[Treatment of asbestos-containing waste products to prevent harm to the lungs ]

The amount of industrial wastes with asbestos such as dismantled construction materials has increased. We have reviewed the effect of asbestos-containing products subjected to harmless treatment on the lungs. Usually, the harmless treatment of asbestos is confirmed by the disappearance of fibrous materials and crystal structures by electron microscopy and X-ray diffraction. However, it is very important to perform animal studies and in vitro studies in order to examine the effect of the treated asbestos-containing products on the lungs. From previous treatments of asbestos using acids or high temperature, almost treated materials tended to show decreased toxicity in vitro and in vivo studies. There are some reports of the adverse effects of the treatment. If new harmless treatments of asbestos are developed, it is necessary to perform animal studies and in vitro studies of asbestos-containing products using new harmless treatments.

TiO2 nanoparticles translocation and potential toxicological effect in rats after intraarticular injection

Recently, nanomaterials coating gained much concern in orthopedic implants such as bone, cartilage, joint, etc. The wear particles would generate from coating in living organism due to corrosion. In this study, we demonstrated that the intraarticular injected anatase TiO2 nanoparticles had a potential toxicological effect on major organs and knee joints of rats. The histopathological changes of heart, lung and liver indicated the dissemination of intraarticular TiO2 nanoparticles from joint cavity to system. In the knee joint, the aggregated TiO2 nanoparticles deposited and resulted in the synovium hypotrophy and lymphocytes and plasma cells infiltration, but had no effects on cartilage. In the TiO2-exposed synovium, the oxidative damage was induced because the glutathione peroxidase (GSH-Px), reduced glutathione (GSH), oxidized glutathione (GSSG), and superoxide dismutase (SOD) levels were highly regulated to counteract over-produced free radicals, i.e. hydrogen peroxide (H2O2). Further, the lipid peroxidation was detected in the synovium though the expression of proinflammatory cytokines such as tumor necrosis factor alpha (TNF-alpha) and interleukin (IL-1beta) was not much interfered. This research suggested that the amounts of nanocoating in the surface of implants should be controlled and standardized.

An in vitro study of bare and poly(ethylene glycol)-co-fumarate-coated superparamagnetic iron oxide nanoparticles: a new toxicity identification procedure

As the use of superparamagnetic iron oxide nanoparticles (SPION) in biomedical applications increases (e.g. for targeting drug delivery and imaging), patients are likely to be exposed to products containing SPION. Despite their high biomedical importance, toxicity data for SPION are limited to date. The aim of this study is to investigate the cytotoxicity of SPION and its ability to change cell medium components. Bare and poly(ethylene glycol)-co-fumarate (PEGF)-coated SPION with narrow size distributions were synthesized. The particles were prepared by co-precipitation using ferric and ferrous salts with a molar Fe3+/Fe2+ ratio of 2. Dulbecco's modified Eagle's medium (DMEM) and primary mouse fibroblast (L929) cell lines were exposed to the SPION. Variation of cell medium components and cytotoxicity due to the interactions with nanoparticles were analyzed using ultraviolet and visible spectroscopy (UV/vis) and the 3-[4,5-dimethylthiazol-2yl]-2,5-diphenyltetrazolium bromide (MTT) assay methods, respectively. The toxicity amount has been traditionally identified by changes in pH and composition in cells and DMEM due to the tendency of SPION to adsorb proteins, vitamins, amino acids and ions. For in vitro toxicity assessments, a new surface passivation procedure is proposed which can yield more reliable quantitative results. It is shown that a more reliable way of identifying cytotoxicity for in vitro assessments is to use particles with saturated surfaces via interactions with DMEM before usage.

Toxicity of antimony trioxide nanoparticles on human hematopoietic progenitor cells and comparison to cell lines

Nanoparticles (NPs) are materials with one dimension in the range of 1-100 nm. The toxicity of NPs remains widely unknown and still poses concerns, due to the peculiar characteristics of materials in the nano-size range. We analyze the toxicity of seven NPs ((Fe2O3, Fe3O4, Sb2O3, Au, TiO2, Co, and Ag) on primary cultures of human hematopoietic progenitor cells from the bone marrow of healthy donors with CFU assays, and show that antimony oxide (Sb2O3) NPs and cobalt (Co) NPs have a toxic effect, while the other NPs have no effect at the tested concentrations (5, 25 and 100 microg/ml). While Co NPs suspension is toxic to both erythroid and granulocytic-monocytic precursors, Sb2O3 NPs at 5 microg/ml are specifically toxic to erythroid colony development, suggesting a highly selective type of toxicity. With liquid culture assays we show that Sb2O3 NPs impair the proliferation of erythroid progenitors, while no toxic effect is observed when Sb2O3 NPs are added during erythroid differentiation. CFU assays and liquid culture assays on seven human cell lines of hematopoietic origin (K562, HL-60, CEM, CEM-R, Thp-1, Jurkat, and Molt-4) show that, contrary to what observed on primary cultures of bone marrow progenitors, Sb2O3 NPs have no toxic effect on proliferation of any of the cell lines, raising concerns about the use of immortalized cell lines for nanotoxicology tests.

A 21st century paradigm for evaluating the health hazards of nanoscale materials?

Over the past 5 years we have seen an increase in the attention focused on the assessment of the potential health risk posed by nanoscale materials. The diversity of these materials with respect to size, composition, and surface properties, and the rapid pace of their development and commercialization, poses significant challenges to traditional toxicity testing paradigms. At the same time the potential use of new high throughput "predictive "toxicity" strategies, such as that envisioned in the recent NRC report "Toxicity Testing in the 21st Century," have emerged as possible solutions to deal with the issue of how to assess the safety of the thousands of chemicals to which humans are potentially exposed. In this forum article we discuss how in some respects, the emergence of diverse engineered nanomaterials offers a tailor-made test case for the application of a new paradigm for assessing human heath risks. However, although this approach may have merit in the study of some specific nanomaterials, this approach does not consider the complexity involved in utilizing in vitro cell culture toxicology methods to evaluate the potential hazard of the wide array of current and future engineered nanomaterials.

Toxic and teratogenic silica nanowires in developing vertebrate embryos

Silica-based nanomaterials show promise for biomedical applications such as cell-selective drug delivery and bioimaging. They are easily functionalized, which allows for the conjugation or encapsulation of important biomolecules. Although recent in vitro studies suggested that silica-derived nanomaterials are nontoxic, in vivo studies of silica nanomaterial toxicity have not been performed. Using the embryonic zebrafish as a model system, we show that silica nanomaterials with aspect ratios greater than 1 are highly toxic (LD(50) = 110 pg/g embryo) and cause embryo deformities, whereas silica nanomaterials with an aspect ratio of 1 are neither toxic nor teratogenic at the same concentrations. Silica nanowires also interfere with neurulation and disrupt expression of sonic hedgehog, which encodes a key midline signaling factor. Our results demonstrate the need for further testing of nanomaterials before they can be used as platforms for drug delivery.

FROM THE CLINICAL EDITOR

Silica-based nanomaterials show promise for biomedical applications such as cell-selective drug delivery and bioimaging. Using an embryonic zebrafish model system silica nanomaterials with aspect ratios greater than one were found to be highly toxic; whereas silica nanomaterials with an aspect ratio of one are neither toxic nor teratogenic. These results demonstrate the need for testing "nanomaterials" before they can be used as platforms for drug delivery.

Assessment of the In Vivo Toxicity of Gold Nanoparticles

The environmental impact of nanoparticles is evident; however, their toxicity due to their nanosize is rarely discussed. Gold nanoparticles (GNPs) may serve as a promising model to address the size-dependent biological response to nanoparticles because they show good biocompatibility and their size can be controlled with great precision during their chemical synthesis. Naked GNPs ranging from 3 to 100 nm were injected intraperitoneally into BALB/C mice at a dose of 8 mg/kg/week. GNPs of 3, 5, 50, and 100 nm did not show harmful effects; however, GNPs ranging from 8 to 37 nm induced severe sickness in mice. Mice injected with GNPs in this range showed fatigue, loss of appetite, change of fur color, and weight loss. Starting from day 14, mice in this group exhibited a camel-like back and crooked spine. The majority of mice in these groups died within 21 days. Injection of 5 and 3 nm GNPs, however, did not induce sickness or lethality in mice. Pathological examination of the major organs of the mice in the diseased groups indicated an increase of Kupffer cells in the liver, loss of structural integrity in the lungs, and diffusion of white pulp in the spleen. The pathological abnormality was associated with the presence of gold particles at the diseased sites, which were verified by ex vivo Coherent anti-Stoke Raman scattering microscopy. Modifying the surface of the GNPs by incorporating immunogenic peptides ameliorated their toxicity. This reduction in the toxicity is associated with an increase in the ability to induce antibody response. The toxicity of GNPs may be a fundamental determinant of the environmental toxicity of nanoparticles.

NanoGenotoxicology: the DNA damaging potential of engineered nanomaterials

With the rapid expansion in the nanotechnology industry, it is essential that the safety of engineered nanomaterials and the factors that influence their associated hazards are understood. A vital area governing regulatory health risk assessment is genotoxicology (the study of genetic aberrations following exposure to test agents), as DNA damage may initiate and promote carcinogenesis, or impact fertility. Of late, considerable attention has been given to the toxicity of engineered nanomaterials, but the importance of their genotoxic potential on human health has been largely overlooked. This comprehensive review focuses on the reported abilities of metal nanoparticles, metal-oxide nanoparticles, quantum dots, fullerenes, and fibrous nanomaterials, to damage or interact with DNA, and their ecogenotoxicity is also considered. Many of the engineered nanomaterials assessed were found to cause genotoxic responses, such as chromosomal fragmentation, DNA strand breakages, point mutations, oxidative DNA adducts and alterations in gene expression profiles. However, there are clear inconsistencies in the literature and it is difficult to draw conclusions on the physico-chemical features of nanomaterials that promote genotoxicity, largely due to study design. Hence, areas that require that further attention are highlighted and recommendations to improve our understanding of the genotoxic potential of engineered nanomaterials are addressed.

Exposure to titanium dioxide and other metallic oxide nanoparticles induces cytotoxicity on human neural cells and fibroblasts

The use of titanium dioxide (TiO₂) in various industrial applications (eg, production of paper, plastics, cosmetics, and paints) has been expanding thereby increasing the occupational and other environmental exposure of these nanoparticles to humans and other species. However, the health effects of exposure to TiO₂ nanoparticles have not been systematically assessed even though recent studies suggest that such exposure induces inflammatory responses in lung tissue and cells. Because the effects of such nanoparticles on human neural cells are unknown, we have determined the putative cytotoxic effects of these nanoparticles on human astrocytes-like astrocytoma U87 cells and compared their effects on normal human fibroblasts. We found that TiO₂ micro- and nanoparticles induced cell death on both human cell types in a concentration-related manner. We further noted that zinc oxide (ZnO) nanoparticles were the most effective, TiO₂ nanoparticles the second most effective, and magnesium oxide (MgO) nanoparticles the least effective in inducing cell death in U87 cells. The cell death mechanisms underlying the effects of TiO₂ micro- and nanoparticles on U87 cells include apoptosis, necrosis, and possibly apoptosis-like and necrosis-like cell death types. Thus, our findings may have toxicological and other pathophysiological implications on exposure of humans and other mammalian species to metallic oxide nanoparticles.

Toxicity of therapeutic nanoparticles

A total of six nanotherapeutic formulations are already approved for medical use and more are in the approval pipeline currently. Despite the massive research effort in nanotherapeutic materials, there is relatively little information about the toxicity of these materials or the tools needed to assess this toxicity. Recently, the scientific community has begun to respond to the paucity of information by investing in the field of nanoparticle toxicology. This review is intended to provide an overview of the techniques needed to assess toxicity of these therapeutic nanoparticles and to summarize the current state of the field. We begin with background on the toxicological assessment techniques used currently as well as considerations in nanoparticle dosing. The toxicological research overview is divided into the most common applications of therapeutic nanoparticles: drug delivery, photodynamic therapy and bioimaging. We end with a perspective section discussing the current technological gaps and promising research aimed at addressing those gaps.

Surface area of particle administered versus mass in determining the pulmonary toxicity of ultrafine and fine carbon black: comparison to ultrafine titanium dioxide

Background

Nanoparticles are characterized by having a high surface area per mass. Particulate surface area has been reported to play an important role in determining the biological activity of nanoparticles. However, recent reports have questioned this relationship. This study was conducted to determine whether mass of particles or surface area of particles is the more appropriate dose metric for pulmonary toxicity studies. In this study, rats were exposed by intratracheal instillation to various doses of ultrafine and fine carbon black. At 1, 7, or 42 days post-exposure, inflammatory and cytotoxic potential of each particle type was compared on both a mass dosage (mg/rat) as well as an equal surface area dosage (cm² of particles per cm² of alveolar epithelium). In an additional study, the pulmonary responses to instillation of ultrafine carbon black were compared to equivalent particle surface area doses of ultrafine titanium dioxide.

Results

Ultrafine carbon black particles caused a dose dependent but transient inflammatory and cytotoxic response. On a mass basis, these responses were significantly (65 fold) greater than those for fine sized carbon black. However, when doses were equalized based on surface area of particles given, the ultrafine carbon black particles were only slightly (non-significantly) more inflammogenic and cytotoxic compared to the fine sized carbon black. At one day post-exposure, inflammatory potencies of the ultrafine carbon black and ultrafine titanium dioxide particles were similar. However, while the pulmonary reaction to ultrafine carbon black resolved with time, the inflammatory effects of ultrafine titanium dioxide were more persistent over a 42 day post-exposure period.

Conclusion

These results indicate that for low toxicity low solubility materials, surface area of particles administered rather than mass burden of particles may be a more appropriate dose metric for pulmonary toxicity studies. In addition, ultrafine titanium dioxide appears to be more bioactive than ultrafine carbon black on an equivalent surface area of particles delivered basis.

Sulfide Mineral Induced Oxidative Stress as a Limiting Factor in Tank Bioleaching Performance

In tank bioleaching, decreasing particle size of milled concentrates has been shown to improve leaching performance owing to increased mineral surface area and mechanical activation effects of fine mineral particles. However, evidence suggests a critical lower limit of particle size distribution exists below which the performance of the thermophilic iron and sulfur oxidizer Sulfolobus metallicus is compromised and complete culture death may result. This paper proposes an explanation for these observations at fine fractions through identifying a relationship between mineral composition of six sulfide concentrates, their extent of milling and the generation of the reactive oxygen species (ROS) hydrogen peroxide (H2O2) and hydroxyl radicals (•OH) in slurries. The effect of oxidative stress induced in the absence of minerals on growth and bioleaching performance of S. metallicus is studied.

Oxidatively damaged DNA in rats exposed by oral gavage to C60 fullerenes and single-walled carbon nanotubes

BACKGROUND

C60 fullerenes and single-walled carbon nanotubes (SWCNT) are projected to be used in medicine and consumer products with potential human exposure. The hazardous effects of these particles are expected to involve oxidative stress with generation of oxidatively damaged DNA that might be the initiating event in the development of cancer.

OBJECTIVE

In this study we investigated the effect of a single oral administration of C60 fullerenes and SWCNT.

METHODS

We measured the level of oxidative damage to DNA as the premutagenic 8-oxo-7,8-dihydro-2'-deoxyguanosine (8-oxodG) in the colon mucosa, liver, and lung of rats after intragastric administration of pristine C60 fullerenes or SWCNT (0.064 or 0.64 mg/kg body weight) suspended in saline solution or corn oil. We investigated the regulation of DNA repair systems toward 8-oxodG in liver and lung tissue.

RESULTS

Both doses of SWCNT increased the levels of 8-oxodG in liver and lung. Administration of C60 fullerenes increased the hepatic level of 8-oxodG, whereas only the high dose generated 8-oxodG in the lung. We detected no effects on 8-oxodG in colon mucosa. Suspension of particles in saline solution or corn oil yielded a similar extent of genotoxicity, whereas corn oil per se generated more genotoxicity than the particles. Although there was increased mRNA expression of 8-oxoguanine DNA glycosylase in the liver of C60 fullerene-treated rats, we found no significant increase in repair activity.

CONCLUSIONS

Oral exposure to low doses of C60 fullerenes and SWCNT is associated with elevated levels of 8-oxodG in the liver and lung, which is likely to be caused by a direct genotoxic ability rather than an inhibition of the DNA repair system.

Nanotechnology in vaccine development: a step forward

The study of nanotechnology for epicutaneous delivery of pharmaceuticals and vaccines is burgeoning. Topically applied nanomaterials have been shown to enter tape-stripped skin and reach draining lymph nodes in an inbred strain of mice. Nanomaterials in the form of plasmid DNA, proteins, and virus particles accumulate in hair follicles, diffuse via dendritic cells to draining lymph nodes, and elicit antigen-specific humoral and cell-mediated immunity. Topically immunized mice have also demonstrated resistance to infection with live virus. Advantages of nanotechnology include uniformity, reproducibility, and precision in the synthesis and manufacture of candidate compounds. Combined with novel pharmacokinetics and the possibility of targeted therapy, nanotechnology-based vaccines may prove superior to existing vaccines and have the potential to open therapeutic avenues for treating infectious disease and malignancy.

Mouse lung inflammation after instillation of particulate matter collected from a working dairy barn

Coarse and fine particulate matter (PM(2.5-10) and PM(2.5), respectively) are regulated ambient air pollutants thought to have major adverse health effects in exposed humans. The role of endotoxin and other bioaerosol components in the toxicity of PM from ambient air is controversial. This study evaluated the inflammatory lung response in mice instilled intratracheally with PM(2.5-10) and PM(2.5) emitted from a working dairy barn, a source presumed to have elevated concentrations of endotoxin. PM(2.5-10) was more pro-inflammatory on an equal weight basis than was PM(2.5); both fractions elicited a predominantly neutrophilic response. The inflammatory response was reversible, with a peak response to PM(2.5-10) observed at 24 h after instillation, and a return to control values by 72 h after instillation. The major active pro-inflammatory component in whole PM(2.5-10), but not in whole PM(2.5), is heat-labile, consistent with it being endotoxin. A heat treatment protocol for the gradual inactivation of biological materials in the PM fractions over a measurable time course was developed and optimized in this study using pure lipopolysaccharide (LPS) as a model system. The time course of heat inactivation of pure LPS and of endotoxin activity in PM(2.5-10) as measured by Limulus bioassay is identical. The active material in both PM(2.5-10) and PM(2.5) remained in the insoluble fraction when the whole PM samples were extracted with physiological saline solution. Histological analysis of lung sections from mice instilled with PM(2.5-10) or PM(2.5) showed evidence of inflammation consistent with the cellular responses observed in lung lavage fluid. The major pro-inflammatory components present in endotoxin-rich PM were found in the insoluble fraction of PM(2.5-10); however, in contrast with PM(2.5-10) isolated from ambient air in the Central Valley of California, the active components in the insoluble fraction were heat-labile.

Increased non-conducted P-wave arrhythmias after a single oil fly ash inhalation exposure in hypertensive rats

BACKGROUND

Exposure to combustion-derived fine particulate matter (PM) is associated with increased cardiovascular morbidity and mortality especially in individuals with cardiovascular disease, including hypertension. PM inhalation causes several adverse changes in cardiac function that are reflected in the electrocardiogram (ECG), including altered cardiac rhythm, myocardial ischemia, and reduced heart rate variability (HRV). The sensitivity and reliability of ECG-derived parameters as indicators of the cardiovascular toxicity of PM in rats are unclear.

OBJECTIVE

We hypothesized that spontaneously hypertensive (SH) rats are more susceptible to the development of PM-induced arrhythmia, altered ECG morphology, and reduced HRV than are Wistar Kyoto (WKY) rats, a related strain with normal blood pressure.

METHODS

We exposed rats once by nose-only inhalation for 4 hr to residual oil fly ash (ROFA), an emission source particle rich in transition metals, or to air and then sacrificed them 1 or 48 hr later.

RESULTS

ROFA-exposed SH rats developed non-conducted P-wave arrhythmias but no changes in ECG morphology or HRV. We found no ECG effects in ROFA-exposed WKY rats. ROFA-exposed SH rats also had greater pulmonary injury, neutrophil infiltration, and serum C-reactive protein than did ROFA-exposed WKY rats.

CONCLUSIONS

These results suggest that cardiac arrhythmias may be an early sensitive indicator of the propensity for PM inhalation to modify cardiovascular function.

Comparative toxicity of 24 manufactured nanoparticles in human alveolar epithelial and macrophage cell lines

Background

A critical issue with nanomaterials is the clear understanding of their potential toxicity. We evaluated the toxic effect of 24 nanoparticles of similar equivalent spherical diameter and various elemental compositions on 2 human pulmonary cell lines: A549 and THP-1. A secondary aim was to elaborate a generic experimental set-up that would allow the rapid screening of cytotoxic effect of nanoparticles. We therefore compared 2 cytotoxicity assays (MTT and Neutral Red) and analyzed 2 time points (3 and 24 hours) for each cell type and nanoparticle. When possible, TC50 (Toxic Concentration 50 i.e. nanoparticle concentration inducing 50% cell mortality) was calculated.

Results

The use of MTT assay on THP-1 cells exposed for 24 hours appears to be the most sensitive experimental design to assess the cytotoxic effect of one nanoparticle. With this experimental set-up, Copper- and Zinc-based nanoparticles appear to be the most toxic. Titania, Alumina, Ceria and Zirconia-based nanoparticles show moderate toxicity, and no toxicity was observed for Tungsten Carbide. No correlation between cytotoxicity and equivalent spherical diameter or specific surface area was found.

Conclusion

Our study clearly highlights the difference of sensitivity between cell types and cytotoxicity assays that has to be carefully taken into account when assessing nanoparticles toxicity.

The limits of testing particle-mediated oxidative stress in vitro in predicting diverse pathologies; relevance for testing of nanoparticles

In vitro studies with particles are a major staple of particle toxicology, generally used to investigate mechanisms and better understand the molecular events underlying cellular effects. However, there is ethical and financial pressure in nanotoxicology, the new sub-specialty of particle toxicology, to avoid using animals. Therefore an increasing amount of studies are being published using in vitro approaches and such studies require careful interpretation. We point out here that 3 different conventional pathogenic particle types, PM₁₀, asbestos and quartz, which cause diverse pathological effects, have been reported to cause very similar oxidative stress effects in cells in culture. We discuss the likely explanation and implications of this apparent paradox, and its relevance for testing in nanotoxicology.

Nanoparticle penetration and transport in living pumpkin plants: in situ subcellular identification

BACKGROUND

In recent years, the application of nanotechnology in several fields of bioscience and biomedicine has been studied. The use of nanoparticles for the targeted delivery of substances has been given special attention and is of particular interest in the treatment of plant diseases. In this work both the penetration and the movement of iron-carbon nanoparticles in plant cells have been analyzed in living plants of Cucurbita pepo.

RESULTS

The nanoparticles were applied in planta using two different application methods, injection and spraying, and magnets were used to retain the particles in movement in specific areas of the plant. The main experimental approach, using correlative light and electron microscopy provided evidence of intracellular localization of nanoparticles and their displacement from the application point. Long range movement of the particles through the plant body was also detected, particles having been found near the magnets used to immobilize and concentrate them. Furthermore, cell response to the nanoparticle presence was detected.

CONCLUSION

Nanoparticles were capable of penetrating living plant tissues and migrating to different regions of the plant, although movements over short distances seemed to be favoured. These findings show that the use of carbon coated magnetic particles for directed delivery of substances into plant cells is a feasible application.

Lack of acute phase response in the livers of mice exposed to diesel exhaust particles or carbon black by inhalation

BACKGROUND

Epidemiologic and animal studies have shown that particulate air pollution is associated with increased risk of lung and cardiovascular diseases. Although the exact mechanisms by which particles induce cardiovascular diseases are not known, studies suggest involvement of systemic acute phase responses, including C-reactive protein (CRP) and serum amyloid A (SAA) in humans. In this study we test the hypothesis that diesel exhaust particles (DEP) - or carbon black (CB)-induced lung inflammation initiates an acute phase response in the liver.

RESULTS

Mice were exposed to filtered air, 20 mg/m3 DEP or CB by inhalation for 90 minutes/day for four consecutive days; we have previously shown that these mice exhibit pulmonary inflammation (Saber AT, Bornholdt J, Dybdahl M, Sharma AK, Loft S, Vogel U, Wallin H. Tumor necrosis factor is not required for particle-induced genotoxicity and pulmonary inflammation., Arch. Toxicol. 79 (2005) 177-182). As a positive control for the induction of an acute phase response, mice were exposed to 12.5 mg/kg of lipopolysaccharide (LPS) intraperitoneally. Quantitative real time RT-PCR was used to examine the hepatic mRNA expression of acute phase proteins, serum amyloid P (Sap) (the murine homologue of Crp) and Saa1 and Saa3. While significant increases in the hepatic expression of Sap, Saa1 and Saa3 were observed in response to LPS, their levels did not change in response to DEP or CB. In a comprehensive search for markers of an acute phase response, we analyzed liver tissue from these mice using high density DNA microarrays. Globally, 28 genes were found to be significantly differentially expressed in response to DEP or CB. The mRNA expression of three of the genes (serine (or cysteine) proteinase inhibitor, clade A, member 3C, apolipoprotein E and transmembrane emp24 domain containing 3) responded to both exposures. However, these changes were very subtle and were not confirmed by real time RT-PCR.

CONCLUSION

Our findings collectively suggest that Sap, Saa1 and Saa3 are not induced in livers of mice exposed to DEP or CB. Despite pulmonary inflammation in these mice, global transcriptional profiling of liver did not reveal any hepatic response following exposure by inhalation.

Driver and passenger exposure to aerosol particles in buses and trams in Helsinki, Finland

This study investigates commuter and driver exposure to aerosol particles in buses and trams in Helsinki, Finland. Particle number and PM(2.5) concentrations were determined in the cabin and the driver's compartment. In addition, the <2.5 microm black carbon concentration was measured in the driver's compartment and PM(2.5) was collected for elemental analysis in the cabin. The measurements were repeated on two generations of buses and trams including two measurement days in each vehicle type. Fine particle number and mass concentrations in the driver's compartments were only slightly increased compared to Helsinki background air. Daily average ratios of number and mass to the background varied in range 0.8-4.3 and 1.0-2.9, respectively, both being the highest in the older bus type. However, the drivers were exposed to elevated levels of black carbon, which some studies have addressed to be strongly correlated with adverse health effects. The daily average ratio of black carbon to the background varied between 2.4 and 11.4. Additionally, the black carbon concentration had spatial variation. The drivers were exposed to higher peak concentrations of black carbon in downtown area. Particle concentrations were smaller in the driver's compartment than in the cabin. The newer technology in the newer model of the tram and bus seemed to decrease driver exposure to aerosol particles.

Emerging methods and tools for environmental risk assessment, decision-making, and policy for nanomaterials: summary of NATO Advanced Research Workshop

Nanomaterials and their associated technologies hold promising opportunities for the development of new materials and applications in a wide variety of disciplines, including medicine, environmental remediation, waste treatment, and energy conservation. However, current information regarding the environmental effects and health risks associated with nanomaterials is limited and sometimes contradictory. This article summarizes the conclusions of a 2008 NATO workshop designed to evaluate the wide-scale implications (e.g., benefits, risks, and costs) of the use of nanomaterials on human health and the environment. A unique feature of this workshop was its interdisciplinary nature and focus on the practical needs of policy decision makers. Workshop presentations and discussion panels were structured along four main themes: technology and benefits, human health risk, environmental risk, and policy implications. Four corresponding working groups (WGs) were formed to develop detailed summaries of the state-of-the-science in their respective areas and to discuss emerging gaps and research needs. The WGs identified gaps between the rapid advances in the types and applications of nanomaterials and the slower pace of human health and environmental risk science, along with strategies to reduce the uncertainties associated with calculating these risks.

Toxicity of tungsten carbide and cobalt-doped tungsten carbide nanoparticles in mammalian cells in vitro

BACKGROUND

Tungsten carbide nanoparticles are being explored for their use in the manufacture of hard metals. To develop nanoparticles for broad applications, potential risks to human health and the environment should be evaluated and taken into consideration.

OBJECTIVE

We aimed to assess the toxicity of well-characterized tungsten carbide (WC) and cobalt-doped tungsten carbide (WC-Co) nanoparticle suspensions in an array of mammalian cells.

METHODS

We examined acute toxicity of WC and of WC-Co (10% weight content Co) nanoparticles in different human cell lines (lung, skin, and colon) as well as in rat neuronal and glial cells (i.e., primary neuronal and astroglial cultures and the oligodendrocyte precursor cell line OLN-93). Furthermore, using electron microscopy, we assessed whether nanoparticles can be taken up by living cells. We chose these in vitro systems in order to evaluate for potential toxicity of the nanoparticles in different mammalian organs (i.e., lung, skin, intestine, and brain).

RESULTS

Chemical-physical characterization confirmed that WC as well as WC-Co nanoparticles with a mean particle size of 145 nm form stable suspensions in serum-containing cell culture media. WC nanoparticles were not acutely toxic to the studied cell lines. However, cytotoxicity became apparent when particles were doped with Co. The most sensitive were astrocytes and colon epithelial cells. Cytotoxicity of WC-Co nanoparticles was higher than expected based on the ionic Co content of the particles. Analysis by electron microscopy demonstrated presence of WC nanoparticles within mammalian cells.

CONCLUSIONS

Our findings demonstrate that doping of WC nanoparticles with Co markedly increases their cytotoxic effect and that the presence of WC-Co in particulate form is essential to elicit this combinatorial effect.

A new strategy to probe the genotoxicity of silver nanoparticles combined with cetylpyridine bromide

The environmental genotoxic behavior of silver nanoparticles (nanoAg) combined with the detergent cetylpyridine bromide (CPB) was examined in vitro. The experimental results showed that the genotoxicity of nanoAg itself is weak, but nanoAg shows obvious genotoxicity after combined with CPB. The combined materials have a strong coeffect on calf thymus DNA (ctDNA) at a concentration of 3.3 x 10(-6 )gmL(-1) nanoAg and 6.0 x 10(-6) molL(-1) CPB. After the addition of ctDNA to the nanoAg-CPB system, the particles are scattered and the diameter decreases, which indirectly reveal that nanoAg-CPB has genotoxicity.

Direct impairment of vascular function by diesel exhaust particulate through reduced bioavailability of endothelium-derived nitric oxide induced by superoxide free radicals

BACKGROUND

Diesel exhaust particulate (DEP) is a key arbiter of the adverse cardiovascular effects of air pollution.

OBJECTIVES

We assessed the in vitro effects of DEP on vascular function, nitric oxide (NO) availability, and the generation of oxygen-centered free radicals.

METHODS

We assessed the direct vascular effects of DEP (10-100 microg/mL) in isolated rat aortic rings using myography. We investigated NO scavenging and oxygen-centered free radical generation using an NO electrode and electron paramagnetic resonance (EPR) with the Tempone-H (1-hydroxyl-2,2,6,6-tetramethyl-4-oxo-piperidine) spin trap, respectively.

RESULTS

Acetylcholine-induced relaxation was attenuated by DEP (maximum relaxation reduced from 91 +/- 4% to 49 +/- 6% with 100 microg/mL DEP; p < 0.001) but was restored by superoxide dismutase (SOD; maximum relaxation, 73 +/- 6%; p < 0.001). DEP caused a modest inhibition of relaxation to NO donor drugs, an effect that could be reversed by SOD (p < 0.01). At 10 microg/mL, DEP did not affect verapamil-induced relaxation (p = 0.73), but at 100 microg/mL DEP inhibited relaxation (p < 0.001) by a mechanism independent of SOD. NO concentrations generated by 2-(N,N-diethylamino)-diazenolate-2-oxide (DEA/NO; 10 microM) were reduced by DEP (100 microg/mL; from 5.2 +/- 0.4 to 3.3 +/- 0.4 microM; p = 0.002). Free radical generation was increased by DEP (10 microg/mL; 9-fold increase in EPR spectra; p = 0.004) in a manner that could be attenuated by SOD (p = 0.015).

CONCLUSIONS

DEP caused oxidative stress through the generation of oxygen-centered free radicals that reduced the bioavailability of endothelium-derived NO without prior interaction with the lung or vascular tissue. These findings provide a mechanism for the adverse cardiovascular effects of particulate air pollution.

Electrophilic and redox properties of diesel exhaust particles

The adverse health effects of air pollutants have been associated with their redox and electrophilic properties. Although the specific chemical species involved in these effects are not known, the characterization of their general physical and chemical properties is important to our understanding of the mechanisms by which they cause health problems. This manuscript describes results of a study examining the partition properties of these activities in aqueous and organic media. The water and dichloromethane (DCM) solubility of redox active and electrophilic constituents of seven diesel exhaust particle (DEP) samples were determined with assays developed earlier in this laboratory. The constituents exhibiting redox activity, which included both metals and nonmetal species, were associated with the particles in the aqueous suspensions. Portions of the redox active compounds were also DCM-soluble. In contrast, the electrophilic constituents included both water-soluble and DCM-soluble species. The role of quinones or quinone-like compounds in redox and electrophilic activities of the DCM-soluble constituents was assessed by reductive acetylation, a procedure that inactivates quinones. The results from this experiment indicated that most of the activities in the organic extract were associated with quinone-like substances. The partition properties of the reactive species are important in exposure assessment since the toxicokinetics of particles and solutes are quite distinct.

Direct combination of nanoparticle fabrication and exposure to lung cell cultures in a closed setup as a method to simulate accidental nanoparticle exposure of humans

The tremendous application potential of nanosized materials stays in sharp contrast to a growing number of critical reports of their potential toxicity. Applications of in vitro methods to assess nanoparticles are severely limited through difficulties in exposing cells of the respiratory tract directly to airborne engineered nanoparticles. We present a completely new approach to expose lung cells to particles generated in situ by flame spray synthesis. Cerium oxide nanoparticles from a single run were produced and simultaneously exposed to the surface of cultured lung cells inside a glovebox. Separately collected samples were used to measure hydrodynamic particle size distribution, shape, and agglomerate morphology. Cell viability was not impaired by the conditions of the glovebox exposure. The tightness of the lung cell monolayer, the mean total lamellar body volume, and the generation of oxidative DNA damage revealed a dose-dependent cellular response to the airborne engineered nanoparticles. The direct combination of production and exposure allows studying particle toxicity in a simple and reproducible way under environmental conditions.

Comparison of manufactured and black carbon nanoparticle concentrations in aquatic sediments

In this paper, we show that concentrations of manufactured carbon-based nanoparticles (MCNPs) in aquatic sediments will be negligible compared to levels of black carbon nanoparticles (BCNPs). This is concluded from model calculations accounting for MCNP sedimentation fluxes, removal rates due to aggregation or degradation, and MCNP burial in deeper sediment layers. The resultant steady state MCNP levels are compared with BCNP levels calculated from soot levels in sediments and weight fractions of nanosized fractions of these soot particles. MCNP/BCNP ratios range from 10(-7) to 10(-4) (w:w). This suggests that the often acclaimed effect of MCNPs on organic pollutant binding and bioavailability will likely be below the level of detection if natural BCNPs are present, even if binding to MCNP is one to two orders of magnitude stronger than to BCNPs. Furthermore, exposure and toxic effects of MCNPs in sediments and soils will be negligible compared to that of BCNPs.

In vivo screening to determine hazards of nanoparticles: nanosized TiO2

A single-species laboratory test with terrestrial invertebrates was used to identify the hazard of nanosized TiO(2). Feeding parameters, weight change, mortality, and the activities of catalase and glutathione-S-transferase were evaluated after 3 or 14 days of dietary exposure. The effects of nano-TiO(2) were dependent on exposure concentration and duration, total consumed quantity, size and pre-treatment of particles. The intensity of a response was ruled by duration of exposure and not by consumed quantity of nano-TiO(2) or exposure concentration as expected. The response to nano-TiO(2) is described as threshold-like. The exposure concentrations 10-1000 microg TiO(2)/g dry food (1.35-1025 microg of total consumed quantity of TiO(2)/g animal wet wt.) were identified as safe for tested species after tested exposure period. We conclude that the response to nanoparticles is different from that of soluble chemicals therefore these two types of data should be interpreted and processed differently.

Effects of alkylated-chitosan-DNA nanoparticles on the function of macrophages

Chitosan could form nanoparticles with DNA through electrostatic interaction, and hence protect the DNA from enzymatic degradation. Numerous studies have been working on modifying chitosan aiming at improving its transgenic efficacy. While the modification of chitosan with alkyl group has been shown to significantly improve the cell transfection efficiency, little is known about its impact on its biocompatibility. The current study was performed to investigate the impact of alkylated-chitosan/DNA nanoparticles on the function of the murine macrophage through observing its phagocytic activity and production of pro-inflammatory cytokines (IL-1beta, IL-6, IL-10, IL-12 and TNF-alpha). Our results demonstrated that the alkylated-chitosan/DNA nanoparticles at the concentration of 20 microg/ml DNA content had no significant impact on the production of cytokines and phagocytic activity of the macrophages as compared with the unmodified chitosan/DNA nanoparticles and negative control even after 24 h co-incubation. It suggested that the modification of chitosan with alkyl group should not have negative impact on the function of the macrophages.

Investigation into pedestrian exposure to near-vehicle exhaust emissions

BACKGROUND

Inhalation of diesel particulate matter (DPM) is known to have a negative impact on human health. Consequently, there are regulations and standards that limit the maximum concentrations to which persons may be exposed and the maximum concentrations allowed in the ambient air. However, these standards consider steady exposure over large spatial and time scales. Due to the nature of many vehicle exhaust systems, pedestrians in close proximity to a vehicle's tailpipe may experience events where diesel particulate matter concentrations are high enough to cause acute health effects for brief periods of time.

METHODS

In order to quantify these exposure events, instruments which measure specific exhaust constituent concentrations were placed near a roadway and connected to the mouth of a mannequin used as a pedestrian surrogate. By measuring concentrations at the mannequin's mouth during drive-by events with a late model diesel truck, a representative estimate of the exhaust constituent concentrations to which a pedestrian may be exposed was obtained. Typical breathing rates were then multiplied by the measured concentrations to determine the mass of pollutant inhaled.

RESULTS

The average concentration of diesel particulate matter measured over the duration of a single drive-by test often exceeded the low concentrations used in human clinical studies which are known to cause acute health effects. It was also observed that higher concentrations of diesel particulate matter were measured at the height of a stroller than were measured at the mouth of a mannequin.

CONCLUSION

Diesel particulate matter concentrations during drive-by incidents easily reach or exceed the low concentrations that can cause acute health effects for brief periods of time. For the case of a particularly well-tuned late-model year vehicle, the mass of particulate matter inhaled during a drive-by incident is small compared to the mass inhaled daily at ambient conditions. On a per breath basis, however, the mass of particulate matter inhaled is large compared to the mass inhaled at ambient conditions. Finally, it was determined that children, infants, or people breathing at heights similar to that of a passing vehicle's tailpipe may be exposed to higher concentrations of particulate matter than those breathing at higher locations, such as adults standing up.

The compatible solute ectoine protects against nanoparticle-induced neutrophilic lung inflammation

RATIONALE

Inflammatory reactions of the airways induced by nanoparticles of occupational and environmental origin contribute to organ-specific and systemic human diseases. Because this kind of exposure in modern societies is often unavoidable, a strategy of molecular prevention on an individual level could help to prevent inflammation-derived secondary diseases.

OBJECTIVES

To test whether the compatible solute ectoine [(S)-2-methyl-1,4,5,6-tetrahydropyrimidine-4-carboxylic acid], which is known to reduce cell stress effects on a molecular level, prevents nanoparticle-induced lung inflammation.

METHODS

Inflammatory parameters were studied in Fischer 344 rats treated with model carbon nanoparticles. The molecular effects of ectoin on proinflammatory signal transduction were demonstrated in the rat and in the human system using cultured lung epithelial cells.

MEASUREMENTS AND MAIN RESULTS

Ectoine, given with or before the nanoparticles, dose-dependently reduced neutrophil inflammation in the lung. This preventive effect was not observed when lung inflammation was induced by bacterial lipopolysaccharide. Analyses of the underlying mode of action revealed that ectoine acted on lung epithelial cells. Ectoine administration inhibited nanoparticle-induced signaling, which is known to be responsible for proinflammatory reactions in rat lung epithelial cells in vitro as well as in vivo. These findings were corroborated and extended in experiments with cultured human bronchial epithelial cells in which ectoine inhibited nanoparticle-triggered cell signaling and IL-8 induction.

CONCLUSIONS

Because compatible solutes are compliant natural products without known toxic potential, we propose that this group of substances may be used for the prevention of particle-induced airway inflammation in humans.

Development of a short-term inhalation test in the rat using nano-titanium dioxide as a model substance

Evidence suggests that short-term inhalation studies may provide comparable prediction of respiratory tract toxicity to 90-day studies, presenting the opportunity to save time and resources in screening inhalation toxicity of test substances. The aim of this study was to develop a short-term inhalation test that could be employed to provide early evidence on respiratory tract effects which might occur from long-term exposure to aerosols of nano-materials. Male Wistar rats were exposed to aerosols of 0 (control), 2, 10 and 50 mg/m(3) nano-titanium dioxide (TiO2) by inhalation for 6 h/day for 5 days. Necropsies were performed either immediately after the last exposure or after 3 and 16 days post exposure (study days 5, 8 and 21, respectively). Treatment with nano-TiO2 resulted in morphological changes in the lung, with 50 mg/m(3) nano-TiO2 producing an increase in lung weight. Lung inflammation was associated with dose-dependent increases in bronchoalveolar lavage fluid (BALF) total cell and neutrophil counts, total protein content, enzyme activities and levels of a number of cell mediators. No indications of systemic effects could be found by measurement of appropriate clinical pathology parameters. Cell replication (determined by incorporation of 5-bromo-2'-deoxyuridine) was increased at all nano-TiO2 dose levels in large/medium bronchi and terminal bronchioles. The effects on the parameters measured were most prominent either on study day 5 or 8, with some endpoints returning to control levels by day 21. Overall, the pulmonary effects of nano-TiO2 observed in this short-term study were comparable to those previously reported in subchronic inhalation studies.

Immunological responses in C3H/HeJ mice following nose-only inhalation exposure to different sizes of beryllium metal particles

Beryllium is used in a wide variety of industries. Chronic beryllium disease is the most common occupational disease among workers following exposure to Be. The objective of this study was to determine the immunologic effects of two different particle sizes of Be metal, <2.5 microm (fine Be or Be-F) and <10 microm (inhalable Be or Be-I) on C3H/HeJ mice following 3 weeks of nose-only inhalation exposure at a target concentration of 250 microg m(-3). Mice were sacrificed either on day 28 or day 42 (Be-F group only) after exposure. The mass median aerodynamic diameter obtained in the inhalation chamber was 1.5 +/- 0.1 microm for Be-F and 4.1 +/- 0.6 microm for Be-I. Results showed peri-bronchial inflammation with early granulomatous changes in exposed mice. The extent of the inflammation appeared more severe for mice sacrificed at day 42. Splenocyte proliferation was higher for mice exposed to fine particles compared with Be-I and control animals. Flow-cytometric analysis indicated a significantly greater expression of CD4(+), CD8(+) and intracellular IFN-gamma expression for both Be particle sizes, particularly for fine particles. Cytokine assays of bronchoalveolar lavage revealed significantly greater levels of IL-12, TNF-alpha and IFN-gamma for mice exposed to fine particles. Our findings suggest that exposure to fine particles may induce more pronounced immunological effects than inhalable particles.

Nanosized zinc oxide particles induce neural stem cell apoptosis

Given the intensive application of nanoscale zinc oxide (ZnO) materials in our life, growing concerns have arisen about its unintentional health and environmental impacts. In this study, the neurotoxicity of different sized ZnO nanoparticles in mouse neural stem cells (NSCs) was investigated. A cell viability assay indicated that ZnO nanoparticles manifested dose-dependent, but no size-dependent toxic effects on NSCs. Apoptotic cells were observed and analyzed by confocal microscopy, transmission electron microscopy examination, and flow cytometry. All the results support the viewpoint that the ZnO nanoparticle toxicity comes from the dissolved Zn(2+) in the culture medium or inside cells. Our results highlight the need for caution during the use and disposal of ZnO manufactured nanomaterials to prevent the unintended environmental and health impacts.

Urban air pollution: influences on olfactory function and pathology in exposed children and young adults

Mexico City (MC) residents are exposed to severe air pollution and exhibit olfactory bulb inflammation. We compared the olfactory function of individuals living under conditions of extreme air pollution to that of controls from a relatively clean environment and explore associations between olfaction scores, apolipoprotein E (APOE) status, and pollution exposure. The olfactory bulbs (OBs) of 35 MC and 9 controls 20.8+/-8.5 years were assessed by light and electron microscopy. The University of Pennsylvania Smell Identification Test (UPSIT) was administered to 62 MC/25 controls 21.2+/-2.7 years. MC subjects had significantly lower UPSIT scores: 34.24+/-0.42 versus controls 35.76+/-0.40, p=0.03. Olfaction deficits were present in 35.5% MC and 12% of controls. MC APOE epsilon 4 carriers failed 2.4+/-0.54 items in the 10-item smell identification scale from the UPSIT related to Alzheimer's disease, while APOE 2/3 and 3/3 subjects failed 1.36+/-0.16 items, p=0.01. MC residents exhibited OB endothelial hyperplasia, neuronal accumulation of particles (2/35), and immunoreactivity to beta amyloid betaA(42) (29/35) and/or alpha-synuclein (4/35) in neurons, glial cells and/or blood vessels. Ultrafine particles were present in OBs endothelial cytoplasm and basement membranes. Control OBs were unremarkable. Air pollution exposure is associated with olfactory dysfunction and OB pathology, APOE 4 may confer greater susceptibility to such abnormalities, and ultrafine particles could play a key role in the OB pathology. This study contributes to our understanding of the influences of air pollution on olfaction and its potential contribution to neurodegeneration.