized, and the critical factors for NPs to enhance microbial current generation are discussed. Implications for microbially induced iron corrosion, where iron sulfide NPs are proposed to enhance the rate of EEU, photochemically driven MES, and several future research directions to further enhance microbial current generation, are also discussed.

Solution-Deposited and Patternable Conductive Polymer Thin-Film Electrodes for Microbial Bioelectronics

Microbial bioelectronic devices integrate naturally occurring or synthetically engineered electroactive microbes with microelectronics. These devices have a broad range of potential applications, but engineering the biotic-abiotic interface for biocompatibility, adhesion, electron transfer, and maximum surface area remains a challenge. Prior approaches to interface modification lack simple processability, the ability to pattern the materials, and/or a significant enhancement in currents. Here, a novel conductive polymer coating that significantly enhances current densities relative to unmodified electrodes in microbial bioelectronics is reported. The coating is based on a blend of poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) crosslinked with poly(2-hydroxyethylacrylate) (PHEA) along with a thin polydopamine (PDA) layer for adhesion to an underlying indium tin oxide (ITO) electrode. When used as an interface layer with the current-producing bacterium Shewanella oneidensis MR-1, this material produces a 178-fold increase in the current density compared to unmodified electrodes, a current gain that is higher than previously reported thin-film 2D coatings and 3D conductive polymer coatings. The chemistry, morphology, and electronic properties of the coatings are characterized and the implementation of these coated electrodes for use in microbial fuel cells, multiplexed bioelectronic devices, and organic electrochemical transistor based microbial sensors are demonstrated. It is envisioned that this simple coating will advance the development of microbial bioelectronic devices.

Sb(III) resistance mechanism and oxidation characteristics of Klebsiella aerogenes X

Resistant bacteria are potential natural materials for the bioremediation of soil metalloid pollution. A strain isolated from farmland soil chronically exposed to Sb was identified as K. aerogenes X with high antimonite [Sb(III)] tolerance and oxidation ability. The resistance mechanism of K. aerogenes X and its extracellular polymeric substances (EPS), antioxidant enzymes, and oxidation characteristics in Sb(III) stress were investigated in this study by stress incubation experiments and FTIR. The biotoxicity of Sb was limited by the binding of the organic compounds in EPS, and the anionic functional groups (e.g., amino, carboxyl and hydroxyl groups, etc.) present in the cell envelope were the components primarily responsible for the metalloid-binding capability of K. aerogenes X. The K. aerogenes X can oxidize Sb(III), and its metabolites induce changes in reactive oxygen species (ROS), catalase (CAT), total superoxide dismutase (SOD) and glutathione s-transferase (GSH-S) activity, indicating that the resistance mechanisms of K. aerogenes X are mediated by oxidative stress, EPS restriction and cell damage. Oxidation of Sb(III) is driven by interactions in intracellular oxidation, cell electron transport, extracellular metabolism including proteins and low molecular weight components (LMWs). LMWs (molecular weight <3 kDa) are the main driving factor of Sb(III) oxidation. In addition, Sb resistance genes arsA, arsB, arsC, arsD and acr3 and potential oxidation gene arsH were identified in K. aerogenes X. Owing to its natural origin, high tolerance and oxidation ability, K. aerogenes X could serve as a potential bioremediation material for the mitigation of Sb(III) in contaminated areas.

Review on microbial fuel cells applications, developments and costs

The microbial fuel cell (MFC) technology has attracted significant attention in the last years due to its potential to recover energy in a wastewater treatment. The idea of using an MFC in industry is very attractive as the organic wastes can be converted into energy, reducing the waste disposal costs and the energy needs while increasing the company profit. However, taking aside these promising prospects, the attempts to apply MFCs in large-scale have not been succeeded so far since their lower performance and high costs remains challenging. This review intends to present the main applications of the MFC systems and its developments, particularly the advances on configuration and operating conditions. The diagnostic techniques used to evaluate the MFC performance as well as the different modeling approaches are described. Towards the introduction of the MFC in the market, a cost analysis is also included. The development of low-cost materials and more efficient systems, with high higher power outputs and durability, are crucial towards the application of MFCs in industrial/large scale. This work is a helpful tool for discovering new operation and design regimes.

Biological removal of sulfamethoxazole enhanced by S. oneidensis MR-1 via promoting NADH generation and electron transfer and consumption

The bio-removal efficiency of sulfamethoxazole (SMX) from wastewater is usually very poor. In this paper a new efficient method to biodegrade SMX was reported. The SMX biodegradation efficiency by Paracoccus denitrificans was observed to be remarkably enhanced from 48.9% to 94.2% after Shewanella oneidensis MR-1 addition. The mechanisms investigation revealed that P. denitrificans was the dominant microbe for SMX biodegradation. Although SMX biodegradation by S. oneidensis MR-1 alone was negligible, its presence advanced NADH generation. The proteomics assay revealed that the expression of key proteins relevant with complex I and III and cytochrome c in electron transfer chain were increased due to P. denitrificans acquiring iron from periplasm to cytoplasm being improved. In addition, the extracellular electron transfer capability was enhanced as S. oneidensis MR-1 not only produced flavin, but caused P. denitrificans to secret more extracellular polymeric substances. Further investigation indicated that the expression of key enzymes related to electron consumption in SMX biodegradation was up-regulated. Based on these findings, the pathways of S. oneidensis MR-1 promoting SMX biodegradation were proposed. As all nitrate could be removed with almost no nitrite accumulation, this study would also provide an attractive way for simultaneous bio-removal of multiple pollutants from wastewater.

Extracellular Electron Transfer by Pseudomonas aeruginosa in Biocorrosion: A Review

Microorganisms with extracellular electron transfer (EET) capability have gained significant attention for their different biotechnological applications, like biosensors, bioremediation, and microbial fuel cells. Current research affirmed that microbial EET potentially promotes corrosion of iron structures, termed microbiologically influenced corrosion (MIC). The sulfate-reducing (SRB) and nitrate-reducing (NRB) bacteria are the most investigated among the different MIC-promoting bacteria. Unlike extensively studied SRB corrosion, NRB corrosion has received less attention from researchers. Hence, this review focuses on EET by Pseudomonas aeruginosa, a pervasive bacterium competent for developing biofilms in marine habitats and oil pipelines. A comprehensive discussion on the fundamentals of EET mechanisms in MIC is provided first. After that, the review offers state-of-the-art insights into the latest research on the EET-assisted MIC by Pseudomonas aeruginosa. The role of electron transfer mediators has also been discussed to understand the mechanisms involved in a better way. This review will be beneficial to open up new opportunities for developing strategies for combating biocorrosion.

Overview of electroactive microorganisms and electron transfer mechanisms in microbial electrochemistry

Electroactive microorganisms acting as microbial electrocatalysts have intrinsic metabolisms that mediate a redox potential difference between solid electrodes and microbes, leading to spontaneous electron transfer to the electrode (exo-electron transfer) or electron uptake from the electrode (endo-electron transfer). These microbes biochemically convert various organic and/or inorganic compounds to electricity and/or biochemicals in bioelectrochemical systems (BESs) such as microbial fuel cells (MFCs) and microbial electrosynthesis cells (MECs). For the past two decades, intense studies have converged to clarify electron transfer mechanisms of electroactive microbes in BESs, which thereby have led to improved bioelectrochemical performance. Also, many novel exoelectrogenic eukaryotes as well as prokaryotes with electroactive properties are being continuously discovered. This review presents an overview of electroactive microorganisms (bacteria, microalgae and fungi) and their exo- and endo-electron transfer mechanisms in BESs for optimizing and advancing bioelectrochemical techniques.

Desulfovibrio vulgaris as a model microbe for the study of corrosion under sulfate-reducing conditions

Corrosion of iron-containing metals under sulfate-reducing conditions is an economically important problem. Microbial strains now known as Desulfovibrio vulgaris served as the model microbes in many of the foundational studies that developed existing models for the corrosion of iron-containing metals under sulfate-reducing conditions. Proposed mechanisms for corrosion by D. vulgaris include: (1) H2 consumption to accelerate the oxidation of Fe0 coupled to the reduction of protons to H2; (2) production of sulfide that combines with ferrous iron to form iron sulfide coatings that promote H2 production; (3) moribund cells release hydrogenases that catalyze Fe0 oxidation with the production of H2; (4) direct electron transfer from Fe0 to cells; and (5) flavins serving as an electron shuttle for electron transfer between Fe0 and cells. The demonstrated possibility of conducting transcriptomic and proteomic analysis of cells growing on metal surfaces suggests that similar studies on D. vulgaris corrosion biofilms can aid in identifying proteins that play an important role in corrosion. Tools for making targeted gene deletions in D. vulgaris are available for functional genetic studies. These approaches, coupled with instrumentation for the detection of low concentrations of H2, and proven techniques for evaluating putative electron shuttle function, are expected to make it possible to determine which of the proposed mechanisms for D. vulgaris corrosion are most important.

Effects of riboflavin and desferrioxamine B on Fe(II) oxidation by O2

Flavins and siderophores secreted by various plants, fungi and bacteria under iron (Fe) deficient conditions play important roles in the biogeochemical cycling of Fe in the environment. Although the mechanisms of flavin and siderophore mediated Fe(III) reduction and dissolution under anoxic conditions have been widely studied, the influence of these compounds on Fe(II) oxidation under oxic conditions is still unclear. In this study, we investigated the kinetics of aqueous Fe(II) (17.8 μM) oxidation by O2 at pH 5‒7 in the presence of riboflavin (oxidized (RBF) and reduced (RBFH2)) and desferrioxamine B (DFOB) as representative flavins and siderophores, respectively. Results showed that the addition of RBF/RBFH2 or DFOB markedly accelerates the oxidation of aqueous Fe(II) by O2. For instance, at pH 6, the rate of Fe(II) oxidation was enhanced 20‒70 times when 10 μM RBFH2 was added. The mechanisms responsible for the accelerated Fe(II) oxidation are related to the redox reactivity and complexation ability of RBFH2, RBF and DFOB. While RBFH2 does not readily complex Fe(II)/Fe(III), it can activate O2 and generate reactive oxygen species, which then rapidly oxidize Fe(II). In contrast, both RBF and DFOB do not reduce O2 but react with Fe(II) to form RBF/DFOB-complexed Fe(II), which in turn accelerates Fe(II) oxidation. Furthermore, the lower standard reduction potential of the Fe(II)-DFOB complex, compared to the Fe(II)-RBF complex, correlates with a higher oxidation rate constant for the Fe(II)-DFOB complex. Our study reveals an overlooked catalytic role of flavins and siderophores that may contribute to Fe(II)/Fe(III) cycling at oxic-anoxic interfaces.

Microbial Electrochemical Technologies for Sustainable Nitrogen Removal in Marine and Coastal Environments

For many years, the world’s coastal marine ecosystems have received industrial waste with high nitrogen concentrations, generating the eutrophication of these ecosystems. Different physicochemical-biological technologies have been developed to remove the nitrogen present in wastewater. However, conventional technologies have high operating costs and excessive production of brines or sludge which compromise the sustainability of the treatment. Microbial electrochemical technologies (METs) have begun to gain attention due to their cost-efficiency in removing nitrogen and organic matter using the metabolic capacity of microorganisms. This article combines a critical review of the environmental problems associated with the discharge of the excess nitrogen and the biological processes involved in its biogeochemical cycle; with a comparative analysis of conventional treatment technologies and METs especially designed for nitrogen removal. Finally, current METs limitations and perspectives as a sustainable nitrogen treatment alternative and efficient microbial enrichment techniques are included.

Electrochemical Microwell Plate to Study Electroactive Microorganisms in Parallel and Real-Time

Microbial resource mining of electroactive microorganism (EAM) is currently methodically hampered due to unavailable electrochemical screening tools. Here, we introduce an electrochemical microwell plate (ec-MP) composed of a 96 electrochemical deepwell plate and a recently developed 96-channel multipotentiostat. Using the ec-MP we investigated the electrochemical and metabolic properties of the EAM models Shewanella oneidensis and Geobacter sulfurreducens with acetate and lactate as electron donor combined with an individual genetic analysis of each well. Electrochemical cultivation of pure cultures achieved maximum current densities (j_max) and coulombic efficiencies (CE) that were well in line with literature data. The co-cultivation of S. oneidensis and G. sulfurreducens led to an increased current density of j_max of 88.57 ± 14.04 µA cm⁻² (lactate) and j_max of 99.36 ± 19.12 µA cm⁻² (lactate and acetate). Further, a decreased time period of reaching j_max and biphasic current production was revealed and the microbial electrochemical performance could be linked to the shift in the relative abundance.

Extracellular electron transfer increases fermentation in lactic acid bacteria via a hybrid metabolism

Energy conservation in microorganisms is classically categorized into respiration and fermentation; however, recent work shows some species can use mixed or alternative bioenergetic strategies. We explored the use of extracellular electron transfer for energy conservation in diverse lactic acid bacteria (LAB), microorganisms that mainly rely on fermentative metabolism and are important in food fermentations. The LAB Lactiplantibacillus plantarum uses extracellular electron transfer to increase its NAD⁺/NADH ratio, generate more ATP through substrate-level phosphorylation, and accumulate biomass more rapidly. This novel, hybrid metabolism is dependent on a type-II NADH dehydrogenase (Ndh2) and conditionally requires a flavin-binding extracellular lipoprotein (PplA) under laboratory conditions. It confers increased fermentation product yield, metabolic flux, and environmental acidification in laboratory media and during kale juice fermentation. The discovery of a single pathway that simultaneously blends features of fermentation and respiration in a primarily fermentative microorganism expands our knowledge of energy conservation and provides immediate biotechnology applications.

Bacteria produce the energy they need to live through two processes, respiration and fermentation. While respiration is often more energetically efficient, many bacteria rely on fermentation as their sole means of energy production. Respiration normally depends on the presence of small soluble molecules, such as oxygen, that can diffuse inside the cell, but some bacteria can use metals or other insoluble compounds found outside the cell to perform ‘extracellular electron transfer’.

Lactic acid bacteria are a large group of bacteria that have several industrial uses and live in many natural environments. These bacteria survive using fermentation, but they also carry a group of genes needed for extracellular electron transfer. It is unclear whether they use these genes for respiration or if they have a different purpose.

Tejedor-Sanz, Stevens et al. used a lactic acid bacterium called Lactiplantibacillus plantarum to study whether and how this group of bacteria use extracellular electron transfer. Analysis of L. plantarum and its effect on its surroundings showed that these bacteria use a hybrid process to produce energy: the cells use aspects of extracellular respiration to increase the yield and efficiency of fermentation. Combining these two approaches may allow L. plantarum to adapt to different environments and grow faster, allowing it to compete against other species.

Tejedor-Sanz, Stevens et al. provide new information on a widespread group of bacteria that are often used in food production and industry. The next step will be to understand how the hybrid system is controlled and how it varies among species. Understanding this process could result in new biotechnologies and foods that are healthier, produce less waste, or have different tastes and textures.

Wash-Free Amperometric Escherichia coli Detection via Rapid and Specific Proteolytic Cleavage by Its Outer Membrane OmpT

Various methods have been developed for the detection of Escherichia coli (E. coli); however, they are complex and time-consuming. OmpT─a cell membrane endopeptidase of E. coli─strongly embedded in the outer membrane of only E. coli, exposed to external solutions, with high proteolytic activity, could be a suitable target molecule for the rapid and straightforward detection of E. coli. Herein, a wash-free, sensitive, and selective amperometric method for E. coli detection, based on rapid and specific proteolytic cleavage by OmpT, has been reported. The method involved (i) rapid proteolytic cleavage of consecutive amino acids, after cleavage by OmpT, linked to an electrochemical species (4-aminophenol, AP), by leucine aminopeptidase (LAP, an exopeptidase), (ii) affinity binding of E. coli on an electrode, and (iii) electrochemical-enzymatic (EN) redox cycling. OmpT cleaved the intermediate peptide bond of a peptide substrate containing alanine-arginine-arginine-leucine-AP (-A-R-R-L-AP), forming R-L-AP, followed by the cleavage of two peptide bonds of R-L-AP sequentially by LAP, to liberate an electroactive AP. Affinity binding and EN redox cycling, in addition to rapid proteolytic cleavage by OmpT and LAP, enabled high electrochemical signal amplification. Two-sequential-cleavage was employed for the first time in protease-based detection. The calculated detection limit for E. coli cells in tap water (approximately 10³ CFU/mL after 1 h incubation) was lower than those obtained without affinity binding and EN redox cycling. The detection method was highly selective to E. coli as OmpT is present in only E. coli. High sensitivity, selectivity, and the absence of wash steps make the developed detection method practically promising.

Rapid differentiation of antibiotic-susceptible and -resistant bacteria through mediated extracellular electron transfer

Conventional methods for testing antibiotic susceptibility rely on bacterial growth on agar plates (diffusion assays) or in liquid culture (microdilution assays). These time-consuming assays use population growth as a proxy for cellular respiration. Herein we propose to use mediated extracellular electron transfer as a rapid and direct method to classify antibiotic-susceptible and -resistant bacteria. We tested antibiotics with diverse mechanisms of action (ciprofloxacin, imipenem, oxacillin, or tobramycin) with four important nosocomial pathogens (Acinetobacter baumannii, Staphylococcus aureus, Escherichia coli, and Klebsiella pneumoniae) by adding the bacterial culture to a custom-designed electrochemical cell with a glassy-carbon electrode and growth media supplemented with a soluble electron transfer mediator, phenazine methosulfate (PMS). During cell respiration, liberated electrons reduce PMS, which is then oxidized on the electrode surface, and current is recorded. Using this novel approach, we were able to consistently classify strains as antibiotic-resistant or -susceptible in <90 min for methodology development and <150 min for blinded tests.

Use of extracellular polymeric substances as natural redox mediators to enhance denitrification performance by accelerating electron transfer and carbon source metabolism

Extracellular polymeric substances (EPS) extracted from waste activated sludge were used as endogenous redox mediator to enhance denitrification performance. The nitrate reduction rate increased 1.42-fold when EPS were added at 75 mg C/L (C represents total organic carbon). EPS addition decreased the charge transfer resistance and improved the electron transport system activity. The nitrate reductase and nitrite reductase activities improved by 29.7% and 25.4%, respectively. The activation energy of the system with EPS addition (25.82 kJ/mol) was 31.1% lower than that of the control group (37.49 kJ/mol). Besides, EPS could be used as electron carriers to accelerate electron transport; its primary role was similar to that of the quinone loop in the electron transfer chain. More importantly, EPS addition enhanced carbon source metabolism, which increased the available nicotinamide adenine dinucleotide yield to 1.21 times that of the control group, and thus promoted the denitrification performance of activated sludge.

Conjugated Polyelectrolyte/Bacteria Living Composites in Carbon Paper for Biocurrent Generation

Successful practical implementation of bioelectrochemical systems requires developing affordable electrode structures that promote efficient electrical communication with microbes. Recent efforts have centered on immobilizing bacteria with organic semiconducting polymers on electrodes via electrochemical methods. This approach creates a fixed biocomposite that takes advantage of the increased electrode's electroactive surface area (EASA). Here, we demonstrate that a biocomposite comprising the water-soluble conjugated polyelectrolyte CPE-K and electrogenic Shewanella oneidensis MR-1 can self-assemble with carbon paper electrodes, thereby increasing its biocurrent extraction by ∼ 6-fold over control biofilms. A ∼ 1.5-fold increment in biocurrent extraction was obtained for the biocomposite on carbon paper relative to the biocurrent extracted from gold-coated counterparts. Electrochemical characterization revealed that the biocomposite stabilized with the carbon paper more quickly than atop flat gold electrodes. Cross-sectional images show that the biocomposite infiltrates inhomogeneously into the porous carbon structure. Despite an incomplete penetration, the biocomposite can take advantage of the large EASA of the electrode via long-range electron transport. These results show that previous success on gold electrode platforms can be improved when using more commercially viable and easily manipulated electrode materials. This article is protected by copyright. All rights reserved.

Different performance of pyrene biodegradation on metal-modified montmorillonite: Role of surface metal ions from a bioelectrochemical perspective

Microbial extracellular electron transfer (EET) at microbe-mineral interface has been reported to play a significant role in pollutant biotransformation. Different metals often co-exist with organic pollutants and are immobilized on mineral surfaces. However, little is known about the influence of mineral surface metal ions on organic pollutant biodegradation and the involved electron transfer mechanism. To address this knowledge gap, pyrene was used as a model compound to investigate the biodegradation of polycyclic aromatic hydrocarbon on montmorillonite mineral saturated with metal ions (Na(I), Ni(II), Co(II), Cu(II) and Fe(III)) by Mycobacteria strain NJS-1. Further, the possible underlying electron transfer mechanism by electrochemical approaches was investigated. The results show that pyrene biodegradation on montmorillonite was markedly influenced by surface metal ions, with degradation efficiency following the order Fe(III) > Na(I) ≈ Co(II) > Ni(II) ≈ Cu(II). Bioelectrochemical analysis showed that electron transfer activities (i.e., electron donating capacity and electron transport system activity) varied in different metal-modified montmorillonites and were closely related to pyrene biodegradation. Fe(III) modification greatly stimulated degrading enzyme activities (i.e., peroxidase and dioxygenase) and electron transfer activities resulting in enhanced pyrene biodegradation, which highlights its potential as a technique for pollutant bioremediation. The bacterial extracellular protein and humic substances played important roles in EET processes. Membrane-bound cytochrome C protein and extracellular riboflavin were identified as the electron shuttles responsible for transmembrane and cross extracellular matrix electron transfer, respectively. Additions of exogenetic electron mediators of riboflavin, humic acid and potassium ferricyanide accelerated pyrene biodegradation which further verified the critical role of EET in PAH transformation at bacteria-mineral interfaces. These results support the development of clay mineral based advanced bioremediation techniques through regulating the electron transfer processes at the microbe-mineral interfaces by mineral surface modification.

Thermodynamic controls on rates of iron oxide reduction by extracellular electron shuttles

Anaerobic microbial respiration in suboxic and anoxic environments often involves particulate ferric iron (oxyhydr-)oxides as terminal electron acceptors. To ensure efficient respiration, a widespread strategy among iron-reducing microorganisms is the use of extracellular electron shuttles (EES) that transfer two electrons from the microbial cell to the iron oxide surface. Yet, a fundamental understanding of how EES-oxide redox thermodynamics affect rates of iron oxide reduction remains elusive. Attempts to rationalize these rates for different EES, solution pH, and iron oxides on the basis of the underlying reaction free energy of the two-electron transfer were unsuccessful. Here, we demonstrate that broadly varying reduction rates determined in this work for different iron oxides and EES at varying solution chemistry as well as previously published data can be reconciled when these rates are instead related to the free energy of the less exergonic (or even endergonic) first of the two electron transfers from the fully, two-electron reduced EES to ferric iron oxide. We show how free energy relationships aid in identifying controls on microbial iron oxide reduction by EES, thereby advancing a more fundamental understanding of anaerobic respiration using iron oxides.

Sulfate differentially stimulates but is not respired by diverse anaerobic methanotrophic archaea

Sulfate-coupled anaerobic oxidation of methane (AOM) is a major methane sink in marine sediments. Multiple lineages of anaerobic methanotrophic archaea (ANME) often coexist in sediments and catalyze this process syntrophically with sulfate-reducing bacteria (SRB), but the potential differences in ANME ecophysiology and mechanisms of syntrophy remain unresolved. A humic acid analog, anthraquinone 2,6-disulfonate (AQDS), could decouple archaeal methanotrophy from bacterial sulfate reduction and serve as the terminal electron acceptor for AOM (AQDS-coupled AOM). Here in sediment microcosm experiments, we examined variations in physiological response between two co-occurring ANME-2 families (ANME-2a and ANME-2c) and tested the hypothesis of sulfate respiration by ANME-2. Sulfate concentrations as low as 100 µM increased AQDS-coupled AOM nearly 2-fold matching the rates of sulfate-coupled AOM. However, the SRB partners remained inactive in microcosms with sulfate and AQDS and neither ANME-2 families respired sulfate, as shown by their cellular sulfur contents and anabolic activities measured using nanoscale secondary ion mass spectrometry. ANME-2a anabolic activity was significantly higher than ANME-2c, suggesting that ANME-2a was primarily responsible for the observed sulfate stimulation of AQDS-coupled AOM. Comparative transcriptomics showed significant upregulation of ANME-2a transcripts linked to multiple ABC transporters and downregulation of central carbon metabolism during AQDS-coupled AOM compared to sulfate-coupled AOM. Surprisingly, genes involved in sulfur anabolism were not differentially expressed during AQDS-coupled AOM with and without sulfate amendment. Collectively, this data indicates that ANME-2 archaea are incapable of respiring sulfate, but sulfate availability differentially stimulates the growth and AOM activity of different ANME lineages.

Flavin mononucleotide-stimulated microbial fuel cell for efficient gaseous toluene abatement

Chemical park is regarded as a major contributor of VOCs emissions in China. Currently, a green and safe technology, microbial fuel cells (MFCs), is being developed for the VOCs abatement. Noting that effective electron transfer is critical to the MFC performance. In this work, flavin mononucleotide (FMN) was dosed as an electron shuttle to improve the removal of the typical toxic VOCs, toluene. The experimental results revealed that the performance of toluene removal and power generation were accelerated with the dosage of 0.2-2 μM FMN. With the addition of 1 μM FMN, the removal efficiency, the maximum output voltage and the coulombic efficiency of MFC were increased by 18.4%, 64.4% and 56.3%, respectively. However, a further increase in FMN concentration to 2 μM caused a reduction in the removal efficiency and coulombic efficiency. The images of scanning electron microscopy and confocal laser scanning microscopy showed that the presence of FMN greatly promoted the microbial growth and its activity. Furthermore, microbial community analysis also implied that the moderate dosage of FMN (0.2-1 μM) was beneficial for the growth of the typical exoelectrogens, Geobacter sp., and thus the coulombic efficiency was increased. In addition, an electron transfer pathway involving in cytochrome b, OMCs, cytochrome c, and MtrA was proposed based on the cyclic voltammetry analysis. This work will provide a fundamental theoretical support for its application of toxic VOCs abatement from the chemical park.

Bio-electrochemical frameworks governing microbial fuel cell performance: technical bottlenecks and proposed solutions

Microbial fuel cells (MFCs) are recognized as a future technology with a unique ability to exploit metabolic activities of living microorganisms for simultaneous conversion of chemical energy into electrical energy. This technology holds the promise to offer sustained innovations and continuous development towards many different applications and value-added production that extends beyond electricity generation, such as water desalination, wastewater treatment, heavy metal removal, bio-hydrogen production, volatile fatty acid production and biosensors. Despite these advantages, MFCs still face technical challenges in terms of low power and current density, limiting their use to powering only small-scale devices. Description of some of these challenges and their proposed solutions is demanded if MFCs are applied on a large or commercial scale. On the other hand, the slow oxygen reduction process (ORR) in the cathodic compartment is a major roadblock in the commercialization of fuel cells for energy conversion. Thus, the scope of this review article addresses the main technical challenges of MFC operation and provides different practical approaches based on different attempts reported over the years.

Sustainable operation requires addressing key MFC-bottleneck issues. Enhancing extracellular electron transfer is the key to elevated MFC performance.

Recent advancements in microbial fuel cells: A review on its electron transfer mechanisms, microbial community, types of substrates and design for bio-electrochemical treatment

The development in urbanization, growth in industrialization and deficiency in crude oil wealth has made to focus more for the renewable and also sustainable spotless energy resources. In the past two decades, the concepts of microbial fuel cell have caught more considerations among the scientific societies for the probability of converting, organic waste materials into bio-energy using microorganisms catalyzed anode, and enzymatic/microbial/abiotic/biotic cathode electro-chemical reactions. The added benefit with MFCs technology for waste water treatment is numerous bio-centered processes are available such as sulfate removal, denitrification, nitrification, removal of chemical oxygen demand and biological oxygen demand and heavy metals removal can be performed in the same MFC designed systems. The various factors intricate in MFC concepts in the direction of bioenergy production consists of maximum coulombic efficiency, power density and also the rate of removal of chemical oxygen demand which calculates the efficacy of the MFC unit. Even though the efficacy of MFCs in bioenergy production was initially quietly low, therefore to overcome these issues few modifications are incorporated in design and components of the MFC units, thereby functioning of the MFC unit have improvised the rate of bioenergy production to a substantial level by this means empowering application of MFC technology in numerous sectors including carbon capture, bio-hydrogen production, bioremediation, biosensors, desalination, and wastewater treatment. The present article reviews about the microbial community, types of substrates and information about the several designs of MFCs in an endeavor to get the better of practical difficulties of the MFC technology.

Biofilm Biology and Engineering of Geobacter and Shewanella spp. for Energy Applications

Geobacter and Shewanella spp. were discovered in late 1980s as dissimilatory metal-reducing microorganisms that can transfer electrons from cytoplasmic respiratory oxidation reactions to external metal-containing minerals. In addition to mineral-based electron acceptors, Geobacter and Shewanella spp. also can transfer electrons to electrodes. The microorganisms that have abilities to transfer electrons to electrodes are known as exoelectrogens. Because of their remarkable abilities of electron transfer, Geobacter and Shewanella spp. have been the two most well studied groups of exoelectrogens. They are widely used in bioelectrochemical systems (BESs) for various biotechnological applications, such as bioelectricity generation via microbial fuel cells. These applications mostly associate with Geobacter and Shewanella biofilms grown on the surfaces of electrodes. Geobacter and Shewanella biofilms are electrically conductive, which is conferred by matrix-associated electroactive components such as c-type cytochromes and electrically conductive nanowires. The thickness and electroactivity of Geobacter and Shewanella biofilms have a significant impact on electron transfer efficiency in BESs. In this review, we first briefly discuss the roles of planktonic and biofilm-forming Geobacter and Shewanella cells in BESs, and then review biofilm biology with the focus on biofilm development, biofilm matrix, heterogeneity in biofilm and signaling regulatory systems mediating formation of Geobacter and Shewanella biofilms. Finally, we discuss strategies of Geobacter and Shewanella biofilm engineering for improving electron transfer efficiency to obtain enhanced BES performance.

Electrochemical and spectroelectrochemical characterization of bacteria and bacterial systems

Microbes, such as bacteria, can be described, at one level, as small, self-sustaining chemical factories. Based on the species, strain, and even the environment, bacteria can be useful, neutral or pathogenic to human life, so it is increasingly important that we be able to characterize them at the molecular level with chemical specificity and spatial and temporal resolution in order to understand their behavior. Bacterial metabolism involves a large number of internal and external electron transfer processes, so it is logical that electrochemical techniques have been employed to investigate these bacterial metabolites. In this mini-review, we focus on electrochemical and spectroelectrochemical methods that have been developed and used specifically to chemically characterize bacteria and their behavior. First, we discuss the latest mechanistic insights and current understanding of microbial electron transfer, including both direct and mediated electron transfer. Second, we summarize progress on approaches to spatiotemporal characterization of secreted factors, including both metabolites and signaling molecules, which can be used to discern how natural or external factors can alter metabolic states of bacterial cells and change either their individual or collective behavior. Finally, we address in situ methods of single-cell characterization, which can uncover how heterogeneity in cell behavior is reflected in the behavior and properties of collections of bacteria, e.g. bacterial communities. Recent advances in (spectro)electrochemical characterization of bacteria have yielded important new insights both at the ensemble and the single-entity levels, which are furthering our understanding of bacterial behavior. These insights, in turn, promise to benefit applications ranging from biosensors to the use of bacteria in bacteria-based bioenergy generation and storage.

Interspecific competition by non-exoelectrogenic Citrobacter freundii An1 boosts bioelectricity generation of exoelectrogenic Shewanella oneidensis MR-1

The performance of bioelectrochemical systems (BESs) is significantly influenced by metabolic interactions within a particular microbial community. Although some studies show that interspecific metabolic cooperation benefits BESs performance, the effect of interspecific substrate competition on BESs performance has not yet been discussed. Herein, the impact of interspecific competition is investigated by monitoring the extracellular electron transfer of exoelectrogenic Shewanella oneidensis MR-1 and non-exoelectrogenic Citrobacter freundii An1 alone and simultaneously. The bacterial consortia generate the highest current of 38.4 μA cm^-2, 6 times of that produced by the single strain S. oneidensis MR-1. Though S. oneidensis MR-1 loses out to C. freundii An1 in solution, the competition enhances the metabolic activity of S. oneidensis MR-1 on electrode, which facilitates the biofilm formation and therefore helps S. oneidensis MR-1 to gain an competitive advantage over C. freundii An1. Increased metabolic activity triggers more electrons generation and flavin secretion of S. oneidensis MR-1 which contributes to its excellent exoelectrogenic capacity. The proteomics analysis confirms that the expression of proteins related to lactate metabolism, biofilm formation, and outer membrane c-type cytochromes are significantly upregulated in S. oneidensis MR-1 from bacterial consortia.

Extracellular Electron Exchange Capabilities of Desulfovibrio ferrophilus and Desulfopila corrodens

Microbial extracellular electron transfer plays an important role in diverse biogeochemical cycles, metal corrosion, bioelectrochemical technologies, and anaerobic digestion. Evaluation of electron uptake from pure Fe(0) and stainless steel indicated that, in contrast to previous speculation in the literature, Desulfovibrio ferrophilus and Desulfopila corrodens are not able to directly extract electrons from solid-phase electron-donating surfaces. D. ferrophilus grew with Fe(III) as the electron acceptor, but Dp. corrodens did not. D. ferrophilus reduced Fe(III) oxide occluded within porous alginate beads, suggesting that it released a soluble electron shuttle to promote Fe(III) oxide reduction. Conductive atomic force microscopy revealed that the D. ferrophilus pili are electrically conductive and the expression of a gene encoding an aromatics-rich putative pilin was upregulated during growth on Fe(III) oxide. The expression of genes for multi-heme c-type cytochromes was not upregulated during growth with Fe(III) as the electron acceptor, and genes for a porin-cytochrome conduit across the outer membrane were not apparent in the genome. The results suggest that D. ferrophilus has adopted a novel combination of strategies to enable extracellular electron transport, which may be of biogeochemical and technological significance.

Recent Progress and Prospects in Catalytic Water Treatment

Presently, conventional technologies in water treatment are not efficient enough to completely mineralize refractory water contaminants. In this context, the implementation of catalytic processes could be an alternative. Despite the advantages provided in terms of kinetics of transformation, selectivity, and energy saving, numerous attempts have not yet led to implementation at an industrial scale. This review examines investigations at different scales for which controversies and limitations must be solved to bridge the gap between fundamentals and practical developments. Particular attention has been paid to the development of solar-driven catalytic technologies and some other emerging processes, such as microwave assisted catalysis, plasma-catalytic processes, or biocatalytic remediation, taking into account their specific advantages and the drawbacks. Challenges for which a better understanding related to the complexity of the systems and the coexistence of various solid-liquid-gas interfaces have been identified.

Microbial fuel cells and their electrified biofilms

Bioelectrochemical systems (BES) represent a wide range of different biofilm-based bioreactors that includes microbial fuel cells (MFCs), microbial electrolysis cells (MECs) and microbial desalination cells (MDCs). The first described bioelectrical bioreactor is the Microbial Fuel Cell and with the exception of MDCs, it is the only type of BES that actually produces harvestable amounts of electricity, rather than requiring an electrical input to function. For these reasons, this review article, with previously unpublished supporting data, focusses primarily on MFCs. Of relevance is the architecture of these bioreactors, the type of membrane they employ (if any) for separating the chambers along with the size, as well as the geometry and material composition of the electrodes which support biofilms. Finally, the structure, properties and growth rate of the microbial biofilms colonising anodic electrodes, are of critical importance for rendering these devices, functional living 'engines' for a wide range of applications.

Anaerobic oxidation of methane mediated by microbial extracellular respiration

Anaerobic oxidation of methane (AOM) can be microbially mediated by the reduction of different terminal electron acceptors. AOM coupled to reduction of sulfate, manganese/iron oxides, humic substances, selenate, arsenic and other artificial extracellular electron acceptors are recognized as processes associated with microbial extracellular respiration. In these processes, methane-oxidizing archaea transfer electrons to external electron acceptors or to interdependent microbial species, which are mechanistically dependent on versatile extracellular electron transfer (EET) pathways. This review compiles recent progress in the research of electromicrobiology of AOM based on the catalogue of different electron acceptors. Naturally distributed and artificially constructed EET-mediated AOM is summarized, with the discussion of their environmental importance and application potentials. The diversity of responsible microorganisms involved in EET-mediated AOM is discussed with both methane-oxidizing archaea and their putative bacterial partners. More importantly, the review highlights progress and deficiencies in our understanding of EET pathways in EET-mediated AOM, raising open research questions for future research.

Engineering Wired Life: Synthetic Biology for Electroactive Bacteria

Electroactive bacteria produce or consume electrical current by moving electrons to and from extracellular acceptors and donors. This specialized process, known as extracellular electron transfer, relies on pathways composed of redox active proteins and biomolecules and has enabled technologies ranging from harvesting energy on the sea floor, to chemical sensing, to carbon capture. Harnessing and controlling extracellular electron transfer pathways using bioengineering and synthetic biology promises to heighten the limits of established technologies and open doors to new possibilities. In this review, we provide an overview of recent advancements in genetic tools for manipulating native electroactive bacteria to control extracellular electron transfer. After reviewing electron transfer pathways in natively electroactive organisms, we examine lessons learned from the introduction of extracellular electron transfer pathways into Escherichia coli. We conclude by presenting challenges to future efforts and give examples of opportunities to bioengineer microbes for electrochemical applications.

Plant endophytic bacteria: A potential resource pool of electroactive micro-organisms

AIMS

Electroactive micro-organisms play a significant role in microbial fuel cells. It is necessary to discover potential resources in plant endophytes. In this study, plant tissues were selected to isolate endophytic bacteria, and the electrochemical activity potential was evaluated.

METHODS AND RESULTS

The microbial fuel cell (MFC) is used to evaluate the electricity-producing activity of endophytic bacteria in plant tissues, and the species distribution of micro-organisms in the anode of the MFC after inoculation of plant tissues is determined by high-throughput sequencing. Twenty-six strains of bacteria were isolated from plant tissues belonging to Angelica and Sweet Potato, of which 17 strains from six genera had electrochemical activity, including Bacillus sp., Pleomorphomonas sp., Rahnella sp., Shinella sp., Paenibacillus sp. and Staphylococcus sp. Moreover, the electricity-producing micro-organisms in the plant tissue are enriched. Pseudomonas and Clostridioides are the dominant genera of MFC anode inoculated with angelica tissue. Staphylococcus and Lachnoclostridium are the dominant genera in MFC anode inoculated with sweet potato tissue. And the most representative Gram-positive strain Staphylococcus succinus subsp. succinus H6 and plant tissue were further analysed for electrochemical activity. And a strain numbered H6 and plant tissue had a good electrogenerating activity.

CONCLUSION

This study is of great significance for expanding the resource pool of electricity-producing micro-organisms and tapping the potential of plant endophytes for electricity-producing.

SIGNIFICANCE AND IMPACT OF STUDY

This is the first study to apply plant endophytes to MFC to explore the characteristics of electricity production. It is of great significance for exploring the diversity of plant endophytes and the relationship between electricity producing bacteria and plants.