Alpha-helical coiled coils and bundles: how to design an alpha-helical protein

The C-terminal portion of the fibrinogen-binding protein of Streptococcus equi subsp. equi contains extensive alpha-helical coiled-coil structure and contributes to thermal stability

The major cell wall-associated protein of the equine pathogen Streptococcus equi subsp. equi is a fibrinogen-binding protein (FgBP) which binds horse fibrinogen and equine IgG-Fc avidly through residues located in the N-terminal half and central regions of the molecule, respectively. The molecule is a major virulence factor for the organism and displays protective potential. In the present study, we use circular dichroism spectroscopy to investigate the secondary structure of the protein and show through the analysis of a panel of recombinant FgBP truncates that the C-terminal portion of FgBP contains an extensive alpha-helical coiled-coil structure that contributes to the thermal stability of the molecule.

Engineering nutritious proteins: improvement of stability in the designer protein MB-1 via introduction of disulfide bridges

Protein design is currently used for the creation of new proteins with desirable traits. In this laboratory the focus has been on the synthesis of proteins with high essential amino acid content having potential applications in animal nutrition. One of the limitations faced in this endeavor is achieving stable proteins despite a highly biased amino acid content. Reported here are the synthesis and characterization of two disulfide-bridged mutants derived from the MB-1 designer protein. Both mutants outperformed their parent protein MB-1 with their bridge formed, as shown by circular dichroism, size exclusion chromatography, thermal denaturation, and proteolytic degradation experiments. When the disulfide bridges were cleaved, the mutants' behavior changed: the mutants significantly unfolded, suggesting that the introduction of Cys residues was deleterious to MB-1-folding. In an attempt to compensate for the mutations used, a Tyr62-Trp mutation was performed, leading to an increase in bulk and hydrophobicity in the core. The Trp-containing disulfide-bridged mutants did not behave as well as the original MB-1Trp, suggesting that position 62 might not be adequate for a compensatory mutation.

Generalized Crick equations for modeling noncanonical coiled coils

Crick envisaged the alpha-helical coiled coil to result from systematic bending of an alpha-helix such that every seventh residue was structurally equivalent, and he derived equations for the coordinates of the backbone atoms. Crick's predictions were vindicated experimentally and coiled-coil sequences were shown to have hydrophobic residues alternately spaced 3 and 4 residues apart. Nonetheless, in some coiled coils such canonical heptad repeats are interrupted by inserts of 3 or 4 residues generating decad and hendecad motifs. The supercoiling of the coiled coils varies with the sequence pattern, being left- or right-handed in purely heptad-based or hendecad-based motifs, respectively. To model coiled coils with a mixture of motifs, we describe how Crick's equations can be modified for cases where the pitch is not constant. Using the analogy of the bending of a beam, we took the tilt angle to change linearly with distance along the major helix and the pitch of a motif to be affected by neighboring motifs depending on the rigidity of the alpha-helical strands. We tested our approach by fitting the two-, three-, and four-stranded noncanonical coiled coils of GrpE, hemagglutinin, and tetrabrachion. The backbone atoms of the model and crystal structures agreed with root mean square deviations of <1.1 A.

Disease-causing mutations in cardiac troponin T: identification of a critical tropomyosin-binding region

Fifteen percent of the mutations causing familial hypertrophic cardiomyopathy are in the troponin T gene. Most mutations are clustered between residues 79 and 179, a region known to bind to tropomyosin at the C-terminus near the complex between the N- and C-termini. Nine mutations were introduced into a troponin T fragment, Gly-hcTnT(70-170), that is soluble, alpha-helical, binds to tropomyosin, promotes the binding of tropomyosin to actin, and stabilizes an overlap complex of N-terminal and C-terminal tropomyosin peptides. Mutations between residues 92 and 110 (Arg92Leu, Arg92Gln, Arg92Trp, Arg94Leu, Ala104Val, and Phe110Ile) impair tropomyosin-dependent functions of troponin T. Except for Ala104Val, these mutants bound less strongly to a tropomyosin affinity column and were less able to stabilize the TM overlap complex, effects that were correlated with increased stability of the troponin T, measured using circular dichroism. All were less effective in promoting the binding of tropomyosin to actin. Mutations within residues 92-110 may cause disease because of altered interaction with tropomyosin at the overlap region, critical for cooperative actin binding and regulatory function. A model for a five-chained coiled-coil for troponin T in the tropomyosin overlap complex is presented. Mutations outside the region (Ile79Asn, Delta 160Glu, and Glu163Lys) functioned normally and must cause disease by another mechanism.

Evaluation of the energetic contribution of interhelical Coulombic interactions for coiled coil helix orientation specificity

Coiled coils are formed by two or more alpha-helices that align in a parallel or an antiparallel relative orientation. The factors that determine a preference for a given relative helix orientation are incompletely understood. The helix orientation preference for the designed coiled coil, Acid-a1-Base-a1, was measured previously. This model system therefore provides a means for the experimental determination of the energetic contribution of a variety of interactions to helix orientation specificity. The antiparallel preference for Acid-a1-Base-a1 is imparted by a single buried polar interaction. Interhelical Coulombic interactions between residues at the e and g positions have been proposed to influence helix orientation preference. In the Acid-a1-Base-a1 heterodimer, potentially attractive Coulombic interactions are expected in both orientations. To determine the energetic consequences of Coulombic interactions for helix orientation preference, we have positioned a single charged residue in each peptide such that exclusively favorable interhelical Coulombic interactions can occur only in the parallel orientation. In contrast, two potentially repulsive interactions are expected in the antiparallel orientation. Because the buried polar interaction can occur only in the antiparallel orientation, interhelical Coulombic interactions favor the parallel orientation and the potential to form a buried polar interaction favors the antiparallel orientation. We find no clear preference for an antiparallel orientation in the resulting heterodimer, Acid-Ke-Base-Eg, suggesting that interhelical Coulombic interactions and a buried polar interaction are of approximately equal importance for helix orientation specificity. Stability measurements indicate that maintenance of all favorable electrostatic interactions and/or avoidance of two potentially repulsive interactions contributes approximately 2.1 kcal/mol to helix orientation preference.

Effect of surface charges on the rates of intermolecular electron-transfer between de novo designed metalloproteins

A de novo designed coiled-coil metalloprotein was prepared that uses electrostatic interactions to control both its conformational and bimolecular electron-transfer properties. The title protein exists as a coiled-coil heterodimer of the [Ru(trpy)(bpy)-KK(37-mer)] and [Ru(NH(3))(5)-EE(37-mer)] polypeptides which is formed by interhelix electrostatic attractions. Circular dichroism studies show that the electrostatic heterodimer has K(d) = 0.19 +/- 0.03 microM and is 96% helical at high concentrations. Intercomplex electron-transfer reactions were studied that involve the [Ru(NH(3))(5)-H21](2+) electron-donor and the [Ru(trpy)(bpy)-H21](3+) electron-acceptor belonging to different electrostatic dimers. An important feature of the designed metalloprotein is its two cationic redox centers embedded within protein surfaces having opposite charge. Thus, the Ru(II)(NH(3))(5)-H21 site was placed on the surface of one chain of the coiled-coil which was made to be positively charged, and the Ru(III)(trpy)(bpy)-H21 site was placed on the surface of the other chain which was negatively charged. The rates of intermolecular electron-transfer increased from (1.9 +/- 0.4) x 10(7) M(-1) s(-1) to (3.7 +/- 0.5) x 10(7) M(-1) s(-1) as the ionic strength was increased from 0.01 to 0.20 M. This indicates that the electrostatic repulsion between the ruthenium centers dominates the kinetics of these reactions. However, the presence of the oppositely charged protein surfaces in the coiled-coils creates an electrostatic recognition domain that substantially ameliorates the effects of this repulsion.

Crystal structure of the central region of bovine fibrinogen (E5 fragment) at 1.4-A resolution

The high-resolution crystal structure of the N-terminal central region of bovine fibrinogen (a 35-kDa E(5) fragment) reveals a remarkable dimeric design. The two halves of the molecule bond together at the center in an extensive molecular "handshake" by using both disulfide linkages and noncovalent contacts. On one face of the fragment, the Aalpha and Bbeta chains from the two monomers form a funnel-shaped domain with an unusual hydrophobic cavity; here, on each of the two outer sides there appears to be a binding site for thrombin. On the opposite face, the N-terminal gamma chains fold into a separate domain. Despite the chemical identity of the two halves of fibrinogen, an unusual pair of adjacent disulfide bonds locally constrain the two gamma chains to adopt different conformations. The striking asymmetry of this domain may promote the known supercoiling of the protofibrils in fibrin. This information on the detailed topology of the E(5) fragment permits the construction of a more detailed model than previously possible for the critical trimolecular junction of the protofibril in fibrin.

Beta-helix model for the filamentous haemagglutinin adhesin of Bordetella pertussis and related bacterial secretory proteins

Bordetella pertussis establishes infection by attaching to epithelial cells of the respiratory tract. One of its adhesins is filamentous haemagglutinin (FHA), a 500-A-long secreted protein that is rich in beta-structure and contains two regions, R1 and R2, of tandem 19-residue repeats. Two models have been proposed in which the central shaft is (i) a hairpin made up of a pairing of two long antiparallel beta-sheets; or (ii) a beta-helix in which the polypeptide chain is coiled to form three long parallel beta-sheets. We have analysed a truncated variant of FHA by electron microscopy (negative staining, shadowing and scanning transmission electron microscopy of unstained specimens): these observations support the latter model. Further support comes from detailed sequence analysis and molecular modelling studies. We applied a profile search method to the sequences adjacent to and between R1 and R2 and found additional "covert" copies of the same motifs that may be recognized in overt form in the R1 and R2 sequence repeats. Their total number is sufficient to support the tenet of the beta-helix model that the shaft domain--a 350 A rod--should consist of a continuous run of these motifs, apart from loop inserts. The N-terminus, which does not contain such repeats, was found to be weakly homologous to cyclodextrin transferase, a protein of known immunoglobulin-like structure. Drawing on crystal structures of known beta-helical proteins, we developed structural models of the coil motifs putatively formed by the R1 and R2 repeats. Finally, we applied the same profile search method to the sequence database and found several other proteins--all large secreted proteins of bacterial provenance--that have similar repeats and probably also similar structures.

D(n)-symmetrical tertiary templates for the design of tubular proteins

Antiparallel helical bundles are found in a wide range of proteins. Often, four-helical bundles form tube-like structures, with binding sites for substrates or cofactors near their centers. For example, a transmembrane four-helical bundle in cytochrome bc(1) binds a pair of porphyrins in an elongated central cavity running down the center of the structure. Antiparallel helical barrels with larger diameters are found in the crystal structures of TolC and DSD, which form antiparallel 12-helical and six-helical bundles, respectively. The backbone geometries of the helical bundles of cytochrome bc(1), TolC, and DSD are well described using a simple D(n)-symmetrical model with only eight adjustable parameters. This parameterization provides an excellent starting point for construction of minimal models of these proteins as well as the de novo design of proteins with novel functions.

Dimer interface of transmembrane domains for neu/erbB-2 receptor dimerization and transforming activation: a model revealed by molecular dynamics simulations

The specific point mutation Val-->Glu664 within the transmembrane domain of the neu/erbB-2 receptor is associated with increased receptor dimerization and increased receptor tyrosine kinase activity resulting in malignant transformation of cells. It is well established that Glu and residues in proximity are necessary for receptor dimerization but many studies suggest that other intramembrane constraints, not yet elucidated, are determinant for transformation. In this work, we investigated dimer models both to understand the structural role of the Glu mutation in the transmembrane domain association and to determine helix-helix contacts required for oncogenic transformation. Different types of helix-helix association based on data resulting from Cys mutational studies of the full wild receptor and spectroscopic data of transmembrane neu peptides have been explored by molecular dynamics simulations. The study leads to propose a model for the dimeric association of the transmembrane domains of the oncogenic neu receptor showing left-handed interactions of the two helices stabilized by symmetrical hydrogen bonding interactions involving the Glu side chain on one helix and the facing carbonyl of Ala661 on the second helix. Contacting residues observed in the symmetric interface explain the transforming activity or the non transforming activity of many neu mutants. Moreover the left-handed coiled coil structure is fully consistent with recent results proving the role of rotational linkage of the transmembrane domain with the kinase domain. Comparison between the predicted dimer model and those presumed from experiments strongly suggests helix flexibility in the extracellular juxtamembrane region.

Deciphering the design of the tropomyosin molecule

The crystal structure at 2.0-A resolution of an 81-residue N-terminal fragment of muscle alpha-tropomyosin reveals a parallel two-stranded alpha-helical coiled-coil structure with a remarkable core. The high alanine content of the molecule is clustered into short regions where the local 2-fold symmetry is broken by a small (approximately 1.2-A) axial staggering of the helices. The joining of these regions with neighboring segments, where the helices are in axial register, gives rise to specific bends in the molecular axis. We observe such bends to be widely distributed in two-stranded alpha-helical coiled-coil proteins. This asymmetric design in a dimer of identical (or highly similar) sequences allows the tropomyosin molecule to adopt multiple bent conformations. The seven alanine clusters in the core of the complete molecule (which spans seven monomers of the actin helix) promote the semiflexible winding of the tropomyosin filament necessary for its regulatory role in muscle contraction.

Engineering of the hydrophobic core of an alpha-helical coiled coil

The amino acid sequence that forms the alpha-helical coiled coil structure has a representative heptad repeat denoted by defgabc, according to their positions. Although the a and d positions are usually occupied by hydrophobic residues, hydrophilic residues at these positions sometimes play important roles in natural proteins. We have manipulated a few amino acids at the a and d positions of a de novo designed trimeric coiled coil to confer new functions to the peptides. The IZ peptide, which has four heptad repeats and forms a parallel triple-stranded coiled coil, has Ile at all of the a and d positions. We show three examples: (1) the substitution of one Ile at either the a or d position with Glu caused the peptide to become pH sensitive; (2) the metal ion induced alpha-helical bundles were formed by substitutions with two His residues at the d and a positions for a medium metal ion, and with one Cys residue at the a position for a soft metal ion; and (3) the AAB-type heterotrimeric alpha-helical bundle formation was accomplished by a combination of Ala and Trp residues at the a positions of different peptide chains. Furthermore, we applied these procedures to prepare an ABC-type heterotrimeric alpha-helical bundle and a metal ion-induced heterotrimeric alpha-helical bundle.

The interacting domains of three MutL heterodimers in man: hMLH1 interacts with 36 homologous amino acid residues within hMLH3, hPMS1 and hPMS2

In human cells, hMLH1, hMLH3, hPMS1 and hPMS2 are four recognised and distinctive homologues of MutL, an essential component of the bacterial DNA mismatch repair (MMR) system. The hMLH1 protein forms three different heterodimers with one of the other MutL homologues. As a first step towards functional analysis of these molecules, we determined the interacting domains of each heterodimer and tried to understand their common features. Using a yeast two-hybrid assay, we show that these MutL homologues can form heterodimers by interacting with the same amino acid residues of hMLH1, residues 492-742. In contrast, three hMLH1 partners, hMLH3, hPMS1 and hPMS2 contain the 36 homologous amino acid residues that interact strongly with hMLH1. Contrary to the previous studies, these homologous residues reside at the N-terminal regions of three subdomains conserved in MutL homologues in many species. Interestingly, these residues in hPMS2 and hMLH3 may form coiled-coil structures as predicted by the MULTICOIL program. Furthermore, we show that there is competition for the interacting domain in hMLH1 among the three other MutL homologues. Therefore, the quantitative balance of these three MutL heterodimers may be important in their functions.

Structural models of human apolipoprotein A-I: a critical analysis and review

Human apolipoprotein (apo) A-I has been the subject of intense investigation because of its well-documented anti-atherogenic properties. About 70% of the protein found in high density lipoprotein complexes is apo A-I, a molecule that contains a series of highly homologous amphipathic alpha-helices. A number of significant experimental observations have allowed increasing sophisticated structural models for both the lipid-bound and the lipid-free forms of the apo A-I molecule to be tested critically. It seems clear, for example, that interactions between amphipathic domains in apo A-I may be crucial to understanding the dynamic nature of the molecule and the pathways by which the lipid-free molecule binds to lipid, both in a discoidal and a spherical particle. The state of the art of these structural studies is discussed and placed in context with current models and concepts of the physiological role of apo A-I and high-density lipoprotein in atherosclerosis and lipid metabolism.

Energetics of coiled coil folding: the nature of the transition states

Coiled coils are simple models for studying the association of two polypeptide chains to form a folded protein. Previous work has shown that the folding of a coiled coil can be described by a two-state transition between two unfolded monomeric peptide chains and a folded coiled coil dimer. Here we report the thermodynamic activation parameters for the folding and unfolding of two unrelated coiled coils: C62GCN4 and A(2). C62GCN4 corresponds to the 62 C-terminal residues of yeast transcription factor GCN4. The peptide forms a dimeric coiled coil through its 33 C-terminal residues. A(2) is a designed 30-residue dimeric coiled coil whose folding is induced by low pH [Dürr, E., Jelesarov, I., and Bosshard, H. R. (1999) Biochemistry 38, 870-880]. Folding and unfolding were assessed under identical native buffer conditions so that the microscopic reversibility applied and the transition state was the same for folding and unfolding. The time course of folding was followed from the self-quenching of a C-terminal fluorescent label (Texas Red). The overall folding of both peptides is enthalpy-driven and opposed by a loss of entropy. The main energetic changes occur after the system has passed the transition state. In the folding of C62GCN4, only 10-20% of the heat capacity change is attained between the monomeric state and the dimeric transition state. For coiled coil A(2), the fractional heat capacity change preceding the transition state is 30-40%. The results indicate that the activated states of folding of coiled coils are not well structured and differ considerably from the folded coiled coil conformation. These findings are in agreement with a rate-limiting transition state in which the coiled coil helices and the hydrophobic coiled coil interface are poorly developed.

A de novo designed peptide ligase: a mechanistic investigation

A 33-residue de novo designed peptide ligase is reported which catalyzes the template-directed condensation of suitably activated short peptides with catalytic efficiencies in excess of 10(5) ([k(cat)/K(m)]/k(uncat)). The ligase peptide, derived from natural and designed alpha-helical coiled-coil proteins, presents a surface for substrate assembly via formation of a hydrophobic core at the peptide interface. Charged residues flanking the core provide additional binding specificity through electrostatic complementarity. Addition of the template to an equimolar fragment solution results in up to 4100-fold increases in initial reaction rates. Dramatic decreases in efficiency upon mutation of charged residues or increase in ionic strength establishes the importance of electrostatic recognition to ligase efficiency. Although most of the increase in reaction efficiency is due to entropic gain from binding of substrates in close proximity, mechanistic studies with altered substrates demonstrate that the system is highly sensitive to precise ordering at the point of ligation. Taken together these results represent the first example of a peptide catalyst with designed substrate binding sites which can significantly accelerate a bimolecular reaction and support the general viability of alpha-helical protein assemblies in artificial enzyme design.

Importance of internal regions and the overall length of tropomyosin for actin binding and regulatory function

Tropomyosin (Tm) binds along actin filaments, one molecule spanning four to seven actin monomers, depending on the isoform. Periodic repeats in the sequence have been proposed to correspond to actin binding sites. To learn the functional importance of length and the internal periods we made a series of progressively shorter Tms, deleting from two up to six of the internal periods from rat striated alpha-TM (dAc2--3, dAc2--4, dAc3--5, dAc2--5, dAc2--6, dAc1.5--6.5). Recombinant Tms (unacetylated) were expressed in Escherichia coli. Tropomyosins that are four or more periods long (dAc2--3, dAc2--4, and dAc3--5) bound well to F-actin with troponin (Tn). dAc2--5 bound weakly (with EGTA) and binding of shorter mutants was undetectable in any condition. Myosin S1-induced binding of Tm to actin in the tight Tm-binding "open" state did not correlate with actin binding. dAc3--5 and dAc2--5 did not bind to actin even when the filament was saturated with S1. In contrast, dAc2--3 and dAc2--4 did, like wild-type-Tm, requiring about 3 mol of S1/mol of Tm for half-maximal binding. The results show the critical importance of period 5 (residues 166--207) for myosin S1-induced binding. The Tms that bound to actin (dAc2--3, dAc2--4, and dAc3--5) all fully inhibited the actomyosin ATPase (+Tn) in EGTA. In the presence of Ca(2+), relief of inhibition by these Tms was incomplete. We conclude (1) four or more actin periods are required for Tm to bind to actin with reasonable affinity and (2) that the structural requirements of Tm for the transition of the regulated filament from the blocked-to-closed/open (relief of inhibition by Ca(2+)) and the closed-to-open states (strong Tm binding to actin-S1) are different.

MAT1-modulated CAK activity regulates cell cycle G(1) exit

The cyclin-dependent kinase (CDK)-activating kinase (CAK) is involved in cell cycle control, transcription, and DNA repair (E. A. Nigg, Curr. Opin. Cell. Biol. 8:312-317, 1996). However, the mechanisms of how CAK is integrated into these signaling pathways remain unknown. We previously demonstrated that abrogation of MAT1 (ménage à trois 1), an assembly factor and targeting subunit of CAK, induces G(1) arrest (L. Wu, P. Chen, J. J. Hwang, L. W. Barsky, K. I. Weinberg, A. Jong, and V. A. Starnes, J. Biol. Chem. 274:5564-5572, 1999). This result led us to investigate how deregulation of CAK by MAT1 abrogation affects the cell cycle G(1) exit, a process that is regulated most closely by phosphorylation of retinoblastoma tumor suppressor protein (pRb). Using mammalian cellular models that undergo G(1) arrest evoked by antisense MAT1 abrogation, we found that deregulation of CAK inhibits pRb phosphorylation and cyclin E expression, CAK phosphorylation of pRb is MAT1 dose dependent but cyclin D1/CDK4 independent, and MAT1 interacts with pRb. These results suggest that CAK is involved in the regulation of cell cycle G(1) exit while MAT1-modulated CAK formation and CAK phosphorylation of pRb may determine the cell cycle specificity of CAK in G(1) progression.

Alphavirus nucleocapsid protein contains a putative coiled coil alpha-helix important for core assembly

The alphavirus nucleocapsid core is formed through the energetic contributions of multiple noncovalent interactions mediated by the capsid protein. This protein consists of a poorly conserved N-terminal region of unknown function and a C-terminal conserved autoprotease domain with a major role in virion formation. In this study, an 18-amino-acid conserved region, predicted to fold into an alpha-helix (helix I) and embedded in a low-complexity sequence enriched with basic and Pro residues, has been identified in the N-terminal region of the alphavirus capsid proteins. In Sindbis virus, helix I spans residues 38 to 55 and contains three conserved leucine residues, L38, L45, and L52, conforming to the heptad amino acid organization evident in leucine zipper proteins. Helix I consists of an N-terminally truncated heptad and two complete heptad repeats with beta-branched residues and conserved leucine residues occupying the a and d positions of the helix, respectively. Complete or partial deletion of helix I, or single-site substitutions at the conserved leucine residues (L45 and L52), caused a significant decrease in virus replication. The mutant viruses were more sensitive to elevated temperature than wild-type virus. These mutant viruses also failed to accumulate cores in the cytoplasm of infected cells, although they did not have defects in protein translation or processing. Analysis of these mutants using an in vitro assembly system indicated that the majority were defective in core particle assembly. Furthermore, mutant proteins showed a trans-dominant negative phenotype in in vitro assembly reactions involving mutant and wild-type proteins. We propose that helix I plays a central role in the assembly of nucleocapsid cores through coiled coil interactions. These interactions may stabilize subviral intermediates formed through the interactions of the C-terminal domain of the capsid protein and the genomic RNA and contribute to the stability of the virion.

Design of a minimal protein oligomerization domain by a structural approach

Because of the simplicity and regularity of the alpha-helical coiled coil relative to other structural motifs, it can be conveniently used to clarify the molecular interactions responsible for protein folding and stability. Here we describe the de novo design and characterization of a two heptad-repeat peptide stabilized by a complex network of inter- and intrahelical salt bridges. Circular dichroism spectroscopy and analytical ultracentrifugation show that this peptide is highly alpha-helical and 100% dimeric tinder physiological buffer conditions. Interestingly, the peptide was shown to switch its oligomerization state from a dimer to a trimer upon increasing ionic strength. The correctness of the rational design principles used here is supported by details of the atomic structure of the peptide deduced from X-ray crystallography. The structure of the peptide shows that it is not a molten globule but assumes a unique, native-like conformation. This de novo peptide thus represents an attractive model system for the design of a molecular recognition system.

Recombinant adenovirus vectors with knobless fibers for targeted gene transfer

Adenoviral vector systems for gene therapy can be much improved by targeting vectors to specific cell types. This requires both the complete ablation of native adenovirus tropism and the introduction of a novel binding affinity in the viral capsid. We reasoned that these requirements could be fulfilled by deleting the entire knob domain of the adenovirus fiber protein and replacing it with two distinct moieties that provide a trimerization function for the knobless fiber and specific binding to the target cell, respectively. To test this concept, we constructed adenoviral vectors carrying knobless fibers comprising the alpha-helix trimerization domain from MoMuLV envelope glycoprotein. Two mimic targeting ligands, a Myc-epitope and a 6His-tag, were attached via a flexible linker peptide. The targeted knobless fiber molecules were properly expressed and imported into the nucleus of adenovirus packaging cells, where they were incorporated as functional trimers into the adenovirus capsid. Both ligands were exposed on the surface of the virion and were available for specific binding to their target molecules. Moreover, the knobless fibers mediated gene delivery into cells displaying receptors for the coupled ligand. Hence, these knobless fibers are prototype substrates for versatile addition of targeting ligands to generate truly targeted adenoviruses.

The MAT1 cyclin-dependent kinase-activating kinase (CAK) assembly/targeting factor interacts physically with the MCM7 DNA licensing factor

MAT1 (ménage à trois1) functions as an assembly/targeting factor of CAK (cyclin-dependent kinase-activating kinase). In a search for MAT1-interacting proteins using yeast two-hybrid system, MCM7 (minichromosome maintenance 7), a member of a family of DNA licensing factors, was identified. The physical interaction between MAT1 and MCM7 was confirmed in vivo in yeast cells and verified with in vitro protein binding assays. Further studies showed the RING-finger motif of MAT1 is not required for the interaction with MCM7, while the C-terminal domain of MAT1 is indispensable. Immunoprecipitation of MCM7 in human osteosarcoma MG63 cells demonstrated that MCM7 associates with the CAK complex in vivo.

Surface beta-strands in proteins: identification using an hydropathy technique

From a representative set of monomeric globular proteins with known three-dimensional structures, beta-strands with lengths > or = 5 amino acids have been identified and catalogued. By ascertaining the accessible surface areas of the constituent residues in these strands, and by checking whether the exposed/buried pattern is 80% or more similar to that in an idealized surface strand, a subset of structures can be delineated in which the beta-strands are all sited on the surface of the protein. The corresponding sequence data show that about 50% of the residues are apolar (Val, Ile, Leu, Phe, Tyr, Ala) and that the common occurrence of valine (14.3%), isoleucine (9.6%), and threonine (8.1%) is a characteristic feature. The frequencies of occurrence of those amino acids in the strands that face the aqueous environment and the interior have also been determined separately and show that most surface strands have a substructure of the form (apolar-X)(n), where X is approximately equally divided between apolar, charged, and hydrophilic residues. Using the frequency data thus obtained, allied with an algorithm to delineate potential surface beta-strands from characteristic hydropathy profiles, it is now possible to search through the sequences of proteins with unknown tertiary structures and make realistic predictions of the presence of this element of structure on the protein surface. In addition, new data are presented on the distribution of the various types of residues on the surface of proteins and in their interior. Significant differences were observed, not all of which have been identified previously. Furthermore, the distribution of the types of residue in a surface beta-strand was compared to that corresponding to the surfaces of all of the proteins in our database. Again, very characteristic differences were observed. These are helpful in recognizing the presence of surface beta-strands.

Coiled-coil trigger motifs in the 1B and 2B rod domain segments are required for the stability of keratin intermediate filaments

Many alpha-helical proteins that form two-chain coiled coils possess a 13-residue trigger motif that seems to be required for the stability of the coiled coil. However, as currently defined, the motif is absent from intermediate filament (IF) protein chains, which nevertheless form segmented two-chain coiled coils. In the present work, we have searched for and identified two regions in IF chains that are essential for the stability necessary for the formation of coiled-coil molecules and thus may function as trigger motifs. We made a series of point substitutions with the keratin 5/keratin 14 IF system. Combinations of the wild-type and mutant chains were assembled in vitro and in vivo, and the stabilities of two-chain (one-molecule) and two-molecule assemblies were examined with use of a urea disassembly assay. Our new data document that there is a region located between residues 100 and 113 of the 2B rod domain segment that is absolutely required for molecular stability and IF assembly. This potential trigger motif differs slightly from the consensus in having an Asp residue at position 4 (instead of a Glu) and a Thr residue at position 9 (instead of a charged residue), but there is an absolute requirement for a Glu residue at position 6. Because these 13 residues are highly conserved, it seems possible that this motif functions in all IF chains. Likewise, by testing keratin IF with substitutions in both chains, we identified a second potential trigger motif between residues 79 and 91 of the 1B rod domain segment, which may also be conserved in all IF chains. However, we were unable to find a trigger motif in the 1A rod domain segment. In addition, many other point substitutions had little detectable effect on IF assembly, except for the conserved Lys-23 residue of the 2B rod domain segment. Cross-linking and modeling studies revealed that Lys-23 may lie very close to Glu-106 when two molecules are aligned in the A(22) mode. Thus, the Glu-106 residue may have a dual role in IF structure: it may participate in trigger formation to afford special stability to the two-chain coiled-coil molecule, and it may participate in stabilization of the two-molecule hierarchical stage of IF structure.

Phototropism: a "simple" physiological response modulated by multiple interacting photosensory-response pathways

Phototropism is the process by which plants reorient growth of various organs, most notably stems, in response to lateral differences in light quantity and/or quality. The ubiquitous nature of the phototropic response in the plant kingdom implies that it provides some adaptive evolutionary advantage. Upon visual inspection it is tempting to surmise that phototropic curvatures result from a relatively simple growth response to a directional stimulus. However, detailed photophysiological, and more recently genetic and molecular, studies have demonstrated that phototropism is in fact regulated by complex interactions among several photosensory systems. At least two receptors, phototropin and a presently unidentified receptor, appear to mediate the primary photoreception of directional blue light cues in dark-grown plants. PhyB may also function as a primary receptor to detect lateral increases in far-red light in neighbor-avoidance responses of light-grown plants. Phytochromes (phyA and phyB at a minimum) also appear to function as secondary receptors to regulate adaptation processes that ultimately modulate the magnitude of curvature induced by primary photoperception. As a result of the interactions of these multiple photosensory systems plants are able to maximize the adaptive advantage of the phototropic response in ever changing light environments.

Social motility in Myxococcus xanthus requires FrzS, a protein with an extensive coiled-coil domain

Gliding motility in the developmental bacterium Myxococcus xanthus involves two genetically distinct motility systems, designated adventurous (A) and social (S). Directed motility responses, which facilitate both vegetative swarming and developmental aggregation, additionally require the 'frizzy' (Frz) signal transduction pathway. In this study, we have analysed a new gene (frzS), which is positioned upstream of the frzA-F operon. Insertion mutations in frzS caused both vegetative spreading and developmental defects, including 'frizzy' aggregates in the FB strain background. The 'frizzy' phenotype was previously considered to result only from defective directed motility responses. However, deletion of the frzS gene in an A-S+ motility background demonstrated that FrzS is a new component of the S-motility system, as the A-frzS double mutant was non-spreading (A-S-). Compared with known S-motility mutants, the frzS mutants appear similar to pilT mutants, in that both produce type IV pili, extracellular fibrils and lipopolysaccharide (LPS) O-antigen, and both agglutinate rapidly in a cohesion assay. The FrzS protein has an unusual domain composition for a bacterial protein. The N-terminal domain shows similarity to the receiver domains of the two-component response regulator proteins. The C-terminal domain is composed of up to 38 heptad repeats (a b c d e f g)38, in which residues at positions a and d are predominantly hydrophobic, whereas residues at positions e and g are predominantly charged. This periodic disposition of specific residues suggests that the domain forms a long coiled-coil structure, similar to those found in the alpha-fibrous proteins, such as myosin. Overexpression of this domain in Escherichia coli resulted in the formation of an unusual striated protein lattice that filled the cells. We speculate on the role that this novel protein could play in gliding motility.

Myotonic dystrophy protein kinase domains mediate localization, oligomerization, novel catalytic activity, and autoinhibition

Human myotonic dystrophy protein kinase (DMPK) is a member of a novel class of multidomain protein kinases that regulate cell size and shape in a variety of organisms. However, little is currently known about the general properties of DMPK including domain function, substrate specificity, and potential mechanisms of regulation. Two forms of the kinase are expressed in muscle, DMPK-1 and DMPK-2. We demonstrate that the larger DMPK-1 form (the primary translation product) is proteolytically cleaved near the carboxy terminus to generate the smaller DMPK-2 form. We further demonstrate that the coiled-coil domain is required for DMPK oligomerization; coiled-coil mediated oligomerization also correlated with enhanced catalytic activity. DMPK was found to exhibit a novel catalytic activity similar to, but distinct from, related protein kinases such as protein kinase C and A, and the Rho kinases. We observed that recombinant DMPK-1 exhibits low activity, whereas the activity of carboxy-terminally truncated DMPK is increased approximately 3-fold. The inhibitory activity of the full-length kinase was mapped to what appears to be a pseudosubstrate autoinhibitory domain at the extreme carboxy terminus of DMPK. To date, endogenous activators of DMPK are unknown; however, we observed that DMPK purified from cells exposed to the G protein activator GTP-gamma-S exhibited an approximately 2-fold increase in activity. These results suggest a general model of DMPK regulation with two main regulatory branches: short-term activation of the kinase in response to G protein second messengers and long-term activation as a result of proteolysis.

De novo design and structural characterization of proteins and metalloproteins

De novo protein design has recently emerged as an attractive approach for studying the structure and function of proteins. This approach critically tests our understanding of the principles of protein folding; only in de novo design must one truly confront the issue of how to specify a protein's fold and function. If we truly understand proteins, it should be possible to design receptors, enzymes, and ion channels from scratch. Further, as this understanding evolves and is further refined, it should be possible to design proteins and biomimetic polymers with properties unprecedented in nature.

The unusually stable coiled-coil domain of COMP exhibits cold and heat denaturation in 4-6 M guanidinium chloride

A high thermal stability is observed for the five-stranded alpha-helical coiled-coil domain of cartilage oligomeric matrix protein COMP. It does not unfold in non-denaturing buffer between 0 and 100 degrees C and thermal denaturation is only achieved at high concentrations of guanidinium chloride (4-6 M). In these solutions the protein structure is lost at decreasing (cold denaturation) and increasing temperatures (heat denaturation). In the cold denaturation region, the melting profile showed deviations from the theory of Privalov et al. [P.L. Privalov, V. Griko Yu, S. Venyaminov, V.P. Kutyshenko, Cold denaturation of myoglobin, J. Mol. Biol. 190 (1986) 487-498] probably due to deviations from a two-state mechanism. High thermal stability as well as cold and heat denaturation was also observed for a mutant of the coiled-coil domain of COMP in which glutamine 54 was replaced by isoleucine but it still forms pentamer. The melting temperatures in plain buffer for the heat denaturation of COMP coiled-coil domain and its mutant obtained by extrapolation to zero molar guanidinium chloride concentration are approximately 160 and 220 degrees C, respectively, which groups them among the most stable proteins.

Effects of side-chain characteristics on stability and oligomerization state of a de novo-designed model coiled-coil: 20 amino acid substitutions in position "d"

We describe the de novo design and biophysical characterization of a model coiled-coil protein in which we have systematically substituted 20 different amino acid residues in the central "d" position. The model protein consists of two identical 38 residue polypeptide chains covalently linked at their N termini via a disulfide bridge. The hydrophobic core contained Val and Ile residues at positions "a" and Leu residues at positions "d". This core allowed for the formation of both two-stranded and three-stranded coiled-coils in benign buffer, depending on the substitution at position "d". The structure of each analog was analyzed by CD spectroscopy and their relative stability determined by chemical denaturation using GdnHCI (all analogs denatured from the two-stranded state). The oligomeric state(s) was determined by high-performance size-exclusion chromatography and sedimentation equilibrium analysis in benign medium. Our results showed a thermodynamic stability order (in order of decreasing stability) of: Leu, Met, Ile, Tyr, Phe, Val, Gln, Ala, Trp, Asn, His, Thr, Lys, Ser, Asp, Glu, Arg, Orn, and Gly. The Pro analog prevented coiled-coil formation. The overall stability range was 7.4 kcal/mol from the lowest to the highest analog, indicating the importance of the hydrophobic core and the dramatic effect a single substitution in the core can have upon the stability of the protein fold. In general, the side-chain contribution to the level of stability correlated with side-chain hydrophobicity. Molecular modelling studies, however, showed that packing effects could explain deviations from a direct correlation. In regards to oligomerization state, eight analogs demonstrated the ability to populate exclusively one oligomerization state in benign buffer (0.1 M KCl, 0.05 M K(2)PO(4)(pH 7)). Ile and Val (the beta-branched residues) induced the three-stranded oligomerization state, whereas Tyr, Lys, Arg, Orn, Glu and Asp induced the two-stranded state. Asn, Gln, Ser, Ala, Gly, Phe, Leu, Met and Trp analogs were indiscriminate and populated two-stranded and three-stranded states. Comparison of these results with similar substitutions in position "a" highlights the positional effects of individual residues in defining the stability and numbers of polypeptide chains occurring in a coiled-coil structure. Overall, these results in conjunction with other work now generate a relative thermodynamic stability scale for 19 naturally occurring amino acid residues in either an "a" or "d" position of a two-stranded coiled-coil. Thus, these results will aid in the de novo design of new coiled-coil structures, a better understanding of their structure/function relationships and the design of algorithms to predict the presence of coiled-coils within native protein sequences.

Folding of a three-stranded coiled coil

Coiled coils consist of two or more amphipathic a-helices wrapped around each other to form a superhelical structure stabilized at the interhelical interface by hydrophobic residues spaced in a repeating 3-4 sequence pattern. Dimeric coiled coils have been shown to often form in a single step reaction in which association and folding of peptide chains are tightly coupled. Here, we ask whether such a simple folding mechanism may also apply to the formation of a three-stranded coiled coil. The designed 29-residue peptide LZ16A was shown previously to be in a concentration-dependent equilibrium between unfolded monomer (M), folded dimer (D), and folded trimer (T). We show by time-resolved fluorescence change experiments that folding of LZ16A to D and T can be described by 2M (k1)<==>(k(-1)) D and M + D (k2)<==>(k(-2)) T. The following rate constants were determined (25 degrees C, pH 7): k1 = 7.8 x 10(4) M(-1) s(-1), k(-1) = 0.015 s(-1), k2 = 6.5 x 10(5) M(-1) s(-1), and k(-2) = 1.1 s(-1). In a separate experiment, equilibrium binding constants were determined from the change with concentration of the far-ultraviolet circular dichroism spectrum of LZ16A and were in good agreement with the kinetic rate constants according to K(D) = k1/2k(-1) and K(T) = k2/k(-2). Furthermore, pulsed hydrogen-exchange experiments indicated that only unfolded M and folded D and T were significantly populated during folding. The results are compatible with a two-step reaction in which a subpopulation of association competent (e.g., partly helical) monomers associate to dimeric and trimeric coiled coils.

Two two-gene macronuclear chromosomes of the hypotrichous ciliates Oxytricha fallax and O. trifallax generated by alternative processing of the 81 locus

We describe the first know macronuclear chromosomes that carry more than one gene in hypotrichous ciliated protozoa. These 4.9- and 2.8-kbp chromosomes each consist almost exclusively of two protein-coding genes, which are conserved and transcribed. The two chromosomes share a common region that consists of a gene that is a member of the family of mitochondrial solute carrier genes (CR-MSC; [Williams and Herrick (1991): Nucleic Acids Res 19:4717-4724]. Each chromosome also carries another gene appended to its common region: The 4.9-kbp chromosome also carries a gene that encodes a protein that is rich in glutamine and charged amino acids and bears regions of heptad repeats characteristic of coiled-coils. Its function is unknown. The second gene of the 2.8 kbp chromosome is a mitochondrial solute carrier gene (LA-MSC); thus, the 2.8-kbp chromosomes consists of two mitochondrial solute carrier paralogs. Phylogenetic analysis indicates that the two genes were duplicated before ciliates diverged from the main eukaryotic lineage and were subsequently juxtaposed. The CR- and LA-MSC genes are each interrupted by three introns. The introns are not in homologous positions, suggesting that they may have originated from multiple group II intron transpositions. These chromosomes and their genes are encoded in the Oxytricha germline by the 81 locus. This locus is alternatively processed to generate a nested set of three macronuclear chromosomes, the 4.9- and 2.8-kbp chromosomes and a third (1.6 kbp) which consists almost exclusively of the shared common gene, CR-MSC. Such alternative processing is common in macronuclear development of O. fallax [Cartinhour and Herrick (1984): Mol Cell Biol 4:931-938]. Possible functions for alternative processing are considered; e.g., it may serve to physically link genes to allow co-regulation or co-replication by a common cis-acting sequence.

Core structure of the outer membrane lipoprotein from Escherichia coli at 1.9 A resolution

The outer membrane lipoprotein of the Escherichia coli cell envelope has characteristic lipid modifications at an amino-terminal cysteine and can exist in a form bound covalently to the peptidoglycan through a carboxyl-terminal lysine. The 56-residue polypeptide moiety of the lipoprotein, designated Lpp-56, folds into a stable, trimeric helical structure in aqueous solution. The 1.9 A resolution crystal structure of Lpp-56 comprises a parallel three-stranded coiled coil including a novel alanine-zipper unit and two helix-capping motifs. The amino-terminal motif forms a hydrogen-bonding network anchoring an umbrella-shaped fold. The carboxyl-terminal motif uses puckering of the tyrosine side-chains as a unique docking arrangement in helix termination. The structure provides an explanation for assembly and insertion of the lipoprotein molecules into the outer membrane of gram-negative bacteria and suggests a molecular target for antibacterial drug discovery.

Synthesis and NMR solution structure of an alpha-helical hairpin stapled with two disulfide bridges

Helical coiled-coils and bundles are some of the most common structural motifs found in proteins. Design and synthesis of alpha-helical motifs may provide interesting scaffolds that can be useful as host structures to display functional sites, thus allowing the engineering of novel functional miniproteins. We have synthesized a 38-amino acid peptide, alpha2p8, encompassing the alpha-helical hairpin present in the structure of p8MTCP1, as an alpha-helical scaffold particularly promising for its stability and permissiveness of sequence mutations. The three-dimensional structure of this peptide has been solved using homonuclear two-dimensional NMR techniques at 600 MHz. After sequence specific assignment, a total of 285 distance and 29 dihedral restraints were collected. The solution structure of alpha2p8 is presented as a set of 30 DIANA structures, further refined by restrained molecular dynamics, using simulated annealing protocol with the AMBER force field. The RMSD values for the backbone and all heavy atoms are 0.65+/-0.25 and 1.51+/-0.21 A, respectively. Excised from its protein context, the alpha-hairpin keeps its native structure: an alpha-helical coiled-coil, similar to that found in superhelical structures, with two helices spanning residues 4-16 and 25-36, and linked by a short loop. This motif is stabilized by two interhelical disulfide bridges and several hydrophobic interactions at the helix interface, leaving most of its solvent-exposed surface available for mutation. This alpha-helical hairpin, easily amenable to synthetic chemistry and biological expression system, may represent a stable and versatile scaffold to display new functional sites and peptide libraries.

Nonpolar contributions to conformational specificity in assemblies of designed short helical peptides

A series of designed short helical peptides was used to study the effect of nonpolar interactions on conformational specificity. The consensus sequence was designed to obtain short helices (17 residues) and to minimize the presence of interhelical polar interactions. Furthermore, the sequence contained a heptad repeat (abcdefg), where positions a and d were occupied by hydrophobic residues Leu, Ile, or Val, and positions e and g were occupied by Ala. The peptides were named according to the identities of the residues in the adeg positions, respectively. The peptides llaa, liaa, ilaa, iiaa, ivaa, viaa, lvaa, vlaa, and vvaa were synthesized, and their characterization revealed marked differences in specificity. An experimental methodology was developed to study the nine peptides and their pairwise mixtures. These peptides and their mixtures formed a vast array of structural states, which may be classified as follows: helical tetramers and pentamers, soluble and insoluble helical aggregates, insoluble unstructured aggregates, and soluble unstructured monomers. The peptide liaa formed stable helical pentamers, and iiaa and vlaa formed stable helical tetramers. Disulfide cross-linking experiments indicated the presence of an antiparallel helix alignment in the helical pentamers and tetramers. Rates of amide proton exchange of the tetrameric form of vlaa were 10-fold slower than the calculated exchange rate for unfolded vlaa. In other work, the control of specificity has been attributed to polar interactions, especially buried polar interactions; this work demonstrated that subtle changes in the configuration of nonpolar interactions resulted in a large variation in the extent of conformational specificity of assemblies of designed short helical peptides. Thus, nonpolar interactions can have a significant effect on the conformational specificity of oligomeric short helices.

A distinct seven-residue trigger sequence is indispensable for proper coiled-coil formation of the human macrophage scavenger receptor oligomerization domain

We have recently identified a distinct 13-residue sequence pattern that occurs with limited sequence variations in many two-stranded coiled coils but not in trimers, tetramers, or pentamers. This coiled-coil trigger pattern was demonstrated to be indispensable for the assembly of the oligomerization domain of the actin-bundling protein cortexillin I from Dictyostelium discoideum and the leucine zipper domain of the yeast transcriptional activator GCN4. With the aim to extend our knowledge on trigger sequences we have investigated the human macrophage scavenger receptor type A oligomerization domain as a representative of three-stranded coiled coils. We prepared a variety of recombinant N- and C-terminal deletion mutants from the full-length oligomerization domain by heterologous gene expression in Escherichia coli and assessed their ability to form trimeric coiled-coil structures by circular dichroism spectroscopy and analytical ultracentrifugation. Deletion mapping identified a distinct seven-residue sequence that was absolutely required for proper coiled-coil formation, supporting our previous results that heptad repeats alone are not sufficient for oligomerization. The finding that all fragments containing this particular sequence exhibited similar thermal stabilities indicates primarily a stabilizing function of the coiled-coil trigger. Based on sequence similarity, we suggest that functionally related sites are present in other three-stranded coiled-coil proteins.

An enigmatic peptide ligation reaction: protease-catalyzed oligomerization of a native protein segment in neat aqueous solution

We report an enigmatic peptide ligation reaction catalyzed by Glu-specific Staphylococcus aureus V8 protease that occurs in neat aqueous solution around neutral pH utilizing a totally unprotected peptide substrate containing free alpha-carboxyl and alpha-amino groups. V8 protease catalyzed a chain of ligation steps between pH 6 and 8 at 4 degrees C, producing a gamut of covalent oligomers (dimer through octamer or higher) of a native protein segment TAAAKFE (S39) derived from ribonuclease A (RNAse A). Size-exclusion chromatography suggested the absence of strong interaction between the reacting peptides. The circular dichroism spectra of monomer through pentamer showed length-dependent enhancement of secondary structure in the oligomers, suggesting that protease-catalyzed ligation of a monomer to an oligomer resulted in a product that was more structured than its precursor. The relative conformational stability of the oligomers was reflected in their ability to resist proteolysis, indicating that the oligomerization reaction was facilitated as a consequence of the "conformational trapping" of the product. The ligation reaction proceeded in two phases-slow formation and accumulation of the dimer followed by a fast phase of oligomerization, implying that the conformational trap encountered in the oligomerization reaction was a two-step process. The Gly substitution at any position of the TAAAKFE sequence was deleterious, suggesting that the first step of the conformational trap, namely the dimerization reaction, that proceeded very slowly even with the parent peptide, was quite sensitive to amino acid sequence. In contrast, the oligomerization reaction of an Ala analog, AAAAKFE, occurred in much the same way as S39, albeit with faster rate, suggesting that Ala substitution stabilized the overall conformational trapping process. The results suggest the viability of the product-directed "conformational trap" as a mechanism to achieve peptide ligation of totally unprotected peptide fragments in neat aqueous solution. Further, the study projects the presence of considerable innate synthetic potential in V8 protease, baring rich possibilities of protein engineering of this enzyme to generate a "V8 peptide ligase."

Characterization of the N-terminal domain of the yeast transcriptional repressor Tup1. Proposal for an association model of the repressor complex Tup1 x Ssn6

The yeast Tup1 and Ssn6 proteins form a transcriptional repression complex that represses transcription of a broad array of genes. It has been shown that the N-terminal domain of the Tup1 protein interacts with a region of the Ssn6 protein that consists of 10 tandem copies of a tetratricopeptide motif. In this work, we use a surface plasmon resonance assay to measure the affinity of the N-terminal domain of Tup1 for a minimal 3-TPR domain of Saccharomyces cerevisiae Ssn6 that is sufficient for binding to Tup1. This domain of Ssn6 binds with comparable affinity to S. cerevisiae and Candida albicans Tup1, but with 100-fold lower affinity to Tup1 protein containing a point mutation that gives rise to a defect in repression in vivo. Results from studies using analytical ultracentrifugation, CD spectroscopy, limited proteolysis, and (1)H NMR show that this domain of Tup1 is primarily alpha-helical and forms a stable tetramer that is highly nonglobular in shape. X-ray diffraction recorded from poorly ordered crystals of the Tup1 tetramerization domain contains fiber diffraction typical of a coiled coil. Our results are used to propose a model for the structure of the N-terminal domain of Tup1 and its interaction with the Ssn6 protein.

The coiled-coil trigger site of the rod domain of cortexillin I unveils a distinct network of interhelical and intrahelical salt bridges

BACKGROUND

The parallel two-stranded alpha-helical coiled coil is the most frequently encountered subunit-oligomerization motif in proteins. The simplicity and regularity of this motif have made it an attractive system to explore some of the fundamental principles of protein folding and stability and to test the principles of de novo design.

RESULTS

The X-ray crystal structure of the 18-heptad-repeat alpha-helical coiled-coil domain of the actin-bundling protein cortexillin I from Dictyostelium discoideum is a tightly packed parallel two-stranded alpha-helical coiled coil. It harbors a distinct 14-residue sequence motif that is essential for coiled-coil formation, and is a prerequisite for the assembly of cortexillin I. The atomic structure reveals novel types of ionic coiled-coil interactions. In particular, the structure shows that a characteristic interhelical and intrahelical salt-bridge pattern, in combination with the hydrophobic interactions occurring at the dimer interface, is the key structural feature of its coiled-coil trigger site.

CONCLUSIONS

The knowledge gained from the structure could be used in the de novo design of alpha-helical coiled coils for applications such as two-stage drug targeting and delivery systems, and in the design of coiled coils as templates for combinatorial helical libraries in drug discovery and as synthetic carrier molecules.

Preformed secondary structure drives the association reaction of GCN4-p1, a model coiled-coil system

The structure of the transition state for the rate-limiting step in the folding and association of the homodimeric coiled-coil peptide GCN4-p1, was probed by mutational analysis. A series of quadruple amino acid replacements that spanned the helix propensity scale were made at the four external f positions in the heptad repeat. Equilibrium and kinetic circular dichroism studies demonstrate that both the stability and the unfolding and refolding rate constants vary with helix propensity but also reflect interactions of the altered side-chains with their local environments. Pairwise replacements and fragment studies show that the two C-terminal heptads are the likely source of the nucleating helices. Helix-helix recognition between preformed elements of secondary structure plays an important role in this fundamental folding reaction.

Isolation of the ace1 gene encoding a Cys(2)-His(2) transcription factor involved in regulation of activity of the cellulase promoter cbh1 of Trichoderma reesei

A genetic selection method was developed for the cloning of positive-acting transcriptional regulatory genes in Saccharomyces cerevisiae. The method was applied for the isolation of activators of Trichoderma reesei (Hypocrea jecorina) cellulase genes. Activator genes were isolated from a T. reesei expression cDNA library on the basis of the ability of their translation products to activate transcription from the full-length T. reesei cbh1 promoter coupled to the S. cerevisiae HIS3 gene and to support the growth of the yeast colonies in the absence of histidine. Among the clones obtained was the ace1 gene encoding a novel polypeptide, ACEI, that contains three zinc finger motifs of Cys(2)-His(2) type. Possible ACEI homologues were found among expressed sequence tags of Aspergillus and Neurospora. The ability of ACEI to bind to the cbh1 promoter was further confirmed in the yeast one-hybrid system. In vitro binding and gel mobility shift assays revealed several binding sites for the ACEI protein in the cbh1 promoter. Disruption of the ace1 gene in T. reesei resulted in retarded growth of the fungus on a cellulose-containing medium, on which cellulases are normally highly expressed.

A heterodimeric coiled-coil peptide pair selected in vivo from a designed library-versus-library ensemble

Novel heterodimeric coiled-coil pairs were selected simultaneously from two DNA libraries using an in vivo protein-fragment complementation assay with dihydrofolate reductase, and the best pair was biophysically characterized. We randomized the interface-flanking e and g positions to Gln, Glu, Arg or Lys, and the core a position to Asn or Val in both helices simultaneously, using trinucleotide codons in DNA synthesis. Selection cycles with three different stringencies yielded sets of coiled-coil pairs, of which 80 clones were statistically analyzed. Thereby, properties most crucial for successful heterodimerization could be distinguished from those mediating more subtle optimization. A strong bias towards an Asn pair in the core a position indicated selection for structural uniqueness, and a reduction of charge repulsions at the e/g positions indicated selection for stability. Increased stringency led to additional selection for heterospecificity by destabilizing the respective homodimers. Interestingly, the best heterodimers did not contain exclusively complementary charges. The dominant pair, WinZip-A1B1, proved to be at least as stable in vitro as naturally occurring coiled coils, and was shown to be dimeric and highly heterospecific with a K(D) of approximately 24 nM. As a result of having been selected in vivo it possesses all characteristics required for a general in vivo heterodimerization module. The combination of rational library design and in vivo selection presented here is a very powerful strategy for protein design, and it can reveal new structural relationships.