Recent developments and applications of immobilized laccase

Preparation and Optimisation of Cross-Linked Enzyme Aggregates Using Native Isolate White Rot Fungi Trametes versicolor and Fomes fomentarius for the Decolourisation of Synthetic Dyes

The key to obtaining an optimum performance of an enzyme is often a question of devising a suitable enzyme and optimisation of conditions for its immobilization. In this study, laccases from the native isolates of white rot fungi Fomes fomentarius and/or Trametes versicolor, obtained from Czech forests, were used. From these, cross-linked enzyme aggregates (CLEA) were prepared and characterised when the experimental conditions were optimized. Based on the optimization steps, saturated ammonium sulphate solution (75 wt.%) was used as the precipitating agent, and different concentrations of glutaraldehyde as a cross-linking agent were investigated. CLEA aggregates formed under the optimal conditions showed higher catalytic efficiency and stabilities (thermal, pH, and storage, against denaturation) as well as high reusability compared to free laccase for both fungal strains. The best concentration of glutaraldehyde seemed to be 50 mM and higher efficiency of cross-linking was observed at a low temperature 4 °C. An insignificant increase in optimum pH for CLEA laccases with respect to free laccases for both fungi was observed. The results show that the optimum temperature for both free laccase and CLEA laccase was 35 °C for T. versicolor and 30 °C for F. fomentarius. The CLEAs retained 80% of their initial activity for Trametes and 74% for Fomes after 70 days of cultivation. Prepared cross-linked enzyme aggregates were also investigated for their decolourisation activity on malachite green, bromothymol blue, and methyl red dyes. Immobilised CLEA laccase from Trametes versicolor showed 95% decolourisation potential and CLEA from Fomes fomentarius demonstrated 90% decolourisation efficiency within 10 h for all dyes used. These results suggest that these CLEAs have promising potential in dye decolourisation.

Immobilized Cerrena sp. laccase: preparation, thermal inactivation, and operational stability in malachite green decolorization

Laccases are polyphenol oxidases with widespread applications in various industries. In the present study, the laccase from Cerrena sp. HYB07 was immobilized with four methods, namely entrapment in alginate, covalently binding to chitosan as well as formation of cross-linked enzyme aggregates (CLEAs) and magnetic CLEAs (M-CLEAs). The activity recovery rates of the immobilized laccases ranged from 29% to 68%. Immobilization elevated the reaction temperature optimum and reduced substrate specificity, but not necessarily the turnover rate. pH stability of immobilized laccases was improved compared with that of the free laccase, especially at acidic pH values. Thermal inactivation of all laccases followed a simple first-order exponential decay model, and immobilized laccases displayed higher thermostability, as manifested by lower thermal inactivation rate constants and longer enzyme half-life time. Operational stability of the immobilized laccase was demonstrated by decolorization of the triphenylmethane dye malachite green (MG) at 60 °C. MG decolorization with free laccase was accompanied by a shift of the absorption peak and accumulation of a stable, colored intermediate tetradesmethyl MG, probably due to lower thermostability of the free laccase and premature termination of the degradation pathway. In contrast, complete decolorization of MG was achieved with laccase CLEAs at 60 °C.

Methanol/Oxygen Enzymatic Biofuel Cell Using Laccase and NAD+-Dependent Dehydrogenase Cascades as Biocatalysts on Carbon Nanodots Electrodes

The efficient immobilization of enzymes on favorable supporting materials to design enzyme electrodes endowed with specific catalysis performances such as deep oxidation of biofuels, and direct electron transfer (DET)-type bioelectrocatalysis is highly desired for fabricating enzymatic biofuel cells (BFCs). In this study, carbon nanodots (CNDs) have been used as the immobilizing matrixes and electron relays of enzymes to construct (NAD⁺)-dependent dehydrogenase cascades-based bioanode for the deep oxidation of methanol and DET-type laccase-based biocathode for oxygen reduction to water. At the bioanode, multiplex enzymes including alcohol dehydrogenase, aldehyde dehydrogenase, and formate dehydrogenase are coimmobilized on CNDs electrode which is previously coated with in situ polymerized methylene blue as the electrocatalyst for oxidizing NADH to NAD⁺. At the biocathode, fungal laccase is directly cast on CNDs and facilitated DET reaction is allowed. As a result, a novel membrane-less methanol/O₂ BFC has been assembled and displays a high open-circuit voltage of 0.71(±0.02) V and a maximum power density of 68.7 (±0.4) μW cm^-2. These investigated features imply that CNDs may act as new conductive architectures to elaborate enzyme electrodes for further bioelectrochemical applications.

SnO2 hollow nanotubes: a novel and efficient support matrix for enzyme immobilization

A major challenge in the industrial use of enzymes is maintaining their stability at elevated temperatures and in harsh organic solvents. In order to address this issue, we investigated the use of nanotubes as a support material for the immobilization and stabilization of enzymes in this work. SnO₂ hollow nanotubes with a high surface area were synthesized by electrospinning the SnCl₂ precursor and polyvinylpyrrolidone (dissolved in dimethyl formamide and ethanol). The electrospun product was used for the covalent immobilization of enzymes such as lipase, horseradish peroxidase, and glucose oxidase. The use of SnO₂ hollow nanotubes as a support was promising for all immobilized enzymes, with lipase having the highest protein loading value of 217 mg/g, immobilization yield of 93%, and immobilization efficiency of 89%. The immobilized enzymes were fully characterized by various analytical methods. The covalently bonded lipase showed a half-life value of 4.5 h at 70 °C and retained ~91% of its original activity even after 10 repetitive cycles of use. Thus, the SnO₂ hollow nanotubes with their high surface area are promising as a support material for the immobilization of enzymes, leading to improved thermal stability and a higher residual activity of the immobilized enzyme under harsh solvent conditions, as compared to the free enzyme.

Graphene oxide-enzyme hybrid nanoflowers for efficient water soluble dye removal

High efficient enzyme immobilization on carbon based conductive supports could provide wide applications in energy and environmental science. Here, we synthesized a 3D flower-like structured self-assembly hybrid nanocomposite with copper phosphate, laccase, graphite oxide (GO) and carbon nanotubes (CNTs) via a facile one-pot strategy under mild conditions. The prepared nanocomposite exhibited very high enzyme loading and improved laccase activity. During the formation of the nanocomposite, the copper phosphate-laccase petals were interwined by CNTs, and GO nanosheets were further coated on the petal surface. Such a configuration ensured high enzyme loading between the GO sheets and good mass transfer efficiency between immobilized enzyme and substrate, which was confirmed by the kinetics test. We further deposited the immobilized enzyme onto electrodes and observed significantly improved direct electron transfer efficiency. Furthermore, higher dye removal efficiency was observed with the immobilized enzyme. The highly efficient enzyme immobilization strategy provides significant opportunity for its application in bioelectronics and wastewater treatment.

Formulation of Laccase Nanobiocatalysts Based on Ionic and Covalent Interactions for the Enhanced Oxidation of Phenolic Compounds

Oxidative biocatalysis by laccase arises as a promising alternative in the development of advanced oxidation processes for the removal of xenobiotics. The aim of this work is to develop various types of nanobiocatalysts based on laccase immobilized on different superparamagnetic and non-magnetic nanoparticles to improve the stability of the biocatalysts. Several techniques of enzyme immobilization were evaluated based on ionic exchange and covalent bonding. The highest yields of laccase immobilization were achieved for the covalent laccase nanoconjugates of silica-coated magnetic nanoparticles (2.66 U mg−1 NPs), formed by the covalent attachment of the enzyme between the aldehyde groups of the glutaraldehyde-functionalized nanoparticle and the amino groups of the enzyme. Moreover, its application in the biotransformation of phenol as a model recalcitrant compound was tested at different pH and successfully achieved at pH 6 for 24 h. A sequential batch operation was carried out, with complete recovery of the nanobiocatalyst and minimal deactivation of the enzyme after four cycles of phenol oxidation. The major drawback associated with the use of the nanoparticles relies on the energy consumption required for their production and the use of chemicals, that account for a major contribution in the normalized index of 5.28 × 10−3. The reduction of cyclohexane (used in the synthesis of silica-coated magnetic nanoparticles) led to a significant lower index (3.62 × 10−3); however, the immobilization was negatively affected, which discouraged this alternative.

Advances in biotechnological synthetic applications of carbon nanostructured systems

In the last few years carbon nanostructures have been applied for the immobilization of enzymes and biomimetic organo-metallic species useful for biotechnological applications. The nature of the support and the method of immobilization are responsible for the stability, reactivity and selectivity of the system. In this review, we focus on the recent advances in the use of carbon nanostructures, carbon nanotubes, carbon nanorods, fullerene and graphene for the preparation of biocatalytic and biomimetic systems and for their application in the development of green chemical processes.

Improved laccase production by Funalia trogii in absorbent fermentation with nutrient carrier

A novel strategy of enhancing laccase production by absorbent fermentation was investigated. Peanut shell was used as nutrient carrier for laccase production by Funalia trogii IFP0027 in the absorbent fermentation. The maximum laccase production was reached to 11,900 U/l, which was 4.97 times higher than that of the control group. The results indicated that carbohydrates and phenolic substances especially flavonoids contained in peanut shell stimulated laccase production by F. trogii. Meanwhile, the peanut shell nutrient carrier could not only alleviate the oxidative damage, owing to strong scavenging activity on hydroxyl, but also relieve the mechanical stresses to form small and regular microbial pellets. Therefore, the absorbent fermentation using peanut shell as nutrient carrier shows enormous potential in enhancing laccase production.

Laccases: Production, Expression Regulation, and Applications in Pharmaceutical Biodegradation

Laccases are a family of copper-containing oxidases with important applications in bioremediation and other various industrial and biotechnological areas. There have been over two dozen reviews on laccases since 2010 covering various aspects of this group of versatile enzymes, from their occurrence, biochemical properties, and expression to immobilization and applications. This review is not intended to be all-encompassing; instead, we highlighted some of the latest developments in basic and applied laccase research with an emphasis on laccase-mediated bioremediation of pharmaceuticals, especially antibiotics. Pharmaceuticals are a broad class of emerging organic contaminants that are recalcitrant and prevalent. The recent surge in the relevant literature justifies a short review on the topic. Since low laccase yields in natural and genetically modified hosts constitute a bottleneck to industrial-scale applications, we also accentuated a genus of laccase-producing white-rot fungi, Cerrena, and included a discussion with regards to regulation of laccase expression.

Upgrading Laccase Production and Biochemical Properties: Strategies and Challenges

Improving laccases continues to be crucial in novel biotechnological developments and industrial applications, where they are concerned. This review breaks down and explores the potential of the strategies (conventional and modern) that can be used for laccase enhancement (increased production and upgraded biochemical properties such as stability and catalytic efficiency). The challenges faced with these approaches are briefly discussed. We also shed light on how these strategies merge and give rise to new options and advances in this field of work. Additionally, this article seeks to serve as a guide for students and academic researchers interested in laccases. This document not only gives basic information on laccases, but also provides updated information on the state of the art of various technologies that are used in this line of investigation. It also gives the readers an idea of the areas extensively studied and the areas where there is still much left to be done. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:1015-1034, 2017.

Immobilized ligninolytic enzymes: An innovative and environmental responsive technology to tackle dye-based industrial pollutants - A review

In the twenty-first century, chemical and associated industries quest a transition prototype from traditional chemical-based concepts to a greener, sustainable and environmentally-friendlier catalytic alternative, both at the laboratory and industrial scale. In this context, bio-based catalysis offers numerous benefits along with potential biotechnological and environmental applications. The bio-based catalytic processes are energy efficient than conventional methodologies under moderate processing, generating no and negligible secondary waste pollution. Thanks to key scientific advances, now, solid-phase biocatalysts can be economically tailored on a large scale. Nevertheless, it is mandatory to recover and reprocess the enzyme for their commercial feasibility, and immobilization engineering can efficiently accomplish this challenge. The first part of the present review work briefly outlines the immobilization of lignin-modifying enzymes (LMEs) including lignin peroxidase (LiP), manganese peroxidase (MnP) and laccase of white-rot fungi (WRF). Whereas, in the second part, a particular emphasis has been given on the recent achievements of carrier-immobilized LMEs for the degradation, decolorization, or detoxification of industrial dyes and dye-based industrial wastewater effluents.

Decolorization of Color Index Acid Orange 20 buffer solution using horseradish peroxidase immobilized on modified PAN-beads

In the present work, horseradish peroxidase (HRP) is utilized to be immobilized onto polyacrylonitrile based beads (PAN-beads) for decolorization of Color Index (C. I.) Acid Orange 20 (AO20) in aqueous solution.

Hollow cross-linked enzyme aggregates (h-CLEA) of laccase with high uniformity and activity

Hollow cross-linked enzyme aggregates of laccase (h-CLEA laccase) can be prepared by employing a millifluidic reactor carrying two coaxial laminar flows. In a confluence zone where acetonitrile and an aqueous solution of laccase meet, diffusion of acetonitrile into the aqueous solution gives rise to rapid precipitation of laccase aggregates at the water/acetonitrile interface, as is evidenced by fluorescence images. By controlling the flow rates carefully in the laminar flow regions, h-CLEA laccase around 220±10nm can be obtained, and the size of the h-CLEA laccase increases with increasing flow rates of both solutions. The h-CLEA laccase particles are distinctly different from CLEA laccase prepared in batch processes. The former only consist a crust of cross-linked enzymes (with a hollow core) whereas the latter has a highly porous structure. When the h-CLEA laccase is used as biocatalysts, their activity (0.26U/mg) is comparable to that of free enzymes at neutral pH due to the hollow structure. Moreover, the activity of h-CLEA laccase is higher than that of free laccase at high pH. For example, trypan blue (a dye molecule) can be decolorized completely in the presence of h-CLEA laccase within 270min even at pH 10.0, at which the free enzyme completely loses its activity. Because of their uniform sizes, h-CLEA laccase can be trapped in a membrane for continuous degradation of trypan blue up to 96h without losing any activity. This study shows the superiority of h-CLEA laccase compared to other types of immobilized enzymes.

Designed synthesis and surface engineering strategies of magnetic iron oxide nanoparticles for biomedical applications

Iron oxide nanoparticles (NPs) hold great promise for future biomedical applications because of their magnetic properties as well as other intrinsic properties such as low toxicity, colloidal stability, and surface engineering capability. Numerous related studies on iron oxide NPs have been conducted. Recent progress in nanochemistry has enabled fine control over the size, crystallinity, uniformity, and surface properties of iron oxide NPs. This review examines various synthetic approaches and surface engineering strategies for preparing naked and functional iron oxide NPs with different physicochemical properties. Growing interest in designed and surface-engineered iron oxide NPs with multifunctionalities was explored in in vitro/in vivo biomedical applications, focusing on their combined roles in bioseparation, as a biosensor, targeted-drug delivery, MR contrast agents, and magnetic fluid hyperthermia. This review outlines the limitations of extant surface engineering strategies and several developing strategies that may overcome these limitations. This study also details the promising future directions of this active research field.

Assessment of methods of detection of water estrogenicity for their use as monitoring tools in a process of estrogenicity removal

Methods of monitoring of estrogenicity in water were gathered, compared, and tested within the context of their practical use as measurement and design tools, in the development of a process of degradation of estrogenic endocrine disruptors. In this work, the focus was put on in vitro assays, with the use of analytical techniques as additional analysis when possible. Practically, from a literature review, four methods that seemed most suitable to practical use required in a process development were tested: the Yeast Estrogen Screen assay, the Lyticase-assisted Yeast Estrogen Screen assay (LYES), the MMV-LUC assay and the HPLC-UV analytical method. Dose-response curves in response to estrogenic standard 17β-estradiol were compared. Bisphenol A estrogenicity was measured by the methods as well. The model for the calculation of estradiol equivalents as measurements units was adapted. The methods were assessed in terms of ranges of detection, time of experiment, cost, ease of the experiment, reproducibility, etc. Based on that assessment, the LYES assay was selected and successfully applied to the monitoring of estrogenicity removal from 17β-estradiol and bisphenol A. More precisely, the bioassay allowed the acquisition of kinetic curves for a laboratory-scaled process of estrogenicity removal by immobilized enzymes in a continuous packed-bed reactor. The LYES assay was found to have a real methodological potential for scale-up and design of a treatment process. The HPLC-UV method showed good complementarity with the LYES assay for the monitoring of bisphenol A concentrations in parallel with estrogenicity, reporting no significant estrogenicity from degradation byproducts, among others.

Bioinspired Multifunctional Membrane for Aquatic Micropollutants Removal

Micropollutants present in water have many detrimental effects on the ecosystem. Membrane technology plays an important role in the removal of micropollutants, but there remain significant challenges such as concentration polarization, membrane fouling, and variable permeate quality. The work reported here uses a multifunctional membrane with rejection, adsorption, and catalysis functions to solve these problems. On the basis of mussel-inspired chemistry and biological membrane properties, a multifunctional membrane was prepared by applying "reverse filtration" of a laccase solution and subsequent "dopamine coating" on a nanofiltration (NF) membrane support, which was tested on bisphenol A (BPA) removal. Three NF membranes were chosen for the preparation of the multifunctional membranes on the basis of the membrane properties and enzyme immobilization efficiency. Compared with the pristine membrane, the multifunctional membrane exhibited significant improvement of BPA removal (78.21 ± 1.95%, 84.27 ± 7.30%, and 97.04 ± 0.33% for NT103, NF270, and NF90, respectively), all of which are clearly superior to the conventional Fenton treatment (55.0%) under similar conditions and comparable to soluble laccase coupled with NF270 membrane filtration (89.0%). The improvement would appear to be due to a combination of separation (reducing the enzymatic burden), adsorption (enriching the substrate concentration as well as prolonging the residence time), and lastly, catalysis (oxidizing the pollutants and breaking the "adsorption saturation limits"). Furthermore, the synergistic effect of the polydopamine (PDA) layer on the enzymatic oxidation of BPA was confirmed, which was due to its enhanced adsorption and electron transfer performance. The multifunctional membrane could be reused for at least seven cycles with an acceptable activity loss, demonstrating good potential for removal of micropollutants.

Conformational Changes of Enzymes and Aptamers Immobilized on Electrodes

Conformation constitutes a vital property of biomolecules, especially in the cases of enzymes and aptamers, and is essential in defining their molecular recognition ability. When biomolecules are immobilized on electrode surfaces, it is very important to have a control on all the possible conformational changes that may occur, either upon the recognition of their targets or by undesired alterations. Both enzymes and aptamers immobilized on electrodes are susceptible to conformational changes as a response to the nature of the charge of the surface and of the surrounding environment (pH, temperature, ionic strength, etc.). The main goal of this review is to analyze how the conformational changes of enzymes and aptamers immobilized on electrode surfaces have been treated in reports on biosensors and biofuel cells. This topic was selected due to insufficient information found on the actual conformational changes involved in the function of these bioelectrochemical devices despite its importance.

Immobilization of LccC Laccase from Aspergillus nidulans on Hard Surfaces via Fungal Hydrophobins

Fungal hydrophobins are small amphiphilic proteins that can be used for coatings on hydrophilic and hydrophobic surfaces. Through the formation of monolayers, they change the hydrophobicity of a given surface. Especially, the class I hydrophobins are interesting for biotechnology, because their layers are stable at high temperatures and can only be removed with strong solvents. These proteins self-assemble into monolayers under physiological conditions and undergo conformational changes that stabilize the layer structure. Several studies have demonstrated how the fusion of hydrophobins with short peptides allows the specific modification of the properties of a given surface or have increased the protein production levels through controlled localization of hydrophobin molecules inside the cell. Here, we fused the Aspergillus nidulans laccase LccC to the class I hydrophobins DewA and DewB and used the fusion proteins to functionalize surfaces with immobilized enzymes. In contrast to previous studies with enzymes fused to class II hydrophobins, the DewA-LccC fusion protein is secreted into the culture medium. The crude culture supernatant was directly used for coatings of glass and polystyrene without additional purification steps. The highest laccase surface activity was achieved after protein immobilization on modified hydrophilic polystyrene at pH 7. This study presents an easy-to-use alternative to classical enzyme immobilization techniques and can be applied not only for laccases but also for other biotechnologically relevant enzymes.

IMPORTANCE

Although fusion with small peptides to modify hydrophobin properties has already been performed in several studies, fusion with an enzyme presents a more challenging task. Both protein partners need to remain in active form so that the hydrophobins can interact with one another and form layers, and so the enzyme (e.g., laccase) will remain active at the same time. Also, because of the amphiphilic nature of hydrophobins, their production and purification remain challenging so far and often include steps that would irreversibly disrupt most enzymes. In our study, we present the first functional fusion proteins of class I hydrophobins from A. nidulans with a laccase. The resulting fusion enzyme is directly secreted into the culture medium by the fungus and can be used for the functionalization of hard surfaces.

Carbon disulfide mediated self-assembly of Laccase and iron oxide nanoparticles on gold surfaces for biosensing applications

A simple one-step methodology was explored to prepare enzyme-modified nanostructured electrodes for the development of biosensing interfaces. Magnetite type nanoparticles conjugated with Laccase were immobilized on gold surfaces. This approach relies on the reaction between carbon disulfide and amine groups of biomolecules to form dithiocarbamate (DTC) moieties, as well as on the strong affinity between sulfur species and metals. Special emphasis was given to demonstrate DTC formation in aqueous solution and further attachment to iron oxide nanoparticles and to gold electrodes. UV-visible spectroscopy confirmed the functionalization of nanoparticles by DTC using a model secondary amine (N-hexylmethylamine). The direct attachment of modified iron oxide nanoparticles (with ca. 20 or 40nm mean sizes) to gold electrodes was investigated using the hormone epinephrine, with well-known electrochemical properties. A high amount of immobilized epinephrine and a facilitated redox conversion was observed for modified electrodes containing iron oxide nanoparticles. The success of this simple and robust method was confirmed by X-ray photoelectronic spectroscopy. Finally, the catalytic activity of modified gold with iron oxide nanoparticles and Laccase was evaluated toward 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid diammonium salt (ABTS). Chronoamperometric studies revealed a significant catalytic activity of immobilized Laccase in the presence of the nanoparticles, in particular for the largest ones (40nm), with a sensitivity for ABTS oxidation of 100mAM^-1cm^-2.

Nutrient removal and lipid production by Coelastrella sp. in anaerobically and aerobically treated swine wastewater

Coelastrella sp. QY01, a microalgae species isolated from a local pond, was identified and used for the treatment of anaerobically and aerobically treated swine wastewater (AnATSW). Microalgal growth characteristics, nutrient removal and lipid accumulation of QY01 cultivated in the initial concentration of AnATSW ranged from 63 to 319mg NH3-N/L were examined. The specific growth rate of QY01 cultivated in cultures ranged from 0.269 to 0.325day(-1) with a biomass productivity from 42.77 to 57.46mgL(-1)day(-1). Removal rates for NH3-N, TP and inorganic carbon in AnATSW at the various nutrient concentrations ranged from 90% to 100%, from 90% to 100% and from 74% to 78%, respectively. The lipid content of QY01 ranged from 22.4% to 24.8%. The lipid productivity was positive correlation with the biomass productivity. 40% AnATSW was optimal for QY01 cultivation, in which nutrient removal and productivity of biomass and lipid were maximized.

Laccase encapsulation in chitosan nanoparticles enhances the protein stability against microbial degradation

A novel concept with the result of enzyme stabilization against microbial degradation in real bioremediation processes was developed through the encapsulation of laccase in chitosan nanoparticles. Besides of abundant information on laccase-chitosan conjugates, we report the laccase encapsulation into nanoparticles based in chitosan. The chitosan-tripolyphosphate technique was applied for the production of morphologically homogeneous enzymatic nanoparticles, with high enzyme encapsulation efficiency, small asymmetric sizes (from 40 to 90 nm), and rough surfaces. Contrary to macroscopic immobilized enzymes, temperature and pH activity profiles of nano-sized laccase were similar to those of free enzyme. The substrate affinity constant (K M) of nano-encapsulated laccase was similar to these from free enzyme, while its activity rate constant (k cat) represented 60 % of these obtained with free enzyme. Importantly, stability of nano-encapsulated laccase against microbial degradation in soil, compost, and wastewater was significantly increased. After 24 h exposure to wastewater from a treatment plant, the laccase activity of the nanoparticles was 82.8 % of initial activity, compared with only 7.8 % retained activity for free enzyme. After 36 h incubation in compost extract, the laccase nanoparticles showed 72.4 % of the initial activity, while the free enzyme was almost completely inactivated. Finally, after 84 h incubation in soil extract, the nanoparticles and free preparations showed 57.9 and 17.3 % of the initial activity, respectively. Thus, the nanoencapsulation of enzymes able to transform pollutants is an alternative to improve the operational lifetime of enzymes in real environmental applications.

Efficient Enzyme-Free Biomimetic Sensors for Natural Phenol Detection

The development of sensors and biosensors based on copper enzymes and/or copper oxides for phenol sensing is disclosed in this work. The electrochemical properties were studied by cyclic and differential pulse voltammetry using standard solutions of potassium ferrocyanide, phosphate/acetate buffers and representative natural phenols in a wide pH range (3.0 to 9.0). Among the natural phenols herein investigated, the highest sensitivity was observed for rutin, a powerful antioxidant widespread in functional foods and ubiquitous in the plant kingdom. The calibration curve for rutin performed at optimum pH (7.0) was linear in a broad concentration range, 1 to 120 µM (r = 0.99), showing detection limits of 0.4 µM. The optimized biomimetic sensor was also applied in total phenol determination in natural samples, exhibiting higher stability and sensitivity as well as distinct selectivity for antioxidant compounds.

Two Decades of Laccases: Advancing Sustainability in the Chemical Industry

Given the current state of environmental affairs and that our future on this planet as we know it is in jeopardy, research and development into greener and more sustainable technologies within the chemical and forest products industries is at its peak. Given the global scale of these industries, the need for environmentally benign practices is propelling new green processes. These challenges are also impacting academic research and our reagents of interest are laccases. These enzymes are employed in a variety of biotechnological applications due to their native function as catalytic oxidants. They are about as green as it gets when it comes to chemical processes, requiring O₂ as their only co-substrate and producing H₂ O as the sole by-product. The following account will review our twenty year journey on the use of these enzymes within our research group, from their initial use in biobleaching of kraft pulps and for fiber modification within the pulp and paper industry, to their current application as green catalytic oxidants in the field of synthetic organic chemistry.

Removal of metal and organic pollutants from wastewater by a sequential selective technique

In this study the application of a sequential selective system that combined biosorption with biodegradation was evaluated as a feasible process for the removal of Cr(VI) and m-cresol from effluents. Cr(VI) biosorption on pretreated chestnut shells showed 100% metal removal and modelling efforts demonstrated that the pseudo-second order kinetic model and Langmuir isotherm fit well the process behaviour. Thus, the treated stream was an appropriate environment for the biodegradation of m-cresol using a laccase-producer fungus, Phlebia radiata. Two bioreactor configurations, rotating drum and modified-airlift, were studied using the fungus grown on chestnut shells, which act as support-substrate as well as oxidative enzyme inductor increasing the laccase activity up to 1000UL(-1). The best bioreactor, rotating drum, reached 100% removal in 7days. Finally, the best configuration for the sequential selective system was modelled operating in continuous mode by the breakthrough curves generated using FASTv2.0 and the design bioreactor flow model.

Immobilized Lignin Peroxidase-Like Metalloporphyrins as Reusable Catalysts in Oxidative Bleaching of Industrial Dyes

Synthetic and bioinspired metalloporphyrins are a class of redox-active catalysts able to emulate several enzymes such as cytochromes P450, ligninolytic peroxidases, and peroxygenases. Their ability to perform oxidation and degradation of recalcitrant compounds, including aliphatic hydrocarbons, phenolic and non-phenolic aromatic compounds, sulfides, and nitroso-compounds, has been deeply investigated. Such a broad substrate specificity has suggested their use also in the bleaching of textile plant wastewaters. In fact, industrial dyes belong to very different chemical classes, being their effective and inexpensive oxidation an important challenge from both economic and environmental perspective. Accordingly, we review here the most widespread synthetic metalloporphyrins, and the most promising formulations for large-scale applications. In particular, we focus on the most convenient approaches for immobilization to conceive economical affordable processes. Then, the molecular routes of catalysis and the reported substrate specificity on the treatment of the most diffused textile dyes are encompassed, including the use of redox mediators and the comparison with the most common biological and enzymatic alternative, in order to depict an updated picture of a very promising field for large-scale applications.