Iron Catalysis in Organic Synthesis: A Critical Assessment of What It Takes To Make This Base Metal a Multitasking Champion

Efficient Pd-Catalyzed Direct Coupling of Aryl Chlorides with Alkyllithium Reagents

Organolithium compounds are amongst the most important organometallic reagents and frequently used in difficult metallation reactions. However, their direct use in the formation of C-C bonds is less established. Although remarkable advances in the coupling of aryllithium compounds have been achieved, Csp2 -Csp3 coupling reactions are very limited. Herein, we report the first general protocol for the coupling or aryl chlorides with alkyllithium reagents. Palladium catalysts based on ylide-substituted phosphines (YPhos) were found to be excellently suited for this transformation giving high selectivities at room temperature with a variety of aryl chlorides without the need for an additional transmetallation reagent. This is demonstrated in gram-scale synthesis including building blocks for materials chemistry and pharmaceutical industry. Furthermore, the direct coupling of aryllithiums as well as Grignard reagents with aryl chlorides was also easily accomplished at room temperature.

FeCl3-catalyzed oxidative decarboxylation of aryl/heteroaryl acetic acids: preparation of selected API impurities

There is an ever-increasing demand for impurity compounds for use in impurity profiling as regulatory agencies seek information during registration. Herein, we report the FeCl₃-catalyzed oxidative decarboxylation of aryl- and heteroaryl acetic acids to the corresponding carbonyl compounds. A variety of useful aldehydes and ketones were prepared in a simple one-pot transformation by employing an environmentally benign, low-cost, and readily available iron salt. The utility of this method has been demonstrated by preparing five valuable API impurities including a multi-gram-scale synthesis of ketorolac impurity B for the first time.

Iron(ii)-induced cycloisomerization of alkynes via"non-vinylidene" pathways for iron(ii)-indolizine and -indolizinone complexes

Reactions between pyridine-functionalized alkynes and an Fe(ii) precursor supported by 2,5,8-trithia[9](2,9)-1,10-phenanthrolinophane afforded the first Fe(ii)-indolizine and -indolizinone complexes. Structural analysis and theoretical calculations revealed the existence of unconventional "non-vinylidene" pathways and challenged the generality of vinylidene intermediacy in Fe(ii)-induced alkyne transformations.

Reaction Pathways and Redox States in α-Selective Cobalt-Catalyzed Hydroborations of Alkynes

Cobalt(II) alkyl complexes supported by a monoanionic NNN pincer ligand are pre‐catalysts for the regioselective hydroboration of terminal alkynes, yielding the Markovnikov products with α:β‐(E) ratios of up to 97:3. A cobalt(II) hydride and a cobalt(II) vinyl complex appear to determine the main reaction pathway. In a background reaction the highly reactive hydrido species specifically converts to a coordinatively unsaturated cobalt(I) complex which was found to re‐enter the main catalytic cycle.

Iron-Catalyzed Regiodivergent Alkyne Hydrosilylation

Although tremendous effort has been devoted to the development of methods for iron catalysis, few of the catalysts reported to date exhibit clear superiority to other metal catalysts, and the mechanisms of most iron catalysis remain unclear. Herein, we report that iron complexes bearing 2,9-diaryl-1,10-phenanthroline ligands exhibit not only unprecedented catalytic activity but also unusual ligand-controlled divergent regioselectivity in hydrosilylation reactions of various alkynes. The hydrosilylation protocol described herein provides a highly efficient method for preparing useful di- and trisubstituted olefins on a relatively large scale under mild conditions, and its use markedly improved the synthetic efficiency of a number of bioactive compounds. Mechanistic studies based on control experiments and density functional theory calculations were performed to understand the catalytic pathway and the observed regioselectivity.

Facile H/D Exchange at (Hetero)Aromatic Hydrocarbons Catalyzed by a Stable Trans-Dihydride N-Heterocyclic Carbene (NHC) Iron Complex

Earth-abundant metal pincer complexes have played an important role in homogeneous catalysis during the last ten years. Yet, despite intense research efforts, the synthesis of iron PC_carbeneP pincer complexes has so far remained elusive. Here we report the synthesis of the first PC_NHCP functionalized iron complex [(PC_NHCP)FeCl₂] (1) and the reactivity of the corresponding trans-dihydride iron(II) dinitrogen complex [(PC_NHCP)Fe(H)₂N₂)] (2). Complex 2 is stable under an atmosphere of N₂ and is highly active for hydrogen isotope exchange at (hetero)aromatic hydrocarbons under mild conditions (50 °C, N₂). With benzene-d₆ as the deuterium source, easily reducible functional groups such as esters and amides are well tolerated, contributing to the overall wide substrate scope (e.g., halides, ethers, and amines). DFT studies suggest a complex assisted σ-bond metathesis pathway for C(sp²)–H bond activation, which is further discussed in this study.

TMEDA in Iron-Catalyzed Hydromagnesiation: Formation of Iron(II)-Alkyl Species for Controlled Reduction to Alkene-Stabilized Iron(0)

N,N,N',N'-Tetramethylethylenediamine (TMEDA) has been one of the most prevalent and successful additives used in iron catalysis, finding application in reactions as diverse as cross-coupling, C-H activation, and borylation. However, the role that TMEDA plays in these reactions remains largely undefined. Herein, studying the iron-catalyzed hydromagnesiation of styrene derivatives using TMEDA has provided molecular-level insight into the role of TMEDA in achieving effective catalysis. The key is the initial formation of TMEDA-iron(II)-alkyl species which undergo a controlled reduction to selectively form catalytically active styrene-stabilized iron(0)-alkyl complexes. While TMEDA is not bound to the catalytically active species, these active iron(0) complexes cannot be accessed in the absence of TMEDA. This mode of action, allowing for controlled reduction and access to iron(0) species, represents a new paradigm for the role of this important reaction additive in iron catalysis.

Two-State Reactivity in Iron-Catalyzed Alkene Isomerization Confers σ-Base Resistance

A low-coordinate, high spin (S = 3/2) organometallic iron(I) complex is a catalyst for the isomerization of alkenes. A combination of experimental and computational mechanistic studies supports a mechanism in which alkene isomerization occurs by the allyl mechanism. Importantly, while substrate binding occurs on the S = 3/2 surface, oxidative addition to an η¹-allyl intermediate only occurs on the S = 1/2 surface. Since this spin state change is only possible when the alkene substrate is bound, the catalyst has high immunity to typical σ-base poisons due to the antibonding interactions of the high spin state.

Tackling N-Alkyl Imines with 3d Metal Catalysis: Highly Enantioselective Iron-Catalyzed Synthesis of α-Chiral Amines

A readily activated iron alkyl precatalyst effectively catalyzes the highly enantioselective hydroboration of N-alkyl imines. Employing a chiral bis(oxazolinylmethylidene)isoindoline pincer ligand, the asymmetric reduction of various acyclic N-alkyl imines provided the corresponding α-chiral amines in excellent yields and with up to >99 % ee. The applicability of this base metal catalytic system was further demonstrated with the synthesis of the pharmaceuticals Fendiline and Tecalcet.

Recent Advances in Asymmetric Iron Catalysis

Asymmetric transition-metal catalysis represents a fascinating challenge in the field of organic chemistry research. Since seminal advances in the late 60s, which were finally recognized by the Nobel Prize to Noyori, Sharpless and Knowles in 2001, the scientific community explored several approaches to emulate nature in producing chiral organic molecules. In a scenario that has been for a long time dominated by the use of late-transition metals (TM) catalysts, the use of 3d-TMs and particularly iron has found, recently, a widespread application. Indeed, the low toxicity and the earth-abundancy of iron, along with its chemical versatility, allowed for the development of unprecedented and more sustainable catalytic transformations. While several competent reviews tried to provide a complete picture of the astounding advances achieved in this area, within this review we aimed to survey the latest achievements and new concepts brought in the field of enantioselective iron-catalyzed transformations.

An Iron(III) Complex with Pincer Ligand—Catalytic Water Oxidation through Controllable Ligand Exchange

Pincer ligands occupy three coplanar sites at metal centers and often support both stability and reactivity. The five-coordinate [FeIIICl2(tia-BAI)] complex (tia-BAI− = 1,3-bis(2’-thiazolylimino)isoindolinate(−)) was considered as a potential pre-catalyst for water oxidation providing the active form via the exchange of chloride ligands to water molecules. The tia-BAI− pincer ligand renders water-insolubility to the Fe–(tia-BAI) assembly, but it tolerates the presence of water in acetone and produces electrocatalytic current in cyclic voltammetry associated with molecular water oxidation catalysis. Upon addition of water to [FeIIICl2(tia-BAI)] in acetone the changes in the Fe3+/2+ redox transition and the UV-visible spectra could be associated with solvent-dependent equilibria between the aqua and chloride complex forms. Immobilization of the complex from methanol on indium-tin-oxide (ITO) electrode by means of drop-casting resulted in water oxidation catalysis in borate buffer. The O2 detected by gas chromatography upon electrolysis at pH 8.3 indicates >80% Faraday efficiency by a TON > 193. The investigation of the complex/ITO assembly by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS) before and after electrolysis, and re-dissolution tests suggest that an immobilized molecular catalyst is responsible for catalysis and de-activation occurs by depletion of the metal.

A DFT Study on FeI/FeII/FeIII Mechanism of the Cross-Coupling between Haloalkane and Aryl Grignard Reagent Catalyzed by Iron-SciOPP Complexes

To explore plausible reaction pathways of the cross-coupling reaction between a haloalkane and an aryl metal reagent catalyzed by an iron–phosphine complex, we examine the reaction of FeBrPh(SciOPP) 1 and bromocycloheptane employing density functional theory (DFT) calculations. Besides the cross-coupling, we also examined the competitive pathways of β-hydrogen elimination to give the corresponding alkene byproduct. The DFT study on the reaction pathways explains the cross-coupling selectivity over the elimination in terms of Fe^I/Fe^II/Fe^III mechanism which involves the generation of alkyl radical intermediates and their propagation in a chain reaction manner. The present study gives insight into the detailed molecular mechanic of the cross-coupling reaction and revises the Fe^II/Fe^II mechanisms previously proposed by us and others.

An unsymmetrical binuclear iminopyridine-iron complex and its catalytic isoprene polymerization

A series of chloride-bridged unsymmetrical mixed Fe(ii)-HS/Fe(ii)-LS binuclear structures has been prepared and characterized. Upon activation with MAO, highly efficient catalytic polymerization of isoprene was achieved, delivering an ultra-high molecular weight (catalyst loading = 2.5 ppm, Mn = 1.8 × 106 g mol-1, Mw/Mn = 1.4).

Synthesis of 2-aryl quinazolinones via iron-catalyzed cross-dehydrogenative coupling (CDC) between N-H and C-H bonds

Herein, we describe the direct synthesis of quinazolinones via cross-dehydrogenative coupling between methyl arenes and anthranilamides. The C-H functionalization of the benzylic sp3 carbon is achieved by di-t-butyl peroxide under air, and the subsequent amination-aerobic oxidation process completes the annulation process. Iron catalyzed the whole reaction process and various kinds of functional groups were tolerated under the reaction conditions, providing 31 examples of 2-aryl quinazolinones using methyl arene derivatives in yields of 57-95%. The synthetic potential has been demonstrated by the additional synthesis of aryl-containing heterocycles.

Cobalt-Catalyzed Cross-Couplings between Alkyl Halides and Grignard Reagents

Metal-catalyzed cross-couplings have emerged as essential tools for the construction of C-C bonds. The identification of efficient catalytic systems as well as large substrate scope made these cross-couplings key reactions to access valuable molecules ranging from materials, agrochemicals to active pharmaceutical ingredients. They have been increasingly integrated in retrosynthetic plans, allowing shorter and original route development. Palladium-catalyzed cross-couplings still largely rule the field, with the most popular reactions in industrial processes being the Suzuki and Sonogashira couplings. However, the extensive use of palladium complexes raises several problems such as limited resources, high cost, environmental impact, and frequent need for sophisticated ligands. As a consequence, the use of nonprecious and cheap metal catalysts has appeared as a new horizon in cross-coupling development. Over the last three decades, a growing interest has thus been devoted to Fe-, Co-, Cu-, or Ni-catalyzed cross-couplings. Their natural abundance makes them cost-effective, allowing the conception of more sustainable and less expensive chemical processes, especially for large-scale production of active molecules. In addition to these economical and environmental considerations, the 3d metal catalysts also exhibit complementary reactivity with palladium complexes, facilitating the use of alkyl halide partners due to the decrease of β-elimination side reactions. In particular, by using cobalt catalysts, numerous cross-couplings between alkyl halides and organometallics have been described. However, cobalt catalysis still stays far behind palladium catalysis in terms of popularity and applications, and the expansion of the substrate scope as well as the development of simple and robust catalytic systems remains an important challenge.In 2012, our group entered the cobalt catalysis field by developing a cobalt-catalyzed cross-coupling between C-bromo glycosides and Grignard reagents. The generality of the coupling allowed the preparation of a range of valuable C-aryl and C-vinyl glycoside building blocks. We then focused on the functionalization of saturated N-heterocycles, and a variety of halo-azetidines, -pyrrolidines, and -piperidines were successfully reacted with aryl and alkenyl Grignard reagents under cobalt catalysis. With the objective of preparing valuable α-aryl amides, a cobalt-catalyzed cross-coupling applied to α-bromo amides was studied and then extended to α-bromo lactams. Recently, we also reported an efficient and general cross-coupling involving cyclopropyl- and cyclobutyl-magnesium bromides. This method allows the alkylation of functionalized small strained rings by a range of primary and secondary alkyl halides.

Allenes for Versatile Iron-Catalyzed C-H Activation by Weak O-Coordination: Mechanistic Insights by Kinetics, Intermediate Isolation, and Computation

The iron-catalyzed hydroarylation of allenes was accomplished by weak phenone assistance. The C-H activation proceeded with excellent efficacy and high ortho-regioselectivity in proximity to the weakly coordinating carbonyl group for a range of substituted phenones and allenes. Detailed mechanistic studies, including the isolation of key intermediates, the structural characterization of an iron-metallacycle, and kinetic analysis, allowed the sound elucidation of a plausible catalytic working mode. This mechanistic rationale is supported by detailed computational density functional theory studies, which fully address multi-spin-state reactivity. Furthermore, in operando nuclear magnetic resonance monitoring of the catalytic reaction provided detailed insights into the mode of action of the iron-catalyzed C-H alkylation with allenes.

Fe(iii)-Catalyzed synthesis of steroidal imidazoheterocycles as potent antiproliferative agents

An efficient and practical method has been developed for the synthesis of steroidal imidazoheterocycles via cost-effective and environmentally benign FeCl₃-catalyzed oxidative amination. A library of steroidal imidazo[1,2-a]pyridines was directly synthesized from readily available 2-aminopyridines and steroidal ketones in aerobic conditions. The synthesized compounds were screened for activity on human microsomal cytochrome P450s CYP7, CYP17 and CYP21. Antiproliferative activity of two lead compounds 3ia and 3la was additionally evaluated against the human MCF-7 (breast cancer), SKOV3 (ovarian cancer), and 22Rv1 (prostate cancer) cell lines. Steroidal imidazo[1,2-a]pyridine 3la which is a substrate molecule for CYP17A1 with IC₅₀ = 1.7 μM (MCF-7), 3.0 (SKOV3), and 6.0 μM (22Rv1) has proved to be more active than reference drug cisplatin.

Synthesis and characterization of heterometallic complexes involving coinage metals and isoelectronic Fe(CO)5, [Mn(CO)5]- and [Fe(CO)4CN]- ligands

The chemistry of coinage metal ions with Fe(CO)₅, [Mn(CO)₅]^- and [Fe(CO)₄CN]^- has been explored using Mes₃P and N-heterocyclic carbene supporting ligands. A comparison of [(SIPr)Au-Fe(CO)₅][SbF₆], [(^Et2CAAC)Au-Fe(CO)₅][SbF₆] and [(Mes₃P)Au-Fe(CO)₅][SbF₆] shows that the ligand donor strength towards Au(i) follows the order Mes₃P > ^Et2CAAC > SIPr. These Fe(CO)₅ complexes show significant blue shifts in [small nu, Greek, macron]_CO bands relative to those observed for free Fe(CO)₅ as a result of it serving as a net electron donor to Au(i). Au(i) is a much stronger acceptor in (SIPr)Au-Mn(CO)₅ compared to Ag(i) in (SIPr)Ag-Mn(CO)₅. The structural details of Mes₃PAu-Mn(CO)₅ are also presented. [Fe(CO)₄CN]^- afforded CN bridged coinage metal complexes with (IPr*)Au⁺, (SIPr)Ag⁺ and (SIPr)Cu⁺ moieties, rather than molecules with direct Fe/coinage metal bonds. The computed total interaction energies indicate that both [Mn(CO)₅]^- and [Fe(CO)₄CN]^- are stronger donors toward Au(i) than Fe(CO)₅. A detailed analysis of the bonding interactions between the coinage metal ions and Fe(CO)₅, [Mn(CO)₅]^- and [Fe(CO)₄CN]^- suggests that the largest contribution comes from electrostatic attraction, while the covalent component follows the Dewar-Chatt-Duncanson model. The σ-donor interactions of these organometallic ligands with coinage metal ions are considerably stronger than the π-backbonding from the coinage metal ions.

The enzyme-induced formation of iron hybrid nanostructures with different morphologies

A new synthesis method for tailor-made iron-hybrid nanoparticles has been carried out for the first time using enzymes, which directly induce the formation of inorganic iron species. The role of the protein was critical for the formation and morphology of the iron nanostructures and, depending on the enzyme, by simple mixing with ammonium iron(ii) sulfate at room temperature and under air, it was possible to obtain, for the first time, well stabilized superparamagnetic iron and iron oxide nanorods, nanosheets and nanorings or even completely amorphous non-magnetic iron structures in the protein network. These iron nanostructure-enzyme hybrids showed excellent results as heterogeneous catalysts in organic chemistry (chemoselective hydrogenation and C-C bonding formation) and environmental remediation processes.

Iron-Catalyzed Acceptorless Dehydrogenative Coupling of Alcohols With Aromatic Diamines: Selective Synthesis of 1,2-Disubstituted Benzimidazoles

Benzimidazoles are important N-heteroaromatic compounds with various biological activities and pharmacological applications. Herein, we present the first iron-catalyzed selective synthesis of 1,2-disubstituted benzimidazoles via acceptorless dehydrogenative coupling of primary alcohols with aromatic diamines. The tricarbonyl (η4-cyclopentadienone) iron complex catalyzed dehydrogenative cyclization, releasing water and hydrogen gas as by-products. The earth abundance and low toxicity of iron metal enable the provision of an eco-friendly and efficient catalytic method for the synthesis of benzimidazoles.

Iron/N-doped graphene nano-structured catalysts for general cyclopropanation of olefins

An Fe-based heterogeneous catalyst allows for the synthesis of cyclopropanes via a carbene transfer reaction, a transformation usually belonging to the homogeneous domain.

The first examples of heterogeneous Fe-catalysed cyclopropanation reactions are presented. Pyrolysis of in situ-generated iron/phenanthroline complexes in the presence of a carbonaceous material leads to specific supported nanosized iron particles, which are effective catalysts for carbene transfer reactions. Using olefins as substrates, cyclopropanes are obtained in high yields and moderate diastereoselectivities. The developed protocol is scalable and the activity of the recycled catalyst after deactivation can be effectively restored using an oxidative reactivation protocol under mild conditions.

An Iron Pincer Complex in Four Oxidation States

The synthesis and characterization of a series of homoleptic iron complexes [Fe(^benzNHCOCO)₂]^2-/1-/0/1+ supported by the tridentate bis-aryloxide benzimidazolin-2-ylidene pincer ligand ^benzNHCOCO^2- (II) is presented. While the reaction of 2 equiv of free ligand II with a ferrous iron precursor leads to the isolation of the coordination polymer [Fe(^benzNHCOCOK)₂]_n (1), treatment of II with ferric iron salts allows for the synthesis and isolation of the mononuclear, octahedral bis-pincer compound K[Fe(^benzNHCOCO)₂] (2) and its crown-ether derivative [K(18c6)(THF)₂][Fe(^benzNHCOCO)₂] (3). Electrochemical studies of 2 suggested stable products upon further one- and two-electron oxidation. Hence, treatment of 2 with 1 equiv of AgPF₆ yields the charge-neutral species [Fe(^benzNHCOCO)₂] (4). Similarly, the cationic complex [Fe(^benzNHCOCO)₂]PF₆ (5) is obtained by addition of 2 equiv of AgPF₆. The characterization of complexes 1, 3, and 4 reveals iron-centered reduction and oxidation processes; thus, preserving the dianionic, closed-shell structure of both coordinated ^benzNHCOCO pincer chelates, II. This implies a stabilization of a highly Lewis acidic iron(IV) center by four phenolate anions rather than charge distribution across the ligand framework with a lower formal oxidation state at iron. Notably, the overall charge-neutral iron(IV) complex undergoes reductive elimination of the pincer ligand, providing a metal-free compound that can be described as a spirocyclic imidazolone ketal (6). In contrast, the ligand-metal bonds in 5, formally an iron(V) complex, are considerably covalent, rendering the assignment of its oxidation state challenging, if not impossible. All compounds are fully characterized, and the complexes' electronic structures were studied with a variety of spectroscopic and computational methods, including single-crystal X-ray diffraction (SC-XRD), X-band electron paramagnetic resonance (EPR), and zero-field ⁵⁷Fe Mössbauer spectroscopy, variable-field and variable-temperature superconducting quantum interference device (SQUID) magnetization measurements, and multi-reference ab initio (NEVPT2/CASSCF) as well as density functional theory (DFT) studies. Taken altogether, the electronic structure of 5 is best described as an iron(IV) center antiferromagnetically coupled to a ligand-centered radical.

Few-layer Black Phosphorous Catalyzes Radical Additions to Alkenes Faster than Low-valence Metals

The substitution of catalytic metals by p-block main elements has a tremendous impact not only in the fundamentals but also in the economic and ecological fingerprint of organic reactions. Here we show that few-layer black phosphorous (FL-BP), a recently discovered and now readily available 2D material, catalyzes different radical additions to alkenes with an initial turnover frequency (TOF0) up to two orders of magnitude higher than representative state-of-the-art metal complex catalysts at room temperature. The corresponding electron-rich BP intercalation compound (BPIC) KP6 shows a nearly twice TOF0 increase with respect to FL-BP. This increase in catalytic activity respect to the neutral counterpart also occurs in other 2D materials (graphene vs. KC8) and metal complex catalysts (Fe0 vs. Fe2- carbon monoxide complexes). This reactive parallelism opens the door for cross-fertilization between 2D materials and metal catalysts in organic synthesis.

Iron-Catalyzed C-H Functionalizations under Triazole-Assistance

3d transition metals-catalyzed C-H bond functionalizations represent nowadays an important tool in organic synthesis, appearing as the most promising alternative to cross-coupling reactions. Among 3d transition metals, iron found widespread application due to its availability and benign nature, and it was established as an efficient catalyst in organic synthesis. In this context, the use of ortho-orientating directing groups (DGs) turned out to be necessary for promoting selective iron-catalyzed C-H functionalization reactions. Very recently, triazoles DGs were demonstrated to be more than an excellent alternative to the commonly employed 8-aminoquinoline (AQ) DG, as a result of their modular synthesis as well as the mild reaction conditions applied for their removal. In addition, their tunable geometry and electronics allowed for new unprecedented reactivities in iron-catalyzed C-H activation methodologies that will be summarized within this review.

Cobaltaelectro-catalyzed C-H activation for resource-economical molecular syntheses

The direct cleavage of otherwise inert C-H bonds has emerged as a sustainable approach for organic synthesis; in contrast to other approaches, these reactions result in the formation of fewer undesired by-products and do not require pre-functionalization steps. In recent years, oxidative C-H/N-H alkyne annulations and C-H oxygenations were realized by 3d metals. Unfortunately, most of these reactions require stoichiometric amounts of often toxic chemical oxidants. This protocol provides a general method for cobaltaelectro-catalyzed C-H activations of benzamides. Here, anodic oxidation obviates the need for a chemical oxidant and uses 10-20% of a more environmentally benign, inexpensive catalyst. We outline a detailed and precise description of the designed electrolytic cell for metallaelectrocatalysis, including readily available electrode materials and electrode holders. The custom-made device is further compared with the commercially available and standardized ElectraSyn 2.0 electrochemistry kit. As example applications of this approach, we describe cobaltaelectro-catalyzed C-H activation protocols for the direct C-H oxygenation of benzamides and resource-economical synthesis of isoquinolones. The cobaltaelectrocatalysis setup and reaction take about 17 h, while an additional 5 h have to be anticipated for workup and chromatographic purification. The methods described herein feature broad functional group tolerance, operational simplicity, low waste-product formation and an overall exceptional level of resource economy.

Iron-Catalyzed Synthesis, Structure, and Photophysical Properties of Tetraarylnaphthidines

We describe the synthesis and photophysical properties of tetraarylnaphthidines. Our synthetic approach is based on an iron-catalyzed oxidative C-C coupling reaction as the key step using a hexadecafluorinated iron-phthalocyanine complex as a catalyst and air as the sole oxidant. The N,N,N',N'-tetraarylnaphthidines proved to be highly fluorescent with quantum yields of up to 68%.

On the Use of Iron in Organic Chemistry

Transition metal catalysis in modern organic synthesis has largely focused on noble transition metals like palladium, platinum and ruthenium. The toxicity and low abundance of these metals, however, has led to a rising focus on the development of the more sustainable base metals like iron, copper and nickel for use in catalysis. Iron is a particularly good candidate for this purpose due to its abundance, wide redox potential range, and the ease with which its properties can be tuned through the exploitation of its multiple oxidation states, electron spin states and redox potential. This is a fact made clear by all life on Earth, where iron is used as a cornerstone in the chemistry of living processes. In this mini review, we report on the general advancements in the field of iron catalysis in organic chemistry covering addition reactions, C-H activation, cross-coupling reactions, cycloadditions, isomerization and redox reactions.