Molecular engineering of DNA: molecular beacons

Direct detection of circulating free DNA extracted from serum samples of breast cancer using locked nucleic acid molecular beacon

As an emerging noninvasive blood biomarker, circulating free DNA (cfDNA) can be utilized to assess diagnosis, progression and evaluate prognosis of cancer. However, cfDNAs are not "naked", they can be part of complexes, or are bound to the surface of the cells via proteins, which make the detection more challenging. Here, a simple method for the detection of Ubiquitin-like with PHD and ring finger domains 1 (UHRF1) DNA exacted from serum of breast cancer (BC) has been developed using a novel locked nucleic acid molecular beacon (LNA-MB). In order to enhance the stability and detection efficiency of the probe in biofluids, we design a shared-stem molecular beacon containing a 27-mer loop and a 4-mer stem with DNA/LNA alternating bases. The fluorescence is released in the presence of target. The detection procedure is simple and can be completed within 1h. This method shows a sensitive response to UHRF1 DNA with a dynamic range of 3 orders of magnitude. The limit of detection is 11nM (S/N=3) with excellent selectivity. It can discriminate UHRF1 DNA from three-base mismatched DNA with a high specificity. More importantly, this method can distinguish the expression of serum UHRF1 DNA among 5 breast cancer patients and 5 healthy controls. The mentioned superiority may suggest that this assay can be served as a promising noninvasive detection tool for early BC diagnosis and monitoring.

A Biofunctional Molecular Beacon for Detecting Single Base Mutations in Cancer Cells

The development of a convenient and sensitive biosensing system to detect specific DNA sequences is an important issue in the field of genetic disease therapy. As a classic DNA detection technique, molecular beacon (MB) is often used in the biosensing system. However, it has intrinsic drawbacks, including high assay cost, complicated chemical modification, and operational complexity. In this study, we developed a simple and cost-effective label-free multifunctional MB (LMMB) by integrating elements of polymerization primer, template, target recognition, and G-quadruplex into one entity to detect target DNA. The core technique was accomplished by introducing a G-hairpin that features fragments of both G-quadruplex and target DNA recognition in the G-hairpin stem. Hybridization between LMMB and target DNA triggered conformational change between the G-hairpin and the common C-hairpin, resulting in significant SYBR-green signal amplification. The hybridization continues to the isothermal circular strand-displacement polymerization and accumulation of the double-stranded fragments, causing the uninterrupted extension of the LMMB without a need of chemical modification and other assistant DNA sequences. The novel and programmable LMMB could detect target DNA with sensitivity at 250 pmol/l with a linear range from 2 to 100 nmol/l and the relative standard deviation of 7.98%. The LMMB could sense a single base mutation from the normal DNA, and polymerase chain reaction (PCR) amplicons of the mutant-type cell line from the wild-type one. The total time required for preparation and assaying was only 25 minutes. Apparently, the LMMB shows great potential for detecting DNA and its mutations in biosamples, and therefore it opens up a new prospect for genetic disease therapy.

Target DNA induced switches of DNA polymerase activity

A novel concept that target DNA can induce switching of DNA polymerase activity is devised. The method relies on the finding that a DNA aptamer can undergo conformational change upon hybridization with a complementary target DNA, which leads to activation or inactivation of DNA polymerase. This strategy is utilized to identify the presence of target DNA with high levels of sensitivity and selectivity.

Mutually-Reactive, Fluorogenic Hydrocyanine/Quinone Reporter Pairs for In-Solution Biosensing via Nanodroplet Association

Mutually reactive, fluorogenic molecules are presented as a simple and novel technique for in-solution biosensing. The hypothesis behind this work was that aggregating droplets into close proximity would cause rapid mixing of their contents. To take advantage of this effect, a novel pair of fluorogenic redox molecules were designed to remain in lipid-stabilized oil droplets but mix once aggregated. First, the hydrophobic cyanine dye 1,1'-dioctadecyl-3,3,3'3'-tetramethylindocarbocyanine perchlorate (DiI) was reduced with sodium borohydride to form a nonfluorescent analog (HDiI). Hydrophobic quinone derivatives were then screened as oxidizing agents, and it was found that p-fluoranil oxidized nonfluorescent HDiI back to fluorescent DiI. Next, HDiI and p-fluoranil were loaded into NEOBEE oil nanodroplets of average diameter 600 nm that were stabilized by a monolayer of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), 1,2-distearoyl-sn-glycero-3-phosphoethanolamine (DSPE)-polyethylene glycol (PEG), and DSPE-PEG-biotin. Addition of streptavidin caused aggregation of droplets and the appearance of red fluorescent aggregates within 30 min. Next, Nanoparticle Tracking Analysis was used to record the fluorescence of the droplets and their aggregates. By integrating the fluorescence emission of the tracked droplets, streptavidin could be detected down to 100 fM. Finally, the droplets were reformulated to sense for vascular endothelial growth factor (VEGF), a biomarker for tumor metastasis. Using anti-VEGF aptamers attached to DSPE-PEG incorporated into the nanodroplet monolayer, VEGF could also be detected down to 100 fM.

DNA Methyltransferase Activity Assays: Advances and Challenges

DNA methyltransferases (MTases), a family of enzymes that catalyse the methylation of DNA, have a profound effect on gene regulation. A large body of evidence has indicated that DNA MTase is potentially a predictive biomarker closely associated with genetic disorders and genetic diseases like cancer. Given the attention bestowed onto DNA MTases in molecular biology and medicine, highly sensitive detection of DNA MTase activity is essential in determining gene regulation, epigenetic modification, clinical diagnosis and therapeutics. Conventional techniques such as isotope labelling are effective, but they often require laborious sample preparation, isotope labelling, sophisticated equipment and large amounts of DNA, rendering them unsuitable for uses at point-of-care. Simple, portable, highly sensitive and low-cost assays are urgently needed for DNA MTase activity screening. In most recent technological advances, many alternative DNA MTase activity assays such as fluorescent, electrochemical, colorimetric and chemiluminescent assays have been proposed. In addition, many of them are coupled with nanomaterials and/or enzymes to significantly enhance their sensitivity. Herein we review the progress in the development of DNA MTase activity assays with an emphasis on assay mechanism and performance with some discussion on challenges and perspectives. It is hoped that this article will provide a broad coverage of DNA MTase activity assays and their latest developments and open new perspectives toward the development of DNA MTase activity assays with much improved performance for uses in molecular biology and clinical practice.

An ideal detector composed of a 3D Gd-based coordination polymer for DNA and Hg2+ ion

A 3D Gd-based CP was employed as an effective fluorescent sensing platform for DNA and Hg²⁺ ion detection with sensitivity and selectivity, due to its ability to highly quench fluorescence and its different affinities toward ssDNA and dsDNA.

A DNA tetrahedron-based molecular beacon for tumor-related mRNA detection in living cells

We report a DNA tetrahedron-based molecular beacon for tumor-related TK1 mRNA detection in living cells, where the target sequence can induce the tetrahedron from contraction to extension, resulting in fluorescence restoration.

Enzymatic manipulation of a DNA-mediated ensemble for sensitive fluorescence detection of glucose

In this work, controllable turn off/on fluorescent sensors for label-free detection of glucose have been successfully developed by designing different DNA/ligands-based ensembles and using enzyme-catalyzed Fenton reaction.

Cellular processing and destinies of artificial DNA nanostructures

This review gives a panoramic view of the many DNA nanotechnology applications in cells, mechanistic understanding of how and where their interactions occur and their subsequent outcomes.

Cobalt disulfide nanowires as an effective fluorescent sensing platform for DNA detection

Cobalt disulfide nanowires are synthesized in solution using a facile two-step hydrothermal method for the first time and applied as an effective sensing platform for nucleic acid detection.

Fluorescent Labeling of Plasmid DNA and mRNA: Gains and Losses of Current Labeling Strategies

Live-cell imaging has provided the life sciences with insights into the cell biology and dynamics. Fluorescent labeling of target molecules proves to be indispensable in this regard. In this Review, we focus on the current fluorescent labeling strategies for nucleic acids, and in particular mRNA (mRNA) and plasmid DNA (pDNA), which are of interest to a broad range of scientific fields. By giving a background of the available techniques and an evaluation of the pros and cons, we try to supply scientists with all the information needed to come to an informed choice of nucleic acid labeling strategy aimed at their particular needs.

Ultrathin 2D Metal-Organic Framework Nanosheets

A facile surfactant-assisted bottom-up synthetic method to prepare a series of freestanding ultrathin 2D M-TCPP (M = Zn, Cu, Cd or Co, TCPP = tetrakis(4-carboxyphenyl)porphyrin) nanosheets with a thickness of sub-10 nm is developed. As a proof-of-concept application, some of them are successfully used as new platforms for DNA detection. The Cu-TCPP nanosheet-based sensor shows excellent fluorescent sensing performance and is used for the simultaneous detection of multiple DNA targets.

Aptamers Selected by Cell-SELEX for Molecular Imaging

Conventional diagnostics for cancer rely primarily on anatomical techniques. However, these techniques cannot monitor the changes at the molecular level in normal cells, which possibly signal the onset of cancer at its very earliest stages. For accurate prediction of the carcinogenesis at the molecular level, targeting ligands have been used in combination with imaging probes to monitor this biological process. Among these targeting ligands, aptamers have high binding affinity to various targets ranging from small molecules to whole organisms, and, hence, exceptional recognition ability. Many recent studies have been reported on aptamer-based molecular imaging, clearly indicating its clinical and diagnostic utility. In this review, we will discuss some key results of these studies.

A reversible metal ion fueled DNA three-way junction molecular device for "turn-on and -off" fluorescence detection of mercury ions (II) and biothiols respectively with high selectivity and sensitivity

We constructed a reversible molecular device in the nanoscale based on a DNA three-way junction (3WJ) fueled by Hg(2+) binding and sequestration. It is highly responsive to external stimuli, which brings about optically detectable global structural changes. Such a DNA device can serve as a novel "turn-on and -off" fluorescent sensor for Hg(2+) and biothiol detection with high selectivity and sensitivity.

Elaborately designed diblock nanoprobes for simultaneous multicolor detection of microRNAs

Simultaneous detection of multiple biomarkers has important prospects in the biomedical field. In this work, we demonstrated a novel strategy for the detection of multiple microRNAs (miRNAs) based on gold nanoparticles (Au NPs) and polyadenine (polyA) mediated nanoscale molecular beacon (MB) probes (denoted p-nanoMBs). Novel fluorescent labeled p-nanoMBs bearing consecutive adenines were designed, of which polyA served as an effective anchoring block binding to the surface of Au NPs, and the appended hairpin block formed an upright conformation that favored the hybridization with targets. Using the co-assembling method and the improved hybridization conformation of the hairpin probes, we achieved high selectivity for specifically distinguishing DNA targets from single-base mismatched DNA targets. We also realized multicolor detection of three different synthetic miRNAs in a wide dynamic range from 0.01 nM to 200 nM with a detection limit of 10 pM. What's more, we even detected miRNAs in a simulated serum environment, which indicated that our method could be used in complex media. Compared with the traditional method, our strategy provides a promising alternative method for the qualitative and quantitative detection of miRNAs.

Cleavable DNA-protein hybrid molecular beacon: A novel efficient signal translator for sensitive fluorescence anisotropy bioassay

Due to its unique features such as high sensitivity, homogeneous format, and independence on fluorescent intensity, fluorescence anisotropy (FA) assay has become a hotspot of study in oligonucleotide-based bioassays. However, until now most FA probes require carefully customized structure designs, and thus are neither generalizable for different sensing systems nor effective to obtain sufficient signal response. To address this issue, a cleavable DNA-protein hybrid molecular beacon was successfully engineered for signal amplified FA bioassay, via combining the unique stable structure of molecular beacon and the large molecular mass of streptavidin. Compared with single DNA strand probe or conventional molecular beacon, the DNA-protein hybrid molecular beacon exhibited a much higher FA value, which was potential to obtain high signal-background ratio in sensing process. As proof-of-principle, this novel DNA-protein hybrid molecular beacon was further applied for FA bioassay using DNAzyme-Pb(2+) as a model sensing system. This FA assay approach could selectively detect as low as 0.5nM Pb(2+) in buffer solution, and also be successful for real samples analysis with good recovery values. Compatible with most of oligonucleotide probes' designs and enzyme-based signal amplification strategies, the molecular beacon can serve as a novel signal translator to expand the application prospect of FA technology in various bioassays.

A molecular beacon microarray based on a quantum dot label for detecting single nucleotide polymorphisms

In this work, we report the application of streptavidin-coated quantum dot (strAV-QD) in molecular beacon (MB) microarray assays by using the strAV-QD to label the immobilized MB, avoiding target labeling and meanwhile obviating the use of amplification. The MBs are stem-loop structured oligodeoxynucleotides, modified with a thiol and a biotin at two terminals of the stem. With the strAV-QD labeling an "opened" MB rather than a "closed" MB via streptavidin-biotin reaction, a sensitive and specific detection of label-free target DNA sequence is demonstrated by the MB microarray, with a signal-to-background ratio of 8. The immobilized MBs can be perfectly regenerated, allowing the reuse of the microarray. The MB microarray also is able to detect single nucleotide polymorphisms, exhibiting genotype-dependent fluorescence signals. It is demonstrated that the MB microarray can perform as a 4-to-2 encoder, compressing the genotype information into two outputs.

A Locked Nucleic Acid Probe Based on Selective Salt-Induced Effect Detects Single Nucleotide Polymorphisms

Detection of single based genetic mutation by using oligonucleotide probes is one of the common methods of detecting single nucleotide polymorphisms at known loci. In this paper, we demonstrated a hybridization system which included a buffer solution that produced selective salt-induced effect and a locked nucleic acid modified 12 nt oligonucleotide probe. The hybridization system is suitable for hybridization under room temperature. By using magnetic nanoparticles as carriers for PCR products, the SNPs (MDR1 C3435T/A) from 45 volunteers were analyzed, and the results were consistent with the results from pyrophosphoric acid sequencing. The method presented in this paper differs from the traditional method of using molecular beacons to detect SNPs in that it is suitable for research institutions lacking real-time quantitative PCR detecting systems, to detect PCR products at room temperature.

Photoinduced Electron-Transfer-Based Hybridization Probes for Detection of DNA and RNA

Here, we report the synthesis of a hybridization probe for detection of RNA and DNA based on photoinduced electron transfer (PeT). We designed and synthesized an oligonucleotide containing an adenosine analogue with a 9-(N,N-dimethylaminomethyl)anthracenyl moiety at its 6-position via an ethynylene linker as the hybridization probe. When the probe was hybridized with a complementary RNA or DNA, the fluorescence intensity increased 3-fold or 4.5-fold, respectively, compared to the single-stranded state.

Dual-stimuli responsive i-motif/nanoflares for sensing ATP in lysosomes

A dual-stimuli responsive i-motif/nanoflare for molecule detection in lysosomes was designed. By combining the structure-switchable i-motif sequence and high recognition ability of an adenosine triphosphate (ATP) aptamer, subcellular sensing and visualization sensing of ATP in lysosomes at the subcellular level can be achieved. This general sensing technique can be applied for a broad range of cellular communication studies to improve our understanding of subcellular signaling and function.

Universal Fluorescence Biosensor Platform Based on Graphene Quantum Dots and Pyrene-Functionalized Molecular Beacons for Detection of MicroRNAs

A novel biosensor platform was developed for detection of microRNAs (miRNAs) based on graphene quantum dots (GQDs) and pyrene-functionalized molecular beacon probes (py-MBs). Pyrene was introduced to trigger specifically fluorescence resonance energy transfer (FRET) between GQDs and fluorescent dyes labeled on py-MBs, and the unique fluorescent intensity change produced a novel signal for detection of the target. The platform realized detection of miRNAs in a wide range from 0.1 nM to 200 nM with great discrimination abilities, as well as multidetection of different kinds of miRNAs, which paved a brand new way for miRNA detection based on GQDs.

Lab in a Tube: Sensitive Detection of MicroRNAs in Urine Samples from Bladder Cancer Patients Using a Single-Label DNA Probe with AIEgens

We demonstrate an ultrasensitive microRNA detection method based on an extremely simple probe with only fluorogens but without quencher groups. It avoids complex and difficult steps to accurately design the relative distance between the fluorogens and quencher groups in the probes. Furthermore, the assay could accomplish various detection limits by tuning the reaction temperature due to the different activity of exonuclease III corresponding to the diverse temperature. Specifically, 1 pM miR-21 can be detected in 40 min at 37 °C, and 10 aM (about 300 molecules in 50 μL) miR-21 could be discriminated in 7 days at 4 °C. The great specificity of the assay guarantees that the real 21 urine samples from the bladder cancer patients are successfully detected by our method.

General Strategy to Introduce pH-Induced Allostery in DNA-Based Receptors to Achieve Controlled Release of Ligands

Inspired by naturally occurring pH-regulated receptors, here we propose a rational approach to introduce pH-induced allostery into a wide range of DNA-based receptors. To demonstrate this we re-engineered two model DNA-based probes, a molecular beacon and a cocaine-binding aptamer, by introducing in their sequence a pH-dependent domain. We demonstrate here that we can finely tune the affinity of these model receptors and control the load/release of their specific target molecule by a simple pH change.

Design of molecular beacons: 3' couple quenchers improve fluorogenic properties of a probe in real-time PCR assay

Convenient preparation of fluorogenic hairpin DNA probes (molecular beacons) carrying a pair of FAM fluorophores (located close to 5'-terminus of the probe) or a pair of BHQ1 quenchers on 3'-terminus (with (BHQ1)2 or BHQ1-BHQ1 composition) is reported. These probes were used for the first time in a real-time PCR assay and showed considerable improvements in fluorogenic properties (the total fluorescence increase or signal-to-background ratio) in assay conditions vs. conventional one-FAM-one-BHQ1 molecular beacon probes as well as vs. hydrolyzable one-FAM-one-BHQ1 TaqMan probes. At the same time, such multiple modifications of the probe do not influence its Cq (a fractional PCR cycle used for quantification). The probe MB14 containing a BHQ1-BHQ1 pair showed a PCR fluorescence/background value of 9.6 which is more than two times higher than that of a regular probe MB2 (4.6). This study demonstrates prospects for the design of highly fluorogenic molecular beacon probes suitable for quantitative real-time PCR and for other potential applications (e.g. intracellular RNA detection and SNP/mutation analysis).

Aptamer-based biosensors for biomedical diagnostics

Aptamers are single-stranded nucleic acids that selectively bind to target molecules. Most aptamers are obtained through a combinatorial biology technique called SELEX. Since aptamers can be isolated to bind to almost any molecule of choice, can be readily modified at arbitrary positions and they possess predictable secondary structures, this platform technology shows great promise in biosensor development. Over the past two decades, more than one thousand papers have been published on aptamer-based biosensors. Given this progress, the application of aptamer technology in biomedical diagnosis is still in a quite preliminary stage. Most previous work involves only a few model aptamers to demonstrate the sensing concept with limited biomedical impact. This Critical Review aims to summarize progress that might enable practical applications of aptamers for biological samples. First, general sensing strategies based on the unique properties of aptamers are summarized. Each strategy can be coupled to various signaling methods. Among these, a few detection methods including fluorescence lifetime, flow cytometry, upconverting nanoparticles, nanoflare technology, magnetic resonance imaging, electronic aptamer-based sensors, and lateral flow devices have been discussed in more detail since they are more likely to work in a complex sample matrix. The current limitations of this field include the lack of high quality aptamers for clinically important targets. In addition, the aptamer technology has to be extensively tested in a clinical sample matrix to establish reliability and accuracy. Future directions are also speculated to overcome these challenges.

Constitutional Dynamic Chemistry-based New Concept of Molecular Beacons for High Efficient Development of Fluorescent Probes

Inspired by the concept of constitutional dynamic chemistry, we propose a new and well-adaptable strategy for developing molecular beacon (MB)-like fluorescent probes. To demonstrate the strategy, we synthesized and used an amino group containing pyrenyl derivative of cholesterol (CP) for the construction of new fluorescent probes with EDTA and sulfuric acid. The probes as created were successfully used for n-hexane purity checking and Ba(2+)and Pb(2+)sensing, respectively.

Nature-inspired DNA nanosensor for real-time in situ detection of mRNA in living cells

Rapid and precise in situ detection of gene expressions within a single cell is highly informative and offers valuable insights into its state. Detecting mRNA within single cells in real time and nondestructively remains an important challenge. Using DNA nanotechnology and inspired by nature's many examples of "protective-yet-accessible" exoskeletons, we designed our mRNA nanosensor, nano-snail-inspired nucleic acid locator (nano-SNEL), to illustrate these elements. The design of the nano-SNEL is composed of a sensory molecular beacon module to detect mRNA and a DNA nanoshell component, mimicking the functional anatomy of a snail. Accurate and sensitive visualization of mRNA is achieved by the exceptional protection conferred by the nanoshell to the sensory component from nucleases-mediated degradation by approximately 9-25-fold compared to its unprotected counterpart. Our nano-SNEL design strategy improved cell internalization is a demonstration of accurate, dynamic spatiotemporal resolved detection of RNA transcripts in living cells.

Rationally designed molecular beacons for bioanalytical and biomedical applications

Nucleic acids hold promise as biomolecules for future applications in biomedicine and biotechnology. Their well-defined structures and compositions afford unique chemical properties and biological functions. Moreover, the specificity of hydrogen-bonded Watson-Crick interactions allows the construction of nucleic acid sequences with multiple functions. In particular, the development of nucleic acid probes as essential molecular engineering tools will make a significant contribution to advancements in biosensing, bioimaging and therapy. The molecular beacon (MB), first conceptualized by Tyagi and Kramer in 1996, is an excellent example of a double-stranded nucleic acid (dsDNA) probe. Although inactive in the absence of a target, dsDNA probes can report the presence of a specific target through hybridization or a specific recognition-triggered change in conformation. MB probes are typically fluorescently labeled oligonucleotides that range from 25 to 35 nucleotides (nt) in length, and their structure can be divided into three components: stem, loop and reporter. The intrinsic merit of MBs depends on predictable design, reproducibility of synthesis, simplicity of modification, and built-in signal transduction. Using resonance energy transfer (RET) for signal transduction, MBs are further endowed with increased sensitivity, rapid response and universality, making them ideal for chemical sensing, environmental monitoring and biological imaging, in contrast to other nucleic acid probes. Furthermore, integrating MBs with targeting ligands or molecular drugs can substantially support their in vivo applications in theranositics. In this review, we survey advances in bioanalytical and biomedical applications of rationally designed MBs, as they have evolved through the collaborative efforts of many researchers. We first discuss improvements to the three components of MBs: stem, loop and reporter. The current applications of MBs in biosensing, bioimaging and therapy will then be described. In particular, we emphasize recent progress in constructing MB-based biosensors in homogeneous solution or on solid surfaces. We expect that such rationally designed and functionalized MBs will open up new and exciting avenues for biological and medical research and applications.

Biophysical and biological characterization of hairpin and molecular beacon RNase H active antisense oligonucleotides

Antisense oligonucleotides (ASOs) are single stranded, backbone modified nucleic acids, which mediate cleavage of complementary RNA by directing RNase H cleavage in cell culture and in animals. It has generally been accepted that the single stranded state in conjunction with the phosphorothioate modified backbone is necessary for cellular uptake and transport to the active compartment. Herein, we examine the effect of using hairpin structured ASOs to (1) determine if an ASO agent requires a single stranded conformation for efficient RNA knock down, (2) use a fluorophore-quencher labeled ASO to evaluate which moieties the ASO interacts with in cells and examine if cellular distribution can be determined with such probes, and (3) evaluate if self-structured ASOs can improve allele selective silencing between closely related huntingtin alleles. We show that hairpin shaped ASOs can efficiently down-regulate RNA in vitro, but potency correlates strongly negatively with increasing stability of the hairpin structure. Furthermore, self-structured ASOs can efficiently reduce huntingtin mRNA in the central nervous system of mice.

Ten-atom silver cluster signaling and tempering DNA hybridization

Silver clusters with ∼10 atoms are molecules, and specific species develop within DNA strands. These molecular metals have sparsely organized electronic states with distinctive visible and near-infrared spectra that vary with cluster size, oxidation, and shape. These small molecules also act as DNA adducts and coordinate with their DNA hosts. We investigated these characteristics using a specific cluster-DNA conjugate with the goal of developing a sensitive and selective biosensor. The silver cluster has a single violet absorption band (λ(max) = 400 nm), and its single-stranded DNA host has two domains that stabilize this cluster and hybridize with target oligonucleotides. These target analytes transform the weakly emissive violet cluster to a new chromophore with blue-green absorption (λ(max) = 490 nm) and strong green emission (λ(max) = 550 nm). Our studies consider the synthesis, cluster size, and DNA structure of the precursor violet cluster-DNA complex. This species preferentially forms with relatively low amounts of Ag(+), high concentrations of the oxidizing agent O2, and DNA strands with ≳20 nucleotides. The resulting aqueous and gaseous forms of this chromophore have 10 silvers that coalesce into a single cluster. This molecule is not only a chromophore but also an adduct that coordinates multiple nucleobases. Large-scale DNA conformational changes are manifested in a 20% smaller hydrodynamic radius and disrupted nucleobase stacking. Multidentate coordination also stabilizes the single-stranded DNA and thereby inhibits hybridization with target complements. These observations suggest that the silver cluster-DNA conjugate acts like a molecular beacon but is distinguished because the cluster chromophore not only sensitively signals target analytes but also stringently discriminates against analogous competing analytes.

Dual-color control of nucleotide polymerization sensed by a fluorescence actuator

Spatial and temporal control of molecular mechanisms can be achieved using photolabile bonds that connect biomolecules to protective caging groups, which can be cleaved upon irradiation of a specific wavelength, releasing the biomolecule ready-to-use. Here we apply and improve a previously reported strategy to tightly control in vitro transcription reactions. The strategy involves two caging molecules that block both ATP and GTP nucleotides. Additionally, we designed a molecular beacon complementary to the synthesized mRNA to infer its presence through a light signal. Upon release of both nucleotides through a specific monochromatic light (390 and 325 nm) we attain a light signal indicative of a successful in vitro transcription reaction. Similarly, in the absence of irradiation, no intense fluorescence signal was obtained. We believe this strategy could further be applied to DNA synthesis or the development of logic gates.

A two-dimensional molecular beacon for mRNA-activated intelligent cancer theranostics

A two-dimensional quantum dot molecular beacon with interconnected imaging and therapy modalities is developed for intelligent cancer theranostics.

Ideal theranostics should possess directly correlated imaging and therapy modalities that could be simultaneously activated in the disease site to generate high imaging contrast and therapeutic efficacy with minimal side effects. However, so far it still remains challenging to engineer all these characteristics into a single theranostic probe. Herein, we report a new type of photosensitizer (PS)-derived “two-dimensional” molecular beacon (TMB) that could be specifically activated within tumor cells to exhibit both high imaging contrast and therapeutic efficacy that outperforms conventional photosensitizers for cancer theranostics. The TMB is constructed by integrating a photosensitizer (chlorin e6 (Ce6)), a quantum dot (QD), and a dark quencher (BHQ3) into a hairpin DNA molecule to generate multiple synergistic FRET modes. The imaging modality and therapy modality, which are mediated by FRET between the QD and BHQ3 and FRET between the QD and Ce6 respectively, are interconnected within the TMB and could be simultaneously activated by tumor mRNA molecules. We show that highly effective cancer imaging and therapy could be achieved for cancer cell lines and xenografted tumor models. The reported TMB represents an unprecedented theranostic platform for intelligent cancer theranostics.

Surface plasmon resonance biosensor for highly sensitive detection of microRNA based on DNA super-sandwich assemblies and streptavidin signal amplification

MicroRNAs (miRNAs) play an important regulatory role in cells and dysregulation of miRNA has been associated with a variety of diseases, making them a promising biomarker. In this work, a novel biosensing strategy has been developed for label-free detection of miRNA using surface plasmon resonance (SPR) coupled with DNA super-sandwich assemblies and biotin-strepavidin based amplification. The target miRNA is selectively captured by surface-bound DNA probes. After hybridization, streptavidin is employed for signal amplification via binding with biotin on the long DNA super-sandwich assemblies, resulting in a large increase of the SPR signal. The method shows very high sensitivity, capable of detecting miRNA at the concentration down to 9 pM with a wide dynamic range of 6 orders of magnitude (from 1 × 10(-11) M to 1 × 10(-6) M) in 30 min, and excellent specificity with discriminating a single base mismatched miRNA sequence. This biosensor exhibits good reproducibility and precision, and has been successfully applied to the detection of miRNA in total RNA samples extracted from human breast adenocarcinoma MCF-7 cells. It, therefore, offers a highly effective alternative approach for miRNA detection in biomedical research and clinical diagnosis.

Label-free luminescence switch-on detection of hepatitis C virus NS3 helicase activity using a G-quadruplex-selective probe

A series of luminescent Ir(iii) complexes were synthesised and evaluated for their ability to act as luminescent G-quadruplex-selective probes. The Ir(iii) complex 9, [Ir(phq)2(phen)]PF6 (where phq = 2-phenylquinoline; phen = 1,10-phenanthroline), exhibited high luminescence in the presence of G-quadruplex DNA compared to dsDNA and ssDNA, and was employed to construct a label-free G-quadruplex-based assay for hepatitis C virus NS3 helicase activity in aqueous solution. Moreover, the application of the assay for screening potential helicase inhibitors was demonstrated. To our knowledge, this is the first G-quadruplex-based assay for helicase activity.

DNA-templated silver nanoclusters for multiplexed fluorescent DNA detection

Novel label-free/conjugation-free molecular beacons are designed based on DNA templated-silver nanoclusters for multiplexed DNA detection. The assay is implemented in solution, which makes it easy for the in-situ and real-time analysis. This study demonstrates a new method for multiplexd detection of biological molecules by using fluorescent Ag nanocluster-based molecular beacon probes.

Nanomaterial-based biosensors using dual transducing elements for solution phase detection

Biosensors incorporating nanomaterials have demonstrated superior performance compared to their conventional counterparts. Most reported sensors use nanomaterials as a single transducer of signals, while biosensor designs using dual transducing elements have emerged as new approaches to further improve overall sensing performance. This review focuses on recent developments in nanomaterial-based biosensors using dual transducing elements for solution phase detection. The review begins with a brief introduction of the commonly used nanomaterial transducers suitable for designing dual element sensors, including quantum dots, metal nanoparticles, upconversion nanoparticles, graphene, graphene oxide, carbon nanotubes, and carbon nanodots. This is followed by the presentation of the four basic design principles, namely Förster Resonance Energy Transfer (FRET), Amplified Fluorescence Polarization (AFP), Bio-barcode Assay (BCA) and Chemiluminescence (CL), involving either two kinds of nanomaterials, or one nanomaterial and an organic luminescent agent (e.g. organic dyes, luminescent polymers) as dual transducers. Biomolecular and chemical analytes or biological interactions are detected by their control of the assembly and disassembly of the two transducing elements that change the distance between them, the size of the fluorophore-containing composite, or the catalytic properties of the nanomaterial transducers, among other property changes. Comparative discussions on their respective design rules and overall performances are presented afterwards. Compared with the single transducer biosensor design, such a dual-transducer configuration exhibits much enhanced flexibility and design versatility, allowing biosensors to be more specifically devised for various purposes. The review ends by highlighting some of the further development opportunities in this field.

Simultaneous Visualization of Multiple mRNAs and Matrix Metalloproteinases in Living Cells Using a Fluorescence Nanoprobe

Simultaneous monitoring of multiple tumour markers is of great significance for improving the accuracy of early cancer detection. In this study, a fluorescence nanoprobe has been prepared that can simultaneously monitor and visualize multiple mRNAs and matrix metalloproteinases (MMPs) in living cells. Confocal fluorescence imaging results indicate that the nanoprobe could effectively distinguish between cancer cells and normal cells even if one tumour maker of normal cells was overexpressed. Furthermore, it can detect changes in the expression levels of mRNAs and MMPs in living cells. The current approach could provide new tools for early cancer detection and monitoring the changes in expression levels of biomarkers during tumour progression.

A survey of advancements in nucleic acid-based logic gates and computing for applications in biotechnology and biomedicine

Nucleic acid-based logic devices were first introduced in 1994. Since then, science has seen the emergence of new logic systems for mimicking mathematical functions, diagnosing disease and even imitating biological systems. The unique features of nucleic acids, such as facile and high-throughput synthesis, Watson-Crick complementary base pairing, and predictable structures, together with the aid of programming design, have led to the widespread applications of nucleic acids (NA) for logic gate and computing in biotechnology and biomedicine. In this feature article, the development of in vitro NA logic systems will be discussed, as well as the expansion of such systems using various input molecules for potential cellular, or even in vivo, applications.