Development of structural complexity by liquid-crystal self-assembly

Functional Liquid Crystals towards the Next Generation of Materials

Since the discovery of the liquid-crystalline state in 1888, liquid crystal science has made great advances through fusion with various technologies and disciplines. Recently, new molecular design strategies and new self-assembled structures have been developed as a result of the progress made in synthetic procedures and characterization techniques. Since these liquid crystals exhibit new functions and properties derived from their nanostructures and alignment, a variety of new functions for liquid crystals, such as transport for energy applications, separation for environmental applications, chromism, sensing, electrooptical effects, actuation, and templating have been proposed. This Review presents recent advances of liquid crystals that should contribute to the next generation of materials.

Morphology-Variable Aggregates Prepared from Cholesterol-Containing Amphiphilic Glycopolymers: Their Protein Recognition/Adsorption and Drug Delivery Applications

In this study, a series of diblock glycopolymers, poly(6-O-methacryloyl-d-galactopyranose)-b-poly(6-cholesteryloxyhexyl methacrylate) (PMAgala-b-PMAChols), with cholesterol/galactose grafts were prepared through a sequential reversible addition-fragmentation chain transfer (RAFT) polymerization and deprotection process. The glycopolymers could self-assemble into aggregates with various morphologies depending on cholesterol/galactose-containing block weight ratios, as determined by transmission electronic microscopy (TEM) and dynamic laser light scattering (DLS). In addition, the lectin (Ricinus communis agglutinin II, RCA120) recognition and bovine serum albumin (BSA) adsorption of the PMAgala-b-PMAChol aggregates were evaluated. The SK-Hep-1 tumor cell inhibition properties of the PMAgala-b-PMAChol/doxorubicin (DOX) complex aggregates were further examined in vitro. Results indicate that the PMAgala-b-PMAChol aggregates with various morphologies showed different interaction/recognition features with RCA120 and BSA. Spherical aggregates (d ≈ 92 nm) possessed the highest RCA120 recognition ability and lowest BSA protein adsorption. In addition, the DOX-loaded spherical complex aggregates exhibited a better tumor cell inhibition property than those of nanofibrous complex aggregates. The morphology-variable aggregates derived from the amphiphilic glycopolymers may serve as multifunctional biomaterials with biomolecular recognition and drug delivery features.

Hydrogen-bonded mesomorphic complexes combining hydrophilic and fluorophilic molecular segments

A 2,4-diamino-6-phenyl-1,3,5-triazine carrying a single oligo(ethylene oxide) (EO) chain has been investigated in binary mixtures with two-chain and three-chain semiperfluorinated benzoic acids. Mixtures of the triazine with three equivalents of the complementary acids exhibit a hexagonal columnar (Col_h) mesophase. Docking of three acid molecules to the diaminotriazine nucleus leads to the formation of disc-like aggregates with a central hydrogen-bonded polar core surrounded by the peripheral fluoroalkyl chains, which self-assemble in columns arranged on a hexagonal lattice. The polar EO chains at the triazine cores do not segregate into a distinct sub-space but are included into the polar cores, providing increased flexibility of the cores with respect to conformations and available hydrogen bonding sites. In equimolar (1 : 1) triazine/benzoic acid mixtures macroscopic phase separation of excess triazine from the columnar LC phases occurs. These Col_h phases are formed by [1 : 3] or [2 : 4] complexes, depending on the number of fluorinated chains. However, some of the excess triazine component is accommodated within the polar column cores, contributing to space filling and providing additional hydrogen bonding along the columns. Thus the EO chain, despite of being fixed at the periphery, assemble in the core region of the aggregates, this is distinct from the self-assembly of related alkyl or semiperfluoroalkyl substituted diaminotriazines with fluorinated benzoic acids, forming discrete disc-like [1 : 3] or rod-like [1 : 1] complexes. Obviously, the flexible EO chains decrease the effect of the aggregate shape on self-assembly and lead to an increased contribution of general amphiphilicity to self-assembly.

Trigonal columnar self-assembly of bent phasmid mesogens

Three compounds with a bent rod-like aromatic core and with three alkoxy chains at each end were synthesised by click reaction. The compounds form a columnar liquid crystal phase with non-centrosymmetric trigonal p31m symmetry, the columns having a 3-arm star-like cross-section.

2D Organic Materials for Optoelectronic Applications

The remarkable merits of 2D materials with atomically thin structures and optoelectronic attributes have inspired great interest in integrating 2D materials into electronics and optoelectronics. Moreover, as an emerging field in the 2D-materials family, assembly of organic nanostructures into 2D forms offers the advantages of molecular diversity, intrinsic flexibility, ease of processing, light weight, and so on, providing an exciting prospect for optoelectronic applications. Herein, the applications of organic 2D materials for optoelectronic devices are a main focus. Material examples include 2D, organic, crystalline, small molecules, polymers, self-assembly monolayers, and covalent organic frameworks. The protocols for 2D-organic-crystal-fabrication and -patterning techniques are briefly discussed, then applications in optoelectronic devices are introduced in detail. Overall, an introduction to what is known and suggestions for the potential of many exciting developments are presented.

Columnar self-assembly of luminescent bent-shaped hexacatenars with a central pyridine core connected with substituted 1,3,4-oxadiazole and thiadiazoles

Multifunctional pyridine based bent shaped polycatenars stabilizing liquid crystalline and organogel self-assembly.

Directed Self-Assembly of Liquid-Crystalline Molecular Building Blocks for Sub-5 nm Nanopatterning

The thin-film directed self-assembly of molecular building blocks into oriented nanostructure arrays enables next-generation lithography at the sub-5 nm scale. Currently, the fabrication of inorganic arrays from molecular building blocks is restricted by the limited long-range order and orientation of the materials, as well as suitable methodologies for creating lithographic templates at sub-5 nm dimensions. In recent years, higher-order liquid crystals have emerged as functional thin films for organic electronics, nanoporous membranes, and templated synthesis, which provide opportunities for their use as lithographic templates. By choosing examples from these fields, recent progress toward the design of molecular building blocks is highlighted, with an emphasis on liquid crystals, to access sub-5 nm features, their directed self-assembly into oriented thin films, and, importantly, the fabrication of inorganic arrays. Finally, future challenges regarding sub-5 nm patterning with liquid crystals are discussed.

Synthesis and characterization of new H-shaped triphenylene discotic room-temperature liquid crystal tetramers by a copper-free click reaction

A series of new H-shaped triphenylene discotic liquid crystal tetramers has been designed and synthesized using a copper-free [3+2] cycloaddition reaction.

A skeletal double gyroid formed by single coaxial bundles of catechol based bolapolyphiles

A new cubic phase is reported, formed by two networks of rod-bundles with one molecule length and containing discrete polar aggregates at the junctions.

Transition between tangential and co-axial liquid crystalline honeycombs in the self-assembly of Y-shaped bolapolyphiles

A new liquid crystalline honeycomb with an organization of π-conjugated rods parallel to the honeycomb cells is formed by molecular self-assembly.

Smectic phases in ionic liquid crystals

Ionic liquid crystals (ILCs) are anisotropic mesogenic molecules which carry charges and therefore combine properties of liquid crystals, e.g. the formation of mesophases, and of ionic liquids, such as low melting temperatures and tiny triple-point pressures. Previous density functional calculations have revealed that the phase behavior of ILCs is strongly affected by their molecular properties, i.e. their aspect ratio, the loci of the charges, and their interaction strengths. Here, we report new findings concerning the phase behavior of ILCs as obtained by density functional theory and Monte Carlo simulations. The most important result is the occurrence of a novel, wide smectic-A phase [Formula: see text], at low temperature, the layer spacing of which is larger than that of the ordinary high-temperature smectic-A phase [Formula: see text]. Unlike the ordinary smectic S _A phase, the structure of the [Formula: see text] phase consists of alternating layers of particles oriented parallel to the layer normal and oriented perpendicular to it.

Molecular dynamics simulation of thermotropic bolaamphiphiles with a swallow-tail lateral chain: formation of cubic network phases

T-shaped bolaamphiphiles (TBA) with a swallow-tail lateral chain have been found to provide a fertile platform to produce complex liquid crystalline phases that are accessible through changes of temperature and lateral chain length and design. In this work, we use molecular simulations of a simple coarse-grained model to map out the phase behavior of this type of molecules. This model is based on the premise that the crucial details of the fluid structure stem from close range repulsions and the strong directional forces typical of hydrogen bonds. Our simulations confirm that TBAs exhibit a rich phase behavior upon increasing the length of their lateral chain. The simulations detect a double gyroid phase and an axial-bundle columnar phase which bear some structural resemblance to those found in the experiment. In addition, simulations predict two cocontinuous phases with 3D-periodicity: the "single" diamond and the "single" plumber's nightmare phase. Our analysis of energetic and entropic contributions to the free energy of phases formed by TBA with either swallow-tail or linear side-chains suggest that the 3D-periodic network phases formed by the former are stabilized by the large conformation entropy of the side-chains.

Self-Assembly of Mesophases from Nanoparticles

A growing number of crystalline and quasi-crystalline structures have been formed by coating nanoparticles with ligands, polymers, and DNA. The design of nanoparticles that assemble into mesophases, such as those formed by block copolymers, would combine the order, mobility, and stimuli responsive properties of mesophases with the electronic, magnetic, and optical properties of nanoparticles. Here we use molecular simulations to demonstrate that binary mixtures of unbound particles with simple short-ranged pair interactions produce the same mesophases as block copolymers and surfactants, including lamellar, hexagonal, gyroid, body-centered cubic, face-centered cubic, perforated lamellar, and semicrystalline phases. The key to forming the mesophases is the frustrated attraction between particles of different types, achieved through control over interparticle size and over strength and softness of the interaction. Experimental design of nanoparticles with effective interactions described by the potentials of this work would provide a distinct, robust route to produce ordered tunable liquid crystalline mesophases from nanoparticles.

Polyphilic hydrogen bonded block molecules involving semiperfluorinated and silylated molecular fragments

2,4-Diamino-6-phenyl-1,3,5-triazines grafted with one or two semiperfluorinated chains at the phenyl substituent have been investigated in binary mixtures with one-chain and two-chain oligo(dimethylsiloxy) terminated 4-alkoxy- and 3,4-dialkoxybenzoic acids. Equimolar mixtures of the triazines with the complementary acids form discrete double hydrogen-bonded heterodimers with an elongated central core. Mesomorphic properties are observed only if at least two terminal fluoroalkyl chains are attached to the triazine entity. Three to four heterodimers generate aggregates with preferably parallel adjusted rod-like H-bonded cores. The space requirement of the segregated peripheral fluoroalkyl and oligosiloxane segments considerably exceeds that of the central core region, leading to an overall circular geometry of the associates which organize in columnar LC phases. The chains initiate a local segregation which is however not long range and retains a time and space averaged two-dimensional hexagonal lattice.

Effects of Lateral and Terminal Chains of X-Shaped Bolapolyphiles with Oligo(phenylene ethynylene) Cores on Self-Assembly Behaviour. Part 1: Transition between Amphiphilic and Polyphilic Self-Assembly in the Bulk

Polyphilic self-assembly leads to compartmentalization of space and development of complex structures in soft matter on different length scales, reaching from the morphologies of block copolymers to the liquid crystalline (LC) phases of small molecules. Whereas block copolymers are known to form membranes and interact with phospholipid bilayers, liquid crystals have been less investigated in this respect. Here, series of bolapolyphilic X-shaped molecules were synthesized and investigated with respect to the effect of molecular structural parameters on the formation of LC phases (part 1), and on domain formation in phospholipid bilayer membranes (part 2). The investigated bolapolyphiles are based on a rod-like π-conjugated oligo(phenylene ethynylene) (OPE) core with two glycerol groups being either directly attached or separated by additional ethylene oxide (EO) units to both ends. The X-shape is provided by two lateral alkyl chains attached at opposite sides of the OPE core, being either linear, branched, or semiperfluorinated. In this report, the focus is on the transition from polyphilic (triphilic or tetraphilic) to binary amphiphilic self-assembly. Polyphilic self-assembly, i.e., segregation of all three or four incorporated units into separate nano-compartments, leads to the formation of hexagonal columnar LC phases, representing triangular honeycombs. A continuous transition from the well-defined triangular honeycomb structures to simple hexagonal columnar phases, dominated by the arrangement of polar columns on a hexagonal lattice in a mixed continuum formed by the lipophilic chains and the OPE rods, i.e., to amphiphilic self-assembly, was observed by reducing the length and volume of the lateral alkyl chains. A similar transition was found upon increasing the length of the EO units involved in the polar groups. If the lateral alkyl chains are enlarged or replaced by semiperfluorinated chains, then the segregation of lateral chains and rod-like cores is retained, even for enlarged polar groups, i.e., the transition from polyphilic to amphiphilic self-assembly is suppressed.

Polyphilic Interactions as Structural Driving Force Investigated by Molecular Dynamics Simulation (Project 7)

We investigated the effect of fluorinated molecules on dipalmitoylphosphatidylcholine (DPPC) bilayers by force-field molecular dynamics simulations. In the first step, we developed all-atom force-field parameters for additive molecules in membranes to enable an accurate description of those systems. On the basis of this force field, we performed extensive simulations of various bilayer systems containing different additives. The additive molecules were chosen to be of different size and shape, and they included small molecules such as perfluorinated alcohols, but also more complex molecules. From these simulations, we investigated the structural and dynamic effects of the additives on the membrane properties, as well as the behavior of the additive molecules themselves. Our results are in good agreement with other theoretical and experimental studies, and they contribute to a microscopic understanding of interactions, which might be used to specifically tune membrane properties by additives in the future.

3D Orientational Control in Self-Assembled Thin Films with Sub-5 nm Features by Light

While self-assembled molecular building blocks could lead to many next-generation functional organic nanomaterials, control over the thin-film morphologies to yield monolithic sub-5 nm patterns with 3D orientational control at macroscopic length scales remains a grand challenge. A series of photoresponsive hybrid oligo(dimethylsiloxane) liquid crystals that form periodic cylindrical nanostructures with periodicities between 3.8 and 5.1 nm is studied. The liquid crystals can be aligned in-plane by exposure to actinic linearly polarized light and out-of-plane by exposure to actinic unpolarized light. The photoalignment is most efficient when performed just under the clearing point of the liquid crystal, at which the cylindrical nanostructures are reoriented within minutes. These results allow the generation of highly ordered sub-5 nm patterns in thin films at macroscopic length scales, with control over the orientation in a noncontact fashion.

A new cubic Ia3̅d crystal structure observed in a model single component system by molecular dynamics simulation

In our molecular dynamics simulations of the system of identical particles interacting through the harmonic-repulsive pair potential, we observed the formation of a cubic crystal structure that belongs to the Ia3̅d (#230) crystallographic space group. This crystal structure has not been previously seen either in experiments or in computer simulations, though its framework topology has been known from theoretical crystallographic considerations. Its unit cell contains 16 atoms, occupying only (16b) Wyckoff site, and arranged as two mutually intertwined unconnected networks with packing fraction of 0.37. The appearance of this structure is explained by the soft repulsive nature of the interaction potential. The observed Ia3̅d structure extends the small number of cubic structures formed in single component systems with spherically symmetric pair potentials in MD simulations. We speculate that materials with such structure could be found in soft matter systems or in selected crystals under high pressure.

Emergence of tilt in square honeycomb liquid crystals

First liquid crystalline phases with tilted organization of rod-like aromatics in a square honeycomb structure were discovered. The developing tilt is temperature, chain length and chain volume dependent, and has a dramatic effect on the optical properties, occasionally leading to an inversion of birefringence. The observed effects of chain branching on tilt contributes to a general understanding of lateral chain engineering in tailoring the self-assembly of π-conjugated molecular rods.

Transition from nematic to gyroid-type cubic soft self-assembly by side-chain engineering of π-conjugated sticky rods

A sequence of liquid crystalline phases, involving cybotactic nematics, a lamellar phase, bicontinuous cubics and triangular honeycombs, was observed for oligo(phenylene ethynylene) based X-shaped bolapolyphiles with two long lateral alkyl chains and sticky ends provided by glycerol groups. In the cubic phase with Ia3[combining macron]d lattice - which is tailored by alkyl chain engineering - the aromatic cores are organized on the gyroid minimal surface in 3D curved layers of almost parallel aligned π-conjugated rods. It is shown that this type of cubic phase is a general mode of soft self-assembly of X-shaped bolapolyphiles at the cross-over from the (long or short range) lamellar to the triangular honeycomb-like organization. Cubic phase formation is found only in a narrow range with respect to temperature and chain-length for the non-fluorinated compounds and in much wider ranges for related core-fluorinated molecules.

Study of Cr→SmA phase transition and hydrogen bonding in four-ring bent-core liquid crystal

A newly designed asymmetrical four-ring bent-core compound (4'-n-decyloxyphenylazo)-phenyl-4-yl-3-[N-(4'-n-octadecyloxy-2-hydroxybenzylidene) amino]-2-methyl benzoate exhibiting liquid crystalline behavior was synthesized and characterized. The thermal and textural morphology were studied using differential scanning calorimetry and polarizing optical microscopy, respectively. The study of hydrogen bonding and dynamics of the phase transition has been performed at the molecular level using temperature dependent Fourier transform infrared (FTIR) spectroscopy. The spectral analysis of OH, CH₂/CH₃, CO, and CN stretching vibrational bands revealed clear signatures of Cr→SmA phase transition at 125°C. Density functional theory has been adopted for the geometry optimization and conformational study of the monomer using the B3LYP/6-31G(d) method. The conformational analysis has been performed to predict the most stable conformer along with the possible conformers using one-dimensional potential energy scan employing the same level of theory. The combination of experimental findings and theoretical analysis helped to understand the mechanism of phase transitions at the molecular level.

Unraveling the Driving Forces in the Self-Assembly of Monodisperse Naphthalenediimide-Oligodimethylsiloxane Block Molecules

Block molecules belong to a rapidly growing research field in materials chemistry in which discrete macromolecular architectures bridge the gap between block copolymers (BCP) and liquid crystals (LCs). The merging of characteristics from both BCP and LCs is expected to result in exciting breakthroughs, such as the discovery of unexpected morphologies or significant shrinking of domain spacings in materials that possess the high definition of organic molecules and the processability of polymers. Here we report the bulk self-assembly of two families of monodisperse block molecules comprised of naphthalenediimides (NDIs) and oligodimethylsiloxanes (ODMS). These materials are characterized by waxy texture, strong long-range order, and very low mobility, typical properties of conformationally disordered crystals. Our investigation unambiguously reveals that thermodynamic immiscibility and crystallization direct the self-assembly of ODMS-based block molecules. We show that a synergy of high incompatibility between the blocks and crystallization of the NDIs causes nanophase separation, giving access to hexagonally packed columnar (Colh) and lamellar (LAM) morphologies with sub-10 nm periodicities. The domain spacings can be tuned by mixing molecules with different ODMS lengths and the same number of NDIs, introducing an additional layer of control. X-ray scattering experiments reveal macrophase separation whenever this constitutional bias is not observed. Finally, we highlight our "ingredient approach" to obtain perfect order in sub-10 nm structured materials with a simple strategy built on a crystalline "hard" moiety and an incompatible "soft" ODMS partner. Following this simple rule, our recipe can be extended to a number of systems.

Low-symmetry sphere packings of simple surfactant micelles induced by ionic sphericity

Supramolecular self-assembly enables access to designer soft materials that typically exhibit high-symmetry packing arrangements, which optimize the interactions between their mesoscopic constituents over multiple length scales. We report the discovery of an ionic small molecule surfactant that undergoes water-induced self-assembly into spherical micelles, which pack into a previously unknown, low-symmetry lyotropic liquid crystalline Frank-Kasper σ phase. Small-angle X-ray scattering studies reveal that this complex phase is characterized by a gigantic tetragonal unit cell, in which 30 sub-2-nm quasispherical micelles of five discrete sizes are arranged into a tetrahedral close packing, with exceptional translational order over length scales exceeding 100 nm. Varying the relative concentrations of water and surfactant in these lyotropic phases also triggers formation of the related Frank-Kasper A15 sphere packing as well as a common body-centered cubic structure. Molecular dynamics simulations reveal that the symmetry breaking that drives the formation of the σ and A15 phases arises from minimization of local deviations in surfactant headgroup and counterion solvation to maintain a nearly spherical counterion atmosphere around each micelle, while maximizing counterion-mediated electrostatic cohesion among the ensemble of charged particles.

Optically Active Cubic Liquid Crystalline Phase Made of Achiral Polycatenar Stilbene Derivatives

Achiral stilbene polycatenars forming smectic, columnar or cubic phase depending on the terminal chains length, were studied. The cubic Im3m phase exhibited optical activity originating in twisted face-to-face molecular aggregates. The optical activity of the phase is preserved upon sample crystallization, providing evidence of a transfer of chirality on a molecular level.

Phase diagram of elastic spheres

Experiments show that polymeric nanoparticles often self-assemble into several non-close-packed lattices in addition to the face-centered cubic lattice. Here, we explore theoretically the possibility that the observed phase sequences may be associated with the softness of the particles, which are modeled as elastic spheres interacting upon contact. The spheres are described by two finite-deformation theories of elasticity, the modified Saint-Venant-Kirchhoff model and the neo-Hookean model. We determine the range of indentations where the repulsion between the spheres is pairwise additive and agrees with the Hertz theory. By computing the elastic energies of nine trial crystal lattices at densities far beyond the Hertzian range, we construct the phase diagram and find the face- and body-centered cubic lattices as well as the A15 lattice and the simple hexagonal lattice, with the last two being stable at large densities where the spheres are completely faceted. These results are qualitatively consistent with observations, suggesting that deformability may indeed be viewed as a generic property that determines the phase behavior in nanocolloidal suspensions.

Photosensitive bent-core liquid crystals based on methyl substituted 3-hydroxybenzoic acid

Photosensitive liquid crystals are of contemporary interest not only from the scientific point of view but also for various applications. The chemical structure of materials is used to tune their mesomorphic and photosensitive properties.

Development of Glassy Bicontinuous Cubic Liquid Crystals for Solid Proton-Conductive Materials

Glassy bicontinuous cubic liquid crystals are developed to be a matrix having a hydrophilic infinite periodic minimal surface (IPMS). They function as a scaffold for water, leading to the formation of a 3D continuous hydrogen-bonding network of water molecules along the IPMS. This material design is advantageous for developing novel electrolytes with rigidity and high proton conductivity.