In vitro selection and characterization of a highly efficient Zn(II)-dependent RNA-cleaving deoxyribozyme

Transforming the blood glucose meter into a general healthcare meter for in vitro diagnostics in mobile health

Recent advances in mobile network and smartphones have provided an enormous opportunity for transforming in vitro diagnostics (IVD) from central labs to home or other points of care (POC). A major challenge to achieving the goal is a long time and high costs associated with developing POC IVD devices in mobile Health (mHealth). Instead of developing a new POC device for every new IVD target, we and others are taking advantage of decades of research, development, engineering and continuous improvement of the blood glucose meter (BGM), including those already integrated with smartphones, and transforming the BGM into a general healthcare meter for POC IVDs of a wide range of biomarkers, therapeutic drugs and other analytical targets. In this review, we summarize methods to transduce and amplify selective binding of targets by antibodies, DNA/RNA aptamers, DNAzyme/ribozymes and protein enzymes into signals such as glucose or NADH that can be measured by commercially available BGM, making it possible to adapt many clinical assays performed in central labs, such as immunoassays, aptamer/DNAzyme assays, molecular diagnostic assays, and enzymatic activity assays onto BGM platform for quantification of non-glucose targets for a wide variety of IVDs in mHealth.

Biochemical and Biophysical Understanding of Metal Ion Selectivity of DNAzymes

This review summarizes research into the metal-binding properties of catalytic DNAzymes, towards the goal of understanding the structural properties leading to metal ion specificity. Progress made and insight gained from a range of biochemical and biophysical techniques are covered, and promising directions for future investigations are discussed.

In Vitro Selection of a DNAzyme Cooperatively Binding Two Lanthanide Ions for RNA Cleavage

Trivalent lanthanide ions (Ln(3+)) were recently employed to select RNA-cleaving DNAzymes, and three new DNAzymes have been reported so far. In this work, dysprosium (Dy(3+)) was used with a library containing 50 random nucleotides. After six rounds of in vitro selection, a new DNAzyme named Dy10a was obtained and characterized. Dy10a has a bulged hairpin structure cleaving a RNA/DNA chimeric substrate. Dy10a is highly active in the presence of the five Ln(3+) ions in the middle of the lanthanide series (Sm(3+), Eu(3+), Gd(3+), Tb(3+), and Dy(3+)), while its activity descends on the two sides. The cleavage rate reaches 0.6 min(-1) at pH 6 with just 200 nM Sm(3+), which is the fastest among all known Ln(3+)-dependent enzymes. Dy10a binds two Ln(3+) ions cooperatively. When a phosphorothioate (PS) modification is introduced at the cleavage junction, the activity decreases by >2500-fold for both the Rp and Sp diastereomers, and thiophilic Cd(2+) cannot rescue the activity. The pH-rate profile has a slope of 0.37 between pH 4.2 and 5.2, and the slope was even lower at higher pH. On the basis of these data, a model of metal binding is proposed. Finally, a catalytic beacon sensor that can detect Ho(3+) down to 1.7 nM is constructed.

A Targeted DNAzyme-Nanocomposite Probe Equipped with Built-in Zn(2+) Arsenal for Combined Treatment of Gene Regulation and Drug Delivery

As catalytic nucleic acids, DNAzymes have been extensively used in the design of sensing platforms. However, their potentials as intelligent drug carriers for responsive drug release in gene therapy and chemotherapy were rarely explored. Herein, we report a dual-functional probe composed of gold nanoparticles (GNPs), catalytic Zn(2+)-dependent DNAzyme, anticancer drug doxorubicin (Dox), targeted AS1411 aptamer and acid-decomposable ZnO quantum dots (ZnO QDs) to achieve intracellular gene regulation and drug delivery in a controlled manner. By means of aptamer-guided targeting and receptor-mediated endocytosis, the probes were specifically internalized into the HeLa cells and trapped in the acidic endo-/lysosomes, where the ZnO QDs as the built-in Zn(2+) arsenal were promptly dissolved to offer Zn(2+), leading to the activation of DNAzyme to cleave the substrate strands, and subsequent drug release. Meanwhile, as designed, one part of the cleaved substrate, hybridized with the overexpressed miR-21 in the target cells, thereby declining its intracellular level. Taken together, the down-regulation of miR-21 has a synergistic effect with Dox to efficiently eradicate the cancer cells. Thus, the favorable biocompatibility, cancer cell specificity and combined treatment make the probe promising for therapy of multidrug-resistant cancer and in vivo application.

Functional nucleic acid-based hydrogels for bioanalytical and biomedical applications

Hydrogels are crosslinked hydrophilic polymers that can absorb a large amount of water. By their hydrophilic, biocompatible and highly tunable nature, hydrogels can be tailored for applications in bioanalysis and biomedicine. Of particular interest are DNA-based hydrogels owing to the unique features of nucleic acids. Since the discovery of the DNA double helical structure, interest in DNA has expanded beyond its genetic role to applications in nanotechnology and materials science. In particular, DNA-based hydrogels present such remarkable features as stability, flexibility, precise programmability, stimuli-responsive DNA conformations, facile synthesis and modification. Moreover, functional nucleic acids (FNAs) have allowed the construction of hydrogels based on aptamers, DNAzymes, i-motif nanostructures, siRNAs and CpG oligodeoxynucleotides to provide additional molecular recognition, catalytic activities and therapeutic potential, making them key players in biological analysis and biomedical applications. To date, a variety of applications have been demonstrated with FNA-based hydrogels, including biosensing, environmental analysis, controlled drug release, cell adhesion and targeted cancer therapy. In this review, we focus on advances in the development of FNA-based hydrogels, which have fully incorporated both the unique features of FNAs and DNA-based hydrogels. We first introduce different strategies for constructing DNA-based hydrogels. Subsequently, various types of FNAs and the most recent developments of FNA-based hydrogels for bioanalytical and biomedical applications are described with some selected examples. Finally, the review provides an insight into the remaining challenges and future perspectives of FNA-based hydrogels.

An Ultrasensitive Light-up Cu(2+) Biosensor Using a New DNAzyme Cleaving a Phosphorothioate-Modified Substrate

Cu(2+) is a very important metal ion in biology, environmental science, and industry. Developing biosensors for Cu(2+) is a key topic in analytical chemistry. DNAzyme-based sensors are highly attractive for their excellent sensitivity, stability, and programmability. In the past decade, a few Cu(2+) biosensors were reported using DNAzymes with DNA cleavage or DNA ligation activity. However, they require unstable ascorbate or imidazole activation. So far, no RNA-cleaving DNAzymes specific for Cu(2+) are known. In this work, a phosphorothioate (PS) RNA-containing library was used for in vitro selection, and a few new Cu(2+)-specific RNA-cleaving DNAzymes were isolated. Among them, a DNAzyme named PSCu10 was studied further. It has only eight nucleotides in the enzyme loop with a cleavage rate of 0.1 min(-1) in the presence of 1 μM Cu(2+) at pH 6.0 (its optimal pH). Between the two diastereomers of the PS RNA chiral center, the R(p) isomer is 37 times more active than the S(p) one. Among the other divalent metal ions, only Hg(2+) can cleave the substrate due to its extremely high thiophilicity. A catalytic beacon sensor was designed with a detection limit of 1.6 nM Cu(2+) and extremely high selectivity. PSCu10 is specific for Cu(2+), and it has no cleavage in the presence of ascorbate, which reduces Cu(2+) to Cu(+).

Postsynthetic Modification of DNA Phosphodiester Backbone for Photocaged DNAzyme

Photocaged (photoactivatable) biomolecules are powerful tools for noninvasive control of biochemical activities by light irradiation. DNAzymes (deoxyribozymes) are single-stranded oligonucleotides with a broad range of enzymatic activities. In this work, to construct photocaged DNAzymes, we developed a facile and mild postsynthetic method to incorporate an interesting photolabile modification (thioether-enol phosphate, phenol substituted, TEEP-OH) into readily available phosphorothioate DNA. Upon light irradiation, TEEP-OH transformed into a native DNA phosphodiester, and accordingly the DNAzymes with RNA-cleaving activities were turned "on" from its inactive and caged form. Activation of the TEEP-OH-caged DNAzyme by light was also successful inside live cells.

In vitro selection of deoxyribozymes active with Cd(2+) ions resulting in variants of DNAzyme 8-17

In vitro selection was performed to search for RNA-cleaving DNAzymes catalytically active with Cd(2+) ions from the oligonucleotide combinatorial library with a 23-nucleotide random region. All the selected, catalytically active variants turned out to belong to the 8-17 type DNAzyme. Three DNAzymes were prepared in shortened, cis-acting versions which were subjected to a detailed study of the kinetic properties and metal ion preferences. Although the selection protocol was designed for Cd(2+)-dependent DNAzymes, the variants showed broader metal ion specificity. They preferred Cd(2+) but were also active with Mn(2+) and Zn(2+), suggesting that binding of the catalytic ion does not require an extremely specific coordination pattern. The unexpected decrease of the catalytic activity of the variants along with the temperature increase suggested that some changes occurred in their structures or the rate-limiting step of the reaction was changed. Two elements of the catalytic core of DNAzyme 1/VIIWS, the nucleotide at position 12 and the three-base-pair hairpin motif, were mutated. The presence of a purine residue at position 12 was crucial for the catalytic activity but the changes at that position had a relatively small influence on the metal ion preferences of this variant. The middle base pair of the three-base-pair hairpin was changed from A-T to C-G interaction. The catalytic activity of the mutated variant was increased with Zn(2+), decreased with Mn(2+), and was not changed in the presence of Cd(2+) ions. Clearly, this base pair was important for defining the metal ion preferences of the DNAzyme 1/VIIWS.

A cupric ion triggered DNA diode based on a tandem linkage–cleavage reaction

A novel DNA functional element, a DNA diode, was developed based on a tandem linkage–cleavage process consisting of click chemistry and DNAzyme.

A DNAzyme requiring two different metal ions at two distinct sites

Most previously reported RNA-cleaving DNAzymes require only a single divalent metal ion for catalysis. We recently reported a general trivalent lanthanide-dependent DNAzyme named Ce13d. This work shows that Ce13d requires both Na⁺ and a trivalent lanthanide (e.g. Ce³⁺), simultaneously. This discovery is facilitated by the sequence similarity between Ce13d and a recently reported Na⁺-specific DNAzyme, NaA43. The Ce13d cleavage rate linearly depends on the concentration of both metal ions. Sensitized Tb³⁺ luminescence and DMS footprinting experiments indicate that the guanines in the enzyme loop are important for Na⁺-binding. The Na⁺ dissociation constants of Ce13d measured from the cleavage activity assay, Tb³⁺ luminescence and DMS footprinting are 24.6, 16.3 and 47 mM, respectively. Mutation studies indicate that the role of Ce³⁺ might be replaced by G₂₃ in NaA43. Ce³⁺ functions by stabilizing the transition state phosphorane, thus promoting cleavage. G₂₃ competes favorably with low concentration Ce³⁺ (below 1 μM). The G₂₃-to-hypoxanthine mutation suggests the N1 position of the guanine as a hydrogen bond donor. Together, Ce13d has two distinct metal binding sites, each fulfilling a different role. DNAzymes can be quite sophisticated in utilizing metal ions for catalysis and molecular recognition, similar to protein metalloenzymes.

DNA Catalysis: The Chemical Repertoire of DNAzymes

Deoxyribozymes or DNAzymes are single-stranded catalytic DNA molecules that are obtained by combinatorial in vitro selection methods. Initially conceived to function as gene silencing agents, the scope of DNAzymes has rapidly expanded into diverse fields, including biosensing, diagnostics, logic gate operations, and the development of novel synthetic and biological tools. In this review, an overview of all the different chemical reactions catalyzed by DNAzymes is given with an emphasis on RNA cleavage and the use of non-nucleosidic substrates. The use of modified nucleoside triphosphates (dN*TPs) to expand the chemical space to be explored in selection experiments and ultimately to generate DNAzymes with an expanded chemical repertoire is also highlighted.

Identification of the Same Na(+)-Specific DNAzyme Motif from Two In Vitro Selections Under Different Conditions

We report an investigation of the functional relationship between two independently selected RNA-cleaving DNAzymes, NaA43, and Ce13, through in vitro selection. The NaA43 DNAzyme was obtained through a combination of gel-based and column-based in vitro selection in the presence of Na(+) and reported to be highly selective for Na(+) over other metal ions. The Ce13 DNAzyme was isolated via a gel-based method in the presence of Ce(4+) and found to be active with trivalent lanthanides, Y(3+) and Pb(2+). Despite completely different activities reported for the two DNAzymes, they share a high level of sequence similarity (~60% sequence identity). In this work, we systematically analyzed the activity of both DNAzymes to elucidate their potential functional relationship. We found that Na(+) is an obligate cofactor of the Ce13 DNAzyme and lanthanides cannot initiate the cleavage reaction in the absence of Na(+). Hence, we conclude that the Ce13 DNAzyme is a variant of the NaA43 DNAzyme that catalyzes reaction in the presence Na(+) and also utilizes lanthanides in a potentially allosteric manner. These results have identified a new DNAzyme motif that is not only remarkably Na(+)-specific, but also allows for design of novel allosteric DNAzymes for different biotechnological applications.

Searching for a DNAzyme Version of the Leadzyme

The leadzyme refers to a small ribozyme that cleaves a RNA substrate in the presence of Pb(2+). In an optimized form, the enzyme strand contains only two unpaired nucleotides. Most RNA-cleaving DNAzymes are much longer. Two classical Pb(2+)-dependent DNAzymes, 8-17 and GR5, both contain around 15 nucleotides in the enzyme loop. This is also the size of most RNA-cleaving DNAzymes that use other metal ions for their activity. Such large enzyme loops make spectroscopic characterization difficult and so far no high-resolution structural information is available for active DNAzymes. The goal of this work is to search for DNAzymes with smaller enzyme loops. A simple replacement of the ribonucleotides in the leadzyme by deoxyribonucleotides failed to produce an active enzyme. A Pb(2+)-dependent in vitro selection combined with deep sequencing was then performed. After sequence alignment and DNA folding, a new DNAzyme named PbE22 was identified, which contains only 5 nucleotides in the enzyme catalytic loop. The biochemical characteristics of PbE22 were compared with those of the leadzyme and the two classical Pb(2+)-dependent DNAzymes. The rate of PbE22 rises with increase in Pb(2+) concentration, being 1.7 h(-1) in the presence of 100 μM Pb(2+) and reaching 3.5 h(-1) at 500 µM Pb(2+). The log of PbE22 rate rises linearly in a pH-dependent fashion (20 µM Pb(2+)) with a slope of 0.74. In addition, many other abundant sequences in the final library were studied. These sequences are quite varied in length and nucleotide composition, but some contain a few conserved nucleotides consistent with the GR5 structure. Interestingly, some sequences are active with Pb(2+) but none of them were active with even 50 mM Mg(2+), which is reminiscent of the difference between the GR5 and 8-17 DNAzymes.

Desulfurization Activated Phosphorothioate DNAzyme for the Detection of Thallium

Thallium (Tl) is a highly toxic heavy metal situated between mercury and lead in the periodic table. While its neighbors have been thoroughly studied for DNA-based sensing, little is known about thallium detection. In this work, in vitro selection of RNA-cleaving DNAzymes is carried out using Tl(3+) as the target metal cofactor. Both normal DNA and phosphorothioate (PS)-modified DNA are tested for this purpose. While no Tl(3+)-dependent DNAzymes are obtained, a DNA oligonucleotide containing a single PS-modified RNA nucleotide is found to cleave by ∼7% by Tl(3+) at the RNA position. The remaining 93% are desulfurized. By hybridization of this PS-modified oligonucleotide with the Tm7 DNAzyme, the cleavage yield increases to ∼40% in the presence of Tl(3+) and Er(3+). Tm7 is an Er(3+)-dependent RNA-cleaving DNAzyme. It cleaves only the normal substrate but is completely inactive using the PS-modified substrate. Tl(3+) desulfurizes the PS substrate to the normal substrate to be cleaved by Tm7 and Er(3+). This system is engineered into a catalytic beacon for Tl(3+) with a detection limit of 1.5 nM, which is below its maximal contamination limit defined by the U.S. Environmental Protection Agency (10 nM).

Functional nucleic acid-based sensors for heavy metal ion assays

Heavy metal contaminants such as lead ions (Pb(2+)), mercury ions (Hg(2+)) and silver ions (Ag(+)) can cause significant harm to humans and generate enduring bioaccumulation in ecological systems. Even though a variety of methods have been developed for Pb(2+), Hg(2+) and Ag(+) assays, most of them are usually laborious and time-consuming with poor sensitivity. Due to their unique advantages of excellent catalytic properties and high affinity for heavy metal ions, functional nucleic acids such as DNAzymes and aptamers show great promise in the development of novel sensors for heavy metal ion assays. In this review, we summarize the development of functional nucleic acid-based sensors for the detection of Pb(2+), Hg(2+) and Ag(+), and especially focus on two categories including the direct assay and the amplification-based assay. We highlight the emerging trends in the development of sensitive and selective sensors for heavy metal ion assays as well.

A general approach for rational design of fluorescent DNA aptazyme sensors based on target-induced unfolding of DNA hairpins

DNA aptazymes are allosteric DNAzymes activated by the targets of DNA aptamers. They take the advantages of both aptamers and DNAzymes, which can recognize specific targets with high selectivity and catalyze multiple-turnover reactions for signal amplification, respectively, and have shown their great promise in many analytical applications. So far, however, the available examples of DNA aptazyme sensors are still limited in utilizing only several DNAzymes and DNA aptamers, most likely due to the lack of a general and simple approach for rational design. Herein, we have developed such a general approach for designing fluorescent DNA aptazyme sensors. In this approach, aptamers and DNAzymes are connected at the ends to avoid any change in their original sequences, therefore enabling the general use of different aptamers and DNAzymes in the design. Upon activation of the aptazymes by the targets of interest, the rate of fluorescence enhancement via the cleavage of a dually labeled substrate by the active aptazymes is then monitored for target quantification. Two DNAzymes and two aptamers are used as examples for the design of three fluorescent aptazyme sensors, and they all show high selectivity and sensitivity for the detection of their targets. More DNA aptazyme sensors for a broader range of targets could be developed by this general approach as long as suitable DNAzymes and aptamers are used.

In vitro selection of a sodium-specific DNAzyme and its application in intracellular sensing

Over the past two decades, enormous progress has been made in designing fluorescent sensors or probes for divalent metal ions. In contrast, the development of fluorescent sensors for monovalent metal ions, such as sodium (Na(+)), has remained underdeveloped, even though Na(+) is one the most abundant metal ions in biological systems and plays a critical role in many biological processes. Here, we report the in vitro selection of the first (to our knowledge) Na(+)-specific, RNA-cleaving deoxyribozyme (DNAzyme) with a fast catalytic rate [observed rate constant (ko(bs)) ∼ 0.1 min(-1)], and the transformation of this DNAzyme into a fluorescent sensor for Na(+) by labeling the enzyme strand with a quencher at the 3' end, and the DNA substrate strand with a fluorophore and a quencher at the 5' and 3' ends, respectively. The presence of Na(+) catalyzed cleavage of the substrate strand at an internal ribonucleotide adenosine (rA) site, resulting in release of the fluorophore from its quenchers and thus a significant increase in fluorescence signal. The sensor displays a remarkable selectivity (>10,000-fold) for Na(+) over competing metal ions and has a detection limit of 135 µM (3.1 ppm). Furthermore, we demonstrate that this DNAzyme-based sensor can readily enter cells with the aid of α-helical cationic polypeptides. Finally, by protecting the cleavage site of the Na(+)-specific DNAzyme with a photolabile o-nitrobenzyl group, we achieved controlled activation of the sensor after DNAzyme delivery into cells. Together, these results demonstrate that such a DNAzyme-based sensor provides a promising platform for detection and quantification of Na(+) in living cells.

An Efficient Catalytic DNA that Cleaves L-RNA

Many DNAzymes have been isolated from synthetic DNA pools to cleave natural RNA (D-RNA) substrates and some have been utilized for the design of aptazyme biosensors for bioanalytical applications. Even though these biosensors perform well in simple sample matrices, they do not function effectively in complex biological samples due to ubiquitous RNases that can efficiently cleave D-RNA substrates. To overcome this issue, we set out to develop DNAzymes that cleave L-RNA, the enantiomer of D-RNA, which is known to be completely resistant to RNases. Through in vitro selection we isolated three L-RNA-cleaving DNAzymes from a random-sequence DNA pool. The most active DNAzyme exhibits a catalytic rate constant ~3 min^-1 and has a structure that contains a kissing loop, a structural motif that has never been observed with D-RNA-cleaving DNAzymes. Furthermore we have used this DNAzyme and a well-known ATP-binding DNA aptamer to construct an aptazyme sensor and demonstrated that this biosensor can achieve ATP detection in biological samples that contain RNases. The current work lays the foundation for exploring RNA-cleaving DNAzymes for engineering biosensors that are compatible with complex biological samples.

A unified sensor architecture for isothermal detection of double-stranded DNA, oligonucleotides, and small molecules

Pathogen detection is an important problem in many areas of medicine and agriculture, which can involve genomic or transcriptomic signatures or small-molecule metabolites. We report a unified, DNA-based sensor architecture capable of isothermal detection of double-stranded DNA targets, single-stranded oligonucleotides, and small molecules. Each sensor contains independent target detection and reporter modules, enabling rapid design. We detected gene variants on plasmids by using a straightforward isothermal denaturation protocol. The sensors were highly specific, even with a randomized DNA background. We achieved a limit of detection of ∼15 pM for single-stranded targets and ∼5 nM for targets on denatured plasmids. By incorporating a blocked aptamer sequence, we also detected small molecules using the same sensor architecture. This work provides a starting point for multiplexed detection of multi-strain pathogens, and disease states caused by genetic variants (e.g., sickle cell anemia).

Switchable catalytic DNA catenanes

Two-ring interlocked DNA catenanes are synthesized and characterized. The supramolecular catenanes show switchable cyclic catalytic properties. In one system, the catenane structure is switched between a hemin/G-quadruplex catalytic structure and a catalytically inactive state. In the second catenane structure the catenane is switched between a catalytically active Mg(2+)-dependent DNAzyme-containing catenane and an inactive catenane state. In the third system, the interlocked catenane structure is switched between two distinct catalytic structures that include the Mg(2+)- and the Zn(2+)-dependent DNAzymes.

Lanthanide-dependent RNA-cleaving DNAzymes as metal biosensors

Lanthanides represent a group of very important but challenging analytes for biosensor development. These 15 elements are very similar in their chemical properties. So far, limited success has been realized using the rational ligand design approach. My laboratory has successfully accomplished the task of carrying out combinatorial selection to isolate lanthanide-dependent RNA-cleaving DNAzymes. We report two new DNAzymes, each discovered in a different selection condition and both are highly specific to lanthanides. When both DNAzymes are used together, it is possible to identify the last few heavy lanthanides. Upon introducing a phosphorothioate modification, one of the abovementioned DNAzymes becomes highly active with many toxic heavy metals. With the selection of more DNAzymes with different activity patterns cross the lanthanide series, a sensor array might be produced for identifying each ion. This article is a minireview of the current developments on this topic and some of the historical aspects. It reflects the main content of the Fred Beamish Award presentation delivered at the 2014 Canadian Society for Chemistry Conference in Vancouver. Future directions in this area are also discussed.

Highly specific recognition of breast tumors by an RNA-cleaving fluorogenic DNAzyme probe

Breast cancer is one of the most commonly diagnosed cancers among females worldwide. Early detection of breast cancer is of vital importance to the reduction of the mortality rate. However, the lack of specific biomarkers that can effectively identify breast cancer cells limits the ability for early diagnosis of breast cancer. RNA-cleaving fluorogenic DNAzymes (RFDs), which can be produced through the systematic evolution of ligands by exponential enrichment (SELEX) process, are catalytic DNA molecules capable of generating a fluorescent signal when the appropriate target is bound. In this study, we carried out a SELEX experiment to select for RFDs that are active in the cell lysate of MDA-MB-231, a model breast cancer cell line. We obtained a RFD probe, named AAI2-5, that can detect MDA-MB-231 at a concentration of cell lysate proteins as low as 0.5 μg/mL (which is equivalent to ∼5000 cell/mL). AAI2-5 is capable of distinguishing MDA-MB-231 cells from normal cells as well as other types of tumor cells, including other subtypes of breast cancer cells. Moreover, AAI2-5 responded positively to more than 90% of malignant breast tumors. This report is the first study to explore the RFD system for the detection of cancer cells. The results suggest that RFD can be potentially applied for the diagnosis and treatment of breast cancer in the future.

Applications of synchrotron-based spectroscopic techniques in studying nucleic acids and nucleic acid-functionalized nanomaterials

In this review, we summarize recent progress in the application of synchrotron-based spectroscopic techniques for nucleic acid research that takes advantage of high-flux and high-brilliance electromagnetic radiation from synchrotron sources. The first section of the review focuses on the characterization of the structure and folding processes of nucleic acids using different types of synchrotron-based spectroscopies, such as X-ray absorption spectroscopy, X-ray emission spectroscopy, X-ray photoelectron spectroscopy, synchrotron radiation circular dichroism, X-ray footprinting and small-angle X-ray scattering. In the second section, the characterization of nucleic acid-based nanostructures, nucleic acid-functionalized nanomaterials and nucleic acid-lipid interactions using these spectroscopic techniques is summarized. Insights gained from these studies are described and future directions of this field are also discussed.

A new heavy lanthanide-dependent DNAzyme displaying strong metal cooperativity and unrescuable phosphorothioate effect

In vitro selection of RNA-cleaving DNAzymes was performed using three heavy lanthanide ions (Ln³⁺): Ho³⁺, Er³⁺ and Tm³⁺. The resulting sequences were aligned together and about half of the library contained a new family of DNAzyme. These DNAzymes have a simple loop structure, and they are active only with the seven heavy Ln³⁺. Among the tested non-lanthanide ions, only Y³⁺ induced cleavage and even Pb²⁺ failed to cleave, suggesting a very high specificity. A representative DNAzyme, Tm7, has a sigmoidal metal binding curve with a Hill coefficient of 3, indicating that three metal ions are involved in the catalytic step. Its pH-rate profile has a slope of 1, suggesting a single deprotonation step is involved in the rate-limiting step. Tm7 has a cleavage rate of 1.6 min⁻¹ at pH 7.8 with 10 μM Er³⁺. Phosphorothioate substitution at the cleavage junction completely inhibits the activity, which cannot be rescued by Cd²⁺ alone, or by a mixture of Er³⁺ and Cd²⁺, suggesting that two interacting metal ions are involved in direct bonding to both non-bridging oxygen atoms. A new model involving three lanthanide ions is proposed based on this study. A biosensor is engineered using Tm7 to detect Dy³⁺ down to 14 nM.

Photocaged DNAzymes as a general method for sensing metal ions in living cells

DNAzymes, which are sequences of DNA with catalytic activity, have been demonstrated as a potential platform for sensing a wide range of metal ions. Despite their significant promise, cellular sensing using DNAzymes has however been difficult, mainly because of the "always-on" mode of first-generation DNAzyme sensors. To overcome this limitation, a photoactivatable (or photocaged) DNAzyme was designed and synthesized, and its application in sensing Zn(II) in living cells was demonstrated. In this design, the adenosine ribonucleotide at the scissile position of the 8-17 DNAzyme was replaced by 2'-O-nitrobenzyl adenosine, rendering the DNAzyme inactive and thus allowing its delivery into cells intact, protected from nonspecific degradation within cells. Irradiation at 365 nm restored DNAzyme activity, thus allowing the temporal control over the sensing activity of the DNAzyme for metal ions. The same strategy was also applied to the GR-5 DNAzyme for the detection of Pb(II), thus demonstrating the possible scope of the method.

Hypoxic X-irradiation as an external stimulus for conformational change of oligodeoxynucleotides that possess disulfide bond and regulation of DNAzyme function

We achieved a conformational change of oligodeoxynucleotides and the regulation of DNAzyme function by means of a radiolytic strand exchange reaction of disulfide bond. We designed a system in which the DNAzyme function of RNA cleavage was suppressed by the hybridization of an inhibitor strand that possessed disulfide bond with an active DNAzyme. Hypoxic X-irradiation led to the recovery of RNA cleavage because the strand exchange reaction at the disulfide bond in inhibitor strand resulted in a release of inhibitor strand. This strategy may be applicable to gene regulation by hypoxic X-irradiation.

Biophysically inspired rational design of structured chimeric substrates for DNAzyme cascade engineering

The development of large-scale molecular computational networks is a promising approach to implementing logical decision making at the nanoscale, analogous to cellular signaling and regulatory cascades. DNA strands with catalytic activity (DNAzymes) are one means of systematically constructing molecular computation networks with inherent signal amplification. Linking multiple DNAzymes into a computational circuit requires the design of substrate molecules that allow a signal to be passed from one DNAzyme to another through programmed biochemical interactions. In this paper, we chronicle an iterative design process guided by biophysical and kinetic constraints on the desired reaction pathways and use the resulting substrate design to implement heterogeneous DNAzyme signaling cascades. A key aspect of our design process is the use of secondary structure in the substrate molecule to sequester a downstream effector sequence prior to cleavage by an upstream DNAzyme. Our goal was to develop a concrete substrate molecule design to achieve efficient signal propagation with maximal activation and minimal leakage. We have previously employed the resulting design to develop high-performance DNAzyme-based signaling systems with applications in pathogen detection and autonomous theranostics.

In vitro selection of a new lanthanide-dependent DNAzyme for ratiometric sensing lanthanides

Developing biosensors for lanthanides is an important but challenging analytical task. To address this problem, in vitro selection of RNA-cleaving DNAzymes was carried out using a library containing a region of 35 random nucleotides in the presence of Lu(3+), since Lu(3+) was reported to be the most efficient lanthanide for RNA cleavage. The resulting DNA sequences can be aligned to a single family with two conserved stretches of nucleotides. One of the representative DNAzymes (named Lu12) was further studied. Lu12 is more active with smaller lanthanides and has the lowest activity in the presence of the largest lanthanide (lutetium). Its cleavage rate is 0.12 min(-1) in the presence of 10 μM Nd(3+) at pH 6.0. This is a new DNAzyme, and a catalytic beacon sensor is designed by attaching a fluorophore/quencher pair, detecting Nd(3+) down to 0.4 nM (72 parts-per-trillion). This DNAzyme is highly selective for lanthanides as well, showing cleavage only with two nonlanthanide ions: Y(3+) and Pb(2+). We previously reported a DNAzyme named Ce13d, which has similar responses to all the trivalent lanthanides. Combining these two allows for a ratiometric assay that identifies a few large lanthanides.

Signal propagation in multi-layer DNAzyme cascades using structured chimeric substrates

Signal propagation through enzyme cascades is a critical component of information processing in cellular systems. Although such systems have potential as biomolecular computing tools, rational design of synthetic protein networks remains infeasible. DNA strands with catalytic activity (DNAzymes) are an attractive alternative, enabling rational cascade design through predictable base-pair hybridization principles. Multi-layered DNAzyme signaling and logic cascades are now reported. Signaling between DNAzymes was achieved using a structured chimeric substrate (SCS) that releases a downstream activator after cleavage by an upstream DNAzyme. The SCS can be activated by various upstream DNAzymes, can be coupled to DNA strand-displacement devices, and is highly resistant to interference from background DNA. This work enables the rational design of synthetic DNAzyme regulatory networks, with potential applications in biomolecular computing, biodetection, and autonomous theranostics.

Platinated DNA oligonucleotides: new probes forming ultrastable conjugates with graphene oxide

Metal containing polymers have expanded the property of polymers by involving covalently associated metal complexes. DNA is a special block copolymer. While metal ions are known to influence DNA, little is explored on its polymer property when strong metal complexes are associated. In this work, we study cisplatin modified DNA as a new polymer and probe. Out of the complexes formed between cisplatin-A15, HAuCl4-A15, Hg(2+)-T15 and Ag(+)-C15, only the cisplatin adduct is stable under the denaturing gel electrophoresis condition. Each Pt-nucleobase bond gives a positive charge and thus makes DNA a zwitterionic polymer. This allows ultrafast adsorption of DNA by graphene oxide (GO) and the adsorbed complex is highly stable. Non-specific DNA, protein, surfactants and thiolated compounds cannot displace platinated DNA from GO, while non-modified DNA is easily displaced in most cases. The stable GO/DNA conjugate is further tested for surface hybridization. This is the first demonstration of using metallated DNA as a polymeric material for interfacing with nanoscale materials.

Sensing parts-per-trillion Cd(2+), Hg(2+), and Pb(2+) collectively and individually using phosphorothioate DNAzymes

Cadmium, mercury, and lead are collectively banned by many countries and regions in electronic devices due to their extremely high toxicity. To date, no sensing method can detect them as a group and also individually with sufficient sensitivity and selectivity. An RNA-cleaving DNAzyme (Ce13d) was recently reported to be active with trivalent lanthanides, which are hard Lewis acids. In this work, phosphorothioate (PS) modifications were systematically made on Ce13d. A single PS modification at the substrate cleavage site shifts the activity from being dependent on lanthanides to soft thiophilic metals. By incorporating the PS modification to another DNAzyme, a sensor array was prepared to detect each metal. Individual sensors have excellent sensitivity (limit of detection = 4.8 nM Cd(2+), 2.0 nM Hg(2+), and 0.1 nM Pb(2+)). This study provides a new route to obtain metal-specific DNAzymes by atomic replacement and also offers important mechanistic insights into metal binding and DNAzyme catalysis.

Catalytic molecular logic devices by DNAzyme displacement

Chemical reactions catalyzed by DNAzymes offer a route to programmable modification of biomolecules for therapeutic purposes. To this end, we have developed a new type of catalytic DNA-based logic gates in which DNAzyme catalysis is controlled via toehold-mediated strand displacement reactions. We refer to these as DNAzyme displacement gates. The use of toeholds to guide input binding provides a favorable pathway for input recognition, and the innate catalytic activity of DNAzymes allows amplification of nanomolar input concentrations. We demonstrate detection of arbitrary input sequences by rational introduction of mismatched bases into inhibitor strands. Furthermore, we illustrate the applicability of DNAzyme displacement to compute logic functions involving multiple logic gates. This work will enable sophisticated logical control of a range of biochemical modifications, with applications in pathogen detection and autonomous theranostics.

Two Pb2+-specific DNAzymes with opposite trends in split-site-dependent activity

By splitting the catalytic core of DNAzymes into two halves, two Pb(2+)-specific DNAzymes retain partial activity, while they show opposite trends of activity as a function of the split site, revealing important nucleotides for catalysis and metal binding.