Structure of the HIV-1 integrase catalytic domain complexed with an inhibitor: a platform for antiviral drug design

A docking study of L-chicoric acid with HIV-1 integrase

Human immunodeficiency virus 1 integrase (HIV-1 IN) is the enzyme responsible for integrating the viral DNA into the host genome, and is essential to the replication of the virus. L-Chicoric acid (L-CA) is a bidentate catechol that has been identified as a potent inhibitor of HIV-1 IN. Using the new Autodock 4.0 free-energy function we have obtained a L-CA binding mode that explains its observed potency and is consistent with available experimental data. Because of the alpha,beta-unsaturated ester functionality of the side arms of L-CA we first performed an extensive conformational analysis of L-CA using semiempirical and ab initio calculations. As a result we have identified two distinct L-CA binding modes, one for the s-cis/s-cis and another for the s-cis/s-trans isomers. The most stable conformer was found to be the structure with the alpha,beta-unsaturated ester in the s-cis conformation for both arms of L-CA. This conformer also gave the top-ranked docking solution. Analysis of the interactions with key IN residues, combined with results using a L-CA tetraacetylated derivative and a Q148A IN mutant, correlate well with the experimental data.

Design and synthesis of bis-amide and hydrazide-containing derivatives of malonic acid as potential HIV-1 integrase inhibitors

HIV-1 integrase (IN) is an attractive and validated target for the development of novel therapeutics against AIDS. In the search for new IN inhibitors, we designed and synthesized three series of bis-amide and hydrazide-containing derivatives of malonic acid. We performed a docking study to investigate the potential interactions of the title compounds with essential amino acids on the IN active site.

Discovery of 3-acetyl-4-hydroxy-2-pyranone derivatives and their difluoridoborate complexes as a novel class of HIV-1 integrase inhibitors

HIV-1 integrase (IN) has emerged as an important therapeutic target for anti-HIV drug development. Its uniqueness to the virus and its critical role in the viral life cycle makes IN suitable for selective inhibition. The recent approval of Raltegravir (MK-0518) has created a surge in interest and great optimism in the field. In our ongoing IN drug design research, we herein report the discovery of substituted analogs of 3-acetyl-4-hydroxy-2-pyranones and their difluoridoborate complexes as novel IN inhibitors. In many of these compounds, complexation with boron difluoride increased the potency and selectivity of IN inhibition. Compound 9 was most active with an IC(50) value of 9 microM and 3 microM for 3'-processing and strand transfer inhibition, respectively.

Resistance mutations in human immunodeficiency virus type 1 integrase selected with elvitegravir confer reduced susceptibility to a wide range of integrase inhibitors

Integration of viral DNA into the host chromosome is an essential step in the life cycle of retroviruses and is facilitated by the viral integrase enzyme. The first generation of integrase inhibitors recently approved or currently in late-stage clinical trials shows great promise for the treatment of human immunodeficiency virus (HIV) infection, but virus is expected to develop resistance to these drugs. Therefore, we used a novel resistance selection protocol to follow the emergence of resistant HIV in the presence of the integrase inhibitor elvitegravir (GS-9137). We find the primary resistance-conferring mutations to be Q148R, E92Q, and T66I and demonstrate that they confer a reduction in susceptibility not only to elvitegravir but also to raltegravir (MK-0518) and other integrase inhibitors. The locations of the mutations are highlighted in the catalytic sites of integrase, and we correlate the mutations with expected drug-protein contacts. In addition, mutations that do not confer reduced susceptibility when present alone (H114Y, L74M, R20K, A128T, E138K, and S230R) are also discussed in relation to their position in the catalytic core domain and their proximity to known structural features of integrase. These data broaden the understanding of antiviral resistance against integrase inhibitors and may give insight facilitating the discovery of second-generation compounds.

Natural variation of HIV-1 group M integrase: implications for a new class of antiretroviral inhibitors

HIV-1 integrase is the third enzymatic target of antiretroviral (ARV) therapy. However, few data have been published on the distribution of naturally occurring amino acid variation in this enzyme. We therefore characterized the distribution of integrase variants among more than 1,800 published group M HIV-1 isolates from more than 1,500 integrase inhibitor (INI)-naïve individuals. Polymorphism rates equal or above 0.5% were found for 34% of the central core domain positions, 42% of the C-terminal domain positions, and 50% of the N-terminal domain positions. Among 727 ARV-naïve individuals in whom the complete pol gene was sequenced, integrase displayed significantly decreased inter- and intra-subtype diversity and a lower Shannon's entropy than protease or RT. All primary INI-resistance mutations with the exception of E157Q--which was present in 1.1% of sequences--were nonpolymorphic. Several accessory INI-resistance mutations including L74M, T97A, V151I, G163R, and S230N were also polymorphic with polymorphism rates ranging between 0.5% to 2.0%.

D77, one benzoic acid derivative, functions as a novel anti-HIV-1 inhibitor targeting the interaction between integrase and cellular LEDGF/p75

Integration of viral-DNA into host chromosome mediated by the viral protein HIV-1 integrase (IN) is an essential step in the HIV-1 life cycle. In this process, Lens epithelium-derived growth factor (LEDGF/p75) is discovered to function as a cellular co-factor for integration. Since LEDGF/p75 plays an important role in HIV integration, disruption of the LEDGF/p75 interaction with IN has provided a special interest for anti-HIV agent discovery. In this work, we reported that a benzoic acid derivative, 4-[(5-bromo-4-{[2,4-dioxo-3-(2-oxo-2-phenylethyl)-1,3-thiazolidin-5-ylidene]methyl}-2-ethoxyphenoxy)methyl]benzoic acid (D77) could potently inhibit the IN-LEDGF/p75 interaction and affect the HIV-1 IN nuclear distribution thus exhibiting antiretroviral activity. Molecular docking with site-directed mutagenesis analysis and surface plasmon resonance (SPR) binding assays has clarified possible binding mode of D77 against HIV-1 integrase. As the firstly discovered small molecular compound targeting HIV-1 integrase interaction with LEDGF/p75, D77 might supply useful structural information for further anti-HIV agent discovery.

Novel quinolinonyl diketo acid derivatives as HIV-1 integrase inhibitors: design, synthesis, and biological activities

Novel quinolinonyl diketo acids were designed to obtain integrase (IN) inhibitors selectively active against the strand transfer (ST) step of the HIV integration process. Those new compounds are characterized by a single aryl diketo acid (DKA) chain in comparison to 4, a bifunctional diketo acid reported by our group as an anti-IN agent highly potent against both the 3'-processing and ST steps. Compound 6d was the most potent derivative in IN enzyme assays, while 6i showed the highest potency against HIV-1 in acutely infected cells. The selective inhibition of ST suggested the newly designed monofunctional DKAs bind the IN-DNA acceptor site without affecting the DNA donor site.

Novel dimeric aryldiketo containing inhibitors of HIV-1 integrase: effects of the phenyl substituent and the linker orientation

Aryl diketoacids (ADK) and their bioisosteres are among the most promising HIV-1 integrase (IN) inhibitors. Previously, we designed a series of ADK dimers as a new class of IN inhibitors that were hypothesized to target two divalent metal ions on the active site of IN. Herein we present a further structure-activity relationship (SAR) study with respect to the substituent effect of the ADK and the dimerization with conformationally constrained linkers such as piperazine, 4-amino-piperidine, piperidin-4-ol, and trans-cyclohexan-1,4-diamine. The substituents on the phenyl ring as well as the spatial orientation of the two diketo units were observed to play important roles in the IN inhibitory potency. The hydrophobic group was an optimal substitution at the 3-position of the aryl ring. The piperazine and 4-amino-piperidine linkers brought about the most potent analogs among the hydrophobic group or halogen substituted ADK dimers. The docking studies suggested that the bulky hydrophobic substitution at 3-phenyl ring and the linker of 4-amino-piperidine were beneficial for adopting an active conformation to achieve strong interactions with the active site Mg(2+) and the key residue E152 within the catalytic core domain. This study is a significant extension of our previous report on the dimeric ADK-containing IN inhibitors, providing a new promising template for further lead optimization.

Modeling, analysis, and validation of a novel HIV integrase structure provide insights into the binding modes of potent integrase inhibitors

It has been shown that L-731988, a potent integrase inhibitor, targets a conformation of the integrase enzyme formed when complexed to viral DNA, with the 3'-end dinucleotide already cleaved. It has also been shown that diketo acid inhibitors bind to the strand transfer complex of integrase and are competitive with the host target DNA. However, published X-ray structures of HIV integrase do not include the DNA; thus, there is a need to develop a model representing the strand transfer complex. In this study, we have constructed an active-site model of the HIV-1 integrase complexed with viral DNA using the crystal structure of DNA-bound transposase and have identified a binding mode for inhibitors. This proposed binding mechanism for integrase inhibitors involves interaction with a specific Mg(2+) in the active site, accentuated by a hydrophobic interaction in a cavity formed by a flexible loop upon DNA binding. We further validated the integrase active-site model by selectively mutating key residues predicted to play an important role in the binding of inhibitors. Thus, we have a binding model that is applicable to a wide range of potent integrase inhibitors and is consistent with the available resistant mutation data.

Recent progress in antiretrovirals--lessons from resistance

Recent failures in efforts to develop an effective vaccine against HIV-1 infection have emphasized the importance of antiretroviral therapy in treating HIV-1-infected patients. Thus far, inhibitors of two viral enzymes, reverse transcriptase and protease, have had a profoundly positive impact on the survival of HIV-1-infected patients. However, new inhibitors that act at diverse steps in the viral replication cycle are urgently needed because of the development of resistance to currently available antiretrovirals. This review summarizes recent progress in antiretroviral drug discovery and development by specifically focusing on novel inhibitors of three phases of replication: viral entry, integration of the viral DNA into the host cell genome and virus particle maturation.

HIV-1 drug resistance mutations: an updated framework for the second decade of HAART

More than 200 mutations are associated with antiretroviral resistance to drugs belonging to six licensed antiretroviral classes. More than 50 reverse transcriptase mutations are associated with nucleoside reverse transcriptase inhibitor resistance including M184V, thymidine analog mutations, mutations associated with non-thymidine analog containing regimens, multi-nucleoside resistance mutations, and several recently identified accessory mutations. More than 40 reverse transcriptase mutations are associated with nonnucleoside reverse transcriptase inhibitor resistance including major primary and secondary mutations, non-polymorphic minor mutations, and polymorphic accessory mutations. More than 60 mutations are associated with protease inhibitor resistance including major protease, accessory protease, and protease cleavage site mutations. More than 30 integrase mutations are associated with the licensed integrase inhibitor raltegravir and the investigational inhibitor elvitegravir. More than 15 gp41 mutations are associated with the fusion inhibitor enfuvirtide. CCR5 inhibitor resistance results from mutations that promote gp120 binding to an inhibitor-bound CCR5 receptor or CXCR4 tropism; however, the genotypic correlates of these processes are not yet well characterized.

Differences between ion binding to eag and HERG voltage sensors contribute to differential regulation of activation and deactivation gating

HERG (KCNH2) and ether-à-go-go (eag) (KCNH1) are members of the same subfamily of voltage-gated K+ channels. In eag, voltage-dependent activation is significantly slowed by extracellular divalent cations. To exert this effect, ions bind to a site located between transmembrane segments S2 and S3 in the voltage sensor domain where they interact with acidic residues that are conserved only among members of the eag subfamily. In HERG channels, extracellular divalent ions significantly accelerate deactivation. To investigate the ionbinding site in HERG, acidic residues in S2 and S3 were neutralized singly or in pairs to alanine, and the functional effects of extracellular Mg(2+) were characterized in Xenopus oocytes. To modulate deactivation kinetics in HERG, divalent cations interact with eag subfamily-specific acidic residues (D460 and D509) and also with an acidic residue in S2 (D456) that is widely conserved in the voltage-gated channel superfamily. In contrast, the analogous widely-conserved residue does not contribute to the ion-binding site that modulates activation kinetics in eag. We propose that structural differences between the ion-binding sites in the eag and HERG voltage sensors contribute to the differential regulation of activation and deactivation gating in these channels. A previously proposed model for S4 conformational changes during voltagedependent activation can account for the differential regulation of gating seen in eag and HERG.

Mutations associated with failure of raltegravir treatment affect integrase sensitivity to the inhibitor in vitro

Raltegravir (MK-0518) is a potent inhibitor of human immunodeficiency virus (HIV) integrase and is clinically effective against viruses resistant to other classes of antiretroviral agents. However, it can select mutations in the HIV integrase gene. Nine heavily pretreated patients who received salvage therapy including raltegravir and who subsequently developed virological failure under raltegravir therapy were studied. For each patient, the sequences of the integrase-coding region were determined and compared to that at the beginning of the treatment. Four different mutation profiles were identified in these nine patients: E92Q, G140S Q148H, N155H, and E157Q mutations. For four patients, each harboring a different profile, the wild-type and mutated integrases were produced, purified, and assayed in vitro. All the mutations identified altered the activities of integrase protein: both 3' processing and strand transfer activities were moderately affected in the E92Q mutant; strand transfer was markedly impaired in the N155H mutant; both activities were strongly impaired in the G140S Q148H mutant; and the E157Q mutant was almost completely inactive. The sensitivities of wild-type and mutant integrases to raltegravir were compared. The E92Q and G140S Q148H profiles were each associated with a 7- to 8-fold decrease in sensitivity, and the N155H mutant was more than 14-fold less sensitive to raltegravir. At least four genetic profiles (E92Q, G140S Q148H, N155H, and E157Q) can be associated with in vivo treatment failure and resistance to raltegravir. These mutations led to strong impairment of enzymes in vitro in the absence of raltegravir: strand transfer activity was affected, and in some cases 3' processing was also impaired.

A quantum mechanic/molecular mechanic study of the wild-type and N155S mutant HIV-1 integrase complexed with diketo acid

Integrase (IN) is one of the three human immunodeficiency virus type 1 (HIV-1) enzymes essential for effective viral replication. Recently, mutation studies have been reported that have shown that a certain degree of viral resistance to diketo acids (DKAs) appears when some amino acid residues of the IN active site are mutated. Mutations represent a fascinating experimental challenge, and we invite theoretical simulations for the disclosure of still unexplored features of enzyme reactions. The aim of this work is to understand the molecular mechanisms of HIV-1 IN drug resistance, which will be useful for designing anti-HIV inhibitors with unique resistance profiles. In this study, we use molecular dynamics simulations, within the hybrid quantum mechanics/molecular mechanics (QM/MM) approach, to determine the protein-ligand interaction energy for wild-type and N155S mutant HIV-1 IN, both complexed with a DKA. This hybrid methodology has the advantage of the inclusion of quantum effects such as ligand polarization upon binding, which can be very important when highly polarizable groups are embedded in anisotropic environments, for example in metal-containing active sites. Furthermore, an energy terms decomposition analysis was performed to determine contributions of individual residues to the enzyme-inhibitor interactions. The results reveal that there is a strong interaction between the Lys-159, Lys-156, and Asn-155 residues and Mg(2+) cation and the DKA inhibitor. Our calculations show that the binding energy is higher in wild-type than in the N155S mutant, in accordance with the experimental results. The role of the mutated residue has thus been checked as maintaining the structure of the ternary complex formed by the protein, the Mg(2+) cation, and the inhibitor. These results might be useful to design compounds with more interesting anti-HIV-1 IN activity on the basis of its three-dimensional structure.

Broad antiretroviral activity and resistance profile of the novel human immunodeficiency virus integrase inhibitor elvitegravir (JTK-303/GS-9137)

Integrase (IN), an essential enzyme of human immunodeficiency virus (HIV), is an attractive antiretroviral drug target. The antiviral activity and resistance profile in vitro of a novel IN inhibitor, elvitegravir (EVG) (also known as JTK-303/GS-9137), currently being developed for the treatment of HIV-1 infection are described. EVG blocked the integration of HIV-1 cDNA through the inhibition of DNA strand transfer. EVG inhibited the replication of HIV-1, including various subtypes and multiple-drug-resistant clinical isolates, and HIV-2 strains with a 50% effective concentration in the subnanomolar to nanomolar range. EVG-resistant variants were selected in two independent inductions, and a total of 8 amino acid substitutions in the catalytic core domain of IN were observed. Among the observed IN mutations, T66I and E92Q substitutions mainly contributed to EVG resistance. These two primary resistance mutations are located in the active site, and other secondary mutations identified are proximal to these primary mutations. The EVG-selected IN mutations, some of which represent novel IN inhibitor resistance mutations, conferred reduced susceptibility to other IN inhibitors, suggesting that a common mechanism is involved in resistance and potential cross-resistance. The replication capacity of EVG-resistant variants was significantly reduced relative to both wild-type virus and other IN inhibitor-resistant variants selected by L-870,810. EVG and L-870,810 both inhibited the replication of murine leukemia virus and simian immunodeficiency virus, suggesting that IN inhibitors bind to a conformationally conserved region of various retroviral IN enzymes and are an ideal drug for a range of retroviral infections.

Human immunodeficiency virus integrase inhibitors efficiently suppress feline immunodeficiency virus replication in vitro and provide a rationale to redesign antiretroviral treatment for feline AIDS

Background

Treatment of feline immunodeficiency virus (FIV) infection has been hampered by the absence of a specific combination antiretroviral treatment (ART). Integrase strand transfer inhibitors (INSTIs) are emerging as a promising new drug class for HIV-1 treatment, and we evaluated the possibility of inhibiting FIV replication using INSTIs.

Methods

Phylogenetic analysis of lentiviral integrase (IN) sequences was carried out using the PAUP* software. A theoretical three-dimensional structure of the FIV IN catalytic core domain (CCD) was obtained by homology modeling based on a crystal structure of HIV-1 IN CCD. The interaction of the transferred strand of viral DNA with the catalytic cavity of FIV IN was deduced from a crystal structure of a structurally similar transposase complexed with transposable DNA. Molecular docking simulations were conducted using a genetic algorithm (GOLD). Antiviral activity was tested in feline lymphoblastoid MBM cells acutely infected with the FIV Petaluma strain. Circular and total proviral DNA was quantified by real-time PCR.

Results

The calculated INSTI-binding sites were found to be nearly identical in FIV and HIV-1 IN CCDs. The close similarity of primate and feline lentivirus IN CCDs was also supported by phylogenetic analysis. In line with these bioinformatic analyses, FIV replication was efficiently inhibited in acutely infected cell cultures by three investigational INSTIs, designed for HIV-1 and belonging to different classes. Of note, the naphthyridine carboxamide INSTI, L-870,810 displayed an EC₅₀ in the low nanomolar range. Inhibition of FIV integration in situ was shown by real-time PCR experiments that revealed accumulation of circular forms of FIV DNA within cells treated with L-870,810.

Conclusion

We report a drug class (other than nucleosidic reverse transcriptase inhibitors) that is capable of inhibiting FIV replication in vitro. The present study helped establish L-870,810, a compound successfully tested in human clinical trials, as one of the most potent anti-FIV agents ever tested in vitro. This finding may provide new avenues for treating FIV infection and contribute to the development of a small animal model mimicking the effects of ART in humans.

A Quantum Mechanics/Molecular Mechanics Study of the Protein–Ligand Interaction for Inhibitors of HIV-1 Integrase

Human immunodeficiency virus type-1 integrase (HIV-1 IN) is an essential enzyme for effective viral replication. Diketo acids such as L-731,988 and S-1360 are potent and selective inhibitors of HIV-1 IN. In this study, we used molecular dynamics simulations, within the hybrid quantum mechanics/molecular mechanics (QM/MM) approach, to determine the protein-ligand interaction energy between HIV-1 IN and L-731,988 and 10 of its derivatives and analogues. This hybrid methodology has the advantage that it includes quantum effects such as ligand polarisation upon binding, which can be very important when highly polarisable groups are embedded in anisotropic environments, as for example in metal-containing active sites. Furthermore, an energy decomposition analysis was performed to determine the contributions of individual residues to the enzyme-inhibitor interactions on averaged structures obtained from rather extensive conformational sampling. Analysis of the results reveals first that there is a correlation between protein-ligand interaction energy and experimental strand transfer into human chromosomes and secondly that the Asn-155, Lys-156 and Lys-159 residues and the Mg(2+) ion are crucial to anti-HIV IN activity. These results may explain the available experimental data.

Discovery and Synthesis of HIV Integrase Inhibitors: Development of Potent and Orally Bioavailable N-Methyl Pyrimidones

The human immunodeficiency virus type-1 (HIV-1) encodes three enzymes essential for viral replication: a reverse transcriptase, a protease, and an integrase. The latter is responsible for the integration of the viral genome into the human genome and, therefore, represents an attractive target for chemotherapeutic intervention against AIDS. A drug based on this mechanism has not yet been approved. Benzyl-dihydroxypyrimidine-carboxamides were discovered in our laboratories as a novel and metabolically stable class of agents that exhibits potent inhibition of the HIV integrase strand transfer step. Further efforts led to very potent compounds based on the structurally related N-Me pyrimidone scaffold. One of the more interesting compounds in this series is the 2-N-Me-morpholino derivative 27a, which shows a CIC95 of 65 nM in the cell in the presence of serum. The compound has favorable pharmacokinetic properties in three preclinical species and shows no liabilities in several counterscreening assays.

Identification of potential HIV-1 targets of minocycline

Minocycline, a broad spectrum antibiotic, has been discovered to have inhibitory activity against HIV-1 in vitro, but the targets inhibited are unknown. We used a docking with dynamics protocol developed by us to predict the binding affinities of minocycline against seven active sites of five HIV-1 proteins to putatively identify the potential target(s) of minocycline. The results indicate that minocycline has the highest predicted binding affinity against HIV-1 integrase.

Inhibition of human immunodeficiency virus type 1 concerted integration by strand transfer inhibitors which recognize a transient structural intermediate

Human immunodeficiency virus type 1 (HIV-1) integrase (IN) inserts the viral DNA genome into host chromosomes. Here, by native agarose gel electrophoresis, using recombinant IN with a blunt-ended viral DNA substrate, we identified the synaptic complex (SC), a transient early intermediate in the integration pathway. The SC consists of two donor ends juxtaposed by IN noncovalently. The DNA ends within the SC were minimally processed (~15%). In a time-dependent manner, the SC associated with target DNA and progressed to the strand transfer complex (STC), the nucleoprotein product of concerted integration. In the STC, the two viral DNA ends are covalently attached to target and remain associated with IN. The diketo acid inhibitors and their analogs effectively inhibit HIV-1 replication by preventing integration in vivo. Strand transfer inhibitors L-870,810, L-870,812, and L-841,411, at low nM concentrations, effectively inhibited the concerted integration of viral DNA donor in vitro. The inhibitors, in a concentration-dependent manner, bound to IN within the SC and thereby blocked the docking onto target DNA, which thus prevented the formation of the STC. Although 3'-OH recessed donor efficiently formed the STC, reactions proceeding with this substrate exhibited marked resistance to the presence of inhibitor, requiring significantly higher concentrations for effective inhibition of all strand transfer products. These results suggest that binding of inhibitor to the SC occurs prior to, during, or immediately after 3'-OH processing. It follows that the IN-viral DNA complex is "trapped" by the strand transfer inhibitors via a transient intermediate within the cytoplasmic preintegration complex.

Development of integrase inhibitors for treatment of AIDS: An overview

HIV-1 integrase (IN) is an essential enzyme for retroviral replication. It is involved in the integration of HIV DNA into host chromosomal DNA. The unique properties of IN makes it an ideal target for drug design. First, there appears to have no functional equivalent in human cells and the reactions catalyzed by IN are unique. Second, IN is absolutely required for viral replication and mutations in a number of key residues block the viral replication. Third, IN has been validated as a legitimate target and the results from the molecules like S-1,360, JKT-303 which are under phase II/III clinical trials suggest synergistic effect with reverse transcriptase (RT) and protease (PR) inhibitors. During the past 10 years a plethora of inhibitors have been identified and some were shown to be selective against IN and block viral replication. The classes under which inhibitors of integrase can be classified are catechol-containing hydroxylated aromatics, diketoacid-containing aromatics, quninolines and others (non-catechol containing). In the present article we review all the recent small molecules reported to inhibit recombinant HIV-1 IN under these heads. It seems likely that the efficient use of HIV IN as target for rational design can give potent anti-HIV agents, which can be used alone or in combination regimens with other classes of anti-HIV drugs.

Changes to the HIV long terminal repeat and to HIV integrase differentially impact HIV integrase assembly, activity, and the binding of strand transfer inhibitors

Human immunodeficiency virus (HIV) integrase enzyme is required for the integration of viral DNA into the host cell chromosome. Integrase complex assembly and subsequent strand transfer catalysis are mediated by specific interactions between integrase and bases at the end of the viral long terminal repeat (LTR). The strand transfer reaction can be blocked by the action of small molecule inhibitors, thought to bind in the vicinity of the viral LTR termini. This study examines the contributions of the terminal four bases of the nonprocessed strand (G(2)T(1)C(-1)A(-2)) of the HIV LTR on complex assembly, specific strand transfer activity, and inhibitor binding. Base substitutions and abasic replacements at the LTR terminus provided a means to probe the importance of each nucleotide on the different functions. An approach is described wherein the specific strand transfer activity for each integrase/LTR variant is derived by normalizing strand transfer activity to the concentration of active sites. The key findings of this study are as follows. 1) The G(2):C(2) base pair is necessary for efficient assembly of the complex and for maintenance of an active site architecture, which has high affinity for strand transfer inhibitors. 2) Inhibitor-resistant enzymes exhibit greatly increased sensitivity to LTR changes. 3) The strand transfer and inhibitor binding defects of a Q148R mutant are due to a decreased affinity of the complex for magnesium. 4) Gln(148) interacts with G(2), T(1), and C(-1) at the 5' end of the viral LTR, with these four determinants playing important and overlapping roles in assembly, strand transfer catalysis and high affinity inhibitor binding.

Hybrid quantum mechanical/molecular mechanical molecular dynamics simulations of HIV-1 integrase/inhibitor complexes

Human immunodeficiency virus (HIV)-1 integrase (IN) is an attractive target for development of acquired immunodeficiency syndrome chemotherapy. In this study, conventional and coupled quantum mechanical and molecular mechanical (QM/MM) molecular dynamics (MD) simulations of HIV-1 IN complexed with 5CITEP (IN-5CITEP) were carried out. In addition to differences in the bound position of 5CITEP, significant differences at the two levels of theory were observed in the metal coordination geometry and the areas involving residues 116-119 and 140-166. In the conventional MD simulation, the coordination of Mg(2+) was found to be a near-perfect octahedral geometry whereas a distorted octahedral complex was observed in QM/MM. All of the above reasons lead to a different pattern of protein-ligand salt link formation that was not observed in the classical MD simulation. Furthermore to provide a theoretical understanding of inhibition mechanisms of 5CITEP and its derivative (DKA), hybrid QM/MM MD simulations of the two complexes (IN-5CITEP and IN-DKA) have been performed. The results reveal that areas involving residues 60-68, 116-119, and 140-149 were substantially different among the two systems. The two systems show similar pattern of metal coordination geometry, i.e., a distorted octahedron. In IN-DKA, both OD1 and OD2 of Asp-64 coordinate the Mg(2+) in a monodentate fashion whereas only OD1 is chelated to the metal as observed in IN-5CITEP. The high potency of DKA as compared to 5CITEP is supported by a strong salt link formed between its carboxylate moiety and the ammonium group of Lys-159. Detailed comparisons between HIV-1 IN complexed with DKA and with 5CITEP provide information about ligand structure effects on protein-ligand interactions in particular with the Lys-159. This is useful for the design of new selective HIV-1 IN inhibitors.

Treating chemical diversity in QSAR analysis: modeling diverse HIV-1 integrase inhibitors using 4D fingerprints

A set of 213 compounds across 12 structurally diverse classes of HIV-1 integrase inhibitors was used to develop and evaluate a combined clustering and QSAR modeling methodology to construct significant, reliable, and robust models for structurally diverse data sets. The trial-descriptor pool for both clustering- and QSAR-model building consisted of 4D fingerprints and classic QSAR descriptors. Clustering was carried out using a combination of the partitioning around medoids method and divisive hierarchical clustering. QSAR models were constructed for members of each cluster by linear-regression fitting and model optimization using the genetic function approximation. The 12 structurally diverse classes of integrase inhbitors were partitioned into five clusters from which corresponding QSAR models, overwhelmingly composed of 4D fingerprint descriptors, were constructed. Analysis of the five QSAR models suggests that three models correspond to structurally diverse inhibitors that likely bind at a common site on integrase characterized by a common inhibitor hydrogen-bond donor, but involving somewhat different alignments and/or poses for the inhibitors of each of the three clusters. The particular alignments for the inhibitors of each of the three QSAR models involve specific distributions of nonpolar groups over the inhibitors. The two other clusters, one for coumarins and the other for depsides and depsidones, lead to QSAR models with less-defined pharmacophores, likely representing an inhibitor binding to a site(s) different from that of the other nine classes of inhibitors. Overall, the clustering and QSAR methodology employed in this study suggests that it can meaningfully partition structurally diverse compounds expressing a common endpoint in such a manner that leads to statistically significant and pharmacologically insightful composite QSAR models.

Discovery of structurally diverse HIV-1 integrase inhibitors based on a chalcone pharmacophore

Recently, we reported small-molecule chalcones as a novel class of HIV-1 integrase (IN) inhibitors. The most potent compound showed an IC50 value of 2 microM for both IN-mediated 3'-processing and strand transfer reactions. To further utilize the chalcones, we developed pharmacophore models to identify chemical signatures important for biological activity. The derived models were validated with a collection of published inhibitors, and then were applied to screen a subset of our small molecule database. We tested 71 compounds in an in vitro assay specific for IN enzymatic activity. Forty-four compounds showed inhibitory potency<100 microM, and four of them exhibited IC50 values<10 microM. One compound, 62, with an IC50 value of 0.6 microM, displayed better potency than the original chalcone 2 against the strand transfer process. This study demonstrates the systematic use of pharmacophore technologies to discover novel structurally diverse inhibitors based on lead molecules that would exhibit poor characteristics in vivo. The identified compounds have the potential to exhibit favorable pharmacokinetic and pharmacodynamic profiles.

Diketoacid HIV-1 integrase inhibitors: An ab initio study

The stable tautomeric forms of two representative arene-substituted diketoacid HIV-1 integrase inhibitors, 5-ClTEP and L-731,988, were investigated by B3LYP with 6-31G*, 6-31G(d,p), and 6-31+G(d,p) basis sets. Optimization with MP2/6-31G* was also performed for 5-ClTEP. The solvation effect was considered using a conductor-like screening model. With the density functional theory method, the trans diketo conformations are more stable than the cis conformers. The difference is 14 kJ mol(-1) for 5-ClTEP and 33 kJ mol(-1) for L-731,988. Two trans diketo structures were obtained. The difference between these two trans diketo structures is less than 4 kJ mol(-1) calculated at the B3LYP/6-311+G(3df,2p) level. Two enol forms prevail over the diketo tautomers and are calculated to have the same free energy. Because there is no barrier observed between these two enol forms, they can interchange easily such that a delocalized transition state is suggested to be the observed form. Contradictory to the results of the MP2 method that predicts a preference for the trans diketo forms, the B3LYP method predicts a preference for the enol tautomers, which is in agreement with the experimental results.

Benzyl amide-ketoacid inhibitors of HIV-integrase

Integrase is one of three enzymes expressed by HIV and represents a validated target for therapy. Previous reports have demonstrated that the diketoacid-based chemotype is a useful starting point for the design of inhibitors of this enzyme. In this study, one of the ketone groups is replaced by a benzylamide resulting in a new potent chemotype. A preliminary SAR study is carried out to investigate the substitution requirements on the phenyl ring and methylene group of the benzylamide.

High-throughput real-time assay based on molecular beacons for HIV-1 integrase 3'-processing reaction

AIM

To develop a high-throughput real-time assay based on molecular beacons to monitor the integrase 3'-processing reaction in vitro and apply it to inhibitor screening.

METHODS

The recombinant human immunodeficiency virus (HIV)-1 integrase (IN) is incubated with a 38 mer oligonucleotide substrate, a sequence identical to the U5 end of HIV-1 long terminal repeats (LTR). Based on the fluorescence properties of molecular beacons, the substrate is designed to form a stem-loop structure labeled with a fluorophore at the 5' end and a quencher at the 3' end. IN cleaves the terminal 3'-dinucleotide containing the quencher, resulting in an increase in fluorescence which can be monitored on a spectrofluorometer. To optimize this assay, tests were performed to investigate the effects of substrates, enzyme and the metal ion concentrations on the IN activity and optimal parameters were obtained. Moreover, 2 IN inhibitors were employed to test the performance of this assay in antiviral compound screening.

RESULTS

The fluorescent intensity of the reaction mixture varies linearly with time and is proportional to the velocity of the 3'-processing reaction. Tests were performed and the results showed that the optimal rate was obtained for a reaction mixture containing 50 mg/L recombinant HIV-1 IN, 400 nmol/L substrate, and 10 mmol/L Mn(2+). The IN 3'-processing reaction under the optimal conditions showed a more than 18-fold increase in the fluorescence intensity compared to the enzyme-free control. The IC50 values of the IN inhibitors obtained in our assay were similar to the values obtained from a radiolabeled substrate assay.

CONCLUSION

Our results demonstrated that this is a fast, reliable, and sensitive method to monitor HIV IN 3'-processing reaction and that it can be used for inhibitor screening.

Novel HIV integrase inhibitors with anti-HIV activity: insights into integrase inhibition from docking studies

The mechanism of integrase is generally accepted to be dependant on the presence of two divalent metal ions in the active site. However, the only available crystal structures of HIV-1 integrase contain either one or no metal ions, hampering structure-based design studies of integrase inhibitors. For this reason, a two-metal ion model of integrase was constructed. This model was used for computational docking studies with novel diketoacid integrase inhibitors containing pyrimidine nucleobase scaffolds. The docking protocol allowed for some steric contact between the ligand and protein during docking simulations, which implicitly accounted for potential conformational changes in the protein as a result of binding viral DNA or the ligand. The results suggest that the aromatic rings in these diketo acids bind to regions close to the viral DNA and may interfere with mobility of a vital catalytic loop. The docking data also suggest that the ligand can be prevented from adopting a favourable conformation by changes in the relative orientation of its diketo side-chain and aromatic rings. The docked pose of each of the active compounds coordinated both of the metal ions present in the active site of integrase through the diketo acid functionality of these compounds. This result is more consistent with theoretical data on inhibitor mechanism, and thus recommends this docking approach over rigid use of one-metal ion models derived from current crystal structures of integrase.

Role of integrase inhibitors in the treatment of HIV disease

The introduction of highly active antiretroviral therapy (HAART) has produced a dramatic reduction in HIV-related mortality and morbidity among populations with widespread access to drugs. However, the increase in mutated HIV strains with reduced susceptibility to antiretroviral agents and the emergence of HAART-related side effects make it necessary to develop novel compounds characterized by activity against resistant viruses, a high genetic barrier to resistance and favorable pharmacokinetic and toxicity profiles. Integrase is a key enzyme in the life cycle of HIV and has represented an appealing target of antiretroviral therapy for several years. In 2006, after more than a decade of advances, pitfalls and disappointments, large clinical trials with integrase inhibitors in HIV-positive subjects have eventually begun.

In-Silico docking of HIV-1 integrase inhibitors reveals a novel drug type acting on an enzyme/DNA reaction intermediate

Background

HIV-1 integrase (IN) is an emerging drug target, as IN strand transfer inhibitors (INSTIs) are proving potent antiretroviral agents in clinical trials. One credible theory sees INSTIs as docking at the cellular (acceptor) DNA-binding site after IN forms a transitional complex with viral (donor) DNA. However, mapping of the DNA and INSTI binding sites within the IN catalytic core domain (CCD) has been uncertain.

Methods

Structural superimpositions were conducted using the SWISS PDB and Cn3D free software. Docking simulations of INSTIs were run by a widely validated genetic algorithm (GOLD).

Results

Structural superimpositions suggested that a two-metal model for HIV-1 IN CCD in complex with small molecule, 1-(5-chloroindol-3-yl)-3-(tetrazoyl)-1,3-propandione-ene (5CITEP) could be used as a surrogate for an IN/viral DNA complex, because it allowed replication of contacts documented biochemically in viral DNA/IN complexes or displayed by a crystal structure of the IN-related enzyme Tn5 transposase in complex with transposable DNA. Docking simulations showed that the fitness of different compounds for the catalytic cavity of the IN/5CITEP complex significantly (P < 0.01) correlated with their 50% inhibitory concentrations (IC₅₀s) in strand transfer assays in vitro. The amino acids involved in inhibitor binding matched those involved in drug resistance. Both metal binding and occupation of the putative viral DNA binding site by 5CITEP appeared to be important for optimal drug/ligand interactions. The docking site of INSTIs appeared to overlap with a putative acceptor DNA binding region adjacent to but distinct from the putative donor DNA binding site, and homologous to the nucleic acid binding site of RNAse H. Of note, some INSTIs such as 4,5-dihydroxypyrimidine carboxamides/N-Alkyl-5-hydroxypyrimidinone carboxamides, a highly promising drug class including raltegravir/MK-0518 (now in clinical trials), displayed interactions with IN reminiscent of those displayed by fungal molecules from Fusarium sp., shown in the 1990s to inhibit HIV-1 integration.

Conclusion

The 3D model presented here supports the idea that INSTIs dock at the putative acceptor DNA-binding site in a IN/viral DNA complex. This mechanism of enzyme inhibition, likely to be exploited by some natural products, might disclose future strategies for inhibition of nucleic acid-manipulating enzymes.

A novel diketo phosphonic acid that exhibits specific, strand-transfer inhibition of HIV integrase and anti-HIV activity

We have synthesized novel phosphonic acid analogues of beta-diketo acids. Interestingly, the phosphonic acid isostere, 2, of our anti-HIV compound, 1, was an inhibitor of only the strand transfer step, in stark contrast to 1. Compound 2 had lower anti-HIV activity than 1, but was more active and less toxic than the phosphonic acid analogue of L-708906. These isosteric compounds represent the first examples of beta-diketo phosphonic acids of structural, synthetic, and antiviral interest.

Target recognition by catechols and beta-ketoenols: potential contribution of hydrogen bonding and Mn/Mg chelation to HIV-1 integrase inhibition

Catechol and beta-ketoenol are important pharmacophores of HIV-1 integrase (IN) inhibitors. We investigated their recognition of the divalent metals, Mg and Mn, and of hydrogen bond donors (HBD) and acceptors (HBA). We used data retrieved from the Cambridge Structural Database (CSD), applying a 3-D structure-based, in silico-driven approach. We found that both biophores were stabilized by intramolecular H-bonding (IHB), which was weak in catechols and very strong in beta-ketoenols. Catechols tended to recognize environmental HBD and HBA, demonstrating their ability to make use of both hydroxyl groups to form multiple, strong intermolecular H-bonds. In contrast, beta-ketoenols stabilized by strong IHB inefficiently formed intermolecular H-bonds. beta-Ketoenolate chelated both Mg and Mn ions much more efficiently than dioxolene, which was highly selective for Mn cations. The significant differences in the ability of these two pharmacophores to bind HBD and HBA and in their ability to chelate Mg and Mn have important consequences for competitive inhibitor binding and selectivity for metals and integrase DNA-binding sites.

Binding modes of two highly potent and nontoxic inhibitors of HIV-1 integrase

The complex structures of Human Immunodeficiency Virus Type 1 (HIV-1) integrase binding two highly potent and nontoxic inhibitors, lithospermic acid (M/sub 5/22) and lithospermic acid B (M/sub 5/32), were obtained using docking calculations. Docking results provided detailed information of their binding modes. The binding sites of M/sub 5/22 and M/sub 5/32 were similar to the inhibitor 5-CITEP. The lowest docking energies for HIV-1 integrase binding M/sub 5/22 and M/sub 5/32 are in agreement with their corresponding lower IC/sub 50/ values. Our results on the chemical structure difference between M/sub 5/22 and M/sub 5/32 show that the carboxyl and hydroxyl groups on the side-chain of M/sub 5/32 are important chemical groups which could help to increase the effect against HIV-1 IN replication.

Discovery of small-molecule HIV-1 fusion and integrase inhibitors oleuropein and hydroxytyrosol: part II. integrase inhibition

We report molecular modeling and functional confirmation of Ole and HT binding to HIV-1 integrase. Docking simulations identified two binding regions for Ole within the integrase active site. Region I encompasses the conserved D64-D116-E152 motif, while region II involves the flexible loop region formed by amino acid residues 140-149. HT, on the other hand, binds to region II. Both Ole and HT exhibit favorable interactions with important amino acid residues through strong H-bonding and van der Waals contacts, predicting integrase inhibition. To test and confirm modeling predictions, we examined the effect of Ole and HT on HIV-1 integrase activities including 3'-processing, strand transfer, and disintegration. Ole and HT exhibit dose-dependent inhibition on all three activities, with EC(50)s in the nanomolar range. These studies demonstrate that molecular modeling of target-ligand interaction coupled with structural-activity analysis should facilitate the design and identification of innovative integrase inhibitors and other therapeutics.

Quantitative structure–activity relationship studies of HIV-1 integrase inhibition. 1. GETAWAY descriptors

The GEometry, Topology, and Atom-Weights AssemblY (GETAWAY) approach has been applied to the study of the HIV-1 integrase inhibition of 172 compounds that belong to 11 different chemistry families. A model able to describe more than 68.5% of the variance in the experimental activity was developed with the use of the mentioned approach. In contrast, none of the five different approaches, including the use of Randić Molecular Profiles, Geometrical, RDF, 3D-MORSE and WHIM descriptors was able to explain more than 62.4% of the variance in the mentioned property with the same number of variables in the equation. Finally, after extracting five compounds considered by us as outliers the model was able to describe more than 72.5% of the variance in the experimental activity.

HIV integrase inhibitors as therapeutic agents in AIDS

HIV-1 integrase is a protein of Mr 32 000 encoded at the 3'-end of the pol gene. Integration of HIV DNA into the host cell chromosomal DNA apparently occurs by a carefully defined sequence of DNA tailoring (3'-processing (3'P)) and coupling (integration) reactions. Integration of HIV DNA into human DNA represents the biochemical completion of the invasion of the human cell (e.g., T-cell) by HIV. Unlike major successes seen in the development of clinically approved anti-HIV agents against HIV reverse transcriptase and HIV protease, there are no FDA-approved anti-HIV drugs in clinical use where the mechanism of action is inhibition of HIV integrase. This review summarises some key advances in the area of integrase inhibitors with the major focus being on new generation inhibitors. Special emphasis is placed on diketo acids with aromatic and heteroaromatic moieties, diketo acids with nucleobase scaffolds, bis-diketo acids, functionalised naphthyridines and other isosteres of diketo acids. Data pertaining to integrase inhibition and in vitro anti-HIV activity are discussed. Mention is made of drugs in clinical trials, both past (S-1360, L-870,810 and L-870,812 and present (GS-9137 and MK-0518). Other promising drugs, including those from the authors' laboratory, are referred. Resistant mutants arising from key integrase inhibitors and cross-resistance are indicated.

Probing HIV-1 integrase inhibitor binding sites with position-specific integrase-DNA cross-linking assays

HIV-1 integrase binds site-specifically to the ends of the viral cDNA. We used two HIV-1 integrase-DNA cross-linking assays to probe the binding sites of integrase inhibitors from different chemical families and with different strand transfer selectivities. The disulfide assay probes cross-linking between the integrase residue 148 and the 5'-terminal cytosine of the viral cDNA, and the Schiff base assay probes cross-linking between an integrase lysine residue and an abasic site placed at selected positions in the viral cDNA. Cross-linking interference by eight integrase inhibitors shows that the most potent cross-linking inhibitors are 3'-processing inhibitors, indicating that cross-linking assays probe the donor viral cDNA (donor binding site). In contrast, strand transfer-selective inhibitors provide weak cross-linking interference, consistent with their binding to a specific acceptor (cellular DNA) site. Docking and crystal structure studies illustrate specific integrase-inhibitor contacts that prevent cross-linking formation. Four inhibitors that prevented Schiff base cross-linking to the conserved 3'-terminal adenine position were examined for inhibition at various positions within the terminal 21 bases of the viral cDNA. Two of them selectively inhibited upper strand cross-linking, whereas the other two had a more global effect on integrase-DNA binding. These findings have implications for elucidating inhibitor binding sites and mechanisms of action. The cross-linking assays also provide clues to the molecular interactions between integrase and the viral cDNA.