In situ construction of g-C3N4/g-C3N4 metal-free heterojunction for enhanced visible-light photocatalysis

Facile synthesis of N/B-double-doped Mn2O3 and WO3 nanoparticles for dye degradation under visible light

In the present work, nitrogen-doped and nitrogen-boron-double-doped manganese oxide (Mn₂O₃) and tungsten oxide (WO₃) nanoparticles were synthesized using precipitation-hydrothermal method for methylene blue degradation under visible light. Materials were characterized using X-ray diffraction (XRD) analysis, Scanning electron microscopy, Energy dispersive X-ray spectroscopy and UV-vis spectroscopy. Results showed that N and B were successfully incorporated into the crystal lattices of Mn₂O₃ and WO₃. XRD showed that WO₃ was crystallized in the form of a monoclinic lattice, while cubic Mn₂O₃ was produced in the cubic form. The crystallite size was found to be decreased due to the substitution of N and B elements which reveals their roles to accelerate the crystal nucleation rate resulting in the decreased size. On the other hand, single and double doping has successfully narrowed the band gaps of the as-synthesised metal oxide photocatalysts resulting in better absorption in the visible light. Band gaps obtained were as follows: 3.02, 2.50, 1.73 and 1.77 eV for N-WO₃ N/B-WO₃, N-Mn₂O₃ and N/B-Mn₂O₃ respectively. Photocatalytic experiments showed that all as-synthesised materials exhibited a photocatalytic efficiency under visible light ≥420 nm. The degradation efficiency of methylene blue (MB) was in the following order: N-B-co-doped metal oxides > N-doped metal oxides > metal oxides. The presence of scavenger molecules such as isopropanol, EDTA-2Na and benzoquinone inhibited MB degradation. Finally, the results showed that these materials can be reused several times without a notable decrease in efficiency.

Synthesis and Characterization of Efficient ZnO/g-C3N4 Nanocomposites Photocatalyst for Photocatalytic Degradation of Methylene Blue

We examine the photocatalytic activity (PCA) of ZnO/graphitic carbon nitride g-C3N4 (g-CN) composite material for methylene blue (MB) degradation under visible-light irradiation (VLI). The polymeric g-CN materials were fabricated by the pyrolysis of urea and thiourea. More importantly, ZnO/g-CN nanostructured composites were fabricated by adding the different mounts (60, 65, 70, and 75 wt.%) of g-CN into ZnO via the simple hydrothermal process. Among fabricated composites, the 75% ZnO/g-CN nanocomposites displayed a superior PCA for MB degradation, which were ~three-fold an enhancement over the pure ZnO nanoparticles. The fabricated materials have been evaluated by X-ray diffraction (XRD), UV-Vis, Fourier transform infrared (FT-IR) spectroscopy, and electron microscopy. More importantly, the photodegradation of MB could get 98% in ZnO/g-CN could be credited to efficient separation of photo-induced charge carriers between ZnO and g-CN. Also, the recycling efficiency of the as-prepared composites was studied for multiple cycles, which shows that the photocatalysts are stable and suitable to carry out photocatalytic degradation in the logistic mode. Additionally, the probable photocatalytic mechanism has also discussed. The synthetic procedure of ZnO/g-CN based materials can be used in numerous fields such as environmental and in energy storage applications.

Self-cleaning isotype g-C3N4 heterojunction for efficient photocatalytic reduction of hexavalent uranium under visible light

Photocatalysis is a promising method to eliminate hexavalent uranium (U(Ⅵ)) and recycle it from wastewater. However, most of researched photocatalysts are metal-contained, inactive in visible light, and inconvenient to recycle, which unfortunately impedes the further utilization of photocatalytic technology in U(Ⅵ) pollution treatment. Herein, g-C₃N₄ isotype heterojunction with interpenetrated tri-s-triazine structure (ipCN) was prepared by inserting urea into the interlayer of tri-s-triazine planes of thiourea-derived g-C₃N₄ and in-site thermal treating. The synthesized nanocomposites were used to convert soluble U(Ⅵ) ions into U(Ⅳ) sediment under visible light. Experimental and characterization results reveal that ipCN possess larger BET surface area, more negative-charged surface, higher U(Ⅵ) adsorption capability, and more efficient mass diffusion and charges transfer properties. With these excellent characteristics, nearly 98% U(Ⅵ) could be removed within 20 min over ipCN_5:1 and 92% photoreduction efficiency could also be kept after 7 cycle uses, which were equal to or even superior than most reported metal-based photocatalysts. It is also proven that the configuration of U(Ⅵ) and photogenerated ·O₂^- play a significant role in the photocatalytic U(Ⅵ) reduction process, with (UO₂)_x(OH)_y^2x-y are more prone to be adsorbed and the photoinduced process of ·O₂^- will steal electrons from photocatalysts. Furthermore, with the self-generated ·O₂^- and H₂O₂, a green and facile regeneration process of photocatalysts was proposed This work provides a promising scheme to extract U(Ⅵ) from the perspectives of photocatalysts exploitation, photocatalytic reduction, and photocatalysts regeneration, which is meaningful for the sustainable U(Ⅵ) resource recovery and U(Ⅵ) pollution purification.

Synthesis of Sulfur-Doped 2D Graphitic Carbon Nitride Nanosheets for Efficient Photocatalytic Degradation of Phenol and Hydrogen Evolution

Sulfur-doped two-dimensional (2D) graphitic carbon nitride nanosheets (2D-SCN) with efficient photocatalytic activity were synthesized via (1) polycondensation of thiourea to form bulk sulfur-doped graphitic carbon nitride (SCN) and (2) followed by thermal oxidative treatment of the prepared SCN via an etching strategy to form 2D-SCN. Sulfur was doped in situ into SCN by using thiourea as the precursor, and the 2D nanosheet structure was obtained during the thermal oxidative etching process. The structural, morphological, and optical properties of the 2D-SCN sample were investigated in detail. Herein, it is shown that the thermal oxidative etching treatment and sulfur doping induced a 2D nanosheet structure (2D-SCN-3h) with a thickness of about 4.0 nm and exposure of more sulfur elements on the surface. The surface area increased from 16.6 m²/g for SCN to 226.9 m²/g. Compared to bulk SCN, a blue shift of the absorption peaks was observed for the obtained 2D-SCN-3h photocatalyst, and the absorption intensity was higher than that of the sulfur-free counterpart (2D-CN). The successful in situ doping of S element into SCN or 2D-SCN-3h samples is beneficial to the introduction of surface N defects and O species. 2D-SCN-3h indicated higher efficiency in photogenerated charge carrier separation and showed the highest reductive activity in photocatalytic splitting of water at a rate of 127.4 μmol/h under simulated solar light irradiation, which was 250 times and 3 times higher than that of SCN and 2D-CN photocatalysts, respectively. The apparent quantum efficiency was estimated to be 8.35% at 420 nm irradiation. The S-C-N bond formed by sulfur doping was beneficial to the charge-transfer process, and this led to higher photocatalytic activity according to partial density of state analysis computed by first-principles methods.

A novel synthetic carbon and oxygen doped stalactite-like g-C3N4 for broad-spectrum-driven indometacin degradation

Achieving efficient solar utilization is a primary goal in the field of photocatalytic degradation of PPCPs. For this study, a broad-spectrum carbon and oxygen doped, porous g-C₃N₄ (COCN) was synthesized via a simple co-pyrolysis of dicyandiamide and methylamine hydroiodide (CH₅N·HI). The 0.3COCN demonstrated an excellent photocatalytic degradation of indometacin (IDM), which was 5.9 times higher than bulk g-C₃N₄. The enhanced photocatalytic activity could be ascribed to the broad-spectrum utilization of solar light and improved charge separation efficiency. Reactive species (RSs) scavenging experiments have shown that O₂^·- and ¹O₂ were the dominant active species. Further, the 0.3COCN exhibits excellent yield of hydroxyl radicals which was confirmed by electron spin resonance (ESR) spectra. Meanwhile, the degradation pathways of IDM were proposed according the HRAM LC-MS/MS and total organic carbon (TOC). This research provided a new strategy for a broad-spectrum photocatalyst, and a promising strategy for environmental remediation.

Structural-Phase Catalytic Redox Reactions in Energy and Environmental Applications

The structure-property engineering of phase-based materials for redox-reactive energy conversion and environmental decontamination nanosystems, which are crucial for achieving feasible and sustainable energy and environment treatment technology, is discussed. An exhaustive overview of redox reaction processes, including electrocatalysis, photocatalysis, and photoelectrocatalysis, is given. Through examples of applications of these redox reactions, how structural phase engineering (SPE) strategies can influence the catalytic activity, selectivity, and stability is constructively reviewed and discussed. As observed, to date, much progress has been made in SPE to improve catalytic redox reactions. However, a number of highly intriguing, unresolved issues remain to be discussed, including solar photon-to-exciton conversion efficiency, exciton dissociation into active reductive/oxidative electrons/holes, dual- and multiphase junctions, selective adsorption/desorption, performance stability, sustainability, etc. To conclude, key challenges and prospects with SPE-assisted redox reaction systems are highlighted, where further development for the advanced engineering of phase-based materials will accelerate the sustainable (active, reliable, and scalable) production of valuable chemicals and energy, as well as facilitate environmental treatment.

Precursor-Engineering Coupled Microwave Molten-Salt Strategy Enhances Photocatalytic Hydrogen Evolution Performance of g-C3 N4 Nanostructures

A precursor-engineering strategy coupled with a microwave molten-salt process (PE-MWMS) is developed to synthesize graphitic carbon nitride (g-C₃ N₄ ) with an isotype triazine/heptazine-based g-C₃ N₄ heterojunction as a photocatalyst for the hydrogen evolution reaction (HER) under visible light illumination. Four hybrid precursor combinations-thiourea/melamine, thiourea/dicyandiamide, urea/melamine, and urea/dicyandiamide-are used to synthesize g-C₃ N₄ heterojunctions by the PE-MWMS process. Control experiments indicate that the precursor components and microwave treatment have a great effect on the HER performance of the g-C₃ N₄ samples. Samples synthesized with the optimal molar ratios of thiourea/melamine (2:1), thiourea/dicyandiamide (2:1), urea/melamine (3:1), and urea/dicyandiamide (3:1), exhibit the highest HER rates of 3135, 2519, 2844, and 2565 μmol g^-1  h^-1 , respectively. The amounts of heptazine and triazine units in the g-C₃ N₄ samples can be easily adjusted by changing the ratios of the hybrid precursors and play a decisive role in improving the photocatalytic HER activity. Because of the unique composition and microstructure, the efficient separation of electron-hole pairs, the broadened photo-absorption edges, and the narrowed band gaps, the as-obtained triazine/heptazine-based g-C₃ N₄ nanostructures exhibit promising activity for HER application.

Influence of C3N4 Precursors on Photoelectrochemical Behavior of TiO2/C3N4 Photoanode for Solar Water Oxidation

Photoelectrochemical water splitting is considered as a long-term solution for the ever-increasing energy demands. Various strategies have been employed to improve the traditional TiO2 photoanode. In this study, TiO2 nanorods were decorated by graphitic carbon nitride (C3N4) derived from different precursors such as thiourea, melamine, and a mixture of thiourea and melamine. Photoelectrochemical activity of TiO2/C3N4 photoanode can be modified by tuning the number of precursors used to synthesize C3N4. C3N4 derived from the mixture of melamine and thiourea in TiO2/C3N4 photoanode showed photocurrent density as high as 2.74 mA/cm2 at 1.23 V vs. RHE. C3N4 synthesized by thiourea showed particle-like morphology, while melamine and melamine with thiourea derived C3N4 yielded two dimensional (2D) nanosheets. Nanosheet-like C3N4 showed higher photoelectrochemical performance than that of particle-like nanostructures as specific surface area, and the redox ability of nanosheets are believed to be superior to particle-like nanostructures. TiO2/C3N4 displayed excellent photostability up to 20 h under continuous illumination. Thiourea plays an important role in enhancing the photoelectrochemical performance of TiO2/C3N4. This study emphasizes the fact that the improved photoelectrochemical performance can be achieved by varying the precursors of C3N4 in TiO2/C3N4 heterojunction. This is the first report to show the influence of C3N4 precursors on photoelectrochemical performance in TiO2/C3N4 systems. This would pave the way to explore different precursors influence on C3N4 with respect to the photoelectrochemical response of TiO2/C3N4 heterojunction photoanode.

Quench-Type Electrochemiluminescence Immunosensor Based on Resonance Energy Transfer from Carbon Nanotubes and Au-Nanoparticles-Enhanced g-C3N4 to CuO@Polydopamine for Procalcitonin Detection

A new type of sandwich electrochemiluminescence (ECL) immunosensor dependent on ECL resonance energy transfer (ECL-RET) to achieve sensitive detection of procalcitonin (PCT) has been designed. In brief, carbon nanotubes (CNT) and Au-nanoparticles-functionalized graphitic carbon nitride (g-C₃N₄-CNT@Au) and CuO nanospheres covered with polydopamine (PDA) layer (CuO@PDA) were synthesized and applied as ECL donor and receptor, respectively. g-C₃N₄-CNT nanomaterials were in situ prepared on the basis of π-π conjugation, and the CNT content in the composite were optimized to achieve a strong and stable ECL signal. At the same time, Au nanoparticles were used to functionalize g-C₃N₄-CNT to further increase the ECL intensity and the loading amount of primary antibody (Ab₁). Moreover, CuO@PDA was first used to successfully quench the ECL signal of g-C₃N₄-CNT@Au. Under the optimum experimental conditions, the linear detection range for PCT concentration was within 0.0001-10 ng mL^-1 and the detection limit was 25.7 fg mL^-1 (S/N = 3). Considering prominent specificity, reproducibility, and stability, the prepared immunosensor was used to assess recovery rate of PCT in human serum according to the standard addition method and the result was satisfactory. In addition, it is worth mentioning that a novel ECL-RET pair of g-C₃N₄-CNT@Au (donor)/CuO@PDA (acceptor) was first developed, which offered an effective analytical tool for sensitive detection of biomarkers in early disease diagnostics.

Supramolecular Copolymerization Strategy for Realizing the Broadband White Light Luminescence Based on N-Deficient Porous Graphitic Carbon Nitride (g-C3N4)

The N-deficient porous g-C₃N₄ with broadband white light emission was constructed by supramolecular copolymerization design, which combined organic copolymers cyanuric acid and 2,4,6-triaminopyrimidine with melamine upon the mixture gas environment of (95%)N₂/(5%)H₂. Herein, we achieved great breakthrough in narrowing the band gap of g-C₃N₄ from 2.64 to 1.39 eV. Furthermore, in contrast to pristine g-C₃N₄, we demonstrated that the emission wavelengths of N-deficient porous g-C₃N₄ can be tuned from narrow blue to broadband white range, where the optimal white light coordinate position is (0.297, 0.345). The prepared N-deficient porous g-C₃N₄ overcomes the limitation of the narrow adjusting range of optical properties while using conventional g-C₃N₄ and makes it more promising for applications in solid-state displays.

Electrochemical detection of thiamethoxam in food samples based on Co3O4 Nanoparticle@Graphitic carbon nitride composite

Thiamethoxam is a class of neonicotinoid insecticide widely used in agriculture. Due to their high water solubility, thiamethoxam can be transported to surface waters and have the potential to be toxic to human life. Herein, a simple and robust method is presented for the detection of thiamethoxam based on hydrothermally synthesized nanoparticles of cobalt oxide into the graphitic carbon nitride composite (Co₃O₄@g-C₃N₄ NC). The materials were well characterized by XRD, FT-IR, XPS, FESEM, HRTEM, EDX, and UV-vis which provide crystalline nature, structure, and composition. The impedance measurement shows an intimate electrode/electrolyte interface by casting Co₃O₄@g-C₃N₄ onto a screen-printed carbon electrode (SPCE), delivering an interfacial resistance as low as 12.5 Ωcm². The cyclic voltammetry and differential pulse voltammetry measurements exhibit the nanocomposite as a superior electrocatalyst for the electrochemical detection of thiamethoxam and achieved a low detection limit of 4.9 nM with a wide linear range of 0.01-420 μM. The present work also demonstrates a promising strategy for electrochemical detection of thiamethoxam in real samples such as potato and brown rice.

Construction of phosphorus-doped carbon nitride/phosphorus and sulfur co-doped carbon nitride isotype heterojunction and their enhanced photoactivity

Photocatalysis was one of the most promising techniques for environmental remediation. Exploring photocatalysts with high efficiency, low cost and easy preparation was still an ongoing issue. In this work, phosphorus-doped carbon nitride/phosphorus and sulfur co-doped carbon nitride (P-C₃N₄/PS-C₃N₄) isotype heterojunction was prepared by a two-step calcination method. The composite displayed a sheet-like structure with a surface area of 23 m²/g. Compared with pure C₃N₄, band gaps of P-C₃N₄ and PS-C₃N₄ were only slightly modified during the heteroatom-doping process. Therefore, a well-matched band alignment was constructed, which not only improved the separation efficiency of photogenerated electron-hole pairs, but also well preserved the high oxidizability of holes on valance band and good reducibility of electrons on conduction band. Because of the similarity in physicochemical properties, the interface resistance between P-C₃N₄ and PS-C₃N₄ was low, which accelerated the electron transfer and prolonged the lifetime of charge carriers. Although the visible-light utilization was somewhat low in comparison with P-C₃N₄ and PS-C₃N₄, by taking advantage of above merits, P-C₃N₄/PS-C₃N₄ displayed the high photocatalytic activity in rhodamine B degradation, and the reaction rate constant was 0.183 min^-1, about 8.7 and 4.0 times higher than those of P-C₃N₄ and PS-C₃N₄. Besides high catalytic activity, isotype heterojunction displayed good recyclability, since 95.3% of catalytic activity was maintained after the 5^th cycle. The method presented here was facile, economic and environmentally benign, thus it was highly attractive for the application in environmental remediation.

Bi4NbO8Cl {001} nanosheets coupled with g-C3N4 as 2D/2D heterojunction for photocatalytic degradation and CO2 reduction

Photocatalytic activity is largely restricted by insufficient photoabsorption and intense recombination between charge carriers. Here, we first synthesized Bi₄NbO₈Cl nanosheets with {001} exposing facets by a molten-salt growth method, which shows largely promoted photocatalytic performance for the degradation of tetracycline (TC) and bisphenol A (BPA) in comparison with Bi₄NbO₈Cl particles obtained by solid-state reaction. The 2D/2D Bi₄NbO₈Cl/g-C₃N₄ heterojunction photocatalysts were then fabricated via high-energy ball-milling and post-sintering to realize intimate interfacial interaction. The photocatalytic activity of all the Bi₄NbO₈Cl/g-C₃N₄ composites largely enhances compared to Bi₄NbO₈Cl nanosheets and g-C₃N₄, also far exceeding the mechanically-mixed Bi₄NbO₈Cl nanosheets and g-C₃N₄. The impact of different reaction parameters on the photocatalytic degradation activities was investigated, including catalyst concentration, pH value and TC concentration. In addition, Bi₄NbO₈Cl/g-C₃N₄ also presents improved photocatalytic CO₂ reduction activity for CO production. The large enhancement on photocatalytic activity of Bi₄NbO₈Cl/g-C₃N₄ composites is owing to the synergistic effect of favorable 2D/2D structure and construction of type II heterojunction with intimate interfacial interaction, thus boosting the charge separation. The formation of type II heterojunction was evidenced by selective photo-deposition of Pt and MnO_x, which demonstrate that the reductive sites and oxidative sites are on Bi₄NbO₈Cl nanosheets and g-C₃N₄, respectively. This work may provide some insights into fabrication of efficient visible-light driven photocatalysts for environmental and energy applications.

Carbon quantum dots modified tubular g-C3N4 with enhanced photocatalytic activity for carbamazepine elimination: Mechanisms, degradation pathway and DFT calculation

A novel tubular graphitic carbon nitride (g-C₃N₄) modified with carbon quantum dots (CQDs) was fabricated and employed for the elimination of carbamazepine (CBZ) under visible light irradiation. The as-fabricated metal-free catalysts exhibited tubular morphologies due to the preforming of tubular protonated melamine with CQDs surface adsorption as the polymerization precursors. The surface bonded CQDs did not alter the band gap structure of g-C₃N₄, but greatly inhibited the charge recombination. Therefore, the CBZ degradation kinetics of tubular g-C₃N₄ were increased by over 5 times by the incorporation of CQDs. The main active species for CBZ degradation were found to be superoxide radical (O₂^-) and photo-generated holes (h⁺), which were further confirmed by electron spin resonance (ESR) analysis. In addition, the degradation pathways of CBZ were clarified via intermediates identification and quantum chemical computation using density functional theory (DFT) and wave function analysis. The olefinic double bond with the highest condensed Fukui index (f⁰ = 0.108) in CBZ molecule was found to be the most preferable sites for radical attack. Moreover, good stability of the as-prepared photocatalysts was observed in the consecutive recycling cycles, while the slight decline of photocatalytic activity was attributed to the minimal surface oxidation.

Development of advanced materials for cleaner energy generation through fuel cells

The use of fuel cells in the transportation sector holds promise as a sustainable option for the generation of cleaner energy along with cumulative lesser GHG emissions.

Surface-state-induced upward band bending in P doped g-C3N4 for the formation of an isotype heterojunction between bulk g-C3N4 and P doped g-C3N4: photocatalytic hydrogen production

The staggered type heterojunction with g-C₃N₄ based nanomaterials has received much attention owing to its change in chemical potential between two semiconductors.

Interfacial engineering by creating Cu-based ternary heterostructures on C3N4 tubes towards enhanced photocatalytic oxidative coupling of benzylamines

Benzylamine coupling is a very important reaction for the synthesis of imine but still faces many challenges. Herein, we present a highly effective strategy towards the coupling reaction by using environmentally friendly catalysts. These catalysts are composed of Cu/Cu₂O/Cu₃N heterostructures supported by C₃N₄ tubes and the composites were synthesized by one-step hydrothermal treatment followed by calcination. Cu₂O, Cu₃N, and C₃N₄ all are responsive to visible light and the heterojunction formed can greatly enhance the charge separation. When used as photocatalysts for oxidative self-coupling of benzylamine at a low temperature of 323 K in air, Cu/Cu₂O/Cu₃N/C₃N₄ was able to give conversion and selectivity values of up to 99% and 98%, respectively. The high efficiency of the catalysts is attributable to their ability to generate large quantities of free radicals (such as ·OH and ·O₂⁻) under visible-light irradiation.

Cu/Cu₂O/Cu₃N heterostructures supported C₃N₄ tubes were synthesized by one-step hydrothermal treatment followed by calcination, which showed enhanced photocatalytic activity for oxidative self-coupling of benzylamine under visible-light.

Accelerated photodeterioration of class I toxic monocrotophos in the presence of one-pot constructed Ag3PO4/polyaniline@g-C3N4 nanocomposite: efficacy in light harvesting

Water and soil contamination has become unavoidable due to the enormous usage of pesticides in agriculture. Among the pesticides, monocrotophos (MCP), a popular and largely used pesticide, is extremely toxic to birds and humans, which is easily leached into the environment. Therefore, establishment of a green tactic to clean the environment from such hazard is very essential. Herein, we have developed a novel ternary nanocomposite, Ag₃PO₄/polyaniline@g-C₃N₄ with enhanced electron-hole separation efficiency, a condition which is very much required for any photocatalyst. The nanocomposite was one-pot synthesized by a simple and economical hydrothermal method. The strategically modulated band gaps of the nanocomposite help harvest the sunlight efficaciously for the robust degradation of MCP (99.6%). It has been found that the active species involved in the photo-cleaning process are OH^· and O₂^·-. A suitable reaction mechanism has been proposed and discussed. Analytical techniques, which include energy-dispersive X-ray spectroscopy (EDX), field emission scanning electron microscopy (FE-SEM), elemental mapping analysis, high-resolution transmission electron microscopy (HR-TEM), Fourier transform infrared (FT-IR) spectroscopy, ultraviolet-visible diffuse reflectance spectroscopy (UV-DRS), and X-ray diffraction (XRD), were used to characterize the synthesized nanocomposite. This nano-photocatalyst, which is simple, stable, and reusable, certainly has potential applications in soil contamination remediation, sewage treatments, and other environment decontaminations. Also, a study of this kind offers more strategic plans for the production of clean energy (hydrogen) by solar-driven water splitting.

Graphitic carbon nitride with thermally-induced nitrogen defects: an efficient process to enhance photocatalytic H2 production performance

An efficient thermal-treatment method was developed for the preparation of defect modified g-C₃N₄ with excellent photocatalytic H₂ production performance.

Ultralow-temperature synthesis of small Ag-doped carbon nitride for nitrogen photofixation

A low-temperature-reduction–deposition method is used to prepare homogeneously dispersed Ag⁰/g-C₃N₄ for efficient N₂ photofixation.

Surface engineered 2D materials for photocatalysis

2D materials, with thin thickness, large lateral size and abundant exposed surface atoms with dominant facets, provide ideal platforms for carrying out surface engineering at the atomic level for optimizing their photocatalytic performance.

Direct Z-scheme La1-xCexMnO3 catalyst for photothermal degradation of toluene

A series of Ce-doped LaMnO₃ (La_1-xCe_xMnO₃) were prepared and were tested for gaseous toluene oxidation in order to investigate the effect of cerium doping in LaMnO₃ on activity under photothermal conditions. It was found that the activity and CO₂ yield of the catalyst can be effectively increased when x = 0.25. A group of characterization is used to characterize the morphology, composition, and physical properties of the as-prepared catalysts. Results show that the Ce-doped LaMnO₃ can form coexistence of La_1-xCe_xMnO₃ and CeO₂, the reaction of CeO₂/La_1-xCe_xMnO₃ under photothermal conditions follows the Mars-van Krevelen redox cycle mechanism, and the prepared CeO₂/La_1-xCe_xMnO₃ can form a highly efficient Z-scheme heterojunction, which can enhance the electrons transfer speed of the catalyst. Moreover, in the photothermal catalytic degradation, lattice oxygen is the most important active substance, a small amount of cerium doping can increase the lattice oxygen content of perovskite and increase the activity of the reaction.

One-step, high-yield synthesis of g-C3N4 nanosheets for enhanced visible light photocatalytic activity

A facile template-free one-step synthesis method of ultrathin g-C₃N₄ nanosheets was developed through thermal polycondensation of melamine. The higher temperature, prolonged time and tightly sealed crucible reaction system contributed to the formation of ultrathin g-C₃N₄ nanosheets. The as-synthesized g-C₃N₄ nanosheets were applied to the visible light photocatalytic degradation of RhB. The photocatalytic activity was significantly enhanced with increased calcination temperature from 500 °C to 650 °C and prolonged calcination time from 4 h to 10 h. Interestingly, the obtained ultrathin g-C₃N₄ nanosheets simultaneously possess high yield and excellent photocatalytic activity. Moreover, g-C₃N₄ nanosheets can maintain photochemical stability after five consecutive runs. The remarkably enhanced photocatalytic activity can be interpreted as the synergistic effects of the enhanced crystallinity, the large surface area, the reduced layer thickness and size and the reduced number of defects. A new layer exfoliation and splitting mechanism of the formation of the ultrathin nanosheets was proposed. This work provides a new strategy to develop a facile eco-friendly template-free one-step synthesis method for potential large-scale synthesis of ultrathin nanosheets with high yield, high photocatalytic efficiency and stable activity for environmental and energetic applications.

Photocatalytic Approaches for Hydrogen Production via Formic Acid Decomposition

The photocatalytic dehydrogenation of formic acid has recently emerged as an outstanding alternative to the traditional thermal catalysts widely applied in this reaction. The utilization of photocatalytic processes for the production of hydrogen is an appealing strategy that perfectly matches with the idea of a green and sustainable future energy scenario. However, it sounds easier than it is, and great efforts have been needed to design and develop highly efficient photocatalysts for the production of hydrogen from formic acid. In this work, some of the most representative strategies adopted for this application are reviewed, paying particular attention to systems based on TiO₂, CdS and C₃N₄.

Graphitic Carbon Nitride Materials for Photocatalytic Hydrogen Production via Water Splitting: A Short Review

The generation of photocatalytic hydrogen via water splitting under light irradiation is attracting much attention as an alternative to solve such problems as global warming and to increase interest in clean energy. However, due to the low efficiency and selectivity of photocatalytic hydrogen production under solar energy, a major challenge persists to improve the performance of photocatalytic hydrogen production through water splitting. In recent years, graphitic carbon nitride (g-C3N4), a non-metal photocatalyst, has emerged as an attractive material for photocatalytic hydrogen production. However, the fast recombination of photoexcited electron–hole pairs limits the rate of hydrogen evolution and various methods such as modification, heterojunctions with semiconductors, and metal and non-metal doping have been applied to solve this problem. In this review, we cover the rational design of g-C3N4-based photocatalysts achieved using methods such as modification, metal and non-metal doping, and heterojunctions, and we summarize recent achievements in their application as hydrogen production photocatalysts. In addition, future research and prospects of hydrogen-producing photocatalysts are also reviewed.

Photocatalytic degradation of trihalomethanes and haloacetonitriles on graphitic carbon nitride under visible light irradiation

Trihalomethanes (THMs) and haloacetonitriles (HANs), most common disinfection by-products in drinking water, pose adverse environmental impacts and potential risks to human health. There is a pressing need to develop innovative, economically feasible, and environmentally benign processes to control these persistent contaminants. In this paper, visible-light-responsive graphitic carbon nitride (g-C₃N₄) samples were synthesized to degrade the THMs and HANs and the photocatalytic degradation mechanism was explored. The results indicated that a carbon-doped g-C₃N₄ with an optimum dopant content (MCB_0.07) displayed the best photocatalytic activity for the total trihalomethanes (TTHM) and total haloacetonitriles (THAN), with the reaction rate constant of 11.6 and 10.4 (10^-3 min^-1), respectively. MCB_0.07 demonstrated a high THMs and HANs removal efficiency under visible light irradiation and could be reused. According to scavenger tests of the selected reactive species and X-ray photoelectron spectroscopy, holes play a dominant role for both THMs and HANs degradation on the MCB_0.07. The degradation of HANs by holes proceeded mainly through breakage of the CC bond in the CCN group. The THMs degradation was achieved through hydrogen abstraction or/and dehalogenation. The brominated-THMs/HANs were more photosensitive than their chlorinated analogous and were less stable than bromo-chloro-THMs/HANs. This study sheds light on the mechanism of the photocatalytic degradation of THMs and HANs under visible light irradiation by carbon-doped g-C₃N₄. Furthermore, it could provide insights for engineering applications and contaminant control in drinking water purification.

All-inorganic perovskite/graphitic carbon nitride composites for CO2 photoreduction into C1 compounds under low concentrations of CO2

CsPbBr₃ is widely used in solar cells and LEDs for its excellent photoelectric properties that are also attractive for CO₂ photoreduction, but it is less used in the photocatalytic reduction of CO₂ mainly owing to its limited charge separation efficiency. To alleviate this issue, herein, all-inorganic orthorhombic CsPbBr₃ was combined with graphitic carbon nitride (g-C₃N₄) and the resultant composite (CsPbBr₃@g-C₃N₄) showed enhanced activity in CO₂ photoreduction. Under the irradiation of AM1.5 filter for 12 h, CO₂ was converted into CH₄ and CO with high selectivity to methane (91%) and the total amount of gaseous products up to ∼300 μmol g^-1. This reactivity is 6-fold and 4-fold higher than that of pure g-C₃N₄ and CsPbBr₃, respectively. CsPbBr₃@g-C₃N₄ also shows excellent catalytic activity at low concentrations of CO₂. Studies of energy band level and steady-state and transient photoluminescence spectroscopy indicated that the incorporation of CsPbBr₃ and g-C₃N₄ increases charge separation, which may result in sharply enhanced catalytic efficiency. This study has provided opportunities for the combination of CsPbBr₃ and other semiconductor catalysts for the photocatalytic reduction of CO₂.

Polymeric structure optimization of g-C3N4 by using confined argon-assisted highly-ionized ammonia plasma for improved photocatalytic activity

The optimization of the polymeric structure and the modulation of surface amino groups in graphitic carbon nitride (g-CN) are critical but challenging in improving the photoelectric and photocatalytic performances of this polymer semiconductor. Ammonia plasma treatment may provide a fast and useful approach to optimize g-CN materials yet is seriously restricted by the low ionization ability of ammonia. Herein, a confined fast and environmental-friendly ammonia plasma method based on argon-assisted high ionization of NH₃ was developed for efficient modification of raw g-CN. Compared with the weakly-ionized pure ammonia plasma which can only introduce amino group onto the surface g-CN, the argon-assisted highly-ionized ammonia plasma treatment obviously contributes to the comprehensively polymeric structure optimization of g-CN, and thus plays a key role in enhancing its light-harvesting and decelerating the recombination of the photogenerated charge carriers. As a result, the argon-assisted highly-ionized ammonia plasma-treated g-CN-Ar+NH₃ outperformed the raw g-CN by a 2.5-fold higher photocatalytic reduction of hexavalent chromium and a remarkable 3.8-fold higher photocatalytic H₂ evolution activity (up to 957.8 μmol·h^-1·g^-1) under visible light irradiation. Our findings suggest the great prospects of this novel highly-ionized ammonia plasma treatment method in the controllable modification of semiconductors and polymers.