Glucose-responsive microgels integrated with enzyme nanocapsules for closed-loop insulin delivery

Boosting the Peroxidase-Like Activity of Nanostructured Nickel by Inducing Its 3+ Oxidation State in LaNiO3 Perovskite and Its Application for Biomedical Assays

Catalytic nanomaterials with intrinsic enzyme-like activities, called nanozymes, have recently attracted significant research interest due to their unique advantages relative to natural enzymes and conventional artificial enzymes. Among the nanozymes developed, particular interests have been devoted to nanozymes with peroxidase mimicking activities because of their promising applications in biosensing, bioimaging, biomedicine, etc. Till now, lots of functional nanomaterials have been used to mimic peroxidase. However, few studies have focused on the Ni-based nanomaterials for peroxidase mimics. In this work, we obtained the porous LaNiO₃ nanocubes with high peroxidase-like activity by inducing its 3+ oxidation state in LaNiO₃ perovskite and optimizing the morphology of LaNiO₃ perovskite. The peroxidase mimicking activity of the porous LaNiO₃ nanocubes with Ni³⁺ was about 58~fold and 22~fold higher than that of NiO with Ni²⁺ and Ni nanoparticles with Ni⁰. More, the porous LaNiO₃ nanocubes exhibited about 2-fold higher activity when compared with LaNiO₃ nanoparticles. Based on the superior peroxidase-like activity of porous LaNiO₃ nanocubes, facile colorimetric assays for H₂O₂, glucose, and sarcosine detection were developed. Our present work not only demonstrates a useful strategy for modulating nanozymes' activities but also provides promising bioassays for clinical diagnostics.

Long-Acting Release Formulation of Exendin-4 Based on Biomimetic Mineralization for Type 2 Diabetes Therapy

Exendin-4 has been clinically exploited for treating type 2 diabetes, but the short circulation half-life and multiple daily injections limit its widespread application with respect to poor patient compliance, low efficacy, and high treatment cost. In this study, a potent long-acting release system based on biomimetic mineralization was constructed for biocompatible and sustained exendin-4 delivery. Similar to natural biomineralization, exendin-4 can be mineralized to form nanosized mineral solids by means of the reaction between acidic amino acid residues and calcium ions in a supersaturated environment with negligible influence on peptide bioactivity. Mineralized exendin-4 particles may be spontaneously absorbed by a living body under physiologically supersaturated conditions, resulting in gradual dissociation and sustained drug release. In such a way, the glucose level of diabetic mice may be effectively controlled for a long period of time by mineralized exendin-4 without obvious side effects. We believe this biomimetic formulation can serve as a promising candidate for future clinical applications for type 2 diabetes therapies.

Red Blood Cells for Glucose-Responsive Insulin Delivery

Glucose-responsive delivery of insulin mimicking the function of pancreatic β-cells to achieve meticulous control of blood glucose (BG) would revolutionize diabetes care. Here the authors report the development of a new glucose-responsive insulin delivery system based on the potential interaction between the glucose derivative-modified insulin (Glc-Insulin) and glucose transporters on erythrocytes (or red blood cells, RBCs) membrane. After being conjugated with the glucosamine, insulin can efficiently bind to RBC membranes. The binding is reversible in the setting of hyperglycemia, resulting in fast release of insulin and subsequent drop of BG level in vivo. The delivery vehicle can be further simplified utilizing injectable polymeric nanocarriers coated with RBC membrane and loaded with Glc-Insulin. The described work is the first demonstration of utilizing RBC membrane to achieve smart insulin delivery with fast responsiveness.

Swallowing a Surgeon: Toward Clinical Nanorobots

In this Account, "a step toward clinical nanorobots" is proposed as one of the Holy Grails in chemistry, which could lead to a great leap in the field of biomedicines when accomplished. We review our preliminary contributions to this challenge by engineering chaperonin protein GroEL to generate de novo structures and functions.

Hypoxia and H2O2 Dual-Sensitive Vesicles for Enhanced Glucose-Responsive Insulin Delivery

A glucose-responsive closed-loop insulin delivery system mimicking pancreas activity without long-term side effect has the potential to improve diabetic patients' health and quality of life. Here, we developed a novel glucose-responsive insulin delivery device using a painless microneedle-array patch containing insulin-loaded vesicles. Formed by self-assembly of hypoxia and H₂O₂ dual-sensitive diblock copolymer, the glucose-responsive polymersome-based vesicles (d-GRPs) can disassociate and subsequently release insulin triggered by H₂O₂ and hypoxia generated during glucose oxidation catalyzed by glucose specific enzyme. Moreover, the d-GRPs were able to eliminate the excess H₂O₂, which may lead to free radical-induced damage to skin tissue during the long-term usage and reduce the activity of GOx. In vivo experiments indicated that this smart insulin patch could efficiently regulate the blood glucose in the chemically induced type 1 diabetic mice for 10 h.

Designing biopolymer microgels to encapsulate, protect and deliver bioactive components: Physicochemical aspects

Biopolymer microgels have considerable potential for their ability to encapsulate, protect, and release bioactive components. Biopolymer microgels are small particles (typically 100nm to 1000μm) whose interior consists of a three-dimensional network of cross-linked biopolymer molecules that traps a considerable amount of solvent. This type of particle is also sometimes referred to as a nanogel, hydrogel bead, biopolymer particles, or microsphere. Biopolymer microgels are typically prepared using a two-step process involving particle formation and particle gelation. This article reviews the major constituents and fabrication methods that can be used to prepare microgels, highlighting their advantages and disadvantages. It then provides an overview of the most important characteristics of microgel particles (such as size, shape, structure, composition, and electrical properties), and describes how these parameters can be manipulated to control the physicochemical properties and functional attributes of microgel suspensions (such as appearance, stability, rheology, and release profiles). Finally, recent examples of the utilization of biopolymer microgels to encapsulate, protect, or release bioactive agents, such as pharmaceuticals, nutraceuticals, enzymes, flavors, and probiotics is given.

H2O2-Responsive Vesicles Integrated with Transcutaneous Patches for Glucose-Mediated Insulin Delivery

A self-regulated "smart" insulin administration system would be highly desirable for diabetes management. Here, a glucose-responsive insulin delivery device, which integrates H₂O₂-responsive polymeric vesicles (PVs) with a transcutaneous microneedle-array patch was prepared to achieve a fast response, excellent biocompatibility, and painless administration. The PVs are self-assembled from block copolymer incorporated with polyethylene glycol (PEG) and phenylboronic ester (PBE)-conjugated polyserine (designated mPEG-b-P(Ser-PBE)) and loaded with glucose oxidase (GOx) and insulin. The polymeric vesicles function as both moieties of the glucose sensing element (GOx) and the insulin release actuator to provide basal insulin release as well as promote insulin release in response to hyperglycemic states. In the current study, insulin release responds quickly to elevated glucose and its kinetics can be modulated by adjusting the concentration of GOx loaded into the microneedles. In vivo testing indicates that a single patch can regulate glucose levels effectively with reduced risk of hypoglycemia.

NIR upconversion fluorescence glucose sensing and glucose-responsive insulin release of carbon dot-immobilized hybrid microgels at physiological pH

This work reports the preparation of multifunctional hybrid microgels based on the one-pot free radical dispersion polymerization of hydrogen-bonding complexes in water, formed from hydroxyl/carboxyl bearing carbon dots with 4-vinylphenylboronic acid and acrylamide comonomers, which can realize the simultaneous optical detection of glucose using near infrared light and glucose-responsive insulin delivery.

Stimuli-responsive polymers and their applications

Responsive polymer-based materials are capable of altering their chemical and/or physical properties upon exposure to external stimuli. This review highlights their use for sensing and biosensing, drug delivery, and artificial muscles/actuators.

Leveraging Physiology for Precision Drug Delivery

Physiological characteristics of diseases bring about both challenges and opportunities for targeted drug delivery. Various drug delivery platforms have been devised ranging from macro- to micro- and further into the nanoscopic scale in the past decades. Recently, the favorable physicochemical properties of nanomaterials, including long circulation, robust tissue and cell penetration attract broad interest, leading to extensive studies for therapeutic benefits. Accumulated knowledge about the physiological barriers that affect the in vivo fate of nanomedicine has led to more rational guidelines for tailoring the nanocarriers, such as size, shape, charge, and surface ligands. Meanwhile, progresses in material chemistry and molecular pharmaceutics generate a panel of physiological stimuli-responsive modules that are equipped into the formulations to prepare “smart” drug delivery systems. The capability of harnessing physiological traits of diseased tissues to control the accumulation of or drug release from nanomedicine has further improved the controlled drug release profiles with a precise manner. Successful clinical translation of a few nano-formulations has excited the collaborative efforts from the research community, pharmaceutical industry, and the public towards a promising future of smart drug delivery.

Electroporation for nanomedicine: a review

Here, we present a review of recent advances in electroporation for the delivery of nanomedicine as intracellular carriers by electroporation (NICE) in a drug format with functional nanoparticles.

Glucose-Responsive Insulin Delivery by Microneedle-Array Patches Loaded with Hypoxia-Sensitive Vesicles

In this chapter, we describe the preparation of glucose-responsive vesicles (GRVs) and the fabrication of GRV-loaded microneedle-array patches for insulin delivery. The GRVs were formed of hypoxia-sensitive hyaluronic acid (HS-HA), the synthesis of which is presented in detail. We also describe the procedure to evaluate the in vivo efficacy of this smart patch in a mouse model of chemically induced type 1 diabetes through transcutaneous administration.

Development of shell cross-linked nanoparticles based on boronic acid-related reactions for self-regulated insulin delivery

Shell cross-linked nanoparticles were fabricated by the complexation of poly(3-methacrylamido phenylboronic acid) (PMAPBA) and thiolated chitosan (chitosan-SH) via boronic acid-related reactions. The formation of PMAPBA/chitosan-SH nanoparticles was confirmed by transmission electron microscopy, dynamic light scattering, and UV spectroscopy. The nanoparticles had a narrow size distribution with a relatively high positive charge density, and the size and zeta potential of the nanoparticles correlated with the chitosan-SH concentration. Furthermore, owing to the cross-linking of the nanoparticle shell, insulin was encapsulated in the nanoparticles with a loading capacity of up to 18%. The release of insulin from the nanoparticles slowed down because of the presence of disulfide bonds and increased with increasing glucose level in the medium. The structure of the released insulin was not distorted. More importantly, the nanoparticles had good cytocompatibility, as demonstrated by in vitro experiments. The simplicity of this strategy along with a high loading capacity, glucose sensitivity, and cytocompatibility of the produced nanoparticles should significantly boost their application in self-regulated insulin delivery.

Stimuli-Responsive Delivery of Therapeutics for Diabetes Treatment

Diabetic therapeutics, including insulin and glucagon-like peptide 1 (GLP-1), are essential for diabetic patients to regulate blood glucose levels. However, conventional treatments that are based on subcutaneous injections are often associated with poor glucose control and a lack of patient compliance. In this review, we focus on the different stimuli-responsive systems to deliver therapeutics for diabetes treatment to improve patient comfort and prevent complications. Specifically, the pH-responsive systems for oral drug delivery are introduced first. Then, the closed-loop glucose-responsive systems are summarized based on different glucose-responsive moieties, including glucose oxidase (GOx), glucose binding protein (GBP), and phenylboronic acid (PBA). Finally, the on-demand delivery systems activated by external remote triggers are also discussed. We conclude by discussing advantages and limitations of current strategies, as well as future opportunities and challenges in this area.

Injectable and Glucose-Responsive Hydrogels Based on Boronic Acid-Glucose Complexation

Injectable hydrogels have been widely used for a number of biomedical applications. Here, we report a new strategy to form an injectable and glucose-responsive hydrogel using the boronic acid-glucose complexation. The ratio of boronic acid and glucose functional groups is critical for hydrogel formation. In our system, polymers with 10-60% boronic acid, with the balance being glucose-modified, are favorable to form hydrogels. These hydrogels are shear-thinning and self-healing, recovering from shear-induced flow to a gel state within seconds. More importantly, these polymers displayed glucose-responsive release of an encapsulated model drug. The hydrogel reported here is an injectable and glucose-responsive hydrogel constructed from the complexation of boronic acid and glucose within a single component polymeric material.

Enzyme-responsive multistage vector for drug delivery to tumor tissue

Various nanodelivery systems have been designed to release therapeutic agents upon contact with specific enzymes. However, enzyme-triggered release typically takes place in the tissue interstitium, thereby resulting in the extracellular delivery of drugs. Here, we have designed an enzyme-stimulated multistage vector (ESMSV), which enables stimulus-triggered release of drug-encapsulated nanoparticles from a microparticle. Specifically, polymeric nanoparticles with a surface matrix metalloproteinase-2 (MMP2) peptide substrate were conjugated to the surface of porous silicon microparticles. In the presence of MMP2, the polymeric nanoparticles were released into the tumor interstitium. This platform can be used to attain triggered drug release, while simultaneously facilitating the cellular internalization of drugs. The results indicate that nanoparticle release was MMP2-specific and resulted in improved intracellular uptake of hydrophobic agents in the presence of MMP2. Furthermore, in a mouse model of melanoma lung metastasis, systemic delivery of ESMSVs caused a substantial increase in intracellular accumulation of agents in cancer cells in comparison to delivery with non-stimulus-responsive particles.

Smart approaches to glucose-responsive drug delivery

A grand challenge in the field of "smart" drug delivery has been the quest to create formulations that can sense glucose and respond by delivering an appropriate dose of insulin. This approach, referred to as the "fully synthetic pancreas", envisions closed-loop insulin therapy. The strategies for incorporating glucose sensing into formulations can be broadly categorized into three subsets: enzymatic sensing, natural glucose-binding proteins and synthetic molecular recognition. Here, we highlight some examples of each of these approaches. The challenges remaining en route to the realization of closed-loop insulin therapy are substantial, and include improved response time, more authentic fidelity in glycemic control, improved biocompatibility for delivery materials and assurance of both safety and efficacy. The ubiquitous existence of glucose, combined with the unstable and toxic properties of insulin, further compound efforts towards the generation of a fully synthetic pancreas. However, given the growing incidence of both type-1 and type-2 diabetes, there is significant potential impact from the realization of such an approach on improving therapeutic management of the disease.

Enzyme coated beta-cyclodextrin for effective adsorption and glucose-responsive closed-loop insulin delivery

Inconsistent dosage of insulin (INS) for type 2 diabetes patients lead to severe adverse effects like limb amputation, blindness and fatal hypo or hyper glycaemia. Hence, a drug delivery system (DDS) capable of consistent INS release by sensing changes in blood glucose level is essential. Herein, we report a glucose responsive DDS comprised of oleic acid-grafted-aminated beta cyclodextrin (OA-g-ACD) copolymer, coated with a dispersion of glucose oxidase (GOx) and catalase (CAT). The prepared DDS was characterised using FTIR, Optical Microscopy, H(1) NMR, DLS and SEM. Hydrophobicity and drug loading capacity was ascertained using contact angle measurements and confocal laser scanning microscopy (CLSM) respectively. Extent of swelling was observed to be a function of glucose concentration. INS release profile showed a cumulative release of 78.0 % after 240min. Flow cytometry studies revealed greater population of INS on HeLa cells indicating application of DDS as potential candidate for the intravenous administration of INS.

Fabrication of Biobased Polyelectrolyte Capsules and Their Application for Glucose-Triggered Insulin Delivery

To enhance the glucose sensitivity and self-regulated release of insulin, biobased capsules with glucose-responsive and competitive properties were fabricated based on poly(γ-glutamic acid) (γ-PGA) and chitosan oligosaccharide (CS) polyelectrolytes. First, poly(γ-glutamic acid)-g-3-aminophenylboronic acid) (γ-PGA-g-APBA) and galactosylated chitosan oligosaccharide (GC) were synthesized by grafting APBA and lactobionic acid (LA) to γ-PGA and CS, respectively. The (γ-PGA-g-APBA/GC)5 capsules were then prepared by layer-by-layer (LBL) assembly of γ-PGA-g-APBA and GC via electrostatic interaction. The size and morphology of the particles and capsules were investigated by DLS, SEM, and TEM. The size of the (γ-PGA-g-APBA/GC)5 capsules increased with increasing glucose concentration due to the swelling of the capsules. The capsules could be dissociated at high glucose concentration due to the breaking of the cross-linking bonds between APBA and LA by the competitive reaction of APBA with glucose. The encapsulated insulin was able to undergo self-regulated release from the capsules depending on the glucose level and APBA composition. The amount of insulin release increased with incubation in higher glucose concentration and decreased with higher APBA composition. Moreover, the on-off regulation of insulin release from the (γ-PGA-g-APBA/GC)5 capsules could be triggered with a synchronizing and variation of the external glucose concentration, whereas the capsules without the LA functional groups did not show the on-off regulated release. Furthermore, the (γ-PGA-g-APBA/GC)5 capsules are biocompatible. These (γ-PGA-g-APBA/GC)5 with good stability, glucose response, and controlled insulin delivery are expected to be used for future applications to glucose-triggered insulin delivery.

In vivo pharmacokinetics, biodistribution and the anti-tumor effect of cyclic RGD-modified doxorubicin-loaded polymers in tumor-bearing mice

In our previous study, we successfully produced and characterized a multifunctional drug delivery system with doxorubicin (RC/GO/DOX), which was based on graphene oxide (GO) and cyclic RGD-modified chitosan (RC). Its characteristics include: pH-responsiveness, active targeting of hepatocarcinoma cells, and efficient loading with controlled drug release. Here, we report the pharmacokinetics, biodistribution, and anti-tumor efficacy of RC/GO/DOX polymers in tumor-bearing nude mice. The objective of this study is to assess its targeting potential for tumors. Pharmacokinetic and biodistribution profiles demonstrated that tumor accumulation of RC/GO/DOX polymers was almost three times higher than the others, highlighting the efficacy of the active targeting strategy. Furthermore, the tumor inhibition rate of RC/GO/DOX polymers was 56.64%, 2.09 and 2.93 times higher than that of CS/GO/DOX polymers (without modification) and the DOX solution, respectively. Anti-tumor efficacy results indicated that the tumor growth was better controlled by RC/GO/DOX polymers than the others. Hematoxylin and eosin (H&E) staining showed remarkable changes in tumor histology. Compared with the saline group, the tumor section from the RC/GO/DOX group revealed a marked increase in the quantity of apoptotic and necrotic cells, and a reduction in the quantity of the blood vessels. Together, these studies show that this new system could be regarded as a suitable form of DOX-based treatment of the hepatocellular carcinoma.

Methods for Generating Hydrogel Particles for Protein Delivery

Proteins represent a major class of therapeutic molecules with vast potential for the treatment of acute and chronic diseases and regenerative medicine applications. Hydrogels have long been investigated for their potential in carrying and delivering proteins. As compared to bulk hydrogels, hydrogel microparticles (microgels) hold promise in improving aspects of delivery owing to their less traumatic route of entry into the body and improved versatility. This review discusses common methods of fabricating microgels, including emulsion polymerization, microfluidic techniques, and lithographic techniques. Microgels synthesized from both natural and synthetic polymers are discussed, as are a series of microgels fashioned from environment-responsive materials.

Single-Molecule Encapsulation: A Straightforward Route to Highly Stable and Printable Enzymes

A mild, fast, and sequence-independent method for controlled enzyme immobilization is presented. This novel approach involves the encapsulation of single-enzyme molecules and the covalent attachment of these nanobiocatalysts onto surfaces. Fast and mild immobilization conditions, combined with low nonspecific adsorption on hydrophobic substrates, enables well-defined surface patterns via microcontact printing. The biohybrid materials show enhanced activity in organic solvents.

Inhibitor encapsulated, self-healable and cytocompatible chitosan multilayer coating on biodegradable Mg alloy: a pH-responsive design

The design of functional biomaterials that respond intelligently to external stimuli has become a rapidly growing area with widespread interest. This work contributes to the development of a feedback-active anticorrosion system with intriguing self-healing ability to protect magnesium (Mg) from biocorrosion. The system was constituted by an inner micro/nano-porous, ceramic-like pre-coating developed readily from the substrate, and an outermost inhibitor (nanosized cerium (Ce) oxides) containing chitosan (CS) multilayers. Here, the pre-coating acted as both an "anchoring" and a "barrier" layer to acquire structural integrity and improved impedance, respectively. Green CS served as cargo for Ce to be entrapped, harnessing Ce-NH₂ complexation chemistry. The coating barrier properties were evaluated by electrochemical impedance spectroscopy. The active corrosion inhibition was assessed by immersion degradation tests with respect to Mg²⁺ release, pH alteration, crack development, and scanning Kelvin potential. To our delight, the coatings effectively protected the substrate from biocorrosion in vitro compared with bare alloys. Putatively, the pH-triggered formation of Ce oxide precipitation, along with the pH-buffering activity and movable swelling capacity of CS macromolecules, should have contributed to restraining the anodic activity and healing the cracks/defects dynamically. Furthermore, the coated substrate had the biocompatibility to elicit better attachment and growth of osteoblasts.

Smart micro/nanoparticles in stimulus-responsive drug/gene delivery systems

New achievements in the realm of nanoscience and innovative techniques of nanomedicine have moved micro/nanoparticles (MNPs) to the point of becoming actually useful for practical applications in the near future. Various differences between the extracellular and intracellular environments of cancerous and normal cells and the particular characteristics of tumors such as physicochemical properties, neovasculature, elasticity, surface electrical charge, and pH have motivated the design and fabrication of inventive "smart" MNPs for stimulus-responsive controlled drug release. These novel MNPs can be tailored to be responsive to pH variations, redox potential, enzymatic activation, thermal gradients, magnetic fields, light, and ultrasound (US), or can even be responsive to dual or multi-combinations of different stimuli. This unparalleled capability has increased their importance as site-specific controlled drug delivery systems (DDSs) and has encouraged their rapid development in recent years. An in-depth understanding of the underlying mechanisms of these DDS approaches is expected to further contribute to this groundbreaking field of nanomedicine. Smart nanocarriers in the form of MNPs that can be triggered by internal or external stimulus are summarized and discussed in the present review, including pH-sensitive peptides and polymers, redox-responsive micelles and nanogels, thermo- or magnetic-responsive nanoparticles (NPs), mechanical- or electrical-responsive MNPs, light or ultrasound-sensitive particles, and multi-responsive MNPs including dual stimuli-sensitive nanosheets of graphene. This review highlights the recent advances of smart MNPs categorized according to their activation stimulus (physical, chemical, or biological) and looks forward to future pharmaceutical applications.

Glucose and magnetic-responsive approach toward in situ nitric oxide bubbles controlled generation for hyperglycemia theranostics

Stimuli-responsive devices that deliver drugs or imaging contrast agents in spatial-, temporal- and dosage-controlled fashions have emerged as the most promising and valuable platform for targeted and controlled drug delivery. However, implementing high performance of these functions in one single delivery carrier remains extremely challenging. Herein, we have developed a sequential strategy for developing glucose and magnetic-responsive microvesicle delivery system, which regulates the glucose levels and spatiotemporally controls the generation of nitric oxide gas free bubbles. It is observed that such injectable microvesicles loaded with enzyme and magnetic nanoparticles can firstly regulate hyperglycemic level based on the enzymatic reactions between glucose oxidase and glucose. In a sequential manner, concomitant magnetic field stimuli enhance the shell permeability while prompts the reaction between H2O2 and l-arginine to generate the gasotransmitters nitric oxide, which can be imaged by ultrasound and further delivered for diabetic nephropathy therapy. Therefore, magnetic microvesicles with glucose oxidase may be designed as a novel theranostic approach for restoring glucose homeostasis and spatiotemporally control NO release for maintaining good overall diabetic health.

Photo-Cross-Linked Scaffold with Kartogenin-Encapsulated Nanoparticles for Cartilage Regeneration

The regeneration of cartilage, an aneural and avascular tissue, is often compromised by its lack of innate abilities to mount a sufficient healing response. Kartogenin (KGN), a small molecular compound, can induce bone marrow-derived mesenchymal stem cells (BMSCs) into chondrocytes. The previous in vitro study showed that kartogenin also had a chondrogenesis effect on synovium derived mesenchymal stem cells (SMSCs). Herein, we present the effect of an ultraviolet-reactive, rapidly cross-linkable scaffold integrated with kartogenin-loaded nanoparticles using an innovational one-step technology. In vivo studies showed its potential role for cell homing, especially for recruiting the host's endogenous cells, including BMSCs and SMSCs, without cell transplantation. Of note, the regenerated tissues were close to the natural hyaline cartilage based on the histological tests, specific markers analysis, and biomechanical tests. This innovative KGN release system makes the chondrogenesis efficient and persistent.

Novel amino acid based nanogel conjugated suture for antibacterial application

In this study, a promising preparation strategy for antibacterial silk sutures with an l-lysine based nanogel grafting is reported.

Phenylboronic acid-based amphiphilic glycopolymeric nanocarriers for in vivo insulin delivery

Diabetes mellitus, a disorder of glucose regulation, is a global burden affecting millions of people across the world.

Preparation of glucose responsive polyelectrolyte capsules with shell crosslinking via the layer-by-layer technique and sustained release of insulin

(Alg/CS-g-CPBA_m)_n capsules were fabricated to study the effect of the capsule structure on the glucose sensitivity and sustained release of insulin.

Intelligent semi-IPN chitosan–PEG–PAAm hydrogel for closed-loop insulin delivery and kinetic modeling

Design of an intelligent semi-IPN chitosan–PEG–PAAm hydrogel using glucose oxidase (GOx) and catalase (CAT) to improve closed-loop insulin delivery systems.

Aptamer-functionalized DNA microgels: a strategy towards selective anticancer therapeutic systems

DNA microgels of oligonucleotides and polymers were constructed via a combination of DNA complementarity and photo-initiated free radical polymerization.

Micro- and nanoscale hierarchical structure of core–shell protein microgels

In this work, we fabricate core–shell protein microgels stabilized by protein fibrillation with hierarchical structuring on scales ranging from a few nanometers to tens of microns.

Smart nanosystems: Bio-inspired technologies that interact with the host environment

Nanoparticle technologies intended for human administration must be designed to interact with, and ideally leverage, a living host environment. Here, we describe smart nanosystems classified in two categories: (i) those that sense the host environment and respond and (ii) those that first prime the host environment to interact with engineered nanoparticles. Smart nanosystems have the potential to produce personalized diagnostic and therapeutic schema by using the local environment to drive material behavior and ultimately improve human health.

Block versus Random Amphiphilic Glycopolymer Nanopaticles as Glucose-Responsive Vehicles

To explore the effect of polymer structure on their self-assembled aggregates and their unique characteristics, this study was devoted to developing a series of amphiphilic block and random phenylboronic acid-based glycopolymers by RAFT polymerization. The amphiphilic glycopolymers were successfully self-assembled into spherically shaped nanoparticles with narrow size distribution in aqueous solution. For block and random copolymers with similar monomer compositions, block copolymer nanoparticles exhibited a more regular transmittance change with the increasing glucose level, while a more evident variation of size and quicker decreasing tendency in I/I0 behavior in different glucose media were observed for random copolymer nanoparticles. Cell viability of all the polymer nanoparticles investigated by MTT assay was higher than 80%, indicating that both block and random copolymers had good cytocompatibility. Insulin could be encapsulated into both nanoparticles, and insulin release rate for random glycopolymer was slightly quicker than that for the block ones. We speculate that different chain conformations between block and random glycopolymers play an important role in self-assembled nanoaggregates and underlying glucose-sensitive behavior.

Stretch-Triggered Drug Delivery from Wearable Elastomer Films Containing Therapeutic Depots

Mechanical force-based stimulus provides a simple and easily accessible manner for spatiotemporally controlled drug delivery. Here we describe a wearable, tensile strain-triggered drug delivery device consisting of a stretchable elastomer and microgel depots containing drug loaded nanoparticles. By applying a tensile strain to the elastomer film, the release of drug from the microdepot is promoted due to the enlarged surface area for diffusion and Poisson's ratio-induced compression on the microdepot. Correspondingly, both sustained drug release by daily body motions and pulsatile release by intentional administration can be conveniently achieved. Our work demonstrated that the tensile strain, applied to the stretchable device, facilitated release of therapeutics from microdepots for anticancer and antibacterial treatments. Moreover, polymeric microneedles were further integrated with the stretch-responsive device for transcutaneous delivery of insulin and regulation of blood glucose levels of chemically induced type 1 diabetic mice.

Boronate-Phenolic Network Capsules with Dual Response to Acidic pH and cis-Diols

Dual-responsive boronate-phenolic network (BPN) capsules are fabricated by the complexation of phenylborate and phenolic materials. The BPN capsules are stable in the presence of competing carbohydrates, but dissociate at acidic pH or in the presence of competing cis-diols at physiological pH. This engineered capsule system provides a platform for a wide range of biological and biomedical applications.

Spatiotemporal drug delivery using laser-generated-focused ultrasound system

Laser-generated-focused ultrasound (LGFU) holds promise for the high-precision ultrasound therapy owing to its tight focal spot, broad frequency band, and stable excitation with minimal ultrasound-induced heating. We here report the development of the LGFU as a stimulus for promoted drug release from microgels integrated with drug-loaded polymeric nanoparticles. The pulsed waves of ultrasound, generated by a carbon black/polydimethylsiloxane (PDMS)-photoacoustic lens, were introduced to trigger the drug release from alginate microgels encapsulated with drug-loaded poly(lactic-co-glycolic acid) (PLGA) nanoparticles. We demonstrated the antibacterial capability of this drug delivery system against Escherichia coli by the disk diffusion method, and antitumor efficacy toward the HeLa cell-derived tumor spheroids in vitro. This novel LGFU-responsive drug delivery system provides a simple and remote approach to precisely control the release of therapeutics in a spatiotemporal manner and potentially suppress detrimental effects to the surrounding tissue, such as thermal ablation.