MXene molecular sieving membranes for highly efficient gas separation

A Lamellar MXene (Ti3 C2 Tx )/PSS Composite Membrane for Fast and Selective Lithium-Ion Separation

A two-dimensional (2D) laminar membrane with Li⁺ selective transport channels is obtained by stacking MXene nanosheets with the introduction of poly(sodium 4-styrene sulfonate) (PSS) with active sulfonate sites, which exhibits excellent Li⁺ selectivity from ionic mixture solutions of Na⁺ , K⁺ , and Mg²⁺ . The Li⁺ permeation rate through the MXene@PSS composite membrane is as high as 0.08 mol m^-2  h^-1 , while the Li⁺ /Mg²⁺ , Li⁺ /Na⁺ , and Li⁺ /K⁺ selectivities are 28, 15.5, and 12.7, respectively. Combining the simulation and experimental results, we further confirm that the highly selective rapid transport of partially dehydrated Li⁺ within subnanochannels can be attributed to the precisely controlled interlayer spacing and the relatively weaker ion-terminal (-SO₃ ^- ) interaction. This study deepens the understanding of ion-selective permeation in confined channels and provides a general membrane design concept.

MXene Core-Shell Nanosheets: Facile Synthesis, Optical Properties, and Versatile Photonics Applications

In recent years, the transition metal carbonitrides(MXenes) have been widely applied to photoelectric field, and better performance of these applications was achieved via MXene complex structures. In our work, we proposed a MXene core-shell nanosheet composed of a Ti₂C (MXene) phase and gold nanoparticles, and applied it to mode-locked and single-frequency fiber laser applications. The optoelectronic results suggested that the performances of these two applications were both improved when MXene core-shell nanosheets were applied. As a result, we obtained a mode-locking operation with 670 fs pulses, and the threshold pump power reached to as low as 20 mW. Besides, a single-frequency laser with the narrowest linewidth of ~1 kHz is also demonstrated experimentally. Our research work proved that MXene core-shell nanosheets could be used as saturable absorbers (SAs) to promote versatile photonic applications.

Two-Dimensional MXene Synapse for Brain-Inspired Neuromorphic Computing

MXenes, an emerging class of two-dimensional (2D) transition metal carbides and nitrides, have attracted wide attention because of their fascinating properties required in functional electronics. Here, an atomic-switch-type artificial synapse fabricated on Ti₃ C₂ T_x MXene nanosheets with lots of surface functional groups, which successfully mimics the dynamics of biological synapses, is reported. Through in-depth analysis by X-ray photoelectron spectroscopy, transmission electron microscopy, and energy dispersive X-ray spectroscopy, it is found that the synaptic dynamics originated from the gradual formation and annihilation of the conductive metallic filaments on the MXene surface with distributed functional groups. Subsequently, via training and inference tasks using a convolutional neural network for the Canadian-Institute-For-Advanced-Research-10 dataset, the applicability of the artificial MXene synapse to hardware neural networks is demonstrated.

Aligned Ti3C2Tx MXene for 3D Micropatterning via Additive Manufacturing

Selective deposition and preferential alignment of two-dimensional (2D) nanoparticles on complex and flexible three-dimensional (3D) substrates can tune material properties and enrich structural versatility for broad applications in wearable health monitoring, soft robotics, and human-machine interfaces. However, achieving precise and scalable control of the morphology of layer-structured nanomaterials is challenging, especially constructing hierarchical architectures consistent from nanoscale alignment to microscale patterning to complex macroscale landscapes. This work demonstrated a scalable and straightforward hybrid 3D printing method for orientational alignment and positional patterning of 2D MXene nanoparticles. This process involved (i) surface topology design via microcontinuous liquid interface production (μCLIP) and (ii) directed assembly of MXene flakes via capillarity-driven direct ink writing (DIW). With well-managed surface patterning geometry and printing ink quality control, the surface microchannels constrained MXene suspensions and leveraged microforces to facilitate preferential alignment of MXene sheets via layer-by-layer additive depositions. The printed devices displayed multifunctional properties, i.e., anisotropic conductivity and piezoresistive sensing with a wide sensing range, high sensitivity, fast response time, and mechanical durability. Our fabrication technique shows enormous potential for rapid, digital, scalable, and low-cost manufacturing of hierarchical structures, especially for micropatterning and aligning 2D nanoparticles not easily accessible through conventional processing methods.

Single-Phase Covalent Organic Framework Staggered Stacking Nanosheet Membrane for CO2 -Selective Separation

Two-dimensional covalent organic frameworks (2D COFs) are considered as potential candidates for gas separation membranes, benefiting from permanent porosity, light-weight skeletons, excellent stability and facilely-tailored functionalities. However, their pore sizes are generally larger than the kinetic diameters of common gas molecules. One great challenge is the fabrication of single-phase COF membranes to realize precise gas separations. Herein, three kinds of high-quality β-ketoenamine-type COF nanosheets with different pore sizes were developed and aggregated to ultrathin nanosheet membranes with distinctive staggered stacking patterns. The narrowed pore sizes derived from the micro-structures and selective adsorption capacities synergistically endowed the COF membranes with intriguing CO₂ -philic separation performances, among which TpPa-2 with medium pore size exhibited an optimal CO₂ /H₂ separation factor of 22 and a CO₂ permeance of 328 gas permeation units at 298 K. This membrane performance reached the target with commercial feasibility for syngas separations.

2D-Material-integrated hydrogels as multifunctional protective skins for soft robots

Soft robots provide compliant object-machine interactions, but they exhibit insufficient material stability, which restricts them from working in harsh environments. Herein, we developed a class of soft robotic skins based on two-dimensional materials (2DMs) and gelatin hydrogels, featuring skin-like multifunctionality (stretchability, thermoregulation, threat protection, and strain sensing). The 2DM-integrated hydrogel (2DM/H) skins enabled soft robots to execute designated missions in the presence of high levels of heat and various environmental threats while maintaining mild machine temperatures. Via adopting different 2DMs (graphene oxide (GO), montmorillonite (MMT), and titanium carbide (MXene)), the 2DM/H-protected robots were able to perform soft grasping in organic liquids (GO/H) and open fire (MMT/H), and in the presence of electromagnetic radiation and biocontamination (MXene/H). Through blending MXene nanosheets into gelatin, the MXene-blended hydrogel (M-H) skin became strain sensitive, and a GO/M-H gripper exhibited the high-level integration of skin-mimicking capabilities. Finally, we incorporated 2DM/H skins onto an origami-inspired walker robot and a soft batoid-like robot to execute vision-guided searching in fire and underwater locomotion/navigation in chemical spills.

Breathable Ti3C2Tx MXene/Protein Nanocomposites for Ultrasensitive Medical Pressure Sensor with Degradability in Solvents

Flexible, breathable, and degradable pressure sensors with excellent sensing performance are drawing tremendous attention for various practical applications in wearable artificial skins, healthcare monitoring, and artificial intelligence due to their flexibility, breathability, lightweight, decreased electronic rubbish, and environmentally friendly impact. However, traditional plastic or elastomer substrates with impermeability, uncomfortableness, mechanical mismatches, and nondegradability greatly restricted their practical applications. Therefore, the fabrication of such pressure sensors with high flexibility, facile degradability, and breathability is still a critical challenge and highly desired. Herein, we present a wearable, breathable, degradable, and highly sensitive MXene/protein nanocomposites-based pressure sensor. The fabricated MXene/protein-based pressure sensor is assembled from a breathable conductive MXene coated silk fibroin nanofiber (MXene-SF) membrane and a silk fibroin nanofiber membrane patterned with a MXene ink-printed (MXene ink-SF) interdigitated electrode, which can serve as the sensing layer and the electrode layer, respectively. The assembled pressure sensor exhibits a wide sensing range (up to 39.3 kPa), high sensitivity (298.4 kPa^-1 for 1.4-15.7 kPa; 171.9 kPa^-1 for 15.7-39.3 kPa), fast response/recovery time (7/16 ms), reliable breathability, excellent cycling stability over 10 000 cycles, good biocompatibility, and robust degradability. Furthermore, it shows great sensing performance in monitoring human psychological signals, acting as an artificial skin for the quantitative illustration of pressure distribution, and wireless biomonitoring in real time. Considering the biodegradable and breathable features, the sensor may become promising to find potential applications in smart electronic skins, human motion detection, disease diagnosis, and human-machine interaction.

Multiresponsive 2D Ti3C2Tx MXene via Implanting Molecular Properties

The design and fabrication of active nanomaterials exhibiting multifunctional properties is a must in the so-called global "Fourth Industrial Revolution". In this sense, molecular engineering is a powerful tool to implant original capabilities on a macroscopic scale. Herein, different bioinspired 2D-MXenes have been developed via a versatile and straightforward synthetic approach. As a proof of concept, Ti₃C₂T_x MXene has been exploited as a highly sensitive transducing platform for the covalent assembly of active biomolecular architectures (i.e., amino acids). All pivotal properties originated from the anchored targets were proved to be successfully transferred to the resulting bioinspired 2D-MXenes. Appealing applications have been devised for these 2D-MXene prototypes showing (i) chiroptical activity, (ii) fluorescence capabilities, (iii) supramolecular π-π interactions, and (iv) stimuli-responsive molecular switchability. Overall, this work demonstrates the fabrication of programmable 2D-MXenes, taking advantage of the inherent characteristics of the implanted (bio)molecular components. Thus, the current bottleneck in the field of 2D-MXenes can be overcome after the significant findings reported here.

Sulfonic-Group-Grafted Ti3C2Tx MXene: A Silver Bullet to Settle the Instability of Polyaniline toward High-Performance Zn-Ion Batteries

Polyaniline (PANI) is a promising cathode material for Zn-ion batteries (ZIBs) due to its intrinsic conductivity and redox activity; however, the achievements of PANI in high-performance ZIBs are largely hindered by its instability during the repeated charge/discharge. Taking advantage of the high conductivity, flexibility, and grafting ability together, a surface-engineered Ti₃C₂T_x MXene is designed as a silver bullet to fight against the deprotonation and swelling/shrinking issues occurring in the redox process of PANI, which are the origins of its instability. Specifically, the sulfonic-group-grafted Ti₃C₂T_x(S-Ti₃C₂T_x) continuously provides protons to improve the protonation degree of PANI and maintains the polymer backbone at a locally low pH, which effectively inhibits deprotonation and brings high redox activity along with good reversibility. Meanwhile, the conductive and flexible natures of S-Ti₃C₂T_x assist the fast redox reaction of PANI and concurrently buffer its corresponding swelling/shrinking. Therefore, the S-Ti₃C₂T_x-enhanced PANI cathode simultaneously achieves a high discharge capacity of 262 mAh g^-1 at 0.5 A g^-1, a superior rate capability of 160 mAh g^-1 at 15 A g^-1, and a good cyclability over 5000 cycles with 100% coulombic efficiency. This work enlightens the development of versatile MXene via surface engineering for advanced batteries.

High-efficiency CO2 separation using hybrid LDH-polymer membranes

Membrane-based gas separation exhibits many advantages over other conventional techniques; however, the construction of membranes with simultaneous high selectivity and permeability remains a major challenge. Herein, (LDH/FAS)_n-PDMS hybrid membranes, containing two-dimensional sub-nanometre channels were fabricated via self-assembly of unilamellar layered double hydroxide (LDH) nanosheets and formamidine sulfinic acid (FAS), followed by spray-coating with a poly(dimethylsiloxane) (PDMS) layer. A CO₂ transmission rate for (LDH/FAS)₂₅-PDMS of 7748 GPU together with CO₂ selectivity factors (SF) for SF(CO₂/H₂), SF(CO₂/N₂) and SF(CO₂/CH₄) mixtures as high as 43, 86 and 62 respectively are observed. The CO₂ permselectivity outperforms most reported systems and is higher than the Robeson or Freeman upper bound limits. These (LDH/FAS)_n-PDMS membranes are both thermally and mechanically robust maintaining their highly selective CO₂ separation performance during long-term operational testing. We believe this highly-efficient CO₂ separation performance is based on the synergy of enhanced solubility, diffusivity and chemical affinity for CO₂ in the sub-nanometre channels.

Lysozyme Adsorption on Different Functionalized MXenes: A Multiscale Simulation Study

Recently, MXenes, due to their abundant advantages, have been widely applied in energy storage, separation, catalysis, biosensing, et al. In this study, parallel tempering Monte Carlo and molecular dynamics methods were performed to investigate lysozyme adsorption on different functionalized Ti₃C₂T_x (-O, -OH, and -F). The simulation results show that lysozyme can adsorb effectively on Ti₃C₂T_x surfaces, and the order of interaction strength is Ti₃C₂O₂ > Ti₃C₂F₂ > Ti₃C₂(OH)₂. Electrostatics together with van der Waals interactions control protein adsorption. The orientation distributions of lysozyme adsorbed on the Ti₃C₂O₂ and Ti₃C₂F₂ surfaces are more concentrated than that on the Ti₃C₂(OH)₂ surface. During adsorption, the conformation of lysozyme remains stable, suggesting the good biocompatibility of Ti₃C₂T_x. Besides, the distribution of the interfacial water layer on the Ti₃C₂T_x surface has a certain impact on protein adsorption. This study provides theoretical insights for understanding the biocompatibility of 2D Ti₃C₂T_x materials and may help us evaluate the engineering of their surfaces for future biorelated applications.

Ratiometric Antifouling Electrochemical Biosensors Based on Multifunctional Peptides and MXene Loaded with Au Nanoparticles and Methylene Blue

A universal strategy for the construction of ratiometric antifouling electrochemical biosensors was developed based on multifunctional peptides and 2D nanomaterial MXene loaded with gold nanoparticles (AuNPs) and methylene blue (MB). The nanocomposite of MXene loaded with AuNPs and MB (MXene-Au-MB) exhibited excellent conductivity, where the AuNPs were able to capture biomolecules containing sulfhydryl terminus, and the MB molecules were used to generate electrochemical signal. The MXene-Au-MB was fixed on the electrode surface by Nafion, and the anchored peptide captured the electrochemical signal probe carboxyl-modified ferrocene (Fc) to construct an electrochemical biosensor. The multifunctional peptide containing the anchoring, antifouling, and recognizing sequences endowed the sensing surface not only the assaying function but also the capability to resist nonspecific adsorption from complex samples. In the biosensing system, with the increase in the target concentration, the electrochemical signal of MB remained constant, whereas the electrochemical signal of Fc gradually decreased, and the ratiometric detection strategy greatly improved the accuracy of the biosensor. In the presence of a model target prostate-specific antigen (PSA), the recognizing sequence was recognized and cleaved, and the ratiometric signal of Fc and MB indicated the concentration of PSA accurately and sensitively, with a detection range from 5 pg/mL to 10 ng/mL and a limit of detection of 0.83 pg/mL. Electrochemical biosensors based on the MXene-Au-MB and multifunctional peptides possessed high selectivity, accuracy, and sensitivity even in real complex biological samples because of the excellent antifouling ability of the peptide. More importantly, the assaying of other targets can be easily realized with a similar biosensing strategy by changing the recognition sequence of the multifunctional peptide, and the detection of thrombin (TB) has also been achieved in this work.

2D vanadium carbide MXenzyme to alleviate ROS-mediated inflammatory and neurodegenerative diseases

Reactive oxygen species (ROS) are generated and consumed in living organism for normal metabolism. Paradoxically, the overproduction and/or mismanagement of ROS have been involved in pathogenesis and progression of various human diseases. Here, we reported a two-dimensional (2D) vanadium carbide (V₂C) MXene nanoenzyme (MXenzyme) that can mimic up to six naturally-occurring enzymes, including superoxide dismutase (SOD), catalase (CAT), peroxidase (POD), glutathione peroxidase (GPx), thiol peroxidase (TPx) and haloperoxidase (HPO). Based on these enzyme-mimicking properties, the constructed 2D V₂C MXenzyme not only possesses high biocompatibility but also exhibits robust in vitro cytoprotection against oxidative stress. Importantly, 2D V₂C MXenzyme rebuilds the redox homeostasis without perturbing the endogenous antioxidant status and relieves ROS-induced damage with benign in vivo therapeutic effects, as demonstrated in both inflammation and neurodegeneration animal models. These findings open an avenue to enable the use of MXenzyme as a remedial nanoplatform to treat ROS-mediated inflammatory and neurodegenerative diseases.

2D MXenes: Tunable Mechanical and Tribological Properties

2D transition metal carbides, nitrides, and carbonitrides, known as MXenes, were discovered in 2011 and have grown to prominence in energy storage, catalysis, electromagnetic interference shielding, wireless communications, electronic, sensors, and environmental and biomedical applications. In addition to their high electrical conductivity and electrochemically active behavior, MXenes' mechanical properties, flexibility, and strong adhesion properties play crucial roles in almost all of these growing applications. Although these properties prove to be critical in MXenes' impressive performance, the mechanical and tribological understanding of MXenes, as well as their relation to the synthesis process, is yet to be fully explored. Here, a fundamental overview of MXenes' mechanical and tribological properties is provided and the effects of MXenes' compositions, synthesis, and processing steps on these properties are discussed. Additionally, a critical perspective of the compositional control of MXenes for innovative structural, low-friction, and low-wear performance in current and upcoming applications of MXenes is provided. It is established here that the fundamental understanding of MXenes' mechanical and tribological behavior is essential for their quickly growing applications.

High Concentration of Ti3C2Tx MXene in Organic Solvent

MXenes are currently one of the most widely studied two-dimensional materials due to their properties. However, obtaining highly dispersed MXene materials in organic solvent remains a significant challenge for current research. Here, we have developed a method called the tuned microenvironment method (TMM) to prepare a highly concentrated Ti₃C₂T_x organic solvent dispersion by tuning the microenvironment of Ti₃C₂T_x. The as-proposed TMM is a simple and efficient approach, as Ti₃C₂T_x can be dispersed in N,N-dimethylformamide and other solvents by stirring and shaking for a short time, without the need for a sonication step. The delaminated single-layer MXene yield can reach 90% or greater, and a large-scale synthesis has also been demonstrated with TMM by delaminating 30 g of multilayer Ti₃C₂T_x raw powder in a one-pot synthesis. The synthesized Ti₃C₂T_x nanosheets dispersed in an organic solvent possess a clean surface, uniform thickness, and large size. The Ti₃C₂T_x dispersed in an organic solvent exhibits excellent oxidation resistance even under aerobic conditions at room temperature. Through the experimental investigation, the successful preparation of a highly concentrated Ti₃C₂T_x organic solvent dispersion via TMM can be attributed to the following factors: (1) the intercalation of the cation can lead to the change in the hydrophobicity and surface functionalization of the material; (2) proper solvent properties are required in order to disperse MXene nanosheets well. To demonstrate the applicability of the highly concentrated Ti₃C₂T_x organic solvent dispersion, a composite fiber with excellent electrical conductivity is prepared via the wet-spinning of a Ti₃C₂T_x (dispersed in DMF) and polyacrylonitrile mixture. Finally, various types of MXenes, such as Nb₂CT_x, Nb₄C₃T_x, and Mo₂Ti₂C₃T_x, can also be prepared as highly concentrated MXene organic solvent dispersions via TMM, which proves the universality of this method. Thus, it is expected that this work demonstrates promising potential in the research of the MXene material family.

Interface Engineering via Ti3C2Tx MXene Electrolyte Additive toward Dendrite-Free Zinc Deposition

Zinc metal batteries have been considered as a promising candidate for next-generation batteries due to their high safety and low cost. However, their practical applications are severely hampered by the poor cyclability that caused by the undesired dendrite growth of metallic Zn. Herein, Ti₃C₂T_x MXene was first used as electrolyte additive to facilitate the uniform Zn deposition by controlling the nucleation and growth process of Zn. Such MXene additives can not only be absorbed on Zn foil to induce uniform initial Zn deposition via providing abundant zincophilic-O groups and subsequently participate in the formation of robust solid-electrolyte interface film, but also accelerate ion transportation by reducing the Zn²⁺ concentration gradient at the electrode/electrolyte interface. Consequently, MXene-containing electrolyte realizes dendrite-free Zn plating/striping with high Coulombic efficiency (99.7%) and superior reversibility (stably up to 1180 cycles). When applied in full cell, the Zn-V₂O₅ cell also delivers significantly improved cycling performances. This work provides a facile yet effective method for developing reversible zinc metal batteries.

MXene-encapsulated hollow Fe3O4 nanochains embedded in N-doped carbon nanofibers with dual electronic pathways as flexible anodes for high-performance Li-ion batteries

Fe3O4 is one of the promising anode materials in Li-ion batteries and a potential alternative to graphite due to the high specific capacity, natural abundance, environmental benignity, non-flammability, and better safety. Nevertheless, the sluggish intrinsic reaction kinetics and huge volume variation severely limit the reversible capacity and cycling life. In order to overcome these hurdles and enhance the cycling life of Fe3O4, a one-dimensional (1D) nanochain structure composed of 2D Ti3C2-encapsulated hollow Fe3O4 nanospheres homogeneously embedded in N-doped carbon nanofibers (Fe3O4@MXene/CNFs) is designed and demonstrated as a high-performance anode in Li-ion batteries. The distinctive 1D nanochain structure not only inherits the high electrochemical activity of Fe3O4, but also exhibits excellent electron and ion conductivity. The Ti3C2 layer on the Fe3O4 hollow nanospheres forms the primary electron transport pathway and the N-doped carbon nanofiber network provides the secondary transport pathway. At the same time, Ti3C2 flakes partially accommodate the large volume change of Fe3O4 during Li+ insertion/extraction. Density functional theory (DFT) calculations demonstrate that the Fe3O4@MXene/CNFs electrode can efficiently enhance the adsorption of Li+ to promote Li+ storage. As a result of the electrospinning process, self-restacking of Ti3C2 flakes and aggregation of Fe3O4 nanospheres can be prevented resulting in a larger surface area and more accessible active sites on the flexible anode. The Fe3O4@MXene/CNFs anode has remarkable electrochemical properties at high current densities. For example, a reversible capacity of 806 mA h g-1 can be achieved at 2 A g-1 even after 500 cycles, corresponding to an area specific capacity of 1.612 mA h cm-2 at 4 mA cm-2 and a capacity as high as 613 mA h g-1 is retained at 5 A g-1, corresponding to an area capacity of 1.226 mA h cm-2 at 10 mA cm-2. The results indicate that the Fe3O4@MXene/CNFs anode has excellent properties for Li-ion storage.

Nanoengineering of 2D MXene-Based Materials for Energy Storage Applications

2D MXene-based nanomaterials have attracted tremendous attention because of their unique physical/chemical properties and wide range of applications in energy storage, catalysis, electronics, optoelectronics, and photonics. However, MXenes and their derivatives have many inherent limitations in terms of energy storage applications. In order to further improve their performance for practical application, the nanoengineering of these 2D materials is extensively investigated. In this Review, the latest research and progress on 2D MXene-based nanostructures is introduced and discussed, focusing on their preparation methods, properties, and applications for energy storage such as lithium-ion batteries, sodium-ion batteries, lithium-sulfur batteries, and supercapacitors. Finally, the critical challenges and perspectives required to be addressed for the future development of these 2D MXene-based materials for energy storage applications are presented.

Gas-sieving zeolitic membranes fabricated by condensation of precursor nanosheets

The synthesis of molecular-sieving zeolitic membranes by the assembly of building blocks, avoiding the hydrothermal treatment, is highly desired to improve reproducibility and scalability. Here we report exfoliation of the sodalite precursor RUB-15 into crystalline 0.8-nm-thick nanosheets, that host hydrogen-sieving six-membered rings (6-MRs) of SiO₄ tetrahedra. Thin films, fabricated by the filtration of a suspension of exfoliated nanosheets, possess two transport pathways: 6-MR apertures and intersheet gaps. The latter were found to dominate the gas transport and yielded a molecular cutoff of 3.6 Å with a H₂/N₂ selectivity above 20. The gaps were successfully removed by the condensation of the terminal silanol groups of RUB-15 to yield H₂/CO₂ selectivities up to 100. The high selectivity was exclusively from the transport across 6-MR, which was confirmed by a good agreement between the experimentally determined apparent activation energy of H₂ and that computed by ab initio calculations. The scalable fabrication and the attractive sieving performance at 250-300 °C make these membranes promising for precombustion carbon capture.

Hydrogen storage in incompletely etched multilayer Ti2CTx at room temperature

Hydrogen storage materials are the key to hydrogen energy utilization. However, current materials can hardly meet the storage capacity and/or operability requirements of practical applications. Here we report an advancement in hydrogen storage performance and related mechanism based on a hydrofluoric acid incompletely etched MXene, namely, a multilayered Ti₂CT_x (T is a functional group) stack that shows an unprecedented hydrogen uptake of 8.8 wt% at room temperature and 60 bar H₂. Even under completely ambient conditions (25 °C, 1 bar air), Ti₂CT_x is still able to retain ~4 wt% hydrogen. The hydrogen storage is stable and reversible in the material, and the hydrogen release is controllable by pressure and temperature below 95 °C. The storage mechanism is deduced to be a nanopump-effect-assisted weak chemisorption in the sub-nanoscale interlayer space of the material. Such a storage approach provides a promising strategy for designing practical hydrogen storage materials.

MOF-in-COF molecular sieving membrane for selective hydrogen separation

Covalent organic frameworks (COFs) are promising materials for advanced molecular-separation membranes, but their wide nanometer-sized pores prevent selective gas separation through molecular sieving. Herein, we propose a MOF-in-COF concept for the confined growth of metal-organic framework (MOFs) inside a supported COF layer to prepare MOF-in-COF membranes. These membranes feature a unique MOF-in-COF micro/nanopore network, presumably due to the formation of MOFs as a pearl string-like chain of unit cells in the 1D channel of 2D COFs. The MOF-in-COF membranes exhibit an excellent hydrogen permeance (>3000 GPU) together with a significant enhancement of separation selectivity of hydrogen over other gases. The superior separation performance for H2/CO2 and H2/CH4 surpasses the Robeson upper bounds, benefiting from the synergy combining precise size sieving and fast molecular transport through the MOF-in-COF channels. The synthesis of different combinations of MOFs and COFs in robust MOF-in-COF membranes demonstrates the versatility of our design strategy.

Molecular insights into MXene destructing the cell membrane as a “nano thermal blade”

The decreased transparency denotes the approach of MXene, which indicated that the penetration process is unspontaneous. After excitation with a light beam, heat is transported through an efficient thermal conduction pathway.

Flexible, Transparent, and Conductive Ti3C2Tx MXene-Silver Nanowire Films with Smart Acoustic Sensitivity for High-Performance Electromagnetic Interference Shielding

Although flexible, transparent, and conductive materials are increasingly required for electromagnetic interference (EMI) shielding applications in foldable and wearable electronics, it remains a great challenge to achieve outstanding shielding performances while retaining high light transmittances. Herein, a multiscale structure optimization strategy is proposed to fabricate a transparent and conductive silver nanowire (AgNW) film with both high EMI shielding performance and high light transmittance by a scalable spray-coating technique. By decorating with a Ti₃C₂T_x MXene coating, the connection and integrity of the AgNW network are greatly improved by welding the nanowire junctions. Compared to a neat AgNW film (21 dB) with the same AgNW density, the Ti₃C₂T_x MXene-welded AgNW film shows a much higher EMI shielding performance (34 dB) with better mechanical and environmental stabilities. Furthermore, the layered structure design on the macroscopic scale results in an even higher EMI shielding efficiency of 49.2 dB with a high light transmittance of ∼83%. With the Ti₃C₂T_x MXene coating and the PET substrate as a triboelectric pair, the layered structure offers great flexibility for the transparent film to integrate smart sound monitoring capability. Therefore, the combination of excellent EMI shielding performance, high light transmittance, and sensitive pressure response makes the Ti₃C₂T_x MXene-welded AgNW films promising for many potential applications in next-generation electronics.

Flexible Polypropylene-Supported ZIF-8 Membranes for Highly Efficient Propene/Propane Separation

Metal-organic framework (MOF) membranes have enormous potential in separation applications. There are several MOF membranes grown on polymer substrates aimed for scale-up, but their brittleness hampers any industrial application. Herein, intergrown continuous polypropylene (PP)-supported ZIF-8 membranes have been successfully synthesized via fast current-driven synthesis (FCDS) within 1 h. The PP-supported ZIF-8 membranes exhibit a promising separation factor of 122 ± 13 for binary C₃H₆-C₃H₈ mixtures combined with excellent flexibility behavior. The C₃H₆/C₃H₈ separation performance of the PP-supported ZIF-8 membrane was found to be constant after bending the supported ZIF-8 film with a curvature of 92 m^-1. This outstanding mechanical property is crucial for practical applications. Moreover, we further synthesized ZIF-8 membranes on various polymer substrates and even polymer hollow fibers to demonstrate the production scalability.

Precisely Tunable Ion Sieving with an Al13-Ti3C2Tx Lamellar Membrane by Controlling Interlayer Spacing

Two-dimensional (2D) membranes exhibit exceptional properties in molecular separation and transport, which reveals their potential use in various applications. However, ion sieving with 2D membranes is severely restrained due to intercalation-induced swelling. Here, we describe how to efficiently stabilize the lamellar architecture using Keggin Al₁₃ polycations as pillars in a Ti₃C₂T_x membrane. More importantly, interlayer spacing can be easily adjusted with angstrom precision over a wide range (2.7-11.2 Å) to achieve selective and tunable ion sieving. A membrane with narrow d-spacing demonstrated enhanced selectivity for monovalent ions. When applied in a forward osmosis desalination process, this membrane exhibited high NaCl exclusion (99%) with a fast water flux (0.30 L m^-2 h^-1 bar^-1). A membrane with wide d-spacing showed notable selectivity, which was dependent on the cation valence. When it was applied to acid recovery from iron-based industrial wastewater, the membrane showed good H⁺/Fe²⁺ selectivity, which makes it a promising substitute for traditional polymeric membranes. Thus, we introduce a possible route to construct 2D membranes with appropriate structures to satisfy different ion-sieving requirements in diverse environment-, resource-, and energy-related applications.

Graphene-based Membranes for H2 Separation: Recent Progress and Future Perspective

Hydrogen (H2) is an industrial gas that has showcased its importance in several well-known processes such as ammonia, methanol and steel productions, as well as in petrochemical industries. Besides, there is a growing interest in H2 production and purification owing to the global efforts to minimize the emission of greenhouse gases. Nevertheless, H2 which is produced synthetically is expected to contain other impurities and unreacted substituents (e.g., carbon dioxide, CO2; nitrogen, N2 and methane, CH4), such that subsequent purification steps are typically required for practical applications. In this context, membrane-based separation has attracted a vast amount of interest due to its desirable advantages over conventional separation processes, such as the ease of operation, low energy consumption and small plant footprint. Efforts have also been made for the development of high-performance membranes that can overcome the limitations of conventional polymer membranes. In particular, the studies on graphene-based membranes have been actively conducted most recently, showcasing outstanding H2-separation performances. This review focuses on the recent progress and potential challenges in graphene-based membranes for H2 purification.

Controlling the Structure of MoS2 Membranes via Covalent Functionalization with Molecular Spacers

Restacked two-dimensional (2D) materials represent a new class of membranes for water-ion separations. Understanding the interplay between the 2D membrane's structure and the constituent material's surface chemistry to its ion sieving properties is crucial for further membrane development. Here, we reveal, and tune via covalent functionalization, the structure of MoS₂-based membranes. We find features on both the ∼1 nm (interlayer spacing) and ∼100 nm (mesoporous voids between layers) length scales that evolve with the hydration level. The functional groups act as permanent molecular spacers, preventing local impermeability caused by irreversible restacking and promoting the uniform rehydration of the membrane. Molecular dynamics simulations show that the choice of functional group tunes the structure of water within the MoS₂ channel and consequently determines the hydrated interlayer spacing. We demonstrate that MoS₂ membranes functionalized with acetic acid have consistently ∼92% rejection of Na₂SO₄ with a flux of ∼1.5 lm^-2 hr^-1 bar^-1.