Chitosan: An Update on Potential Biomedical and Pharmaceutical Applications

Crosslinked Chitosan-Gelatin Biocompatible Nanocomposite as a Neuro Drug Carrier

The polymers, chitosan, a polysaccharide, and gelatin, a protein, are crosslinked in different ratios without the aid of a crosslinking agent. Facile chemical reactions were followed to synthesize a chitosan/gelatin nanocomposite in three different ratios (1:1, 1:3, and 3:1). The solubility of chitosan and the stability of gelatin were improved due to the crosslinking. Both the polymers have excellent biodegradability, biocompatibility, adhesion, and absorption properties in a biological environment. The properties of the composite were favorable to be used in drug delivery applications, and the drug dopamine was encapsulated in the composite for all three ratios. The properties of the chitosan/gelatin nanocomposite and dopamine-loaded chitosan/gelatin nanocomposite were examined using XRD, FTIR, SEM, UV, TGA, TEM, and DLS techniques, and the crosslinking was confirmed. Higuchi kinetic release was seen with a cumulative release of 93% within 24 h for the 1:3 nanocomposite in a neutral medium. The peaks at 9 and 20° in the XRD spectrum confirmed the encapsulation of dopamine with the increase in the crystallinity of chitosan, which is also evident from the SAED image. The dopamine functional groups were confirmed from the IR peaks between 500 and 1500 cm^-1 and the wide UV absorption maxima between 250 and 290 nm. The particle size of the drug-loaded composite in the ratios 1:1, 1:3, and 3:1 were calculated to be 275, 405, and 355 nm, respectively. The nanocomposite also showed favorable DPPH antioxidant and antibacterial activity againstStaphylococcus aureus. Sustained release of dopamine in a neutral medium using crosslinked chitosan and gelatin without the presence of a crosslinker is the highlight of the work.

Novel Ta/chitosan-doped CuO nanorods for catalytic purification of industrial wastewater and antimicrobial applications

Novel tantalum (Ta) and chitosan (CS)-doped CuO nanorods (NRs) were synthesized using a single step co-precipitation route. Different concentrations (2 and 4%) of Ta were used in fixed amounts of CS and CuO to examine their catalytic activity and antimicrobial potential. For critical analysis, synthesized NRs were systematically examined using XRD, FTIR HRTEM, EDS, UV-Vis and PL spectroscopy. The XRD technique revealed the monoclinic structure of CuO while an increase in its crystallite size (from 15.5 to 18.5 nm) was observed upon doping. FTIR spectra were examined to study the functional groups of CuO where peaks at 514 cm-1 and 603 cm-1 confirmed the formation of CuO NRs. PL spectra depicted the charge transfer efficiency of the synthesized samples. The presence of dopants (Ta and CS) and constituent elements (Cu, O) was detected using EDS spectra. Additionally, the pH based catalytic performance of fabricated NRs revealed 99.7% dye degradation of toxic methylene blue (MB) dye in neutral media, 99.4% in basic media and 99.5% in acidic media along with promising antibacterial activities for Gram negative/positive bacteria, respectively upon doping of Ta (4%) into CS/CuO. The adsorption energies of CuO co-doped with CS/Ta led to the creation of stable structures that were investigated theoretically using density functional theory.

Development of Biocompatible Polyhydroxyalkanoate/Chitosan-Tungsten Disulphide Nanocomposite for Antibacterial and Biological Applications

The unique structures and multifunctionalities of two-dimensional (2D) nanomaterials, such as graphene, have aroused increasing interest in the construction of novel scaffolds for biomedical applications due to their biocompatible and antimicrobial abilities. These two-dimensional materials possess certain common features, such as high surface areas, low cytotoxicities, and higher antimicrobial activities. Designing suitable nanocomposites could reasonably improve therapeutics and reduce their adverse effects, both medically and environmentally. In this study, we synthesized a biocompatible nanocomposite polyhydroxyalkanoate, chitosan, and tungsten disulfide (PHA/Ch-WS₂). The nanocomposite PHA/Ch-WS₂ was characterized by FESEM, elemental mapping, FTIR, and TGA. The objective of this work was to investigate the antimicrobial activity of PHA/Ch-WS₂ nanocomposites through the time–kill method against the multi-drug-resistant model organisms Escherichia coli (E. coli) K1 and methicillin-resistant Staphylococcus aureus (MRSA). Further, we aimed to evaluate the cytotoxicity of the PHA/Ch-WS₂ nanocomposite using HaCaT cell lines by using a lactate dehydrogenase (LDH) assay. The results demonstrated very significant bactericidal effects of the PHA/Ch-WS₂ nanocomposite, and thus, we hypothesize that the nanocomposite would feasibly suit biomedical and sanitizing applications without causing any adverse hazard to the environment.

Design of Bio-Graphene-Based Multifunctional Nanocomposites Exhibits Intracellular Drug Delivery in Cervical Cancer Treatment

The advent of bio-nanotechnology has revolutionized nanodrug delivery by improving drug efficacy and safety. Nevertheless, acceptable carriers for therapeutic molecules are one of the most difficult challenges in drug delivery. Graphene material-based (GMB) and polymer-based drug-loaded nanocarriers have both demonstrated clinical advantages in delivering drugs of interest in vitro/in vivo. Cisplatin (CDDP) is an inorganic chemotherapeutic drug that is commonly used to treat a variety of cancers. However, its clinical use is associated with drug resistance and few side effects, which reduces its antitumor effects. Therefore, we developed a CDDP-loaded chitosan-functionalized graphene oxide nanocomposite (CDDP@CS-GO NC)-based nanodrug delivery system (NDDS). Flow cytometry and confocal imaging show that the CDDP@CS-GO NCs lead to significantly increased intracellular drug accumulation in tumor cells. Cancer cells take up the nanocomposite via endocytosis and can generate intracellular reactive oxygen species (ROS) to increase mitochondrial membrane potential loss (Δψm) and enable cytochrome-c release, followed by the dysregulation of Bcl-2 into the cytosol and activation of caspase-3 to induce cancer cell apoptosis. In vitro experiments demonstrated the excellent cancer therapeutic effect with few side effects of the carriers. CDDP@CS-GO NCs are expected to play an important role in responsive NDDSs for cancer therapy.

Multiple Roles of Chitosan in Mucosal Drug Delivery: An Updated Review

Chitosan (CS) is a linear polysaccharide obtained by the deacetylation of chitin, which, after cellulose, is the second biopolymer most abundant in nature, being the primary component of the exoskeleton of crustaceans and insects. Since joining the pharmaceutical field, in the early 1990s, CS attracted great interest, which has constantly increased over the years, due to its several beneficial and favorable features, including large availability, biocompatibility, biodegradability, non-toxicity, simplicity of chemical modifications, mucoadhesion and permeation enhancer power, joined to its capability of forming films, hydrogels and micro- and nanoparticles. Moreover, its cationic character, which renders it unique among biodegradable polymers, is responsible for the ability of CS to strongly interact with different types of molecules and for its intrinsic antimicrobial, anti-inflammatory and hemostatic activities. However, its pH-dependent solubility and susceptibility to ions presence may represent serious drawbacks and require suitable strategies to be overcome. Presently, CS and its derivatives are widely investigated for a great variety of pharmaceutical applications, particularly in drug delivery. Among the alternative routes to overcome the problems related to the classic oral drug administration, the mucosal route is becoming the favorite non-invasive delivery pathway. This review aims to provide an updated overview of the applications of CS and its derivatives in novel formulations intended for different methods of mucosal drug delivery.

A Novel Method of Endotoxins Removal from Chitosan Hydrogel as a Potential Bioink Component Obtained by CO2 Saturation

The article presents a new approach in the purification of chitosan (CS) hydrogel in order to remove a significant amount of endotoxins without changing its molecular weight and viscosity. Two variants of the method used to purify CS hydrogels from endotoxins were investigated using the PyroGene rFC Enzymatic Cascade assay kit. The effect of the CS purification method was assessed in terms of changes in the dynamic viscosity of its hydrogels, the molecular weight of the polymer, microbiological purity after refrigerated storage and cytotoxicity against L929 cells based on the ISO 10993-5:2009(E) standard. The proposed purification method 1 (M1) allows for the removal of significant amounts of endotoxins: 87.9–97.6% in relation to their initial concentration in the CS hydrogel without affecting the solution viscosity. Moreover, the final solutions were sterile and microbiologically stable during storage. The M1 purification method did not change the morphology of the L929 cells.

Low molecular weight chitooligosaccharide inhibits infection of SARS-CoV-2 in vitro

AIMS

The discovery of antiviral substances to respond to COVID-19 is a global issue, including the field of drug development based on natural materials. Here, we showed that chitosan-based substances have natural antiviral properties against SARS-CoV-2 in vitro.

METHODS AND RESULTS

The molecular weight of chitosan-based substances was measured by the gel permeation chromatography analysis. In MTT assay, the chitosan-based substances have low cytotoxicity to Vero cells. The antiviral effect of these substances was confirmed by quantitative viral RNA targeting the RdRp and E genes and plaque assay. Among the substances tested, low molecular weight chitooligosaccharide decreased the fluorescence intensity of SARS-CoV-2 nucleocapsid protein of the virus-infected cells in a dose-dependent manner.

CONCLUSIONS

In conclusion, the chitooligosaccharide, a candidate for natural treatment, has antiviral effects against the SARS-CoV-2 virus in vitro.

SIGNIFICANCE AND IMPACT OF STUDY

In this study, it was suggested for the first time that chitosan-based substances such as chitooligosaccharide can have an antiviral effect on SARS-CoV-2 in vitro.

Dual Coating of Chitosan and Albumin Negates the Protein Corona-Induced Reduced Vascular Adhesion of Targeted PLGA Microparticles in Human Blood

Vascular-targeted carriers (VTCs) have the potential to localize therapeutics and imaging agents to inflamed, diseased sites. Poly (lactic-co-glycolic acid) (PLGA) is a negatively charged copolymer commonly used to construct VTCs due to its biodegradability and FDA approval. Unfortunately, PLGA VTCs experienced reduced adhesion to inflamed endothelium in the presence of human plasma proteins. In this study, PLGA microparticles were coated with chitosan (CS), human serum albumin (HSA), or both (HSA-CS) to improve adhesion. The binding of sialyl Lewis A (a ligand for E-selectin)-targeted PLGA, HSA-PLGA, CSPLGA, and HSA-CSPLGA to activated endothelial cells was evaluated in red blood cells in buffer or plasma flow conditions. PLGA VTCs with HSA-only coating showed improvement and experienced 35–52% adhesion in plasma compared to plasma-free buffer conditions across all shear rates. PLGA VTCs with dual coating—CS and HSA—maintained 80% of their adhesion after exposure to plasma at low and intermediate shears and ≈50% at high shear. Notably, the protein corona characterization showed increases at the 75 and 150 kDa band intensities for HSA-PLGA and HSA-CSPLGA, which could correlate to histidine-rich glycoprotein and immunoglobulin G. The changes in protein corona on HSA-coated particles seem to positively influence particle binding, emphasizing the importance of understanding plasma protein–particle interactions.

Adhesive and biodegradable membranes made of sustainable catechol-functionalized marine collagen and chitosan

We describe bioadhesive membranes developed from marine renewable biomaterials, namely chitosan and collagen extracted from fish skins. Collagen was functionalized with catechol groups (Coll-Cat) to provide the membranes with superior adhesive properties in a wet environment and blended with chitosan to improve the mechanical properties. The blended membranes were compared to chitosan and chitosan blended with unmodified collagen in terms of surface morphology, wettability, weight loss, water uptake, mechanical and adhesive properties. The metabolic activity, the viability and the morphology of L929 fibroblastic cells seeded on these membranes were also assessed. Our results show that the functionalization with catechol groups improves the adhesive and mechanical properties of the membranes and enhances cell attachment and proliferation. These data suggest that the developed marine origin-raw membranes present a potential towards the restoration of the structural and functional properties of damaged soft tissues.

Injectable thermo-sensitive and wide-crack self-healing hydrogel loaded with antibacterial anti-inflammatory dipotassium glycyrrhizate for full-thickness skin wound repair

Severe skin injuries are hard to repair and susceptible to bacterial infection. Development of a versatile antimicrobial anti-inflammatory hydrogel dressing that eliminates concern over antibiotic resistance is urgently needed but remains an elusive goal. Our research, described herein, the design and fabrication of a new family of supramolecular hydrogels based on hydroxypropyl chitosan (HPCS) and poly(N-isopropylacrylamide) (PNIPAM) may prove to be that goal. Employing the reversible cross-linking by β-cyclodextrin (β-CD) and adamantyl (AD) pre-assembly, the hydrogels can be formed in a facile one-pot method. Additionally, the structure and performance of the hydrogels can be controlled by a simple adjustment of the AD content. The obtained hydrogels exhibit an abundance of desired properties; they are injectable, thermosensitive, highly ductile, self-healable (will self-heal recurring damage to the hydrogel bandage of up to several millimeters wide), biocompatible, and have antimicrobial activity against Staphylococcus aureus when infused with dipotassium glycyrrhizinate (DG). Using a mouse full-thickness skin defect model, in vivo wound healing evaluations revealed that the DG-loaded hydrogels (HP-3/DG10) applied to the wound resulted in rapid wound closure. The hydrogels promoted efficient tissue remolding, collagen deposition, decreased inflammation and performed better than the control groups of commercial Tegaderm^TM film and 3M dressing. Given their multifunctionality and in vivo efficacy, the DG-loaded HP hydrogels hold great potential as a wound dressing for full-thickness skin repair. STATEMENT OF SIGNIFICANCE: Injectable hydrogels are receiving increasing attention as an ideal wound dressing. To the best of our knowledge, however, injectable and wide-crack self-healing hydrogel dressings have been hardly studied. A versatile antimicrobial hydrogel without drug resistance or cytotoxicity is also highly required. Therefore, in the present study, we constructed injectable thermosensitive and wide-crack self-healing hydrogels with antibacterial and anti-inflammatory properties. These hydrogels were developed through novel strategies of the wide-crack self-healing design and the loading of the bioactive antibacterial and anti-inflammatory agent dipotassium glycyrrhizinate. The simple preparation method and multifunctionality of the studied hydrogel composites may provide important insights for the development of future biomaterials for wound dressings and other biomedical applications.

Bioinspired Polysaccharide-Derived Zwitterionic Brush-like Copolymer as an Injectable Biolubricant for Arthritis Treatment

Developing highly efficient and biocompatible biolubricants for arthritis treatment is extraordinarily demanded. Herein, inspired by the efficient lubrication of synovial joints, a paradigm that combines natural polysaccharide (chitosan) with zwitterionic poly[2-(methacryloyloxy) ethyl phosphorylcholine] (PMPC), to design a series of brush-like Chitosan-g-PMPC copolymers with highly efficient biological lubrication and good biocompatibility is presented. The Chitosan-g-PMPC copolymers are prepared via facile one-step graft polymerization in aqueous medium without using any toxic catalysts and organic solvents. The as-prepared Chitosan-g-PMPC copolymers exhibit very low coefficient of friction (μ < 0.01) on Ti₆ Al₄ V alloy substrate in both pure water and biological fluids. The superior lubrication is attributed primarily to the hydrated feature of PMPC side chains, interface adsorption of copolymer as well as to the hydrodynamic effect. In vivo experiments confirm that Chitosan-g-PMPC can alleviate the swelling symptom of arthritis and protect the bone and cartilage from destruction. Due to their facile preparation, distinctive lubrication properties, and good biocompatibility, Chitosan-g-PMPC copolymers represent a new type of biomimetic lubricants derived from natural biopolymer for promising arthritis treatment and artificial joint lubrication.

Marine Polysaccharides in Tailor- Made Drug Delivery

Abstract:

Marine sources have attracted much interest as an emerging source of biomaterials in drug delivery applications. Amongst all other marine biopolymers, polysaccharides have been the mostly investigated class of biomaterials. The low cytotoxic behavior, in combination with the newly explored health benefits of marine polysaccharides has made it one of the prime research areas in the pharmaceutical and biomedical fields. In this review, we focused on all available marine polysaccharides, including their classification based on biological sources. The applications of several marine polysaccharides in recent years for tissue-specific novel drug delivery including gastrointestinal, brain tissue, transdermal, ocular, liver, and lung have also been discussed here. The abundant availability in nature, cost-effective extraction, and purification process along with a favorable biodegradable profile will encourage researchers to continue investigating marine polysaccharides for exploring newer applications in targeting specific delivery of therapeutics.

Physico-Mechanical Properties of Commercially Available Tissue Conditioner Modified with Synthesized Chitosan Oligosaccharide

This study aims to compare the hardness, sorption and solubility of commercially available tissue conditioner [TC] modified with chitosan [CS] and synthesized chitosan oligosaccharide [COS] in antifungal concentration. COS was synthesized by acid hydrolysis and characterized by FTIR and XRD. Experimental materials were formulated by incorporating each per gram of TC powder with effective antifungal concentration of chitosan 1.02 mg (Group 1: TC-CS) and 0.51 mg COS (Group 2: TC-COS). A commercially available TC was used as control (Group 0: CTC). Shore A hardness test was performed according to ASTM D 2240-05 (2010) standards on samples stored in dry environment, distilled water (DW) and artificial saliva (AS) at 37 °C (n = 5 per group). Percent weight changes (n = 5 per group) after storage in DW and AS was used to record sorption and solubility. One-way Anova with post hoc Tukey’s test was applied. FTIR and XRD confirmed low molecular weight and amorphous nature of COS. Experimental groups had higher Shore A hardness values; however, these changes were not significant. Greatest variations in durometer values (p ≤ 0.05) were observed during the first 24 h. Experimental groups had higher (p ≤ 0.05) percentage sorption and solubility. Samples stored in DW had significantly higher (p = 0.019) sorption, whereas material had higher (p = 0.005) solubility in AS. Mean solubility values in both immersion mediums was highest for Group 2, followed by group 1 and group 0. In addition, significant (p ≤ 0.05) increase in solubility upon aging was noted for each material. Experimental tissue conditioner had higher hardness, sorption and solubility. However, these changes are not substantial to interfere with their tissue healing property. Therefore, these materials may be considered and explored further as potential antimicrobial drug delivery agent for denture stomatitis patients.

Chitosan biological molecule improves bactericidal competence of ceftazidime against Burkholderia pseudomallei biofilms

Biofilm-associated Burkholderia pseudomallei infections (melioidosis) are problematic because of reduced sensitivity to antibiotics and high frequency of relapse. Biofilm dispersal agents are essential to liberate the biofilm-encased cells, which then become planktonic and are more susceptible to antibiotics. This study aimed to evaluate the ability of deacetylated chitosan (dCS), an antimicrobial and antibiofilm biological macromolecule, to disrupt established biofilms, thus enabling ceftazidime (CAZ) to kill biofilm-embedded B. pseudomallei. We combined dCS with CAZ using a mechanical stirring method to generate dCS/CAZ. In combination, 1.25-2.5 mg ml^-1 dCS/1-2 μg ml^-1 CAZ acted synergistically to kill cells more effectively than did either dCS or CAZ alone. Notably, a combination of 5-10 mg ml^-1 dCS with 256-512 μg ml^-1 CAZ, prepared either by mechanical stirring (dCS/CAZ) or mixing (dCS + CAZ), drastically improved bactericidal activities against biofilm cells leading to a 3-6 log CFU reduction. Confocal laser-scanning microscope (CLSM) images revealed that 10 mg ml^-1 dCS/512 μg ml^-1 CAZ is by far the best formulation to diminish B. pseudomallei biofilm biomass and produces the lowest live/dead cell ratios of B. pseudomallei in biofilm matrix. Collectively, these findings emphasize the potential of novel therapeutic antibacterial and antibiofilm agents to fight against antibiotic-tolerant B. pseudomallei biofilm-associated infections.

Plausible Mechanistic Insights in Biofilm Eradication Potential against Candida spp. Using In Situ-Synthesized Tyrosol-Functionalized Chitosan Gold Nanoparticles as a Versatile Antifouling Coating on Implant Surfaces

In the present study, tyrosol-functionalized chitosan gold nanoparticles (Chi-TY-AuNPs) were prepared as an alternative treatment strategy to combat fungal infections. Various biophysical techniques were used to characterize the synthesized Chi-TY-AuNPs. The antifungal and antibiofilm activities of Chi-TY-AuNPs were evaluated against Candida albicans and C. glabrata, and efforts have been made to elucidate the possible mechanism of action. Chi-TY-AuNPs showed a high fungicidal effect against both sessile and planktonic cells of Candida spp. Additionally, Chi-TY-AuNPs completely eradicated (100%) the mature biofilms of both the Candida spp. FESEM analysis highlighted the morphological alterations in Chi-TY-AuNP-treated Candida biofilm cells. The effect of Chi-TY-AuNPs on the ECM components showed significant reduction in protein content in the C. glabrata biofilm and substantial decrease in extracellular DNA content of both the Candida spp. ROS generation analysis using DCFDA-PI staining showed high ROS levels in both the Candida spp., whereas pronounced ROS production was observed in the Chi-TY-AuNP-treated C. glabrata biofilm. Biochemical analysis revealed decreased ergosterol content in Chi-TY-AuNP-treated C. glabrata cells, while inconsequential changes were observed in C. albican s. Furthermore, the transcriptional expression of selected genes (ergosterol biosynthesis, efflux, sterol importer, and glucan biogenesis) was reduced in C. glabrata in response to Chi-TY-AuNPs except ERG11 and CDR1. Conclusively, the result showed the biofilm inhibition and biofilm eradication efficacy of Chi-TY-AuNPs in both the Candida spp. Findings of the present study manifest Chi-TY-AuNPs as a potential therapeutic solution to Candida biofilm-related chronic infections and overcome biofilm antifungal resistance.

The Contribution of Silk Fibroin in Biomedical Engineering

Silk fibroin (SF) is a natural protein (biopolymer) extracted from the cocoons of Bombyx mori L. (silkworm). It has many properties of interest in the field of biotechnology, the most important being biodegradability, biocompatibility and robust mechanical strength with high tensile strength. SF is usually dissolved in water-based solvents and can be easily reconstructed into a variety of material formats, including films, mats, hydrogels, and sponges, by various fabrication techniques (spin coating, electrospinning, freeze-drying, and physical or chemical crosslinking). Furthermore, SF is a feasible material used in many biomedical applications, including tissue engineering (3D scaffolds, wounds dressing), cancer therapy (mimicking the tumor microenvironment), controlled drug delivery (SF-based complexes), and bone, eye and skin regeneration. In this review, we describe the structure, composition, general properties, and structure-properties relationship of SF. In addition, the main methods used for ecological extraction and processing of SF that make it a green material are discussed. Lastly, technological advances in the use of SF-based materials are addressed, especially in healthcare applications such as tissue engineering and cancer therapeutics.

Symmetry between Structure–Antibacterial Effect of Polymers Functionalized with Phosphonium Salts

In actual context, when the terms of biomass and bioenergy are extensively used, it becomes clear that the comparative study of some biopolymers, such as cellulose and chitosan, can offer a large usage range, based on the scientific progress obtained in the biomaterials field. Starting from the structural similarity of these two polymers, we synthesized composite materials by grafting on their surface biocide substances (phosphonium salts). After testing the biocidal effect, we can conclude that the antibacterial effect depends on the ratio of support to phosphonium salt, influenced by the interaction between the cationic component of the biocides and by the anionic component of the bacterial cellular membrane. It was also observed that for the materials obtained by cellulose functionalization with tri-n-butyl-hexadecyl phosphonium bromide, the bacterial effect on E. coli strain was much better when chitosan was used as the support material.

Synthesis and characterization of berberine-loaded chitosan nanoparticles for the protection of urethane-induced lung cancer

Lung cancer is one of the most common types of malignant tumors of the respiratory system and has the highest rates of incidence and mortality of malignant tumors. This study aimed to synthesize and characterize berberine-loaded chitosan nanoparticles (BBR-COSNPs) and to evaluate their protective effects against urethane-induced lung cancer. Forty male albino mice were divided into four groups, with the first serving as a negative control and the other three groups were injected intraperitoneally with urethane (1 mg/kg b.w) each other day for 1 week then group 2 was served as a positive control, however, groups 3 and 4 were treated orally with a daily dose of BBR or BBR-COSNPs (75 mg/kg b.w) for 10 consecutive weeks. Blood and lung tissue samples are collected for laboratory assay. The BBR-COSNPs were spherical, with an average particle size of 45.56 nm and zeta potential of 39.82 1.82 mV. The in vivo data demonstrated that mice given urethane alone had a significant increase in MDA, NO, NF-κB level, HIF1-α, and COX-2-positive expression in the lung tissue and serum VEGFR2, ALT, AST, urea, and creatinine accompanied with a significant decrease in GSH, SOD, caspase 9 in the lung tissue and serum BAX. Co-treatment with BBR-COSNPs suppressed lung cancer growth and promoted apoptosis by modulating serum BAX and lung caspase 9 gene expressions. In addition, BBR-COSNPs inhibited tumor angiogenesis by reduction in levels of serum VEGFR2 and lung HIF 1 gene expression. It is possible to conclude that BBR-COSNPs can be used in oral administration formulations for lunganticancer therapy.

Theranostic nanoplatforms of emodin-chitosan with blue laser light on enhancing the anti-biofilm activity of photodynamic therapy against Streptococcus mutans biofilms on the enamel surface

Background

Combining photosensitizer and light irradiation, named antimicrobial photodynamic therapy (aPDT) is an adjuvant therapy for eliminating microbial biofilms. This ex vivo study evaluates the effect of anti-biofilm activity of aPDT based on emodin-chitosan nanoparticles (Emo-CS-NPs) plus blue laser light against Streptococcus mutans biofilm on the enamel surface.

Materials

After determination of the fractional inhibitory concentration index of Emo and CS by checkerboard array assay, Emo-CS-NPs were synthesized and characterized. Following treatment of pre-formed S. mutans biofilms on the enamel slabs, cellular uptake of Emo-CS-NPs and intracellular reactive oxygen species (ROS) production were determined. The anti-biofilm and anti-metabolic activities of aPDT were investigated. Eventually, lactic acid production capacity, concentrations of S. mutans extracellular DNA (eDNA) levels, and expression of the gene involved in the biofilm formation (gtfB) were evaluated.

Results

The maximum uptake of Emo-CS-NPs occurs in an incubation time of 5 min. When irradiated, Emo-CS-NPs were photoactivated, generating ROS, and led to a decrease in the cell viability and metabolic activity of S. mutans significantly (P < 0.05). S. mutans eDNA and lactic acid production outcomes indicated that Emo-CS-NPs-mediated aPDT led to a significant reduction of eDNA levels (48%) and lactic acid production (72.4%) compared to the control group (P < 0.05). In addition, gtfB mRNA expression in S. mutans was downregulated (7.8-fold) after aPDT in comparison with the control group (P < 0.05).

Conclusions

Our data support that, aPDT using Emo-CS-NPs revealed the highest cellular uptake and ROS generation. Emo-CS-NPs based aPDT could inhibit significantly biofilm formation and reduce effectively virulence potency of S. mutans; thus, it could be an adjuvant therapy against dental caries.

Enhancement of photocatalytic and biological activities of chitosan/activated carbon incorporated with TiO2 nanoparticles

Novel and sustainable chitosan (CS)/activated charcoal (AC) composites were prepared by cross-linking with epichlorohydrin (ECH) to form a porous structure. Different titanium dioxide nanoparticle (TiO₂ NPs) concentrations (0, 0.2, 0.4, and 0.8% w/w) were added to enhance the photocatalytic, antibacterial, larvicidal, and pupicidal activities' efficiency toward Rose Bengal (RB) dye and the Culex pipiens. The composites were characterized by FT-IR, XRD, XPS, BET and SEM. The SEM images revealed the porous structure of CS/AC and TiO₂ nanoparticles were uniformly distributed in the CS/AC matrix. The degradation of RB dye was used to test the photocatalytic behavior of the composites. Supporting TiO₂ on a CS/AC matrix resulted in a significant increase in photocatalytic performance. The antibacterial activities supported by CS/AC/TiO₂ NPs were evaluated by bacterial growth inhibition against B. subtilis, S. aureus, E. coli, and P. aeruginosa. The results showed that CS/AC/TiO₂ NPs composite has an inhibitory effect and therefore considered antibacterial agents. CS/AC/0.4%TiO₂ NPs showed maximum efficacy against larvicidal activity and pupicidal of mosquito vector which recorded 99.00 ± 1.14, 95.00 ± 1.43, and 92.20 ± 2.64 for the first, second, and third larval instars and 66.00 ± 2.39 for pupal mortality, while the repellent activity reported high protection at 82.95 ± 2.99 with 3.24 mg/cm² dose compared to control DEET.

Development and Characterization of Acrylic Based Bone Cements

Bone tissue engineering has emerged as a multidisciplinary field in recent times with an aim to expedite the process of regeneration of damaged or diseased tissues. This study is an attempt to fabricate and characterize Tricalcium Phosphate (TCP) and Chitosan incorporated Polymethylmethacrylate (PMMA) based bone cement. In total two experimental PMMA based bone cements were fabricated that were differentiated by presence and absence of Chitosan. In both groups (10 and 30 wt.%) TCP were incorporated into Methyl methacrylate (MMA) monomer. PMMA was used as a control. The physical, mechanical and thermal properties of the composites were assessed. Morphological changes of PMMA after the introduction of TCP and Chitosan were observed by means of X-ray diffraction (XRD). Major peak shifts in Fourier transform Infrared spectroscopy (FTIR) spectra demonstrated the strong bonding of PMMA with incorporated materials. PMMA incorporated with 10% TCP showed the maximum wettability in absence of Chitosan. Hardness of the tested specimens decreased with increasing content of TCP which in turns enhanced ductility. It was also observed that neither of the samples showed significant degradation. The incorporation of additives enhance the physical and chemical properties of PMMA as bone cement.

Recent development of magnetic biochar crosslinked chitosan on heavy metal removal from wastewater - Modification, application and mechanism

Heavy metal contamination in water bodies is currently in an area of greater concern due to the adverse effects on human health. Despite the good adsorption performance of biochar, various modifications have been performed on the pristine biochar to further enhance its adsorption capability, at the same time overcome the difficulty of particles separation and mitigate the secondary pollution issues. In this review, the feasibility of chitosan-modified magnetic biochar for heavy metal removal from aqueous solution is evaluated by critically analysing existing research. The effective strategies that applied to introduce chitosan and magnetic substances into the biochar matrix are systematically reviewed. The physicochemical changes of the modified-biochar composite are expounded in terms of surface morphology, pore properties, specific surface area, surface functional groups and electromagnetism. The detailed information regarding the adsorption performances of various modified biochar towards different heavy metals and their respective underlying mechanisms are studied in-depth. The current review also analyses the kinetic and isotherm models that dominated the adsorption process and summarizes the common models that fitted well to most of the experimental adsorption data. Moreover, the operating parameters that affect the adsorption process which include solution pH, temperature, initial metal concentration, adsorbent dosage, contact time and the effect of interfering ions are explored. This review also outlines the stability of modified biochar and their regeneration rate after cycles of heavy metal removal process. Lastly, constructive suggestions on the future trends and directions are provided for better research and development of chitosan-modified magnetic biochar.

Chitosan Protects Immunosuppressed Mice Against Cryptosporidium parvum Infection Through TLR4/STAT1 Signaling Pathways and Gut Microbiota Modulation

Cryptosporidium parvum infection is very common in infants, immunocompromised patients, or in young ruminants, and chitosan supplementation exhibits beneficial effects against the infection caused by C. parvum. This study investigated whether chitosan supplementation modulates the gut microbiota and mediates the TLR4/STAT1 signaling pathways and related cytokines to attenuate C. parvum infection in immunosuppressed mice. Immunosuppressed C57BL/6 mice were divided into five treatment groups. The unchallenged mice received a basal diet (control), and three groups of mice challenged with 1 × 10⁶ C. parvum received a basal diet, a diet supplemented with 50 mg/kg/day paromomycin, and 1 mg/kg/day chitosan, and unchallenged mice treated with 1 mg/kg/day chitosan. Chitosan supplementation regulated serum biochemical indices and significantly (p < 0.01) reduced C. parvum oocyst excretion in infected mice treated with chitosan compared with the infected mice that received no treatment. Chitosan-fed infected mice showed significantly (p < 0.01) decreased mRNA expression levels of interferon-gamma (IFN-γ) and tumor necrosis factor-α (TNF-α) compared to infected mice that received no treatment. Chitosan significantly inhibited TLR4 and upregulated STAT1 protein expression (p < 0.01) in C. parvum-infected mice. 16S rRNA sequencing analysis revealed that chitosan supplementation increased the relative abundance of Bacteroidetes/Bacteroides, while that of Proteobacteria, Tenericutes, Defferribacteres, and Firmicutes decreased (p < 0.05). Overall, the findings revealed that chitosan supplementation can ameliorate C. parvum infection by remodeling the composition of the gut microbiota of mice, leading to mediated STAT1/TLR4 up- and downregulation and decreased production of IFN-γ and TNF-α, and these changes resulted in better resolution and control of C. parvum infection.

Nanocarriers Based on Gold Nanoparticles for Epigallocatechin Gallate Delivery in Cancer Cells

Gold nanoparticles (AuNPs) are inorganic and biocompatible nanovehicles capable of conjugating biomolecules to enhance their efficacy in cancer treatment. The high and reactive surface area provides good advantages for conjugating active compounds. Two approaches were developed in this work to improve the Epigallocatechin-3-gallate (EGCG) antioxidant efficacy. AuNPs were synthesized by reducing gold salt with chitosan. One other nanosystem was developed by functionalizing AuNPs with cysteamine using the Turkevitch method. The physico-chemical characterization of EGCG conjugated in the two nanosystems-based gold nanoparticles was achieved. The in vitro toxic effect induced by the nanoconjugates was evaluated in pancreatic cancer cells, showing that encapsulated EGCG keeps its antioxidant activity and decreasing the BxPC3 cell growth. A significant cell growth inhibition was observed in 50% with EGCG concentrations in the range of 2.2 and 3.7 μM in EGCG-ChAuNPs and EGCG-Cyst-AuNPs nanoconjugates, respectively. The EGCG alone had to be present at 23 μM to induce the same cytotoxicity response. Caspase-3 activity assay demonstrated that the conjugation of EGCG induces an enhancement of BxPC3 apoptosis compared with EGCG alone. In conclusion, AuNPs complexes can be used as delivery carriers to increase EGCG antioxidant activity in cancer tissues.

Electrosprayed cefazolin-loaded niosomes onto electrospun chitosan nanofibrous membrane for wound healing applications

Chronic wounds are among the most therapeutically challenging conditions, which are commonly followed by bacterial infection. The ideal approach to treat such injuries are synergistic infection therapy and skin tissue regeneration. In the recent decades, nanotechnology has played a critical role in eradicating bacterial infections by introducing several carriers developed for drug delivery. Moreover, advances in tissue engineering have resulted in new drug delivery systems that can improve the skin regeneration rate and quality. In this study, cefazolin-loaded niosomes were electrosprayed onto chitosan membrane for wound healing applications. For this purpose, niosomes were obtained by the thin-film hydration method; electrospinning was then conducted to fabricate nanofibrous mats. In vitro characterization of the scaffold was performed to evaluate the physicochemical and biological properties. Finally, in vivo studies were carried out to evaluate the potential use of the membrane for skin regeneration. In vitro results indicated the antibacterial properties of the membrane against Staphylococcus aureus (S. aureus) and Pseudomonas aeruginosa (P. aeruginosa) due to the gradual release of cefazolin from niosomes. The scaffolds also showed no cell toxicity. In vivo studies also confirmed the ability of the membrane to enhance skin regeneration by improving re-epithelialization, tissue remodeling, and angiogenesis. The current study could well show the promising role of the prepared scaffold for skin regeneration and bacterial infection elimination.

Wound Healing Effects of Chitosan Nanosheets/Honey Compounds in Male BALB/c Mice

Background and aim: Up to now, proper wound care management has remained as an important clinical challenge. Chitosan nanosheets (CNSs) showed a great potential in tissue engineering, but our knowledge about their wound healing effectiveness is based on very limited data. Thus, the aim of this research was to evaluate the wound healing potential of CNSs and honey as a vehicle for these nanoparticles. Methods: The skin excisional wound injury model was made in adult male BALB/c mice (n = 60) by creating two identical sized wounds (5mm) on either side of their dorsal midline. The animals were divided into five groups (n = 12 each) as untreated control, honey, polyethylene glycol, and CNSs dissolved either in honey or polyethylene glycol. Animals were received their relative topical treatments twice per day for 14 consecutive days. Tissue sampling was carried out on days 4, 7, 10, and 14 post wounding. The histological parameters including inflammatory cells infiltration, fibroblast proliferation, re-epithelialization, granulation formation, and collagen formation were evaluated in all studied time points. Results: Compared to the control group, CNSs showed significant wound healing activities with lower inflammatory cells infiltration, higher fibroblastosis and new epithelium thickness, and greater granulation area and collagen fibers density in the ulcer bed. In addition, honey synergistically increased the wound healing activity of the studied nanoparticles. Conclusion: These results showed that CNSs have promising wound healing activity specially when dissolved with honey concurrently.

Latest Trends in Surface Modification for Dental Implantology: Innovative Developments and Analytical Applications

An increase in the world population and its life expectancy, as well as the ongoing concern about our physical appearance, have elevated the relevance of dental implantology in recent decades. Engineering strategies to improve the survival rate of dental implants have been widely investigated, focusing on implant material composition, geometry (usually guided to reduce stiffness), and interface surrounding tissues. Although efforts to develop different implant surface modifications are being applied in commercial dental prostheses today, the inclusion of surface coatings has gained special interest, as they can be tailored to efficiently enhance osseointegration, as well as to reduce bacterial-related infection, minimizing peri-implantitis appearance and its associated risks. The use of biomaterials to replace teeth has highlighted the need for the development of reliable analytical methods to assess the therapeutic benefits of implants. This literature review considers the state-of-the-art strategies for surface modification or coating and analytical methodologies for increasing the survival rate for teeth restoration.

Analysis of clinical trials on biomaterial and therapeutic applications of chitosan: A review

Chitosan is a modified natural carbohydrate polymer derived from chitin that occurs in many natural sources. It has a diverse range of applications in medical and pharmaceutical sciences. Its primary and permitted use is biomaterial in medical devices. Chitosan and its derivatives also find utility in pharmaceuticals as an excipient, drug carrier, or therapeutic agent. The USFDA has approved chitosan usage as a biomaterial but not for pharmaceutical use, primarily because of the concerns over its source, purity, and immunogenicity. A large number of clinical studies are underway on chitosan-based materials/ products because of their diverse applications. Herein, we analyze clinical studies to understand their clinical usage portfolio. Our analysis shows that >100 clinical studies are underway to investigate the safety/efficacy of chitosan or its biomaterials/ nanoparticles, comprising ~95% interventional and ~ 5% observational studies. The regulatory considerations that limit the use of chitosan in pharmaceuticals are also deliberated. TEASER: Clinical Trials of Chitosan.

Production of Fungal Nanochitosan Using High-Pressure Water Jet System for Biomedical Applications

In this present work, fungal nanochitosans, with very interesting particle size distribution of 22 µm, were efficiently generated in high-yield production using a high-pressure water jet system (Star Burst System, Sugino, Japan) after 10 passes of mechanical treatment under high pressure. The specific characterization of fungal chitosan nanofibers suspensions in water revealed a high viscosity of 1450 mPa.s and an estimated transparency of 43.5% after 10 passes of fibrillation mechanical treatment. The mechanical characterization of fungal nanochitosan (NC) film are very interesting for medical applications with a Young’s modulus (E), a tensile strength (TS), and elongation at break (e%) estimated at 2950 MPa, 50.5 MPa, and 5.5%, respectively. Furthermore, we exhibited that the fungal nanochitosan (NC) film presented very good long-term antioxidant effect (reached 82.4% after 96 h of contact with DPPH radical solution) and very interesting antimicrobial activity when the nanochitosan (NC) fibers are mainly activated as NC-NH3+ form at the surface of the film with 45% reduction and 75% reduction observed for S. aureus (Gram-positive) and E. coli (Gram-negative), respectively, after 6 h of treatment. These promising antimicrobial and antioxidant activities indicated the high potential of valorization toward biomedical applications.

Novel combination of bioactive agents in bilayered dermal patches provides superior wound healing

In present study, multifunctional bilayered dermal patches with antibacterial, antioxidant and anti-inflammatory properties were developed using solvent casting or electrospinning methods and compared for performance. Top layer was made up of polycaprolactone (PCL) and chitosan (CS) while bottom layer was made of polyvinyl alcohol (PVA) with curcumin nanoparticles and soluble eggshell membrane protein (SESM) as the wound healing agents. Curcumin nanoparticles showed reduction in the production of reactive oxygen species (ROS) and inflammatory cytokines and markers in mice T cells or human macrophages, confirming their antioxidant and anti-inflammatory properties while SESM improved migration of human adult dermal fibroblasts, suggesting its contribution to wound healing. The dermal patches were hemocompatible and antibacterial and also provided adequate absorption of wound exudates, support and components required for recruitment of cells and deposition of extracellular matrix to enable superior wound healing than its commercial counterpart in a full thickness excision wound model in rats.

General Characteristics, Biomedical and Dental Application, and Usage of Chitosan in the Treatment of Temporomandibular Joint Disorders: A Narrative Review

The aim of this narrative review was to present research investigating chitosan, including its general characteristics, properties, and medical and dental applications, and finally to present the current state of knowledge regarding the efficacy of chitosan in the treatment of temporomandibular disorders (TMDs) based on the literature. The PICO approach was used for the literature search strategy. The PubMed database was analyzed with the following keywords: (“chitosan”[MeSH Terms] OR “chitosan”[All Fields] OR “chitosans”[All Fields] OR “chitosan s”[All Fields] OR “chitosane”[All Fields]) AND (“temporomandibular joint”[MeSH Terms] OR (“tem-poromandibular”[All Fields] AND “joint”[All Fields]) OR “temporomandibular joint”[All Fields] OR (“temporomandibular”[All Fields] AND “joints”[All Fields]) OR “temporo-mandibular joints”[All Fields]). After screening 8 results, 5 studies were included in this review. Chitosan presents many biological properties and therefore it can be widely used in several branches of medicine and dentistry. Chitosan promotes wound healing, helps to control bleeding, and is used in wound dressings, such as sutures and artificial skin. Apart from its antibacterial property, chitosan has many other properties, such as antifungal, mucoadhesive, anti-inflammatory, analgesic, antioxidant, antihyperglycemic, and antitumoral properties. Further clinical studies assessing the efficacy of chitosan in the treatment of TMD are required. According to only one clinical study, chitosan was effective in the treatment of TMD; however, better clinical results were obtained with platelet-rich plasma.

3D Bioprinting in Skin Related Research: Recent Achievements and Application Perspectives

In recent years, significant progress has been observed in the field of skin bioprinting, which has a huge potential to revolutionize the way of treatment in injury and surgery. Furthermore, it may be considered as an appropriate platform to perform the assessment and screening of cosmetic and pharmaceutical formulations. Therefore, the objective of this paper was to review the latest advances in 3D bioprinting dedicated to skin applications. In order to explain the boundaries of this technology, the architecture and functions of the native skin were briefly described. The principles of bioprinting methods were outlined along with a detailed description of key elements that are required to fabricate the skin equivalents. Next, the overview of recent progress in 3D bioprinting studies was presented. The article also highlighted the potential applications of bioengineered skin substituents in various fields including regenerative medicine, modeling of diseases, and cosmetics/drugs testing. The advantages, limitations, and future directions of this technology were also discussed.

New Chitosan Polymer Scaffold Schiff Bases as Potential Cytotoxic Activity: Synthesis, Molecular Docking, and Physiochemical Characterization

In this work, we synthesize the sulfonated Schiff bases of the chitosan derivatives 2a-2j without the use of a catalyst in two moderately straightforward steps with good yield within a short reaction time. The morphology and chemical structure of chitosan derivatives were investigated using FT-IR, NMR (¹H—¹³C), XRD, and SEM. Furthermore, our chitosan derivatives were tested for their anticancer activity against the MCF-7 cancer cell line, and doxorubicin was used as a standard. In addition, the normal cell lines of the breast cancer cell MCF-10A, and of the lung cell MRC-5 were tested. Compound 2 h, with a GI₅₀ value of 0.02 µM for MCF-7, is highly active compared with the standard doxorubicin and other compounds. The synthesized compounds 2a-2j exhibit low cytotoxicity, with IC₅₀ > 100 μg/ml, against normal cell lines MCF-10A, MRC-5. We also provide the results of an in-silico study involving the Methoxsalen protein (1Z11). Compound 2h exhibits a higher binding affinity for 1Z11 protein (−5.9 kcal/mol) and a lower binding affinity for Doxorubicin (−5.3 kcal/mol) than certain other compounds. As a result of the aforementioned findings, the use of compound 2h has an anticancer drug will be researched in the future.

Controlled Liposome Delivery from Chitosan-Based Thermosensitive Hydrogel for Regenerative Medicine

This work describes the development of an injectable nanocomposite system based on a chitosan thermosensitive hydrogel combined with liposomes for regenerative medicine applications. Liposomes with good physicochemical properties are prepared and embedded within the chitosan network. The resulting nanocomposite hydrogel is able to provide a controlled release of the content from liposomes, which are able to interact with cells and be internalized. The cellular uptake is enhanced by the presence of a chitosan coating, and cells incubated with liposomes embedded within thermosensitive hydrogels displayed a higher cell uptake compared to cells incubated with liposomes alone. Furthermore, the gelation temperature of the system resulted to be equal to 32.6 °C; thus, the system can be easily injected in the target site to form a hydrogel at physiological temperature. Given the peculiar performance of the selected systems, the resulting thermosensitive hydrogels are a versatile platform and display potential applications as controlled delivery systems of liposomes for tissue regeneration.

Chitosan Nanoparticle-Based System: A New Insight into the Promising Controlled Release System for Lung Cancer Treatment

Lung cancer has been recognized as one of the most often diagnosed and perhaps most lethal cancer diseases worldwide. Conventional chemotherapy for lung cancer-related diseases has bumped into various limitations and challenges, including non-targeted drug delivery, short drug retention period, low therapeutic efficacy, and multidrug resistance (MDR). Chitosan (CS), a natural polymer derived from deacetylation of chitin, and comprised of arbitrarily distributed β-(1-4)-linked d-glucosamine (deacetylated unit) and N-acetyl-d-glucosamine (acetylated unit) that exhibits magnificent characteristics, including being mucoadhesive, biodegradable, and biocompatible, has emerged as an essential element for the development of a nano-particulate delivery vehicle. Additionally, the flexibility of CS structure due to the free protonable amino groups in the CS backbone has made it easy for the modification and functionalization of CS to be developed into a nanoparticle system with high adaptability in lung cancer treatment. In this review, the current state of chitosan nanoparticle (CNP) systems, including the advantages, challenges, and opportunities, will be discussed, followed by drug release mechanisms and mathematical kinetic models. Subsequently, various modification routes of CNP for improved and enhanced therapeutic efficacy, as well as other restrictions of conventional drug administration for lung cancer treatment, are covered.

Assessment of the Toxicity of Biocompatible Materials Supporting Bone Regeneration: Impact of the Type of Assay and Used Controls

Assessing the toxicity of new biomaterials dedicated to bone regeneration can be difficult. Many reports focus only on a single toxicity parameter, which may be insufficient for a detailed evaluation of the new material. Moreover, published data frequently do not include control cells exposed to the environment without composite or its extract. Here we present the results of two assays used in the toxicological assessment of materials’ extracts (the integrity of the cellular membrane and the mitochondrial activity/proliferation), and the influence of different types of controls used on the obtained results. Results obtained in the cellular membrane integrity assay showed a lack of toxic effects of all tested extracts, and no statistical differences between them were present. Control cells, cells incubated with chitosan extract or chitosan-bioglass extract were used as a reference in proliferation calculations to highlight the impact of controls used on the result of the experiment. The use of different baseline controls caused variability between obtained proliferation results, and influenced the outcome of statistical analysis. Our findings confirm the thesis that the type of control used in an experiment can change the final results, and it may affect the toxicological assessment of biomaterial.

Cytotoxicity and antiproliferative activity of ethanol and ethyl acetate fractions from polymeric nanoparticles of green tea leaves (Camellia sinensis) in breast cancer cell line MDA-MB-132

Green tea (Camellia sinensis) has benefits. Its main potential content is epigallocatechin gallate, which has many bioactivity and pharmacological properties. However, herbal medicines have limitations on low solubility and stability. A nanoparticle delivery system is a perfect form of active ingredient development, because it can mediate the increase in solubility, dissolution rate, and strength of a targeted delivery system. This study aimed to make and test the formulation of the ethanol and ethyl acetate fraction from green tea leaves in the form of a nanoparticle delivery system using chitosan biopolymer as the primary carrier polymer combined with sodium tripolyphosphate as a crosslinker and then carried out the tests on the MDA-MB-231 breast cancer cell line. The results showed that the particle size value was 199.7 nm, the zeta potential was-56.7 mV, and the polydispersity index was 0.337. X-ray diffraction and differential scanning calorimetry test results showed that the C. sinensis fraction was perfectly dispersed molecularly in the nanoparticle system. The results of the cytotoxic test on the MDA-MB-231 breast cancer cell line obtained IC50 values for both fractions, namely 10.70 μg/mL (nano ethanol fraction) and 12.72 μg/mL (nano ethyl acetate fraction). This result showed a significant increase in anticancer activity in both fractions compared to those not formulated (P < 0.05). These results also show that the C. sinensis tea fraction formulated in a nanoparticle delivery system has a great potential as a new therapeutic agent for breast cancer.

Electrophoretic deposition of hydroxyapatite/chitosan nanocomposites: the effect of dispersing agents on the coating properties

In this study, electrophoretic deposition (EPD) was used for the coating on titanium (Ti) substrate with a composite of hydroxyapatite (HA)-chitosan (CS) in the presence of dispersing agents such as polyvinyl butyral (PVB), polyethylene glycol (PEG), and triethanolamine (TEA). The materials were characterized using X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), zeta potential, and Fourier transform infrared (FT-IR) spectroscopy. The addition of PVB, PEG, and TEA agents improved the development of Ti coating during the EPD process. These additives increased the suspension stability and promoted the formation of uniform and compact HA/CS nanocomposite coatings on Ti substrates. The electrochemical polarization tests (e.g., potentiodynamic test) of the substrate with and without coating were investigated. Data analysis showed high corrosion resistance of Ti substrate coated with the HA/CS NP composite. The corrosion potentials displayed a shift toward positive values indicating the increase in the corrosion resistance of Ti after coating. In addition to measuring calcium ion release at various pH values and contact times at a biological pH value of 5.5, the stabilities of Ti substrates coated with HA/CS and different dispersing agents were also evaluated. Ti substrates with high anticorrosion properties may have a new potential application in biomedicine.

Electrophoretic deposition was used for coating of titanium substrate with a composite of hydroxyapatite (HA)-chitosan (CS) in the presence of polyvinyl butyral (PVB), polyethylene glycol (PEG), and triethanolamine (TEA).

The potential of natural products use in fused deposition modeling 3D printing of pharmaceutical dosage forms

In recent years, the interest in 3D printing of medicines has increased due to many advantages of this technology, such as flexibility of the dose and dosage form of the printed product. Fused deposition modeling (FDM) is one of the most popular 3D printing technologies in the pharmaceutical field, due to its low cost and simplicity. The subject of this review is the potential use of natural products as biodegradable and biocompatible materials with good safety profiles in FDM 3D printing of pharmaceuticals. Natural products such as alginate, chitosan and starch have already been employed as excipients in FDM 3D printed pharmaceutical dosage forms, while others like shellac and zein show the potential, but haven't yet been part of 3D printed pharmaceutical formulations. These excipients have different roles in the formulation of filaments for FDM 3D printing, for example as fillers, matrix carriers or drug-release modifiers. In addition, the possibility of incorporating active pharmaceutical ingredients of natural origin in filaments for FDM 3D printing was reviewed. High printing temperatures limit the use of natural products in FDM 3D printing. However, adequate selection of thermoplastic material and printing parameters can widen the use of natural products in FDM 3D printing of pharmaceutical dosage forms.