Antigenicity and immunogenicity of collagen

Crosslinked Chitosan-PEG Hydrogel for Culture of Human Glioblastoma Cell Spheroids and Drug Screening

Two-dimensional monolayer cell cultures are routinely utilized for preclinical cancer drug screening, but the results often do not translate well when drugs are tested in vivo. To address this limitation, a biocompatible chitosan-PEG hydrogel (CSPG gel) was synthesized to create a gel that can be easily dispensed into 96-well plates at room temperature and neutral pH. The stiffness of this gel was tailored to be within the stiffness range of human glioblastoma tissue to promote the formation of tumor spheroids. Differences in cell morphology, proliferation rate, and dose-dependent drug cytotoxicity were compared among cell spheroids grown on CSPG gels, cells in monolayer culture on tissue culture polystyrene and cells cultured on Matrigel. Tumor spheroids on CSPG gels displayed statistically significantly greater resistance to chemotherapeutics than in the conditions where cells did not form spheroids. Gene expression analysis suggests that resistance of cells on CSPG gels to the therapy may be partially attributed to upregulation of ATP-binding cassette transporters and downregulation of DNA mismatch repair genes, which was stimulated by spheroid formation. These findings suggest CSPG gel generates tumor spheroids that better reflect the malignant behavior of GBM and provides a cost-effective substrate for preclinical, high-throughput screening of potential cancer therapeutics.

Acellular Fish Skin Grafts and Pig Urinary Bladder Matrix Assessed in the Collagen-Induced Arthritis Mouse Model

It is vital that cellular- and tissue-based products (CTPs) used for wound treatment do not provoke autoimmunity. In this study, the immunogenic response to extracts of 2 CTPs of piscine and porcine origin was assessed in the collagen-induced arthritis model. Male DBA/1J mice were divided into 4 groups, each composed of 7 to 9 animals. Each animal was injected with one of following to assess their immune responses: (1) bovine type II collagen (100 µg) in Freund's adjuvant, (2) extract of piscine skin (100 µg) in Freund's adjuvant, (3) extract of porcine urinary bladder matrix (100 µg) in Freund's adjuvant, or (4) Freund's adjuvant alone (control) at the beginning of the experiment and 3 weeks later. Clinical signs of arthritis were assessed from week 5 onwards, and anti-type II and anti-type I collagen antibody immunoglobulin G (IgG) serum levels were measured before injections and 8 weeks after exposure using enzyme-linked immunosorbent assays. Only the mice exposed to bovine type II collagen developed clinical arthritis accompanied by very high anti-type II collagen IgG serum levels. Anti-type II collagen IgG serum levels were also detected in the porcine group but were undetectable in the piscine skin and control groups after 8 weeks. There were no significant differences in anti-type I collagen IgG serum levels among the groups. The results showed that piscine skin did not provoke systemic autoimmunity against type II collagens in DBA/1J mice.

Storage stability of electrospun pure gelatin stabilized with EDC/Sulfo-NHS

With the rapid development of biomimetic polymers for cell-based assays and tissue engineering, crosslinking electrospun nanofibrous biopolymer constructs is of great importance for achieving sustainable and efficient three-dimensional scaffold constructs. Uncrosslinked electrospun gelatin nanofibrous constructs immediately and completely dissolved in aqueous solutions due to their aqueous solubility and poor storage stability. Here, a novel and versatile approach for the fabrication and crosslinking of electrospun gelatin construct with tunable porosity and high aspect ratio nanofibers is presented. Uncrosslinked electrospun gelatin/genipin nanofibrous and pure gelatin nanofibrous constructs exhibited smooth surfaces that were well-defined, with a diameter in the range of 448 ± 364 nm and 257 ± 57 nm, respectively. Dehydrothermal, genipin-EDC/Sulfo-NHS, and EDC/Sulfo-NHS crosslinking approaches were examined to achieve insoluble gelatin nanofibrous constructs that were suitable for cell-based assays. Mechanical characterization demonstrated that the pure gelatin nanofibrous construct crosslinked via EDC/Sulfo-NHS exhibited an increased mechanical strength and stiffness and showed no dissolution in aqueous solutions and retained its fiber morphology. An excellent 1 month storage stability was demonstrated at 22, 4, -20, and -80°C (dehydrated) and at 4°C (hydrated). The as-crosslinked gelatin nanofibrous construct was highly biocompatible (90% cell viability), as demonstrated by the promoted proliferation of PC12 cells.

Advances in Tendon and Ligament Tissue Engineering: Materials Perspective

Introduction. Tendons are specialised, heterogeneous connective tissues, which represent a significant healthcare challenge after injury. Primary surgical repair is the gold standard modality of care; however, it is highly dependent on the extent of injuries. Tissue engineering represents an alternative solution for good tissue integration and regeneration. In this review, we look at the advanced biomaterial composites employed to improve cellular growth while providing appropriate mechanical properties for tendon and ligament repair. Methodology. Comprehensive literature searches focused on advanced composite biomaterials for tendon and ligament tissue engineering. Studies were categorised depending on the application. Results. In the literature, a range of natural and/or synthetic materials have been combined to produce composite scaffolds tendon and ligament tissue engineering. In vitro and in vivo assessment demonstrate promising cellular integration with sufficient mechanical strength. The biological properties were improved with the addition of growth factors within the composite materials. Most in vivo studies were completed in small-scale animal models. Conclusions. Advanced composite materials represent a promising solution to the challenges associated with tendon and ligament tissue engineering. Nevertheless, these approaches still demonstrate limitations, including the necessity of larger-scale animal models to ease future clinical translation and comprehensive assessment of tissue response after implantation.

Guided bone regeneration using a hydrophilic membrane made of unsintered hydroxyapatite and poly(L-lactic acid) in a rat bone-defect model

The effectiveness of a previously developed unsintered hydroxyapatite (uHA) and poly(L-lactic acid) (PLLA) hydrophilic membrane as a resorbable barrier for guided bone regeneration (GBR) was evaluated. Critical-size 8-mm diameter bone defects were surgically generated in the parietal bones of 24 12-week-old male Wistar rats, which were then divided into three groups in which either a uHA/PLLA or a collagen membrane or no membrane (control) was placed onto the bone defect. Following sacrifice of the animals 2 or 4 weeks after surgery, bone defects were examined using microcomputed tomography and histological analysis. Bone mineral density, bone mineral content, and relative bone growth area values 2 or 4 weeks after surgery were highest in the uHA/PLLA group. Four weeks after surgery, the relative bone growth area in the uHA/PLLA group was larger than that in the collagen group. The resorbable uHA/PLLA membrane is thus potentially effective for GBR.

Current approaches to the problem of carrier selection for limbal stem cells cultivation in the treatment of limbal stem cell deficiency

Diseases and damages of the ocular surface are one of the common causes of decreased vision and blindness. Dysfunction or death of limbal epithelial stem cells (LESC) plays an important role in the development of pathological processes in these conditions, which leads to the development of the limbal stem cell deficiency (LSCD). Currently, one of the methods to treat LSCD is a transplantation of cultured ex vivo LESC. The most common carriers for the cultivation of LESC in the world is the amniotic membrane (AM). However, the presence of certain disadvantages in using AM for the cultivation of LESC compels to search new types of carriers made from biological or synthetic materials. In this review, we have analyzed various types of carriers: collagen, fibrin, chitosan with gelatin, silk fibroin, keratin, contact lenses, polylactide-co-glycolide, polycaprolactone, and the possibility of their application as carriers for the LESC cultivation followed by transplantation on the ocular surface is considered.

Collagen/chitosan/hyaluronic acid - based injectable hydrogels for tissue engineering applications - design, physicochemical and biological characterization

Studies on synthesis, physico-chemical and biological properties of novel biomimetic materials, potentially useful as injectable hydrogels are presented. These materials are in situ prepared chemically crosslinked collagen/chitosan/hyaluronic acid-based hydrogels exhibiting potential for tissue regeneration. Optimization of hydrogels involved testing the effect of various concentration of crosslinking agent (genipin) as well as different ratios of biopolymers used on their properties. The changes in the content of hyaluronic acid and in the genipin concentration used have been shown to be crucial. Employing the highest concentration of crosslinking agent studied (20 mM) the hydrogels of compact structure, characterized by good mechanical properties and prolonged degradation profile can be obtained. Changing the HA content in sol mixture the hydrogel of various wettability; more or less hydrophilic when compared to pure collagen/chitosan hydrogels can be fabricated. The in vitro cell culture study has shown that the surface of the prepared materials ensures suitable biocompatibility. These hydrogels can support the proliferation and adhesion of MG-63 cell line as it was demonstrated using Alamar Blue assay and SEM observations. It is believed that the collagen/chitosan/hyaluronic acid hydrogels crosslinked with genipin are particularly promising materials for bone regeneration procedures, especially attractive for regeneration of small bone losses. This is the first paper in the litearature presenting results of studies on that type of biopolymeric injectable hydrogels chemically crosslinked with genipin.

Modulation of Macrophage Phenotype, Maturation, and Graft Integration through Chondroitin Sulfate Cross-Linking to Decellularized Cornea

Decellularized corneas obtained from other species have gained intense popularity in the field of tissue engineering due to its role to serve as an alternative to the limited availability of high-quality donor tissues. However, the decellularized cornea is found to evoke an immune response inspite of the removal of the cellular contents and antigens due to the distortion of the collagen fibrils that exposes certain antigenic sites, which often lead to graft rejection. Therefore, in this study we tested the hypothesis that cross-linking the decellularized corneas with chondroitin sulfate may help in restoring the distorted conformationation changes of fibrous matrix and thus help in reducing the occurrence of graft rejection. Cross-linking of the decellularized cornea with oxidized chondroitin sulfate was validated by ATR-FTIR analysis. An in vitro immune response study involving healthy monocytes and differentiated macrophages with their surface marker analysis by pHrodo red, Lysotracker red, ER tracker, and CD63, LAMP-2 antibodies confirmed that the cross-linked decellularized matrices elicited the least immune response compared to the decellularized ones. We implanted three sets of corneal scaffolds obtained from goat, i.e., native, decellularized, and decellularized corneas conjugated with chondroitin sulfate into the rabbit stroma. Histology analysis, three months after implantation into the rabbit corneal stromal region, confirmed the restoration of the collagen fibril conformation and the migration of cells to the implanted constructs, affirming proper graft integration. Hence we conclude that the chondroitin sulfate cross-linked decellularized corneal matrix may serve as an efficient alternative to the allograft and human cadaveric corneas.

Bioactivating Silicon (100) Surfaces with Novel UV Grafting of Cyclopropylamine for Promotion of Cell Adhesion

In this report, utraviolent (UV) photoionization of cyclopropylamine on silicon (100) hydride was employed to examine interfacing with three different epithelial cell types (MDA-MB 231, AGS and HEC1A). The cellular viability using this novel methodology had been quantified to evaluate the bioactivating potential of this ring-opening chemistry when compared to standardized controls (aminopropyltriethoxylamine, collagen and poly-L lysine). X-ray photospectroscopy (XPS) and atomic force microscopy (AFM) were used to characterize surface chemistry composition, while cell viability and confocal microscopy after 24 h of incubation were performed. Based on the results acquired from this novel ring-opening metastasis process, the promotion of cell adhesion and viability was found to be higher using this chemistry when compared to other conventional control groups, even for the collagen coating, without any observable issues of cytotoxicity.

Hydrogen bonds autonomously powered gelatin methacrylate hydrogels with super-elasticity, self-heal and underwater self-adhesion for sutureless skin and stomach surgery and E-skin

Interface-interaction induced self-healing and self-adhesive are a gem-like attribute inspired by our Mother Nature. Biocompatible gelatin methacrylate (GelMA) hydrogels exhibit tunable mechanical properties which are favorable in biomedical applications. However, it is difficult to integrate high stiffness, super-elasticity, large deformability and self-healing property together. Here, we report a GelMA-based double-network (DN) hydrogel with above properties by utilizing tannic acid (TA) as a multi-functional H-bond provider. We first investigated the morphological and mechanical properties' changes of GelMA over different TA's concentrations and treating times. In comparison to pristine GelMA hydrogel (10% w/v), the GelMA-TA hydrogels presented significant increase in ultimate stress (4.3-fold), compressive modulus (2.5-fold), and especially in elongation (6-fold). Adhesion properties of GelMA-TA can be tuned by TA and have been proven to be water-resistant. To test gels' feasibility in vivo, we applied GelMA-TA gels to close skin wound and gastric incision without suture. The results indicated the gels had the capabilities of promoting wound healing with superior tissue restoration and minimal tissue adhesion. Furthermore, integrated with carbon nanotubes, the GelMA-TA-carbon nanotube gel was an alternative self-healing electric skin with strain-sensitive conductivity. This work demonstrated a strategy to yield mechanically strong hydrogel adhesives for innovative biomedical applications.

Squid type II collagen as a novel biomaterial: Isolation, characterization, immunogenicity and relieving effect on degenerative osteoarthritis via inhibiting STAT1 signaling in pro-inflammatory macrophages

Collagen from marine organisms has a broad prospect in biomedical field, yet the knowledge on marine-derived type II collagen is rare. Herein, a novel type II collagen was successfully isolated from squid cartilage for the first time. After being characterized, the immunogenicity of squid type II collagen (SCII) was evaluated and compared with that of bovine type II collagen (BCII). Then investigations were further conducted for the impacts of SCII on pro-inflammatory macrophages and macrophage chemotaxis. The degenerative osteoarthritis (OA) -relieving effects of SCII were explored using OA rat model in vivo. Our results demonstrated that the isolated SCII maintained triple-superhelical structure of native collagen with high purity. Different from BCII, SCII presented no immunogenicity since it neither induced abnormal proliferation of lymphocytes in vitro nor changed the basic levels of IgM, IgG, anti-type II collagen IgG and CD4⁺/CD8⁺ lymphocytes ratio in vivo. Additionally, SCII also exerted prominent anti-inflammatory effects. SCII significantly reduced the production of pro-inflammatory cytokines by enhancing the activity of TCPTP and subsequently prompting the dephosphorylation of p-STAT1 in pro-inflammatory macrophages. Besides, it indirectly prevented hypertrophic changes of chondrocytes, and markedly impeded chemotaxis of macrophages. Moreover, inflammation condition in OA rats was significantly alleviated under treatment with SCII. These data suggested that the newly developed SCII could not only avoid the immunogenic risks of collagen derived from terrestrial animals, but more importantly, provide new choice for the control and treatment of OA.

Harnessing macrophage-mediated degradation of gelatin microspheres for spatiotemporal control of BMP2 release

Biomaterials-based approaches to harnessing the immune and inflammatory responses to potentiate wound healing hold important promise. Bone fracture healing is characterized by an acute inflammatory phase, followed by a transition to a regenerative and repair phase. In this study, we developed genipin-crosslinked gelatin microspheres designed to be preferentially degraded by inflammatory (M1) macrophages. Highly crosslinked (>90%) microspheres allowed efficient incorporation of bioactive bone morphogenetic protein 2 (BMP2), a potent stimulator of osteogenesis in progenitor cells, via electrostatic interactions. Release of BMP2 was directly correlated with degradation of the gelatin matrix. Exposure of microspheres to polarized murine macrophages showed that degradation was significantly higher in the presence of M1 macrophages, relative to alternatively activated (M2) macrophages and unpolarized controls. Microsphere degradation in the presence of non-inflammatory cells resulted in very low degradation rates. The expression of matrix metalloproteinases (MMPs) and tissue inhibitors of MMP (TIMPs) by macrophages were consistent with the observed phenotype-dependent degradation rates. Indirect co-culture of BMP2-loaded microspheres and macrophages with isolated adipose-derived mesenchymal stem cells (MSC) showed that M1 macrophages produced the strongest osteogenic response, comparable to direct supplementation of the culture medium with BMP2. Controlled release systems that are synchronized with the inflammatory response have the potential to provide better spatiotemporal control of growth factor delivery and therefore may improve the outcomes of recalcitrant wounds.

Interplay between stiffness and degradation of architectured gelatin hydrogels leads to differential modulation of chondrogenesis in vitro and in vivo

The limited capacity of cartilage to heal large lesions through endogenous mechanisms has led to extensive effort to develop materials to facilitate chondrogenesis. Although physical-chemical properties of biomaterials have been shown to impact in vitro chondrogenesis, whether these findings are translatable in vivo is subject of debate. Herein, architectured 3D hydrogel scaffolds (ArcGel) (produced by crosslinking gelatin with ethyl lysine diisocyanate (LDI)) were used as a model system to investigate the interplay between scaffold mechanical properties and degradation on matrix deposition by human articular chondrocytes (HAC) from healthy donors in vitro and in vivo. Using ArcGel scaffolds of different tensile and shear modulus, and degradation behavior; in this study, we compared the fate of ex vivo engineered ArcGels-chondrocytes constructs, i.e. the traditional tissue engineering approach, with thede novoformation of cartilaginous tissue in HAC laden ArcGels in an ectopic nude mouse model. While the softer and fast degrading ArcGel (LNCO3) was more efficient at promoting chondrogenic differentiation in vitro, upon ectopic implantation, the stiffer and slow degrading ArcGel (LNCO8) was superior in maintaining chondrogenic phenotype in HAC and retention of cartilaginous matrix. Furthermore, surprisingly the de novo formation of cartilage tissue was promoted only in LNCO8. Since HAC cultured for only three days in the LNCO8 environment showed upregulation of hypoxia-associated genes, this suggests a potential role for hypoxia in the observed in vivo outcomes. In summary, this study sheds light on how immediate environment (in vivo versus in vitro) can significantly impact the outcomes of cell-laden biomaterials.

STATEMENT OF SIGNIFICANCE

In this study, 3D architectured hydrogels (ArcGels) with different mechanical and biodegradation properties were investigated for their potential to promote formation of cartilaginous matrix by human articular chondrocytes in vitro and in vivo. Two paradigms were explored (i) ex vivo engineering followed by in vivo implantation in ectopic site of nude mice and (ii) short in vitro culture (3 days) followed by implantation to induce de novo cartilage formation. Softer and fast degrading ArcGel were better at promoting chondrogenesis in vitro, while stiffer and slow degrading ArcGel were strikingly superior in both maintaining chondrogenesis in vivo and inducing de novo formation of cartilage. Our findings highlight the importance of the interplay between scaffold mechanics and degradation in chondrogenesis.

Cryostructuring of polymer systems. 47. Preparation of wide porous gelatin-based cryostructurates in sterilizing organic media and assessment of the suitability of thus formed matrices as spongy scaffolds for 3D cell culturing

New gelatin-based cryostructurates have been elaborated and tested as scaffolds for three-dimensional (3D) cell culturing. Scaffold preparation included dissolution of Type A gelatin in dimethylsulfoxide, freezing of such solution, cryoextraction of crystalline phase with cold ethanol, cross-linking of gelatin with carbodiimide in ethanol medium, treatment of the matrix with ethanolic solution of Tris and tanning of the matrix with formaldehyde dissolved in ethanol. The use of organic media during all the preparation stages ensured the sterility of the scaffolds. The matrices thus prepared were seeded with human adipose tissue multipotent mesenchymal stromal cells to confirm the biocompatibility of scaffolds and their possibility to provide necessary environment for the cell growth and differentiation. The cells attached onto the surface of the pore walls, proliferated and differentiated into osteogenic and adipogenic lineages. These results demonstrate that gelatin-based cryostructurates prepared in the sterility ensuring organic media can be used as scaffolds for tissue engineering purposes.

Electrospun Gelatin⁻Chondroitin Sulfate Scaffolds Loaded with Platelet Lysate Promote Immature Cardiomyocyte Proliferation

The aim of the present work was the development of heart patches based on gelatin (G) and chondroitin sulfate (CS) to be used as implants to improve heart recovery after corrective surgery for critical congenital heart defects (CHD). Patches were prepared by means of electrospinning to obtain nanofibrous scaffolds and they were loaded with platelet lysate (PL) as a source of growth factors to further enhance the repair process. Scaffolds were characterized for morphology and mechanical properties and for the capability to support in vitro adhesion and proliferation of dermal fibroblasts in order to assess the system’s general biocompatibility. Adhesion and proliferation of endothelial cells and cardiac cells (cardiomyocytes and cardiac fibroblasts from rat fetuses) onto PL-loaded patches was evaluated. Patches presented good elasticity and high stiffness suitable for in vivo adaptation to heart contraction. CS improved adhesion and proliferation of dermal fibroblasts, as proof of their biocompatibility. Moreover, they enhanced the adhesion and proliferation of endothelial cells, a crucial mediator of cardiac repair. Cell adhesion and proliferation could be related to elastic properties, which could favor cell motility. The presence of platelet lysate and CS was crucial for the adhesion and proliferation of cardiac cells and, in particular, of cardiomyocytes: G/CS scaffold embedded with PL appeared to selectively promote proliferation in cardiomyocytes but not cardiac fibroblasts. In conclusion, G/CS scaffold seems to be a promising system to assist myocardial-repair processes in young patient, preserving cardiomyocyte viability and preventing cardiac fibroblast proliferation, likely reducing subsequent uncontrolled collagen deposition by fibroblasts following repair.

An experimental toolbox for characterization of mammalian collagen type I in biological specimens

Collagen type I is the most abundant extracellular matrix protein, and collagen type I supramolecular assemblies (e.g., tissue grafts, biomaterials and cell-assembled systems) are used extensively in tissue engineering and regenerative medicine. Many studies, for convenience or economic reasons, do not accurately determine collagen type I purity, concentration, solubility and extent of cross-linking in biological specimens, frequently resulting in erroneous conclusions. In this protocol, we describe solubility; normal, reduced and delayed (interrupted) SDS-PAGE; hydroxyproline; Sircol collagen and Pierce BCA protein; denaturation temperature; ninhydrin/trinitrobenzene sulfonic acid; and collagenase assays and assess them in a diverse range of biological samples (e.g., tissue samples; purified solutions or lyophilized materials; 3D scaffolds, such as sponges and hydrogels; and cell media and layers). Collectively, the described protocols provide a comprehensive, yet fast and readily implemented, toolbox for collagen type I characterization in any biological specimen.

Recombinant collagen scaffolds as substrates for human neural stem/progenitor cells

Adhesion to the microenvironment profoundly affects stem cell functions, including proliferation and differentiation, and understanding the interaction of stem cells with the microenvironment is important for controlling their behavior. In this study, we investigated the effects of the integrin binding epitopes GFOGER and IKVAV (natively present in collagen I and laminin, respectively) on human neural stem/progenitor cells (hNSPCs). To test the specificity of these epitopes, GFOGER or IKVAV were placed within the context of recombinant triple-helical collagen III engineered to be devoid of native integrin binding sites. HNSPCs adhered to collagen that presented GFOGER as the sole integrin-binding site, but not to IKVAV-containing collagen. For the GFOGER-containing collagens, antibodies against the β1 integrin subunit prevented cellular adhesion, antibodies against the α1 subunit reduced cell adhesion, and antibodies against α2 or α3 subunits had no significant effect. These results indicate that hNSPCs primarily interact with GFOGER through the α1β1 integrin heterodimer. These GFOGER-presenting collagen variants also supported differentiation of hNSPCs into neurons and astrocytes. Our findings show, for the first time, that hNSPCs can bind to the GFOGER sequence, and they provide motivation to develop hydrogels formed from recombinant collagen variants as a cell delivery scaffold. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 1363-1372, 2018.

Advances in Protein-Based Materials: From Origin to Novel Biomaterials

Biomaterials play a very important role in biomedicine and tissue engineering where they directly affect the cellular activities and their microenvironment . Myriad of techniques have been employed to fabricate a vast number natural, artificial and recombinant polymer s in order to harness these biomaterials in tissue regene ration , drug delivery and various other applications. Despite of tremendous efforts made in this field during last few decades, advanced and new generation biomaterials are still lacking. Protein based biomaterials have emerged as an attractive alternatives due to their intrinsic properties like cell to cell interaction , structural support and cellular communications. Several protein based biomaterials like, collagen , keratin , elastin , silk protein and more recently recombinant protein s are being utilized in a number of biomedical and biotechnological processes. These protein-based biomaterials have enormous capabilities, which can completely revolutionize the biomaterial world. In this review, we address an up-to date review on the novel, protein-based biomaterials used for biomedical field including tissue engineering, medical science, regenerative medicine as well as drug delivery. Further, we have also emphasized the novel fabrication techniques associated with protein-based materials and implication of these biomaterials in the domain of biomedical engineering .

Programing stimuli-responsiveness of gelatin with electron beams: basic effects and development of a hydration-controlled biocompatible demonstrator

Biomimetic materials with programmable stimuli responsiveness constitute a highly attractive material class for building bioactuators, sensors and active control elements in future biomedical applications. With this background, we demonstrate how energetic electron beams can be utilized to construct tailored stimuli responsive actuators for biomedical applications. Composed of collagen-derived gelatin, they reveal a mechanical response to hydration and changes in pH-value and ion concentration, while maintaining their excellent biocompatibility and biodegradability. While this is explicitly demonstrated by systematic characterizing an electron-beam synthesized gelatin-based actuator of cantilever geometry, the underlying materials processes are also discussed, based on the fundamental physical and chemical principles. When applied within classical electron beam lithography systems, these findings pave the way for a novel class of highly versatile integrated bioactuators from micro- to macroscales.

Bioinspiring Chondrosia reniformis (Nardo, 1847) Collagen-Based Hydrogel: A New Extraction Method to Obtain a Sticky and Self-Healing Collagenous Material

Collagen is a natural and abundant polymer that serves multiple functions in both invertebrates and vertebrates. As collagen is the natural scaffolding for cells, collagen-based hydrogels are regarded as ideal materials for tissue engineering applications since they can mimic the natural cellular microenvironment. Chondrosia reniformis is a marine demosponge particularly rich in collagen, characterized by the presence of labile interfibrillar crosslinks similarly to those described in the mutable collagenous tissues (MCTs) of echinoderms. As a result single fibrils can be isolated using calcium-chelating and disulphide-reducing chemicals. In the present work we firstly describe a new extraction method that directly produces a highly hydrated hydrogel with interesting self-healing properties. The materials obtained were then biochemically and rheologically characterized. Our investigation has shown that the developed extraction procedure is able to extract collagen as well as other proteins and Glycosaminoglycans (GAG)-like molecules that give the collagenous hydrogel interesting and new rheological properties when compared to other described collagenous materials. The present work motivates further in-depth investigations towards the development of a new class of injectable collagenous hydrogels with tailored specifications.

Shotgun label-free proteomic analysis for identification of proteins in HaCaT human skin keratinocytes regulated by the administration of collagen from soft-shelled turtle

Soft‐shelled turtles (Pelodiscus sinensis) are widely distributed in some Asian countries, and we previously reported that soft‐shelled turtle tissue could be a useful material for collagen. In the present study, we performed shotgun liquid chromatography (LC)/mass spectrometry (MS)‐based global proteomic analysis of collagen‐administered human keratinocytes to examine the functional effects of collagen from soft‐shelled turtle on human skin. Using a semiquantitative method based on spectral counting, we were able to successfully identify 187 proteins with expression levels that were changed more than twofold by the administration of collagen from soft‐shelled turtle. Based on Gene Ontology analysis, the functions of these proteins closely correlated with cell–cell adhesion. In addition, epithelial–mesenchymal transition was induced by the administration of collagen from soft‐shelled turtle through the down‐regulation of E‐cadherin expression. Moreover, collagen‐administered keratinocytes significantly facilitated wound healing compared with nontreated cells in an in vitro scratch wound healing assay. These findings suggest that collagen from soft‐shelled turtle provides significant benefits for skin wound healing and may be a useful material for pharmaceuticals and medical care products. © 2017 The Authors Journal of Biomedical Materials Research Part B: Applied Biomaterials Published by Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 2403–2413, 2018.

Identification of immunogenic proteins of the cysticercoid of Hymenolepis diminuta

Background

A wide range of molecules are used by tapeworm metacestodes to establish successful infection in the hostile environment of the host. Reports indicating the proteins in the cestode-host interactions are limited predominantly to taeniids, with no previous data available for non-taeniid species. A non-taeniid, Hymenolepis diminuta, represents one of the most important model species in cestode biology and exhibits an exceptional developmental plasticity in its life-cycle, which involves two phylogenetically distant hosts, arthropod and vertebrate.

Results

We identified H. diminuta cysticercoid proteins that were recognized by sera of H. diminuta-infected rats using two-dimensional gel electrophoresis (2DE), 2D-immunoblotting, and LC-MS/MS mass spectrometry. Proteomic analysis of 42 antigenic spots revealed 70 proteins. The largest number belonged to structural proteins and to the heat-shock protein (HSP) family. These results show a number of the antigenic proteins of the cysticercoid stage, which were present already in the insect host prior to contact with the mammal host. These are the first parasite antigens that the mammal host encounters after the infection, therefore they may represent some of the molecules important in host-parasite interactions at the early stage of infection.

Conclusions

These results could help in understanding how H. diminuta and other cestodes adapt to their diverse and complex parasitic life-cycles and show universal molecules used among diverse groups of cestodes to escape the host response to infection.

Electronic supplementary material

The online version of this article (10.1186/s13071-017-2519-4) contains supplementary material, which is available to authorized users.

Comparison between Ologen implant and different concentrations of Mitomycin C as an adjuvant to trabeculectomy surgery

CONTEXT:

Trabeculectomy is the most common surgical procedure for treatment of glaucoma. To improve success rates, adjuvants were utilized as Mitomycin C (MMC) and Ologen implant.

AIMS:

This study aims to establish efficacy and safety of Ologen implant versus MMC in trabeculectomy.

SETTING AND DESIGN:

A prospective, comparative clinical study was conducted at the Department of Ophthalmology, Assiut University, between December 2014 and April 2016.

SUBJECTS AND METHODS:

Patients with primary open-angle glaucoma (OAG), primary narrow-angle glaucoma and secondary OAG were assigned equally to trabeculectomy with Ologen, 0.4 mg/mL or 0.2 mg/mL MMC. The study outcome measures were reduction in intra-ocular pressure (IOP), success rates, survival analysis, and rate of complications.

STATISTICAL ANALYSIS USED:

SPSS software Version 17.0 (SPSS, Inc., IL, USA) was utilized.

RESULTS:

Thirty eyes were included in the study. Mean baseline IOP in Ologen, MMC 0.4 and MMC 0.2 groups were 27.43 ± 2.97, 28.4 ± 3.24, and 27.56 ± 2.69 mmHg, respectively. At week 24 follow-up, mean IOP in Ologen, MMC 0.4 and MMC 0.2 groups were 18.55 ± 3.18, 16.2 ± 3.22, and 16.93 ± 3.04 mmHg, respectively. No significant inter-group difference was noticed at any visits. Complete success was achieved in 10%, 40%, and 30%, whereas incomplete success in 70%, 50%, and 60%, respectively in Ologen, MMC 0.4 and MMC 0.2 groups. No treatment group difference was reported by Kaplan–Meier analysis. Shallow anterior chamber occurred more in Ologen and MMC 0.4 groups. A single case of serous choroidal effusion had occurred in MMC 0.4 group.

CONCLUSION:

Ologen implant is a promising alternative to MMC for improving the success rate of trabeculectomy.

Acetic acid and pepsin result in high yield, high purity and low macrophage response collagen for biomedical applications

Collagen based devices are frequently associated with foreign body response. Although several pre- (e.g. species, state of animal, tissue) and post- (e.g. cross-linking, scaffold architecture) extraction method factors have a profound effect on foreign body response, little is known about which and how during the extraction process factors mediate foreign body response. In this study, we assessed the influence of acetic acid and hydrochloric acid and the utilisation or not of pepsin or salt precipitation during collagen extraction on the yield, purity, free amines, denaturation temperature, resistance to collagenase degradation and macrophage response. Acetic acid/pepsin extracted collagen exhibited the highest yield, purity and free amine content and the lowest denaturation temperature. No differences in resistance to collagenase digestion were detected between the groups. Although all treatments exhibited similar macrophage morphology comprised of round cells (M1 phenotype), elongated cells (M2 phenotype) and cell aggregates (foreign body response), significantly more elongated cells were observed on HC films. Although no differences in metabolic activity were observed between the groups, the DNA concentration was significantly lower for the hydrochloric acid treatments. Further, cytokine analysis revealed that hydrochloric acid treatments induced significantly higher IL-1β and TNF-α release with respect to acetic acid treatments. Salt precipitation did not influence the parameters assessed. Collectively, these data suggest that during the collagen extraction process variables should also be monitored as, evidently, they affect the physicochemical and biological properties of collagen preparations.

Functional and Biomimetic Materials for Engineering of the Three-Dimensional Cell Microenvironment

The cell microenvironment has emerged as a key determinant of cell behavior and function in development, physiology, and pathophysiology. The extracellular matrix (ECM) within the cell microenvironment serves not only as a structural foundation for cells but also as a source of three-dimensional (3D) biochemical and biophysical cues that trigger and regulate cell behaviors. Increasing evidence suggests that the 3D character of the microenvironment is required for development of many critical cell responses observed in vivo, fueling a surge in the development of functional and biomimetic materials for engineering the 3D cell microenvironment. Progress in the design of such materials has improved control of cell behaviors in 3D and advanced the fields of tissue regeneration, in vitro tissue models, large-scale cell differentiation, immunotherapy, and gene therapy. However, the field is still in its infancy, and discoveries about the nature of cell-microenvironment interactions continue to overturn much early progress in the field. Key challenges continue to be dissecting the roles of chemistry, structure, mechanics, and electrophysiology in the cell microenvironment, and understanding and harnessing the roles of periodicity and drift in these factors. This review encapsulates where recent advances appear to leave the ever-shifting state of the art, and it highlights areas in which substantial potential and uncertainty remain.

Recent advances in cell-laden 3D bioprinting: materials, technologies and applications

Fabrication of 3D scaffolds with patient-specific designs, high structural and component complexity, and rapid on-demand production at a low-cost by printing technique has attracted ever-increasing interests in tissue engineering. Cell-laden 3D bioprinting offers good prospects for future organ transplantation. Compared with nonbiological 3D printing, cell-laden 3D bioprinting involves more complex factors, including the choice of printing materials, the strategy of gelling, cell viability and technical challenges. Although cell-populated 3D bioprinting has so many complex factors, it has proven to be a useful and exciting tool with wide potential applications in regenerative medicine to generate a variety of transplantable tissues. In this review, we first overview the bioprinting materials, gelling strategies and some major applications of cell-laden 3D bioprinting, with main focus on the recent advances and current challenges of the field. Finally, we propose some future directions of the cell-populated 3D bioprinting in tissue engineering and regenerative medicine.

[Formula: see text]

In this review, we first overview the bioprinting materials, gelling strategies and some major applications of cell-populated 3D bioprinting, with main focus on the recent advances and current challenges of the field. Finally, we propose some future directions of the cell-laden 3D bioprinting in tissue engineering and regenerative medicine.

Biomaterials for Craniofacial Bone Regeneration

Functional reconstruction of craniofacial defects is a major clinical challenge in craniofacial sciences. The advent of biomaterials is a potential alternative to standard autologous/allogenic grafting procedures to achieve clinically successful bone regeneration. This article discusses various classes of biomaterials currently used in craniofacial reconstruction. Also reviewed are clinical applications of biomaterials as delivery agents for sustained release of stem cells, genes, and growth factors. Recent promising advancements in 3D printing and bioprinting techniques that seem to be promising for future clinical treatments for craniofacial reconstruction are covered. Relevant topics in the bone regeneration literature exemplifying the potential of biomaterials to repair bone defects are highlighted.

Toward the development of biomimetic injectable and macroporous biohydrogels for regenerative medicine

Repairing or replacing damaged human tissues has been the ambitious goal of regenerative medicine for over 25years. One promising approach is the use of hydrated three-dimensional scaffolds, known as hydrogels, which have had good results repairing tissues in pre-clinical trials. Benefiting from breakthrough advances in the field of biology, and more particularly regarding cell/matrix interactions, these hydrogels are now designed to recapitulate some of the fundamental cues of native environments to drive the local tissue regeneration. We highlight the key parameters that are required for the development of smart and biomimetic hydrogels. We also review the wide variety of polymers, crosslinking methods, and manufacturing processes that have been developed over the years. Of particular interest is the emergence of supramolecular chemistries, allowing for the development of highly functional and reversible biohydrogels. Moreover, advances in computer assisted design and three-dimensional printing have revolutionized the production of macroporous hydrogels and allowed for more complex designs than ever before with the opportunity to develop fully reconstituted organs. Today, the field of biohydrogels for regenerative medicine is a prolific area of research with applications for most bodily tissues. On top of these applications, injectable hydrogels and macroporous hydrogels (foams) were found to be the most successful. While commonly associated with cells or biologics as drug delivery systems to increase therapeutic outcomes, they are steadily being used in the emerging fields of organs-on-chip and hydrogel-assisted cell therapy. To highlight these advances, we review some of the recent developments that have been achieved for the regeneration of tissues, focusing on the articular cartilage, bone, cardiac, and neural tissues. These biohydrogels are associated with improved cartilage and bone defects regeneration, reduced left ventricular dilation upon myocardial infarction and display promising results repairing neural lesions. Combining the benefits from each of these areas reviewed above, we envision that an injectable biohydrogel foam loaded with either stem cells or their secretome is the most promising hydrogel solution to trigger tissue regeneration. A paradigm shift is occurring where the combined efforts of fundamental and applied sciences head toward the development of hydrogels restoring tissue functions, serving as drug screening platforms or recreating complex organs.

A highly adhesive and naturally derived sealant

Conventional surgical techniques to seal and repair defects in highly stressed elastic tissues are insufficient. Therefore, this study aimed to engineer an inexpensive, highly adhesive, biocompatible, and biodegradable sealant based on a modified and naturally derived biopolymer, gelatin methacryloyl (GelMA). We tuned the degree of gelatin modification, prepolymer concentration, photoinitiator concentration, and crosslinking conditions to optimize the physical properties and adhesion of the photocrosslinked GelMA sealants. Following ASTM standard tests that target wound closure strength, shear resistance, and burst pressure, GelMA sealant was shown to exhibit adhesive properties that were superior to clinically used fibrin- and poly(ethylene glycol)-based glues. Chronic in vivo experiments in small as well as translational large animal models proved GelMA to effectively seal large lung leakages without the need for sutures or staples, presenting improved performance as compared to fibrin glue, poly(ethylene glycol) glue and sutures only. Furthermore, high biocompatibility of GelMA sealant was observed, as evidenced by a low inflammatory host response and fast in vivo degradation while allowing for adequate wound healing at the same time. Combining these results with the low costs, ease of synthesis and application of the material, GelMA sealant is envisioned to be commercialized not only as a sealant to stop air leakages, but also as a biocompatible and biodegradable hydrogel to support lung tissue regeneration.

Removing Cross-Linked Telopeptides Enhances the Production of Low-Molecular-Weight Collagen Peptides from Spent Hens

The low-molecular-weight (LMW) peptides derived from collagen have shown a potential for various nutritional and pharmaceutical applications. However, production of LMW peptides from vertebrate collagen remains a challenge. Herein, we report a new method to produce LMW collagen peptides using pepsin pretreatment that removed cross-linked telopeptides in collagen molecules. After the pretreatment, the proportion of LMW collagen peptides (<1.4 kDa) that were obtained from pepsin-soluble collagen increased to 32.59% compared to heat-soluble collagen peptides (16.10%). Fourier transform infrared spectroscopy results indicated that telopeptide cleavage retained the triple-helical conformation of collagen. Liquid chromatography-tandem mass spectrometry analysis suggested that Gly-X-Y (X is often proline, while Y is either hydroxyproline or hydroxylysine) repeats were not the main factors that hindered the enzymatic hydrolysis of collagen molecules. However, cross-link quantification demonstrated that trivalent cross-links that included pyridinolines and pyrroles were the primary obstacles to producing small peptides from collagen of spent hens. This study demonstrated for the first time that removing cross-linked telopeptides could enhance the production of LMW peptides from spent hen collagen, which is also of interest to manufacturers who produce LMW collagen peptides from other vertebrate animals, such as bovids and porcids.

Influence of direct or indirect contact for the cytotoxicity and blood compatibility of spider silk

Spider silk became one of the most-researched biomaterials in the last years due to its unique mechanical strength and most favourable chemical composition for tissue engineering purposes. However, standardized analysis of cytocompatibility is missing. Therefore, the aim of this study was to investigate hemolysis, cytotoxicity of native spider silk as well as influences on the cell culture medium. Changes of cell culture medium composition, osmolarity as well as glucose and lactate content were determined via ELISA measurement. Possible hemolysis and cytotoxicity in vitro of spider silk were performed via measurement of hemoglobin release of human red blood cells or relative metabolic activity of L929 fibroblasts, respectively, according to international standard procedures. In ELISA measurement, no significant changes in medium composition could be found in this study. Spider silk was not hemolytic in direct and indirect testing. However, a borderline cytotoxicity according to definitions was found in indirect cytotoxicity testing. Nevertheless, in direct cytotoxicity testing, relative metabolic activity measurement revealed that spider silk is not cytotoxic under these conditions. This is the first study to conduct standardized tests regarding cytotoxicity and hemolysis of native spider silk, which might be considered inert in cell culture. As neither hemolysis nor cytotoxicity was found in direct contact in standardized procedures, safety in biomedical applications may be assumed. The indirect cytotoxicity seems to play a minor role in vivo. However, a borderline toxicity was revealed, suggesting potential leachables not yet identified. Displays one of the weaving frames used in this study after seeding with the single drop technique described herein.

In vivo comparison of jellyfish and bovine collagen sponges as prototype medical devices

Jellyfish have emerged as a source of next generation collagen that is an attractive alternative to existing sources, such as bovine and porcine, due to a plentiful supply and providing a safer source through lack of bovine spongiform encephalopathy (BSE) transmission risk and potential viral vectors, both of which could be transmitted to humans. Here we compare collagen implantable sponges derived for the first time from the Rhizostoma pulmo jellyfish. A further novelty for the research was that there was a comparison for sponges that were either uncrosslinked or crosslinked using 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC), and an assessment on how this affected resorption, as well as their biocompatibility compared to bovine type I collagen sponges. The scaffolds were prepared and examined using sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS PAGE) and scanning electron microscopy (SEM). The samples were implanted in adult male Wistar rats for in vivo experimentation. Both crosslinked and uncrosslinked jellyfish collagen sponges showed a significant reduction in histopathology scores over the course of the study, whereas the bovine collagen sponge scores were not significantly reduced. Both jellyfish collagen sponges and the bovine sponge were tolerated well by the hosts, and a recovery was visible in all samples, suggesting that R. pulmo jellyfish-derived collagen could offer compelling biocompatibility with wound healing applications. We also demonstrate that noncrosslinked samples could be safer with better resorption times than crosslinked samples. © 2017 The Authors Journal of Biomedical Materials Research Part B: Applied Biomaterials Published by Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 1524-1533, 2018.

Atelocollagen Enhances the Healing of Rotator Cuff Tendon in Rabbit Model

BACKGROUND

Failure of rotator cuff healing is a common complication despite the rapid development of surgical repair techniques for the torn rotator cuff.

PURPOSE

To verify the effect of atelocollagen on tendon-to-bone healing in the rabbit supraspinatus tendon compared with conventional cuff repair.

STUDY DESIGN

Controlled laboratory study.

METHODS

A tear of the supraspinatus tendon was created and repaired in 46 New Zealand White rabbits. They were then randomly allocated into 2 groups (23 rabbits per group; 15 for histological and 8 for biomechanical test). In the experimental group, patch-type atelocollagen was implanted between bone and tendon during repair; in the control group, the torn tendon was repaired without atelocollagen. Each opposite shoulder served as a sham (tendon was exposed only). Histological evaluation was performed at 4, 8, and 12 weeks. Biomechanical tensile strength was tested 12 weeks after surgery.

RESULTS

Histological evaluation scores of the experimental group (4.0 ± 1.0) were significantly superior to those of the control group (7.7 ± 2.7) at 12 weeks ( P = .005). The load to failure was significantly higher in the experimental group (51.4 ± 3.9 N) than in the control group (36.4 ± 5.9 N) ( P = .001).

CONCLUSION

Histological and biomechanical studies demonstrated better results in the experimental group using atelocollagen in a rabbit model of the supraspinatus tendon tear.

CLINICAL RELEVANCE

Atelocollagen patch could be used in the cuff repair site to enhance healing.

Lamination of microfibrous PLGA fabric by electrospinning a layer of collagen-hydroxyapatite composite nanofibers for bone tissue engineering

BACKGROUND

To mimic the muscle inspired cells adhesion through proteins secretion, the lamination of collagen-hydroxyapatite nanorod (nHA) composite nanofibers has been carried out successfully on polydopamine (PDA)-coated microfibrous polylactide-co-glycolide (PLGA) fabrics. The lamination of collagen-hydroxyapatite composite nanofibers on polydopamine-coated microfibrous PLGA fabrics was carried through electrospinning the solution of collagen containing L-glutamic acid-grafted hydroxyapatite nanorods (nHA-GA) at a flow rate of 1.5 mL/h and an applied voltage of 15 kV.

RESULTS

In comparison to pristine PLGA, dopamine-coated PLGA and collagen-hydroxyapatite composite nanofiber lamination has produced more wettable surfaces and surface wettability is found to higher with dopamine-coated PLGA fabrics then pristine PLGA. The SEM micrographs have clearly indicated that the lamination of polydopamine-coated PLGA fabric with collagen-hydroxyapatite composite nanofibers has shown increased adhesion of MC3T3E1 cells in comparison to pristine PLGA fabrics.

CONCLUSION

The results of these studies have clearly demonstrated that collagen-nHA composites fibers may be used to create bioactive 3D scaffolds using PLGA as an architectural support agent.

BBP-Functionalized Biomimetic Nanofibrous Scaffold Can Capture BMP2 and Promote Osteogenic Differentiation

Bone morphogenetic proteins (BMPs, e.g., BMP2 and 7) are potent mediators for bone repair, however, their clinical use has been limited by their safety and cost-effectiveness. Therefore, innovative strategies that can improve the efficacy of BMPs, and thereby, use a lower dose of exogenous BMPs are highly desired. Inspired by the natural interaction between extracellular matrix (ECM) and growth factors, we hypothesize that bone matrix-mimicking nanofibrous scaffold functionalized with BMP binding moieties can selectively capture and stabilize BMPs, and thereby, promote BMP-induced osteogenic differentiation. To test our hypothesis, a gelatin nanofibrous scaffold was fabricated using thermally induced phase separation together with a porogen leaching technique (TIPS&P) and functionalized by a BMP-binding peptide (BBP) through cross-linking. Our data indicated that BBP decoration largely improved the BMP2 binding and retention capacity of the nanofibrous scaffolds without compromising their macro/microstructure and mechanical properties. Importantly, the BBP-functionalized gelatin scaffolds were able to significantly promote BMP2-induced osteogenic differentiation. Moreover, BBP alone was able to significantly stimulate endogenous BMP2 expression and improve osteogenic differentiation. Compared to other affinity-based drug delivery strategies, e.g., heparin and antibody-mediated growth factor delivering techniques, we expect BBP-functionalized scaffolds will be a safer, more feasible and selective strategy for endogenous BMP stimulating and binding. Therefore, our data suggests a promising application of using the BBP-decorated gelatin nanofibrous scaffold to stimulate/capture BMPs and promote endogenous bone formation in situ in contrast to relying on the administration of high doses of exogenous BMPs and transplantation of cells.

Collagen from the Marine Sponges Axinella cannabina and Suberites carnosus: Isolation and Morphological, Biochemical, and Biophysical Characterization

In search of alternative and safer sources of collagen for biomedical applications, the marine demosponges Axinella cannabina and Suberites carnosus, collected from the Aegean and the Ionian Seas, respectively, were comparatively studied for their insoluble collagen, intercellular collagen, and spongin-like collagen content. The isolated collagenous materials were morphologically, physicochemically, and biophysically characterized. Using scanning electron microscopy and transmission electron microscopy the fibrous morphology of the isolated collagens was confirmed, whereas the amino acid analysis, in conjunction with infrared spectroscopy studies, verified the characteristic for the collagen amino acid profile and its secondary structure. Furthermore, the isoelectric point and thermal behavior were determined by titration and differential scanning calorimetry, in combination with circular dichroism spectroscopic studies, respectively.

Hydrolysates of Fish Skin Collagen: An Opportunity for Valorizing Fish Industry Byproducts

During fish processing operations, such as skinning and filleting, the removal of collagen-containing materials can account for up to 30% of the total fish byproducts. Collagen is the main structural protein in skin, representing up to 70% of dry weight depending on the species, age and season. It has a wide range of applications including cosmetic, pharmaceutical, food industry, and medical. In the present work, collagen was obtained by pepsin extraction from the skin of two species of teleost and two species of chondrychtyes with yields varying between 14.16% and 61.17%. The storage conditions of the skins appear to influence these collagen extractions yields. Pepsin soluble collagen (PSC) was enzymatically hydrolyzed and the resultant hydrolysates were ultrafiltrated and characterized. Electrophoretic patterns showed the typical composition of type I collagen, with denaturation temperatures ranged between 23 °C and 33 °C. In terms of antioxidant capacity, results revealed significant intraspecific differences between hydrolysates, retentate, and permeate fractions when using β-Carotene and DPPH methods and also showed interspecies differences between those fractions when using DPPH and ABTS methods. Under controlled conditions, PSC hydrolysates from Prionace glauca, Scyliorhinus canicula, Xiphias gladius, and Thunnus albacares provide a valuable source of peptides with antioxidant capacities constituting a feasible way to efficiently upgrade fish skin biomass.