A new FRET-based fluorescent probe: Colorimetric and ratiometric detection of hypochlorite and anti-counterfeiting applications

Hypochlorite (ClO-), as the main component of widely used disinfectants in daily life, comes into closer contact with the human body, which can lead to a number of diseases. The high-performance method is increasingly needed to detect ClO- in our daily life. In this report, we successfully synthesized a FRET ratiometric fluorescent probe (NDAC) containing benzoxadiazole moieties and coumarin moieties bound via ethylenediamine. As expected, NDAC has excellent selectivity and anti-interference ability toward ClO-, and the ratio of fluorescence intensity (I471 nm/I533 nm) has a very good linear relationship with the concentration of ClO-, with a wide linear range (2.5-1750 μM) and low detection limit (0.887 μM). Furthermore, we have successfully applied it for the quantitative detection of ClO- in water samples in daily life. At the same time, there is a very clear change in the fluorescence color after the reaction of the NDAC with ClO-. The blue/green value (B/G) of this color change also shows a very good linear relationship to ClO- (5.0-1000 μM). Therefore, the NDAC has also been successfully used for test strip detection and quantitative detection of ClO- in actual samples through smartphone-based fluorescence image analysis, and this method can provide faster, more convenient and more accessible detection. In addition, NDAC sensors also have potential applications in the field of information anti-counterfeiting.

Facile green spectrophotometric approaches for the determination of three natural edible antioxidant polyphenols in different matrices

The combination of Curcumin (CRN), resveratrol (RSV), and quercetin (QRN) has significant antioxidant effects and is found to be more effective than a single polyphenol. Spectrophotometric methods are considered one of the most common analytical techniques for the determination of the drugs due to their sensitivity, rapidness, low cost, and reproducibility. Therefore, the presence of new, and simple methods for the determination of such compounds will be highly valuable, specially in the presence of spectral overlap. In this research, five different facile spectrophotometric methods were investigated for the simultaneous determination of that ternary mixture for the first time, including zero order (I), first derivative (II), ratio difference double divisor (III), first derivative ratio spectra (IV), and mean centering (V) methods. The designed approaches were linear over the concentration ranges of (1.0-10.0), (0.5-8.0), and (1.0-14.0) μg/mL, respectively for curcumin, resveratrol, and quercetin. The different methods were then validated as stated by the International Council of Harmonization. The accuracy and precision have been evaluated by statistical analysis including student t-test, variance ratio F-test, and ANOVA. Moreover, the greenness and whiteness of the proposed methods were assessed to ensure the adherence to the greenness characters.

High-throughput fluorescence sensing array based on tetraphenylethylene derivatives for detecting and distinguishing pathogenic microbes

Infections induced by pathogenic microorganisms will bring negative effects such as diseases that damage health and result in heavy economic burden. Therefore, it is very important to detect and identify the pathogens in time. Moreover, traditional clinical diagnosis or food testing often faces the problem of dealing with a large number of samples. Here, we designed a high-throughput fluorescent sensor array based on the different binding ability of five tetraphenylethylene derivatives (TPEs) with various side chains to different kinds of pathogenic microbes, which is used to detect and distinguish various species, so as to realize rapid mass diagnosis, and hopefully provide guidance for further determination of microbial infections and clinical treatment.

Well designed iridium-phosphinite complexes: Biological assays, electrochemical behavior and density functional theory calculations

Mononuclear phosphinite Iridium complexes based on ferrocene group have been prepared and characterized by various spectroscopic techniques. The complexes were subjected to cyclic voltammetry studies in order to determine the energies of HOMO and LUMO levels and to estimate their electrochemical and some electronic properties. Organic complex-based memory substrates were immobilized using TiO2-modified ITO electrodes, and the memory functions of phosphinite-based organic complexes were verified by chronoamperometry (CA) and open-circuit potential amperometry (OCPA). Extensive theoretical and experimental investigations were directed to gain a more profound understanding of the chemical descriptors and the diverse electronic transitions taking place within the iridium complexes, as well as their electrochemical characteristics. The quantum chemical calculations were carried out for the iridium complexes at the DFT/CAM-B3LYP level of theory in the gas phase. Furthermore, the antioxidant, antimicrobial, DNA binding, and DNA cleavage activities of the complexes were tested. Complex 2 exhibited the highest radical scavenging activity (67.5 ± 2.24 %) at 200.0 mg/L concentration. It was observed that the complexes formed an inhibition zone in the range of 8-15 mm against Gram + bacteria and in the range of 0-13 mm against Gram - bacteria. The agarose gel electrophoresis method was used to determine the DNA binding and DNA cleavage activities of the complexes. All of the tested complexes had DNA binding activity; however, complexes 1, 2, and 8 showed better binding activity than the others.

A near-infrared fluorescent probe with thiadiazole unit as key skeleton for ICT and ESIPT mechanism and effective detection of Cu2

Fluorescent probe L-I was synthesized to demonstrate that 1,3,4-thiadiazole is an attractive moiety and could be utilized as positive hydrogen bond acceptor for excited state intramolecular proton transfer (ESIPT) processes, guider of electrons movement for intramolecular charge transfer (ICT) process and identify group for mental ions. Furthermore, dicyanoisophorone framework was employed to improve the fluorescence characteristics and near-infrared (NIR) fluorescent emission at 695 nm accompanied by a Stoke's shift as large as 260 nm was obtained. L-I could selectively detect Cu2+ over other analytes taking advantages of high sensitivity, fast response within 30 s and low detection limit (0.026 μM). More important, L-I exhibited good performance for detection of Cu2+ in actual water samples, food products, traditional Chinese medicine and for cell imaging which demonstrates practical significance in the fields of environmental monitor, food safety and biotechnology.

Carbon dots-based dual-emission ratiometric fluorescent sensors for fluorescence and visual detection of hypochlorite and Cu2

Carbon dots (CDs) with blue emission were synthesized by solvothermal method using hydroquinone and 5-aminoisphthalic acid as precursors. The strong oxidation of ClO- caused the fluorescence quenching of CDs at 405 nm, and synchronously generated a new emission peak at 500 nm. Furthermore, upon the addition of Cu2+ to CDs-ClO- system, the green fluorescence at 500 nm was quenched, while the blue emission at 405 nm remained unchanged, due to the complexation between Cu2+ and the amino group on the CDs surface. Meanwhile, the fluorescence color of system changed from blue to bright green and then to dark blue by sequentially increasing the concentrations of ClO- and Cu2+. The fluorescence signal of F500/F405 exhibited a linear relationship with the concentration of ClO- and Cu2+ in a certain range, respectively. Thus, a ratiometric fluorescence sensor based on the obtained CDs were developed to sequentially detect ClO- and Cu2+ with detection limits of 0.40 μM and 0.31 μM, respectively. Additionally, the CDs were mixed with polyvinyl alcohol hydrogel to form test strips, which were successfully used for visual detection of ClO- and Cu2+. Satisfactory results were also obtained in the analysis of ClO- and Cu2+ in actual water samples.

Quantitative analysis of four PAHs in oily sludge by surface-enhanced Raman spectroscopy (SERS) combined with partial least squares regression (PLS) based on a novel nano-silver-silicon coupling substrate

Polycyclic aromatic hydrocarbons (PAHs) present in oily sludge generated by the petroleum and petrochemical industries have emerged as a prominent concern within the realm of environmental conservation. The precise determination of PAHs holds immense significance in both petroleum geochemistry and environmental protection. In this study, a combination of surface-enhanced Raman spectroscopy (SERS) and solid-liquid extraction was employed for the screening of PAHs in oily sludge. Methanol was utilized as the extraction solvent for PAHs, while nanosilver-silicon coupling substrates were employed for their detection. The SERS spectrum was acquired using a portable Raman spectrometer. The nano silver-silicon coupling substrate exhibits excellent uniformity, with relative standard deviations (RSDs) of Phenanthrene, Fluoranthrene, Fluorene and Naphthalene (Phe, Flt, Flu and Nap) being 2.8%, 1.08%, 1.41%, and 5.44% respectively. Moreover, the limits of detection (LODs) achieved remarkable values of 0.542 μg/g, 0.342 μg/g, 0.541 μg/g, and 5.132 μg/g. The quantitative analysis of PAHs in oily sludge was investigated using SERS technology combined with partial least squares (PLS). The optimal PLS calibration model was optimized by combining spectral preprocessing methods and using the SiPLS (Synergy interval partial least squares)-VIP (Variable Importance in Projection) hybrid variable selection strategy. The prediction performance of the D1st (First derivative)-WT (Wavelet transform)-SiPLS-VIP-PLS model was deemed satisfactory, as evidenced by high R2P values of 0.9851, 0.9917, and 0.9925 for Phe, Flt, and Flu respectively; additionally, the corresponding MREP values were found to be 0.0580, 0.0668, and 0.0669 respectively. However, for Nap analysis, the D1st-WT-PLS model proved to be a better calibration model with an R2P value of 0.9864 and an MREP (Mean relative error of prediction) value of 0.0713. In summary, SERS technology combined with PLS based on different spectral pretreatment methods and mixed variable selection strategies is a promising method for quantitative analysis of PAHs in oily sludge, which will provide new ideas and methods for the quantitative analysis of PAHs in oily sludge.

Comprehensive investigations of four ratiometric fluorescent chemosensors based on 4-(1H-imidazol-2-yl)benzaldehyde skeleton for malononitrile detection

Malononitrile is a very important chemical material and has wide application fields in production of medicines, pesticides, and extraction of gold. However, its nonnegligible hypertoxicity inspired researchers to develop more efficient analysis techniques to sensitively and selectively detect malononitrile. Nopinone derivatives initiated by our research group have been developed as a class of organic fluorescent chemosensors for identifying multiple analytes in recent years. Different heterocyclic compounds based on nopinone were designed and synthesized to be applied in the fields of environmental analysis, food detection and bioimaging. Nevertheless, the comparison research on the optical properties of fluorescent compounds containing the nopinyl matrix with other structural analogs including alkyl, cyclohexyl and phenyl groups was deficient. Herein, four 4-(1H-imidazol-2-yl)benzaldehyde-based ratiometric fluorescent chemosensors based on o-dimethyl cyclohexyl, phenyl and nopinyl units for recognizing malononitrile were designed and developed, and their differences in the optical properties and detection performances were investigated by using spectral analysis combined with theoretical calculations. Moreover, the nopinone-based 4-(1H-imidazol-2-yl)benzaldehyde fluorescent chemosensor NMZQ was successfully applied in the dual channel fluorescence bioimaging of malononitrile in living HeLa cells and zebrafish, which attributed to its outstanding spectral property and detection performance.

Highly-Selective fluorescent Fe3O4@PPy aptasensor

Label-free nucleic acid fluorescent probes are gaining popularity due to their low cost and ease of application. However, the primary challenges associated with label-free fluorescent probes stem from their tendency to interact with other biomolecules, such as RNA, proteins, and enzymes, which results in low specificity. In this work, we have developed a simple detection platform that utilizes Fe3O4@PPy in combination with a label-free nucleic acid probe, 1,1,2,2-tetrakis[4-(2-bromo-ethoxy)phenyl]ethene (TTAPE) or Malachite Green (MG), for highly selective detection of metal ions, acetamiprid, and thrombin. Fe3O4@PPy not only adsorbs aptamers through electrostatic interactions, π-π bonding, and hydrogen bonding, but also quenches the fluorescence of the TTAPE/MG. Upon the addition of target compounds, the aptasensor separates from Fe3O4@PPy through magnetic separation. Moreover, by changing different aptamers, the aptasensor was applied to detect metal ions, acetamiprid, and thrombin, with the turned-on photoluminescence (PL) emission intensity recorded and showing linearity to the concentrations of targets. The robustness of method was demonstrated by applying it to real samples, which included vegetables (for detecting acetamiprid with LODs of 0.02 and 0.04 ng/L), serum samples (for detecting thrombin with LODs of 5.5 and 4.3 nM), and water samples (for detecting Pb2+ with an LOD of 0.17 nM). Therefore, due to its impressive selectivity and sensitivity, the Fe3O4@PPy aptasensor could be utilized as a universal detection platform for various clinical and environmental applications.

Exploring the nanoscale: AFM-IR visualization of cysteine adsorption on gold nanoparticles

This study focuses on the adsorption process of L-cysteine (Cys), a sulfur-containing amino acid, onto monolayers of gold nanoparticles (AuNPs) prepared through distinct protocols on mica substrates. Two types of AuNPs were prepared using two different methods: the first employed a physical approach, which combined the Inert Gas Condensation (IGC) technique with the magnetron sputtering method, while the second utilized a chemical method involving the reduction of tetrachloroauric acid with trisodium citrate (TC). The characterization of AuNPs was performed using transmission electron microscopy (TEM) and atomic force microscopy (AFM), of up to 5 ± 1.3 nm for bare AuNPs obtained through vacuum techniques, and up to 12 ± 5 nm for negatively charged, citrate-stabilized TCAuNPs(-). The application of spectroscopic techniques based on the surface-enhanced effects allows for describing the adsorption process in both micro- and nanoscale systems: Cys/bare AuNPs and Cys/ TCAuNPs(-). The commonly used surface-enhanced Raman spectroscopy (SERS) technique provided insights into adsorption behaviours at the microscale level. In the case of TCAuNPs(-), an interaction involving the lone electron pair of sulfur (S) atom and metal surface, while on the bare AuNPs, S is adsorbed on the surface, but the cleavage of the SH group is not discernible. Nanoscale analysis was complemented using AFM combined with the surface-enhanced infrared absorption spectroscopy (AFM-SEIRA) technique. AFM-SEIRA map indicated the formation of hot spot which were predominantly located between aggregated TCAuNPs(-) and on specific NPs surfaces (area between NPs and gold-coated tip). Results from the SERS and AFM-SEIRA techniques were in good agreement, underscoring the comprehensive understanding achieved through the chosen experimental approach regarding the Cys interactions with layers of AuNPs.

Stable, porous, light-emitting post-modification covalent organic frameworks conjugated molecularly imprinted polymers for selective detection of pyrraline in salami products

Molecular imprinting is one of the most frequently occurring post-modification in the preparation of covalent organic frameworks (COFs) to enhance selectivity and specificity. In this study, we prepared a 2D layer structure of methoxy-conjugated COFs with the modification of azide (4-azido-L-phenylalanine), named [4-ALP]0.17-COFs, which exhibited a large specific surface area of 827.6 m2/g, good stability of water, polar solvents, chemistry, and thermodynamics. Fluorescent COF nanosheets ([4-ALP]0.17-CONs) obtained by liquid-assisted ultrasonic stripping have excellent blue luminescence properties and ultra-high absolute fluorescence quantum yield of 33.34 %. The modifiable functional groups in the surface of [4-ALP]0.17-CONs interacted with the targets and functional monomers of molecularly imprinted polymers (MIPs) through hydrogen bonding interactions, to form the 3D holes with recognition sites. The quantitative detection of pyrraline (PRL) could be achieved in the concentration range of 0.05-4 μg/L with the LOD was 34.81 ng/L. The spiked recovery of PRL in meat products was 88.01-106.00 %. The [4-ALP]0.17-CONs@MIPs sensing system showed excellent stability, reliability, reusability, and practicability, promising its potential for targeted monitoring of trace molecules in real matrices.

Multi-stimuli-responsive cyanostilbene derivatives: Their fluorescent and mechanochromic properties, and potential application in water sensing and anti-counterfeiting

In recent years, aggregation-induced emission luminogens (AIEgens) have witnessed numerous groundbreaking advances in fundamental theoretical research and functional applications. Notably, stimuli-responsive AIEgens have achieved remarkable results, demonstrating immense potential for application in various fields such as chemistry, materials science, biology, and medicine. Herein, two multi-stimuli-responsive cyanostilbene derivatives TPE-CNTPA and PH-CNTPA were synthesized by introducing tetraphenylethylene (TPE) and trifluoromethyl groups, respectively. Primarily, under the combined mechanism of aggregation-induced emission (AIE) and twisted intramolecular charge transfer (TICT), TPE-CNTPA and PH-CNTPA exhibit "on-off-on" fluorescent emission characteristics in solution. Secondly, under 365 nm ultraviolet light irradiation, the photo-induced isomerization of PH-CNTPA causes changes in photophysical property, demonstrating its responsiveness to ultraviolet light. In addition, TPE-CNTPA and PH-CNTPA exhibit high-contrast mechanochromic properties, providing broader possibilities for their potential applications in various fields. Moreover, owing to the unique fluorescence emission characteristics, TPE-CNTPA and PH-CNTP have enormous potential for application in the field of encryption anti-counterfeiting. Besides, PH-CNTPA can be utilized for the detection of trace water in single or mixed solvents, demonstrating outstanding sensitivity and anti-interference properties in different solvents. This research work reveals the potential in the fields of water sensing and anti-counterfeiting for these two multi-stimuli-responsive compounds.

A highly sensitive and selective fluorescent "on-off-on" peptide-based probe for sequential detection of Hg2+ and S2- ions: Applications in living cells and zebrafish imaging

Mercury ions (Hg2+) and sulfur ions (S2-), have caused serious harm to the ecological environment and human health as two kinds of highly toxic pollutants widely used. Therefore, the visual quantitative determination of Hg2+ and S2- is of great significance in the field of environmental monitoring and medical therapy. In this study, a novel fluorescent "on-off-on" peptide-based probe DNC was designed and synthesized using dipeptide (Asn-Cys-NH2) as the raw material via solid phase peptide synthesis (SPPS) technology with Fmoc chemistry. DNC displayed high selectivity in the recognition of Hg2+, and formed non-fluorescence complex (DNC-Hg2+) through 2:1 binding mode. Notably, DNC-Hg2+ complex generated in situ was used as relay response probe for highly selective sequential detection of S2- through reversible formation-separation. DNC achieved highly sensitive detection of Hg2+ and S2- with the detection limits (LODs) of 8.4 nM and 5.5 nM, respectively. Meanwhile, DNC demonstrated feasibility for Hg2+ and S2- detections in two water samples, and the considerable recovery rate was obtained. More importantly, DNC showed excellent water solubility and low toxicity, and was successfully used for consecutive discerning Hg2+ and S2- in test strips, living cells and zebrafish larvae. As an effective visual analysis method in the field, smartphone RGB Color Picker APP realized semi-quantitative detections of Hg2+ and S2- without the need for complicated device.

Simple cyclic chalcone dye with multiple optical functions: Piezochromism and lysosomes staining

Both artificially synthesized and naturally occurring cyclic chalcones have been widely studied for their excellent biological activities. However, research on its photophysical properties is still limited. In the present study, we designed and synthesized a small molecule fluorescent dye based on the ICT effect, using dimethylamino as the electron-donating group and carbonyl as the electron withdrawing group, and investigated its photophysical properties in depth. Although YB is a simple small molecule, it exhibits significant piezochromic properties. The fluorescence of YB can change from green to yellow through grinding. After solvent fumigation, the fluorescence reverts to green. Furthermore, YB was used successfully in the lysosomal targeting. This study expands the research on the photophysical properties of cyclic chalcone and give richness to application of cyclic chalcone compounds.

p38 MAPK inhibitor SB202190 suppresses ferroptosis in the glutamate-induced retinal excitotoxicity glaucoma model

JOURNAL/nrgr/04.03/01300535-202410000-00031/figure1/v/2024-02-06T055622Z/r/image-tiff Glutamate excitotoxicity has been shown to play an important role in glaucoma, and glutamate can induce ferroptosis. The p38 mitogen-activated protein kinase (MAPK) pathway inhibitor SB202190 has a potential ability to suppress ferroptosis, and its downstream targets, such as p53, have been shown to be associated with ferroptosis. However, whether ferroptosis also occurs in retinal ganglion cells in response to glutamate excitotoxicity and whether inhibition of ferroptosis reduces the loss of retinal ganglion cells induced by glutamate excitotoxicity remain unclear. This study investigated ferroptosis in a glutamate-induced glaucoma rat model and explored the effects and molecular mechanisms of SB202190 on retinal ganglion cells. A glutamate-induced excitotoxicity model in R28 cells and an N-methyl-D-aspartate-induced glaucoma model in rats were used. In vitro experiments showed that glutamate induced the accumulation of iron and lipid peroxide and morphological changes of mitochondria in R28 cells, and SB202190 inhibited these changes. Glutamate induced the levels of p-p38 MAPK/p38 MAPK and SAT1 and decreased the expression levels of ferritin light chain, SLC7A11, and GPX4. SB202190 inhibited the expression of iron death-related proteins induced by glutamate. In vivo experiments showed that SB202190 attenuated N-methyl-D-aspartate-induced damage to rat retinal ganglion cells and improved visual function. These results suggest that SB202190 can inhibit ferroptosis and protect retinal ganglion cells by regulating ferritin light chain, SAT1, and SLC7A11/Gpx4 pathways and may represent a potential retina protectant.

Effects of zeolite imidazole frameworks on rice seedlings (Oryza sativa L.): Phytotoxicity, transformation, and bioaccumulation

Zeolite imidazole frameworks (ZIFs), a class of the metal organic framework, have been extensively studied in environmental applications. However, their environmental fate and potential ecological impact on plants remain unknown. Here, we investigated the phytotoxicity, transformation, and bioaccumulation processes of two typical ZIFs (ZIF-8 and ZIF-67) in rice (Oryza sativa L.) under hydroponic conditions. ZIF-8 and ZIF-67 in the concentration of 50 mg/L decreased root and shoot dry weight maximally by 55.2% and 27.5%, 53.5% and 37.5%, respectively. The scanning electron microscopy (SEM) imaging combined with X-ray diffraction (XRD) patterns revealed that ZIFs on the root surface gradually collapsed and transformed into nanosheets with increasing cultivation time. The fluorescein isothiocyanate (FITC) labeled ZIFs were applied to trace the uptake and translocation of ZIFs in rice. The results demonstrated that the transformed ZIFs were mainly distributed in the intercellular spaces of rice root, while they cannot be transported to culms and leaves. Even so, the Co and Zn contents of rice roots and shoots in the ZIFs treated groups were increased by 1145% and 1259%, 145% and 259%, respectively, compared with the control groups. These findings suggested that the phytotoxicity of ZIFs are primarily attributed to the transformed ZIFs and to a less extent, the metal ions and their ligands, and they were internalized by rice root and increased the Co and Zn contents of shoots. This study reported the transformation of ZIFs and their biological effectiveness in rice, highlighting the potential environmental hazards and risks of ZIFs to crop plants.

High performance supercapacitors deploying cube-templated tracheid cavities of wood-derived carbon

Wood-derived carbon, with its strong tracheid array structure, is an ideal material for use as a self-supporting electrode in supercapacitors. By leveraging the inherent through pore structure and surface affinity found in wood tracheids, we successfully engineered a highly spatially efficient cube-templated porous carbon framework inside carbonized wood tracheid cavities through precise control over precursor crystallization temperatures. This innovative cubic channel architecture effectively maximizes up to (79 ± 1)% of the cavity volume in wood-derived carbon while demonstrating exceptional hydrophilicity and high conductivity properties, facilitating the development of supercapacitors with enhanced areal/volumetric capacitances (2.65F cm-2/53.0F cm-3 at 5.0 mA cm-2) as well as superior areal/volumetric energy densities (0.37 mWh cm-2/7.36 mWh cm-3 at 2.5 mW cm-2). The fabrication of these cube-templated channels with high cube filling content is not only simple and precisely controllable, but also environmentally friendly. The proposed method eliminates the conventional acid-base treatment process for pore formation, facilitating the rapid development and practical implementation of thick electrodes with superior performance in supercapacitors. Moreover, it offers a universal research approach for the commercialization of wood-derived thick electrodes.

Pd(II) coordination molecule modified g-C3N4 for boosting photocatalytic hydrogen production

The photocatalytic H2 production activity of polymer carbon nitride (g-C3N4) is limited by the rapid recombination of photoelectron-hole pairs and slow surface reduction dynamic process. Here, a supramolecular complex (named R-TAP-Pd(II)) was fabricated via self-assembly of (R)-N-(1-phenylethyl)-4-(4-(pyridin-2-yl)-1H-1,2,3-triazol-1-yl)benzamide (R-TAP) with Pd(II) and used to modify g-C3N4. In the R-TAP-Pd(II)@g-C3N4 composite photocatalyst, the spin polarization of R-TAP-Pd(II) can promote charge transfer and inhibit photogenerated carrier recombination, as confirmed by spectral tests and photoelectrochemical performance tests. Electrochemical tests and in situ X-ray photoelectron spectroscopy (XPS) tests proved that the Pd(II) ion in the R-TAP-Pd(II) molecule can serve as active sites to accelerate H2 production. The R-TAP-Pd(II)@g-C3N4 presented a photocatalytic H2 generation rate of 1085 μmol g-1 h-1 when exposed to visible light, which was a about 278-fold increase compared with g-C3N4. This work finds a new approach to boost the photocatalytic efficiency of g-C3N4 via supramolecular self-assembly.

Strong, anti-swelling, and biodegradable seaweed-based straws with surface mineralized CaCO3 armor

While the extensive utilization of disposable plastic straws has resulted in significant environmental issues such as microplastics and soil and ocean pollution, the quest for alternative straws for versatile use remains a formidable challenge. Here, drawing inspiration from naturally water-resistant materials such as bones and sea urchins, we have developed seaweed-based straws with significantly improved water resistance and mechanical strength via in-situ mineralization of CaCO3 on their surfaces. Specifically, the COO- groups on the G (α-L-guluronate) blocks of alginate were employed to establish a robust cross-linked network, while the COO- groups on the M (β-D-mannuronate) blocks attracted free Ca2+ through electrostatic forces, thereby promoting CaCO3 nucleation. This effectively prevents COOH groups from hydrating, reducing swelling, and results in the fabrication of nano- to micron-sized CaCO3 particles that reinforce the structure without compromising the cross-linked network. Compared with the control group, the S5% sample (prepared with 5 % Na2CO3 solution) exhibited a 102 % increase in water contact angle, a 35 % decrease in swelling degree, and a 35.5 % and 37.5 % increase in ultimate flexural and tensile stress, respectively. Furthermore, the potential use of these straws as a waste for heavy metal adsorption was investigated, addressing environmental concerns while demonstrating economic feasibility.

The structural, antioxidant and emulsifying properties of cellulose nanofiber-dihydromyricetin mixtures: Effects of composite ratio

In this work, effects of cellulose nanofiber/dihydromyricetin (CNF/DMY) ratio on the structural, antioxidant and emulsifying properties of the CNF/DMY mixtures were investigated. CNF integrated with DMY via hydrogen bonding and the antioxidant capacity of mixtures increased with decreasing CNF/DMY ratio (k). The oxidative stability of emulsions enhanced as the DMY content increased. Emulsions formed at Φ = 0.5 displayed larger size (about 25 μm), better viscoelasticity and centrifugal stability than those at Φ = 0.3 (about 23 μm). The emulsions at k = 17:3 and Φ = 0.5 exhibited the most excellent viscoelasticity. In conclusion, the DMY content in mixtures and the oil phase fraction exhibited distinct synergistic effects on the formation and characteristics of emulsions, and the emulsions could demonstrate superior oxidative and storage stability. These findings could provide a novel strategy to extend the shelf life of cellulose-based emulsions and related products.

Reversal of electrophysiological and behavioral deficits mediated by 5-HT7 receptor upregulation following LP-211 treatment in an autistic-like rat model induced by prenatal valproic acid exposure

Autism spectrum disorder (ASD) is a neurodevelopmental disorder characterized by alterations and imbalances in multiple brain neurochemical systems, particularly the serotonergic neurotransmission. This includes changes in serotonin (5-HT) levels, aberrations in 5-HT transporter activity, and decreased synthesis and expression of 5-HT receptors (5-HT7Rs). The exact role of the brain 5-HT system in the development of ASD remains unclear, with conflicting evidence on its involvement. Recently, we have reported research has shown a significant decrease in serotonergic neurons originating from the raphe nuclei and projecting to the CA1 region of the dorsal hippocampus in autistic-like rats. Additionally, we have shown that chronic activation of 5-HT7Rs reverses the effects of autism induction on synaptic plasticity. However, the functional significance of 5-HT7Rs at the cellular level is still not fully understood. This study presents new evidence indicating an upregulation of 5-HT7R in the CA1 subregion of the hippocampus following the induction of autism. The present account also demonstrates that activation of 5-HT7R with its agonist LP-211 can reverse electrophysiological abnormalities in hippocampal pyramidal neurons in a rat model of autism induced by prenatal exposure to VPA. Additionally, in vivo administration of LP-211 resulted in improvements in motor coordination, novel object recognition, and a reduction in stereotypic behaviors in autistic-like offspring. The findings suggest that dysregulated expression of 5-HT7Rs may play a role in the pathophysiology of ASD, and that agonists like LP-211 could potentially be explored as a pharmacological treatment for autism spectrum disorder.

Ebullition dominates methane emissions in stratified coastal waters

Coastal areas are an important source of methane (CH4). However, the exact origins of CH4 in the surface waters of coastal regions, which in turn drive sea-air emissions, remain uncertain. To gain a comprehensive understanding of the current and future climate change feedbacks, it is crucial to identify these CH4 sources and processes that regulate its formation and oxidation. This study investigated coastal CH4 dynamics by comparing water column data from six stations located in the brackish Tvärminne Archipelago, Baltic Sea. The sediment biogeochemistry and microbiology were further investigated at two stations (i.e., nearshore and offshore). These stations differed in terms of stratification, bottom water redox conditions, and organic matter loading. At the nearshore station, CH4 diffusion from the sediment into the water column was negligible, because nearly all CH4 was oxidized within the upper sediment column before reaching the sediment surface. On the other hand, at the offshore station, there was significant benthic diffusion of CH4, albeit the majority underwent oxidation before reaching the sediment-water interface, due to shoaling of the sulfate methane transition zone (SMTZ). The potential contribution of CH4 production in the water column was evaluated and was found to be negligible. After examining the isotopic signatures of δ13C-CH4 across the sediment and water column, it became apparent that the surface water δ13C-CH4 values observed in areas with thermal stratification could not be explained by diffusion, advective fluxes, nor production in the water column. In fact, these values bore a remarkable resemblance to those detected below the SMTZ. This supports the hypothesis that the source of CH4 in surface waters is more likely to originate from ebullition than diffusion in stratified brackish coastal systems.

Seasonal quantification of the inter-city transport of PM2.5 in the Yangtze River Delta region of China based on a source-oriented chemical transport model and the Michaelis-Menten equation

Regional transport plays a crucial role in the pollution of fine particulate matter (PM2.5) over the Yangtze River Delta region (YRD). A practical joint regional emission control strategy requires quantitative assessment of the contribution of regional transport. In this study, the contribution of inter-city transport to PM2.5 among the 41 cities in the YRD region were quantitatively estimated using a source-oriented chemical transport model, and then the relationship between the cumulative contribution of regional transport and the distance was examined using the Michaelis-Menten equation. The results show that the Michaelis-Menten equation is suitable to represent the relationship between the cumulative contribution and transport distance. The coefficient of determination (r2) of the fittings is greater than 0.9 in 71 % of the cases in the six subregions and four seasons in YRD. Two key parameters in the Michaelis-Menten eq. K1, indicating the maximum contribution of regional transport, and K2, indicating the distance to which the regional transport contribution reach half the maximum contribution, show substantial regional and seasonal variations. The average K1 is 73.6 %, with lower values observed in the northern part of the YRD and higher values in central Jiangsu. K2 is larger in northern Jiangsu, as well as central and southern Zhejiang. The local contribution in autumn and winter is lower than that in spring and summer in the northern part of the YRD. Particularly in northern Jiangsu, the local contribution reaches 90.4 % in summer but drops to 53.0 % in autumn and winter, illustrating significant impacts of regional transport to PM2.5 in autumn and winter in this area. K2 is larger on polluted days, compared to clean days, indicating greater contributions from regional transport to PM2.5 in YRD. The results can serve as a scientific foundation for implementing regional joint prevention and control measures in the YRD region.

DNA tetrahedral scaffold-corbelled self-feedback circuit for dual-mode ratiometric biosensing with Ru@COF-LZU1 accelerator

Sensitive, reliable, and specific detection of microRNAs (miRNAs) is a key objective for disease diagnosis and prognosis. Here, a ratiometric fluorescent/electrochemiluminescent (FL/ECL) sensor was designed for the dual-mode detection of miRNA-122, a hepatocellular carcinoma biomarker. The strong ECL emission was achieved from imine-linked covalent organic framework (COF-LZU1) accelerator enriched Ru(bpy)32+ molecules (Ru@COF-LZU1), which was applied as a delimited reaction micro-reactor to enhance ECL emission. Impressively, to construct an efficient sensing platform, self-feedback circuit was grafted at the vertex of DNA tetrahedral scaffold (DTS), which could provide a solution-phase-like environment and transform miRNA-122 into abundant single-stranded DNAs on the disposable electrode. Simultaneously, the carboxyfluorescein (FAM) tagged DNA segment was cleaved and released into the reaction solution, bringing in the recovery of FL response (FL on). Finally, the introduction of glucose oxidase (GOD) could generate H2O2 by in situ catalyzing GOD to glucose, resulting in the decrease of ECL signal (ECL off). Relying on FL/ECL ratio value, miRNA-122 was quantified with high sensitivity, well selectivity, stability and favorable practicability, suggesting that the proposed biosensor hold great potential for clinical diagnosis.

Advanced biomedical and electronic dual-function skin patch created through microfluidic-regulated 3D bioprinting

Artificial skin involves multidisciplinary efforts, including materials science, biology, medicine, and tissue engineering. Recent studies have aimed at creating skins that are multifunctional, intelligent, and capable of regenerating tissue. In this work, we present a specialized 3D printing ink composed of polyurethane and bioactive glass (PU-BG) and prepare dual-function skin patch by microfluidic-regulated 3D bioprinting (MRBP) technique. The MRBP endows the skin patch with a highly controlled microstructure and superior strength. Besides, an asymmetric tri-layer is further constructed, which promotes cell attachment and growth through a dual transport mechanism based on hydrogen bonds and gradient structure from hydrophilic to superhydrophilic. More importantly, by combining the features of biomedical skin with electronic skin (e-skin), we achieved a biomedical and electronic dual-function skin patch. In vivo experiments have shown that this skin patch can enhance hemostasis, resist bacterial growth, stimulate the regeneration of blood vessels, and accelerate the healing process. Meanwhile, it also mimics the sensory functions of natural skin to realize signal detection, where the sensitivity reached up to 5.87 kPa-1, as well as cyclic stability (over 500 cycles), a wide detection range of 0-150 kPa, high pressure resolution of 0.1 % under the pressure of 100 kPa. This work offers a versatile and effective method for creating dual-function skin patches and provide new insights into wound healing and tissue repair, which have significant implications for clinical applications.

Spontaneous nanotube formation of an asymmetric glycolipid

Over the past decades, advances in lipid nanotechnology have shown that self-assembled lipid structures providing ease of preparation, chemical stability, and biocompatibility represent a landmark on the development of multidisciplinary technologies. Lipid nanotubes (LNTs) are a unique class of lipid self-assembled structures, bearing unique properties such as high-aspect ratio, tunable diameter size, and precise molecular recognition. They can be obtained either by the action of external factors to already formed vesicles or spontaneously, the latter depending strongly on subtle molecular features. Here, we report on the spontaneous formation of supported lipid nanotubes of a particular type of glycolipid, ohmline, whose hydrophobic core displays remarkable asymmetry. The combination of bulk and surface-sensitive techniques indicates that below its main transition, ohmline displays an interdigitated gel phase, likely driven by the unique asymmetry in its hydrophobic core. Enhanced order packing by interdigitation favors the formation of ohmline nanotubes in agreement with chiral-based models of nanotube formation. The findings presented in this work call for additional studies to link lipid molecular structure-assembly relationships, whose understanding is relevant for the controlled design of lipid nanotubes networks in particular and controlled design of soft-matter nanomaterials in general.

Optically responsive dry cholesteric liquid crystal marbles

Dry liquid crystal marbles are structures that consist of cholesteric liquid crystal (CLC) droplets prepared by the mixture of chiral-doped thermotropic LCs encapsulated by cellulose nanocrystals (CNCs) that have been dried under ambient conditions. The characterizations revealed that CLC droplets were successfully encapsulated by self-standing CNC shells and responsive to the external gaseous stimulus. The dry LC marbles offer several advantages over previously reported LC-based gas sensors, such as fast response against minor external stimuli, and ease of handling, which make them particularly attractive for practical applications in sensing. We demonstrate the use of these marbles for detecting toluene vapor, a common industrial solvent and pollutant, which we also use to understand the response characteristics. The dry CLC marbles exhibit a significant response to toluene vapor with a detection limit below 500 ppm, attributed to the change of pitch size of the helical structure of CLC droplets induced by the toluene vapor. The CNC-capsulated CLC droplets were stable in emulsion for up to two weeks, and their dried form exhibited a sensitive response upon toluene exposure. The real-time experiments revealed that the LC marbles can be used multiple times without a significant loss of sensitivity, where 90 % of the maximum response was observed at 13.3 ± 4.7 s. These dry LC marbles can also be utilized in other areas, including drug delivery, optical devices, and biosensors.

S-nitrosoproteomics profiling elucidates the regulatory mechanism of S-nitrosylation on beef quality

This study aimed to quantitively profile the S-nitrosylation in beef semimembranosus (SM) with different treatments (nitric oxide donor or nitric oxide synthase inhibitor) by applying iodoTMT-based nitrosoproteomics. Results showed that 2096 S-nitrosylated cysteine sites in 368 proteins were detected in beef SM. Besides, differential SNO-modified proteins were screened, some of which were involved in crucial biochemical pathways, including calcium-releasing-related proteins, energy metabolic enzymes, myofibrils, and cytoskeletal proteins. GO analysis indicated that differential proteins were localized in a wide range of cellular compartments, such as cytoplasm, organelle, and mitochondrion, providing a prerequisite for S-nitrosylation exerting broad roles in post-mortem muscles. Furthermore, KEGG analysis validated that these proteins participated in the regulation of diverse post-mortem metabolic processes, especially glycolysis. To conclude, changes of S-nitrosylation levels in post-mortem muscles could impact the structure and function of crucial muscle proteins, which lead to different levels of muscle metabolism and ultimately affect beef quality.

Industrial-Si-based photoanode for highly efficient and stable water splitting

Photoelectrochemical (PEC) water splitting is an effective and sustainable method for solar energy harvesting. However, the technology is still far away from practical application because of the high cost and low efficiency. Here, we report a low-cost, stable and high-performing industrial-Si-based photoanode (n-Indus-Si/Co-2mA-xs) that is fabricated by simple electrodeposition. Systematic characterizations such as scanning electron microscopy, X-ray photoelectron spectroscopy have been employed to characterize and understand the working mechanisms of this photoanode. The uniform and adherent dispersion of co-catalyst particles result in high built-in electric field, reduced charge transfer resistance, and abundant active sites. The core-shell structure of co-catalyst particles is formed after the activation process. The reconstructed morphology and modified chemical states of the surface co-catalyst particles improve the separation and transfer of charges, and the reaction kinetics for water oxidation greatly. Our work demonstrates that large-scale PEC water splitting can be achieved by engineering the industrial-Si-based photoelectrode, which shall guide the development of solar energy conversion in the industry.

Novel pH- and thermal-responsive oleogel capsules: Featuring an oleogel core and ultrathin calcium-alginate shell

Oleogels have been explored as a new lipid-based delivery system, however, their insolubility and unsuitable shape severely limit their application in food systems. Herein, core-shell oleogel capsules with high monodispersity (coefficient variation (CV) < 5%)) were prepared via gravity-assisted co-flowing microfluidic device and simply air-drying. The oleogel capsules with oleogel core and ultrathin calcium-alginate shell were prepared. Oleogel capsules maintained their original shape at pH = 2.0 but swelled rapidly at pH = 6.8 and 7.4. The swelling ratio of shell can be adjusted by inner fluid flow rate (Qin). Notably, the core with beeswax (BW) crystal network, effectively improved the stability performances and also could provide thermal response. Finally, the oleogel capsules demonstrated excellent sustained release and UV protection of lipophilic bioactives. This work sheds light on development of novel oleogel capsules, making them ideal candidates for smart food encapsulation applications.

Inhibition effect of p-d orbital hybridized PtSn nanozymes for colorimetric sensor array of antioxidants

Rational design of peroxidase (POD)-like nanozymes with high activity and specificity still faces a great challenge. Besides, the investigations of nanozymes inhibitors commonly focus on inhibition efficiency, the interaction between nanozymes-involved catalytic reactions and inhibitors is rarely reported. In this work, we design a p-block metal Sn-doped Pt (p-d/PtSn) nanozymes with the selective enhancement of POD-like activity. The p-d orbital hybridization interaction between Pt and Sn can effectively optimize the electronic structure of PtSn nanozymes and thus selectively enhance POD-like activity. In addition, the antioxidants as nanozymes inhibitors can effectively inhibit the POD-like activity of p-d/PtSn nanozymes, which results in the fact that antioxidants absorbed on the p-d/PtSn surface can hinder the adsorption of hydrogen peroxide. The inhibition type (glutathione as a model molecule) is reversible mixed-inhibition with inhibition constants (Ki' and Ki) of 0.21 mM and 0.03 mM. Finally, based on the varying inhibition levels of antioxidant molecules, a colorimetric sensor array is constructed to distinguish and simultaneously detect five antioxidants. This work is expected to design highly active and specific nanozymes through p-d orbital hybrid engineering, and also provides insights into the interaction between nanozymes and inhibitors.

A cavity induced mode hybridization plasmonic sensor for portable detection of exosomes

Exosomes have been considered as promising biomarkers for cancer diagnosis due to their abundant information from originating cells. However, sensitive and reliable detection of exosomes is still facing technically challenges due to the lack of a sensing platform with high sensitivity and reproducibility. To address the challenges, here we propose a portable surface plasmon resonance (SPR) sensing of exosomes with a three-layer Au mirror/SiO2 spacer/Au nanohole sensor, fabricated by an economical polystyrene nanosphere self-assembly method. The SiO2 spacer can act as an optical cavity and induce mode hybridization, leading to excellent optimization of both sensitivity and full width at half maximum compared with normal single layer Au nanohole sensors. When modified with CD63 or EpCAM aptamers, a detection of limit (LOD) of as low as 600 particles/μL was achieved. The sensors showed good capability to distinguish between non-tumor derived L02 exosomes and tumor derived HepG2 exosomes. Additionally, high reproducibility was also achieved in detection of artificial serum samples with RSD as low as 2%, making it feasible for clinical applications. This mode hybridization plasmonic sensor provides an effective approach to optimize the detection sensitivity of exosomes, pushing SPR sensing one step further towards cancer diagnosis.

Long-term spatial distribution and implication of black and brown carbon in the Tibetan Plateau

Black carbon (BC) and brown carbon (BrC) over the high-altitude Tibetan Plateau (TP) can significantly influence regional and global climate change as well as glacial melting. However, obtaining plateau-scale in situ observations is challenging due to its high altitude. By integrating reanalysis data with on-site measurements, the spatial distribution of BC and BrC can be accurately estimated using the random forest algorithm (RF). In our study, the on-site observations of BC and BrC were successively conducted at four sites from 2018 to 2021. Ground-level BC and BrC concentrations were then obtained at a spatial resolution of 0.25° × 0.25° for three periods (including Periods-1980, 2000, and 2020) using RF and multi-source data. The highest annual concentrations of BC (1363.9 ± 338.7 ng/m3) and BrC (372.1 ± 96.2 ng/m3) were observed during Period-2000. BC contributed a dominant proportion of carbonaceous aerosol, with concentrations 3-4 times higher than those of BrC across the three periods. The ratios of BrC to BC decreased from Period-1980 to Period-2020, indicating the increasing importance of BC over the TP. Spatial distributions of plateau-scale BC and BrC concentrations showed heightened levels in the southeastern TP, particularly during Period-2000. These findings significantly enhance our understanding of the spatio-temporal distribution of light-absorbing carbonaceous aerosol over the TP.

Automated machine learning-aided prediction and interpretation of gaseous by-products from the hydrothermal liquefaction of biomass

Hydrothermal liquefaction (HTL) is a thermochemical conversion technology that produces bio-oil from wet biomass without drying. However, by-product gases will inevitably be produced, and their formation is unclear. Therefore, an automated machine learning (AutoML) approach, automatically training without human intervention, was used to aid in predicting gaseous production and interpreting the formation mechanisms of four gases (CO2, CH4, CO, and H2). Specifically, four accurate optimal single-target models based on AutoML were developed with elemental compositions and HTL conditions as inputs for four gases. Herein, the gradient boosting machine (GBM) performed excellently with train R2 ≥ 0.99 and test R2 ≥ 0.80. Then, the screened GBM algorithm-based ML multi-target models (maximum average test R2 = 0.89 and RMSE = 0.39) were built to predict four gases simultaneously. Results indicated that biomass carbon, solid content, pressure, and biomass hydrogen were the top four factors for gas production from HTL of biomass. This study proposed an AutoML-aided prediction and interpretation framework, which could provide new insight for rapid prediction and revelation of gaseous compositions from the HTL process.

Tissue engineering approaches for dental pulp regeneration: The development of novel bioactive materials using pharmacological epigenetic inhibitors

The drive for minimally invasive endodontic treatment strategies has shifted focus from technically complex and destructive root canal treatments towards more conservative vital pulp treatment. However, novel approaches to maintaining dental pulp vitality after disease or trauma will require the development of innovative, biologically-driven regenerative medicine strategies. For example, cell-homing and cell-based therapies have recently been developed in vitro and trialled in preclinical models to study dental pulp regeneration. These approaches utilise natural and synthetic scaffolds that can deliver a range of bioactive pharmacological epigenetic modulators (HDACis, DNMTis, and ncRNAs), which are cost-effective and easily applied to stimulate pulp tissue regrowth. Unfortunately, many biological factors hinder the clinical development of regenerative therapies, including a lack of blood supply and poor infection control in the necrotic root canal system. Additional challenges include a need for clinically relevant models and manufacturing challenges such as scalability, cost concerns, and regulatory issues. This review will describe the current state of bioactive-biomaterial/scaffold-based engineering strategies to stimulate dentine-pulp regeneration, explicitly focusing on epigenetic modulators and therapeutic pharmacological inhibition. It will highlight the components of dental pulp regenerative approaches, describe their current limitations, and offer suggestions for the effective translation of novel epigenetic-laden bioactive materials for innovative therapeutics.

Wet tissue adhesive polymeric powder hydrogels for skeletal muscle regeneration

Volumetric muscle loss (VML) frequently results from traumatic incidents and can lead to severe functional disabilities. Hydrogels have been widely employed for VML tissue regeneration, which are unfortunately ineffective because of the lack of intimate contact with injured tissue for structural and mechanical support. Adhesive hydrogels allow for strong tissue connections for wound closure. Nevertheless, conventional adhesive hydrogels exhibit poor tissue adhesion in moist, bleeding wounds due to the hydration layer at the tissue-hydrogel interfaces, resulting in insufficient performance. In this study, we developed a novel, biocompatible, wet tissue adhesive powder hydrogel consisting of dextran-aldehyde (dex-ald) and gelatin for the regeneration of VML. This powder absorbs the interfacial tissue fluid and buffer solution on the tissue, spontaneously forms a hydrogel, and strongly adheres to the tissue via various molecular interactions, including the Schiff base reaction. In particular, the powder composition with a 1:4 ratio of dex-ald to gelatin exhibited optimal characteristics with an appropriate gelation time (258 s), strong tissue adhesion (14.5 kPa), and stability. Dex-ald/gelatin powder hydrogels presented strong adhesion to various organs and excellent hemostasis compared to other wet hydrogels and fibrin glue. A mouse VML injury model revealed that the dex-ald/gelatin powder hydrogel significantly improved muscle regeneration, reduced fibrosis, enhanced vascularization, and decreased inflammation. Consequently, our wet-adhesive powder hydrogel can serve as an effective platform for repairing various tissues, including the heart, muscle, and nerve tissues.

Noninvasive ROS imaging and drug delivery monitoring in the tumor microenvironment

Reactive oxygen species (ROS) that are overproduced in certain tumors can be considered an indicator of oxidative stress levels in the tissue. Here, we report a magnetic resonance imaging (MRI)-based probe capable of detecting ROS levels in the tumor microenvironment (TME) using ROS-responsive manganese ion (Mn2+)-chelated, biotinylated bilirubin nanoparticles (Mn@bt-BRNPs). These nanoparticles are disrupted in the presence of ROS, resulting in the release of free Mn2+, which induces T1-weighted MRI signal enhancement. Mn@BRNPs show more rapid and greater MRI signal enhancement in high ROS-producing A549 lung carcinoma cells compared with low ROS-producing DU145 prostate cancer cells. A pseudo three-compartment model devised for the ROS-reactive MRI probe enables mapping of the distribution and concentration of ROS within the tumor. Furthermore, doxorubicin-loaded, cancer-targeting ligand biotin-conjugated Dox/Mn@bt-BRNPs show considerable accumulation in A549 tumors and also effectively inhibit tumor growth without causing body weight loss, suggesting their usefulness as a new theranostic agent. Collectively, these findings suggest that Mn@bt-BRNPs could be used as an imaging probe capable of detecting ROS levels and monitoring drug delivery in the TME with potential applicability to other inflammatory diseases.

Boosting the Zn2+ storage capacity of MoO3 nanoribbons by modulating the electrons spin states of Mo via Ni doping

Aqueous zinc-ion batteries (AZIBs) have received considerable potential for their affordability and high reliability. Among potential cathodes, α-MoO3 stands out due to its layered structure aligned with the (010) plane, offering extensive ionic insertion channels for enhanced charge storage. However, its limited electrochemical activity and poor Zn2+ transport kinetics present significant challenges for its deployment in energy storage devices. To overcome these limitations, we introduce a new strategy by doping α-MoO3 with Ni (Ni-MoO3), tuning the electron spin states of Mo. Thus modification can activate the reactivity of Ni-MoO3 towards Zn2+ storage and weaken the interaction between Ni-MoO3 and intercalated Zn2+, thereby accelerating the Zn2+ transport and storage. Consequently, the electrochemical properties of Ni-MoO3 significantly surpass those of pure MoO3, demonstrating a specific capacity of 258 mAh g-1 at 1 A g-1 and outstanding rate performance (120 mAh g-1 at 10 A g-1). After 1000 cycles at 8 A g-1, it retains 76 % of the initial capacity, with an energy density of 154.4 Wh kg-1 and a power density of 11.2 kW kg-1. This work proves that the modulation of electron spin states in cathode materials via metal ion doping can effectively boost their capacity and cycling durability.

Portable smartphone-based RecJf exonuclease-modulated enhanced ratiometric fluorescence bioplatform for rapid visual detection of As3

Arsenite (As3+), a highly carcinogenic heavy metal ion and widely distributed in nature, can have serious health implications even with minimal exposure. Herein, a portable smartphone device-based ratiometric fluorescence platform was established for sensitive detection of As3+. The work relied on the use of metal-organic framework-tagged cDNA (PCN-224-cDNA), with high adsorption capability and fluorescence properties, as an internal reference to quench the fluorescence of FAM-anchored aptamer (FAM-Apt) via hybridization. In the presence of As3+, FAM-Apt specifically bound to As3+ leading to conformational changes, which detached from the PCN-224-cDNA surface. Interestingly, a smartphone-based readout equipment engineered using a 3D-printed hardware device administered the portable detection of As3+. The limit of detection (LOD) for the proposed ratiometric biosensor was calculated to be 0.021 ng/mL, significantly below WHO's safety threshold. Hence, it demonstrates significant potential for large-scale screening of As3+ residues in food and the environment.

Automation of 3D digital rolling circle amplification using a 3D-printed liquid handler

Automation of liquid handling is indispensable to improve throughput and reproducibility in biochemical assays. However, the incorporation of automated systems into laboratory workflows is often hindered by the high cost and complexity associated with building robotic liquid handlers. Here, we report a 3D-printed liquid handler based on a fluidic manifold, thereby obviating the need for complex robotic mechanisms. The fluidic manifold, termed a dispensing and aspirating (DA) device, comprises parallelized multi-pipette structures connected by distribution and aspiration channels, enabling the precise supply and removal of reagents, respectively. Leveraging the versatility of 3D printing, the DA device can be custom-designed and printed to fit specific applications. As a proof-of-principle, we engineered a 3D-printed liquid handler dedicated for 3D digital rolling circle amplification (4DRCA), an advanced biochemical assay involving multiple sample preparation steps such as antibody incubation, cell fixation, nucleic acid amplification, probe hybridization, and extensive washing. We demonstrate the efficacy of the 3D-printed liquid handler to automate the preparation of clinical samples for the simultaneous, in situ analysis of oncogenic protein and transcript markers in B-cell acute lymphoblastic leukemia cells using 4DRCA. This approach provides an effective and accessible solution for liquid handling automation, offering high throughput and reproducibility in biochemical assays.

Recent advances in soft, implantable electronics for dynamic organs

Unlike conventional rigid counterparts, soft and stretchable electronics forms crack- or defect-free conformal interfaces with biological tissues, enabling precise and reliable interventions in diagnosis and treatment of human diseases. Intrinsically soft and elastic materials, and device designs of innovative configurations and structures leads to the emergence of such features, particularly, the mechanical compliance provides seamless integration into continuous movements and deformations of dynamic organs such as the bladder and heart, without disrupting natural physiological functions. This review introduces the development of soft, implantable electronics tailored for dynamic organs, covering various materials, mechanical design strategies, and representative applications for the bladder and heart, and concludes with insights into future directions toward clinically relevant tools.

Purification of recombinantly produced somatostatin-28 comparing hydrochloric acid and polyethyleneimine as E. coli extraction aids

Peptides are used for diagnostics, therapeutics, and as antimicrobial agents. Most peptides are produced by chemical synthesis, but recombinant production has recently become an attractive alternative due to the advantages of high titers, less toxic waste and correct folding of tertiary structure. Somatostatin-28 is a peptide hormone that regulates the endocrine system, cell proliferation and inhibits the release of numerous secondary hormones in human body. It is composed of 28 amino acids and has one disulfide bond, which makes it to an optimal model peptide for a whole downstream purification process. We produced the peptide in the periplasm of E. coli using the CASPON™ technology, an affinity fusion technology system that enables high soluble expression of recombinant proteins and cleaves the fusion tag with a circularly permuted human caspase-2. Furthermore, purification of the products is straight forward using an established platform process. Two different case studies for downstream purification are presented, starting with either hydrochloric acid or polyethyleneimine as an extraction aid. After release of affinity-tagged somatostatin-28 out of E. coli's periplasm, several purification steps were performed, delivering a pure peptide solution after the final polishing step. The process was monitored by reversed-phase high-performance liquid chromatography as well as mass spectrometry to determine the yield and correct disulfide bond formation. Monitoring of impurities like host cell proteins, DNA and endotoxins after each downstream unit confirmed effective removal for both purification pathways.

Bibliometric analysis and systematic review of electrochemical methods for environmental remediation

Electrochemical methods are increasingly favored for remediating polluted environments due to their environmental compatibility and reagent-saving features. However, a comprehensive understanding of recent progress, mechanisms, and trends in these methods is currently lacking. Web of Science (WoS) databases were utilized for searching the primary data to understand the knowledge structure and research trends of publications on electrochemical methods and to unveil certain hotspots and future trends of electrochemical methods research. The original data were sampled from 9080 publications in those databases with the search deadline of June 1st, 2022. CiteSpace and VOSviewer software facilitated data visualization and analysis of document quantities, source journals, institutions, authors, and keywords. We discussed principles, influencing factors, and progress related to seven major electrochemical methods. Notably, publications on this subject have experienced significant growth since 2007. The most frequently-investigated areas in electrochemical methods included novel materials development, heavy metal remediation, organic pollutant degradation, and removal mechanism identification. "Advanced oxidation process" and "Nanocomposite" are currently trending topics. The major remediation mechanisms are adsorption, oxidation, and reduction. The efficiency of electrochemical systems is influenced by material properties, system configuration, electron transfer efficiency, and power density. Electro-Fenton exhibits significant advantages in achieving synergistic effects of anodic oxidation and electro-adsorption among the seven techniques. Future research should prioritize the improvement of electron transfer efficiency, the optimization of electrode materials, the exploration of emerging technology coupling, and the reduction in system operation and maintenance costs.

Using an amphiphilic diblock copolymer to understand the shear-induced structural transformation of bicontinuous microemulsions

HYPOTHESIS

Amphiphilic diblock copolymers are known to increase the surfactant's efficiency to stabilize microemulsion, leading to higher structural order and monolayer rigidity. We thus seek to evaluate whether the addition of such polymers alters the shear behavior of bicontinuous microemulsions, in particular, their shear transformation towards lamellar structures.

EXPERIMENTS

We examine the initial structure and shear response of bicontinuous /n-octane//PEP5-b-PEO5 microemulsions by coupling microfluidics with small-angle neutron scattering (SANS), attaining wall shear rates in excess of . The azimuthal analysis of the obtained 2D scattering patterns allows us to follow their structural transformation by means of the degree of anisotropy.

FINDINGS

The amphiphilic diblock copolymer promotes the shear-induced transformation of bicontinuous microemulsions, resulting in up to ∼ higher degrees of anisotropy than for corresponding polymer-free microemulsions. The increased shear response observed with increasing polymer content is rationalized by combining the influence of domain size and viscosity with the stability limits of the bicontinuous microemulsion in the isothermal phase diagram. As a result, a consistent description of the degree of anisotropy is obtained, enabling the prediction of the shear-induced bicontinuous-to-lamellar transformation.

Multi-scale analysis of the chemical and physical pollution evolution process from pre-co-pollution day to PM2.5 and O3 co-pollution day

PM2.5 and O3 are two of the main air pollutants that have adverse impacts on climate and human health. The evolution process of PM2.5 and O3 co-pollution are of concern because of the increased frequency of PM2.5 and O3 co-pollution days. Here, we examined the chemical coupling and revealed the driving factors of the PM2.5 and O3 co-pollution evolution process from cleaning day, PM2.5 pollution day, or O3 pollution day, applied by theoretical analysis and model calculation methods. The results demonstrate that PM2.5 and O3 co-pollution day frequently occurred with high concentrations of gaseous precursors and higher sulfur oxidation ratio (SOR) and nitrogen oxidation ratio (NOR), which we attribute to the enhancement of atmospheric oxidation capacity (AOC). The AOC is positively correlated with O3 and weakly correlated with PM2.5. In addition, we found that the correlation coefficients of PM2.5-NO2 (0.62) were higher than that of PM2.5-SO2 (0.32), highlighting the priority of NOx controlling to mitigate PM2.5 pollution. Overall, our discovery can provide scientific evidence to design feasible solutions for the controlling PM2.5 and O3 co-pollution process.

Fabrication of superior laccase-mimicking enzyme with catalytic oxidative and photothermal properties for anti-bacterial and dual-mode glutathione S-transferase monitoring

A novel laccase mimic enzyme Cu-Mn with excellent photothermal properties was firstly prepared via a combination of hydrothermal and in situ synthesis. Cu-Mn nanozymes could catalyze the typical laccase substrate 2,4-dichlorophenol (2,4-DP) to generate the red quinone imine. Further, loading the MnO2 nanosheets with photothermal properties, Cu-Mn nanozymes possessed not only excellent laccase catalytic activity, but also high photothermal conversion efficiency. The presence of glutathione S-transferase (GST) recovered the glutathione (GSH)-induced weakness of the laccase activity and photothermal properties of Cu-Mn. Hence, a GST enzyme-regulated dual-mode sensing strategy was established based on Cu-Mn nanozymes. The detection limits of GST monitoring based on colorimetric and photothermal methods were 0.092 and 0.087 U/L with response times of 20 min and 8 min, respectively. Furthermore, the proposed method enabled the measuring of GST levels in human serum and was successfully employed in the primary evaluation of hepatitis patients. Another attraction, the impressive photothermal behavior also endowed the Cu-Mn nanozymes with promising antimicrobial properties, which exhibited significant antimicrobial effects against Escherichia coli (E.coli) and Staphylococcus aureus (S.aureus). Unsurprisingly, multifunctional Cu-Mn nanozymes certainly explore new paths in biochemical analysis and antimicrobial applications.

Multifunctional nanomaterials for smart wearable diabetic healthcare devices

Wearable diabetic healthcare devices have attracted great attention for real-time continuous glucose monitoring (CGM) using biofluids such as tears, sweat, saliva, and interstitial fluid via noninvasive ways. In response to the escalating global demand for CGM, these devices enable proactive management and intervention of diabetic patients with incorporated drug delivery systems (DDSs). In this context, multifunctional nanomaterials can trigger the development of innovative sensing and management platforms to facilitate real-time selective glucose monitoring with remarkable sensitivity, on-demand drug delivery, and wireless power and data transmission. The seamless integration into wearable devices ensures patient's compliance. This comprehensive review evaluates the multifaceted roles of these materials in wearable diabetic healthcare devices, comparing their glucose sensing capabilities with conventionally available glucometers and CGM devices, and finally outlines the merits, limitations, and prospects of these devices. This review would serve as a valuable resource, elucidating the intricate functions of nanomaterials for the successful development of advanced wearable devices in diabetes management.

Colloidal carbon soot templated TiO2/Ag surface functionalized 3D printed metal brushes as new generation surface enhanced Raman scattering substrates

This present work demonstrated the functional transformation of 3D printed metal substrates into a new family of Surface-enhanced Raman Scattering substrates, a promising approach in developing SERS-based Point-of-care (PoC) analytical platforms. l-Powder Bed Fusion (l-PBF, Additive manufacturing or 3D printing technique) printed metal substrates have rough surfaces, and exhibit high thermal stability and intrinsic chemical inertness, necessitating a suitable surface functionalization approach. This present work demonstrated a unique multi-stage approach to transform l-PBF printed metal structures as recyclable SERS substrates by colloidal carbon templating, chemical vapor deposition, and electroless plating methods sequentially. The surface of the printed metal structures was functionalized using the colloidal carbon soot particles, that were formed by the eucalyptus oil flame deposition method. These carbon particles were shown to interact with the metals present in the printed structures by forming metal carbides and function as an adlayer on the surface. Subsequent deposition of TiO2 onto these templates led to strong grafting of TiO2 and retaining the fractal structure of the soot template onto the metal surface. Electroless deposition of silver nanoparticles resulted in the formation of fractally structured TiO2/Ag nanostructures and these functionalized printed metal structures were shown as excellent SERS substrates in enhancing the vibrational spectral features of Rhodamine B (RhB). The presence of TiO2 photocatalyst on the surface was shown to remove the RhB analyte from the surface under photochemical conditions, which enables the regeneration of SERS activity, and the substrate can be recycled. The migration of metals from the printed metal structures into the fractally ordered TiO2/Ag nanostructures was found to enhance the photocatalytic activity and increase the recyclability of these substrates. This study demonstrates the potential of 3D-printed Inconel metal substrates as next-generation recyclable SERS platforms, offering a substantial advancement over traditional colloidal, thin-film, flexible, and hard SERS substrates.

Deep learning models with optimized fluorescence spectroscopy to advance freshness of rainbow trout predicting under nonisothermal storage conditions

This study established long short-term memory (LSTM), convolution neural network long short-term memory (CNN_LSTM), and radial basis function neural network (RBFNN) based on optimized excitation-emission matrix (EEM) from fish eye fluid to predict freshness changes of rainbow trout under nonisothermal storage conditions. The method of residual analysis, core consistency diagnostics, and split-half analysis of parallel factor analysis was used to optimize EEM data, and two characteristic components were extracted. LSTM, CNN_LSTM, and RBFNN models based on characteristic components of EEM used to predict the freshness indices. The results demonstrated the relative errors of RBFNN models with an R2 above 0.96 and relative errors less than 10% for K-value, total viable counts, and volatile base nitrogen, which were better than those of LSTM and CNN_LSTM models. This study presents a novel approach for predicting the freshness of rainbow trout under nonisothermal storage conditions.