Functionalized graphene sheets for polymer nanocomposites

Layered nanocomposites by shear-flow-induced alignment of nanosheets

Biological materials, such as bones, teeth and mollusc shells, are well known for their excellent strength, modulus and toughness^1-3. Such properties are attributed to the elaborate layered microstructure of inorganic reinforcing nanofillers, especially two-dimensional nanosheets or nanoplatelets, within a ductile organic matrix^4-6. Inspired by these biological structures, several assembly strategies-including layer-by-layer^4,7,8, casting^9,10, vacuum filtration^11-13 and use of magnetic fields^14,15-have been used to develop layered nanocomposites. However, how to produce ultrastrong layered nanocomposites in a universal, viable and scalable manner remains an open issue. Here we present a strategy to produce nanocomposites with highly ordered layered structures using shear-flow-induced alignment of two-dimensional nanosheets at an immiscible hydrogel/oil interface. For example, nanocomposites based on nanosheets of graphene oxide and clay exhibit a tensile strength of up to 1,215 ± 80 megapascals and a Young's modulus of 198.8 ± 6.5 gigapascals, which are 9.0 and 2.8 times higher, respectively, than those of natural nacre (mother of pearl). When nanosheets of clay are used, the toughness of the resulting nanocomposite can reach 36.7 ± 3.0 megajoules per cubic metre, which is 20.4 times higher than that of natural nacre; meanwhile, the tensile strength is 1,195 ± 60 megapascals. Quantitative analysis indicates that the well aligned nanosheets form a critical interphase, and this results in the observed mechanical properties. We consider that our strategy, which could be readily extended to align a variety of two-dimensional nanofillers, could be applied to a wide range of structural composites and lead to the development of high-performance composites.

Strength of Graphene-Coated Ni Bi-Crystals: A Molecular Dynamics Nano-Indentation Study

Nanoindentation simulations are performed for a Ni(111) bi-crystal, in which the grain boundary is coated by a graphene layer. We study both a weak and a strong interface, realized by a 30∘ and a 60∘ twist boundary, respectively, and compare our results for the composite also with those of an elemental Ni bi-crystal. We find hardening of the elemental Ni when a strong, i.e., low-energy, grain boundary is introduced, and softening for a weak grain boundary. For the strong grain boundary, the interface barrier strength felt by dislocations upon passing the interface is responsible for the hardening; for the weak grain boundary, confinement of the dislocations results in the weakening. For the Ni-graphene composite, we find in all cases a weakening influence that is caused by the graphene blocking the passage of dislocations and absorbing them. In addition, interface failure occurs when the indenter reaches the graphene, again weakening the composite structure.

Fatigue of graphene

Materials can suffer mechanical fatigue when subjected to cyclic loading at stress levels much lower than the ultimate tensile strength, and understanding this behaviour is critical to evaluating long-term dynamic reliability. The fatigue life and damage mechanisms of two-dimensional (2D) materials, of interest for mechanical and electronic applications, are currently unknown. Here, we present a fatigue study of freestanding 2D materials, specifically graphene and graphene oxide (GO). Using atomic force microscopy, monolayer and few-layer graphene were found to exhibit a fatigue life of more than 10⁹ cycles at a mean stress of 71 GPa and a stress range of 5.6 GPa, higher than any material reported so far. Fatigue failure in monolayer graphene is global and catastrophic without progressive damage, while molecular dynamics simulations reveal this is preceded by stress-mediated bond reconfigurations near defective sites. Conversely, functional groups in GO impart a local and progressive fatigue damage mechanism. This study not only provides fundamental insights into the fatigue enhancement behaviour of graphene-embedded nanocomposites, but also serves as a starting point for the dynamic reliability evaluation of other 2D materials.

Fabrication of high-performance nickel/graphene oxide composite coatings using ultrasonic-assisted electrodeposition

Ultrasonic-assisted electrodeposition was used to fabricate the nickel/graphene oxide composite coatings with high hardness, low friction coefficient, and high wear resistance. In the present study, the effects of ultrasonic power and concentration of graphene oxide on the mechanical and tribological properties of the electrodeposited nickel/graphene oxide composite coatings were systematically studied. X-ray diffraction (XRD) analyses showed that the crystallite size of the nickel decreased with an increase of ultrasonic power (0-50 W, 40 KHz, square wave) and concentration of graphene oxide (0.1-0.4 g/L). Morphologies of the surface and cross-section of the composite coatings observed by Scanning Electron Microscopy (SEM) confirmed the existence of graphene oxide particles in the nickel matrix. The results from microhardness measurement demonstrated that the hardness was increased by 1.8 times using 50 W ultrasonic-assisted electrodeposition with the fixed concentration of graphene oxide (0.1 g/L), compared to the pure nickel coating. The hardness was increased by 4.4 times for the 0.4 g/L graphene oxide with the optimized ultrasonic power of 50 W in comparison to the pure nickel coating. Meanwhile, the friction coefficient decreased gradually with an increase in ultrasonic power and concentration of graphene oxide, respectively, where the effect of the concentration of graphene oxide played a more important role.

Exposure of Smaller and Oxidized Graphene on Polyurethane Surface Improves its Antimicrobial Performance

Catheter-related infections are a common worldwide health problem, highlighting the need for antimicrobial catheters. Here, antibacterial potential of graphene nanoplatelets (GNP) incorporated in the commonly used polymer for catheter manufacture-polyurethane (PU)-is investigated. Two strategies are explored: melt-blending, producing a composite, and dip coating, where a composite layer is deposited on top of PU. GNP with different lateral sizes and oxidation degrees-GNP-M5, GNP-M15, GNP-M5ox, GNP-M15ox-are applied in both strategies, and the antimicrobial potential towards Staphylococcus epidermidis of GNP dispersions and GNP-containing PU evaluated. As dispersions, oxidized and smaller GNP powders (GNP-M5ox) inhibit 74% bacteria growth at 128 µg/mL. As surfaces, GNP exposure strongly impacts their antimicrobial profile: GNP absence at the surface of composites yields no significant effects on bacteria, while by varying GNP: PU ratio and GNP concentration, coatings enhance GNP exposure, depicting an antimicrobial profile. Oxidized GNP-containing coatings induce higher antibacterial effect than non-oxidized forms, particularly with smaller GNPox, where a homogeneous layer of fused platelets is formed on PU, leading to 70% reduction in bacterial adhesion and 70% bacterial death. This pioneering work unravels how to turn a polymer clinically used to produce catheters into an antimicrobial surface, crucial to reducing risk of infection associated with catheterization.

Improving the Performance of Feather Keratin/Polyvinyl Alcohol/Tris(hydroxymethyl)Aminomethane Nanocomposite Films by Incorporating Graphene Oxide or Graphene

In this study, feather keratin/polyvinyl alcohol/tris(hydroxymethyl)aminomethane (FK/PVA/Tris) bionanocomposite films containing graphene oxide (GO) (0.5, 1, 2, and 3 wt%) or graphene (0.5, 1, 2, and 3 wt%) were prepared using a solvent casting method. The scanning electron microscopy results indicated that the dispersion of GO throughout the film matrix was better than that of graphene. The successful formation of new hydrogen bonds between the film matrix and GO was confirmed through the use of Fourier-transform infrared spectroscopy. The tensile strength, elastic modulus, and initial degradation temperature of the films increased, whereas the total soluble mass, water vapor permeability, oxygen permeability, and light transmittance decreased following GO or graphene incorporation. In summary, nanoblending is an effective method to promote the application of FK/PVA/Tris-based blend films in the packaging field.

Merging versatile polymer chemistry with multifunctional nanoparticles: an overview of crosslinkable aromatic polyester matrix nanocomposites

The current trend in the global advanced material market is expeditiously shifting towards more lightweight, multifunctional configurations, considering very recent developments in electrical aircraft, biomedical devices, and autonomous automobiles. Hence, the development of novel polymer nanocomposite materials is critical to advancing the current state-of-the-art of structural material technologies to address the pressing performance demands. Aiming at expanding the existing material design space, we have investigated crosslinkable aromatic polyester matrix nanocomposites. Aromatic polyesters, in the thermosetting form, are a prospective high-performance/high-temperature polymer technology, which is on a par with conventional epoxy-derivative resins and high-performance engineering thermoplastics in the range of their potential applications. The aromatic matrix-based thermosetting nanocomposites manifest greatly enhanced physical properties enabled by a chemistry-favored robust interfacial covalent coupling mechanism developed during the in situ polymerization reaction with various nanofiller particle configurations. Here, we provide a summary review of our recent efforts in developing this novel polymer nanocomposite material system. We highlight the chemical strategy, fabrication approach, and processing techniques developed to obtain various nanocomposite representations for structural, electrical, optical, biomedical, and tribological applications. The unique characteristic features emerging in the nanocomposite morphologies, along with their physicochemical effects on the multifunctional macroscale properties, are demonstrated. This unique matrix configuration introduces superior performance elements to polymer nanocomposite applications towards designing advanced composite materials.

Mechanisms of mechanical reinforcement by graphene and carbon nanotubes in polymer nanocomposites

Polymer nanocomposites reinforced with carbon-based nanofillers are gaining increasing interest for a number of applications due to their excellent properties. The understanding of the reinforcing mechanisms is, therefore, very important for the maximization of performance. This present review summarizes the current literature status on the mechanical properties of composites reinforced with graphene-related materials (GRMs) and carbon nanotubes (CNTs) and identifies the parameters that clearly affect the mechanical properties of the final materials. It is also shown how Raman spectroscopy can be utilized for the understanding of the stress transfer efficiency from the matrix to the reinforcement and it can even be used to map stress and strain in graphene. Importantly, it is demonstrated clearly that continuum micromechanics that was initially developed for fibre-reinforced composites is still applicable at the nanoscale for both GRMs and CNTs. Finally, current problems and future perspectives are discussed.

Microstructure and Mechanical Performance of Graphene Nanosheets Reinforced Nickel-Based Superalloy FGH95 Composite

Graphene nanosheet (GNS)-reinforced nickel-based superalloy FGH95 (GNSs/FGH95) matrix composites are prepared via the powder metallurgy approach. Scanning electron microscopy, transmission electron microscope and static tensile tests are used to investigate the microstructure and mechanical properties of GNS-reinforced nickel-based superalloy FGH95. Mechanical properties and failure behavior at room temperature and high temperature are studied. Static tensile tests at room temperature and high temperature confirm that the strength and plasticity of GNS-reinforced FGH95 have been improved, compared to the unreinforced superalloy. The results show that with the increase of temperature, the failure behavior of GNSs/FGH95 composite changes from the interface debonding of the GNSs/matrix to the failure of the FGH95 matrix. This work suggests that GNSs/FGH95 composite has great potential to be a structural material in aero-engine fields.

Graphene oxide/waterborne polyurethane nanocoatings: effects of graphene oxide content on performance properties

Graphene oxide (GO) is a good nanofiller candidate for waterborne coatings because of its outstanding physical and mechanical properties, good dispersibility in water, and low cost relative to graphene. Here, we report on the performance of a one-part, waterborne polyurethane (WPU) nanocoating formulated with four different GO loadings ([0.4% to 2.0%] by mass). The degree of GO dispersion/adhesion was evaluated using scanning electron microscopy, laser scanning confocal microscopy, and Raman microscopy. Nanocoating performance was evaluated using a dynamic mechanical thermal analyzer for mechanical properties, a customized coulometric permeation apparatus for oxygen barrier properties, a combustion microcalorimeter for flammability, a hot disk analyzer for thermal conductivity, thermogravimetric analysis for thermal stability, and a moisture sorption analyzer for water uptake. The results show that GO sheets were well dispersed in, and have good adhesion to, WPU. At the higher mass loadings ([1.2% or 2%] by mass), GO increased the modulus and yield strength of WPU by 300% and 200%, respectively, increased the thermal conductivity by 38%, reduced the burning heat release rate (flammability) by 43%, and reduced the oxygen permeability by up to sevenfold. The presence of GO, however, increased water vapor uptake at high humidity; the moisture content of 2% mass loading GO/WPU nanocoatings at 90% RH was almost twice that of the moisture content for unfilled WPU. Overall, with the exception of water uptake at very high humidity (> 70% RH), the observed improvements in physical and mechanical properties combined with the ease of processing suggest that GO is a viable nanofiller for WPU coatings.

Friction and mechanical properties of amino-treated graphene-filled epoxy composites: modification conditions and filler content

It remains a challenge for graphene to reach its full potential as a lubricant and wear-resistant material in thermosetting resin composites. In this study, the mechanical properties and friction properties of amino-treated graphene-filled epoxy composites, which were influenced by the conditions for the modification of graphene and filler content, were investigated. The mechanical properties were measured by tensile examination and the tribological properties were determined using a ball-on-disk tribometer. The results showed that the composite filled with amino-treated graphene for a short reaction time exhibited the best tribological behavior, where the friction coefficient was 57.9% lower than that of the pure resin and the wear rate was 92.2% less than that of the neat resin. Simultaneously, this amino-treated graphene also resulted in enhanced mechanical properties and T_g in the nanocomposite, implying its good crosslinking network and strong interface strength. The wear track analysis demonstrated that the excellent wear resistance was induced by its improved toughness, which restrained the crack propagation of fatigue wear and decreased the size of debris, promoting the formation of a transfer film, and thus protecting the contact surface. The tribological properties also varied with the concentration of the nanofiller, which showed the best performance at 0.2 wt%. Through the optimization of the modification conditions and concentration, this work highlights a promising strategy for the application of graphene-related materials in the field of tribology.

The enhancement in resistance to the propagation of cracks in epoxy composites by adding GO-0.5 results in excellent wear resistance.

Facile synthesis of novel reduced graphene oxide@polystyrene nanospheres for sensitive label-free electrochemical immunoassay

Nanosized reduced graphene oxide@polystyrene nanospheres were first synthesized and further exploited for highly sensitive label-free electrochemical immunoassay applications.

Polymer/Metal Organic Framework (MOF) Nanocomposites for Biomedical Applications

The utilization of polymer/metal organic framework (MOF) nanocomposites in various biomedical applications has been widely studied due to their unique properties that arise from MOFs or hybrid composite systems. This review focuses on the types of polymer/MOF nanocomposites used in drug delivery and imaging applications. Initially, a comprehensive introduction to the synthesis and structure of MOFs and bio-MOFs is presented. Subsequently, the properties and the performance of polymer/MOF nanocomposites used in these applications are examined, in relation to the approach applied for their synthesis: (i) non-covalent attachment, (ii) covalent attachment, (iii) polymer coordination to metal ions, (iv) MOF encapsulation in polymers, and (v) other strategies. A critical comparison and discussion of the effectiveness of polymer/MOF nanocomposites regarding their synthesis methods and their structural characteristics is presented.

Influence of reduced graphene oxide on flow behaviour, glass transition temperature and secondary crystallinity of plasticized poly(vinyl chloride)

Understanding the rheological behaviour of thermoplastic nanocomposites is important to obtain a concrete knowledge of their processability. The viscoelastic properties of nanocomposites are a reflection of their morphology. The study of flow and deformation of nanocomposites provides essential information related to prevalent interactions in the system as well as contribution from the dispersion of incorporated nanofillers. In the present study, plasticized polyvinyl chloride/reduced graphene oxide nanocomposites (PPVC/RGO) were fabricated using melt mixing technique with different filler concentration. Flow behaviour of the nanocomposites was analyzed using small amplitude oscillatory shear (SAOS) measurements and it indicated an enhancement in the storage modulus (G′), loss modulus (G′′) and complex viscosity (η*) with RGO content. This can be attributed to very good dispersion and reinforcing effect of RGO in PPVC matrix as supported by TEM and FTIR results. Weak gel model is used to fit the rheological parameters and is found to be in excellent agreement with the SAOS experiments. Thermal history of the prepared nanocomposites was learned using differential scanning calorimetry. A shift in glass transition temperature (T_g) to higher temperature region could be seen, that manifest the effect of RGO in the amorphous portion of PPVC. An interesting property called secondary crystallinity was also found in these materials.

Understanding the rheological behaviour of thermoplastic nanocomposites is important to obtain a concrete knowledge of their processability.

Enhancing the mechanical and thermal properties of waterborne polyurethane composites with thermoset epoxy resin microspheres

A facile way to prepare WPU with good mechanical and thermal properties by adding epoxy microspheres.

Aluminum nanocomposites reinforced with monolayer polyaniline (C3N): assessing the mechanical and ballistic properties

This study unveils C₃N, a new material that serves as an excellent reinforcement to enhance the mechanical properties of aluminum using a molecular dynamics simulation method. Results show that the C₃N nanosheets greatly improve the mechanical properties of aluminum-based nanocomposites. With only 1.3 wt% C₃N, the Young's modulus, fracture strength, and fracture strain increased by 27, 70, and 51 percent, respectively. A comparison between the reinforcement of graphene and C₃N in an aluminum (Al) matrix shows that in terms of the mechanical properties, the graphene–aluminum composite is weaker than the C₃N–aluminum composite in the tensile tests, but slightly stronger in the energy adsorption tests. Our findings show that the mechanical properties are highly dependent on the strain rate and temperature. The effects of various imperfections, such as the vacancy, crack, and void defects, on the mechanical properties were also studied. Results show that in the presence of void defects, the structure exhibited higher mechanical properties than when there were other defects. This phenomenon was found to be related to the decrease in the effective load transfer from aluminum to C₃N. Furthermore, by increasing the weight percent of the nanosheets up to 5%, the energy absorption rate increased by 25% compared to the pure aluminum. When C₃N was placed on top of the aluminum surface, the silicon nanoparticles were associated with a 35% energy adsorption by the nanocomposite. The results of this paper could be used to help understand and overcome some limitations in the fabrication of metallic nanocomposites with 2D material reinforcement.

This study unveils C₃N, a new material that serves as an excellent reinforcement to enhance the mechanical properties of aluminum using a molecular dynamics simulation method.

Two-Dimensional Nanomaterials-Based Polymer Composites: Fabrication and Energy Storage Applications

Polymers have been widely used for their low density, low cost, corrosion resistance, easy design, and processing. The addition of nanomaterials into polymer matrices has been studied for a long history due to their enhancement on properties of polymers, such as the electrical conductivity, thermal conductivity, corrosion resistance, and wear resistance. Two-dimensional materials, a new class of nanomaterials, have been intensively studied as a filler for polymer composites in recent years, which can significantly enhance the performance at even extremely small loading. In this review, firstly, the preparing and modifying method of 2D materials, such as graphene, graphene oxide, and hexagonal boron nitride, as a filler for polymer composites are organized. The related dispersion methods of 2D materials in the polymers, surface treatments of 2D materials, interface bonding between 2D materials and polymers are discussed alongside. Secondly, the applications of 2D materials/polymer composites for energy storage in lithium ion battery separators and supercapacitors are summarized. Finally, we have concluded the challenges in preparing 2D materials/polymer composites, and future perspectives for using this class of new composites have also been discussed.

Cucurbit[8]uril-Derived Graphene Hydrogels

The scalable production of uniformly distributed graphene (GR)-based composite materials remains a sizable challenge. While GR-polymer nanocomposites can be manufactured at a large scale, processing limitations result in poor control over the homogeneity of hydrophobic GR sheets in the matrices. Such processes often result in difficulties controlling stability and avoiding aggregation, therefore eliminating benefits that might have otherwise arisen from the nanoscopic dimensions of GR. Here, we report an exfoliated and stabilized GR dispersion in water. Cucurbit[8]uril (CB[8])-mediated host-guest chemistry was used to obtain supramolecular hydrogels consisting of uniformly distributed GR and guest-functionalized macromolecules. The obtained GR hydrogels show superior bioelectrical properties over identical systems produced without CB[8]. Utilizing such supramolecular interactions with biologically derived macromolecules is a promising approach to stabilize graphene in water and avoid oxidative chemistry.

3D Printing of Covalent Functionalized Graphene Oxide Nanocomposite via Stereolithography

A major challenge for many industries wanting to adopt 3D printing technologies for rapid prototyping, customized parts, and low-volume manufacturing depends on the availability and functionality of the input materials to suit specific requirements. A well-studied nanofiller because of its distinct properties and wide range of applications, graphene oxide (GO) proves to be a good choice in the development of new materials. However, as a filler in a polymer matrix, GO has its own unique set of problems enough to make certain constraints in achieving an optimum reinforcement in the targeted polymer matrix. The need for a matrix-filler interaction is critical because reinforcement occurs only when the external load applied to the material can be successfully transmitted from the matrix to the filler, which will only happen if the interfacial adhesion between the matrix and the filler is strong. This study demonstrates the synthesis of the covalently linked GO-methacrylate (MA) nanocomposite materials through 3D printing via stereolithography (SL). Spectral analysis using Fourier-transform infrared confirms the successful functionalization of GO and ascertains the presence of the functionalized GO (fGO) in the 3D-printed nanocomposite specimens. Likewise, further validation using thermogravimetric analysis and differential scanning calorimetry also affirms the formation of fGO for use as a functional filler, activating a stronger interfacial bonding with the MA polymer. Excellent attributes of GO will become futile because of premature fracturing of the material simply because of an oversight to consider robustness during the early stages of design. Hence, different mechanical and thermal properties of the new 3D-printed MA-fGO nanocomposite material are characterized and presented in the discussion. This work demonstrates the first successful 3D printing of the functionalized GO nanocomposite via SL, forming a complex structure with consistently high fidelity and enhanced material properties with potential for various industrial applications.

Lightweight, mechanically flexible and thermally superinsulating rGO/polyimide nanocomposite foam with an anisotropic microstructure

We report that lightweight, anisotropic, mechanically flexible, and high performance thermally insulating materials are fabricated by the assembly of graphene oxide (GO) and polyimide (PI). With an appropriate ratio between GO and PI building blocks, the rGO/PI thermally insulating material exhibits hierarchically aligned microstructures with high porosity. These microstructures endow the rGO/PI nanocomposite with low mass density and super-insulating property (extremely low thermal conductivity of 0.012 W m^-1 K^-1 in the radial direction). Meanwhile, the introduction of PI enhances the mechanical strength and thermal stability of rGO foam. Our rGO/PI nanocomposites as super-insulating foams with a low thermal conductivity are highly attractive for potential thermal insulation applications in aerospace, wearable devices, and energy-efficient buildings.

Bending and Elastic Vibration of a Novel Functionally Graded Polymer Nanocomposite Beam Reinforced by Graphene Nanoplatelets

A novel functionally graded (FG) polymer-based nanocomposite reinforced by graphene nanoplatelets is proposed based on a new distribution law, which is constructed by the error function and contains a gradient index. The variation of the gradient index can result in a continuous variation of the weight fraction of graphene nanoplatelets (GPLs), which forms a sandwich structure with graded mechanical properties. The modified Halpin–Tsai micromechanics model is used to evaluate the effective Young’s modulus of the novel functionally graded graphene nanoplatelets reinforced composites (FG-GPLRCs). The bending and elastic vibration behaviors of the novel nanocomposite beams are investigated. An improved third order shear deformation theory (TSDT), which is proven to have a higher accuracy, is implemented to derive the governing equations related to the bending and vibrations. The Chebyshev–Ritz method is applied to describe various boundary conditions of the beams. The bending displacement, stress state, and vibration frequency of the proposed FG polymer-based nanocomposite beams under uniformly distributed loads are provided in detail. The numerical results show that the proposed distributions of GPL nanofillers can lead to a more effective pattern of improving the mechanical properties of GPL-reinforced composites than the common ones.

Hydroxyl-Terminated Triazine Derivatives Grafted Graphene Oxide for Epoxy Composites: Enhancement of Interfacial and Mechanical Properties

An effective approach to the fabrication of progressive epoxy nanocomposites by the incorporation of hydroxyl-terminated dendrimers functionalized graphene oxide (GO-TCT-Tris) is reported. The relationship between surface grafting, chemical construction, morphology, dispersion, and interfacial interaction as well as the corresponding mechanical properties of the composites were studied in detail. It was shown that hydroxyl-terminated triazine derivatives have been resoundingly bonded onto the GO surface through covalent bonding, which effectively improved the dispersion and compatibility of GO sheets in epoxy resin. The tensile and flexural tests manifested that the GO-TCT-Tris/epoxy composites exhibited greater tensile/flexural strength and modulus than either the pure epoxy or the GO/epoxy composites. For GO-TCT-Tris (0.10 wt%)/epoxy composite, the tensile strength and elastic modulus increased from 63 ± 4 to 89 ± 6 MPa (41.27%) and from 2.8 ± 0.1 to 3.6 ± 0.2 GPa (28.57%), and the flexural strength and modulus increased from 106 ± 5 to 158 ± 6 MPa (49.06%) and from 3.0 ± 0.1 to 3.5 ± 0.2 GPa (16.67%), respectively, compared to the pure epoxy matrix. Moreover, the fractographic analysis also illustrated the ameliorative interfacial interaction between GO-TCT-Tris and epoxy matrix.

Investigation of the properties of nanographene in polymer nanocomposites through molecular simulations: dynamics and anisotropic Brownian motion

The dynamical behavior of nanographene sheets dispersed in polymer matrices is investigated through united-atom molecular dynamics simulations. The Brownian motion of the sheet and the anisotropy in its translational and orientational diffusion are the topics of the current study. Different polymer matrices and pristine and functionalized graphene constitute various nanocomposite systems. Interactions between the nanographene flake and the matrix determine the dynamics of the systems. The dynamics is reduced in polyethylene oxide compared to polyethylene matrix, whereas carboxylated sheets move considerably slower than the pristine nanographene in any matrix. Diffusion is anisotropic for short times, while it becomes isotropic in the long time limit. The in-plane motion of the nanographene sheet is faster than the out-of-plane component, in agreement with the diffusion of perfectly oblate ellipsoids. In functionalized graphene, the anisotropy is suppressed. By exploring the temperature effect on both the nanographene sheet and polymer close to the surface, indications for coupling in the motion of the two components are revealed. The strong effect of edge functional groups on the dynamics can be used as a way to control the Brownian motion of nanographene sheets in polymer nanocomposites and consequently tailor the properties of the materials.

A Safe-by-Design Strategy towards Safer Nanomaterials in Nanomedicines

The marriage of nanotechnology and medicine offers new opportunities to fight against human diseases. Benefiting from their unique optical, thermal, magnetic, or redox properties, a wide range of nanomaterials have shown potential in applications such as diagnosis, drug delivery, or tissue repair and regeneration. Despite the considerable success achieved over the past decades, the newly emerging nanomedicines still suffer from an incomplete understanding of their safety risks, and of the relationships between their physicochemical characteristics and safety profiles. Herein, the most important categories of nanomaterials with clinical potential and their toxicological mechanisms are summarized, and then, based on this available information, an overview of the principles in developing safe-by-design nanomaterials for medical applications and of the recent progress in this field is provided. These principles may serve as a starting point to guide the development of more effective safe-by-design strategies and to help identify the major knowledge and skill gaps.

A review on exfoliation, characterization, environmental and energy applications of graphene and graphene-based composites

Because of an atom-thick two-dimensional structure with sp² hybridization, large specific area, high thermal conductivity, superior electron mobility, and chemical stability, graphene (GN) has developed substantial interest among researchers, exponentially accelerating GN based research. GN and its derivatives are the potentially attractive materials to develop composites for energy and environmental applications. This review covered a general overview on physical and chemical properties of GN and based composite materials, briefly summarizing exfoliation methodologies and characterization techniques in the first section. The environmental applications of GN and GN composites in detection of gases, bacteria as well as in the removal of organic and inorganic pollutants were comprehensively addressed in the second section. Third section focused on recent progress associated with the applications of GN and its composites in solar energy conversion, electrochemical energy devices, storage and production of hydrogen. Finally, conclusive remarks emphasizing unresolved problems and major future challenges were covered in the last section. In addition, the prospects and further development of GN and GN composites in energy, environment and bioscience were discussed.

Robust, Lightweight, Hydrophobic, and Fire-Retarded Polyimide/MXene Aerogels for Effective Oil/Water Separation

Polyimide (PI) aerogels have attracted great attention owing to their low density and excellent thermal stability. However, hydrophobic surface modification is required for PI aerogels to improve their ability in oil/water separation due to their amphiphilic characteristic. Two-dimensional MXenes (transition metal carbides/nitrides) can be utilized as nanofillers to enhance the properties of polymers because of their unique layered structure and versatile interface chemistry. Herein, the robust, lightweight, and hydrophobic PI/MXene three-dimensional architectures were fabricated via freeze-drying of polyamide acid/MXene suspensions and thermal imidization. Polyamide acid was synthesized using N-N-dimethylacetamide and 4,4'-oxydianiline. MXene (Ti₃C₂T_x) dispersion was obtained via the etching of Ti₃AlC₂ and ultrasonic exfoliation. Taking advantage of the strong interaction between PI chains and MXene nanosheets, the interconnected, highly porous, and hydrophobic PI/MXene aerogels with low density were fabricated, resulting in the improved compressive performance, remarkable oil absorption capacity, and efficient separation of oil and water. For the PI/MXene-3 aerogel (weight ratio, 5.2:1) without any surface modification, the water contact angle was 119° with a density of 23 mg/cm³. This aerogel can completely recover to its original height after 50 compression-release cycles, exhibiting superelasticity and exceptional fatigue-resistant ability. It also showed high absorption capacities to various organic liquids ranging from approximately 18 to 58 times of their own weight. This hybrid aerogel can rapidly separate the chloroform, soybean oil, and liquid paraffin from the water-oil system. The thermally stable hybrid aerogel also exhibited excellent fire safety properties and outstanding reusability under an extreme environment.

Functional Properties of Poly(Trimethylene Terephthalate)-Block-Poly(Caprolactone) Based Nanocomposites Containing Graphene Oxide (GO) and Reduced Graphene Oxide (rGO)

This work reports a study on the influence of graphene oxide (GO) and reduced graphene oxide (rGO) on the functional properties of poly(trimethylene terephthalate)-block-poly(caprolactone) (PTT-block-PCL-T) (75/25 wt.%/wt.%) copolymer, obtained from dimethyl terephthalate (DMT), 1,3-biopropanediol and polycaprolactone diol (PCL) via in situ polymerization. The article presents, if and how the reduction of graphene oxide, in comparison to the non-reduced one, can affect morphological, thermal, electrical and mechanical properties. SEM examination confirms/reveals the homogeneous distribution of GO/rGO nanoplatelets in the PTT-block-PCL-T copolymer matrix. More than threefold increase in the value of the tensile modulus is achieved by the addition of 1.0 wt.% of GO and rGO. Moreover, the thermal conductivity and thermal stability of the GO and rGO-based nanocomposites are also improved. The differential scanning calorimetry (DSC) measurement indicates that the incorporation of GO and rGO has a remarkable impact on the crystallinity of the nanocomposites (an increase of crystallization temperature up to 58 °C for nanocomposite containing 1.0 wt.% of GO is observed). Therefore, the high performances of the PTT-block-PCL-T-based nanocomposites are mainly attributed to the uniform dispersion of nanoplatelets in the polymer matrix and strong interfacial interactions between components.

Preparation and Characterization of 3D Printed PLA-Based Conductive Composites Using Carbonaceous Fillers by Masterbatch Melting Method

This study was aimed at improving the conductivity of polylactic acid (PLA)-based composites by incorporating carbonaceous fillers. The composites with the addition of graphene nanoplatelets (rGO) or multi-walled carbon nanotubes (MWCNTs) were fabricated by the masterbatch melting method in order to improve the dispersion of the two kinds of nano-fillers. The results showed that, with the addition of 9 wt % rGO, the volume electrical resistivity of the composite reached the minimum electrical resistance of 10³ Ω·m, at which point the conductive network in the composites was completely formed. The interfacial compatibility, apparent viscosity, and the thermal stability of the composite were also good. The rGO functionalized by sodium dodecylbenzene sulfonate (SDBS) was an efficient method to further improve the electrical conductivity of the composite, compared with tannic acid and MWCNTs. The resistivity was reduced by an order in magnitude. Patterns printed onto different baseplates by fused deposition modeling illustrated that the functionalized composite had certain flexibility and it is suitable for printing complex shapes.

Electrical Measurements of Thermally Reduced Graphene Oxide Powders under Pressure

Graphene powders obtained via the reduction of graphene oxide flakes have been widely used in various applications as they can be synthesized in large quantities with outstanding properties. The electrical conductivity of graphene powders is critical for their uses in fabricating high-performance devices or materials. Here, we investigated the bulk electrical conductivity of reduced graphene oxide (rGO) powders depending on the applied pressure and additional thermal annealing. The electrical conductivity of the rGO powders was correlated with the change in the carbon-to-oxygen ratio via additional thermal reduction. Furthermore, the effect of the morphology of the rGO powders was studied through electromechanical measurements. This study provides a reliable method for the electromechanical characterization of rGO powders and a better understanding of the electrical conductivity of graphene-based materials.

Interactions between amphiphilic Janus nanosheets and a nonionic polymer in aqueous and biphasic systems

It is of great significance to understand the interactions between nanoparticles and polymers since they guide the development of tremendous applications, for example, in optoelectronic devices, biomedicine, and enhanced oil extraction. However, few studies have probed into this fundamental science as the emerging amphiphilic Janus nanosheets have a more complicated structure than homogeneous nanoparticles, which makes their interactions more complex. In this work, we try to understand the interactions between amphiphilic Janus nanosheets and a model nonionic polymer, hydroxyethyl cellulose (HEC), under different electrolyte and temperature conditions in both aqueous and biphasic systems by employing molecular dynamics simulations as well as experiments. It is found that the attachment of HEC onto the nanosheet surfaces exhibits ion-concentration-dependent behavior in the aqueous phase, helping to colloidally stabilize the nanosheets even in an environment with an extremely high salt concentration for a long duration. In the oil and water biphasic system, only elevated temperature promotes both Janus nanosheets and HEC to individually remain at the interface.

Aligned carbon nanotube morphogenesis predicts physical properties of their polymer nanocomposites

Carbon nanostructure (CNS) based polymer nanocomposites (PNCs) are of interest due to the superior properties of the CNS themselves, scale effects, and the ability to transfer these properties anisotropically to the bulk material. However, measurements of physical properties of such materials are not in agreement with theoretical predictions. Recently, the ability to characterize the 3D morphology of such PNCs at the nanoscale has been significantly improved, with rich, quantitative data extracted from tomographic transmission electron microscopy (TEM). In this work, we use new, nanoscale quantitative 3D morphological information and stochastic modeling to re-interpret experimental measurements of continuous aligned carbon nanotube (A-CNT) PNC properties as a function of A-CNT packing/volume fraction. The 3D tortuosity calculated from tomographic reconstructions and its evolution with volume fraction is used to develop a novel definition of waviness that incorporates the stochastic nature of CNT growth. The importance of using randomly wavy CNTs to model these materials is validated by agreement between simulated and previously-measured PNC elastic moduli. Secondary morphological descriptors such as CNT-CNT junction density and inter-junction distances are measured for transport property predictions. The scaling of the junction density with CNT volume fraction is observed to be non-linear, and this non-linearity is identified as the primary reason behind the previously unexplained scaling of aligned-CNT PNC longitudinal thermal conductivity. By contrast, the measured electrical conductivity scales linearly with volume fraction as it is relatively insensitive to junction density beyond percolation. This result verifies prior hypotheses that electrical conduction in such fully percolated and continuous CNT systems is dominated by the bulk resistivity of the CNTs themselves. This combination of electron tomographic data and stochastic simulations is a powerful method for establishing a predictive capability for nanocomposite structure-property relations, making it an essential aid in understanding and tailoring the next-generation of advanced composites.

Influence of Surface Treatment on the Interfacial and Mechanical Properties of Short S-Glass Fiber-Reinforced Dental Composites

The influence of interfacial shear strength (IFSS) between processed short S-glass fibers (250 and 350 μm in length, 5 μm in diameter) and the dental resin (a mixture of urethane dimethacrylate and triethylene glycol dimethacrylate monomers) on the mechanical properties has been studied experimentally. The surface profile of short S-glass fibers was modified using a selective atomic level metal etching process and simple silanization process to enhance the interfacial properties. The S-glass fibers were etched in acid solutions to increase the surface roughness and selectively remove Al³⁺ and Mg²⁺ ions, which promoted the mechanical and chemical interfacial bonding reactions. The single glass fiber tensile and microdroplet pull-out tests were performed to investigate the effects of interfacial properties on the flexural strength of the resultant composites. The surface modified S-glass fibers showed an increase of 11-40% in IFSS compared to untreated glass fibers. Composites reinforced with 350 μm length glass fibers (AR-70), which were treated in piranha solution for 4 h, showed the highest improvement in overall mechanical properties, flexural strength (34.2%), modulus (9.7%), and breaking energy (51.9%), compared to the untreated fiber-reinforced composites. The modified Lewis-Nielsen equation was developed using the effective fiber length factor to accurately predict the modulus of the short fiber-reinforced composites and validated with experimental results.