A self-fused peptide-loaded hydrogel with injectability and tissue-adhesiveness for preventing postoperative peritoneal adhesions

Peritoneal adhesions commonly occur following abdominal or pelvic surgery and can cause serious complications. Currently, physical barriers are the primary approach used in clinical practice to prevent adhesion, although their effectiveness is frequently inadequate. In this study, we developed an injectable peptide-loaded hydrogel with multiple functions, including self-fusion, tissue-adhesiveness, anti-inflammation, anti-cell adhesion and anti-angiogenesis. To assess the effectiveness of these hydrogels, which are stabilized by dynamic imine bonds and acetal connections, in preventing postoperative abdominal adhesions, we utilized both a rat abdominal adhesion model and a rat model simulating repeated-injury adhesions. In comparison to the commercially available HA hydrogel, as-prepared hydrogels exhibited significant reductions in inflammation, fibrosis, and angiogenesis, leading to an obvious decrease in peritoneal adhesions. Moreover, this peptide-loaded hydrogel demonstrated an ideal degradation time, maintaining an in vivo viability for about 10 days. We believe this peptide-loaded hydrogel presents a promising solution for the challenging clinical issue of postoperative abdominal adhesions.

Polysaccharide base electrospun nanofibrous scaffolds for cartilage tissue engineering: Challenges and opportunities

Polysaccharides, known as naturally abundant macromolecular materials which can be easily modified chemically, have always attracted scientists' interest due to their outstanding properties in tissue engineering. Moreover, their intrinsic similarity to cartilage ECM components, biocompatibility, and non-harsh processing conditions make polysaccharides an excellent option for cartilage tissue engineering. Imitating the natural ECM structure to form a fibrous scaffold at the nanometer scale in order to recreate the optimal environment for cartilage regeneration has always been attractive for researchers in the past few years. However, there are some challenges for polysaccharides electrospun nanofibers preparation, such as poor solubility (Alginate, cellulose, chitin), high viscosity (alginate, chitosan, and Hyaluronic acid), high surface tension, etc. Several methods are reported in the literature for facing polysaccharide electrospinning issues, such as using carrier polymers, modification of polysaccharides, and using different solvent systems. In this review, considering the importance of polysaccharide-based electrospun nanofibers in cartilage tissue engineering applications, the main achievements in the past few years, and challenges for their electrospinning process are discussed. After careful investigation of reported studies in the last few years, alginate, chitosan, hyaluronic acid, chondroitin sulfate, and cellulose were chosen as the main polysaccharide base electrospun nanofibers used for cartilage regeneration.

Applied research and recent advances in the development of flexible sensing hydrogels from cellulose: A review

Flexible wearable smart sensing materials have gained immense momentum, and biomass-based hydrogel sensors for renewable and biologically safe wearable sensors have attracted significant attention in order to meet the growing demand for sustainability and ecological friendliness. Cellulose has been widely used in the field of biomass-based hydrogel sensing materials, being the most abundant biomass material in nature. This review mainly focuses on the types of cellulose hydrogels, the preparation methods and their applications in smart flexible sensing materials. The structure-functional properties-application relationship of cellulose hydrogels and the applications of various cellulose hydrogels in flexible sensing are described in detail. Then it focuses on the methods and mechanisms of cellulose hydrogel flexible sensors preparation, and then summarizes the research of cellulose hydrogel sensors for different types of stimulus response mechanisms to pressure, pH, biomolecules, ions, temperature, humidity, and light. The applications of cellulose hydrogels as flexible sensing materials in biomedical sensing, smart wearable and environmental monitoring are further summarized. Finally, the future development trend of cellulose hydrogels is briefly introduced and the future development of cellulose hydrogel sensing materials is envisioned.

Gelatin-based ionic hydrogel for intelligent fire-alarm system with considerable toughness, flame retardancy, and thermoelectric performance

Temperature-responsive materials with excellent reliability, sensitivity, and flame-retardant properties have always been an urgent need in the field of intelligent fire protection. In this discourse, we introduce a novel thermosensitive ionic hydrogel coating (gelatin/poly(acrylamide-co-acrylic acid)/CaCl2/spindle-shaped aluminum hydroxide nanosheet/glycerol, HCA) synthesized via free radical polymerization. HCA not only demonstrates considerable mechanical properties with a fracture strain of up to 842.5 % and a maximum tensile strength of 0.77 MPa but also exhibits notable flame retardancy and adhesion. It effectively covers combustible surfaces, providing outstanding fire protection. Notably, HCA boasts a Seebeck coefficient of up to 10.1 mV/K, significantly surpassing conventional thermoelectric materials. The well-established linear relationship between the generated voltage and temperature variation enables HCA-based intelligent fire-alarm system to accurately emit continuous alerts during fire incidents and swiftly transmit alarm signals to terminal devices. The development of this intelligent fire-alarm system presents new avenues in intelligent fire-safety technologies.

Ferulic acid-g-tamarind gum/guar gum based in situ gel-forming powders as wound dressings

The current research endeavour aimed to synthesize ferulic acid grafted tamarind gum/guar gum (FA-g-TG/GG) based powders as wound dressings, which could form in situ gels upon contact with wound exudates. In this context, variable amounts of FA were initially grafted with TG via the Steglich esterification reaction protocol and the resulting conjugates were subsequently amalgamated with GG and lyophilized to produce dry powders (F-1 - -F-3) with average particle size within 5.10-5.54 μm and average angle of repose ∼30°. These powders were structurally characterized with 1H NMR, FTIR, DSC, TGA, XRD and SEM analyses. Pristine TG, FA-g-TG and FA-g-TG/GG powders (F-2) revealed their distinct morphological structures and variable negative zeta potential values (-11.06 mV-25.50 mV). Among various formulation (F-1-F-3), F-2 demonstrated an acceptable powder-to-gel conversion time (within 20 min), suitable water vapour transmission rates (WVTR, 2564.94 ± 32.47 g/m2/day) and excellent water retention abilities and swelling profiles (4559.00 ± 41.57 %) in wound fluid. The powders were cytocompatible and conferred antioxidant activities. The powders also displayed fibroblast cell proliferation, migration and adhesion properties, implying their wound-healing potentials. Thus, the developed in situ gel-forming powders could be employed as promising dressings for wound management.

Biophysical translational paradigm of polymeric nanoparticle: Embarked advancement to brain tumor therapy

Polymeric nanoparticles have emerged as promising contenders for addressing the intricate challenges encountered in brain tumor therapy due to their distinctive attributes, including adjustable size, biocompatibility, and controlled drug release kinetics. This review comprehensively delves into the latest developments in synthesizing, characterizing, and applying polymeric nanoparticles explicitly tailored for brain tumor therapy. Various synthesis methodologies, such as emulsion polymerization, nanoprecipitation, and template-assisted fabrication, are scrutinized within the context of brain tumor targeting, elucidating their advantages and limitations concerning traversing the blood-brain barrier. Furthermore, strategies pertaining to surface modification and functionalization are expounded upon to augment the stability, biocompatibility, and targeting prowess of polymeric nanoparticles amidst the intricate milieu of the brain microenvironment. Characterization techniques encompassing dynamic light scattering, transmission electron microscopy, and spectroscopic methods are scrutinized to evaluate the physicochemical attributes of polymeric nanoparticles engineered for brain tumor therapy. Moreover, a comprehensive exploration of the manifold applications of polymeric nanoparticles encompassing drug delivery, gene therapy, imaging, and combination therapies for brain tumours is undertaken. Special emphasis is placed on the encapsulation of diverse therapeutics within polymeric nanoparticles, thereby shielding them from degradation and enabling precise targeting within the brain. Additionally, recent advancements in stimuli-responsive and multifunctional polymeric nanoparticles are probed for their potential in personalized medicine and theranostics tailored for brain tumours. In essence, this review furnishes an all-encompassing overview of the recent strides made in tailoring polymeric nanoparticles for brain tumor therapy, illuminating their synthesis, characterization, and multifaceted application.

Oxidation of Cyclohexane to Cyclohexanol/Cyclohexanone Using Sol-Gel-Encapsulated Unspecific Peroxygenase from Agrocybe aegerita

Unspecific peroxygenase from Agrocybe aegerite (AaeUPO) is a remarkable catalyst for the oxyfunctionalization of non-activated C-H bonds under mild conditions. It exhibits comparable activity to P450 monooxygenase but offers the advantage of using H2O2 instead of a complex electron transport chain to reductively activate O2. Here, we demonstrate the successful oxidation of cyclohexane to cyclohexanol/cyclohexanone (KA-oil) using sol-gel encapsulated AaeUPO. Remarkably, cyclohexane serves both as a solvent and a substrate in this system, which simplifies product isolation. The ratio of cyclohexanone to cyclohexanol using this approach is remarkably higher compared to the oxidation using free AaeUPO in aqueous media using acetonitrile as a cosolvent. The utilization of sol-gel encapsulated AaeUPO offers a promising approach for oxyfunctionalization reactions and improves the chances for this enzyme to be incorporated in the same pot with other chemical transformations.

Aromatic Biobased Polymeric Materials Using Plant Polyphenols as Sustainable Alternative Raw Materials: A Review

In the foreseeable future, the development of petroleum-based polymeric materials may be limited, owing to the gradual consumption of disposable resources and the increasing emphasis on environmental protection policies. Therefore, it is necessary to focus on introducing environmentally friendly renewable biobased materials as a substitute for petroleum-based feed stocks in the preparation of different types of industrially important polymers. Plant polyphenols, a kind of natural aromatic biomolecule, exist widely in some plant species. Benefiting from their special macromolecular structure, high reactivity, and broad abundance, plant polyphenols are potent candidates to replace the dwindling aromatic monomers derived from petroleum-based resources in synthesizing high-quality polymeric materials. In this review, the most related and innovative methods for elaborating novel polymeric materials from plant polyphenols are addressed. After a brief historical overview, the classification, structural characteristics, and reactivity of plant polyphenols are summarized in detail. In addition, some interesting and innovative works concerning the chemical modifications and polymerization techniques of plant polyphenols are also discussed. Importantly, the main chemical pathways to create plant polyphenol-based organic/organic-inorganic polymeric materials as well as their properties and possible applications are systematically described. We believe that this review could offer helpful references for designing multifunctional polyphenolic materials.

Polyvinyl Alcohol (PVA)-Based Hydrogels: Recent Progress in Fabrication, Properties, and Multifunctional Applications

Polyvinyl alcohol (PVA)-based hydrogels have attracted significant attention due to their excellent biocompatibility, tunable mechanical properties, and ability to form stable three-dimensional networks. This comprehensive review explores the recent advancements in PVA-based hydrogels, focusing on their unique properties, fabrication strategies, and multifunctional applications. Firstly, it discusses various facile synthesis techniques, including freeze/thaw cycles, chemical cross-linking, and enhancement strategies, which have led to enhanced mechanical strength, elasticity, and responsiveness to external stimuli. These improvements have expanded the applicability of PVA-based hydrogels in critical areas such as biomedical, environmental treatment, flexible electronics, civil engineering, as well as other emerging applications. Additionally, the integration of smart functionalities, such as self-healing capabilities and multi-responsiveness, is also examined. Despite progress, challenges remain, including optimizing mechanical stability under varying conditions and addressing potential toxicity of chemical cross-linkers. The review concludes by outlining future perspectives, emphasizing the potential of PVA-based hydrogels in emerging fields like regenerative medicine, environmental sustainability, and advanced manufacturing. It underscores the importance of interdisciplinary collaboration in realizing the full potential of these versatile materials to address pressing societal challenges.

Group transfer radical polymerization for the preparation of carbon-chain poly(α-olefins)

Radical polymerization is a powerful technique for producing a variety of polymeric materials. However, the chain transfer reaction impedes the formation of polymers from many common α-olefins such as propene and 1-butene using this method. Consequently, poly(α-olefins) are predominantly produced via coordination polymerization. To address this limitation, we have devised a strategy involving group transfer radical polymerization (GTRP) to facilitate the radical homopolymerization to access carbon-chain poly(α-olefins). This approach enables the precise construction of a diverse array of carbon-chain poly(α-olefins) with high molecular weights. Furthermore, by using nonconventional monomers, we extend the applicability of this technique to the copolymerization of α-olefins with acrylonitrile, paving the way for the synthesis of copolymers with different monomers. To investigate the properties of the polymers obtained by this method, one of the poly(α-olefins) is studied as an interphase layer material in anode-free Li metal batteries, and the results indicate the potential of the polymer in energy storage applications.

Advancement in Soft Hydrogel Grippers: Comprehensive Insights into Materials, Fabrication Strategies, Grasping Mechanism, and Applications

Soft hydrogel grippers have attracted considerable attention due to their flexible/elastic bodies, stimuli-responsive grasping and releasing capacity, and novel applications in specific task fields. To create soft hydrogel grippers with robust grasping of various types of objects, high load capability, fast grab response, and long-time service life, researchers delve deeper into hydrogel materials, fabrication strategies, and underlying actuation mechanisms. This article provides a systematic overview of hydrogel materials used in soft grippers, focusing on materials composition, chemical functional groups, and characteristics and the strategies for integrating these responsive hydrogel materials into soft grippers, including one-step polymerization, additive manufacturing, and structural modification are reviewed in detail. Moreover, ongoing research about actuating mechanisms (e.g., thermal/electrical/magnetic/chemical) and grasping applications of soft hydrogel grippers is summarized. Some remaining challenges and future perspectives in soft hydrogel grippers are also provided. This work highlights the recent advances of soft hydrogel grippers, which provides useful insights into the development of the new generation of functional soft hydrogel grippers.

Functionalized MXene (Ti3C2TX) Loaded with Ag Nanoparticles as a Raman Scattering Substrate for Rapid Furfural Detection in Baijiu

Furfural is an essential compound that contributes to the distinctive flavor of sauce-flavored Baijiu. However, traditional detection methods are hindered by lengthy and complex sample preparation procedures, as well as the need for expensive equipment. Therefore, there is an urgent need for a new approach that allows rapid detection. In this study, we developed a novel surface-enhanced Raman spectroscopy (SERS) substrate by constructing MXene (Ti3C2TX) @Ag nanoparticles (Ag NPs) through an electrostatic attraction method. The MXene (Ti3C2TX) @Ag NPs were successfully fabricated, with adsorbed NaCl-treated Ag NPs uniformly absorbed on the surface of MXene (Ti3C2TX), creating high-density distributed SERS "hot spots". The prepared substrate demonstrated excellent sensitivity, uniformity, repeatability, and long-term stability, with a low detectable concentration of 10-9 M for R6G (Rhodamine 6G) and an enhancement factor of up to 7.08 × 105. When applied for the in situ SERS detection of furfural in Baijiu, the detection limit was as low as 0.5 mg/L. Overall, the proposed method offers rapid, low-cost, and sensitive quantitative analysis, which is significant not only for detecting furfural in Baijiu but also for identifying hazardous substances and distinguishing between authentic and counterfeit Baijiu products.

Magnetically Separable Chiral Poly(ionic liquid) Microcapsules Prepared Using Oil-in-Oil Emulsions

This article presents a method for producing chiral ionic liquid-based polyurea microcapsules that can be magnetically separated. The method involves entrapping hydrophilic magnetic nanoparticles within chiral polyurea microspheres. The synthetic process for creating these magnetic polyurea particles involves oil-in-oil (o/o) nano-emulsification of an ionic liquid-modified magnetite nanoparticle (MNPs-IL) and an ionic liquid-based diamine monomer, which comprises a chiral bis(mandelato)borate anion, in a nonpolar organic solvent, toluene, and contains a suitable surfactant. This is followed by an interfacial polycondensation reaction between the isocyanate monomer, polymethylenepolyphenyl isocyanate (PAPI 27), and the chiral diamine monomer, which generates chiral polyurea microcapsules containing magnetic nanoparticles within their cores. The microcapsules generated from the process are then utilized to selectively adsorb either the R or S enantiomer of tryptophan (Trp) from a racemic mixture that is dissolved in water, in order to evaluate their chiral recognition capabilities. During the experiments, the magnetically separable chiral poly(ionic liquid) microcapsules, which incorporated either the R or S isomer of chiral bis(mandelato)borate, exhibited exceptional enantioselective adsorption performance. Thus, the chiral polymeric microcapsules embedded with the R-isomer of the bis(mandelato)borate anion demonstrated significant selectivity for adsorbing L-Trp, yielding a mixture with 70% enantiomeric excess after 96 h. In contrast, microcapsules containing the S-isomer of the bis(mandelato)borate anion preferentially adsorbed D-Trp, achieving an enantiomeric excess of 73% after 48 h.

Exploring strategies for valorizing wood processing waste: advancing sustainable, fully lignocellulosic biocomposites

This study presents the design and synthesis of bio-composites exhibiting high properties, wherein both the matrix and filler originate from wood biomass. Notably, no additional hardener compounds or treatments/modifications of the lignocellulosic filler were employed. Thermosetting materials were developed by homopolymerizing a bio-based aromatic epoxy monomer, the resorcinol diglycidyl ether (RDGE), with different percentages, from 1 wt% to 30 wt% of natural wood processing side-product, such as spruce bark powder (SB), which was used as such without additional treatments and modifications. The DSC analyses revealed enhanced reactivities with the bio-filler content, resulting in a reduced reaction temperature range and maximum reaction temperature. These findings provide evidence of the chemical interaction between the functional groups from spruce bark and the epoxides groups. The obtained fully based lignocellulosic materials show high E' values from 2.4 GPa to 2.5-3.5 GPa (glassy state) and from 64 MPa to 99-156 MPa in the rubbery region. The damping factor of the bio-composites with 1-10 wt% SB have shown an increase of the α transition temperature from 92 °C to 94-97 °C. The excellent filler/matrix interface and optimal adhesion between them were confirmed by SEM analysis.

A review on recent progress in polymer composites for effective electromagnetic interference shielding properties - structures, process, and sustainability approaches

The rapid proliferation and extensive use of electronic devices have resulted in a meteoric increase in electromagnetic interference (EMI), which causes electronic devices to malfunction. The quest for the best shielding material to overcome EMI is boundless. This pursuit has taken different directions, right from materials to structures to process, up to the concept of sustainable materials. The emergence of polymer composites has substituted metal and metal alloy-based EMI shielding materials due to their unique features such as light weight, excellent corrosion resistance, and superior electrical, dielectric, thermal, mechanical, and magnetic properties that are beneficial for suppressing the EMI. Therefore, polymer nanocomposites are an extensively explored EMI shielding materials strategy. This review focuses on recent research developments with a major emphasis on structural aspects and processing for enhancing the EMI shielding effectiveness of polymer nanocomposites with their underlying mechanisms and some glimpses of the sustainability approaches taken in this field.

Hybrid Core-Shell TiCN@SiO2 Nanoparticles in Percolation-Based Polyvinylidene Fluoride Dielectrics for Improved High-Voltage Capacitive Energy Storage

Solid-state polymer dielectrics offer an exceptional dielectric breakdown, but require an enhanced energy density to be competitive with alternative electrolyte-based energy storage technologies. Therefore, this research introduces conductive titanium carbonitride (TiCN) nanoparticles in a polyvinylidene fluoride (PVDF) matrix to obtain flexible percolation-based nanodielectrics by ultrasonication-based suspension processing and hot pressing. Well-dispersed TiCN nanoparticles in PVDF were obtained for a wide range of filler volume fractions, and an exceptional peak in the dielectric constant equal to 1130 (0.1 Hz) and 29 (10 kHz) was observed near the percolation threshold (9.2 vol %). The enhanced dielectric constant was ascribed to massive interfacial polarization occurring, resulting from Maxwell-Wagner-Sillars (MWS) polarization and a nanocapacitor mechanism that are dominant at low and high frequencies, respectively. An improvement by 30% in the energy density (0.042 Wh kg-1) compared with the neat PVDF matrix was achieved for the PVDF/TiCN nanodielectrics. The first successful uniform deposition of a nanometer-thin (3 nm) silica (SiO2) shell via the Stöber process on TiCN nanoparticles significantly suppressed the dielectric losses near percolation for the PVDF/TiCN@SiO2 nanodielectrics by more than 1 order of magnitude while offering dielectric constants of 34 (0.1 Hz) and 10 (10 kHz). This study demonstrates the potential of hybrid (core-shell) percolation-based dielectrics for an improved capacitive dielectric performance by an integrated dielectric characterization approach that simultaneously optimizes the dielectric constant, loss tangent, breakdown strength, and energy density.

Size-tailored and acid-degradable polyvinyl alcohol microgels for inhalation therapy of bacterial pneumonia

Administration of antibiotics via inhalation is considered an effective strategy for pneumonia treatment; however, it encounters challenges related to the development of drug formulations with precise particle sizes and controlled release profiles. Herein, size-tailored and acid-degradable polyvinyl alcohol (PVA) microgels are utilized for nebulized inhalation delivery of piperacillin (PIP) antibiotics to effectively treat pneumonia. These microgels loaded with PIP (G@PIP) were prepared through the UV-crosslinking of thermo-triggered vinyl ether methacrylate-functionalized PVA (PVAVEMA) micro-aggregates in aqueous solution. The size of G@PIP microgels could be tailored by adjusting concentrations during the crosslinking process above phase-transition temperature at 15 °C. Additionally, under simulated inflammatory acidic conditions, the G@PIP microgels degraded and released PIP with relatively high inhibition efficiency against E. coli. Furthermore, in vivo therapeutic outcomes revealed that inhalational delivery of G@PIP microgel with a medium-size of 3.5 μm (G-3.5@PIP) exhibited superior lung deposition compared to other microgel sizes owing to its reduced exhalation and enhanced diffusion capacity within the pulmonary system. The high accumulation of G-3.5@PIP significantly reduced E. coli infection and associated inflammation while maintaining the biocompatibility of the microgels. Overall, these acid-degradable PVA microgels offer a versatile and efficacious inhalation therapy for pneumonia-associated infections.

Stretchable Distributed Bragg Reflectors as Strain-Responsive Mechanochromic Sensors

Mechanochromic materials exhibit color changes upon external mechanical stimuli, finding wide-ranging applications in colorimetric sensing, display technology, and anticounterfeiting measures. Many of these materials rely on fluorescence properties and therefore necessitate external optical or electrical excitation. However, for broader applicability, the detection of color changes by the naked eye only or without complicated detection instrumentation is highly desirable. Photonic crystals offer a promising avenue for attaining such performances. In this work, we present elastomeric distributed Bragg reflectors (DBRs) characterized by a series of photonic bandgaps exhibiting mechanochromic response from the near-infrared to the visible wavelengths. To achieve this, we engineered alternating thin films of a thermoplastic fluoropolymer and a styrene-butadiene copolymer using different elastomeric substrates to attain different behaviors. The reported system demonstrates a reversible and instantaneous shift of the photonic bandgaps in response to 100% strain in multiple deformation cycles. Comparing the DBR stress-strain response with the optical strain response confirms a mechanochromic sensitivity of ∼1.7-6.9 nm/% and ∼80 nm/MPa, with an optical Poisson's ratio in the range 0.3-0.7. All these properties are spectrally dependent, as demonstrated by exploiting the properties of different diffraction order photonic band gaps.

Highly Stretchable Composite Conductive Fibers (SCCFs) and Their Applications

Stretchable composite conductive fibers (SCCFs) exhibit remarkable conductivity, stretchability, breathability, and biocompatibility, making them ideal candidates for wearable electronics and bioelectronics. The exploitation of SCCFs in electronic devices requires a careful balance of many aspects, including material selection and process methodologies, to address the complex challenges associated with their electrical and mechanical properties. In this review, we elucidate the conductive mechanism of SCCFs and summarize strategies for integrating various conductors with stretchable fibers, emphasizing the primary challenges in fabricating highly conductive fibers. Furthermore, we explore the multifaceted applications of SCCFs-based frameworks in wearable electronic devices. This review aims to emphasize the significance of SCCFs and offers insights into their conductive mechanisms, material selection, manufacturing technologies, and performance improvement. Hopefully, it can guide the innovative development of SCCFs and broaden their application potential.

Polypyrrole as Adsorbent in Magnetic Solid Phase Extraction for Progesterone Determination from Human Plasma

A straightforward and effective chromatographic method has been created for the analysis of progesterone from human plasma using a composite based on polypyrrole/magnetic nanoparticles in the sample preparation procedure. The quantification of progesterone is necessary due to its importance in human development and fertility. The employed conditions used acetonitrile:ultrapure water (70:30, v/v) as the mobile phase at 1.0 mL min-1 and an octadecyl silane column (Phenomenex Gemini, 250 mm × 4.6 mm, 5 μm) at a wavelength of 235 nm. The composite and its precursors were synthesized and properly characterized by X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy/energy dispersive spectroscopy, thermogravimetric analysis, and point of zero charge. The main factors affecting the extraction recovery of progesterone from pool human plasma samples employing magnetic solid phase extraction have been studied, such as sample pH (without adjustment), sample volume (1000 μL), washing solvent (ultrapure water), eluent (acetonitrile), eluent volume (1000 μL), and amount of adsorbent (10 mg). The extraction recoveries ranged from 98% to 102%, and linearity ranged from 5 to 3000 ng mL-1. The correlation coefficient (r) was ≥0.99, and acceptable relative standard deviation (precision), relative error (accuracy), and p-values (robustness) were observed. Lastly, the plasma samples from pregnant women were successfully analyzed by the validated method.

Microplastics abundance and potential ecological risk assessment in sediment, water and fish of Deepor Beel-a Ramsar Wetland of the Brahmaputra plain, India

Microplastics (MPs) are increasingly recognized as environmental contaminants with complex impacts on fish and other aquatic organisms. This study determined the microplastics abundance and the induced-ecological risks of microplastics in water, sediment, and commonly harvested fishes of a Ramsar site, Deepor Beel of Assam, India. Six samples of water and sediment were collected with nine individuals of two commonly harvested fish species Puntius sophore (Pool Barb) and Gudusia chapra (Indian River Shad). The abundance of microplastics in water and sediments were analyzed through organic matter digestion using hydrogen peroxide (H2O2, 30%) and sodium chloride (NaCl) for density separation. Potassium hydroxide (KOH, 10%) was used for digestion of fish gut. The microplastics were identified visually and chemically characterized through micro-Raman spectroscopy. Total 467 microplastic particles in water and sediment, and 62 particles in fish were identified. An average concentration of 0.55 ± 0.06 particles/L in water, 4.03 ± 0.41 particles/100 g in sediment samples, 3.83 ± 2.26 particles/individual in Puntius sophore, and 6.5 ± 3.40 particles/individual in Gudusia chapra were detected. Fibers accounted to the major shape of microplastic in water (54%) and sediment (50%), whereas fragments (65%) were the major shapes detected in both fishes. The color composition includes blue, black, red, green, brown, yellow, and transparent. Fiber particles size ranged between 150 and 1782 µm, fragments within 85-325 µm, and sphere within 85-220 µm. Chemical characterization of microplastics revealed polymer types including polypropylene (PP = 27%), polyvinyl chloride (PVC = 25%), acrylonitrile-butadiene-styrene (ABS = 18%), polycarbonate (PC = 13%), polyethylene (12%), and polystyrene (PS = 5%). PHI levels were at hazard level III and V for water and sediment samples and at level IV for both fish species. The PLI at hazard level I indicated low pollution levels, whereas the PERI were within danger and extreme danger levels. This study is the first report in abundances of microplastics and the ecological risk assessment of microplastics in surface waters, sediments and fishes of Deepor Beel wetland.

Self-Healing Composites: A Path to Redefining Material Resilience-A Comprehensive Recent Review

Polymeric composites are prone to undergoing damage, such as microcracks, during their operation, which can ultimately lead to catastrophic failure. To contradict such a problem, efforts have been carried out, by the scientific community, towards developing self-healing composites that, by mimicking biological systems, can autonomously and prematurely repair flaws, extending the durability and improving the security of materials. The present review explores the progress made in this area, focusing on extrinsic self-healing methods, as these can be employed to a variety of materials. Reservoir-based techniques, which resort to capsules, hollow fibers or microvascular networks, and thermoplastic-based ones are overviewed, prioritizing innovative approaches made in recent years. At last, promising practical applications for self-healing composites are highlighted and future challenges and opportunities are pointed out.

Innovative lipid nanoparticles: A cutting-edge approach for potential renal cell carcinoma therapeutics

The kidney plays a crucial role in regulating homeostasis within the human body. Renal cell carcinoma (RCC) is the most common form of kidney cancer, accounting for nearly 90 % of all renal malignancies. Despite the availability of various therapeutic strategies, RCC remains a challenging disease due to its resistance to conventional treatments. Nanotechnology has emerged as a promising field, offering new opportunities in cancer therapeutics. It presents several advantages over traditional methods, enabling diverse biomedical applications, including drug delivery, prevention, diagnosis, and treatment. Lipid nanoparticles (LNPs), approximately 100 nm in size, are derived from a range of lipids and other biochemical compounds. these particulates are designed to overcome biological barriers, allowing them to selectively accumulate at diseased target sites for effective therapeutic action. Many pharmaceutically important compounds face challenges such as poor solubility in aqueous solutions, chemical and physiological instability, or toxicity. LNP technology stands out as a promising drug delivery system for bioactive organic compounds. This article reviews the applications of LNPs in RCC treatment and explores their potential clinical translation, identifying the most viable LNPs for medical use. With ongoing advancement in LNP-based anticancer strategies, there is a growing potential to improve the management and treatment of renal cancer.

Urchin-like WO3 Particles Form Honeycomb-like Structured PLA/WO3 Nanocomposites with Enhanced Crystallinity, Thermal Stability, Rheological, and UV-Blocking and Antifungal Activity

The development of poly(lactic acid) (PLA) nanocomposites incorporating urchin-like WO3 particles through a cost-effective solution-casting method has led to significant enhancements in structural, thermal, optical, and rheological properties. The incorporation of these WO3 particles up to 7 wt% resulted in the formation of an irregular honeycomb-like morphology with broad pore sizes ranging from 14.1 to 24.7 µm, as confirmed by SEM and EDX analysis. The urchin-like WO3 particles acted as effective nucleating agents, increasing the crystallinity of PLA from 40% to 50% and achieving an impressive overall crystallinity rate of 97%. Differential scanning calorimetry (DSC) revealed an 11 K reduction in the crystalline phase transition temperature while maintaining stable melting (Tm) and glass transition (Tg) temperatures. Thermal analysis indicated a significant decrease in the onset of degradation and maximum thermal stability (Tmax), with a reduction of 21 K due to the incorporation of the WO3 particles. Optical measurements showed enhancement of UV-blocking properties from 9% to 55% with the WO3 particle loading. Rheological tests demonstrated substantial improvements in viscoelastic properties, including a remarkable 30-fold increase in storage modulus, suggesting enhanced gel formation. Although the nanocomposites showed minimal antibacterial activity against Escherichia coli and Staphylococcus aureus, they exhibited significant antifungal activity against Candida albicans. These results underscore the potential of the PLA/WO3 nanocomposites for advanced material applications, particularly where enhanced mechanical, thermal, optical, and antifungal performance is required.

1-Tetradecanol phase change material microcapsules coating on cotton fabric for enhanced thermoregulation

Rising climate change and extreme weather conditions underpin thermoregulation limitations of conventional textiles. This study investigates enhancing the thermal properties of cotton fabric by incorporating synthesized 1-tetradecanol (TD) phase change material (PCM) microcapsules. Characterization of the TD microcapsules was performed using dynamic light scattering (DLS), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). The microcapsules (average size of 0.49 μm) displayed a melting enthalpy (∆Hm) of 105 J·g-1 and a crystallization enthalpy (∆Hc) of 51 J·g-1. The microcapsules were mixed with the acrylic binder in three different ratios (75:25, 50:50, and 25:75). Hydrothermal, knife-over-roll, and pad-dry-cure methods were employed for coating microcapsules to cotton fabric. Microcapsule coating on cotton fabric using hydrothermal coating with a 75:25 microcapsule binder ratio achieved the highest add-on (55 %) and good durability after 25 home washes. The thermal insulation R-value of the coated fabric was enhanced (0.0029 m2 K·W-1) at 40 °C. The real-time test showed a temperature difference of 2.8 °C and thermal imaging displayed lower emissivity for TD-coated fabric. The TD microcapsule coating offers a promising method for developing climate-responsive textiles, enhancing thermal comfort, and reducing energy consumption in heating and cooling systems.

A comprehensive review on polylactic acid/lignin composites - Structure, synthesis, performance, compatibilization, and applications

Today, the world is facing a great problem of plastic pollution due to its non-degradable nature. Alternatively, polylactic acid (PLA), a bio-based and biodegradable polymer, is emerging as a promising substitute for conventional, non-biodegradable plastics. However, its high cost, limited properties, and single functionality hinder its wide application. Lignin, a natural and sustainable biomass derived from plant cell walls, has become a promising filler for PLA. The integration of lignin into PLA composites holds the potential to realize the trifecta of low cost, high performance, and multifunctional properties while maintaining the principles of biodegradation and sustainability. However, the poor compatibility between PLA and lignin severely affects their overall performance, which creates a major challenge for the development of PLA/lignin composites. In recent years, a significant of advancements have been achieved in addressing this challenge. In this review, we provide a systematic insight into PLA/lignin composites, focusing on numerous compatibilization strategies including physical addition and chemical modification, and the progress on the structural characteristics, synthesis methods, performance improvements brought by lignin, and multiple applications. Finally, the existing problems and developmental direction of PLA/lignin composites are discussed. We believe that this review can be useful for future research prospects and industrial applications.

Influence of Plant Additives on Antimicrobial Properties of Glass-Fabric-Reinforced Epoxy Composites Used in Railway Transport

The aim of this research was to explore the innovative use of natural additives, containing phytochemicals with proven antimicrobial effects, in the production of epoxy-glass composites. This study was based on information regarding the antimicrobial effects of phytochemicals present in Cistus incanus, Zingiber officinale, and Armoracia rusticana. The additives were subjected to a gas chromatography (GC) analysis to determine their composition, and, subsequently, they were used to prepare resin mixtures and to produce epoxy-glass composites. Samples of the modified materials were tested against E. coli, S. aureus, and C. albicans. In addition, flammability and durability tests were also performed. It was found that the strongest biocidal properties were demonstrated by the material with the addition of cistus, which caused a reduction of microorganisms by 2.13 log units (S. aureus), 1.51 log units (E. coli), and 0.81 log units (C. albicans). The same material also achieved the most favorable results of strength tests, with the values of flexural strength and tensile strength reaching 390 MPa and 280 MPa, respectively. Public transport is a place particularly exposed to various types of pathogens. Currently, there are no solutions on the railway market that involve the use of composites modified in this respect.

Rubber-lignin-ammonium polyphosphate bio-composite foams: Fabrication, thermomechanical properties and flame retardancy

Bio-composite foams based on Epoxidized Natural Rubber (ENR) filled with lignin (LG) and ammonium polyphosphate (APP) were fabricated via batch foaming. The addition of APP accelerated the foaming process at lower temperatures. Pre-mixing induced ionic and hydrogen bonding between the LG and the APP particles, which reduced crosslinking between LG and ENR. The resulting ENR bio-composite foams with LG/APP exhibited a significant increase in compressive strength (up to 700 %) and modulus (up to 600 %) compared to the ENR foam baseline. Furthermore, the LG/APP foams demonstrated lower thermal conductivity than both the ENR foam baseline and foams containing only LG or APP, attributed to optimal thermal conduction in the solid phase and convection within the pore cells. The combination of APP and LG produced synergistic effects, with phosphorus (from APP) and high carbon content (from LG) enhancing flame-retardant efficiency. This study highlights the potential of these sustainable bio-composite foams for applications requiring enhanced thermal insulation and flame retardancy attributes for insulation and other practical applications.

Recent advances on chitosan/hyaluronic acid-based stimuli-responsive hydrogels and composites for cancer treatment: A comprehensive review

Cancer, as leading cause of death, has a high rate of mortality worldwide. Although there is a wide variety of conventional approaches for the treatment of cancer (such as surgery and chemotherapy), they have considerable drawbacks in terms of practicality, treatment efficiency, and cost-effectiveness. Therefore, there is a fundamental requirement for the development of safe and efficient treatment modalities based on breakthrough technologies to suppress cancer. Chitosan (CS) and hyaluronic acid (HA) polysaccharides, as FDA-approved biomaterials for some biomedical applications, are potential biopolymers for the efficient treatment of cancer. CS and HA have high biocompatibility, bioavailability, biodegradability, and immunomodulatory function which guarantee their safety and non-toxicity. CS-/HA-based hydrogels (HGs)/composites stand out for their potential anticancer function, versatile preparation and modification, ease of administration, controlled/sustained drug release, and active and passive drug internalization into target cells which is crucial for efficient treatment of cancer compared with conventional treatment approaches. These HGs/composites can respond to external (magnetic, ultrasound, light, and thermal) and internal (pH, enzyme, redox, and ROS) stimuli as well which further paves the way to their manipulation, targeted drug delivery, practicality, and efficient treatment. The above-mentioned properties of CS-/HA-based HGs/composites are unique and practical in cancer treatment which can ignore the deficiencies of conventional approaches. The present manuscript comprehensively highlights the advances in the practical application of stimuli-responsive HGs/composites based on CS/HA polysaccharides.

Coniferous Bark as Filler for Polylactic Acid-Based Biocomposites

This study explores the possibilities of utilisation of coniferous bark as a filler in wood-polymer composites (WPCs), its impact on properties such as the modulus of rupture (MOR), modulus of elasticity (MOE), thickness swelling (TS) and water absorption (WA) after 2 h and 24 h of immersion in water and the significance of this impact compared to other factors. Six variants of bark-polylactic acid (PLA) WPCs were manufactured, differentiated by their filler content and filler particle size. As a comparison, analogous composites filled with coniferous sawdust were also manufactured. Bark-filled composites were characterised by lower TS and WA after both 2 h and 24 h of immersion, as well as lower water contact angles and surface free energy. The bark filler decreased the composites' MORs and MOEs, while greater differences were noticed for variants filled with small particles. The type of filler was the second most important factor contributing to variance in this study, with the filler content being the most important one.

Advanced Functional Electromagnetic Shielding Materials: A Review Based on Micro-Nano Structure Interface Control of Biomass Cell Walls

Research efforts on electromagnetic interference (EMI) shielding materials have begun to converge on green and sustainable biomass materials. These materials offer numerous advantages such as being lightweight, porous, and hierarchical. Due to their porous nature, interfacial compatibility, and electrical conductivity, biomass materials hold significant potential as EMI shielding materials. Despite concerted efforts on the EMI shielding of biomass materials have been reported, this research area is still relatively new compared to traditional EMI shielding materials. In particular, a more comprehensive study and summary of the factors influencing biomass EMI shielding materials including the pore structure adjustment, preparation process, and micro-control would be valuable. The preparation methods and characteristics of wood, bamboo, cellulose and lignin in EMI shielding field are critically discussed in this paper, and similar biomass EMI materials are summarized and analyzed. The composite methods and fillers of various biomass materials were reviewed. this paper also highlights the mechanism of EMI shielding as well as existing prospects and challenges for development trends in this field.

Hybrid Hydroxyapatite-Metal Complex Materials Derived from Amino Acids and Nucleobases

Calcium phosphates (CaPs) and their substituted derivatives encompass a large number of compounds with a vast presence in nature that have aroused a great interest for decades. In particular, hydroxyapatite (HAp, Ca10(OH)2(PO4)6) is the most abundant CaP mineral and is significant in the biological world, at least in part due to being a major compound in bones and teeth. HAp exhibits excellent properties, such as safety, stability, hardness, biocompatibility, and osteoconductivity, among others. Even some of its drawbacks, such as its fragility, can be redirected thanks to another essential feature: its great versatility. This is based on the compound's tendency to undergo substitutions of its constituent ions and to incorporate or anchor new molecules on its surface and pores. Thus, its affinity for biomolecules makes it an optimal compound for multiple applications, mainly, but not only, in biological and biomedical fields. The present review provides a chemical and structural context to explain the affinity of HAp for biomolecules such as proteins and nucleic acids to generate hybrid materials. A size-dependent criterium of increasing complexity is applied, ranging from amino acids/nucleobases to the corresponding macromolecules. The incorporation of metal ions or metal complexes into these functionalized compounds is also discussed.

Next-Generation Structural Adhesives Composed of Epoxy Resins and Hydrogen-Bonded Styrenic Block Polymer-Based Thermoplastic Elastomers

Structural adhesives are currently applied in the assembly of automobiles, aircraft, and buildings. In particular, epoxy adhesives are widely used due to their excellent mechanical strength and durability. However, cured epoxy resins are typically rigid and inflexible; thus, they have low peel and impact strength. In this study, tough cured epoxy adhesives were developed by mixing a liquid epoxy prepolymer (EP) and polystyrene-b-polyisoprene-b-polystyrene (SIS). SIS is a block polymer-based thermoplastic elastomer (TPE) composed of polystyrene (S) soluble in liquid EP and polyisoprene (I) insoluble in liquid EP, where S and I have a glass transition temperature that is higher and lower than room temperature, respectively. In addition, cured adhesives tougher than the cured adhesives containing SIS were prepared by mixing liquid EP and SIS with hydrogen-bonding groups in the I block (h-SIS). Transmission electron microscopy (TEM) observations revealed mixed S/cured EP domains, with a d-spacing of several tens of nanometers, and cured EP domains, with diameters of one hundred to several hundred nanometers, that were macroscopically dispersed in the I or hydrogen-bonded I matrix of the cured adhesive containing SIS or h-SIS. The lap shear, peel, and impact strength of cured neat EP (EP*) were 23 MPa, 45 N/25 mm, and 0.62 kN/m, respectively. Meanwhile, the cured adhesive containing 16.5 wt % SIS exhibited the slightly lower lap shear strength of 17 MPa compared to that of cured EP*, whereas the peel and impact strength of the cured adhesive with SIS were 61 N/25 mm and 7.1 kN/m, respectively, both higher than those of EP*. Furthermore, the lap shear strength of the cured adhesive containing 15.5 wt % h-SIS was 21 MPa, which was similar to that of cured EP*. The cured adhesive with h-SIS also exhibited an excellent peel strength of 97 N/25 mm and an impact strength of 14 kN/m which was 22 times higher than that of cured EP*. Therefore, mixing liquid EP and SIS improved the cured adhesive properties and flexibility of the cured epoxy adhesives compared to the cured adhesive composed of neat EP, and further enhancement of the adhesive properties was achieved by mixing liquid EP and h-SIS with hydrogen-bonding groups instead of mixing with SIS.

Preparation and Characterization of Graphene Oxide/Carbon Nanotube/Polyaniline Composite and Conductive and Anticorrosive Properties of Its Waterborne Epoxy Composite Coatings

The organic coating on the surface is common and the most effective method to prevent metal materials from corrosion. However, the corrosive medium can penetrate the metal surface via micropores, and electrons cannot transfer in the pure resin coatings. In this paper, a new type of anticorrosive and electrically conductive composite coating filled with graphene oxide/carbon nanotube/polyaniline (GO/CNT/PANI) nanocomposites was successfully prepared by in situ polymerization of aniline (AN) on the surface of GO and CNT and using waterborne epoxy resin (WEP) as film-forming material. The structure and morphology of the composite were characterized using a series of characterization methods. The composite coatings were comparatively examined through resistivity, potentiodynamic polarization curves, electrochemical impedance spectroscopy (EIS), and salt spray tests. The results show that the GO/CNT/PANI/WEP composite coating exhibits excellent corrosion resistance for metal substrates and good conductivity when the mass fraction of GO/CNT/PANI is 3.5%. It exhibits a lower corrosion current density of 4.53 × 10-8 A·cm-2 and a higher electrochemical impedance of 3.84 × 106 Ω·cm2, while only slight corrosion occurred after 480 h in the salt spray test. The resistivity of composite coating is as low as 2.3 × 104 Ω·cm. The composite coating possesses anticorrosive and electrically conductive properties based on the synergistic effect of nanofillers and expands the application scope in grounding grids and oil storage tank protection fields.

Spinning a Sustainable Future: Electrospun Polysaccharide-Protein Fibers for Plant-Based Meat Innovation

This study aims to evaluate the feasibility of producing electrospun fibers by combining polysaccharides, zein, and poly(ethylene oxide) (PEO) to simulate the fibers applied in plant-based meat analogs. The rheological properties of biopolymer solutions were evaluated, and the electrospun fibers were characterized according to their morphology, structural interactions, and thermal analysis. The results indicated that the fibers prepared in a ratio of 90:10 of zein/carrageenan from the mixture of a solution containing 23 wt.% of zein with a solution containing 1 wt.% of carrageenan and with the addition of 1 wt.% of PEO presented a promising structure for application as fibers in meat analogs because they have a more hydrophilic surface. Thus, they have good moisture retention. In addition, they have good thermal stability at high temperatures, which is crucial to achieve a consistent and pleasant texture. Furthermore, it was observed that adding zein and PEO helps with the spinnability of the polysaccharides, producing fibers with good homogeneity.

Regenerated nanofibrous cellulose electrospun from ionic liquid: Tuning properties toward tissue engineering

Regenerated fibrous cellulose possesses a unique set of properties, including biocompatibility, biodegradability, and high surface area potential, but its applications in the biomedical sector have not been sufficiently explored. In this study, nanofibrous cellulose matrices were fabricated via a wet-electrospinning process using a binary system of the solvent ionic liquid (IL) 1-butyl-3-methylimidazolium acetate (BMIMAc) and co-solvent dimethyl sulfoxide (DMSO). The morphology of the matrices was controlled by varying the ratio of BMIMAc versus DMSO in the solvent system. The most effective ratio of 1:1 produced smooth fibers with diameters ranging from 200 to 400 nm. The nanofibrous cellulose matrix showed no cytotoxicity when tested on mouse fibroblast L929 cells whose viability remained above 95%. Human triple-negative breast cancer MDA-MB-231 cells also exhibited high viability even after 7 days of seeding and were able to penetrate deeper layers of the matrix, indicating high biocompatibility. These properties of nanofibrous cellulose demonstrate its potential for tissue engineering and cell culture applications.

Ratiometric Molecularly Imprinted Particle Probes for Reliable Fluorescence Signaling of Carboxylate-Containing Molecules

In addition to sensitivity, selectivity, and portability, chemical sensing systems must generate reliable signals and offer modular configurability to address various small molecule targets, particularly in environmental applications. We present a versatile, modular strategy utilizing ratiometric molecularly imprinted particle probes based on BODIPY indicators and dyes for recognition and internal referencing. Our approach employs polystyrene core particles doped with a red fluorescent BODIPY as an internal standard, providing built-in reference for environmental influences. A molecularly imprinted polymer (MIP) recognition shell, incorporating a green-fluorescent BODIPY indicator monomer with a thiourea binding site for carboxylate-containing analytes, is grafted from the core particles in the presence of the analyte as the template. The dual-fluorescent MIP probe detects fexofenadine as the model analyte with a change in green emission signal referenced against a stable red signal, achieving a detection limit of 0.13 μM and a broad dynamic range from 0.16 μM to 1.2 mM, with good discrimination against other antibiotics in acetonitrile. By selecting a versatile dye scaffold and recognition element, this approach can be extended to other carboxylate-containing analytes and/or wavelength combinations, potentially serving as a robust multiplexing platform.

The emerging role of nanoscaffolds in chronic diabetic wound healing: a new horizon for advanced therapeutics

Non-healing or chronic wounds in extremities that lead to amputations in patients with Type II diabetes (hyperglycemia) are among the most serious and common health problems in the modern world. Over the past decade, more efficient solutions for diabetic ulcers have been developed. Nanofibers and/or composite materials capable of drug delivery, moisture control, and antibacterial effectiveness are increasingly utilized in the formulation of wound dressings, with a particular focus on the biofunctionalization of polymeric and hydrogel materials. Natural products, including plant extracts, honey, antibacterial agents, nanozymes, and metal nanoparticles, are now commonly and effectively implemented to enhance the functionality of wound dressings. Due to the complicated and dysfunctional physiological structure of the chronic wound sites in the extremities of diabetic patients, formulated nanoscaffold or hydrogel components are becoming more intricate and versatile. This study aimed to investigate the development of wound dressing materials over the years while demonstrating their progressively enhanced complexity in effectively targeting, treating, and managing chronic wounds. The mechanisms of action and bio-functionality of wound dressing technologies were elucidated based on findings from 290 studies conducted over the last decade. A notable observation that emerged from these studies is the evolution of wound dressing development technology, which has led to significant advancements in the operational range of smart systems. These include, but are not limited to, self-healing, self-oxygenation, and adaptable mimicry of human tissue.

Computational investigation of the effects of polymer grafting on the effective interaction between silica nanoparticles in water

Understanding and control of the effective interaction between nanoscale building blocks (colloids or nanoparticles) dispersed in a solvent is an important prerequisite for the development of bottom-up design strategies for soft functional materials. Here, we have employed all-atom molecular dynamics simulations to investigate the impact of polymer grafting on the solvent-mediated effective interaction between the silica nanoparticles (Si-NPs) in water, and in turn, on its bulk structural and thermodynamic properties. We found that the nature of the short grafting polymers [characterized by their interaction with water (hydrophobicity or hydrophilicity) and molecular weight] has a profound effect on the range and strength of the effective interaction between the Si-NPs. The hydrophobic polymer [such as polyethylene (PE)]-grafting of Si-NP gives rise to a more attractive interaction between the Si-NPs compared to the hydrophilic polymer [such as polyethylene glycol (PEG)] and non-grafted cases. This study further provides fundamental insights into the molecular origin of the observed behavior of the effective pair interactions between the grafted Si-NPs. For PE-grafted Si-NPs, the confined water (water inside the cavity formed by a pair of Si-NPs) undergoes a partial dewetting transition on approaching below a critical inter-particle separation leading to a stronger attractive interaction. Furthermore, we report that the effective attraction between the PE-grafted Si-NPs can be reliably controlled by changing the grafting PE density. We have also investigated the bulk structural and thermodynamic behavior of the coarse-grained Si-NP system where the particles interact via effective interaction in the absence of water. We believe that the insights gained from this work are important prerequisites for formulating rational bottom-up design strategies for functional materials where nano- (or, colloidal) particles are the building blocks.

The Development of Poly(lactic acid) (PLA)-Based Blends and Modification Strategies: Methods of Improving Key Properties towards Technical Applications-Review

The widespread use of poly(lactic acid) (PLA) from packaging to engineering applications seems to follow the current global trend. The development of high-performance PLA-based blends has led to the commercial introduction of various PLA-based resins with excellent thermomechanical properties. The reason for this is the progress in the field of major PLA limitations such as low thermal resistance and poor impact strength. The main purpose of using biobased polymers in polymer blends is to increase the share of renewable raw materials in the final product rather than its possible biodegradation. However, in the case of engineering applications, the focus is on achieving the required properties rather than maximizing the percentage of biopolymer. The presented review article discusses the current strategies to optimize the balance of the key features such as stiffness, toughness, and heat resistance of PLA-based blends. Improving of these properties requires molecular structural changes, which together with morphology, crystallinity, and the influence of the processing conditions are the main subjects of this article. The latest research in this field clearly indicates the high potential of using PLA-based materials in highly demanding applications. In the case of impact strength modification, it is possible to obtain values close to 800 J/m, which is a value comparable to polycarbonate. Significant improvement can also be confirmed for thermal resistance results, where heat deflection temperatures for selected types of PLA blends can reach even 130 °C after modification. The modification strategies discussed in this article confirm that a properly conducted process of selecting the blend components and the conditions of the processing technique allows for revealing the potential of PLA as an engineering plastic.

Magneto-Responsive Chiral Optical Materials: Flow-Induced Twisting of Cellulose Nanocrystals in Patterned Magnetic Fields

Magnetic fields have been used to uniformly align the lyotropic chiral nematic (cholesteric) liquid crystalline (LC) phase of biopolymers to a global orientation and optical appearance. Here, we demonstrate that, in contrast, weak and patterned magnetic field gradients can create a complex optical appearance with the variable spatial local organization of needle-like magnetically decorated cellulose nanocrystals. The formation of optically patterned thin films with left- and right-handed chiral and achiral regions is observed and related to local magnetic gradient-driven vortices during LC suspension flow. We trace the localized flow directions of the magnetically decorated nanocrystals during evaporation-induced assembly, demonstrating how competing evaporation and field-induced localized flow affect the twisted organization within magnetically induced vortices. The simulations suggested that localized twisting inversion originates from the interplay between the direction and strength of the local-depth-related magnetic gradients and the receding front through peripheral magnetic gaps. We propose that this finding will lead to magnetically patterned photonic films.

Thin Conducting Films: Preparation Methods, Optical and Electrical Properties, and Emerging Trends, Challenges, and Opportunities

Thin conducting films are distinct from bulk materials and have become prevalent over the past decades as they possess unique physical, electrical, optical, and mechanical characteristics. Comprehending these essential properties for developing novel materials with tailored features for various applications is very important. Research on these conductive thin films provides us insights into the fundamental principles, behavior at different dimensions, interface phenomena, etc. This study comprehensively analyzes the intricacies of numerous commonly used thin conducting films, covering from the fundamentals to their advanced preparation methods. Moreover, the article discusses the impact of different parameters on those thin conducting films' electronic and optical properties. Finally, the recent future trends along with challenges are also highlighted to address the direction the field is heading towards. It is imperative to review the study to gain insight into the future development and advancing materials science, thus extending innovation and addressing vital challenges in diverse technological domains.

Harnessing Nature-Inspired Catechol Amino Acid to Engineer Sticky Proteins and Bacteria

3,4-Dihydroxy-L-phenylalanine (DOPA) serves as a post-translational modification amino acid present in mussel foot proteins. Mussels exploit the exceptional adhesive properties of DOPA to adhere to a wide range of surfaces. This study presents the development of sticky proteins and bacteria through the site-specific incorporation of DOPA using Genetic Code Expansion Technology. Through the optimization of the DOPA incorporation system, proteins containing DOPA demonstrate significantly improved binding abilities to various organic and metallic materials. The material-binding capabilities of DOPA to combat different types of biofoulings are harnessed by integrating it into intrinsically disordered proteins. Beyond the creation of adhesive proteins for anti-biofouling purposes, this highly efficient DOPA incorporation system is also applied to engineer adhesive bacteria, resulting in a remarkable increase in their binding capability to diverse materials including 400 folds of improvement to polyethylene terephthalate (PET). This substantial enhancement in PET binding of these bacteria has allowed to develop a unique approach for PET degradation, showcasing the innovative application of Genetic Code Expansion in cell engineering.

Silk-enriched hydrogels with ROS-scavenging dendrimers for advanced wound care

This study explores the development of novel hydrogel composites for wound care, incorporating silk fibroin and reactive oxygen species (ROS)-scavenging dendrimers into a polyvinyl alcohol (PVA) matrix. Utilizing ionizing gamma radiation, we fabricated pristine PVA, silk-PVA (SPVA) binary, and dendrimer-silk-PVA (DSPVA) ternary hydrogel composites, with their composition confirmed via UV-visible absorption spectroscopy. Fourier-transform infrared (FTIR) and Raman spectroscopy analyses indicated complex interactions between the hydrogel components, enhancing their structural and biocompatible properties. Scanning electron microscopy (SEM) analysis revealed that dendrimer integration in DSPVA hydrogels significantly increased surface porosity, vital for tissue regeneration. The DSPVA hydrogels demonstrated effective ROS scavenging, reducing hydrogen peroxide (H2O2) concentrations by approximately 70 % within 24 h. In vivo wound healing studies in a diabetic mouse model showed enhanced wound closure in the DSPVA group, with a relative wound area reduction to 30 ± 4.3 % on day 10, compared to 56.5 ± 2.7 % in the control group. By the 16th day, the treated group exhibited near-complete wound contraction, markedly outperforming the control group. These findings underscore the potential of DSPVA hydrogels in diabetic wound management, combining silk fibroin's mechanical support, dendrimers' antioxidative properties, and PVA's structural benefits. Thus, DSPVA hydrogels are promising candidates for advanced wound care applications.

Gel-confined fabrication of fully bio-based filtration membrane for green capture and rapid detection of airborne microbes

Air filtration has become a desirable route for collecting airborne microbes. However, the potential biotoxicity and sterilization of current air filtration membranes often lead to undesired inactivation of captured microbes, which greatly limits microbial non-traumatic transfer and recovery. Herein, we report a gel-confined phase separation strategy to rationally fabricate a fully bio-based filtration membrane (SGFM) using soluble soybean polysaccharide and gelatin. The versatile SGFM features fascinating honeycomb micro-nano architecture and hierarchical interconnected porous structures for microbial capture, and achieves a lower pressure drop, higher interception efficiency (99.3%), and superior microbial survivability than commercial gelatin filtration membranes. Particularly, the water-dissolvable SGFM can greatly simplify the elution and extraction process after bioaerosol sampling, thereby bringing about maximum sample transfer and vigorous recovery of collected microbes. Meanwhile, green capture coupled with ATP bioluminescence endows the SGFM with rapid and quantitative detection capability for airborne microbes. This work may pave the way for designing green protocols for the detection of bioaerosols.

Leveraging the Physicochemical Attributes of Biomimetic Hydrogel Nanocomposites in Stem Cell Differentiation

The field of tissue engineering has witnessed significant advancements with the advent of hydrogel nanocomposites (HNC), emerging as a highly promising platform for regenerative medicine. HNCs provide a versatile platform that significantly enhances the differentiation of stem cells into specific cell lineages, making them highly suitable for tissue engineering applications. By incorporating nanoparticles, the mechanical properties of hydrogels, such as elasticity, porosity, and stiffness, are improved, addressing common challenges such as short-term stability, cytotoxicity, and scalability. These nanocomposites also exhibit enhanced biocompatibility and bioavailability, which are crucial to their effectiveness in clinical applications. Furthermore, HNCs are responsive to various triggers, allowing for precise control over their chemical properties, which is beneficial in creating 3D microenvironments, promoting wound healing, and enabling controlled drug delivery systems. This review provides a comprehensive overview of the production methods of HNCs and the factors influencing their physicochemical and biological properties, particularly in relation to stem cell differentiation and tissue repair. Additionally, it discusses the challenges in developing HNCs and highlights their potential to transform the field of regenerative medicine through improved mechanotransduction and controlled release systems.

Dual parameter smart sensor for nitrogen and temperature sensing based on defect-engineered 1T-MoS2

In general, defects are crucial in designing the different properties of two-dimensional materials. Therefore large variations in the electric and optical characteristics of two-dimensional layered molybdenum disulphide might be attributed to defects. This study presents the design of a temperature and nitrogen sensor based on few-layer molybdenum disulfide sheets (FLMS), which was developed from bulk MoS2 (BMS) through an exfoliation approach. The produced sulfur defect, molybdenum defect, line defect, and plane defect were characterized by scanning transmission electron microscopy (STEM), which substantially impacts the sensing characteristics of the resulting FLMS. Our theoretical analysis validates that the sulfur vacancies of the MoS2 lattice improve sensing performance by promoting effective charge transfer and surface interactions with target analytes. The FLMS-based sensor showed a high sensitivity for detecting nitrogen gas with a detection limit (LOD) of ~ 0.18 ppm. Additionally, temperature-detecting capabilities were assessed over various temperatures, showing outstanding stability and repeatability. To the best of our knowledge, this material is the first of its kind, demonstrating visible N2 gas sensing with chromic behaviour.

Combined Chemo- and Photothermal Therapies of Non-Small Cell Lung Cancer Using Polydopamine/Au Hollow Nanospheres Loaded with Doxorubicin

Purpose

The chemotherapeutic agent doxorubicin (DOX) is limited by its cardiotoxicity, posing challenges in its application for non-small cell lung cancer (NSCLC). This study aims to explore the efficacy of polydopamine/Au nanoparticles loaded with DOX for chemotherapy and photothermal therapy in NSCLC to achieve enhanced efficacy and reduced toxicity.

Methods

Hollow polydopamine (HPDA)/Au@DOX was synthesized via polydopamine chemical binding sacrificial template method. Morphology was characterized using transmission electron microscopy, particle size and potential were determined using dynamic light scattering, and photothermal conversion efficiency was assessed using near-infrared (NIR) thermal imaging. Drug loading rate and in vitro drug release were investigated. In vitro, anti-tumor experiments were conducted using CCK-8 assay, flow cytometry, and live/dead cell staining to evaluate the cytotoxicity of HPDA/Au@DOX on A549 cells. Uptake of HPDA/Au@DOX by A549 cells was detected using the intrinsic fluorescence of DOX. The in vivo anti-metastasis and anti-tumor effects of HPDA/Au@DOX were explored in mouse lung metastasis and subcutaneous tumor models, respectively.

Results

HPDA/Au@DOX with a particle size of (164.26±3.25) nm, a drug loading rate of 36.31%, and an encapsulation efficiency of 90.78% was successfully prepared. Under 808 nm laser irradiation, HPDA/Au@DOX accelerated DOX release and enhanced uptake by A549 cells. In vitro photothermal performance assessment showed excellent photothermal conversion capability and stability of HPDA/Au@DOX under NIR laser irradiation. Both in vitro and in vivo experiments demonstrated that the photothermal-chemotherapy combination group (HPDA/Au@DOX+NIR) exhibited stronger anti-metastatic and anti-tumor activities compared to the monotherapy group (DOX).

Conclusion

HPDA/Au@DOX nanosystem demonstrated excellent photothermal effect, inhibiting the growth and metastasis of A549 cells. This nanosystem achieves the combined effect of chemotherapy and photothermal, making it promising for NSCLC treatment.

Unveiling the Performance of Co-Assembled Hybrid Nanocarriers: Moving towards the Formation of a Multifunctional Lipid/Random Copolymer Nanoplatform

Despite the appealing properties of random copolymers, the use of these biomaterials in association with phospholipids is still limited, as several aspects of their performance have not been investigated. The aim of this work is the formulation of lipid/random copolymer platforms and the comprehensive study of their features by multiple advanced characterization techniques. Both biomaterials are amphiphilic, including two phospholipids (1,2-dioctadecanoyl-sn-glycero-3-phosphocholine (DSPC), 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC)) and a statistical copolymer of oligo (ethylene glycol) methyl ether methacrylate (OEGMA) and 2-(diisopropylamino) ethyl methacrylate (DIPAEMA). We examined the design parameters, including the lipid composition, the % comonomer ratio, and the lipid-to-polymer ratio that could be critical for their behavior. The structures were also probed in different conditions. To the best of the authors' knowledge, this is the first time that P(OEGMA-co-DIPAEMA)/lipid hybrid colloidal dispersions have been investigated from a membrane mechanics, biophysical, and morphological perspective. Among other parameters, the copolymer architecture and the hydrophilic to hydrophobic balance are deemed fundamental parameters for the biomaterial co-assembly, having an impact on the membrane's fluidity, morphology, and thermodynamics. Exploiting their unique characteristics, the most promising candidates were utilized for methotrexate (MTX) loading to explore their encapsulation capability and potential antitumor efficacy in vitro in various cell lines.

Maltodextrin-modified graphene oxide composite membrane applied to the enantioseparation of amino acids

The separation of enantiomers using chiral membranes has garnered much research interest. In this study, the enantioseparation of amino acids using chiral membranes, namely graphene oxide-ethylenediamine-maltodextrin (GO-EDA-MD) and GO-EDA-hydroxypropyl-MD (GO-EDA-HP-MD), was evaluated. HP-MD and MD were investigated as chiral selectors due to their inherent chirality. Various characterization techniques, including atomic force microscopy, Fourier transform infrared spectrometry, field emission scanning electron microscopy, water contact angle analysis, tensile properties, and thermal gravimetric analysis were employed to analyze the membrane structures. The evaluation of enantioseparation performance was conducted by employing tryptophan, phenylalanine, and tyrosine enantiomers. Optimal conditions for enantiomer separation were achived using a GO-EDA-HP-MD chiral composite (1.75 wt%), a feed concentration of 10 mg/L for each enantiomer, a separation time of 15 min, and a membrane effective surface area of 1.0 cm2. Also, the bovine serum albumin rejection was 90.0 %, and the water flux reached 37.1 L m-2 h-1. The highest enantiomeric excess (ee.%) values were 46.33 %, 76.97 %, and 73.04 % for tryptophan, phenylalanine, and tyrosine, respectively. The impact of voltage on ee.% and substance flux was also explored. This membrane was able to separate enantiomers successfully.