Homogeneous Suspensions of Individualized Microfibrils from TEMPO-Catalyzed Oxidation of Native Cellulose

Hierarchical Assembly of Nanocellulose into Filaments by Flow-Assisted Alignment and Interfacial Complexation: Conquering the Conflicts between Strength and Toughness

Filaments comprising solely cellulose nanofibrils (CNFs) have been fabricated by flow-assisted assembling, where the strength can be improved greatly with the sacrifice of toughness. Inspired by the architecture of natural nacre and plant cell wall, the combined technique of convergent microfluidic spinning and in situ interfacial complexation between CNF and chitosan molecules was used to construct the filaments with hierarchical assembly of highly oriented CNFs locked by chitosan complexes, showing simultaneous enhancements of strength and toughness. In specific, the best performing filament exhibited a toughness of 88.9 kJ/m³ and a tensile strength of 1289 MPa because of the strong interfacial complexation interactions between CNFs and chitosan molecules. The tensile strength was further raised to 1627 MPa when the filaments were cross-linked synergistically by using Ca²⁺, surpassing the reported values in the literature. Molecular dynamics simulations revealed the possible fracture mechanism of the filaments under tension. With excellent mechanical performance and biocompatibility, the resulting CNF/chitosan filament system showed a promising application potential as nonabsorbable surgical sutures. The demonstrated spinning technology also offered a new avenue for the fabrication of high-performance filaments.

Blending Gelatin and Cellulose Nanofibrils: Biocomposites with Tunable Degradability and Mechanical Behavior

Many studies show how biomaterial properties like stiffness, mechanical stimulation and surface topography can influence cellular functions and direct stem cell differentiation. In this work, two different natural materials, gelatin (Gel) and cellulose nanofibrils (CNFs), were combined to design suitable 3D porous biocomposites for soft-tissue engineering. Gel was selected for its well-assessed high biomimicry that it shares with collagen, from which it derives, while the CNFs were chosen as structural reinforcement because of their exceptional mechanical properties and biocompatibility. Three different compositions of Gel and CNFs, i.e., with weight ratios of 75:25, 50:50 and 25:75, were studied. The biocomposites were morphologically characterized and their total- and macro- porosity assessed, proving their suitability for cell colonization. In general, the pores were larger and more isotropic in the biocomposites compared to the pure materials. The influence of freeze-casting and dehydrothermal treatment (DHT) on mechanical properties, the absorption ability and the shape retention were evaluated. Higher content of CNFs gave higher swelling, and this was attributed to the pore structure. Cross-linking between CNFs and Gel using DHT was confirmed. The Young’s modulus increased significantly by adding the CNFs to Gel with a linear relationship with respect to the CNF amounts. Finally, the biocomposites were characterized in vitro by testing cell colonization and growth through a quantitative cell viability analysis performed by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. Additionally, the cell viability analysis was performed by the means of a Live/Dead test with Human mesenchymal stem cells (hMSCs). All the biocomposites had higher cytocompatibility compared to the pure materials, Gel and CNFs.

Development of an immunosuppressive camouflage-coating platform with nanocellulose and cell membrane vesicles

Biomedical devices trigger immune responses when implanted in the body, as they are treated as foreign bodies. To avoid inflammatory responses and enhance the biocompatibility of biomedical devices, advanced coating technology that can modulate immune responses is essential. As a part of the immune response in the body, autologous cells evade attack from macrophages using CD47 ligands that function as markers for self. Inspired by this self-recognition system, we developed a camouflage coating for biomaterial surfaces using cell membrane vesicles that could suppress inflammatory responses. In this study, we used monocyte-derived cell membrane vesicles expressing CD47 for coating nanocellulose-coated substrates. Our data showed that presentation of CD47 to macrophages elicited negative signal transduction for immunosuppression. Further, for coating, we used cell membrane vesicles and plant-derived nanofibers. We observed that the supporting layer of cellulose nanofibers physically fixed cell membrane vesicles and provided hydrophilic surfaces to the polystyrene substrate. Based on CD47 signaling, cell membrane vesicle coating suppressed the inflammatory responses of stimulated macrophages. Camouflaging biomaterial surfaces with cell-derived components might serve as an advanced coating platform to suppress inflammatory responses and enhance tissue integrity for biomedical devices after implantation.

Self-Standing High-Performance Transparent Actuator Based on Poly(dimethylsiloxane)/TEMPO-Oxidized Cellulose Nanofibers/Ionic Liquid Gel

The sustainable application of cellulose nanofibers and ionic liquids (ILs) in the fabrication of transparent gel electrolyte actuators combined with thin electrodes remains to be explored. Accordingly, this study developed a new actuator on the basis of a 2,2,6,6-tetramethylpiperidine-1-oxyl radical-oxidized cellulose nanofibers/IL/poly(dimethylsiloxane) (TOCN/IL/PDMS) transparent gel electrolyte. A casting method was employed to prepare the gel electrolyte film, and spray-coating was used to apply thin electrodes. On the basis of its electromechanical and electrochemical properties, the TOCN/IL/PDMS gel electrolyte actuator had high strain performance. The actuator's operational mechanism is based on both electrostatic double-layer capacitor (EDLC) and Faradaic capacitor mechanisms, with the EDLC mechanism having a stronger influence. The actuator's displacement-response frequency dependency was determined, and we simulated the obtained findings by using a double-layer charging kinetic model. The combined gel electrolyte and electrode resistance resulted in a favorable fit to the experimental data, as did the gel electrolyte resistance alone. The performance of the TOCN/IL/PDMS-electrolyte-based polymer actuators can be improved further by designing electrolytes (primarily) and electrodes to have high ionic and electrical conductivities. The films-which are flexible, robust, and transparent-may have potential as actuator materials within electronic and energy-conversion devices that are required to be wearable and transparent.

Production and Mechanical Characterisation of TEMPO-Oxidised Cellulose Nanofibrils/β-Cyclodextrin Films and Cryogels

Wood-based TEMPO-oxidised cellulose nanofibrils (toCNF) are promising materials for biomedical applications. Cyclodextrins have ability to form inclusion complexes with hydrophobic molecules and are considered as a method to bring new functionalities to these materials. Water sorption and mechanical properties are also key properties for biomedical applications such as drug delivery and tissue engineering. In this work, we report the modification with β-cyclodextrin (βCD) of toCNF samples with different carboxyl contents viz. 756 ± 4 µmol/g and 1048 ± 32 µmol/g. The modification was carried out at neutral and acidic pH (2.5) to study the effect of dissociation of the carboxylic acid group. Films processed by casting/evaporation at 40 °C and cryogels processed by freeze-drying were prepared from βCD modified toCNF suspensions and compared with reference samples of unmodified toCNF. The impact of modification on water sorption and mechanical properties was assessed. It was shown that the water sorption behaviour for films is driven by adsorption, with a clear impact of the chemical makeup of the fibres (charge content, pH, and adsorption of cyclodextrin). Modified toCNF cryogels (acidic pH and addition of cyclodextrins) displayed lower mechanical properties linked to the modification of the cell wall porosity structure. Esterification between βCD and toCNF under acidic conditions was performed by freeze-drying, and such cryogels exhibited a lower decrease in mechanical properties in the swollen state. These results are promising for the development of scaffold and films with controlled mechanical properties and added value due to the ability of cyclodextrin to form an inclusion complex with active principle ingredient (API) or growth factor (GF) for biomedical applications.

Preparation and characterization of cellulose nanofiber cryogels as oil absorbents and enzymatic lipolysis scaffolds

Cellulose nanofiber (CNF) materials have received much attention as sustainable "green" materials with high mechanical properties. Their application in oil absorption and enzymatic lipolysis makes them further attractive from the perspective of environmental issues including marine pollution preservation. Herein, we prepared CNF cryogels with various surface properties, evaluated their capacities as oil absorbents and applied them as lipase-lipolysis scaffolds. Their obtained cryogels consisted of various modified CNFs and their structure and properties were investigated. Moreover, lipase-supported CNF cryogels were prepared for enzymatic lipolysis. The cryogels of protonated TEMPO-oxidized CNF showed the highest absorption capacity for olive oil, while all the CNF cryogels possessed similar absorption abilities towards water. In enzymatic lipolysis with lipase, the TEMPO-oxidized CNF (TOCN-Na⁺) cryogel showed the highest specific activity. The specific activities of lipase in TOCN-Na⁺ cryogels remained unchanged after being stored at 40 °C for 3 days.

Acid-free preparation and characterization of kelp (Laminaria japonica) nanocelluloses and their application in Pickering emulsions

Cellulose nanofibers (CNFs) from kelp were prepared by cellulase treatment with lengths greater than 3 μm. CNFs were further oxidized by TEMPO-oxidized system, and the lengths of the oxidized CNFs (TEMPO-CNFs) were 0.6-1 μm. AFM and TEM images showed that intertwined CNFs fibers were divided into individual nanofibrils. The crystallinity of TEMPO-CNFs increased to 66.5 %. TGA analysis indicated that TEMPO-CNFs were more sensitive to temperature than cellulose and CNFs. FT-IR spectra revealed no changes in the basic cellulose structures of CNFs and TEMPO-CNFs. In the sunflower oil/water (20/80, v/v) model emulsions, the oil droplet sizes were less than 20 μm in CNFs emulsions, which became smaller in TEMPO-CNFs emulsions. Delamination was found in CNFs emulsions after three days of storage. Addition of NaCl increased the volumes of TEMPO-CNFs emulsions but enlarged the oil droplets sizes. TEMPO-CNFs emulsions had the largest volume with smallest and most homogeneous oil droplets at pH 3. TEMPO-CNFs emulsions showed good stability after storage for 30 days. Further, TEMPO-CNFs could also emulsify 50 % (v/v) of sunflower oil. All these results indicated that TEMPO-CNFs can be used in preparing Pickering emulsions.

Improvement of cell deposition by self-absorbent capability of freeze-dried 3D-bioprinted scaffolds derived from cellulose material-alginate hydrogels

Cell-laden printing is the most commonly used approach in 3D bioprinting. One of the major drawbacks of cell-laden printing is that cell viability is highly affected by the extrusion pressure and shear force in the printing process. We present a new cell-deposition method by using the superabsorbent capability of 3D printed scaffolds with four ink formations: 20:10 nanocrystal/alginate (NCA 20/10), 20:10 nanofiber/alginate (NFA 20/10), 20:02 nanocrystal/alginate (NCA 20/02) and 20:02 nanofiber/alginate (NFA 20/02). Limited pores were observed from the surface of inherent NCA and NFA scaffolds, which may limit the numbers of cells to enter into the scaffolds. Therefore, we designed a dual-porous (DP) structure to connect the inherent pores (IPs) to the scaffold surface. Due to these porous structures, NCA and NFA scaffolds exhibit an excellent capability to absorb cell suspension, which may be used for depositing cells to 3D-printed scaffolds, namely self-absorbent (SA) deposition. Compared to the conventional top-loading (TL) method, the SA method had more uniform cell distributions in the entire 3D-printed scaffolds and higher efficiency of cell deposition. For the TL method, DP scaffold exhibited a more uniform cell distribution, which may provide a better microenvironment for the cells in comparison to the IP scaffold. For both cell loading methods, a rapid increase of cell number was observed in the first 4 days of culture in the 3D-printed NCA and NFA structures. NFA 20/02 exhibits the best cell viability compared to the other three inks. In conclusion, the SA method may serve as a new approach for loading cells in cell-free 3D-bioprinting, and DP design could improve the efficiency of the cell deposition.

Mechanical Characterization on Solvent Treated Cellulose Nanofiber Preforms Using Solution Dipping-Hot Press Technique

Nanocomposites films were prepared by impregnating the solvent treated cellulose nanofiber (SCNF) preforms with epoxy resin using a solution dipping-hot press technique. We investigated the effect of SCNF preforms porosity on the amount of impregnated resin and tensile properties of the corresponding nanocomposites films. The porosity of the CNF preforms was successfully controlled using the solvent exchange with varying CNF concentration. The impregnated resin amount increased as the SCNF preforms porosity increased, respectively. Resulting nanocomposite films showed higher mechanical properties than that of the SCNF preforms. The best mechanical properties of composites were found with the combination of 1 wt % SCNF preform and low viscosity epoxy, exhibiting tensile strength and Young's modulus of 77 MPa and 4.8 GPa, respectively. The composite also showed high fiber volume fraction of more than 60%.

Hestekin J. Oxone®-Mediated TEMPO-Oxidized Cellulose Nanomaterials form I and form II

The 2,2,6,6-tetramethylpiperidin-1-oxyl (TEMPO) oxidation of cellulose, when mediated with Oxone^® (KHSO₅), can be performed simply and under mild conditions. Furthermore, the products of the reaction can be isolated into two major components: Oxone^®-mediated TEMPO-oxidized cellulose nanomaterials Form I and Form II (OTO-CNM Form I and Form II). This study focuses on the characterization of the properties of OTO-CNMs. Nanoparticle-sized cellulose fibers of 5 and 16 nm, respectively, were confirmed through electron microscopy. Infrared spectroscopy showed that the most carboxylation presented in Form II. Conductometric titration showed a two-fold increase in carboxylation from Form I (800 mmol/kg) to Form II (1600 mmol/kg). OTO-CNMs showed cellulose crystallinity in the range of 64–68% and crystallite sizes of 1.4–3.3 nm, as shown through XRD. OTO-CNMs show controlled variability in hydrophilicity with contact angles ranging from 16 to 32°, within or below the 26–47° reported in the literature for TEMPO-oxidized CNMs. Newly discovered OTO-CNM Form II shows enhanced hydrophilic properties as well as unique crystallinity and chemical functionalization in the field of bio-sourced material and nanocomposites.

Nanocellulose from recycled indigo-dyed denim fabric and its application in composite films

In this study, nanocellulose was extracted from indigo-dyed denim fabric and the resultant nanocellulose properties were evaluated in comparison with those derived from bleached cotton fabric and wood pulp in order to investigate the potential of recycling denim waste for nanocellulose production and application. Sulfuric acid hydrolysis and (2,2,6,6-tetramethylpiperidin-1-yl) oxyl (TEMPO)-oxidation were utilized to produce cellulose nanocrystals (CNC) and cellulose nanofibers (TOCN), respectively. A stable CNC suspension with blue color was obtained after acid hydrolysis and the TEMPO process yielded colorless TOCN. The denim-derived nanocellulose possessed similar yield, morphology, size, crystallinity, and thermal stability to those derived from bleached cotton but higher crystallinity and thermal stability compared to the nanocellulose from wood pulp. When used to reinforce polyvinyl alcohol film, the blue indigo-CNC not only enhanced mechanical properties of the film but also provided the film with outstanding UV blocking.

Surface-Initiated Controlled Radical Polymerization Approach to In Situ Cross-Link Cellulose Nanofibrils with Inorganic Nanoparticles

This paper investigates a strategy to convert hydrophilic cellulose nanofibrils (CNF) into a hydrophobic highly cross-linked network made of cellulose nanofibrils and inorganic nanoparticles. First, the cellulose nanofibrils were chemically modified through an esterification reaction to produce a nanocellulose-based macroinitiator. Barium titanate (BaTiO₃, BTO) nanoparticles were surface-modified by introducing a specific monomer on their outer-shell surface. Finally, we studied the ability of the nanocellulose-based macroinitiator to initiate a single electron transfer living radical polymerization of stearyl acrylate (SA) in the presence of the surface-modified nanoparticles. The BTO nanoparticles will transfer new properties to the nanocellulose network and act as a cross-linking agent between the nanocellulose fibrils, while the monomer (SA) directly influences the hydrophilic-lipophilic balance. The pristine CNF and the nanoparticle cross-linked CNF are characterized by FTIR, SEM, and solid-state ¹³C NMR. Rheological and dynamic mechanical analyses revealed a high dregee of cross-linking.

Functionalized cellulose nanofibril aerogels as cooperative acid-base organocatalysts for liquid flow reactions

Cellulose nanomaterial aerogels are macroscopic porous solids with relatively high surface areas and are thus an interesting basis for renewable catalyst materials. Cross-linked acid-base bifunctional catalyst aerogels are produced here from TEMPO-oxidized cellulose nanofibrils (TOCNF) and demonstrated in both batch and flow catalysis. Recently established acid-base modification for catalysis is expanded upon for chemical or physical cross-linking with small molecules and polymers. Low density and relatively high surface area (up to 74 m² g^-1) aerogel catalysts are produced with a variety of processing approaches and then freeze-dried from water or tert-butyl alcohol/water mixtures. Finer pore structure and increased surface area are achieved with tert-butyl alcohol as co-solvent. Chemical cross-linking improved aerogel stability to solvents. Homogeneous and aerogel TOCNF catalysts are shown to be effective acid-base cooperative catalysts for aldol condensation reactions in batch reactions. Continuous flow reactions are performed with glass column reactors packed with aerogel catalysts that showed improved rates relative to batch experiments, while also demonstrating physical stability. Catalyst deactivation in flow reactions is observed and observations of deactivation support previously reported mechanisms of site poisoning by competitive chemisorption of reactants in analogous acid-base catalysts. This report is a key demonstration of cellulose nanofibril aerogels for catalysis in continuous liquid flow reactions.

Filler size effect in an attractive fibrillated network: a structural and rheological perspective

The effect of the filler size on the structural and mechanical properties of an attractive fibrillated network composed of oxidised cellulose nanofibrils (OCNF) in water was investigated. Silica nanoparticles with a diameter of ca. 5 nm (SiNp5) and and ca. 158 nm (SiNp158) were chosen as non-interacting fillers of the OCNF network. These filler sizes were chosen, respectively, to have a particle size which was either similar to that of the network mesh size or much larger than it. Contrast matched small angle neutron scattering (SANS) experiments revealed that the presence of the fillers (SiNp5 and SiNp158) did not perturb the structural properties of the OCNF network at the nanometer scale. However, the filler size difference strongly affected the mechanical properties of the hydrogel upon large amplitude oscillatory shear. The presence of the smaller filler, SiNp5, preserved the mechanical properties of the hydrogels, while the larger filler, SiNp158, allowed a smoother breakage of the network and low network recoverability after breakage. This study showed that the filler-to-mesh size ratio, for non-interacting fillers, is pivotal for tailoring the non-linear mechanical properties of the gel, such as yielding and flow.

Nanoparticle rearrangement under stress in networks of cellulose nanofibrils using in situ SAXS during tensile testing

This study aims to describe and evaluate the mechanism for increased strain-at-break of composites made of cellulose nanofibrils (CNFs) reinforced with nanoscopic latex particles (<200 nm) stabilized by a cationic polyelectrolyte as corona. The applied latex nanoparticles (NPs), synthesized by polymerization-induced self-assembly (PISA), are composed of a neutral core polymer, either poly(butyl methacrylate) (PBMA) or poly(methyl methacrylate) (PMMA). At room temperature, PBMA is close to its glass transition (Tg), while PMMA is below its Tg. Nanocomposites with 75 wt% CNFs and 25 wt% NPs were analyzed using in situ small angle X-ray scattering during tensile testing, monitoring the structural evolution of the NPs under strain. The scattering of the spherical PMMA NPs, which do not coalesce like the PBMA NPs, shows changes to the organization of the NPs in the CNF-network. The observations are corroborated by cross-sectional transmission and scanning electron microscopy. No distinct change from spherical to ellipsoidal shape is evidenced for the PMMA NP cores during tensile strain. Changes in anisotropic scattering produced by the three-dimensional NP structure appear to be very different between nanocomposites loaded with PMMA or PBMA NPs, contrasting commonly described two-dimensional CNF networks. The discrete PMMA NPs can reorganize within the CNF-NP double network under strain, resulting in maintained strength and increased strain-at-break. Increasing the humidity (20, 50 and 80% RH) during in situ measurements further emphasizes this effect in the PMMA composite, relative to the PBMA composite and CNF reference films. The onset of deformation occurs at strain values beyond the fracture of the more brittle films, indicating the effect of secondary nanoscale interaction available only for the PMMA composite, extending the plastic deformation and increasing the ductility. These results provide key insights into the deformation mechanism occurring during tensile testing in the CNF composites loaded with PMMA NPs.

A Review on Surface-Functionalized Cellulosic Nanostructures as Biocompatible Antibacterial Materials

As the most abundant biopolymer on the earth, cellulose has recently gained significant attention in the development of antibacterial biomaterials. Biodegradability, renewability, strong mechanical properties, tunable aspect ratio, and low density offer tremendous possibilities for the use of cellulose in various fields. Owing to the high number of reactive groups (i.e., hydroxyl groups) on the cellulose surface, it can be readily functionalized with various functional groups, such as aldehydes, carboxylic acids, and amines, leading to diverse properties. In addition, the ease of surface modification of cellulose expands the range of compounds which can be grafted onto its structure, such as proteins, polymers, metal nanoparticles, and antibiotics. There are many studies in which cellulose nano-/microfibrils and nanocrystals are used as a support for antibacterial agents. However, little is known about the relationship between cellulose chemical surface modification and its antibacterial activity or biocompatibility. In this study, we have summarized various techniques for surface modifications of cellulose nanostructures and its derivatives along with their antibacterial and biocompatibility behavior to develop non-leaching and durable antibacterial materials. Despite the high effectiveness of surface-modified cellulosic antibacterial materials, more studies on their mechanism of action, the relationship between their properties and their effectivity, and more in vivo studies are required.

The surface chemistry of a nanocellulose drug carrier unravelled by MAS-DNP

Cellulose nanofibrils (CNF) are renewable bio-based materials with high specific area, which makes them ideal candidates for multiple emerging applications including for instance on-demand drug release. However, in-depth chemical and structural characterization of the CNF surface chemistry is still an open challenge, especially for low weight percentage of functionalization. This currently prevents the development of efficient, cost-effective and reproducible green synthetic routes and thus the widespread development of targeted and responsive drug-delivery CNF carriers. We show in this work how we use dynamic nuclear polarization (DNP) to overcome the sensitivity limitation of conventional solid-state NMR and gain insight into the surface chemistry of drug-functionalized TEMPO-oxidized cellulose nanofibrils. The DNP enhanced-NMR data can report unambiguously on the presence of trace amounts of TEMPO moieties and depolymerized cellulosic units in the starting material, as well as coupling agents on the CNFs surface (used in the heterogeneous reaction). This enables a precise estimation of the drug loading while differentiating adsorption from covalent bonding (∼1 wt% in our case) as opposed to other analytical techniques such as elemental analysis and conductometric titration that can neither detect the presence of coupling agents, nor differentiate unambiguously between adsorption and grafting. The approach, which does not rely on the use of ¹³C/¹⁵N enriched compounds, will be key to further develop efficient surface chemistry routes and has direct implication for the development of drug delivery applications both in terms of safety and dosage.

DNP-enhanced solid-state NMR unravels the surface chemistry of functionalized nanocellulose.

Multifunctional Carbon Aerogels with Hierarchical Anisotropic Structure Derived from Lignin and Cellulose Nanofibers for CO2 Capture and Energy Storage

In current times, CO₂ capture and lightweight energy storage are receiving significant attention and will be vital functions in next-generation materials. Porous carbonaceous materials have great potential in these areas, whereas most of the developed carbon materials still have significant limitations, such as nonrenewable resources, complex and costly processing, or the absence of tailorable structure. In this study, a new strategy is developed for using the currently underutilized lignin and cellulose nanofibers, which can be extracted from renewable resources to produce high-performance multifunctional carbon aerogels with a tailorable, anisotropic pore structure. Both the macro- and microstructure of the carbon aerogels can be simultaneously controlled by carefully tuning the weight ratio of lignin to cellulose nanofibers in the precursors, which considerably influences their final porosity and surface area. The designed carbon aerogels demonstrate excellent performance in both CO₂ capture and capacitive energy storage, and the best results exhibit a CO₂ adsorption capacity of 5.23 mmol g^-1 at 273 K and 100 kPa and a specific electrical double-layer capacitance of 124 F g^-1 at a current density of 0.2 A g^-1, indicating that they have great future potential in the relevant applications.

Preparation of Cellulose/Silver Composite Particles Having a Recyclable Catalytic Property

We reported the preparation of porous cellulose particles by the solvent-releasing method, in which a solution of cellulose, dissolved in 1-butyl-3-methylimidazolium chloride and N,N'-dimethylformamide, was dropped into a large amount of 1-butanol using a syringe. The obtained particles had a high specific area because of their porous structure. Herein, to functionalize the cellulose particles, carboxylate groups are introduced into their porous structure by 2,2,6,6-tetramethylpiperidine-1-oxyl-mediated oxidation and ion exchange of carboxylate groups to Ag cations is conducted. Composite cellulose/Ag particles were synthesized by the reduction reaction using the carboxylate groups as a scaffold without free silver nanoparticles in the medium. The obtained composite particles exhibited a high catalytic ability, which was evaluated by examining the reduction of 4-nitrophenol. Moreover, we determined that the catalytic efficiency was maintained for at least three cycles by immobilizing Ag on cellulose particles.

Eco-Friendly Cellulose Nanofibrils Designed by Nature: Effects from Preserving Native State

Cellulose nanofibrils (CNFs) show high modulus and strength and are already used in industrial applications. Mechanical properties of neat CNF films or CNF-polymer matrix nanocomposites are usually much better than for polymer matrix composite films reinforced by clay, graphene, graphene oxide, or carbon nanotubes. In order to obtain small CNF diameter and colloidal stability, chemical modification has so far been necessary, but this increases cost and reduces eco-friendly attributes. In this study, an unmodified holocellulose CNF (Holo-CNF) with small diameter is obtained from mildly peracetic acid delignified wood fibers. CNF is readily defibrillated by low-energy kitchen blender processing. The hemicellulose coating on individual fibrils in the wood plant cell wall is largely preserved in Holo-CNF. This "native" CNF shows well-preserved native fibril structure in terms of length (∼2.1 μm), diameter (<5 nm), high crystallinity, high cellulose molar mass, electronegative charge, and limited mechanical processing damage. The hemicellulose coating contributes mechanical properties and high optical transmittance for CNF nanopaper, which can otherwise only be achieved with chemically modified CNFs. The CNF nanopaper shows superior mechanical properties with a Young's modulus of 21 GPa and an ultimate strength of 320 MPa. Moreover, hemicellulose imparts recyclability from the dried state. Altogether, this native CNF represents a class of colloidally stable, eco-friendly, low-cost CNF of small diameter for large-scale applications of nanopaper and nanomaterials.

A Thixotropic, Cell-Infiltrative Nanocellulose Hydrogel That Promotes in Vivo Tissue Remodeling

Injectable gels have been used in minimally invasive surgery for tissue regeneration and treatment of inflammatory diseases. However, polymeric hydrogels often fail in cell infiltration, because of the presence of dense, cross-linked molecular networks and a lack of bioactivity, which causes delayed tissue remodeling. Here, we report a thixotropic, cell-infiltrative hydrogel of biofunctionalized nanocellulose that topologically enhances cell infiltration and biochemically upregulates cellular activity for the promotion of tissue remodeling. Biodegradable, sulfonated nanocellulose forms a nanofibrous hydrogel, mimicking cellular microenvironments through cross-linking between nanocellulose and gelatin. Resulting nanocellulose hydrogels showed thixotropy, allowing for single syringe injection. Nanofiber-based hydrogels possess high molecular permeability, which is due to nanoporous structures. Sulfonate groups on nanocellulose increase protein adsorption and induce cellular extension in vitro. Highly sulfonated nanocellulose hydrogels enhanced cell infiltration and vascularization upon implantation into rats. Macrophage polarization to M2 was observed in nanocellulose hydrogels, which may be involved in tissue remodeling. Injectable, biofunctionalized nanocellulose gels have enormous potential as artificial biomatrices to heal inflammatory diseases through manipulation of the immune system and promotion of tissue remodeling.

Coaxial Spinning of All-Cellulose Systems for Enhanced Toughness: Filaments of Oxidized Nanofibrils Sheathed in Cellulose II Regenerated from a Protic Ionic Liquid

Hydrogels of TEMPO-oxidized nanocellulose were stabilized for dry-jet wet spinning using a shell of cellulose dissolved in 1,5-diazabicyclo[4.3.0]non-5-enium propionate ([DBNH][CO₂Et]), a protic ionic liquid (PIL). Coagulation in an acidic water bath resulted in continuous core-shell filaments (CSFs) that were tough and flexible with an average dry (and wet) toughness of ∼11 (2) MJ·m^-3 and elongation of ∼9 (14) %. The CSF morphology, chemical composition, thermal stability, crystallinity, and bacterial activity were assessed using scanning electron microscopy with energy-dispersive X-ray spectroscopy, liquid-state nuclear magnetic resonance, Fourier transform infrared spectroscopy, thermogravimetric analysis, pyrolysis gas chromatography-mass spectrometry, wide-angle X-ray scattering, and bacterial cell culturing, respectively. The coaxial wet spinning yields PIL-free systems carrying on the surface the cellulose II polymorph, which not only enhances the toughness of the filaments but facilities their functionalization.

Nanomaterials Derived from Fungal Sources-Is It the New Hype?

Greener alternatives to synthetic polymers are constantly being investigated and sought after. Chitin is a natural polysaccharide that gives structural support to crustacean shells, insect exoskeletons, and fungal cell walls. Like cellulose, chitin resides in nanosized structural elements that can be isolated as nanofibers and nanocrystals by various top-down approaches, targeted at disintegrating the native construct. Chitin has, however, been largely overshadowed by cellulose when discussing the materials aspects of the nanosized components. This Perspective presents a thorough overview of chitin-related materials research with an analytical focus on nanocomposites and nanopapers. The red line running through the text emphasizes the use of fungal chitin that represents several advantages over the more popular crustacean sources, particularly in terms of nanofiber isolation from the native matrix. In addition, many β-glucans are preserved in chitin upon its isolation from the fungal matrix, enabling new horizons for various engineering solutions.

Charge-driven interfacial gelation of cellulose nanofibrils across the water/oil interface

Interfacial gels, obtained by the interaction of water-dispersible oxidised cellulose nanofibrils (OCNF) and oil-soluble oleylamine (OA), were produced across water/oil (W/O) interfaces. Surface rheology experiments showed that the complexation relies on the charge coupling between the negatively-charged OCNF and OA. Complexation across the W/O interface was found to be dependent on the ζ-potential of the OCNF (modulated by electrolyte addition), leading to different interfacial properties. Spontaneous OCNF adsorption at the W/O interface occurred for particles with ζ-potential more negative than -30 mV, resulting in the formation of interfacial gels; whilst for particles with ζ-potential of ca. -30 mV, spontaneous adsorption occurred, coupled with augmented interfibrillar interactions, yielding stronger and tougher interfacial gels. On the contrary, charge neutralisation of OCNF (ζ-potential values more positive than -30 mV) did not allow spontaneous adsorption of OCNF at the W/O interface. In the case of favourable OCNF adsorption, the interfacial gel was found to embed oil-rich droplets - a spontaneous emulsification process.

Deep eutectic solvent in water pickering emulsions stabilised by cellulose nanofibrils

Deep eutectic solvent (menthol : dodecanoic acid) in water (30 : 70) emulsions stabilised with partially oxidised cellulose nanoparticles remained stable for 200 days at room temperature. Deep eutectic-based emulsions offer potential for non-aqueous reaction systems, chemical extraction, and controlled release. Pickering emulsions using polysaccharides are less toxic and more stable than surfactant-stabilised emulsions.

Deep eutectic solvent in water emulsions stabilised with bio-macromolecules were stable for more than 200 days.

Hybrids based on borate-functionalized cellulose nanofibers and noble-metal nanoparticles as sustainable catalysts for environmental applications

Polymeric supports from renewable resources such as cellulose nanomaterials are having a direct impact on the development of heterogenous sustainable catalysts. Recently, to increase the potentiality of these materials, research has been oriented towards novel functionalization possibilities. In this study, to increase the stability of cellulose nanofiber films as catalytic supports, by limiting the solubility in water, we report the synthesis of new hybrid catalysts (HC) based on silver, gold, and platinum nanoparticles, and the corresponding bimetallic nanoparticles, supported on cellulose nanofibers (CNFs) cross-linked with borate ions. The catalysts were prepared from metal precursors reduced by the CNFs in an aqueous suspension. Metal nanoparticles supported on CNFs with a spherical shape and a mean size of 9 nm were confirmed by TEM, XRD, and SAXS. Functionalized films of HC-CNFs were obtained by adding a borate solution as a cross-linking agent. Solid-state ¹¹B NMR of films with different cross-linking degrees evidenced the presence of four different boron species of which the bis-chelate is responsible for the cross-linking of the CNFs. Also, it may be concluded that the bis-chelate and the mono-chelates modify the microstructure of the film increasing the water uptake and enhancing the catalytic activity in the reduction of 4-nitrophenol.

We report the synthesis of supported noble metal nanoparticles on cellulose nanofibers cross-linked with borate as highly efficient sustainable catalysts.

Growth of dispersed hydroxyapatite crystals highly intertwined with TEMPO-oxidized cellulose nanofiber

Hydroxyapatite was grown with TEMPO-oxidized cellulose nanofiber as gel template, providing a highly intertwined, dispersed crystalline composite among the fibers.

Arsenic(III) Removal by Nanostructured Dialdehyde Cellulose-Cysteine Microscale and Nanoscale Fibers

Arsenite (As(III)) contamination in drinking water has become a worldwide problem in recent years, which leads to development of various As(III) remediation approaches. In this study, two biomass-based nanostructured materials, microscale dialdehyde cellulose-cysteine (MDAC-cys) and nanoscale dialdehyde cellulose-cysteine (NDAC-cys) fibers, have been prepared from wood pulp. Their As(III) removal efficiencies and mechanism were determined by combined adsorption, atomic fluorescence spectrometry, microscopy (scanning electron microscopy, transmission electron microscopy, and atomic force microscopy), and spectroscopy (Fourier transform infrared, 13C CPMAS NMR) methods. The adsorption results of these materials could be well described by the Freundlich isotherm model, where the maximum adsorption capacities estimated by the Langmuir isotherm model were 344.82 mg/g for MDAC-cys and 357.14 mg/g for NDAC-cys, respectively. Both MDAC-cys and NDAC-cys materials were further characterized by X-ray diffraction and thermogravimetric analysis, where the results indicated that the thiol groups (the S content in MDAC-cys was 12.70 and NDAC-cys was 17.15%) on cysteine were primarily responsible for the adsorption process. The nanostructured MDAC-cys system appeared to be more suitable for practical applications because of its high cost-effectiveness.

Elastic Aerogels of Cellulose Nanofibers@Metal-Organic Frameworks for Thermal Insulation and Fire Retardancy

Metal-organic frameworks (MOFs) with high microporosity and relatively high thermal stability are potential thermal insulation and flame-retardant materials. However, the difficulties in processing and shaping MOFs have largely hampered their applications in these areas. This study outlines the fabrication of hybrid CNF@MOF aerogels by a stepwise assembly approach involving the coating and cross-linking of cellulose nanofibers (CNFs) with continuous nanolayers of MOFs. The cross-linking gives the aerogels high mechanical strength but superelasticity (80% maximum recoverable strain, high specific compression modulus of ~ 200 MPa cm³ g^-1, and specific stress of ~ 100 MPa cm³ g^-1). The resultant lightweight aerogels have a cellular network structure and hierarchical porosity, which render the aerogels with relatively low thermal conductivity of ~ 40 mW m^-1 K^-1. The hydrophobic, thermally stable MOF nanolayers wrapped around the CNFs result in good moisture resistance and fire retardancy. This study demonstrates that MOFs can be used as efficient thermal insulation and flame-retardant materials. It presents a pathway for the design of thermally insulating, superelastic fire-retardant nanocomposites based on MOFs and nanocellulose.

Microfibrillated Cellulose Suspension and Its Electrorheology

Microfibrillated cellulose (MFC) particles were synthesized by a low-pressure alkaline delignification process, and their shape and chemical structure were investigated by SEM and Fourier transformation infrared spectroscopy, respectively. As a novel electrorheological (ER) material, the MFC particulate sample was suspended in insulating oil to fabricate an ER fluid. Its rheological properties—steady shear stress, shear viscosity, yield stress, and dynamic moduli—under electric field strength were characterized by a rotational rheometer. The MFC-based ER fluid demonstrated typical ER characteristics, in which the shear stresses followed the Cho–Choi–Jhon model well under electric field strength. In addition, the solid-like behavior of the ER fluid was investigated with the Schwarzl equation. The elevated value of both dynamic and elastic yield stresses at applied electric field strengths was well described using a power law model (~E^1.5). The reversible and quick response of the ER fluid was also illustrated through the on–off test.

Green nanocomposite made with chitin and bamboo nanofibers and its mechanical, thermal and biodegradable properties for food packaging

This paper reports a green nanocomposite made by simply blending chitin nanofibers and bamboo cellulose nanofibers without chemically dissolving chitin and cellulose raw materials. Good biodegradability and biocompatibility of chitin in conjunction with good mechanical properties of cellulose are beneficial for developing green nanocomposite applicable for food packaging. The bamboo cellulose nanofiber (BACNF) is isolated by using a TEMPO-oxidation followed by an aqueous counter collision (ACC) method. Chitin nanofiber (CTNF) is isolated by using the ACC method. A simple blending is used to prepare the nanocomposite with different CTNF and BACNF concentration. Morphologies, mechanical properties, chemical interactions, thermal properties, water contact angles and biodegradability of the nanocomposite are investigated. The tensile strength and Young's modulus of the prepared nanocomposite increased up to 3 and 1.3 times, respectively as the BACNF concentration increase. The nanocomposite exhibites better thermal stability than the pure BACNF. Furthermore, the nanocomposite is fully biodegradable within a week. Good mechanical, thermal properties as well as biodegradability of the nanocomposite are promising for possible food packaging application.

Relaxation phenomenon and swelling behavior of regenerated cellulose fibers affected by water

Regenerated cellulose fibers are extremely sensitive to water; particularly, the mechanical properties are greatly affected by water. We examined the effect of water on regenerated cellulose fibers in respect of the relaxation phenomenon and swelling behavior. The peaks and shoulder of mechanical loss tangent δ were observed at room temperature and water regains of 56-78%. At the same time, the storage modulus markedly decreased around these water regains. Small angle X-ray scattering showed the maxima and shoulders in the wet state, which suggested that water decreased the density of the amorphous region and made space for the movement of polymer segments. It is possible that the glass transition temperatures of 510-550 K shift to room temperature at specific water regains. It is reasonable to suppose that water can penetrate into the amorphous region, loosening the interactions between cellulose molecules and widening the region, and in consequence decreasing the glass transition temperature.

Preparation and Applications of the Cellulose Nanocrystal

Cellulose widely existed in plants and bacteria, which takes important effect on the synthesis of macromolecule polymer material. Because of its great material properties, the cellulose nanocrystal (CNC) showed its necessary prospect in various industrial applications. As a renewable future material, the preparation methods of the CNC were reviewed in this paper. Meanwhile, the important applications of CNC in the field of composites, barrier film, electronics, and energy consumption were also mentioned with brief introductions. The summarized preparations and considerable applications provided operable ideas and methods for the future high-end and eco-friendly functional composites. Suggestions for potential applications were also discussed.

Highly absorbent cellulose nanofibrils aerogels prepared by supercritical drying

In this paper, strictly speaking aerogels of cellulose nanofibrils (CNFs) and TEMPO-oxidized CNFs (TO-CNFs) were obtained from an optimized supercritical drying processes and cryogels were prepared after freeze-drying. The cryogels and aerogels were characterized and the influence of the preparation process on the resulting properties was studied. Significant differences were observed in the micro- and nanoscale organization of the porous structures. In addition, the specific surface areas measured varied from 25 to 160 m² g^-1 for CNF materials, depending on the preparation process. Very high specific surface areas up to 482 m² g^-1 among the highest reported for pure cellulose nanofibrils porous materials were achieved for TO-CNF aerogels. Finally, in order to evaluate their aptitudes for wound dressings applications, the capillary water uptake capacities were assessed on skin mimicking layers. From this study, it was revealed that TO-CNF aerogels can absorb almost 120 times their own weight of water.