Mitochondrial-targeted deep-red fluorescent probe for ATP and its application in living cells and zebrafish

A novel mitochondrial-targeted deep-red fluorescence ATP probe, NIR-A, is reported. The probe showed a fast, selective, and reversible response for ATP with a significant turn-on fluorescence signal at 663 nm with a large Stokes shift of 81 nm. Additionally, the introduction of TPP enabled TPP-endowed NIR-A to be enriched predominantly in the mitochondria. NIR-A was successfully applied to monitor ATP fluctuation in Ramos cells and zebrafish in real-time with good biocompatibility.

Triarylmethanes and their Medium-Ring Analogues by Unactivated Truce-Smiles Rearrangement of Benzanilides

Intramolecular nucleophilic aromatic substitution (Truce–Smiles rearrangement) of the anions of 2‐benzyl benzanilides leads to triarylmethanes in an operationally simple manner. The reaction succeeds even without electronic activation of the ring that plays the role of electrophile in the S_NAr reaction, being accelerated instead by the preferred conformation imposed by the tertiary amide tether. The amide substituent of the product may be removed or transformed into alternative functional groups. A ring‐expanding variant (n to n+4) of the reaction provided a route to doubly benzo‐fused medium ring lactams of 10 or 11 members. Hammett analysis returned a ρ value consistent with the operation of a partially concerted reaction mechanism.

A Xanthene Dye-based Sensor for Viscosity and Cell Imaging

A new xanthene dye, namely ImX, has been facilely prepared by reaction of 4-(1H-Imidazol-1-yl)benzaldehyde with N, N-diethyl-3-aminophenol in concentrated propionic acid, and then treated by p-chloranil. ImX presents the maximum absorption and emission band centered at 562 nm and 583 nm in water, respectively. Fluorescent spectra investigations demonstrate that ImX shows viscosity-selective fluorescent response and emission enhancement when the solvent viscosity increases from 1.1 cp. (water) to 1248 cp. (98 % glycerol). In addition, this viscosity-selective fluorescence response covers a wide pH range from 2.5 to 10.0. More significantly, ImX demonstrates low cytotoxicity and can be employed as tracer for the detection of Monensin-triggered viscosity enhancement by cell imaging.

ZIGIR, a Granule-Specific Zn2+ Indicator, Reveals Human Islet α Cell Heterogeneity

Numerous mammalian cells contain abundant Zn²⁺ in their secretory granules, yet available Zn²⁺ sensors lack the desired specificity and sensitivity for imaging granular Zn²⁺. We developed a fluorescent zinc granule indicator, ZIGIR, that possesses numerous desired properties for live cell imaging, including >100-fold fluorescence enhancement, membrane permeability, and selective enrichment to acidic granules. The combined advantages endow ZIGIR with superior sensitivity and specificity for imaging granular Zn²⁺. ZIGIR enables separation of heterogenous β cells based on their insulin content and sorting of mouse islets into pure α cells and β cells. In human islets, ZIGIR facilitates sorting of endocrine cells into highly enriched α cells and β cells, reveals unexpectedly high Zn²⁺ activity in the somatostatin granule of some δ cells, and uncovers variation in the glucagon content among human α cells. We expect broad applications of ZIGIR for studying Zn²⁺ biology and Zn²⁺-rich secretory granules and for engineering β cells with high insulin content for treating diabetes.

Investigating Single-Molecule Fluorescence Spectral Heterogeneity of Rhodamines Using High-Throughput Single-Molecule Spectroscopy

We experimentally investigated several intramolecular coordinate and environmental changes as potential causes of single-molecule fluorescence spectral heterogeneities (smFSH). We developed a high-throughput single-molecule spectroscopy method to analyze more than 5000 single-molecule emission spectra from each of 9 commonly used fluorophores with different structural rigidities and deposited on substrates with different polarities. We observed an unexpectedly high smFSH from structurally rigid Rhodamine B compared with a structurally flexible Cyanine dye-Alexa Fluor 647. Based on experimentally measured smFSH, we ruled out the system's noise uncertainty, single-molecule spectral diffusion, and environmental polarity as the primary causes of the high smFSH. We found that the rotational flexibility of N,N-dialkylated groups contributed to the smFSH. With the high smFSH observed in structurally more rigid model fluorophores, we speculated that other intramolecular coordinate and environmental changes might also contribute to the high smFSH in Rhodamines.

White light employing luminescent engineered large (mega) Stokes shift molecules: a review

Large (mega) Stokes shift molecules have shown great potential in white light emission for optoelectronic applications, such as flat panel display technology, light-emitting diodes, photosensitizers, molecular probes, cellular and bioimaging, and other applications. This review aims to summarize recent developments of white light generation that incorporate a large Stokes shift component, key approaches to designing large Stokes shift molecules, perspectives on future opportunities, and remaining challenges confronting this emerging research field. After a brief introduction of feasible pathways in generating white light, exemplifications of large Stokes shift molecules as white light candidates from organic and inorganic-based materials are illustrated. Various possible ways to design such molecules have been revealed by integrating the photophysical mechanisms that are essential to produce red-shifted emission upon photoexcitation, such as excited state intramolecular proton transfer (ESIPT), intramolecular charge transfer (ICT), excited state geometrical relaxation or structural deformation, aggregation-induced emission (AIE) alongside the different formations of aggregates, interplay between monomer and excimer emission, host-guest interaction, and lastly metal to ligand charge transfer (MLCT) via harvesting triplet state. Furthermore, previously reported fluorescent materials are described and categorized based on luminescence behaviors on account of the Stokes shifts value. This review will serve as a rationalized introduction and reference for researchers who are interested in exploring large or mega Stokes shift molecules, and will motivate new strategies along with instigation of persistent efforts in this prominent subject area with great avenues.

Phosphonofluoresceins: Synthesis, Spectroscopy, and Applications

Xanthene fluorophores, like fluorescein, have been versatile molecules across diverse fields of chemistry and life sciences. Despite the ubiquity of 3-carboxy and 3-sulfonofluorescein for the last 150 years, to date, no reports of 3-phosphonofluorescein exist. Here, we report the synthesis, spectroscopic characterization, and applications of 3-phosphonofluoresceins. The absorption and emission of 3-phosphonofluoresceins remain relatively unaltered from the parent 3-carboxyfluorescein. 3-Phosphonofluoresceins show enhanced water solubility compared to 3-carboxyfluorescein and persist in an open, visible light-absorbing state even at low pH and in low dielectric media while 3-carboxyfluoresceins tend to lactonize. In contrast, the spirocyclization tendency of 3-phosphonofluoresceins can be modulated by esterification of the phosphonic acid. The bis-acetoxymethyl ester of 3-phosphonofluorescein readily enters living cells, showing excellent accumulation (>6x) and retention (>11x), resulting in a nearly 70-fold improvement in cellular brightness compared to 3-carboxyfluorescein. In a complementary fashion, the free acid form of 3-phosphonofluorescein does not cross cellular membranes, making it ideally suited for incorporation into a voltage-sensing scaffold. We develop a new synthetic route to functionalized 3-phosphonofluoresceins to enable the synthesis of phosphono-voltage sensitive fluorophores, or phosVF2.1.Cl. Phosphono-VF2.1.Cl shows excellent membrane localization, cellular brightness, and voltage sensitivity (26% ΔF/F per 100 mV), rivaling that of sulfono-based VF dyes. In summary, we develop the first synthesis of 3-phosphonofluoresceins, characterize the spectroscopic properties of this new class of xanthene dyes, and utilize these insights to show the utility of 3-phosphonofluoresceins in intracellular imaging and membrane potential sensing.

Preparation of immunomagnetic beads coupled with a rhodamine hydrazine immunosensor for the detection of Mycobacterium avium subspecies paratuberculosis in bovine feces, milk, and colostrum

The aim of this study was to develop and evaluate a method for detecting Mycobacterium avium ssp. paratuberculosis (MAP) bacteria in bovine fecal, milk, and colostrum samples using immunomagnetic beads (IMB) and a rhodamine hydrazone immunosensor. Immunomagnetic beads were prepared by using purified antibodies from hyperimmunized sera that were coupled to Fe nanoparticles with diethylene triamine pentaacetic acid (DTPA) or ethyl (dimethyl aminopropyl) carbodiimide (EDC)-N-hydroxy succinimide (NHS) as linkers. Rhodamine hydrazone particles were synthesized and coupled to IgY anti-MAP antibodies using DTPA or EDC-NHS linkers. Separation efficiency of the IMB was tested on bovine fecal, milk, and colostrum samples experimentally contaminated with MAP. The studied methods were evaluated on their ability to detect MAP and separate bacteria in complex mediums. The ELISA results indicated 95% efficacy in antibody coupling to IMB, with the DTPA-IMB method being more efficient than the EDC-NHS-IMB method. By using the DTPA-IMB method, MAP bacteria were successfully recovered from fecal, milk, and colostrum samples. The DTPA-IMB method used in combination with the rhodamine hydrazone immunosensor had a limit of detection equal to 30 and 30,000 MAP cells/mL using chromogenic and fluorescent properties, respectively. Combining the DTPA-IMB separation method with the rhodamine hydrazone immunosensor provides a fast, sensitive, and cost-beneficial method for detecting MAP in bovine feces, milk, and colostrum.

An intramolecular photoswitch can significantly promote photoactivation of Pt(iv) prodrugs

Selective activation of prodrugs at diseased tissue through bioorthogonal catalysis represents an attractive strategy for precision cancer treatment. Achieving efficient prodrug photoactivation in cancer cells, however, remains challenging. Herein, we report two Pt(iv) complexes, designated as rhodaplatins {rhodaplatin 1, [Pt(CBDCA-O,O)(NH3)2(RhB)OH]; rhodaplatin 2, [Pt(DACH)ox(RhB)(OH)], where CBDCA is cyclobutane-1,1-dicarboxylate, RhB is rhodamine B, DACH is (1R,2R)-1,2-diaminocyclohexane, and ox is oxalate}, that bear an internal photoswitch to realize efficient accumulation, significant co-localization, and subsequent effective photoactivation in cancer cells. Compared with the conventional platform of external photocatalyst plus substrate, rhodaplatins presented up to 4.8 104-fold increased photoconversion efficiency in converting inert Pt(iv) prodrugs to active Pt(ii) species under physiological conditions, due to the increased proximity and covalent bond between the photoswitch and Pt(iv) substrate. As a result, rhodaplatins displayed increased photocytotoxicity compared with a mixture of RhB and conventional Pt(iv) compound in cancer cells including Pt-resistant ones. Intriguingly, rhodaplatin 2 efficiently accumulated in the mitochondria and induced apoptosis without causing genomic DNA damage to overcome drug resistance. This work presents a new approach to develop highly effective prodrugs containing intramolecular photoswitches for potential medical applications.

Using a High Quantum Yield Fluorescent Probe with Two-Photon Excitation to Detect Cisplatin in Biological Systems

A direct detection protocol for the anticancer drug of cisplatin is highly desirable for studying its actions and side effects. In this work, a high quantum yield fluorescent probe with two-photon excitation to detect cisplatin was designed. The probe (RD640-TC) was based on the rhodamine 640 (Rh640) fluorophore, responding to cisplatin with red fluorescence. It showed an excellent linear correlation between the fluorescence response and the concentration of cisplatin over the range of 2-50 μM, suggesting a feasible tool for convenient detection of cisplatin. RD640-TC had high fluorescence quantum yield (Φ = 0.68) and two-photon absorption properties, which made it more favorable to probe cisplatin in biological systems. We exemplified RD640-TC for the detection of cisplatin in cells and zebrafish, providing an accessible tool for in vivo tracking of cisplatin, which has great potential value for studying how cisplatin is processed at cellular level and further for facilitating the investigation into the origin of cisplatin's toxicity.

Stable lead-halide perovskite quantum dots as efficient visible light photocatalysts for organic transformations

Lead halide perovskite (LHP) based colloidal quantum dots (CQDs) have tremendous potential for photocatalysis due to their exceptional optical properties. However, their applicability in catalysis is restricted due to poor chemical stability and low recyclability. We report halide-passivated, monodisperse CsPbBr3CQDs as a stable and efficient visible-light photocatalyst for organic transformations. We demonstrate oxidative aromatization of a wide range of heterocyclic substrates including examples which are poor hydrogen transfer (HAT) reagents. Two to five-fold higher rate kinetics were observed for reactions catalyzed by CsPbBr3CQDs in comparison with bulk-type CsPbBr3 (PNCs) or conventionally synthesized CsPbBr3CQDs and other metal organic dyes (rhodamine 6G and [Ru(bpy)3]2+). Furthermore, these CQDs exhibit improved air-tolerance and photostability and in turn show a higher turnover number (TON) of 200, compared to conventionally prepared CQDs (TON = 166) and state-of-the-art bulk-type perovskite-based catalyst (TON = 177). Our study paves the way for the practical applicability of energy-level tunable, size-controlled LHP CQDs as efficient photocatalysts in organic synthesis.

Sulfonate substituted rhodamine hydrophilic fluorescent probes: Application to specific detection of Fe3+ and imaging in living fish

Two Sulfonate substituted rhodamine hydrophilic fluorescent probes RbS1 and RbS2 were designed and synthesized for specific detection of Fe³⁺. It was found that the probe RbS2 was stronger than RbS1 in the water solubility test. Both of them displayed responses to Fe³⁺ with a apparent fluorescence enhancement at 585 nm, accompanied with a distinct fluorescence change to pink. Upon addition of Fe³⁺ ions (0-16 μM), the emission intensity of RbS1 and RbS2 increased to 40 and 70 fold, which exhibited a good linear relationship with the concentration of Fe³⁺. The detection limits of RbS1 and RbS2 for sensing Fe³⁺ were 0.64 μM and 0.56 μM, respectively. The binding ratios of the RbS1 and RbS2 to Fe³⁺ were 1:1 and the recycling ability for Fe³⁺ was reasonable. RbS1 and RbS2 have been successfully applied to the determination of Fe³⁺ in real water samples with satisfactory recovery and accuracy. In further living fish imaging test, the probe RbS2 was distributed into abdomen, which exhibited better fluorescence imaging ability than that of RbS1.

A novel near-infrared optical and redox-active receptor for the multi-model detection of Hg2+ in water and living cells

A key issue for constructing optical and redox-active receptors is how to conjugate a specific sensing kernel with a multi-signal-responsive system to carry out multi-feature analysis. Mercury is considered to be highly toxic to human health and ecological security. In this work, we present a novel near-infrared optical and redox-active receptor that can sense Hg²⁺ at ppb level in aqueous media via multi-model monitors with a low detection limit of 8.4 × 10^-9 M (1.68 ppb). This receptor features a visible detection, 'off-on' fluorescence response, and efficient electrochemistry assessment, as well as pH-insensitivity to Hg²⁺ with high sensitivity. In view of its marked near-infrared emission and fluorescence enhancement, we successfully applied this receptor to visualize Hg²⁺ in live cells. Furthermore, a possible sensing model was established and rationalized with theoretical studies.

Synthesis and Applications of Selected Fluorine-Containing Fluorophores

The synthesis of fluorine-containing small molecules has had numerous benefits of improving the quality and efficiency of many applications of these compounds. For example, fluorine adds promising functionalities in various areas of imaging (MRI, PET, and NIR); gives cell-targeting properties; and has demonstrated improvements in cell permeability, solubility, and other pharmacologic properties. For these and other numerous reasons, fluorination of molecules has grown in popularity in various fields of chemistry. Many reports show the effects observed from increasing the number of fluorine atoms on a fluorophore scaffold. This report will cover the most significant applications and improvements that fluorine has contributed to in various dye scaffolds such as BODIPY, rhodamine, phthalocyanine, and cyanine in the recent decade.

Universal lasing condition

Usually, the cavity is considered an intrinsic part of laser design to enable coherent emission. For different types of cavities, it is assumed that the light coherence is achieved by different ways. We show that regardless of the type of cavity, the lasing condition is universal and is determined by the ratio of the width of the atomic spectrum to the product of the number of atoms and the spontaneous radiation rate in the laser structure. We demonstrate that cavity does not play a crucial role in lasing since it merely decreases the threshold by increasing the photon emission rate thanks to the Purcell effect. A threshold reduction can be achieved in a cavity-free structure by tuning the local density of states of the electromagnetic field. This paves the way for the design of laser devices based on cavity-free systems.

"Turn-on" fluorescent probes based on Rhodamine B/amino acid derivatives for detection of Fe3+ in water

Five kinds of Fe³⁺ fluorescent probes (RhB-Gly, RhB-Ala, RhB-Try, RhB-Cys, and RhB-His) were synthesized and characterized by NMR and mass spectrometry, based on the "OFF-ON" mechanism of Rhodamine B derivatives. The RhB-His based probe showed remarkable sensing performance toward the detection for Fe³⁺ and showed high selectivity for Fe³⁺ in the presence of other metal ions (such as Fe²⁺, Hg²⁺, Zn²⁺, Ba²⁺, Al³⁺, Co²⁺, Cd²⁺, K⁺, Na⁺, Mn²⁺, Pd²⁺, Pb²⁺, Ca²⁺, Ni²⁺, Cu²⁺, and Ag⁺), in PBS buffer solution (containing 2% of EtOH, pH 7.4, 1.0 mmol/L). The enhancement of the fluorescence was linearly proportional with the concentration Fe³⁺ (from 0 to 20 μmol/L), while the detection limit reached 0.88 μmol/L with a response time of 15 s. The RhB-His probe was successfully applied to investigate real samples and living cell imaging.

Fluorescent Probes for Selective Recognition of Hypobromous Acid: Achievements and Future Perspectives

Reactive oxygen species (ROS) have been implicated in numerous pathological processes and their homeostasis facilitates the dynamic balance of intracellular redox states. Among ROS, hypobromous acid (HOBr) has a high similarity to hypochlorous acid (HOCl) in both chemical and physical properties, whereas it has received relatively little attention. Meanwhile, selective recognition of endogenous HOBr suffers great challenges due to the fact that the concentration of this molecule is much lower than that of HOCl. Fluorescence-based detection systems have emerged as very important tools to monitor biomolecules in living cells and organisms owing to distinct advantages, particularly the temporal and spatial sampling for in vivo imaging applications. To date, the development of HOBr-specific fluorescent probes is still proceeding quite slowly, and the research related to this area has not been systematically summarized. In this review, we are the first to review the progress made so far in fluorescent probes for selective recognition and detection of HOBr. The molecular structures, sensing mechanisms, and their successful applications of these probes as bioimaging agents are discussed here in detail. Importantly, we hope this review will call for more attention to this rising field, and that this could stimulate new future achievements.

Design and Application of Receptor-Targeted Fluorescent Probes Based on Small Molecular Fluorescent Dyes

In recent years, a variety of receptor-targeted fluorescent probes have been developed and widely used to realize the visualization of certain receptors, which facilitates the early diagnosis and treatment of diseases. In this Review, we focus on the recent achievements in design, chemical structure, imaging characterization, and potential applications of receptor-targeted fluorescent probes from the past 10 years. The development and application of receptor-targeted fluorescent probes will expand our knowledge of the distribution and function of disease-related receptors, shed light on the drug discovery for clinical diseases where receptors are implicated, and feed into the diagnosis and treatment of a plethora of diseases, including tumors.

Asymmetric bismuth-rhodamines as an activatable fluorogenic photosensitizer

Bismuth-rhodamine compounds stand out for their unique excitable photosensitizing properties and concomitant fluorescence; however, further knowledge of the structure-property relationship is required to expand the scope of their practical application. With this aim, this study describes the first examples of asymmetric bismuth-incorporated rhodamines, BiRNH and BiRAc, including their synthesis, photophysical properties, and photosensitizing abilities. Upon red light excitation, BiRNH exhibits detectable emission and photosensitizing properties, while the N-acetylated derivative BiRAc shows a hypsochromic shift in the absorption wavelength and attenuation of emission and photosensitizing ability. These significantly different photophysical properties enabled us to design an activatable fluorogenic photosensitizer, BiRGlu, which bears a γ-glutamyl group instead of the acetyl group in BiRAc. The γ-glutamyl group can be cleaved by γ-glutamyl transpeptidase (GGT) to produce BiRNH, which acts as a red-light-excitable fluorophore and photosensitizer. A cell study revealed that the phototoxicity and fluorescence of BiRGlu could be simultaneously and selectively activated in the cells with high GGT activity. Thus, we established that BiRNH could be envisaged as a versatile scaffold for activatable fluorogenic photosensitizers.

A dual-channel fluorescent probe for monitoring pH changes in lysosomes during autophagy

A new fluorescent probe RD for visualizing starvation-induced autophagy in living cells and for distinguishing between neutral and acidic lysosomes in the process of autophagy.

Near-infrared dyes for two-photon absorption in the short-wavelength infrared: strategies towards optical power limiting

The recent advances in the field of two-photon absorbing chromophores in the short-wavelength infrared spectral range (SWIR 1100–2500 nm) are summarized, highlighting the development of optical power limiting devices in this spectral range.

Four xanthene–fluorene based probes for the detection of Hg2+ ions and their application in strip tests and biological cells

Four new fluorescent probes based on the xanthene structure to detect mercury ions with different colors of fluorescence have been reported.

Fundamental studies to emerging applications of pyrrole-BF2 (BOPHY) fluorophores

This review highlights the up-and-coming pyrrole-BF₂ (BOPHY) fluorophores, with a focus on synthetic procedures, photophysical properties – including structure–property analyses – as well as emerging applications.

Catalytic synergy of Au@CeO2–rGO nanohybrids for the reductive transformation of antibiotics and dyes

Changes in morphology of Au@CeO₂–rGO nanohybrids demonstrated synergistic effects of the ternary components for reductive transformation of antibiotics and dyes.

Fluorine-18-Labeled Fluorescent Dyes for Dual-Mode Molecular Imaging

Recent progress realized in the development of optical imaging (OPI) probes and devices has made this technique more and more affordable for imaging studies and fluorescence-guided surgery procedures. However, this imaging modality still suffers from a low depth of penetration, thus limiting its use to shallow tissues or endoscopy-based procedures. In contrast, positron emission tomography (PET) presents a high depth of penetration and the resulting signal is less attenuated, allowing for imaging in-depth tissues. Thus, association of these imaging techniques has the potential to push back the limits of each single modality. Recently, several research groups have been involved in the development of radiolabeled fluorophores with the aim of affording dual-mode PET/OPI probes used in preclinical imaging studies of diverse pathological conditions such as cancer, Alzheimer's disease, or cardiovascular diseases. Among all the available PET-active radionuclides, 18F stands out as the most widely used for clinical imaging thanks to its advantageous characteristics (t1/2 = 109.77 min; 97% β+ emitter). This review focuses on the recent efforts in the synthesis and radiofluorination of fluorescent scaffolds such as 4,4-difluoro-4-bora-diazaindacenes (BODIPYs), cyanines, and xanthene derivatives and their use in preclinical imaging studies using both PET and OPI technologies.

The development of a biotin-guided and mitochondria-targeting fluorescent probe for detecting SO2 precisely in cancer cells

Mitochondrial sulfur dioxide (SO₂) is very closely associated with various activities of cancer cell. However, the specific physiological and pathological roles of mitochondrial SO₂ in cancer cells are still not well defined. Lacking a powerful molecular tool for detecting mitochondrial SO₂ in cancer cells precisely is an essential factor. So it is urgent to develop a specific method for monitoring mitochondrial SO₂ in cancer cells. Herein, we described a distinct cancer cell-specific fluorescent probe NS for detecting mitochondrial SO₂ accurately in cancer cells. Biotin, possessing of high affinity for cancer cells, was decorated into probe to provide its cancer cell-targeting property. Moreover, the positive charge hemicyanine group was used to anchor mitochondria selectively. A series of spectral results from concentration titration, dynamics and selectivity experiments showed that NS had high sensitivity, fast response and high selectivity to SO₂. These properties render NS ability for detecting SO₂ in living cells. In biological imaging, the achievements in detecting exogenous and endogenous SO₂ displayed the probe had favorable response to SO₂ in living cells with well biocompatibility. Significantly, assisted by competitive experiments with excess biotin, NS demonstrated distinct cancer cell-targeting for detecting mitochondrial SO₂. Furthermore, NS could locate mitochondria specially and detect mitochondrial SO₂ in cancer cells by co-localization. Moreover, NS can trace SO₂ in zebrafish with long wavelength emission. Therefore, NS can achieve in tracing mitochondrial SO₂ selectively in cancer cells. It would be a powerful tool for well defining the physiological and pathological roles of mitochondrial SO₂ in cancer cells.

Recent Progress in Small Spirocyclic, Xanthene-Based Fluorescent Probes

The use of fluorescent probes in a multitude of applications is still an expanding field. This review covers the recent progress made in small molecular, spirocyclic xanthene-based probes containing different heteroatoms (e.g., oxygen, silicon, carbon) in position 10'. After a short introduction, we will focus on applications like the interaction of probes with enzymes and targeted labeling of organelles and proteins, detection of small molecules, as well as their use in therapeutics or diagnostics and super-resolution microscopy. Furthermore, the last part will summarize recent advances in the synthesis and understanding of their structure-behavior relationship including novel computational approaches.

Metal Ions Doping for Boosting Luminescence of Lanthanide-Doped Nanocrystals

With the developing need for luminous materials with better performance, lanthanide-doped nanocrystals have been widely studied for their unique luminescence properties such as their narrow bandwidth emission, excellent chemical stability, and photostability, adjustable emission color, high signal-to-background ratio, deeper tissue penetration with less photo-damage, and low toxicity, etc., which triggered enthusiasm for research on the broad applications of lanthanide-doped nanocrystals in bioimaging, anti-counterfeiting, biosensing, and cancer diagnosis and treatment. Considerable progress has been made in the past few decades, but low upconversion luminescence efficiency has been a hindrance in achieving further progress. It is necessary to summarize the recently relevant literature and find solutions to improve the efficiency. The latest experimental and theoretical studies related to the deliberate design of rare earth luminescent nanocrystals have, however, shown the development of metal ion-doped approaches to enhance the luminescent intensity. Host lattice manipulation can enhance the luminescence through increasing the asymmetry, which improves the probability of electric dipole transition; and the energy transfer modulation offers a reduced cross-relaxation pathway to improve the efficiency of the energy transfer. Based on the mechanisms of host lattice manipulation and energy transfer modulation, a wide range of enhancements at all wavelengths or even within a particular wavelength have been accomplished with an enhancement of up to a hundred times. In this mini review, we present the strategy of metal ion-doped lanthanide nanocrystals to cope with the issue of enhancing luminescence, overview the advantages and tricky challenges in boosting the luminescence, and provide a potential trend of future study in this field.

Functionalized magnetic PAMAM dendrimer as an efficient nanocatalyst for a new synthetic strategy of xanthene pigments

A green protocol has been developed for preparation of the wide variety of colored xanthene derivatives using a new efficient magnetic solid acid catalyst bearing polyamidoamine dendrimer moiety as a nanoscopic compound. Dendrimers, highly symmetric molecules around a core and 3D spherical morphology, show interesting traits based on their functionalized groups on the branched surface. They can be designed to provide water soluble structures or pseudo-active sites of biomolecules. The catalyst was assembled via a polyamidoamine dendrimer immobilized on the surface of γ-Fe₂O₃ followed by the sulfonylation of the amine groups by chlorosulfonic acid resulting in γ-Fe₂O₃@PAMAM-SO₃H. Herein, PAMAM dendrimer with repeating amine/amide branches as catchable sites of sulfonic acid groups was introduced as transformer of homogeneous to heterogeneous acidic catalysts. The physicochemical properties of synthesized catalyst were studied using by FT-IR, FE-SEM, XRD, VSM, EDS, TGA/DTG, and TEM. Finally, the catalytic activity of γ-Fe₂O₃@PAMAM-SO₃H was evaluated for the preparation of xanthene derivatives via a one-pot, three components reaction of aromatic aldehydes with i) β-naphthol, ii) cyclic 1,3-dicarbonyl, iii) β-naphthol and cyclic 1,3-dicarbonyl compounds, iv) 2-hydroxy-1,4-naphthoquinone, leading to the eco-riendly preparation of the target compounds in good to excellent yields. The catalyst could be easily recycled for at least five consecutive runs without significant loss in its catalytic activity.

Optical Sensing and Imaging of pH Values: Spectroscopies, Materials, and Applications

This is the first comprehensive review on methods and materials for use in optical sensing of pH values and on applications of such sensors. The Review starts with an introduction that contains subsections on the definition of the pH value, a brief look back on optical methods for sensing of pH, on the effects of ionic strength on pH values and pKa values, on the selectivity, sensitivity, precision, dynamic ranges, and temperature dependence of such sensors. Commonly used optical sensing schemes are covered in a next main chapter, with subsections on methods based on absorptiometry, reflectometry, luminescence, refractive index, surface plasmon resonance, photonic crystals, turbidity, mechanical displacement, interferometry, and solvatochromism. This is followed by sections on absorptiometric and luminescent molecular probes for use pH in sensors. Further large sections cover polymeric hosts and supports, and methods for immobilization of indicator dyes. Further and more specific sections summarize the state of the art in materials with dual functionality (indicator and host), nanomaterials, sensors based on upconversion and 2-photon absorption, multiparameter sensors, imaging, and sensors for extreme pH values. A chapter on the many sensing formats has subsections on planar, fiber optic, evanescent wave, refractive index, surface plasmon resonance and holography based sensor designs, and on distributed sensing. Another section summarizes selected applications in areas, such as medicine, biology, oceanography, bioprocess monitoring, corrosion studies, on the use of pH sensors as transducers in biosensors and chemical sensors, and their integration into flow-injection analyzers, microfluidic devices, and lab-on-a-chip systems. An extra section is devoted to current challenges, with subsections on challenges of general nature and those of specific nature. A concluding section gives an outlook on potential future trends and perspectives.

Multicolor Activatable Raman Probes for Simultaneous Detection of Plural Enzyme Activities

Raman probes based on alkyne or nitrile tags hold promise for highly multiplexed imaging. However, sensing of enzyme activities with Raman probes is difficult because few mechanisms are available to modulate the vibrational response. Here we present a general strategy to prepare activatable Raman probes that show enhanced Raman signals due to electronic preresonance (EPR) upon reaction with enzymes under physiological conditions. We identified a xanthene derivative bearing a nitrile group at position 9 (9CN-JCP) as a suitable scaffold dye, and synthesized four types of activatable Raman probes, which are targeted to different enzymes (three aminopeptidases and a glycosidase) and tuned to different vibrational frequencies by isotope editing of the nitrile group. We validated the activation of the Raman signals of these probes by the target enzymes and succeeded in simultaneous imaging of the four enzyme activities in live cells. Different cell lines showed different patterns of these enzyme activities.

Resorufin-based responsive probes for fluorescence and colorimetric analysis

The fluorescence imaging technique has attracted increasing attention in the detection of various biological molecules in situ and in real-time owing to its inherent advantages including high selectivity and sensitivity, outstanding spatiotemporal resolution and fast feedback. In the past few decades, a number of fluorescent probes have been developed for bioassays and imaging by exploiting different fluorophores. Among various fluorophores, resorufin exhibits a high fluorescence quantum yield, long excitation/emission wavelength and pronounced ability in both fluorescence and colorimetric analysis. This fluorophore has been widely utilized in the design of responsive probes specific for various bioactive species. In this review, we summarize the advances in the development of resorufin-based fluorescent probes for detecting various analytes, such as cations, anions, reactive (redox-active) sulfur species, small molecules and biological macromolecules. The chemical structures of probes, response mechanisms, detection limits and practical applications are investigated, which is followed by the discussion of recent challenges and future research perspectives. This review article is expected to promote the further development of resorufin-based responsive fluorescent probes and their biological applications.

Mitocanic Di- and Triterpenoid Rhodamine B Conjugates

The combination of the “correct” triterpenoid, the “correct” spacer and rhodamine B (RhoB) seems to be decisive for the ability of the conjugate to accumulate in mitochondria. So far, several triterpenoid rhodamine B conjugates have been prepared and screened for their cytotoxic activity. To obtain cytotoxic compounds with EC₅₀ values in a low nano-molar range combined with good tumor/non-tumor selectivity, the Rho B unit has to be attached via an amine spacer to the terpenoid skeleton. To avoid spirolactamization, secondary amines have to be used. First results indicate that a homopiperazinyl spacer is superior to a piperazinyl spacer. Hybrids derived from maslinic acid or tormentic acid are superior to those from oleanolic, ursolic, glycyrrhetinic or euscaphic acid. Thus, a tormentic acid-derived RhoB conjugate 32, holding a homopiperazinyl spacer can be regarded, at present, as the most promising candidate for further biological studies.