Isolation and characterization of halophilic bacteria with the ability of heavy metal bioremediation and nanoparticle synthesis from Khara salt lake in Iran

Increasing environmental pollutants such as heavy metals have become one of the most severe health dangers because of rapid industrialization. Exposure to lead and nickel heavy toxic metals can lead to hazardous diseases affecting most of the organs in humans. Bioremediation is a process that uses the ability of microorganisms or plants to detoxify environmental contaminants at lower costs than physicochemical techniques. This study isolated halophilic bacteria from Khara salt lake in Iran and screened their ability to resist lead and nickel. After screening stages, three selected strains including Bacillus sp. A21, Oceanobacillus sp. A22 and Salinicoccus A43 were identified by16S rDNA sequencing and the related sequences were submitted to GeneBank with accession IDs MN588312, MN588313, and MN 588,314, respectively. These strains resist 7.2 mM, 4.1 mM, and 6.7 mM lead and 3.6 mM, 3.7 mM, and 4.1 mM nickel, respectively. Investigation of growth pattern and evaluation of bioremediation ability by atomic absorption spectroscopy revealed that Bacillus sp. A21 could decrease lead and nickel in culture medium up to 97.5% and 76%, respectively. Oceanobacillus sp. A22 showed higher lead bioremediation rate (98.8%) and lower nickel-bioremediation rate (73.5%). Salinicoccus sp. A43 showed the least bioremediation ability (92% lead and 71.7% nickel). The ability of selected strains to synthesize lead and nickel nanoparticles was evaluated using UV/Vis spectrophotometry and Energy-Dispersive X-ray Spectroscopy (EDX). Particle dimensions were measured using Scanning Electron Microscopy (SEM). Bacillus sp. A21 and Oceanobacillus sp. A22 strains were able to synthesize lead nanoparticles; however, Salinicoccus sp. A43 could synthesize both lead and nickel nanoparticles.

Molecular characterization of leaf spot caused by Alternaria alternata on buttonwood (Conocarpus erectus L.) and determination of pathogenicity by a novel disease rating scale

The buttonwood (Conocarpus erectus L.) is a mangrove shrub belonging to Combretaceae family. It mostly grows on the shorelines of tropical and subtropical regions in the world. It was introduced to Lasbela University of Water, Agriculture & Marine Sciences (LUWMS), Uthal, Baluchistan as an ornamental plant as it grows well under harsh, temperate and saline conditions. During a routine survey, typical leaf spot symptoms were observed on the leaves of buttonwood plants. A disease severity scale for alternaria leaf spot of buttonwood was developed for the first time through this study. Disease severity according to the scale was 38.97%. The microscopic characterizations was accomplished for the identification of Alternaria alternata and Koch's postulates were employed to determine the pathogenicity. For molecular identification, 650 bp internal transcribed spacer (ITS) regions (ITS1, 5.8s and ITS2) were amplified from three representative isolates (LUAWMS1, LUAWMS2 and LUAWMS3) through polymerase chain reaction (PCR). The nucleotide sequences from ITS regions of the isolates were submitted to NCBI with GenBank accession numbers MW585375, MW585376 and MW585377, respectively. The phylogenetic tree of 22 A. alternata isolates was computed and representative isolates exhibited 99.98% genetic similarity with mangroves ecosystem isolates. This study reports the incidence of alternaria leaf spot of buttonwood at LUWMS for the first time. It is suspected that the disease may spread further. Therefore, effective management strategies should be opted to halt the further spread of the disease.

Scalp Hair Metal Analysis Concerning DNA Damage in Welders of Peshawar Khyber Pakhtunkhwa Pakistan

Welding is used throughout the world in refineries, thermal power plants, chemical facilities, and pressurized containers, and the welders are exposed to toxic heavy metals, electromagnetic fields, polycyclic aromatic hydrocarbon, and ultraviolet radiations. In the present study, 59 welders and an equal number of control subjects were assessed for DNA damage in the lymphocytes using the comet assay. Heavy metals such as lead (Pb), iron (Fe), nickel (Ni), chromium (Cr), manganese (Mn), and cadmium (Cd) levels in the scalp hair of the subjects were evaluated by using atomic absorption spectroscopy (AAS). The results of the current study showed that DNA damage in the lymphocytes of welders (121.8 ± 10.7) was significantly higher as compared with controls (56.5 ± 17.6) (P < 0.001). Besides, the levels of Pb, Fe, Ni, Cr, Mn, and Cd were remarkably higher in the scalp hair of workers as compared with the control group (P < 0.001). Regression analysis showed a prominent association between the heavy metals and total comet score (TCS) in the exposed subjects. Age and duration of occupational exposure had significant effects (P < 0.05) on TCS values. Our results concluded that occupational exposure to welding fumes may cause DNA damage and can lead to important health hazards in the workers.

Remediation of Metal/Metalloid-Polluted Soils: A Short Review

The contamination of soil by heavy metals and metalloids is a worldwide problem due to the accumulation of these compounds in the environment, endangering human health, plants, and animals. Heavy metals and metalloids are normally present in nature, but the rise of industrialization has led to concentrations higher than the admissible ones. They are non-biodegradable and toxic, even at very low concentrations. Residues accumulate in living beings and become dangerous every time they are assimilated and stored faster than they are metabolized. Thus, the potentially harmful effects are due to persistence in the environment, bioaccumulation in the organisms, and toxicity. The severity of the effect depends on the type of heavy metal or metalloid. Indeed, some heavy metals (e.g., Mn, Fe, Co, Ni) at very low concentrations are essential for living organisms, while others (e.g., Cd, Pb, and Hg) are nonessential and are toxic even in trace amounts. It is important to monitor the concentration of heavy metals and metalloids in the environment and adopt methods to remove them. For this purpose, various techniques have been developed over the years: physical remediation (e.g., washing, thermal desorption, solidification), chemical remediation (e.g., adsorption, catalysis, precipitation/solubilization, electrokinetic methods), biological remediation (e.g., biodegradation, phytoremediation, bioventing), and combined remediation (e.g., electrokinetic–microbial remediation; washing–microbial degradation). Some of these are well known and used on a large scale, while others are still at the research level. The main evaluation factors for the choice are contaminated site geology, contamination characteristics, cost, feasibility, and sustainability of the applied process, as well as the technology readiness level. This review aims to give a picture of the main techniques of heavy metal removal, also giving elements to assess their potential hazardousness due to their concentrations.

Lactococcus lactis ssp lactis a rare cause of liver abscesses: A case report and literature review

•

Lactococcus lactis is a rare cause of liver abscesses.

•

Lactococcus lactis ssp lactis can cause liver abcesses in immunocompetent people.

•

The exposition to unpasteurized dairy products may lead to liver abcess due to L. lactis ssp lactis.

•

Young and immunocompetent people can develop liver abscesses, even for bacteria considered as non-pathogenic.

•

Antibiotics and percutaneous drainage are the first line for treatment of liver abscesses and have improved the death rate.

Introduction

We present a liver abscess due to Lactococcus lactis ssp lactis.

Case presentation

It is a 27-year-old male patient without history who presented the right hypochondrium pain over 10 days. The physical examination noted right hypochondrium pain and hépatomegally. The ultrasound showed hepatomegaly with liver abcess for the segments IV and V as well as VII and VIII measuring 13 × 8 cm and 7.6 × 4.3 cm respectively. A computed tomography (CT) revealed an abscess for segments IV and V and VI and VII measuring respectively 107 × 89 mm and 55 × 50 mm. He underwent a surgical drainage after a radiologic drainage and antibiotherapy failure with success.

Discussion

Liver abscesses are rare; affect men over 60 years with co-morbidities and those due to L. Lactis ssp lactis are exceptional. Their prevalence is 0.29–1.47% in series of autopsies and 0.008 to 0.16% in hospitalized patients. The most frequently found germs are gram-negative bacilli (40–60%) and anaerobic bacteria (40–50%). Ultrasound and CT scan make the diagnosis in 90% of cases and orients to the etiology. Percutaneous drainage is the first line for treatment, surgical drainage is reserved for percutaneous drainage failures.

Conclusion

Liver abscess due to Lactococcus lactis ssp lactis is very rare. The clinic, diagnostic methods and treatment of this abscess are identical to other abscesses due to other etiologies. The antibiotics and percutaneous drainage of abscesses have improved the death rate from 40% to 10%–25%.

Knowledge, Attitudes and Practices Regarding Antibiotic Use and Resistance among Veterinary Students in Bangladesh

The use of antibiotics in animals for both therapeutic and non-therapeutic purposes is a major driver of the emergence and spread of antimicrobial resistance (AMR). While several studies have investigated prescription and consumption patterns in humans, little attention has been paid to the veterinary sector. A cross-sectional study was conducted in 3002 veterinary students (VS) and non-medical students (NMS) from 12 universities in Bangladesh to explore their knowledge, attitudes and practices (KAP) about antibiotics and AMR using a self-administered questionnaire, and assess the influence of the veterinary curriculum. KAP regarding antibiotic use and AMR was significantly higher in veterinary than non-medical students, and in first-year than final-year students. However, gaps in knowledge and practices were highlighted, suggesting deficiencies in training. Moreover, final-year veterinary students were found to be more likely than first-year students to use antibiotics without instructions, which could indicate deficiencies in their curriculum. Although the study suggested a positive impact of the veterinary curriculum on KAP about antibiotics and AMR in Bangladesh, critical gaps remain that are likely to contribute to inadequate use in their future practice. Therefore, there is scope for improving educational programs on AMR in professional curricula.

Mycoremediation of heavy metals: processes, mechanisms, and affecting factors

Industrial processes and mining of coal and metal ores are generating a number of threats by polluting natural water bodies. Contamination of heavy metals (HMs) in water and soil is the most serious problem caused by industrial and mining processes and other anthropogenic activities. The available literature suggests that existing conventional technologies are costly and generated hazardous waste that necessitates disposal. So, there is a need for cheap and green approaches for the treatment of such contaminated wastewater. Bioremediation is considered a sustainable way where fungi seem to be good bioremediation agents to treat HM-polluted wastewater. Fungi have high adsorption and accumulation capacity of HMs and can be potentially utilized. The most important biomechanisms which are involved in HM tolerance and removal by fungi are bioaccumulation, bioadsorption, biosynthesis, biomineralisation, bioreduction, bio-oxidation, extracellular precipitation, intracellular precipitation, surface sorption, etc. which vary from species to species. However, the time, pH, temperature, concentration of HMs, the dose of fungal biomass, and shaking rate are the most influencing factors that affect the bioremediation of HMs and vary with characteristics of the fungi and nature of the HMs. In this review, we have discussed the application of fungi, involved tolerance and removal strategies in fungi, and factors affecting the removal of HMs.

Effect of the direct use of biomass in agricultural soil on heavy metals __ activation or immobilization?

In recent years, the biomass was directly used extensively in agriculture due to its low cost and convenience. Increasingly serious soil pollution of heavy metals may pose threats and risks to human health. Directly addition of biomass to soil may affect the bioavailability and content of heavy metals. Here, we reviewed the impact of direct application of oil cake, manure, sewage sludge, straw and municipal waste to soil on the form and concentration of heavy metals in soil, and also emphasized the role of biomass in soil heavy metals remediation. Heavy metals can be activated in a short term by the content of heavy metals in biomass, the production of low-molecular-weight organic acids by biomass application, and the oxidation of sulfides (except for ammoniation). However, heavy metals in soil can be immobilized by humic substances. These can be produced by biomass during a long-term application to soil. Moreover, the degree of immobilization depended on the kind of biomass. Biomass contaminated by heavy metals cannot be returned to the field directly. Therefore, Mitigating the activation of heavy metals in the early stage of biomass application is meaningful, especially for application of these biomass such as straw, sewage sludge and municipal waste. Future researches should focus on the heavy metal control on direct use of biomass in agricultural.

Tracking gene expression, metabolic profiles, and biochemical analysis in the halotolerant basidiomycetous yeast Rhodotorula mucilaginosa EXF-1630 during benzo[a]pyrene and phenanthrene biodegradation under hypersaline conditions

Polyaromatic phenanthrene (Phe) and benzo[a]pyrene (BaP) are highly toxic, mutagenic, and carcinogenic contaminants widely dispersed in nature, including saline environments. Polyextremotolerant Rhodotorula mucilaginosa EXF-1630, isolated from Arctic sea ice, was grown on a huge concentration range -10 to 500 ppm- of Phe and BaP as sole carbon sources at hypersaline conditions (1 M NaCl). Selected polycyclic aromatic hydrocarbons (PAHs) supported growth as well as glucose, even at high PAH concentrations. Initially, up to 40% of Phe and BaP were adsorbed, followed by biodegradation, resulting in 80% removal in 10 days. While extracellular laccase, peroxidase, and un-specific peroxygenase activities were not detected, NADPH-cytochrome c reductase activity peaked at 4 days. The successful removal of PAHs and the absence of toxic metabolites were confirmed by toxicological tests on moss Physcomitrium patens, bacterium Aliivibrio fischeri, human erythrocytes, and pulmonary epithelial cells (A549). Metabolic profiles were determined at the midpoint of the biodegradation exponential phase, with added Phe and BaP (100 ppm) and 1 M NaCl. Different hydroxylated products were found in the culture medium, while the conjugative metabolite 1-phenanthryl-β-D-glucopyranose was detected in the medium and in the cells. Transcriptome analysis resulted in 870 upregulated and 2,288 downregulated transcripts on PAHs, in comparison to glucose. Genomic mining of 61 available yeast genomes showed a widespread distribution of 31 xenobiotic degradation pathways in different yeast lineages. Two distributions with similar metabolic capacities included black yeasts and mainly members of the Sporidiobolaceae family (including EXF-1630), respectively. This is the first work describing a metabolic profile and transcriptomic analysis of PAH degradation by yeast.

Trichoderma viride involvement in the sorption of Pb(II) on muscovite, biotite and phlogopite: Batch and spectroscopic studies

In this study, batch and spectroscopic approaches were used to explore the sorption of Pb(II) on micas (i.e., muscovite, biotite and phlogopite) in the presence of Trichoderma viride (T. viride). Batch sorption showed that ion exchange, outer-sphere complexes (OSCs) and inner-sphere complexes (ISCs) contributed to Pb(II) sorption on biotite and phlogopite in the pH range of 2.0-7.4, whereas the ISCs were predominant for Pb(II) sorption on muscovite. X-ray diffraction and Fourier transform infrared (FT-IR) analyses have confirmed the changes of structure and surface properties of micas after co-culturing with T. viride, which could improve the sorption capacity of micas to Pb(II). Scanning electron microscopy revealed the bio-mineralization of Pb(II) on T. viride and mica-T. viride composites forming lead phosphates. Furthermore, FT-IR analysis showed that the groups of Si-OH, Al-OH from micas, and carboxyl, phosphate and amino groups from T. viride were synergistically contributing to Pb(II) sorption on mica-T. viride composite. X-ray photoelectron spectroscopy further confirmed that both OSCs and ISCs formed for Pb(II) sorption on micas; however, in the case of mica-T. viride composites, the synergistic effects of T. viride and micas were contributing to Pb(II) sorption through forming the ISCs and biomineralization.

Efficient enzymatic saccharification of alkaline and ionic liquid-pretreated bamboo by highly active extremozymes produced by the co-culture of two halophilic fungi

Herein, we studied two strains of halophilic fungi (Aspergillus flavus and Aspergillus penicillioides) as potential potent sources of hydrolases under solid-state fermentation conditions. We found that the co-culture of these two fungal species was associated with maximal CMCase, FPase, xylanase, and β-xylosidase activity under optimized fermentation conditions. These enzymes functioned optimally at pH values from 9.0 to 10.0, at temperatures from 50 °C to 60 °C, and in the presence of 15-20% NaCl. These enzymes were also stable in metal salt solutions and the presence of ionic liquids. Reducing sugar yields following the cellulase-hemicellulase co-treatment of untreated, alkaline-pretreated, and ionic liquid-pretreated bamboo were higher than those associated with separate cellulase and hemicellulase treatments, thus confirming the synergistic activity of cellulase-hemicellulase co-treatment in the context of bamboo saccharification. These results indicate that these two fungi are promising hydrolase producers that can facilitate the bioconversion of bamboo biomass.

Bacterial resistance to antibiotics: access, excess, and awareness in Bangladesh

Introduction: Antibiotic resistance is a substantial cause of mortality, morbidity burden in Bangladesh. In this perspective piece, the problem of antibiotic resistance has been analyzed by critically evaluating literature data, and based on the author's experience.Areas covered: The underlying causes of this resistance are numerous including irrational and inappropriate use of antibiotics aggravated by aggressive marketing, over-the-counter dispensing, prescribing by the unqualified providers, lack of awareness in the general population, and inadequate implementation of relevant regulations.Expert opinion: Although Bangladesh is making some progress toward containing antibiotic resistance, the pace of this progress is insufficient. Public awareness is crucial for the full implementation of the regulations. Given that it is more a social than a medical problem, the health sector is unable to tackle the problem on its own. An integrated approach is required that identifies the roles and relative importance of each sector (human, animal, and environment). A set of recommendations has been provided for the government to act.

Potentiality of living Bacillus pumilus SWU7-1 in biosorption of strontium radionuclide

Bacillus pumilus SWU7-1 was isolated from strontium ion (Sr(II))-uncontaminated soil, its biosorption potential was evaluated, and the effect of γ-ray radiation treatment on its biosorption was discussed. Domesticated under Sr(II) stress promoted the biosorption ability of B. pumilus to Sr(II), and the biosorption efficiency increased from 46.09% to 94.69%. At a lower initial concentration, the living bacteria had the ability to resist the biosorption of Sr(II). The optimal initial concentration range was 54-130 mg/L. The biosorption profile was better matched by Langmuir than Freundlich model, showing that the biosorption process of Sr(II) by the experimental strain was closer to the surface adsorption. According to Langmuir model, the maximum biosorption capacity of B. pumilus on Sr (II) was 299.4 mg/g. During the bacterial growth in the biosorption process, the changes in biosorption capacity and efficiency can be divided into two phases, and a pseudo-second-order model is followed in each phase. There was no significant difference in the biosorption efficiency of bacteria with different culture time after γ-ray radiation, and all of them were above 90%, which showed that B. pumilus had significant radiation resistance under experimental conditions. This study emphasized the potential application of B. pumilus in the treatment of radioactive Sr(II) pollution by biosorption.

Bioactive compounds guided diversity of endophytic fungi from Baliospermum montanum and their potential extracellular enzymes

Baliospermum montanum (Willd.) Muell. Arg, a medicinal plant distributed throughout India from Kashmir to peninsular-Indian region is extensively used to treat jaundice, asthma, and constipation. In the current study, 203 endophytic fungi representing twenty-nine species were isolated from tissues of B. montanum. The colonization and isolation rate of endophytes were higher in stem followed by seed, root, leaf and flower. The phytochemical analysis revealed 70% endophytic isolates showed alkaloids and flavonoids, 13% were positive for phenols, saponins and terpenoids. Further, these endophytes produced remarkable extracellular enzymes such as amylase, cellulase, phosphates, protease and lipase. The most promisive three endophytic fungi were identified by ITS region and secreted metabolites were identified by gas chromatography-mass spectrometry (GC-MS/MS). The GC-MS profile detected twenty-five bioactive compounds from ethyl acetate extracts. Among endophytic fungi, Trichoderma reesei isolated from flower exhibited nine bioactive compounds namely, 2-Cyclopentenone, 2-(4-chloroanilino)-4-piperidino, Oxime-methoxy-Phenyl, Methanamine N-hydroxy-N-methyl, Strychane, Cyclotetrasiloxane, Octamethyl and 1-Acetyl-20a-hydroxy-16-methylene. The endophyte, Aspergillus brasiliensis isolated from root and Fusarium oxysporum isolated from seed produced nine and seven bioactive compounds, respectively. Overall, a significant contribution of bioactive compounds was noticed from the diverse endophytic fungi associated with B. montanum and could be explored for development of novel drug with commercial values.

Optimization of Growth Conditions of Acinetobacter sp. Cr1 for Removal of Heavy Metal Cr Using Central Composite Design

Growth conditions can significantly affect the removal efficiency of heavy metals by microorganisms. The goal of this study was enhancing the removal efficiency of Cr(VI) and improving the application of Acinetobacter sp. Cr1 (GenBank accession number of 16S rDNA sequence, MN900681). This study focused on pH, Cr(VI) concentration and culture time, which were the major influence factors for removal efficiency of Cr(VI). A central composite design was employed to optimize the removal efficiency by optimizing three variables. The optimum growth conditions were as: pH of 9.52, Cr(VI) concentration of 128.55 mg l^-1, culture time of 43.30 h, and the predicted and actual maxima were 65.13% and 67.26%, respectively. Therefore, it is suggested that the strain Acinetobacter sp. Cr1 had a promising potential to be used for bioremediation of Cr(VI).

Usage of microbial combination degradation technology for the remediation of uranium contaminated ryegrass

Post phytoremediation accumulation of heavy metals in plants is causing an environmental issue worldwide. In this study, we investigated the ability of eight different kinds of microorganisms to degrade and release heavy metals from heavy metal enriched ryegrass, including 5 species of bacteria (Bacillus subtilis, Bacillus licheniformis, Bacillus pumilus-I, Bacillus pumilus-II and Bacillus cereus) and 3 of fungi (Phanerochaete chrysosporium, Trichoderma ressei and Pterula sp. strain QD-1), by growing them under uranium stress and assessing their ability to degrade biomass. After 30 days, the degradation ability of fungi was found better than that of bacteria, while the metal leaching ability of bacteria was found better. The highest degradation rate (upto 60%) was obtained by using P. chrysosporium, Pterula sp. strain QD-1 exhibited the best leaching rate for uranium (upto 77%). The overall degradation rate of lignin and cellulose and hemicellulose was found lower (40% and 60%, respectively). According to the antagonistic characteristics of microbes, we combined different dominant species, in which under optimal conditions the T2 combination (P. chrysosporium, T. reesei, and Pterula sp. strain QD-1 and B. subtilis) was able to degrade 80% of the ryegrass, 51% of lignin, 74% of cellulose and hemicellulose, releasing 78% of U, 90% of Pb and the releasing rate of other heavy metals was more than 95%. FTIR analysis showed the least degradation of lignin, while SEM-EDX analysis of the degradation residues displayed the microstructure of ryegrass being greatly damaged. Only a small amount of U was found in the residues of the researched combinations. This study provides efficient Microbial Combined Degradation Technology for heavy metal enriched biomass, which can effectively deal with heavy metal enriched plants, and provide a basis for the recovery and utilization of heavy metals, avoiding secondary pollution in the environment caused by this type of biomass.

Pharmaceutical disposal facilitates the mobilization of resistance determinants among microbiota of polluted environment

The emergence of resistance on exposure to pharmaceuticals among microorganisms has raised serious concern in the therapeutic approach against infectious diseases. Effluents discharge from hospitals, industries, and urban settlements containing pharmaceuticals and other toxic compounds into the aquatic ecosystem selects bacterial population against them; thereby promotes acquisition and dissemination of resistant traits among the inhabitant microbiota. The present study was aimed to determine the prevalence and multidrug resistance pattern of Extended Spectrum β-lactamase (ESBL) producing and non-producing bacterial isolates from the heavily polluted Delhi stretch of river Yamuna, India. Additionally, the role of abiotic factors in the dissemination of conjugative plasmids harbouring resistance genes was also studied using E. coli J53 as recipient and resistant E. coli isolates as donor strains. Of the 227 non-duplicate bacterial isolates, 60% (136) were identified as ESBL⁺ and 40% (91) as ESBL. ESBL⁺ isolates were found highly resistant to β-lactam and non-β-lactam classes of antibiotics compared with the ESBL^- isolates. 68% of ESBL⁺ and 24% of ESBL^- isolates showed an MAR index of ≥0.5. Surprisingly, multidrug resistance (MDR), extensively drug resistance (XDR), and pandrug resistance (PDR) phenotype were observed for 78.6%, 16.9%, and 0.7% of ESBL⁺ and 90%, 3%, and none for PDR among ESBL^- isolates. Conjugation under different conditions showed a higher mobilization rate at neutral pH (7-7.5) for ESBL⁺ isolates. Conjugation frequency was maximum at 40 °C for the isolate E. coli MRB6 (4.1 × 10^-5) and E. coli MRE32 (4.89 × 10^-4) and at 35 °C for E. coli MRA11 (4.89 × 10^-5). The transconjugants obtained were found tolerating different concentrations of mercuric chloride (0.0002-0.2 mg/L). Increased biofilm formation for ESBL⁺ isolates was observed on supplementing media with HgCl₂ (2 μg/mL) either singly or in combination with CTX (10 μg/mL). The present study demonstrates that anthropogenically influenced aquatic environments act as a reservoir of MDR, XDR, and even PDR strains; thereby posing a potent public health risk.

Biomonitoring of Mercury, Cadmium and Selenium in Fish and the Population of Puerto Nariño, at the Southern Corner of the Colombian Amazon

Heavy metals threaten communities near biodiversity hotspots, as their protein sources come from the environment. This study assessed Hg, Cd, and Se concentrations in fish, as well as the magnitude of exposure and hematological conditions of adult citizens from Puerto Nariño (Colombian Amazon). Among fish samples, greater Hg concentrations were found in higher trophic level species, including Rhaphiodon vulpinus (880 ± 130 ng/g) and Pseudoplatystoma tigrinum (920 ± 87 ng/g). These species presented the highest hazard quotients and lowest Se:Hg molar ratios among those studied, showing their consumption represents a health risk to consumers. Moreover, some samples of Mylossoma duriventre and Prochilodus magdalenae had Cd levels greater than the regulated limit (100 ng/g). The average total Hg (T-Hg) concentrations in human hair and blood were 5.31 µg/g and 13.7 µg/L, respectively. All hair samples exceeded the 1.0 μg/g threshold set by the USEPA, whereas 93% of the volunteers had T-Hg blood levels greater than 5 μg/L, suggesting elevated exposure. The mean Cd level was 3.1 µg/L, with 21% of samples surpassing 5 µg/L, value at which mitigating actions should be taken. Eighty-four percent of participants presented Se deficiencies (<100 μg/L). There was a significant association between fish consumption and T-Hg in hair (ρ = 0.323; p = 0.032) and blood (ρ = 0.381; p = 0.011). In this last matrix, Se correlated with Cd content, whereas lymphocytes were inversely linked to Hg concentrations. The results of this study show that there is  extensive exposure to Hg in fish, the consumption of which may promote detrimental impacts on hematology parameters within the community.

<i>Pseudomonas stutzeri </i> CM1, Novel Thermotolerant Cellulase- Producing Bacteria Isolated from Forest Soil

BACKGROUND AND OBJECTIVE

Cellulase is an important enzyme that useful for agricultural residue hydrolysis such as plant stover, molasse, rice straw. Thermotolerant cellulases are required to apply in textile, food, detergent, biofuels and pharmaceutical applications. This research aimed to isolate the thermotolerant cellulase-producing bacteria from forest soil and to determine cellulase activity from isolated bacteria.

MATERIALS AND METHODS

Soil samples were collected from the Roi Et Rajabhat University forest. One gram of soil sample was mixed with Luria-Bertani (LB) broth medium and incubated at 37°C with shaking at 150 rpm for 24 h. The cultured broth was streaked on LB agar plate and incubated at 37°C for 24 h. Cellulase-producing bacteria were isolated using Carboxymethylcellulose (CMC) agar plate. Four bacterial isolates which presented a clear zone on CMC agar plate after flooded with iodine solution, named CM1, CM2, CM3 and CM4. Cellulase activity of 4 isolated bacteria was determined against various pH (pH 4-8) and temperature (50-100°C).

RESULTS

The results indicated that CM1 isolate showed the highest cellulase activity at 0.074 unit mL-1 at 80°C and pH5. All isolates were identified using 16S rRNA gene sequencing. The results indicated that CM1, CM3 and CM4 were identified as Pseudomonas stutzeri. while isolate CM2 was Bacillus subtilis.

CONCLUSION

This is the first report presenting the thermotolerant cellulase produced by Pseudomonas stutzeri. The thermotolerant cellulase produced from Pseudomonas stutzeri in this study will be useful in many industrial processes using cellulase at high temperatures.

In Vitro Bioadsorption of Cd2+ Ions: Adsorption Isotherms, Mechanism, and an Insight to Mycoremediation

The objective of this paper is to establish the significance of the mycoremediation of contaminants such as Cd2+ to achieve sustainable and eco-friendly remediation methods. Industries such as electroplating, paint, leather tanning, etc. release an enormous amount of Cd2+ in wastewater, which can drastically affect our flora and fauna. Herein, we report on the in vitro bioadsorption of Cd2+ ions using fungal isolates obtained from different contaminated industrial sites. The detailed studies revealed that two fungal species, i.e., Trichoderma fasciculatum and Trichoderma longibrachiatum, were found to be most effective against the removal of Cd2+ when screened for Cd2+ tolerance on potato dextrose agar (PDA) in different concentrations. Detailed adsorption studies were conducted by exploring various experimental factors such as incubation time, temperature, pH, inoculum size, and Cd2+ salt concentrations. Based on optimum experimental conditions, T. fasciculatum exhibited approximately 67.10% removal, while T. longibrachiatum shows 76.25% removal of Cd2+ ions at pH 5.0, 120 h incubation time, at 30°C. The inoculum sizes for T. fasciculatum and T. longibrachiatum were 2.5% and 2.0%, respectively. Finally, the morphological changes due to Cd2+ accumulation were examined using scanning electron microscopy (SEM). Further, Fourier transform infrared spectroscopy (FTIR) spectroscopy reveals the presence of various functional groups (-CH, –C=O, NH and –OH), which seem to be responsible for the efficient binding of Cd2+ ions over the fungal surfaces.

Lignocellulose hydrolytic enzymes production by Aspergillus flavus KUB2 using submerged fermentation of sugarcane bagasse waste

Lignocellulosic wastes, rice straw, sugarcane bagasse, rice bran and sawdust, and pure commercial carboxymethyl cellulose (CMC) and xylan were used as substrates to cultivate cellulolytic fungus, Aspergillus flavus KUB2, in submerged fermentation at 30°C. Of all the substrates, sugarcane bagasse was a good source for the production of cellulolytic and also hemicellulolytic enzymes. The maximum activities of endoglucanase (CMCase), total cellulase (FPase) and xylanase using sugarcane bagasse as substrate were 8%, 75% and 165%, respectively, higher than those of the commercial substrates. The time course determination of enzyme production revealed that the highest CMCase (1.27 U/ml), FPase (0.72 U/ml) and xylanase (376.81 U/ml) activities were observed at 14 days of fermentation. Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM) analyses confirmed the efficient structural alteration of sugarcane bagasse caused by enzymatic actions during A. flavus KUB2 cultivation. Based on the results of the hydrolytic enzyme activities, FTIR and SEM, A. flavus KUB2 is suggested as an efficient hydrolytic enzymes producer and an effective lignocellulose degrader, while sugarcane bagasse can be applied as a low-cost carbon source for the economical production of lignocellulose hydrolytic enzymes by A. flavus KUB2.

Adaptation of soil fungi to heavy metal contamination in paddy fields-a case study in eastern China

Soil fungi have been widely studied, but the effects of heavy metal contamination at various levels as well as the abundance and diversity of heavy metal tolerant fungi in the contaminated paddy soils are still unknown. The purpose of this study is to analyze the adaptability of fungi at different levels of heavy metal contamination to identify species that have strong adaptability to heavy metals. In this research, the technology of high-throughput sequencing was applied to study fungal communities in severe level (SL), moderate level (ML), light level (LL), and clean level (CL) for soil samples polluted by heavy metal, as well as to analyze the relations between environmental variables and fungal communities. The spearman analysis showed that 6 dominant fungal phyla and 18 dominant fungal genera were significantly correlated with these environmental variables. The α-diversity indexes of the soil fungal community from SL, ML, and CL were, mostly, drastically higher than the LL samples (p < 0.05). Meanwhile, Ascomycota, the main fungal phylum, was spotted to yield a strong tolerance towards heavy metals, especially in ML. The most dominant genera of tolerant fungi in this area, which are Aspergillus, Penicillium, and Fusarium, could absorb and transport the heavy metals with the help of nutrients under certain heavy metal contamination levels. Therefore, this study indicated that some fungi, which have strong biodegradability on heavy metals, can reduce toxicity of heavy metals and create a proper soil environment to grow food crops. Graphical abstract.

Removal mechanism of Pb(II) by Penicillium polonicum: immobilization, adsorption, and bioaccumulation

Currently, lead (Pb) has become a severe environmental pollutant and fungi hold a promising potential for the remediation of Pb-containing wastewater. The present study showed that Penicillium polonicum was able to tolerate 4 mmol/L Pb(II), and remove 90.3% of them in 12 days through three mechanisms: extracellular immobilization, cell wall adsorption, and intracellular bioaccumulation. In this paper. the three mechanisms were studied by Raman, X-ray diffraction analysis (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and transmission electron microscopy (TEM). The results indicated that Pb(II) was immobilized as lead oxalate outside the fungal cell, bound with phosphate, nitro, halide, hydroxyl, amino, and carboxyl groups on the cell wall, precipitated as pyromorphite [Pb₅(PO₄)₃Cl] on the cell wall, and reduced to Pb(0) inside the cell. These combined results provide a basis for additionally understanding the mechanisms of Pb(II) removal by P. polonicum and developing remediation strategies using this fungus for lead-polluted water.

Bioremediation of water contaminated with uranium using Penicillium piscarium

Penicillium piscarium can be indicated as promising in the treatment of sites contaminated with uranium. Thus, this research aimed to analyze the P. piscarium dead biomass in uranium biosorption. This fungus was previously isolated from a highly contaminated uranium mine located in Brazil. Biosorption tests were carried out at pH 3.5 and 5.5 in solutions contaminated with concentrations of 1 to 100 mg/L of uranium nitrate. Our results showed that the dead biomass of P. piscarium was able to remove between 93.2 and 97.5% uranium from solutions at pH 3.5, at the end of the experiment, the pH of the solution increased to values above 5.6. Regarding the experiments carried out in solutions with pH 5.5, the dead biomass of the fungus was also able to remove between 38 and 92% uranium from the solution, at the end of the experiment, the pH of the solution increased to levels above 6.5. The analysis of electron microscopy, Energy-dispersive spectroscopy, and X-ray fluorescence demonstrated the high concentration of uranium precipitated on the surface of the fungal biomass. These results were impressive and demonstrate that the dead biomass of P. piscarium can be an important alternative to conventional processes for treating water contaminated with heavy metals, and we hope that these ecofriendly, inexpensive, and effective technologies be encouraged for the safe discharge of water from industrial activities.

Increased Cd2+ biosorption capability of Aspergillus nidulans elicited by crpA deletion

The P-type ATPase CrpA is an important Cu²⁺ /Cd²⁺ pump in the Aspergilli, significantly contributing to the heavy metal stress tolerance of these ascomycetous fungi. As expected, the deletion of crpA resulted in Cu²⁺ /Cd²⁺ -sensitive phenotypes in Aspergillus nidulans on stress agar plates inoculated with conidia. Nevertheless, paradoxical growth stimulations were observed with the ΔcrpA strain in both standard Cu²⁺ stress agar plate experiments and cellophane colony harvest (CCH) cultures, when exposed to Cd²⁺ . These observations reflect efficient compensatory mechanisms for the loss of CrpA operating under these experimental conditions. It is remarkable that the ΔcrpA strain showed a 2.7 times higher Cd biosorption capacity in CCH cultures, which may facilitate the development of new, fungal biomass-based bioremediation technologies to extract harmful Cd²⁺ ions from the environment. The nullification of crpA also significantly changed the spatial distribution of Cu and Cd in CCH cultures, as demonstrated by the combined particle-induced X-ray emission and scanning transmission ion microscopy technique. Most important, the centers of gravity for Cu and Cd accumulations of the ΔcrpA colonies shifted toward the older regions as compared with wild-type surface cultures.

Tolerance and mycoremediation of silver ions by Fusarium solani

Silver ions discharged from various industries, are potentially toxic to living organisms at low concentrations, thus, there is an increasing need for development of an eco-friendly and cost-effective approach for its bioremediation. Filamentous fungi especially, Fusarium solani displayed a strong resistance to copper and cadmium ions as revealed from our previous study (El-Sayed 2014), however, the mechanisms of silver resistance by this fungus has not been resolved yet. Thus, this study was an extension to our previous work, to elucidate the mechanism of silver ions resistance and biotransformation by F. solani. The growth, bioaccumulation, thiol, total antioxidant, malondialdehyde (MDA), hydrogen peroxide (H₂O₂) contents and polyphenol oxidase (PPO) and catalase (CAT) activities of F. solani in response to silver ions were determined. Production and bioaccumulation of silver nanoparticles was characterized by UV-visible spectroscopy, TEM, and X-ray powder diffraction (XRD). The ultrastructural changes of F. solani induced by Ag(I) was examined by TEM and SEM. Production of oxalic acid by F. solani was increased by about 343.8% in response to 400 mg/l Ag(I), compared to control cultures (without silver ions) as revealed from HPLC analysis. The maximum biosorption levels by the native and alkali-treated biomass were carried out at pH 5.0, initial metal concentration 200 mg/l, biomass 0.5 g/l, temperature 35 °C, and contact time 1 h (native biomass) and 3 h (alkali-treated biomass). Fourier transform infrared spectroscopy (FTIR) results revealed that the main functional groups involved on this mycoremediation were C–S stretching, C=O C=N, C – H bending, C–N stretching and N–H bending. EDX spectra indicated the involvement of fungal cellular sulfur and phosphorus compounds in Ag(I) binding.

Enhanced removal of trichlorfon and Cd(II) from aqueous solution by magnetically separable chitosan beads immobilized Aspergillus sydowii

Simultaneous removal of heavy metals and organics from wastewater has always been an environmental problem with great concern. In this study, a novel ecofriendly bioborbent, magnetic chitosan beads immobilized Aspergillus sydowii (MCBAs) were synthesized and used to simultaneously remove trichlorfon (TCF) and Cd(II) from aqueous solution. MCBAs showed an increased special surface area (55.38 m²·g^-1) through immobilizing A. sydowii and its saturation magnetization reached 14.62 emu·g^-1. The equilibrium removal capacities of TCF and Cd(II) were 135.43 mg·g^-1 and 56.40 mg·g^-1 in the co-system with 200 mg·L^-1 TCF and 50 mg·L^-1 Cd(II), respectively. The removal capacities of TCF and Cd(II) were strongly depended on the immobilized A. sydowii spore concentration, initial concentrations of TCF and Cd(II), and MCBAs dose. TCF biodegradation intermediates were identified by gas chromatography-mass spectrometry system. Fourier transform infrared spectra displayed that -OH and -NH groups on MCBAs mainly participated in the Cd(II) sequestration and the CO stretching vibration was possibly related to the degradation intermediates of TCF. MCBAs exhibited excellent recyclability upto four cycles. Therefore, MCBAs are suitable and effective for the simultaneous removal of TCF and Cd(II) from wastewater.

Metal and organic pollutants bioremediation by extremophile microorganisms

Extremophiles comprise microorganisms that are able to grow and thrive in extreme environments, including in an acidic or alkaline pH, high or low temperatures, high concentrations of pollutants, and salts, among others. These organisms are promising for environmental biotechnology due to their unique physiological and enzymatic characteristics, which allow them to survive in harsh environments. Due to the stability and persistence of these microorganisms under adverse environmental conditions, they can be used for the bioremediation of environments contaminated with extremely recalcitrant pollutants. Here, we provide an overview of extremophiles and the role of "omics" in the field of bioremediation of environmental pollutants, including hydrocarbons, textile dyes and metals.

Bioremediation Options for Heavy Metal Pollution

BACKGROUND

Rapid industrialization and anthropogenic activities such as the unmanaged use of agro-chemicals, fossil fuel burning and dumping of sewage sludge have caused soils and waterways to be severely contaminated with heavy metals. Heavy metals are non-biodegradable and persist in the environment. Hence, remediation is required to avoid heavy metal leaching or mobilization into environmental segments and to facilitate their extraction.

OBJECTIVES

The present work briefly outlines the environmental occurrence of heavy metals and strategies for using microorganisms for bioremediation processes as reported in the scientific literature.

METHODS

Databases were searched from different libraries, including Google Scholar, Medline and Scopus. Observations across studies were then compared with the standards for discharge of environmental pollutants.

DISCUSSION

Bioremediation employs microorganisms for removing heavy metals. Microorganisms have adopted different mechanisms for bioremediation. These mechanisms are unique in their specific requirements, advantages, and disadvantages, the success of which depends chiefly upon the kind of organisms and the contaminants involved in the process.

CONCLUSIONS

Heavy metal pollution creates environmental stress for human beings, plants, animals and other organisms. A complete understanding of the process and various alternatives for remediation at different steps is needed to ensure effective and economic processes.

COMPETING INTERESTS

The authors declare no competing financial interests.

Speciation Distribution of Heavy Metals in Uranium Mining Impacted Soils and Impact on Bacterial Community Revealed by High-Throughput Sequencing

This study investigated the influence of heavy metals on bacterial community structure in a uranium mine. Soils from three differently polluted ditches (Yangchang ditch, Zhongchang ditch, and Sulimutang ditche) were collected from Zoige County, Sichuan province, China. Soil physicochemical properties and heavy metal concentrations were measured. Differences between bacterial communities were investigated using the high-throughput sequencing of the 16S rRNA genes. The obtained results demonstrated that bacterial richness index (Chao and Ace) were similar among three ditches, while the highest bacterial diversity index was detected in the severely contaminated soils. The compositions of bacterial communities varied among three examined sites, but Proteobacteria and Acidobacteria were abundant in all samples. Redundancy analysis revealed that soil organic matter, Cr and pH were the three major factors altering the bacterial community structure. Pearson correlation analysis indicated that the most significant correlations were observed between the contents of non-residual Cr and the abundances of bacterial genera, including Thiobacillus, Nitrospira, and other 10 genera. Among them, the abundances of Sphingomonas and Pseudomonas were significant and positively correlated with the concentrations of non-residual U and As. The results highlighted the factors influencing the bacterial community in uranium mines and contributed a better understanding of the effects of heavy metals on bacterial community structure by considering the fraction of heavy metals.

Enhanced adsorption of Zn2+ by salinity-aided aerobic granular sludge: Performance and binding mechanism

Aerobic granular sludge (AGS), which is formed by closely associating microorganisms through the production of extracellular polymeric substances (EPS), has proved to be an excellent and promising biosorbent. The reutilization of excess AGS as a kind of biosorbent would be an environmental-friendly means for heavy metal removal and reutilization of excess AGS. In this study, short-term exposure experiments were conducted to determine whether salinity (NaCl concentration ranged from 0 to 50 g/L) caused positive effects on Zn²⁺ adsorption performance by AGS. The results showed that the AGS formed in response to a 30 g/L saline treatment exhibited the best adsorption performance. Compared with the control (salinity of 0 g/L), the adsorptive capacity at equilibrium increased by 19.90% and reached 29.76 mg/g. The calculated maximum adsorption capacity in 30 g/L saline treatment group was 73.94 mg/g which was higher than described in previous studies using biochar, clarified sludge and aerobic granules. Analysis of EPS components suggested the enhanced adsorption of AGS might be ascribed to increasing polysaccharides content in the EPS after saline treatments. Additionally, Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) results indicated hydroxyl groups of EPS played an important role in Zn²⁺ binding. These findings provide further insight into the application of AGS for heavy metal adsorption.

Effects of micro-/nano-hydroxyapatite and phytoremediation on fungal community structure in copper contaminated soil

Micro-/nano-hydroxyapatite (MHA/NHA) has been used to reduce the concentration of available heavy metals and increase soil pH in the remediation of heavy metal-contaminated soils. However, little is known about the effects of MHA and NHA on soil fungal communities and function. In this study, fungal community composition was characterized from copper-contaminated soils amended with MHA, NHA and three other classic amendments combined with Elsholtzia splendens during a 3-year immobilization experiment. High-throughput sequencing results showed that applications of MHA increased the richness and diversity of the fungal community, which was opposite the results of NHA. SIMPER analysis indicated that both the relative abundance of fungi associated with biosorption and plant growth promotion increased, whereas the relative abundance of fungi related to bioleaching and potential pathogens decreased after applying MHA. Redundancy (RDA) analysis revealed that the soil pH was a crucial environmental factor in the succession of fungal communities. In addition, the results of functional prediction via FUNGuild suggested that the application of MHA had the potential to reduce the risk of pathogens infecting animals and plants in the soil but that NHA had some environmental risks. Overall, fungal community showed a synergistic effect of immobilization with the test amendments, and MHA was better for the remediation of heavy metal-contaminated soils than the other test amendments.

Removal and tolerance mechanism of Pb by a filamentous fungus: A case study

Currently, Pb pollution has become a severe environmental problem and filamentous fungi hold a promising potential for the treatment of Pb-containing wastewater. The present study showed that the strain Pleurotus ostreatus ISS-1 had a strong ability to tolerate Pb at high concentration and reached a removal rate of 53.7% in liquid media. Pb was removed by extracellular biosorption, intracellular bioaccumulation by mycelia, or precipitation with extracellular oxalic acids. On the cellular level, Pb was mainly distributed in the cell wall, followed by vacuoles and organelles. Fourier transform infrared spectroscopy (FTIR) analysis indicated that hydroxyl, amides, carboxyl, and sulfhydryl groups provided binding sites for Pb. Furthermore, Pb was found on the cell surface in the form of PbS and PbCO₃ through X-ray diffraction (XRD). Intracellular chelates such as thiol compounds and oxalic acid, as well as extracellular oxalic acid, might play an important role in the tolerance of Pb. In addition, isobaric tags for relative and absolute quantitation (iTRAQ) analysis showed that ATP-binding cassette (ABC) transporter, cytochrome P450, peroxisome, and the calcium signaling pathway might participate in both accumulation and detoxification of Pb. These results have successfully provided a basis for further developing Pb polluted water treatment technology by fungi.

The evaluation of resistance to Co 2+ of lawn plant at seedling stage and its concentration property at adult stage

In order to evaluate the resistance of lawn plant to Co²⁺ at germination stage and discuss its concentration property at adult stage, four kinds of lawn plant which have some growth advantages in Co²⁺ polluted environment were selected as experimental materials in this research. They are tall fescue, timothy grass, inflorescences, and annual ryegrass. The results show that the evaluation of resistance to Co²⁺ of tall fescue's seed is the highest; the evaluation of resistance to Co²⁺ of annual ryegrass seed is the lowest. The low consistence Co²⁺ could improve the seed germination. With Co²⁺ concentration increase, the accumulation coefficient of four plants increased at first and decreased later; the accumulation coefficient of underground portion is higher than the accumulation coefficient of aboveground; with Co²⁺ concentration increase, the transfer coefficient of four plants have a remarkable decline. In these plants, the accumulation coefficient of tall fescue and annual ryegrass is bigger than other two plants. As the concentration of Co²⁺ treatment increased to 100 mg/kg, the aboveground enrichment of Co²⁺ in F. elata reached 75 mg/kg, followed by L. multiflorum (68.9 mg/kg), P. pratense (48.8 mg/kg), and D. glomerata (27.2 mg/kg).The highest underground enrichment of Co²⁺ in F. elata reached 836.46 mg/kg, in contrast to the lowest underground enrichment in D. glomerata, 264.67 mg/kg. It shows that fescue and annual ryegrass have a better enrichment property to Co²⁺ and have a better prospect for the treatment of cobalt-contaminated soil. This research could provide some scientific basis and main technical approach for the soil contaminated by Co²⁺.

Promotion of growth and metal accumulation of alfalfa by coinoculation with Sinorhizobium and Agrobacterium under copper and zinc stress

The Legume-Rhizobium symbiosis has been proposed as a promising technique for the phytoremediation of contaminated soils due to its beneficial activity in symbiotic nitrogen fixation. However, numerous studies have shown that excessive heavy metals reduce the efficiency of symbiotic nodulation with Rhizobium and inhibit plant growth. In this study, we aimed to evaluate the synergistic effects of IAA-producing bacteria and Rhizobium on Medicago lupulina growth under Cu and Zn stress. Pot experiments showed that 400 mg kg-1 Cu2 + and Zn2 + greatly inhibited plant growth, but dual inoculation of Medicago lupulina with Sinorhizobium meliloti CCNWSX0020 and Agrobacterium tumefaciens CCNWGS0286 significantly increased the number of nodules and plant biomass by enhancing antioxidant activities. Under double stress of 400 mg kg-1 Cu2 + and Zn2 +, the nodule number and nitrogenase activities of dual-inoculated plants were 48.5% and 154.4% higher, respectively, than those of plants inoculated with Sinorhizobium meliloti. The root and above-ground portion lengths of the dual-inoculated plants were 32.6% and 14.1% greater, respectively, than those of the control, while the root and above-ground portion dry weights were 34.3% and 32.2% greater, respectively, than those of the control. Compared with S. meliloti and A. tumefaciens single inoculation, coinoculation increased total Cu uptake by 39.1% and 47.5% and increased total Zn uptake by 35.4% and 44.2%, respectively, under double metal stress conditions. Therefore, coinoculation with Sinorhizobium meliloti and Agrobacterium tumefaciens enhances metal phytoextraction by increasing plant growth and antioxidant activities under Cu/Zn stress, which provides a new approach for bioremediation in heavy metal-contaminated soil.

The effect of substrates on the removal of low-level vanadium, chromium and cadmium from polluted river water by ecological floating beds

Ecological floating beds (EFBs) is one of the effective methods lately used to remove heavy metals pollutions in water. However, the role of substrate in EFBs was mainly focused on the study of microorganisms, and the effect of substrates on plants enrichment of heavy metals was rarely investigated. This study aimed to investigate the promotion of different substrates (green zeolite, sepiolite, absorbent paper, and ceramsite) on the removal of multi-heavy metals (V, Cr, and Cd) by Acorus calamus L. It also investigated the plant growth status. Results showed that the relative increase rate of Acorus calamus L. fresh weight increased the most in EFBs with green zeolite group (EFB-GZ), which was 60.50%, higher than 38.17% in EFBs with Acorus calamus L. (EFB-A). The enrichment ability of multi-metals in Acorus calamus L. was stronger in EFBs with substrates than in EFB-A, and green zeolite was the best. After 34 days, the total removal efficiency of V, Cr and Cd in EFB-GZ were 79.91%, 95.24% and 91.80%, respectively. Heavy metals translocation from root to shoot influenced by the kinds of substrates. In EFB-GZ, the translocation factor (TF) of V, Cr and Cd were 0.081, 0.263 and 0.180, respectively (0.024, 0.608 and 0.032 in EFB-A). The ability of Acorus calamus L. to resist multi-metals stress was significantly higher in EFBs with substrates than that in EFB-A and the activity of SOD, POD and CAT were increased by heavy metals stress. Our results acquired that green zeolite was the best substrate to promote multi-metals uptake by Acorus calamus L., which could effectively maintain the pH of water, provide a stable environment and nutriment for Acorus calamus L. Green zeolite can promote the translocation of V and Cd from root to shoot in Acorus calamus L., but is not conducive to Cr.

Micromycetes as colonizers of mineral building materials in historic monuments and museums

Complex of microfungi colonizing mineral building materials, i.e. limestone and plaster, in interiors of cultural heritage was characterized. Wide-scale investigation was carried out with fourteen objects studied. We have revealed a specific culturable community. We have analyzed role of obtained microfungi in biodeterioraton process on the basis of our tests (pH and water activity preferences, ability to solubilize CaCO₃) and literature data (substrate preferences and enzyme activities). The species most actively developing in mineral materials in indoor environments were Acremonium charticola, Acremonium furcatum, Lecanicillium sp., Parengyodontium album, Purpureocillium lilacinum and Sarocladium kiliense. Considering this fact and their ability to develop successfully at extremely wide range of pH values from slightly acidic to alkaline ones and their high enzymatic activities we conclude that the listed species are of high interest in seeking the cause of biodeterioration. These species can actively develop in materials penetrating for years deep into the substrates and causing their deterioration in conditions of considerably heightened moisture content. In this group, A. charticola and Lecanicillium sp. were able to solubilize CaCO₃.

Greener Method for the Removal of Toxic Metal Ions from the Wastewater by Application of Agricultural Waste as an Adsorbent

The presence of inorganic pollutants such as metal ions (Ni2+, Pb2+, Cr6+) in water, probably by long-term geochemical changes and from the effluents of various industries, causes diseases and disorders (e.g., cancer, neurodegenerative diseases, muscular dystrophy, hepatitis, and multiple sclerosis). Conventional methods for their removal are limited by technical and economic barriers. In biosorption, low-cost and efficient biomaterials are used for this purpose. In this study, Brassica Campestris stems from the agriculture waste and has been used for the removal of Ni2+, Cr6+ and Pb2+ ions from an aqueous solution containing all the ions. Effect of different parameters, e.g., pH, contact time, metal ion initial concentration, adsorbent dose, agitation rate and temperature were analyzed and optimized. The adsorbent worked well for removal of the Pb2+ and Cr6+ as compared to Ni2+. The atomic absorption spectrophotometer (AAS) and FTIR investigation of adsorbent before and after shows a clear difference in the adsorbent capability. The highest adsorption percentage was found at 98%, 91%, and 49% respectively, under the optimized parameters. Furthermore, the Langmuir isotherm was found better in fitting to the experimental data than that of the Freundlich isotherm.