Glowing graphene quantum dots and carbon dots: properties, syntheses, and biological applications

Photodynamic Anti-Bacteria by Carbon Dots and Their Nano-Composites

The misuse of many types of broad-spectrum antibiotics leads to increased antimicrobial resistance. As a result, the development of a novel antibacterial agent is essential. Photodynamic antimicrobial chemotherapy (PACT) is becoming more popular due to its advantages in eliminating drug-resistant strains and providing broad-spectrum antibacterial resistance. Carbon dots (CDs), zero-dimensional nanomaterials with diameters smaller than 10 nm, offer a green and cost-effective alternative to PACT photosensitizers. This article reviewed the synthesis methods of antibacterial CDs as well as the recent progress of CDs and their nanocomposites in photodynamic sterilization, focusing on maximizing the bactericidal impact of CDs photosensitizers. This review establishes the base for future CDs development in the PACT field.

Aptamer-Adjusted Carbon Dot Catalysis-Silver Nanosol SERS Spectrometry for Bisphenol A Detection

Carbon dots (CDs) can be prepared from various organic (abundant) compounds that are rich in surfaces with –OH, –COOH, and –NH₂ groups. Therefore, CDs exhibit good biocompatibility and electron transfer ability, allowing flexible surface modification and accelerated electron transfer during catalysis. Herein, CDs were prepared using a hydrothermal method with fructose, saccharose, and citric acid as C sources and urea as an N dopant. The as-prepared CDs were used to catalyze AgNO₃–trisodium citrate (TSC) to produce Ag nanoparticles (AgNPs). The surface-enhanced Raman scattering (SERS) intensity increased with the increasing CDs concentration with Victoria blue B (VBB) as a signal molecule. The CDs exhibited a strong catalytic activity, with the highest activity shown by fructose-based CDs. After N doping, catalytic performance improved; with the passivation of a wrapped aptamer, the electron transfer was effectively disrupted (retarded). This resulted in the inhibition of the reaction and a decrease in the SERS intensity. When bisphenol A (BPA) was added, it specifically bound to the aptamer and CDs were released, recovering catalytical activity. The SERS intensity increased with BPA over the concentration range of 0.33–66.67 nmol/L. Thus, the aptamer-adjusted nanocatalytic SERS method can be applied for BPA detection.

Fluorescence turn-off sensing of TNT by polyethylenimine capped carbon quantum dots

In recent years, the determination of 2,4,6-trinitrotoluene (TNT) explosive residues in various matrices has attracted great interest from the perspective of national security and public health. Here, a fluorescent polyethylenimine capped carbon quantum dots (PEI-C-dots) probe was synthesized by a microwave-assisted technique using polyethylenimine and citric acid precursors and used to detect TNT. The sensing mechanism of TNT is based on fluorescence quenching as a result of the donor-acceptor interaction between Meisenheimer anion form of TNT and PEI on the PEI-C-dots surface. The fluorescence quantum yield of the synthesized PEI-C-dots was 54% and the detection limit for TNT was 93 μg/L. It was observed that neither the nitramine group (HMX and RDX) explosives with similar structures nor common soil ions and camouflage agents interfered with the determination of TNT. The interference effect of picric acid was eliminated by removing it with a basic anion exchanger before the determination. This nanosensor allows rapid, simple, selective, and sensitive determination of TNT residues in complex matrices and has the potential to be converted into a kit format.

Biomass-derived porous carbon with high drug adsorption capacity undergoes enzymatic and chemical degradation

Degradability is a key safety issue when choosing materials for biomedical applications and environmental protection. This factor greatly limits the application of porous carbon in these areas due to the inert and stable nature of carbon network. In this work, this conflict could be well-resolved by rational designing a mesoporous carbon (MC) with biomass as a carbon source. The retained oxygen-containing species simultaneously increase drug adsorption capacity and the degradability of MC. The maximum adsorption quantity for doxorubicin over MC can reach 395.3 mg/g, about 3-fold over carbon nanotubes. The detailed analysis reveals that the degradation of MC occurs via a radical mediated oxidation process. The high electron density feature of MC facilitates the electrophilic addition reaction in the presence of HO. During this process, the carbon network is gradually degraded into fragments, carbon nanodots and ultimately to CO₂. This work opens up a new way to fabricate degradable porous materials and provides a promising material for the practical application in biomedical and environmental field.

Graphene quantum dots alleviate ROS-mediated gastric damage

The gastrointestinal (GI) tract is one of the major sites for reactive oxygen species generation (ROS). Physiological ROS, lower than the threshold concentration, is beneficial for human physiology to preserve gut functional integrity. However, ROS generated in large quantities in presence of external stimuli overwhelms the cellular antioxidant defense mechanism and results in oxidative damage and associated physiological disorder. Graphene quantum dots (GQDs) are a class of carbon-based nanomaterials that have attracted tremendous attention not only for their tunable optical properties but also for their broad-spectrum antioxidant properties. In this report we have shown that GQDs are highly efficient in scavenging ROS and suppressing stress-induced gastric ulcers by targeting the MMP-9 pathway and reducing the inflammatory burden by suppressing excessive oxidative stress by inducing high caspase activity, overproduction of Bax, and downregulation of BCL2.

⋅

The gastrointestinal tract is one of the major sites for ROS generation

⋅

Graphene quantum dots (GQDs) have broad-spectrum antioxidant properties

⋅

GQDs scavenge the ROS and suppress gastric ulcers by targeting the MMP-9 pathway

Fluorescence sensing by carbon nanoparticles

Sensing is one of the most important fields in which chemists, engineers and other scientists are involved to realize sensoristic devices that can detect different analytes, both chemicals and biologicals. In this context, fluorescence sensing paves the way for the realization of smart sensoristic devices due to the possibility to detect the target analyte via a change in colour or emission. Recently (since 2006), carbon nanoparticles, which are a "new class" of nanostructures based on carbon atoms, have been widely used in sensing applications due to their intriguing optical properties. The scientific literature on this topic started from 2006 and a progressive increase in the corresponding number of publications has been observed. This review summarises the application of carbon nanoparticles in the sensing field, focusing on chemical and ion sensing.

Research on the Preparation of Graphene Quantum Dots/SBS Composite-Modified Asphalt and Its Application Performance

This study aims to prepare a graphene quantum dots (GQDs)/styrene-butadiene segmented copolymer composite (GQDs/SBS) as an asphalt modifier using the Pickering emulsion polymerization method. The physicochemical properties of the GQDs/SBS modifier and their effects on asphalt modification were investigated. In addition, the GQDs/SBS modifier was compared with the pure SBS modifier. Research results demonstrated that GQDs could be evenly dispersed into the SBS phase to form a uniform composite. Adding GQDs brings more oxygen-containing functional groups into the GQDs/SBS modifier, thus strengthening the polarity and making it disperse into the asphalt better. Compared with the SBS modifier, the GQDs/SBS modifier presents better thermostability. Moreover, GQDs/SBS composite-modified asphalt achieves better high-temperature performance than SBS-modified asphalt, which is manifested by the increased softening points, complex shear modulus and rutting factors. However, the low-temperature performance decreases, which is manifested by reductions in cone penetration, viscosity and ductility as well as the increased ratio between creep stiffness (S) and creep rate (m), that is, S/m. Furthermore, adding GQDs can improve the high-temperature performance of asphalt mixture, but it influences low-temperature and water stability slightly. GQDs/SBS also have the advantages of simple preparation techniques, low cost and are environmentally friendly. Therefore, they have become a beneficial choice as asphalt cementing material modifiers.

Dark-Field Microscopic Study of Cellular Uptake of Carbon Nanodots: Nuclear Penetrability

Carbon nanodots are fascinating candidates for the field of biomedicine, in applications such as bioimaging and drug delivery. However, the nuclear penetrability and process are rarely studied and lack understanding, which limits their applications for drug carriers, single-molecule detection and live cell imaging. In this study, we attempt to examine the uptake of CNDs in cells with a focus on the potential nuclear penetrability using enhanced dark-field microscopy (EDFM) associated with hyperspectral imaging (HSI) to quantitatively determine the light scattering signals of CNDs in the cells. The effects of both CND incubation time and concentration are investigated, and plausible nuclear penetration involving the nuclear pore complex (NPC) is discussed. The experimental results and an analytical model demonstrate that the CNDs’ uptake proceeds by a concentration-dependent three-stage behavior and saturates at a CND incubation concentration larger than 750 µg/mL, with a half-saturated concentration of 479 μg/mL. These findings would potentially help the development of CNDs’ utilization in drug carriers, live cell imaging and other biomedical applications.

Recent advances in carbon quantum dots for virus detection, as well as inhibition and treatment of viral infection

In the last decade, carbon quantum dots (CQDs), as a novel class of carbon-based nanomaterials, have received increasing attention due to their distinct properties. CQDs are ultimately small nanoparticles with an average size below 10 nm, possessing high water solubility, alluring photoluminescence, photostability, excellent biocompatibility, low/none toxicity, environmental friendliness, and high sustainability, etc. In history, there are intermittent threats from viruses to humans, animals and plants worldwide, resulting in enormous crises and impacts on our life, environment, economy and society. Some recent studies have unveiled that certain types of CQDs exhibited high and potent antiviral activities against various viruses such as human coronavirus, arterivirus, norovirus and herpesvirus. Moreover, they have been successfully explored and developed for different virus detections including severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). This article exclusively overviews and discusses the recent progress of designing, synthesizing, modifying/functionalizing and developing CQDs towards effective virus detection as well as the inhibition and treatment of viral infection. Their mechanisms and applications against various pathogenic viruses are addressed. The latest outcomes for combating the coronavirus disease 2019 (COVID-19) utilizing CQDs are also highlighted. It can be envisaged that CQDs could further benefit the development of virus detectors and antiviral agents with added broad-spectrum activity and cost-effective production.

Carbon Dots: An Excellent Fluorescent Probe for Contaminant Sensing and Remediation

Pollution-induced degradation of the environment is a serious problem for both developing and developed countries. Existing remediation methods are restricted, necessitating the development of novel remediation technologies. Nanomaterials with unique characteristics have recently been developed for remediation. Quantum dots (QDs) are semiconductor nanoparticles (1-10 nm) with optical and electrical characteristics that differ from bigger particles owing to quantum mechanics, making them intriguing for sensing and remediation applications. Carbon dots (CDs) offer better characteristics than typical QDs, such as, CdSe QDs in terms of contaminant sensing and remediation. Non-toxicity, chemical inertness, photo-induced electron transfer, good biocompatibility, and adjustable photoluminescence behavior are all characteristics of CDs. CDs are frequently made from sustainable raw materials as they are cost-effective, environmentally compactable, and excellent in reducing waste generation. The goal of this review article is to briefly describe CDs fabrication methods, to deeply investigate the criteria and properties of CDs that make them suitable for sensing and remediation of contaminants, and also to highlight recent advances in their use in sensing and remediation of contaminants.

In-Situ Growth of Mn3 O4 Nanoparticles on Nitrogen-Doped Carbon Dots-Derived Carbon Skeleton as Cathode Materials for Aqueous Zinc Ion Batteries

Mn₃ O₄ is a promising cathode material for aqueous zinc ion batteries (ZIBs) which is a new type of low cost, eco-friendly, high security energy storage system, while those previously reported electrochemical capacities of Mn₃ O₄ are far from its theoretical value. In this work, Mn₃ O₄ nanoparticles and nitrogen-doped carbon dots (NCDs) are synthesized together through an in-situ hydrothermal route, and then calcined to be a nanocomposite in which Mn₃ O₄ nanoparticles are anchored on a nitrogen-doped carbon skeleton (designated as Mn₃ O₄ /NCDs). Although the carbon content is only 3.9 wt.% in the Mn₃ O₄ /NCDs, the NCDs-derived carbon skeleton provides an electrically conductive network and a stable structure. Such a special nanocomposite has a large specific surface area, plenty of active sites, excellent hydrophilicity and good electronic conductivity. Owing to these structural merits, the Mn₃ O₄ /NCDs electrode exhibits a preeminent specific capacity of 443.6 mAh g^-1 and 123.3 mAh g^-1 at current densities of 0.1 and 1.5 A g^-1 in ZIBs, respectively, which are far beyond the bare Mn₃ O₄ nanoparticles synthesized under the similar condition. The electrochemical measurement results prove that carbon dots, as a new type of carbon nanomaterials, have strong ability to modify and improve the performance of existing electrode materials, which may push these electrode materials forward to practical applications.

A Review on the Use of Biochar Derived Carbon Quantum Dots Production for Sensing Applications

Since their discovery, carbon dots have attracted a great deal of interest for their perspective biological applications. Nevertheless, the quenching of carbon dots photoluminescence represents an interesting feature for quantitative analysis in very low concentration of many species. A particular approach for the production of carbon dots is the use of biochar, a carbonized biomass, as a precursor. In this work, we overview the main achievements accomplished by using biochar-derived carbon dots for detecting and quantifying inorganic and organic species. We also provide background knowledge of the main properties, production and purification routes of carbon dots.

One-step solvent-free synthesis of carbon dot-based layered composites exhibiting color-tunable photoluminescence

We here report a practical and green approach to the development of luminescent composites through in situ solvent-free formation of carbon dots on layered inorganic compounds. The composites exhibit higher solid-state photoluminescence than those prepared by mixing of synthesized carbon dots and layered clay minerals. Tuning of the emission color of the composites has also been achieved by the addition of small molecules into phloroglucinol as starting materials for carbonization. The carbon dots synthesized in clay compounds in the solvent-free conditions are well-dispersed to obtain homogeneous composites. Furthermore, we have demonstrated that highly luminescent carbon dots are formed by carbonization in the presence of layered inorganic compounds. The one-step solvent-free approach presented in this work may allow not only facile, economical, and sustainable production of nanostructured carbon dot-based composites but also improvement of their luminescence properties.

A practical and green approach to the development of color-tunable luminescent composites through in situ solvent-free synthesis of carbon dots on layered inorganic compounds is reported.

A Facile Preparation of Multicolor Carbon Dots

Carbon dots (CDs) have raised broad interest because of their great potential in the fluorescence related fields, such as photocatalysis and bioimaging. CDs exhibit different optical properties when dissolved in various solvents. However, the effects of solvents during the process of preparation on the fluorescence emission of CDs are still unclear. In this work, CDs were prepared by a simple one-pot solvothermal route. Typical critic acid and thiourea were used as precursors. Through changing the volume ratio of water to N,N-dimethylformamide (DMF), we have obtained color tunable CDs, with the emission wavelength from 450 to 640 nm. TEM images, Raman and XPS spectra indicate that the particle size of CDs and the content of surface functional groups (C-N/C-S and C≡N bonds) increase with the increasing ratio of DMF to water, which results in the optimal emission wavelength red-shifted. The prepared multicolor CDs may have prospects in the lighting applications.

Structural and spectroscopic characterization of pyrene derived carbon nano dots: a single-particle level analysis

The bottom-up approach has been widely used for large-scale synthesis of carbon nanodots (CNDs). However, the structure and origin of photoluminescence in CNDs synthesized by the bottom-up approach is still a subject of debate. Here, using a series of separation techniques like solvent extraction, column chromatography, gel electrophoresis and dialysis, we present three distinct fluorescent components in CNDs synthesized from pyrene, a well-known precursor molecule. The separated components have qualitative and quantitatively different absorption and emission spectral features including quantum yield (QY). Optical and vibrational spectroscopy techniques combined with electron microscopy indicate that a subtle balance between the extent of graphitization and the presence of molecular fluorophores determines the nature of fluorescence emission. A substantial difference in photons/cycle, single-particle fluorescence blinking, ON-OFF photoswitching strongly supports the distinct nature of the components.

Light amplified oxidative stress in tumor microenvironment by carbonized hemin nanoparticles for boosting photodynamic anticancer therapy

Photodynamic therapy (PDT), which utilizes light excite photosensitizers (PSs) to generate reactive oxygen species (ROS) and consequently ablate cancer cells or diseased tissue, has attracted a great deal of attention in the last decades due to its unique advantages. However, the advancement of PDT is restricted by the inherent characteristics of PS and tumor microenvironment (TME). It is urgent to explore high-performance PSs with TME regulation capability and subsequently improve the therapeutic outcomes. Herein, we reported a newly engineered PS of polymer encapsulated carbonized hemin nanoparticles (P-CHNPs) via a facile synthesis procedure for boosting photodynamic anticancer therapy. Solvothermal treatment of hemin enabled the synthesized P-CHNPs to enhance oxidative stress in TME, which could be further amplified under light irradiation. Excellent in vitro and in vivo PDT effects were achieved due to the improved ROS (hydroxyl radicals and singlet oxygen) generation efficiency, hypoxia relief, and glutathione depletion. Moreover, the superior in vitro and in vivo biocompatibility and boosted PDT effect make the P-CHNPs a potential therapeutic agent for future translational research.

Efficient synthesis of yellow-green carbon quantum dots as a sensitive fluorescent probe of folic acid

Bright yellow-green carbon quantum dots (YGCDs) have been successfully synthesized by a simple and efficient hydrothermal method. Its luminescent absolute quantum yield reached 30.0% in 4 h, compared with that using common reported solvothermal method, the synthesis time was reduced more than 70% with tin oxide nano particles as a catalyst. Moreover, the fluorescence of YGCDs could be selectively quenched by folic acid (FA) molecules, and the relative fluorescence intensities of F/F0 was fitted perfectly in line decay curve versus the concentration of FA in the range of 2.0 × 10-8 mol/l ~ 1.0 × 10-5 mol/l (R2 = 0.9988). The detection limit of FA was below 2.0 × 10-8 mol/l, suggesting a promising fluorescent probe of folic acid.

Advances in preparation, mechanism and applications of graphene quantum dots/semiconductor composite photocatalysts: A review

Due to the low efficiency of single-component nano materials, there are more and more studies on high-efficiency composites. As zero dimensional (0D) non-metallic semiconductor material, the emergence of graphene quantum dots (GQDs) overcomes the shortcomings of traditional photocatalysts (rapid rate of electron-hole recombination and narrow range of optical response). Their uniqueness is that they can combine the advantages of quantum dots (rich functional groups at edge) and sp² carbon materials (large specific surface area). The inherent inert carbon stabilizes chemical and physical properties, and brings new breakthroughs to the development of benchmark photocatalysts. The photocatalytic efficiency of GQDs composite with semiconductor materials (SCs) can be improved by the following three points: (1) accelerating charge transfer, (2) extending light absorption range, (3) increasing active sites. The methods of preparation (bottom-up and top-down), types of heterojunctions, mechanisms of photocatalysis, and applications of GQDs/SCs (wastewater treatment, energy storage, gas sensing, UV detection, antibiosis and biomedicine) are comprehensively discussed. And it is hoped that this review can provide some guidance for the future research on of GQDs/SCs on photocatalysis.

Green-emitting carbon quantum dots as a dual-mode fluorescent and colorimetric sensor for hypochlorite

In this work, green-emitting carbon quantum dots were successfully prepared through a facile one-step solid-state reaction method. The obtained green-emitting carbon dots (G-CDs) showed good fluorescence stability in NaCl aqueous solution and different pH values. Moreover, the G-CDs showed high sensitivity and selectivity for detecting hypochlorite by both fluorometry and colorimetry. Under the optimized condition, a highly sensitive detection of hypochlorite was established in the range of 0.2-100 μM and 10-150 μM for fluorescent and colorimetric methods, respectively. The corresponding limits of detection (LOD) were 0.0781 μM and 1.82 μM, respectively. Therefore, the G-CDs were successfully applied to determinate hypochlorite in actual water samples. In addition, a paper-based sensor loading with the G-CDs was also developed for rapid visual detection of hypochlorite. The results suggested that the G-CDs could be a promising candidate to detect hypochlorite.

Bioactive Graphene Quantum Dots Based Polymer Composite for Biomedical Applications

Today, nanomedicine seeks to develop new polymer composites to overcome current problems in diagnosing and treating common diseases, especially cancer. To achieve this goal, research on polymer composites has expanded so that, in recent years, interdisciplinary collaborations between scientists have been expanding day by day. The synthesis and applications of bioactive GQD-based polymer composites have been investigated in medicine and biomedicine. Bioactive GQD-based polymer composites have a special role as drug delivery carriers. Bioactive GQDs are one of the newcomers to the list of carbon-based nanomaterials. In addition, the antibacterial and anti-diabetic potentials of bioactive GQDs are already known. Due to their highly specific surface properties, π-π aggregation, and hydrophobic interactions, bioactive GQD-based polymer composites have a high drug loading capacity, and, in case of proper correction, can be used as an excellent option for the release of anticancer drugs, gene carriers, biosensors, bioimaging, antibacterial applications, cell culture, and tissue engineering. In this paper, we summarize recent advances in using bioactive GQD-based polymer composites in drug delivery, gene delivery, thermal therapy, thermodynamic therapy, bioimaging, tissue engineering, bioactive GQD synthesis, and GQD green resuscitation, in addition to examining GQD-based polymer composites.

Graphene-based nanomaterials for cancer therapy and anti-infections

Graphene-based nanomaterials (GBNMs) has been thoroughly investigated and extensively used in many biomedical fields, especially cancer therapy and bacteria-induced infectious diseases treatment, which have attracted more and more attentions due to the improved therapeutic efficacy and reduced reverse effect. GBNMs, as classic two-dimensional (2D) nanomaterials, have unique structure and excellent physicochemical properties, exhibiting tremendous potential in cancer therapy and bacteria-induced infectious diseases treatment. In this review, we first introduced the recent advances in development of GBNMs and GBNMs-based treatment strategies for cancer, including photothermal therapy (PTT), photodynamic therapy (PDT) and multiple combination therapies. Then, we surveyed the research progress of applications of GBNMs in anti-infection such as antimicrobial resistance, wound healing and removal of biofilm. The mechanism of GBNMs was also expounded. Finally, we concluded and discussed the advantages, challenges/limitations and perspective about the development of GBNMs and GBNMs-based therapies. Collectively, we think that GBNMs could be potential in clinic to promote the improvement of cancer therapy and infections treatment.

•

Development of GBNMs with unique structure and excellent properties.

•

GBNMs-based therapies for anticancer with improved therapeutic efficacy.

•

GBNMs with antimicrobial activity are widely used in anti-infections.

•

The challenges and perspective of GBNMs for clinical use were thoroughly discussed.

Laser Direct Writing of Graphene Quantum Dots inside a Transparent Polymer

Graphene quantum dots (GQDs) have emerged as a promising new class of environmentally friendly quantum dots with unique properties. However, the limitations of synthesis and patterning methods have hindered GQDs from displaying their true potentials to date. Here, we demonstrate the simultaneous synthesis and patterning of GQDs for the first time inside a transparent polymer, polydimethylsiloxane (PDMS), using femtosecond laser pulses. By focusing and scanning femtosecond laser pulses, arbitrary fluorescent patterns such as a concealed fluorescent QR code can be readily patterned without pre- and/or post-treatment. In addition, the proposed method is applied to the fabrication of fluorescent three-dimensional structures inside a transparent polymer via multiphoton interactions. The proposed method realizes single-stepped and spatially selective patterning of GQDs directly inside polymer substrates and expands the possibilities of GQDs for applications in novel flexible three-dimensional optoelectrical devices.

Strategies to Improve Photodynamic Therapy Efficacy of Metal-Free Semiconducting Conjugated Polymers

Photodynamic therapy (PDT) is a noninvasive therapy for cancer and bacterial infection. Metal-free semiconducting conjugated polymers (SCPS) with good stability and optical and electrical properties are promising photosensitizers (PSs) for PDT compared with traditional small-molecule PSs. This review analyzes the latest progress of strategies to improve PDT effect of linear, planar, and three-dimensional SCPS, including improving solubility, adjusting conjugated structure, enhancing PS-doped SCPs, and combining therapies. Moreover, the current issues, such as hypoxia, low penetration, targeting and biosafety of SCPS, and corresponding strategies, are discussed. Furthermore, the challenges and potential opportunities on further improvement of PDT for SCPs are presented.

Carbon dots: a novel platform for biomedical applications

Carbon dots (CDs) are a recently synthesised class of carbon-based nanostructures known as zero-dimensional (0D) nanomaterials, which have drawn a great deal of attention owing to their distinctive features, which encompass optical properties (e.g., photoluminescence), ease of passivation, low cost, simple synthetic route, accessibility of precursors and other properties. These newly synthesised nano-sized materials can replace traditional semiconductor quantum dots, which exhibit significant toxicity drawbacks and higher cost. It is demonstrated that their involvement in diverse areas of chemical and bio-sensing, bio-imaging, drug delivery, photocatalysis, electrocatalysis and light-emitting devices consider them as flawless and potential candidates for biomedical application. In this review, we provide a classification of CDs within their extended families, an overview of the different methods of CDs preparation, especially from natural sources, i.e., environmentally friendly and their unique photoluminescence properties, thoroughly describing the peculiar aspects of their applications in the biomedical field, where we think they will thrive as the next generation of quantum emitters. We believe that this review covers a niche that was not reviewed by other similar publications.

Application of up-conversion molecularly imprinted nanoprobe for selective recognition and straightforward detection of 4-aminobiphenyl

A new method was developed for selectively and rapidly detecting carcinogen 4-aminobiphenyl, with lower limit of detection and wider linear range. Up-conversion nanoparticles β-NaGdF₄:Yb³⁺, Er³⁺ was the first time to choose as light-emitting signal component. Molecularly imprinted polymers (MIPs) with specific recognition ability were successfully coated on the surface of β-NaGdF₄:Yb³⁺, Er³⁺ to obtain a nano fluorescent probe for detecting 4-aminobiphenyl. The effect of addition amount of β-NaGdF₄:Yb³⁺, Er³⁺ on the detection ability of β-NaGdF₄:Yb³⁺, Er³⁺@MIPs was studied, and composite fluorescence nanoprobe with the best performance was obtained. β-NaGdF₄:Yb³⁺, Er³⁺@MIPs were characterized by transmission electron microscopy, X-ray powder diffractometer, Fourier transform infrared spectroscopy and thermogravimetric analysis. The fluorescence intensity of β-NaGdF₄:Yb³⁺, Er³⁺@MIPs decreased significantly compared with molecularly non-imprinted polymers β-NaGdF₄:Yb³⁺, Er³⁺@NIPs (the maximum emission peak is at 541 nm) in the presence of 4-aminobiphenyl. Adsorption isotherm and adsorption kinetics between UCNP@MIPs and 4-ABP have been investigated and a satisfactory imprinting factor is 2.5. The detection mechanism is proved to be based on Langmuir adsorption and internal filtration effect. Under optimal experimental conditions, the limit of detection and quantification are 0.16 μM and 0.53 μM, respectively. The linear range of response is 1-50 μM, and RSD is less than 6.7%. This method was applied to determining river water samples in order to evaluate the practicability, and the good recovery rate is between 98.89% and 109.7%. These evidences demonstrate that β-NaGdF₄:Yb³⁺, Er³⁺@MIPs is successfully used for the detection of 4-aminobiphenyl.

Tumor-Targeted Fluorescence Imaging and Mechanisms of Tumor Cell-Derived Carbon Nanodots

An ideal cancer diagnostic probe should possess precise tumor-targeted accumulation with negligible sojourn in normal tissues. Herein, tumor cell-derived carbon nanodots (C-CND_U87 and C-CND_HepG2) about 3~7 nm were prepared by a solvothermal method with stable fluorescence and negligible cytotoxicity. More interestingly, due to the differences in gene expression of cancers, C-CND structurally mimicked the corresponding precursors during carbonization in which carbon nanodots were functionalized with α-amino and carboxyl groups with different densities on their edges. With inherent homology and homing effect, C-CND were highly enriched in precursor tumor tissues. Mechanistic studies showed that under the mediation of the original configuration of α-amino and carboxyl groups, C-CND specifically bound to the large neutral amino acid transporter 1 (LAT1, overexpressed in cancer cells), achieving specific tumor fluorescence imaging. This work provided a new vision about tumor cell architecture-mimicked carbon nanodots for tumor-targeted fluorescence imaging.

Superior resistance-thermal stability of carbon dots@NaBiF4 nanocomposite: facile synthesis and surface configurations

Carbon dots (CDs), emerging as promising materials for optoelectronic and biomedicine applications, are widely investigated due to their distinct merits of facile preparation, biocompatibility, and environment-friendliness. Here, a unique strategy...

Carbon dot/inorganic nanomaterial composites

The preparation methods, formation mechanism, properties and applications of carbon dot/inorganic nanohybrid materials are reported.

Post-synthetic modification of graphene quantum dots bestows enhanced biosensing and antibiofilm ability: efficiency facet

Graphene quantum dots (GQDs) are a luminescent class of carbon nanomaterials with a graphene-like core structure, possessing quantum confinement and edge effects. They have gained importance in the biological world due to their inherent biocompatibility, good water dispersibility, excellent fluorescence and photostability. The improved properties of GQDs require the logical enactment of functional groups, which can be easily attained through post-synthetic non-covalent routes of modification. In this regard, the present work has for the first time employed a simple one-pot post-modification method utilizing the salt of amino caproic acid, an FDA approved reagent. The adsorption of the modifier on GQDs with varying weight ratios is characterized through DLS, zeta potential, Raman, absorption and fluorescence spectroscopy. A decrease of 20% in the fluorescence intensity with an increase in the modifier ratio from 1 to 1000 and an increased DLS size as well as zeta potential demonstrate the efficient modification as well as higher stability of the modified GQDs. The modified GQDs with a high weight ratio (1 : 100) of the modifier showed superior ability to sense dopamine, a neurotransmitter, as well as competent biofilm degradation ability. The modified GQDs could sense more efficiently than pristine GQDs, with a sensitivity as low as 0.06 μM (limit of detection) and 90% selectivity in the presence of other neurotransmitters. The linear relationship showed a decrease in the fluorescence intensity with increasing dopamine concentration from 0.0625 μM to 50 μM. Furthermore, the efficiency of the modified GQDs was also assessed in terms of their antibiofilm effect against Staphylococcus aureus. The unmodified GQDs showed only 10% disruption of the adhered bacterial colonies, while the modified GQDs (1 : 100) showed significantly more than 60% disruption of the biofilm, presenting the competency of the modified GQDs. The unique modifications of GQDs have thus proven to be an effective method for the proficient utilization of zero-dimensional carbon nanomaterials for biosensing, bioimaging, antibacterial and anti-biofilm applications.

The present work highlights a novel post-synthetic modification route for graphene quantum dots, which was found to be efficient for both the biosensing of dopamine as well as Staphylococcus aureus biofilm degradation.

A ratiometric fluorescence strategy based on polyethyleneimine surface-modified carbon dots and Eosin Y for the ultrasensitive determination of protamine and trypsin

A ratiometric fluorescent nanoprobe for protamine and trypsin detection with excellent biocompatibility and high sensitivity was successfully constructed based on CDs-PEI and Eosin Y.

Optical properties and photoactivity of carbon nanodots synthesized from olive solid wastes at different carbonization temperatures

Carbon nanodots (CNDs) have many fascinating properties, such as optical properties (UV-Visible absorption and fluorescence emission), which make them good candidates in many applications, such as photocatalysts for the degradation of several organic pollutants. This study aims to synthesize CNDs from olive solid wastes at different carbonization temperatures from 300 to 900 °C and study the effect on the optical properties of the CNDs, such UV-Vis, fluorescence, quantum yield, and energy bandgap, in addition to the influence on the photoactivity of the CNDs as photocatalysts for the degradation of methylene blue (MB). CNDs were prepared from olive solid wastes (OSWs) by pyrolysis at different temperatures (300–900 °C) for conversion to carbonized material, and then oxidized chemically in the presence of hydrogen peroxide (H₂O₂). It was found that an increase in the carbonization temperature of the OSWs leads to an increase in the product yield with a maximum value at 500 °C, and it then decreased dramatically. On the other hand, a decrease in fluorescence due to the diminishment of oxygen groups and the destruction of the surface of the CNDs was observed. The higher quantum yield (5.17%) and bandgap (2.77 eV) were achieved for CNDs prepared from OSWs that carbonized at 300 °C. The rate and degradation efficiency of MB were studied with the different synthesized CNDs, and it was found that an increase in the carbonization temperature leads to a decrease in the rate and degradation efficiency of MB, with the highest degradation rate of 0.0575 min⁻¹ and degradation efficiency of 100% after 120 minutes of light irradiation being realized for the sample carbonized at 300 °C.

Carbon nanodots with different optical properties and photoactivity degrees as photocatalysts for the degradation of methylene blue are successfully synthesized from olive solid wastes at different carbonization temperatures.

Coronene-based quantum dots for the delivery of the doxorubicin anticancer drug: a computational study

The coronene family could serve as a useful platform for the delivery of and tracking the release of the anticancer DOX drug.

New rout for synthesizing triammonium citrate crystal with unique crystallography and its application in synthesizing nitrogen doped graphene quantum dot

Triammonium citrate crystal (TAC) has many applications in food, pharmaceutical, agricultural and other industries. In this work, TAC crystals were synthesized using a new method and with the least use of materials and tools. This crystal has a unique structure and special and new angles and bonds that were identified by crystallography. This crystal was then used to synthesize nitrogen- doped graphene quantum dot (N-GQD) with hydrothermal method. Synthesized N-GQD has particular morphology, fluorescence and viscosity. Compared with other nitrogen compounds necessary for N-GQDs synthesis, ammonia is much more suitable due to its low toxicity and stability. Synthesized TAC and N-GQD were identified by FT-IR, XRD, TGA, EDS, SEM, crystallography and fluorescence.

Synergistic Effect in a Graphene Quantum Dot-Enabled Luminescent Skinlike Copolymer for Long-Term pH Detection

The alluring properties of a luminescent graphene quantum dot (GQD)-based nanocomposite are unquestionable to realize many advanced applications, such as sweat pH sensors. The well-suited hydrophilic polymers to host GQDs can face an unavoidable swelling behavior, which deteriorates the mechanical stability, whereas the hydrophobic polymers can prevent swelling but at the same time barricade the analyte pathways to GQDs. To resolve the two aforementioned obstacles, we develop a nanocomposite film containing nitrogen-doped GQDs (NGQDs) incorporated into a transparent, elastic, and self-healable polymer matrix, composed of a hydrophobic n-butyl acrylate segment and a hydrophilic N-(hydroxymethyl)acrylamide segment for wearable healthcare pH sensors on the human body. Besides serving as the fluorescence source, NGQDs are also designed as a nano-cross-linker to promote abundant chemical and physical interactions within the nanocomposite network. This synergetic effect gives rise to a 10-fold higher mechanical strength, 7-fold increment in Young's modulus, 4-fold increment in toughness, and 15-fold more sensitivity in pH detection (pH 3-10) compared to those of the pristine copolymer and NGQDs, respectively. Moreover, the mechanically enhanced nanocomposite possesses a high self-healing efficiency (94%) at room temperature even under water and demonstrates a stable sensing performance after repetitive usage for 30 days. Our work provides insights into the simple preparation of human skinlike nanocomposite elastomers usable for wearable pH sensors.

Carbon dot based nucleus targeted fluorescence imaging and detection of nuclear hydrogen peroxide in living cells

Investigation of the intracellular generation of H₂O₂, one of the most important reactive oxygen species (ROS), is crucial for preventing various diseases since it is closely linked with different physiological and complex cell signaling pathways. Despite the development of various fluorescent probes, the majority of the fluorescent probes cannot move across the nuclear membrane. However, detection of the nuclear level of H₂O₂ is very important since it can directly cause oxidative DNA damage which ultimately leads to various diseases. Therefore, in this study, p-phenylenediamine based carbon quantum dots (B-PPD CDs) have been synthesized and integrated with 4-formylbenzeneboronic acid as a doping agent for the detection of H₂O₂. The detection mechanism showed that, upon exposure to H₂O₂, the fluorescence of the B-PPD CDs was immediately quenched. Further investigation has been done in the in vitro RAW 264.7 cell line by both exogenous and endogenous exposure of H₂O₂ to demonstrate the feasibility of the method. It is shown successfully that the exogenous presence and endogenous generation of H₂O₂ in RAW 264.7 cells can be detected using B-PPD CDs. The limit of detection (LOD) was determined to be 0.242 μM. The development of such imaging probes using carbon quantum dots will lead to live-cell imaging as well as ROS detection.

Smartphone-assisted ratiometric fluorescence sensing platform and logical device based on polydopamine nanoparticles and carbonized polymer dots for visual and point-of-care testing of glutathione

As a crucial biothiol, glutathione (GSH) plays a key role in the organisms. Monitoring GSH level is of great significance for disease diagnosis and biomedical research. In this work, polydopamine (PDA) nanoparticles-red fluorescent carbonized polymer dots (r-CPDs) based ratiometric fluorescence sensing platform was constructed and employed for GSH assay. Dopamine (DA) could be oxidized by cobalt oxyhydroxide (CoOOH) nanosheets and further polymerized into PDA nanoparticles with green fluorescence. However, in the presence of GSH, CoOOH nanosheets were reduced and decomposed, which prevented the production of PDA nanoparticles. In the sensing system, green-emitting PDA nanoparticles were employed as a response unit and r-CPDs were used as an internal reference unit. With the addition of GSH, the green fluorescence of PDA nanoparticles decreased as well as the red fluorescence of system remained relatively stable. Importantly, a distinct fluorescence color evolution from green to red was presented with a serious of GSH concentrations. Based on this, a portable smartphone-assisted ratiometric chromaticity analytical method was developed to achieve the on-site visual detection of GSH. Both the established ratiometric fluorescence and ratiometric chromaticity sensing methods for GSH assay have the merits of wide linear range, high sensitivity and excellent accuracy, which are suitable for the determination of GSH in human serum and exhibit great application potential in rapid and accurate monitoring of the GSH levels in clinical. Moreover, an ingenious logical device reflecting GSH levels was designed based on the two different fluorescence signals, which provided a new strategy for the intelligent online detection of GSH in complex biological matrices.

Fabrication of GQD-Electrodeposited Screen-Printed Carbon Electrodes for the Detection of the CRP Biomarker

The traditional three-electrode electrochemical system used in the development of biosensors for detecting various biomarkers of interest necessitates the use of bulk electrodes, which precludes the deployment of handheld electrochemical devices in clinical applications. Affordable screen-printed carbon electrodes (SPCEs) modified with functional interfaces are being developed to enhance the sensitivity of a compact sensing system as a whole. In this work, SPCEs were fabricated on an overhead projection (OHP) sheet in three different active areas of 2 × 2, 3 × 3, and 4 × 4 mm² using a screen printing technique, and then ∼2 nm sized graphene quantum dots (GQDs) were electrodeposited over the SPCE surface to add functionality for the detection of ultralow levels of one of the cardiac biomarkers, C-reactive protein (CRP). The proposed mediator-dependent voltammetric biosensor exhibited good sensitivity, a low detection limit, and a linear range of 2.45 μA ng^-1 mL^-1 cm^-2, 0.036 ng mL^-1, and 0.5-10 ng mL^-1, respectively. The fabricated SPCE/GQDs/anti-CRP biosensor could rapidly detect CRP in less than 25 s. The intra- and interassays were performed with five sensor strips, which showed a minimum standard deviation of 1.85 and 2.8%, respectively. The SPCE/GQDs/anti-CRP electrode was used to detect CRP concentrations in a ringer lactate solution. Thus, the developed biosensor has all of the characteristics such as rapidity, inexpensive disposable electrodes, miniaturization, and a lower detection limit needed to evolve as a point-of-care (PoC) application.

Quantum dots and photodynamic therapy in COVID ‐19 treatment

Viral diseases are regarded as a global burden. The eradication of viral diseases is always a challenging task in medical research due to the high infectivity and mutation capability of the virus. The ongoing COVID‐19 pandemic is still not under control even after several months of the first reported case and global spread. In the pursuit of a promising strategy, carbon dots could be considered as potential nanostructure against this viral pandemic. Carbon dots are photoluminescent carbon nanoparticles, smaller than 10 nm in dimension with a very attractive photostable and biocompatible properties which can be surfaced modified or functionalized. These photoluminescent tiny particles have captured much attention owing to their functionalization property and biocompatibility. Photodynamic therapy (PDT) is a technique that is widely used in cancer treatment and against various microbes. In this technique, a light‐induced photosensitizer generates reactive oxygen species (ROS), ultimately killing the target cells. Considering these facts, an attempt has been made to review the current literature on viral inactivation using PDT approach. Accordingly, the mechanism of PDT action has been discussed, along with an update on the use of various photosensitizers (PSs) and nanoparticles. The capsid proteins and nucleic acid (RNA) of SARS‐CoV‐2 can be a possible target for PDT.

Experimental and Simulation Research on the Preparation of Carbon Nano-Materials by Chemical Vapor Deposition

Carbon nano-materials have been widely used in many fields due to their electron transport, mechanics, and gas adsorption properties. This paper introduces the structure and properties of carbon nano-materials the preparation of carbon nano-materials by chemical vapor deposition method (CVD)—which is one of the most common preparation methods—and reaction simulation. A major factor affecting the material structure is its preparation link. Different preparation methods or different conditions will have a great impact on the structure and properties of the material (mechanical properties, electrical properties, magnetism, etc.). The main influencing factors (precursor, substrate, and catalyst) of carbon nano-materials prepared by CVD are summarized. Through simulation, the reaction can be optimized and the growth mode of substances can be controlled. Currently, numerical simulations of the CVD process can be utilized in two ways: changing the CVD reactor structure and observing CVD chemical reactions. Therefore, the development and research status of computational fluid dynamics (CFD) for CVD are summarized, as is the potential of combining experimental studies and numerical simulations to achieve and optimize controllable carbon nano-materials growth.

Graphene Biodevices for Early Disease Diagnosis Based on Biomarker Detection

The early diagnosis of diseases plays a vital role in healthcare and the extension of human life. Graphene-based biosensors have boosted the early diagnosis of diseases by detecting and monitoring related biomarkers, providing a better understanding of various physiological and pathological processes. They have generated tremendous interest, made significant advances, and offered promising application prospects. In this paper, we discuss the background of graphene and biosensors, including the properties and functionalization of graphene and biosensors. Second, the significant technologies adopted by biosensors are discussed, such as field-effect transistors and electrochemical and optical methods. Subsequently, we highlight biosensors for detecting various biomarkers, including ions, small molecules, macromolecules, viruses, bacteria, and living human cells. Finally, the opportunities and challenges of graphene-based biosensors and related broad research interests are discussed.