Dwindling the re-stacking by simultaneous exfoliation of boron nitride and decoration of α-Fe2O3nanoparticles using a solvothermal route

The decoration of cube-like α-Fe₂O₃nanoparticles onin situexfoliated h-BN nanosheets was demonstrated using a solvothermal method.

Hydrolytic Unzipping of Boron Nitride Nanotubes in Nitric Acid

Boron nitride nanoribbons (BNNRs) have very attractive electrical and optical properties due to their unique edge states and width-related properties. Herein, for the first time, BNNRs were produced by a simple reflux of boron nitride nanotubes (BNNTs) in nitric acid containing water, which had led to unzipped sidewalls through hydrolysis. Their high reactivity that originated from edges was verified via a strong interaction with methylene blue.

Robust 2D Room-Temperature Dilute Ferrimagnetism Enhancement in Freestanding Ammoniated Atom-Thin [0001] h-BN Nanoplates

The author reports an anthracene vapor-assisted transport growth (∼4.8% in yield) of freestanding atomically thin pristine two-dimensional (2D) hexagonal boron nitride (h-BN) nanoplates directly from bulk powders. A room-temperature dilute magnetism was first observed in the pyrolytic 2D [0001] h-BN nanoplates, which is attributed to the missing N atom numbers (N_N) or existence of a nitrogen-vacancy (N_v) with volume fraction ∼1.46%. Upon the postannealing in ammonia, the unsupported ammoniated 2D h-BN nanoplates showed an enhanced robust ferrimagnetism with the effective magnetic moment as high as 0.024 μ_B/per N, and Néel temperature at 174.9 K. At 295 K, a symmetric electron paramagnetic resonance peak signal was experimentally measured at g ∼ 2.1267, revealing the presence of an unpaired electron trapped at a B atom site in B-rich h-BN. As a promising 2D dilute magnetic semiconductor candidate, our finding favors the ammoniated atom-thin h-BN nanoplate for realization of spintronic nanodevices operating at room temperature.

Metal Thio- and Selenophosphates as Multifunctional van der Waals Layered Materials

Since the discovery of Dirac physics in graphene, research in 2D materials has exploded with the aim of finding new materials and harnessing their unique and tunable electronic and optical properties. The follow-on work on 2D dielectrics and semiconductors has led to the emergence and development of hexagonal boron nitride, black phosphorus, and transition metal disulfides. However, the spectrum of good insulating materials is still very narrow. Likewise, 2D materials exhibiting correlated phenomena such as superconductivity, magnetism, and ferroelectricity have yet to be developed or discovered. These properties will significantly enrich the spectrum of functional 2D materials, particularly in the case of high phase-transition temperatures. They will also advance a fascinating fundamental frontier of size and proximity effects on correlated ground states. Here, a broad family of layered metal thio(seleno)phosphate materials that are moderate- to wide-bandgap semiconductors with incipient ionic conductivity and a host of ferroic properties are reviewed. It is argued that this material class has the potential to merge the sought-after properties of complex oxides with electronic functions of 2D and quasi-2D electronic materials, as well as to create new avenues for both applied and fundamental materials research in structural and magnetic correlations.

Tuning the Chemical Hardness of Boron Nitride Nanosheets by Doping Carbon for Enhanced Adsorption Capacity

The chemical hardness of adsorbents is an important physicochemical property in the process of adsorption based on the hard and soft acids and bases (HSAB) theory. Tuning chemical hardness of adsorbents modulated by their concomitants is a promising approach to enhance the adsorptive capacity in principle. In the present work, we report an efficient strategy that the adsorption capacity for aromatic sulfocompounds can be enhanced by tuning the chemical hardness. This strategy is first theoretically explored by introducing C element into the network of hexagonal boron nitride (h-BN) based on a series of model materials (model_xC, x = 1-5). Computational results show that the chemical hardness is reduced after gradually C-doping, which may lead to an enhancement of adsorption capacity according to the HSAB theory. Then, a series of C-doped h-BN materials (BCN-x, x = 10-50) were controlled synthesized. All of the as-prepared materials show better adsorption capacities (e.g., 27.43 mg g^-1 for BCN-50) than pure h-BN. Experiment results show that the adsorption capacity correlates well with the C content in the BCN-x, which is consistent with the results predicted by theoretical calculation. This strategy may be helpful to rationally design highly efficient adsorbents in separation engineering and may be expanded to similar two-dimensional materials, where the π-π interaction is the dominant driven force.

The Edge Stresses and Phase Transitions for Magnetic BN Zigzag Nanoribbons

The edge states are of particular importance to understand fundamental properties of finite two-dimensional (2D) crystals. Based on first-principles calculations, we investigated on the bare zigzag boron nitride nanoribbons (zzBNNRs) with different spin-polarized states well localized at and extended along their edges. Our calculations examined the edge stress, which is sensitively dependent on the magnetic edge states, for either B-terminated edge or N-terminated edge. Moreover, we revealed that different magnetic configurations lead to a rich spectrum of electronic behaviors at edges. Using an uniaxial tensile strain, we proposed the magnetic phase transitions and thereby obtained the metallic to half-metallic (or reverse) phase transitions at edges. It suggests zzBNNR as a promising candidate for potential applications of non-metal spintronic devices.

Growth of Au Nanoparticles on 2D Metalloporphyrinic Metal-Organic Framework Nanosheets Used as Biomimetic Catalysts for Cascade Reactions

Inspired by the multiple functions of natural multienzyme systems, a new kind of hybrid nanosheet is designed and synthesized, i.e., ultrasmall Au nanoparticles (NPs) grown on 2D metalloporphyrinic metal-organic framework (MOF) nanosheets. Since 2D metalloporphyrinic MOF nanosheets can act as the peroxidase mimics and Au NPs can serve as artificial glucose oxidase, the hybrid nanosheets are used to mimic the natural enzymes and catalyze the cascade reactions. Furthermore, the synthesized hybrid nanosheets are used to detect biomolecules, such as glucose. This study paves a new avenue to design nanomaterial-based biomimetic catalysts with multiple complex functions.

Fluorinated h-BN as a magnetic semiconductor

We report the fluorination of electrically insulating hexagonal boron nitride (h-BN) and the subsequent modification of its electronic band structure to a wide bandgap semiconductor via introduction of defect levels. The electrophilic nature of fluorine causes changes in the charge distribution around neighboring nitrogen atoms in h-BN, leading to room temperature weak ferromagnetism. The observations are further supported by theoretical calculations considering various possible configurations of fluorinated h-BN structure and their energy states. This unconventional magnetic semiconductor material could spur studies of stable two-dimensional magnetic semiconductors. Although the high thermal and chemical stability of h-BN have found a variety of uses, this chemical functionalization approach expands its functionality to electronic and magnetic devices.

Enhanced Superhydrophobic Performance of BN-MoS2 Heterostructure Prepared via a Rapid, One-Pot Supercritical Fluid Processing

Fabrication of highly crystalline BN-MoS₂ heterostructure with >95% yield was demonstrated using one-pot supercritical fluid processing within 30 min. The existence of 20-50 layers of BN-MoS₂ in the prepared heterostructure was confirmed by AFM analysis. The HR-TEM imaging and mapping analysis revealed the well-melded BN and MoS₂ nanosheets in the heterostructure. The drastic reduction in XRD line intensities corresponding to the (002) plane and broadening of the peaks for the BN system over MoS₂ indicated the effective exfoliation and lateral size reduction in BN nanosheets during SCF processing. Also, the exfoliated MoS₂ nanosheets are preferentially exposed rather than BN nanosheets; consequently, the MoS₂ nanosheets sturdily covered BN nanosheets in the heterostructure. The exfoliated BN and MoS₂ nanosheets with nanoscale roughness make the surface highly hydrophobic in nature. As a result, the BN-MoS₂ heterostructure showed superior superhydrophobic performance with high water contact angle of 165.9°, which is much higher than the value reported in the literature.

Understanding the colloidal dispersion stability of 1D and 2D materials: Perspectives from molecular simulations and theoretical modeling

The colloidal dispersion stability of 1D and 2D materials in the liquid phase is critical for scalable nano-manufacturing, chemical modification, composites production, and deployment as conductive inks or nanofluids. Here, we review recent computational and theoretical studies carried out by our group to model the dispersion stability of 1D and 2D materials, including single-walled carbon nanotubes, graphene, and graphene oxide in aqueous surfactant solutions or organic solvents. All-atomistic (AA) molecular dynamics (MD) simulations can probe the molecular level details of the adsorption morphology of surfactants and solvents around these materials, as well as quantify the interaction energy between the nanomaterials mediated by surfactants or solvents. Utilizing concepts from reaction kinetics and diffusion, one can directly predict the rate constants for the aggregation kinetics and dispersion life times using MD outputs. Furthermore, the use of coarse-grained (CG) MD simulations allows quantitative prediction of surfactant adsorption isotherms. Combined with the Poisson-Boltzmann equation, the Langmuir isotherm, and the DLVO theory, one can directly use CGMD outputs to: (i) predict electrostatic potentials around the nanomaterial, (ii) correlate surfactant surface coverages with surfactant concentrations in the bulk dispersion medium, and (iii) determine energy barriers against coagulation. Finally, we discuss challenges associated with studying emerging 2D materials, such as, hexagonal boron nitride (h-BN), phosphorene, and transition metal dichalcogenides (TMDCs), including molybdenum disulfide (MoS₂). An outlook is provided to address these challenges with plans to develop force-field parameters for MD simulations to enable predictive modeling of emerging 2D materials in the liquid phase.

Introducing Overlapping Grain Boundaries in Chemical Vapor Deposited Hexagonal Boron Nitride Monolayer Films

We demonstrate the growth of overlapping grain boundaries in continuous, polycrystalline hexagonal boron nitride (h-BN) monolayer films via scalable catalytic chemical vapor deposition. Unlike the commonly reported atomically stitched grain boundaries, these overlapping grain boundaries do not consist of defect lines within the monolayer films but are composed of self-sealing bilayer regions of limited width. We characterize this overlapping h-BN grain boundary structure in detail by complementary (scanning) transmission electron microscopy techniques and propose a catalytic growth mechanism linked to the subsurface/bulk of the process catalyst and its boron and nitrogen solubilities. Our data suggest that the overlapping grain boundaries are comparatively resilient against deleterious pinhole formation associated with grain boundary defect lines and thus may reduce detrimental breakdown effects when polycrystalline h-BN monolayer films are used as ultrathin dielectrics, barrier layers, or separation membranes.

Electrochemical performance of Ti3C2Tx MXene in aqueous media: towards ultrasensitive H2O2 sensing

An extensive characterization of pristine and oxidized Ti₃C₂T_x (T: =O, -OH, -F) MXene showed that exposure of MXene to an anodic potential in the aqueous solution oxidizes the nanomaterial forming TiO₂ layer or TiO₂ domains with subsequent TiO₂ dissolution by F^- ions, making the resulting nanomaterial less electrochemically active compared to the pristine Ti₃C₂T_x. The Ti₃C₂T_x could be thus applied for electrochemical reactions in a cathodic potential window i.e. for ultrasensitive detection of H₂O₂ down to nM level with a response time of approx. 10 s. The manuscript also shows electrochemical behavior of Ti₃C₂T_x modified electrode towards oxidation of NADH and towards oxygen reduction reactions.

Recent progress in van der Waals heterojunctions

Following the development of many novel two-dimensional (2D) materials, investigations of van der Waals heterojunctions (vdWHs) have attracted significant attention due to their excellent properties such as smooth heterointerface, highly gate-tunable bandgap, and ultrafast carrier transport. Benefits from the atom-scale thickness, physical and chemical properties and ease of manipulation of the heterojunctions formulated by weak vdW forces were demonstrated to indicate their outstanding potential in electronic and optoelectronic applications, including photodetection and energy harvesting, and the possibility of integrating them with the existing semiconductor technology for the next-generation electronic and sensing devices. In this review, we summarized the recent developments of vdWHs and emphasized their applications. Basically, we introduced the physical properties and some newly discovered phenomena in vdWHs. Then, we emphatically presented four classical vdWHs and some novel heterostructures formed by vdW forces. Based on their unique physical properties and structures, we highlighted the applications of vdWHs including in photodiodes, phototransistors, tunneling devices, and memory devices. Finally, we provided a conclusion on the recent advances in vdWHs and outlined our perspectives. We aim for this review to serve as a solid foundation in this field and to pave the way for future research on vdW-based materials and their heterostructures.

Layered microporous polymers by solvent knitting method

Two-dimensional (2D) nanomaterials, especially 2D organic nanomaterials with unprecedentedly diverse and controlled structure, have attracted decent scientific interest. Among the preparation strategies, the top-down approach is one of the considered low-cost and scalable strategies to obtain 2D organic nanomaterials. However, some factors of their layered counterparts limited the development and potential applications of 2D organic nanomaterials, such as type, stability, and strict synthetic conditions of layered counterparts. We report a class of layered solvent knitting hyper-cross-linked microporous polymers (SHCPs) prepared by improving Friedel-Crafts reaction and using dichloroalkane as an economical solvent, stable electrophilic reagent, and external cross-linker at low temperature, which could be used as layered counterparts to obtain previously unknown 2D SHCP nanosheets by method of ultrasonic-assisted solvent exfoliation. This efficient and low-cost strategy can produce previously unreported microporous organic polymers with layered structure and high surface area and gas storage capacity. The pore structure and surface area of these polymers can be controlled by tuning the chain length of the solvent, the molar ratio of AlCl3, and the size of monomers. Furthermore, we successfully obtain an unprecedentedly high-surface area HCP material (3002 m2 g-1), which shows decent gas storage capacity (4.82 mmol g-1 at 273 K and 1.00 bar for CO2; 12.40 mmol g-1 at 77.3 K and 1.13 bar for H2). This finding provides an opportunity for breaking the constraint of former knitting methods and opening up avenues for the design and synthesis of previously unknown layered HCP materials.

Molecular assembly on two-dimensional materials

Molecular self-assembly is a well-known technique to create highly functional nanostructures on surfaces. Self-assembly on two-dimensional (2D) materials is a developing field driven by the interest in functionalization of 2D materials in order to tune their electronic properties. This has resulted in the discovery of several rich and interesting phenomena. Here, we review this progress with an emphasis on the electronic properties of the adsorbates and the substrate in well-defined systems, as unveiled by scanning tunneling microscopy. The review covers three aspects of the self-assembly. The first one focuses on non-covalent self-assembly dealing with site-selectivity due to inherent moiré pattern present on 2D materials grown on substrates. We also see that modification of intermolecular interactions and molecule-substrate interactions influences the assembly drastically and that 2D materials can also be used as a platform to carry out covalent and metal-coordinated assembly. The second part deals with the electronic properties of molecules adsorbed on 2D materials. By virtue of being inert and possessing low density of states near the Fermi level, 2D materials decouple molecules electronically from the underlying metal substrate and allow high-resolution spectroscopy and imaging of molecular orbitals. The moiré pattern on the 2D materials causes site-selective gating and charging of molecules in some cases. The last section covers the effects of self-assembled, acceptor and donor type, organic molecules on the electronic properties of graphene as revealed by spectroscopy and electrical transport measurements. Non-covalent functionalization of 2D materials has already been applied for their application as catalysts and sensors. With the current surge of activity on building van der Waals heterostructures from atomically thin crystals, molecular self-assembly has the potential to add an extra level of flexibility and functionality for applications ranging from flexible electronics and OLEDs to novel electronic devices and spintronics.

Mechanical properties and failure behavior of phosphorene with grain boundaries

Using the density-functional tight-binding method, we studied the effect of grain boundaries on the mechanical properties and failure behavior of phosphorene. We found that the high-angle tilt boundaries with a higher density of (5∣7) defect pairs (oriented along the armchair direction) are stronger than the low-angle tilt boundaries with a lower defect density, and similarly the high-angle boundaries with a higher density of (4∣8) defect pairs (oriented along the zigzag direction) are stronger than the low-angle boundaries with a lower defect density. The failure is due to the rupture of the most pre-strained bonds in the heptagons of the (5∣7) defect pair or octagons of the (4∣8) pairs. The high-angle grain boundaries are better at accommodating the pre-strained bonds in heptagon and octagon defects, leading to a higher failure stress and strain. The results cannot be described by a Griffith-type fracture mechanics criterion, since this does not take into account the bond pre-stretching. Interestingly, these anomalous mechanical and failure characteristics of tilt grain boundaries in phosphorene are also shared by graphene and hexagonal boron nitride, signifying that they may be universal for 2D materials. The findings revealed here may be useful in tuning the mechanical properties of phosphorene via defect engineering for specific applications.

Relationships between the elastic and fracture properties of boronitrene and molybdenum disulfide and those of graphene

A consistent set of 2D elastic and fracture properties of hexagonal boron nitride (h-BN) monolayers (boronitrene) and molybdenum disulfide (MoS₂) nanosheets is derived. Reported literature values for Young's moduli and fracture strengths, based on experiments and DFT calculations, were used to estimate the line or edge energy with a local 2D bond-breaking model. Consistent information was obtained for intrinsic fracture properties. The basic mechanical properties of boronitrene are roughly 25% lower than the corresponding graphene values. This is consistent with the tensile bond force model, and the lower ionic-covalent bonding energy of sp²-hybridized B-N bonds in comparison with sp²-hybridized carbon bonds. While the intrinsic stiffness and strength of MoS₂ correlate with the strength of its constituent chemical bonds, DFT calculations of the line or edge energy scale with roughly two times the Mo-S bonding energy, whereas the 2D bond-breaking model yields a correlation similar to that found for h-BN. Additional failure properties such as the fracture toughness and strain energy release rate were determined. Together with the intrinsic strengths a Griffith plot of the effective strength of defective h-BN and MoS₂ versus the square root of half the defect size of single defects such as (multi)vacancies and micro-cracks exhibits a slope similar to that of the graphene plot.

Boron Nitride Nanosheet-Anchored Pd-Fe Core-Shell Nanoparticles as Highly Efficient Catalysts for Suzuki-Miyaura Coupling Reactions

Boron nitride nanosheets (BNNS) were used to anchor bimetallic Pd-Fe nanoparticles for Suzuki-Miyaura coupling catalysts. The bimetallic nanoparticles were found to be core-shell in structure, and their formation was likely facilitated by their interactions with the BNNS. The Pd-Fe/BNNS catalysts were highly effective in representative Suzuki-Miyaura reactions, with performances matching or exceeding those of the state-of-the-art methods. Specifically, the superior catalytic activities were characterized by generally shortened reaction times, minimal Pd usage, excellent reusability of the catalysts and high or nearly quantitative conversion yields in a benign solvent system without the need for any special conditions, such as ligands and surfactants or inert gas protection. The obvious advantages of the Pd-Fe/BNNS over similar catalysts based on other supports, such as reduced graphene oxide (rGO), suggest that BNNS may be developed into a versatile platform for many other important catalytic reactions.

Surface chemistry and catalysis confined under two-dimensional materials

Interfaces between 2D material overlayers and solid surfaces provide confined spaces for chemical processes, which have stimulated new chemistry under a 2D cover.

Atomically Thin Hexagonal Boron Nitride Nanofilm for Cu Protection: The Importance of Film Perfection

Outstanding protection of Cu by high-quality boron nitride nanofilm (BNNF) 1-2 atomic layers thick in salt water is observed, while defective BNNF accelerates the reaction of Cu toward water. The chemical stability, insulating nature, and impermeability of ions through the BN hexagons render BNNF a great choice for atomic-scale protection.

Catalyst Interface Engineering for Improved 2D Film Lift-Off and Transfer

The mechanisms by which chemical vapor deposited (CVD) graphene and hexagonal boron nitride (h-BN) films can be released from a growth catalyst, such as widely used copper (Cu) foil, are systematically explored as a basis for an improved lift-off transfer. We show how intercalation processes allow the local Cu oxidation at the interface followed by selective oxide dissolution, which gently releases the 2D material (2DM) film. Interfacial composition change and selective dissolution can thereby be achieved in a single step or split into two individual process steps. We demonstrate that this method is not only highly versatile but also yields graphene and h-BN films of high quality regarding surface contamination, layer coherence, defects, and electronic properties, without requiring additional post-transfer annealing. We highlight how such transfers rely on targeted corrosion at the catalyst interface and discuss this in context of the wider CVD growth and 2DM transfer literature, thereby fostering an improved general understanding of widely used transfer processes, which is essential to numerous other applications.

Facile and Green Production of Impurity-Free Aqueous Solutions of WS2 Nanosheets by Direct Exfoliation in Water

To obtain 2D materials with large quantity, low cost, and little pollution, liquid-phase exfoliation of their bulk form in water is a particularly fascinating concept. However, the current strategies for water-borne exfoliation exclusively employ stabilizers, such as surfactants, polymers, or inorganic salts, to minimize the extremely high surface energy of these nanosheets and stabilize them by steric repulsion. It is worth noting, however, that the remaining impurities inevitably bring about adverse effects to the ultimate performances of 2D materials. Here, a facile and green route to large-scale production of impurity-free aqueous solutions of WS₂ nanosheets is reported by direct exfoliation in water. Crucial parameters such as initial concentration, sonication time, centrifugation speed, and centrifugation time are systematically evaluated to screen out an optimized condition for scaling up. Statistics based on morphological characterization prove that substantial fraction (66%) of the obtained WS₂ nanosheets are one to five layers. X-ray diffraction and Raman characterizations reveal a high quality with few, if any, structural distortions. The water-borne exfoliation route opens up new opportunities for easy, clean processing of WS₂ -based film devices that may shine in the fields of, e.g., energy storage and functional nanocomposites owing to their excellent electrochemical, mechanical, and thermal properties.

Selective oxidative dehydrogenation of propane to propene using boron nitride catalysts

The exothermic oxidative dehydrogenation of propane reaction to generate propene has the potential to be a game-changing technology in the chemical industry. However, even after decades of research, selectivity to propene remains too low to be commercially attractive because of overoxidation of propene to thermodynamically favored CO₂ Here, we report that hexagonal boron nitride and boron nitride nanotubes exhibit unique and hitherto unanticipated catalytic properties, resulting in great selectivity to olefins. As an example, at 14% propane conversion, we obtain selectivity of 79% propene and 12% ethene, another desired alkene. Based on catalytic experiments, spectroscopic insights, and ab initio modeling, we put forward a mechanistic hypothesis in which oxygen-terminated armchair boron nitride edges are proposed to be the catalytic active sites.

Engineering and Localization of Quantum Emitters in Large Hexagonal Boron Nitride Layers

Hexagonal boron nitride is a wide-band-gap van der Waals material that has recently emerged as a promising platform for quantum photonics experiments. In this work, we study the formation and localization of narrowband quantum emitters in large flakes (up to tens of micrometers wide) of hexagonal boron nitride. The emitters can be activated in as-grown hexagonal boron nitride by electron irradiation or high-temperature annealing, and the emitter formation probability can be increased by ion implantation or focused laser irradiation of the as-grown material. Interestingly, we show that the emitters are always localized at the edges of the flakes, unlike most luminescent point defects in three-dimensional materials. Our results constitute an important step on the roadmap of deploying hexagonal boron nitride in nanophotonics applications.

Imaging and controlling plasmonic interference fields at buried interfaces

Capturing and controlling plasmons at buried interfaces with nanometre and femtosecond resolution has yet to be achieved and is critical for next generation plasmonic devices. Here we use light to excite plasmonic interference patterns at a buried metal–dielectric interface in a nanostructured thin film. Plasmons are launched from a photoexcited array of nanocavities and their propagation is followed via photon-induced near-field electron microscopy (PINEM). The resulting movie directly captures the plasmon dynamics, allowing quantification of their group velocity at ∼0.3 times the speed of light, consistent with our theoretical predictions. Furthermore, we show that the light polarization and nanocavity design can be tailored to shape transient plasmonic gratings at the nanoscale. This work, demonstrating dynamical imaging with PINEM, paves the way for the femtosecond and nanometre visualization and control of plasmonic fields in advanced heterostructures based on novel two-dimensional materials such as graphene, MoS₂, and ultrathin metal films.

Visualizing surface plasmon polaritons at buried interfaces has remained elusive. Here, the authors develop a methodology to study the spatiotemporal evolution of buried near-fields within complex heterostructures, enabling the characterization of the next generation of plasmonic devices.

Boron Nitride Nanostructures: Fabrication, Functionalization and Applications

Boron nitride (BN) structures are featured by their excellent thermal and chemical stability and unique electronic and optical properties. However, the lack of controlled synthesis of quality samples and the electrically insulating property largely prevent realizing the full potential of BN nanostructures. A comprehensive overview of the current status of the synthesis of two-dimensional hexagonal BN sheets, three dimensional porous hexagonal BN materials and BN-involved heterostructures is provided, highlighting the advantages of different synthetic methods. In addition, structural characterization, functionalizations and prospective applications of hexagonal BN sheets are intensively discussed. One-dimensional BN nanoribbons and nanotubes are then discussed in terms of structure, fabrication and functionality. In particular, the existing routes in pursuit of tunable electronic and magnetic properties in various BN structures are surveyed, calling upon synergetic experimental and theoretical efforts to address the challenges for pioneering the applications of BN into functional devices. Finally, the progress in BN superstructures and novel B/N nanostructures is also briefly introduced.

Conceptual design of tetraazaporphyrin- and subtetraazaporphyrin-based functional nanocarbon materials: electronic structures, topologies, optical properties, and methane storage capacities

A large variety of conceptual three- and fourfold tetraazaporphyrin- and subtetraazaporphyrin-based functional 3D nanocage and nanobarrel structures have been proposed on the basis of in silico design. The designed structures differ in their sizes, topology, porosity, and conjugation properties. The stability of nanocages of Oh symmetry and nanobarrels of D4h symmetry was revealed on the basis of DFT and MD calculations, whereas their optical properties were assessed using a TDDFT approach and a long-range corrected LC-wPBE exchange-correlation functional. It was shown that the electronic structures and vertical excitation energies of the functional nanocage and nanobarrel structures could be easily tuned via their size, topology, and the presence of bridging sp(3) carbon atoms. TDDFT calculations suggest significantly lower excitation energies in fully conjugated nanocages and nanobarrels compared with systems with bridging sp(3) carbon fragments. Based on DFT and TDDFT calculations, the optical properties of the new materials can rival those of known quantum dots and are superior to those of monomeric phthalocyanines and their analogues. The methane gas adsorption properties of the new nanostructures and nanotubes generated by conversion from nanobarrels were studied using an MD simulation approach. The ability to store large quantities of methane (106-216 cm(3) (STP) cm(-3)) was observed in all cases with several compounds being close to or exceeding the DOE target of 180 cm(3) (STP) cm(-3) for material-based methane storage at a pressure of 3.5 MPa and room temperature.

Phosphorene under electron beam: from monolayer to one-dimensional chains

Phosphorene, a single sheet of black phosphorus, is an elemental two-dimensional material with unique properties and potential applications in semiconductor technology. While few-layer flakes of the material have been characterized using transmission electron microscopy, very little is known about its response to electron irradiation, which may be particularly important in the context of top-down engineering of phosphorus nanostructures using a focused electron beam. Here, using first-principles simulations, we study the production of defects in a single phosphorene sheet under impacts of energetic electrons. By employing the McKinley-Feshbach formalism and accounting for the thermal motion of atoms, we assess the cross section for atom displacement as a function of electron energy. We further investigate the energetics and dynamics of point defects and the stability of ribbons and edges under an electron beam. Finally, we show that P atomic chains should be surprisingly stable, and their atomic structure is not linear giving rise to the absence of a gap in the electronic spectrum.

High-Yield Production of Boron Nitride Nanosheets and Its Uses as a Catalyst Support for Hydrogenation of Nitroaromatics

Single- or few-layered h-BN nanosheets (BNNSs) are analogous to graphene and possess unique properties. However, their technological applications were severely hindered by the low production efficiency of BNNSs. We reported here a study in which BNNSs were efficiently produced by exfoliating bulk h-BN powder in thionyl chloride without using any dispersion agents. The BNNSs yield was as high as 20%, and it could be doubled through the second round of exfoliation of the h-BN precipitate. Microscopic results revealed that the BNNSs generally consisted of 3-20 layers. Pd nanoparticles were successfully immobilized and uniformly distributed on BNNS surfaces through the deposition-precipitation method. The resultant Pd-BNNS catalyst exhibited high catalytic activity and recyclability for the hydrogenation of nitro aromatics, demonstrating that BNNSs served as a promising platform to fabricate heterogeneous catalysts.

Van der Waals stacks of few-layer h-AlN with graphene: an ab initio study of structural, interaction and electronic properties

Graphite-like hexagonal AlN (h-AlN) multilayers have been experimentally manifested and theoretically modeled. The development of any functional electronics applications of h-AlN would most certainly require its integration with other layered materials, particularly graphene. Here, by employing vdW-corrected density functional theory calculations, we investigate structure, interaction energy, and electronic properties of van der Waals stacking sequences of few-layer h-AlN with graphene. We find that the presence of a template such as graphene induces enough interlayer charge separation in h-AlN, favoring a graphite-like stacking formation. We also find that the interface dipole, calculated per unit cell of the stacks, tends to increase with the number of stacked layers of h-AlN and graphene.

Fabrication of Boron Nitride Nanosheets by Exfoliation

Nanomaterials with layered structures, with their intriguing properties, are of great research interest nowadays. As one of the primary two-dimensional nanomaterials, the hexagonal boron nitride nanosheet (BNNS, also called white graphene), which is an analogue of graphene, possesses various attractive properties, such as high intrinsic thermal conductivity, excellent chemical and thermal stability, and electrical insulation properties. After being discovered, it has been one of the most intensively studied two-dimensional non-carbon nanomaterials and has been applied in a wide range of applications. To support the exploration of applications of BNNSs, exfoliation, as one of the most promising approaches to realize large-scale production of BNNSs, has been intensively investigated. In this review, methods to yield BNNSs by exfoliation will be summarized and compared with other potential fabrication methods of BNNSs. In addition, the future prospects of the exfoliation of h-BN will also be discussed.

Two-dimensional graphitic carbon nitride nanosheets for biosensing applications

Two-dimensional graphitic carbon nitride nanosheets (CNNSs) with planar graphene-like structure have stimulated increasingly research interest in recent years due to their unique physicochemical properties. CNNSs possess superior stability, high fluorescence quantum yield, low-toxicity, excellent biocompatibility, unique electroluminescent and photoelectrochemical properties, which make them appropriate candidates for biosensing. In this review, we first introduce the preparation and unique properties of CNNSs, with emphasis on their superior properties for biosensing. Then, recent advances of CNNSs in photoelectrochemical biosensing, electrochemiluminescence biosensing and fluorescence biosensing are highlighted. An additional attention is paid to the marriage of CNNSs and nucleic acids, which exhibits great potentials in both biosensing and intracellular imaging. Finally, current challenges and opportunities of this 2D material are outlined. Inspired by the unique properties of CNNSs and their advantages in biological applications, we expect that more attention will be drawn to this promising 2D material and extensive applications can be found in bioanalysis and diseases diagnosis.

Aqueous compatible boron nitride nanosheets for high-performance hydrogels

Hexagonal boron nitride nanosheets (BNNSs) possess ultimate thermal and chemical stabilities and mechanical strengths. However, the unmodified BNNSs are hydrophobic and insoluble in water, which hinders their use in many technological areas requiring aqueous compatibility. In this work, h-BN was treated with molten citric acid to produce aqueous dispersible boron nitride sheets (ca-BNNSs). The resultant ca-BNNSs were used to fabricate ca-BNNS/polyacrylamide (i.e., BNNS2.5/PAAm) nanocomposite hydrogels, targeting high water retentivity and flexibility. The BNNS2.5/PAAm hydrogel (initially swollen in water) largely remained swollen (water content ∼94 wt%) even after one-year storage under ambient conditions. Importantly, the swollen BNNS2.5/PAAm hydrogel (water content ∼95 wt%) was highly flexible. Its elongation and compressive strength exceeded 10,000% and 8 MPa at 97% strain, respectively. Moreover, the aforementioned hydrogel recovered upon the removal of compression force, without obvious damage. The substantially improved water retentivity and flexibility revealed that BNNSs can serve as a promising new platform in the development of high-performance hydrogels.

Controlling Catalyst Bulk Reservoir Effects for Monolayer Hexagonal Boron Nitride CVD

Highly controlled Fe-catalyzed growth of monolayer hexagonal boron nitride (h-BN) films is demonstrated by the dissolution of nitrogen into the catalyst bulk via NH3 exposure prior to the actual growth step. This "pre-filling" of the catalyst bulk reservoir allows us to control and limit the uptake of B and N species during borazine exposure and thereby to control the incubation time and h-BN growth kinetics while also limiting the contribution of uncontrolled precipitation-driven h-BN growth during cooling. Using in situ X-ray diffraction and in situ X-ray photoelectron spectroscopy combined with systematic growth calibrations, we develop an understanding and framework for engineering the catalyst bulk reservoir to optimize the growth process, which is also relevant to other 2D materials and their heterostructures.

Efficient dispersant-free liquid exfoliation down to the graphene-like state of solvent-free mechanochemically delaminated bulk hexagonal boron nitride

Efficient dispersant-free liquid exfoliation down to the graphene-like state of solvent-free mechanochemically delaminated bulk hexagonal boron nitride was shown.

Quantum dots derived from two-dimensional materials and their applications for catalysis and energy

Equipped with a wide range of extraordinary and tailorable properties, quantum dots derived from two-dimensional materials promise a spectrum of novel applications including catalysis and energy.

A template-free solvent-mediated synthesis of high surface area boron nitride nanosheets for aerobic oxidative desulfurization

Hexagonal BN nanosheets with high surface area are developed via methanol-mediated synthesis, presenting outstanding catalytic performance in aerobic oxidative desulfurization.