Glowing graphene quantum dots and carbon dots: properties, syntheses, and biological applications

New Technologies and Strategies for Grapevine Breeding Through Genetic Transformation

Grapevine, as other woody perennials, has been considered a recalcitrant crop to produce transgenic plants. Since the production of transgenic and/or edited plants requires the ability to regenerate plants from transformed tissues, this step is often the biggest bottleneck in the process. The objective of this work is to review the state of the art technologies and strategies for the improvement of grapevine transformation and regeneration, focusing on three aspects: (i) problems associated with grapevine transformation; (ii) genes that promote grapevine regeneration; and (iii) vehicles for gene delivery. Concerning the first aspect, it is well documented that one of the main factors explaining the low success rate in obtaining transgenic plants is the regeneration process. After transgenic integration into receptor cells, tissue culture is required to regenerate transgenic seedlings from transformed cells. This process is time consuming and often requires the addition of environmentally damaging reagents (antibiotics and herbicides) to the culture medium to select transgenic plants. On the other hand, the expression of genes such as the so-called developmental regulators (DR), which induce specific development programs, can be used to avoid traditional tissue culture methods. The ectopic expression of specific combinations of DR in somatic cells has the potential to induce de novo meristems in diverse crops, including grapevine. Successful genome editing by de novo reprogramming of plant meristems in somatic tissues has been reported. Moreover, it has been shown that the expression of certain transcription factors can increase the regeneration efficiency in wheat, citrus, and rice. Finally, recent reports showed the use of nanoparticles, such as carbon dots (CDs), as an attractive alternative to Agrobacterium- and biolistic-mediated plant genetic transformation. In this way, the use of antibiotics in culture media is avoided, overcoming the loss of viability of plant tissues and accelerating the regeneration processes. It has been shown that CDs can act as a vehicle to transport plasmids to plant cells in transient transformation in several crops without negative impacts on photosynthesis or growth. Based on these advances, it is possible to combine these new available strategies and technologies to overcome the regeneration problems of species such as grapevine and other crops considered as recalcitrant.

Graphene Family Nanomaterials (GFN)-TiO2 for the Photocatalytic Removal of Water and Air Pollutants: Synthesis, Characterization, and Applications

Given the industrial revolutions and resource scarcity, the development of green technologies which aims to conserve resources and reduce the negative impacts of technology on the environment has become a critical issue of concern. One example is heterogeneous photocatalytic degradation. Titanium dioxide (TiO2) has been intensively researched given its low toxicity and photocatalytic effects under ultraviolet (UV) light irradiation. The advantages conferred by the physical and electrochemical properties of graphene family nanomaterials (GFN) have contributed to the combination of GFN and TiO2 as well as the current variety of GFN-TiO2 catalysts that have exhibited improved characteristics such as greater electron transfer and narrower bandgaps for more potential applications, including those under visible light irradiation. In this review, points of view on the intrinsic properties of TiO2, GFNs (pristine graphene, graphene oxide (GO), reduced GO, and graphene quantum dots (GQDs)), and GFN-TiO2 are presented. This review also explains practical synthesis techniques along with perspective characteristics of these TiO2- and/or graphene-based materials. The enhancement of the photocatalytic activity by using GFN-TiO2 and its improved photocatalytic reactions for the treatment of organic, inorganic, and biological pollutants in water and air phases are reported. It is expected that this review can provide insights into the key to optimizing the photocatalytic activity of GFN-TiO2 and possible directions for future development in these fields.

Preparation of Quantum Dot-Embedded Photonic Crystal Hydrogel and Its Application as Fluorescence Sensor for the Detection of Nitrite

The development of fluorescence sensing platforms with excellent photoluminescence capabilities is of great importance for their further application. In this work, a photonic crystal structure was successfully applied to enhance the luminescence performance of fluorescent hydrogel, and the application of the obtained hydrogel as a fluorescence sensor was explored. A polystyrene photonic crystal template was constructed via vertical deposition self-assembly; then, the precursor solution containing polyethylenimine-capped CdS quantum dots (PEI-CdS QDs) and monomers filled in the gap of the template. After the polymerization process, the desired hydrogel was obtained. PEI-CdS QDs endowed the hydrogel with its fluorescence property, while interestingly, the photonic crystal structure showed a significant enhancement effect on the fluorescence-emission capability. The mechanism of this phenomenon was revealed. Moreover, this hydrogel could be used as a reusable fluorescence sensor for the detection of nitrite in water with good selectivity. The limit of detection was determined to be 0.25 μmol/L, which is much lower than the maximum limit for nitrite in drinking water.

Recent advances in degradation of pharmaceuticals using Bi2WO6 mediated photocatalysis - A comprehensive review

The pollution of water bodies by residual pharmaceuticals is a major problem globally. Bismuth tungstate mediated photocatalysis has been effective in the removal of these organics from water. Bismuth tungstate (Bi₂WO₆) has proven to be an excellent visible light active photocatalyst because of its non-toxicity, low band gap energy and ease of preparation. It has been widely applied for the removal of a wide array of organic pollutants, particularly dyes, from wastewater. However, recently, much attention has been channelled to its application for the degradation of pharmaceuticals. In this present review, the recent trends in the applications of Bi₂WO₆ based photocatalysts for the removal of pharmaceuticals in wastewater are comprehensively discussed. The fabrication of Bi₂WO₆ based photocatalysts with enhanced photocatalytic performances through morphology control, doping and formation of heterojunctions are highlighted. Much discussion centres on the mechanisms and possible degradation pathways of antibiotic pharmaceuticals in wastewater. Finally, areas needing more attention and investigation on the use of Bi₂WO₆ based photocatalysts for removal of pharmaceuticals from wastewater especially towards real-life applications are presented for future research directions.

Gold nanostar@graphene quantum dot as a new colorimetric sensing platform for detection of cysteine

We here report on a facile method for preparation of gold nanostar-graphene quantum dot (AuNS@GQD) composite, which produces highly active surfactant-free AuNSs. The etching reaction of this composite with Na₂SO₃ was studied and used as a new sensing strategy for colorimetric detection of nM levels of cysteine. In the presence of Na₂SO₃, the shape of AuNSs changes to sphere-like nanoparticles, leading to a distinct color change of solution from light green to indigo. This phenomenon results from the redox reaction of Au atoms at the apexes and sharp corners of the NSs with oxygen which leads to the formation of [Au(SO₃)₂]^3-. Our studies indicated that the stars with larger sizes show greater activity in etching reaction since they have more branches and sharper tips. Due to the strong coordination between Au and thiols, pre-added cysteine can protect the AuNSs from SO₃^2- etching and so the shape and the color of AuNSs remain unaltered. This anti-etching effect was used for the detection of cysteine with the detection limit as low as 0.35 nM. The developed colorimetric sensor was validated by HPLC method and applied for analysis of human plasma samples.

Nanodots Derived from Layered Materials: Synthesis and Applications

Layered 2D materials, such as graphene, transition metal dichalcogenides, transition metal oxides, black phosphorus, graphitic carbon nitride, hexagonal boron nitride, and MXenes, have attracted intensive attention over the past decades owing to their unique properties and wide applications in electronics, catalysis, energy storage, biomedicine, etc. Further reducing the lateral size of layered 2D materials down to less than 10 nm allows for preparing a new class of nanostructures, namely, nanodots derived from layered materials. Nanodots derived from layered materials not only can exhibit the intriguing properties of nanodots due to the size confinement originating from the ultrasmall size, but also can inherit some unique properties of ultrathin layered 2D materials, making them promising candidates in a wide range of applications, especially in biomedicine and catalysis. Here, a comprehensive summary on the materials categories, advantages, synthesis methods, and potential applications of these nanodots derived from layered materials is provided. Finally, personal insights about the challenges and future directions in this promising research field are also given.

Carbon Dots: An Innovative Tool for Drug Delivery in Brain Tumors

Brain tumors are particularly aggressive and represent a significant cause of morbidity and mortality in adults and children, affecting the global population and being responsible for 2.6% of all cancer deaths (as well as 30% of those in children and 20% in young adults). The blood-brain barrier (BBB) excludes almost 100% of the drugs targeting brain neoplasms, representing one of the most significant challenges to current brain cancer therapy. In the last decades, carbon dots have increasingly played the role of drug delivery systems with theranostic applications against cancer, thanks to their bright photoluminescence, solubility in bodily fluids, chemical stability, and biocompatibility. After a summary outlining brain tumors and the current drug delivery strategies devised in their therapeutic management, this review explores the most recent literature about the advances and open challenges in the employment of carbon dots as both diagnostic and therapeutic agents in the treatment of brain cancers, together with the strategies devised to allow them to cross the BBB effectively.

Graphene quantum dots (GQDs) nanoarchitectonics for theranostic application in lung cancer

Lung cancer (LC) is heading up as a substantial cause of mortality worldwide. Despite enormous progress in cancer management, LC remains a crucial problem for oncologists due to the lack of early diagnosis and precise treatment. In this context, numerous early diagnosis and treatment approaches for LC at the cellular level have been developed using advanced nanomaterials in the last decades. Amongst this, graphene quantum dots (GQDs) as a novel fluorescent material overwhelmed the horizons of materials science and biomedical fields due to their multifunctional attributes. Considering the complex nature of LC, emerging diagnostic and therapeutic (Theranostics) strategies using GQDs proved to be an effective way for the current practice in LC. In this line, we have abridged various approaches used in the LC theranostics using GQDs and its surface-engineered motif. The admirable photophysical attributes of GQDs realised in photolytic therapy (PLT), hyperthermia therapy (HTT), and drug delivery have been discussed. Furthermore, we have engrossed the impasse and its effects on the use of GQDs in cancer treatments from cellular level (in vivo-in vitro) to clinical. Inclusively, this review will be an embodiment for the scientific fraternity to design and magnify their view for the theranostic application of GQDs in LC treatment.

One-Pot Synthesis of Bright Blue Luminescent N-Doped GQDs: Optical Properties and Cell Imaging

High fluorescent graphene quantum dots (GQDs) are promising in bioimaging and optoelectronics. In this paper, bright blue fluorescent N-doped GQDs were synthesized using a ultrasonic-assisted hydrothermal method. The morphology, structure, surface chemistry, optical properties, and stability subject to photo-bleaching, temperature, pH and preservation period for the N-GQDs were investigated in detail using various microscopy and spectroscopy techniques. The results showed that the N-GQDs possessed an average size of 2.65 nm, 3.57% N doping, and up to 54% quantum yield (QY). The photoluminescence (PL) spectra of the N-GQDs are excitation dependent when excited in the range of 300-370 nm and excitation independent in the range of 380-500 nm for the core and surface states emission. The N-GQDs showed excellent photo-bleaching resistance and superior photo-stability. At room temperature and in the pH range of 3-8, the fluorescence of the N-GQDs was almost invariable. The N-GQDs can be stably preserved for at least 40 days. The average decay lifetime of the N-GQDs was 2.653 ns, and the radiative and nonradiative decay rate constants were calculated to be 2.04 × 108 s-1 and 1.73 × 108 s-1, respectively. The PL mechanism was qualitatively explained. The N-GQDs was used for cell imaging, and it showed good results, implying great potential applications for bioimaging or biomarking.

Fabrication of a paper-based sensor from graphene quantum dots coated with a polymeric membrane for the determination of gold(III) ions

A novel paper-based sensor using graphene quantum dots (GQDs) as a colorimetric probe for Au³⁺ determination has been developed. The paper sensor was fabricated by the adsorption of GQDs onto cellulose filter paper and then coating with a PVC membrane. The PVC membrane was plasticized with o-NPOE containing potassium tetrakis(4-chlorophenyl)borate (KTpClPB) as a lipophilic cation-exchanger. According to the ion-exchanged mechanism between the lipophilic phase and aqueous phase, Au³⁺ in the aqueous solution was extracted to the lipophilic phase on the paper layer. Then, adsorbed GQDs on the paper could selectively reduce Au³⁺ to elemental gold (Au⁰). The generated gold nanoparticles (AuNPs) resulted in the color of the paper turning from pale yellow to pink, which was recorded by using CIE L*a*b* color space. Under optimized conditions, the change in the color difference (ΔE) was related to the concentration of Au³⁺ in a working linear range of 200-1000 μM and the detection limit was found to be 70 μM. The proposed sensor was successfully applied to the determination of Au³⁺ in real water samples. The results were in favorable agreement with standard inductively coupled plasma-optical emission spectrometry (ICP-OES) results.

Shedding Light on Graphene Quantum Dots: Key Synthetic Strategies, Characterization Tools, and Cutting-Edge Applications

During the last 20 years, the scientific community has shown growing interest towards carbonaceous nanomaterials due to their appealing mechanical, thermal, and optical features, depending on the specific nanoforms. Among these, graphene quantum dots (GQDs) recently emerged as one of the most promising nanomaterials due to their outstanding electrical properties, chemical stability, and intense and tunable photoluminescence, as it is witnessed by a booming number of reported applications, ranging from the biological field to the photovoltaic market. To date, a plethora of synthetic protocols have been investigated to modulate the portfolio of features that GQDs possess and to facilitate the use of these materials for target applications. Considering the number of publications and the rapid evolution of this flourishing field of research, this review aims at providing a broad overview of the most widely established synthetic protocols and offering a detailed review of some specific applications that are attracting researchers’ interest.

Towards single electron transistor-based photon detection with microplasma-enabled graphene quantum dots

Single-electron transistors (SETs) represent a new generation of electronic devices with high charge sensitivity, high switching speed, and low power consumption. Here a simple and controlled fabrication of graphene quantum dot (GQD)-based SETs for photon detectors has been demonstrated. The plasma-synthesized GQDs exhibit stable photoluminescence and are successfully used as the Coulomb islands between heteroepitaxial spherical-gold/platinum (HS-Au/Pt) nanogap electrodes. The as-fabricated GQD-SETs enable photon detection with 410 nm excitation owing to the ability of GQDs to generate photoluminescence emission.

Optical Properties of Carbon Dots in the Deep-Red to Near-Infrared Region Are Attractive for Biomedical Applications

Carbon dots (CDs) represent a recently emerged class of luminescent materials with a great potential for biomedical theranostics, and there are a lot of efforts to shift their absorption and emission toward deep-red (DR) to near-infrared (NIR) region falling in the biological transparency window. This review offers comprehensive insights into the synthesis strategies aimed to achieve this goal, and the current approaches of modulating the optical properties of CDs over the DR to NIR region. The underlying mechanisms of their absorption, photoluminescence, and chemiluminescence, as well as the related photophysical processes of photothermal conversion and formation of reactive oxygen species are considered. The already available biomedical applications of CDs, such as in the photoacoustic imaging and photothermal therapy, photodynamic therapy, and their use as bioimaging agents and drug carriers are then shortly summarized.

Structural features regulated photoluminescence intensity and cell internalization of carbon and graphene quantum dots for bioimaging

Carbon-based nanostructures with nanometer dimensions have been identified as potential photoluminescence probes for bioimaging due to their biocompatibility, tunable bandgap, and resistance to photobleaching. However, the influence of structural features of carbon quantum dots (CQDs) and graphene quantum dots (GQDs) in bioimaging has not been explored previously. In the present investigation, we elucidated the mechanism of higher PL in GQDs as compared to CQDs as a function of their structural features. TEM and AFM studies revealed that CQDs were spherical (size ~5 nm), while GQDs showed zigzag edges (size ~3 nm). Further, XRD and NMR studies confirmed that CQDs and GQDs show amorphous and crystalline structures with greater sp² clusters, respectively. While both the QDs demonstrated multicolor fluorescence against variable excitations with similar lifetime, GQDs showed 7-fold higher QY than CQDs. Bioimaging studies in 2D cell culture, 3D tumoroids, and in vivo suggested a greater intensity of fluorescence in GQDs than CQDs. Additionally, rapid cell internalization was observed in GQDs owing to their positive surface potential by heterogeneous atomic (N and S) doping. Moreover, both CQDs and GQDs have demonstrated better time dependent stability for fluorescence properties. Taken together, the proposed mechanism elucidates the greater PL intensity in GQDs due to quantum confinement effect, crystallinity, and surface edge effects and is a better candidate for bioimaging amongst the carbon family.

Influence of carbon nano-dots in water on sonoluminescence

Sonoluminescence (SL) occurs when acoustically induced oscillating bubbles in a liquid collapse. The SL from pure water normally generates ultraviolet to blue emission which is related to hydroxyl plasma formed in and around the bubbles. It is known that carbon nano-dots (CNDs) can serve as free radical captors, where the C-bonds can couple strongly with free radicals and form C-based functional groups. In this work, a SL experiment is conducted via placing CND aqueous solution (CNDAS) in the focal area of the SL apparatus. Unexpectedly and dramatically, it is found that the color of SL now turns orange, which is so bright that it can be seen even by the naked eye. By examining the CNDAS before and after the SL experiment, it is observed that the influence of CNDs on optical absorption, photoluminescence and SL is mainly achieved via coupling between the C-bonds in the CNDs and the free hydroxyl radicals generated during the processes of acoustically driven cavitation and SL. The interesting and important findings from this work demonstrate that the CNDs in water can modify significantly the SL effect. Thus, CNDs can provide a new test medium for studying and revealing the microscopic mechanism of the SL phenomenon.

Graphene Quantum Dots-Based Nanocomposites Applied in Electrochemical Sensors: A Recent Survey

Graphene quantum dots (GQDs) have been widely investigated in recent years due to their outstanding physicochemical properties. Their remarkable characteristics allied to their capability of being easily synthesized and combined with other materials have allowed their use as electrochemical sensing platforms. In this work, we survey recent applications of GQDs-based nanocomposites in electrochemical sensors and biosensors. Firstly, the main characteristics and synthesis methods of GQDs are addressed. Next, the strategies generally used to obtain the GQDs nanocomposites are discussed. Emphasis is given on the applications of GQDs combined with distinct 0D, 1D, 2D nanomaterials, metal-organic frameworks (MOFs), molecularly imprinted polymers (MIPs), ionic liquids, as well as other types of materials, in varied electrochemical sensors and biosensors for detecting analytes of environmental, medical, and agricultural interest. We also discuss the current trends and challenges towards real applications of GQDs in electrochemical sensors.

Graphene Quantum Dots for Molecular Radiotherapy: Radiolabeled Graphene Quantum Dots with Radium (223Ra) Showed Potent Effect Against Bone Cancer

The necessity of new drugs with special attention for the therapy of cancer is increasing each day. Despite their properties, alpha therapeutic radiopharmaceuticals, especially based on the use of radium (²²³Ra) are good choices, due to the highest and differential cytotoxicity, low adverse effects, and higher bioaccumulation on tumor sites. The use of graphene quantum dots as the carrier for ²²³Ra is a promising approach since graphene quantum dots has low toxicity, high biocompatibility, and adequate size for tumor penetration. In this study, we developed, characterized, radiolabeled with ²²³Ra, and evaluated in vitro and in vivo graphene quantum dots radiolabeled with radium (²²³Ra) for bone cancer. The results showed that ²²³Ra is incorporated into the graphene quantum dot following the Fajans-Paneth-Hahn Law. The cell viability showed a potent effect on osteosarcoma cells (MG63 and SAOS2) but a lower effect in normal fibroblast cells (hFB), corroborating the preferential targeting. Also, the results showed a more prominent effect on MG63 than SAOS2 cells, corroborating the targeting for more undifferentiated cells. The in vivo results demonstrated a renal excretion, associated with fecal excretion and accumulation in bone. The results corroborate the efficacy of ²²³RaGQDs and open new perspectives for the use of use ²²³RaGQDs, in several other diseases.

Pivotal Role of Quantum Dots in the Advancement of Healthcare Research

The quantum dot is a kind of nanoparticle whose dimension is smaller than the size of a typical nanoparticle ranging from tens of nanometers to a few hundredths of nanometers. The quantum mechanical behavior associated with the quantum dot displays different optical and electronic properties, enabling the quantum dot to find potential applications in a multitude of areas such as solar cells, light-emitting diodes, lasers, and biomedical applications. The objective of this investigation is to explore its fundamentals, synthesis, and applications, especially in the healthcare domain. We have discussed the quantum dot synthesis techniques using chemical methods, namely, wet-chemical methods and vapor-phase methods and plasma processing methods, namely, an ion sputtering method and plasma-enhanced chemical vapor deposition method. We have thoroughly investigated the application of quantum dots in imaging, diagnostics, and gene therapy areas. A significant outcome of this review is to propose quantum dots as a new modality in the treatment of cancer and gene therapeutics in the healthcare domain and the potentials of artificial intelligence to improve their performance via the applications of neural networks.

Red Emission Carbon Dots Prepared by 1,4-Diaminonaphthalene for Light-Emitting Diode Application and Metal Ion Detection

Carbon dots (CDs), as the most important type of carbon materials, have been widely used in many fields because of their unique fluorescence characteristics and excellent properties of biocompatibility. In previous studies, the fluorescence of CDs was mainly concentrated in the blue and green, whereas the red fluorescence was relatively less. Herein, we prepared efficient red-emitting CDs from 1,4-diaminonaphthalene using solvothermal methods. We discussed the effects of different solvothermal solvents on CDs. The results show that CDs prepared with octane and acetone as reaction media have the best fluorescence properties. The CDs dispersed in different organic solvents exhibited tunable emission across a wide spectrum from 427 nm to 679 nm. We further demonstrated the application of red light-emitting diode (LED) optoelectronics and fluorescence detection of Fe3+ in aqueous solution.

Green synthesis of white light emitting carbon quantum dots: Fabrication of white fluorescent film and optical sensor applications

In this work, we have reported on the facile synthesis of white light-emitting carbon quantum dots (CQD) from corncob by hydrothermal method. This CQD has a broad emission from 380 nm to 650 nm with high photoluminescence intensity even after three months of shelf-life and stable at variable pH conditions. The presence of Si and N impurities in the biomass gives a greater advantage in producing white light emission with high quantum yield (54%) and enhanced lifetime at ambient conditions. The CQD is highly sensitive towards DNA, paracetamol, Pb²⁺, Cu²⁺, Fe³⁺, and Cr³⁺ fluorescence sensing and signifies its application as a multi-modal fluorescence sensor. The results of optical sensitivity calculated from the linear range of 1-10 ng/mL, 0.10-0.30 mg/mL, 2.5446 ng/mL, 0.0694 mg/mL, 0.3103-1.5515 μM/mL, 0.4299-4.7293 μM/mL, 1.3010 μM/mL and 0.05-2.5 μM/mL. The limit of detection is 2.5446 ng/mL, 0.0694 mg/mL, 0.8641 μM/mL, 1.2454 μM/mL, 1.3010 μM/m, 0.8550 μM/mL and 2.8562 μM/mL, respectively. And also, the relative standard deviation values of 2.30%, 4.46%, 1.79%, 1.84%, 0.26%, 1.23% and 0.35% are evidences its possibility of development towards potential optical sensor applications. Flexible white light-emitting sheets were fabricated from the CQD, illuminates uniform brightness, and has good color reproducibility and higher stability under various UV light excitation.

The selective deprotonation of carbon quantum dots for fluorescence detection of phosphate and visualization of latent fingerprints

We developed a water-soluble, stable and selective "turn-on" fluorescence sensing platform based on carbon quantum dots (CQDs) for rapid determination of phosphate (Pi) in aqueous solutions and for visualization of latent fingerprints on paper. The hydroxyl groups on the surface of the synthesized CQDs can be deprotonated by Pi to trigger the intramolecular charge transfer (ICT) process and the inhibition of excited-state proton transfer (ESPT), achieving a turn-on emission response. CQDs demonstrated the capability to selectively detect Pi over other common ions and biomolecules with the linear fluorescence intensity change in the range from 0 to 100 μM. Moreover, the paper sprayed with the CQD solution showed a remarkable blue emission speckle and a fingerprint upon addition of Pi solution and finger touching, respectively. Notably, the fingerprint images including level 3 details (crossover, bifurcation, termination, and island and sweat pores) are also clearly identified and distinguished, indicating their potential application in document security. We believe that the as-synthesized CQDs will provide a new tool for Pi detection in aqueous media and paper document security.

Red, green, and blue light-emitting carbon dots prepared from o-phenylenediamine

Carbon dots (CDs), as the most important type of carbon-based material, have been widely used in many fields because of their excellent properties. In particular, multicolor fluorescent CDs with high photoluminescence quantum yield are the focus of active research. Herein, red, green and blue CDs (RGB CDs) were successfully synthesized by a solvothermal method from o-phenylenediamine under different reaction conditions. The RGB-CDs have stable optical properties and significant photoluminescence characteristics. Structural and elemental analyses propose a conjugated structure and the surface state of the CDs as the main causes for the different color emission of RGB-CDs. In addition, a white fluorescent CD solution was prepared by mixing these multicolor fluorescent CDs in appropriate proportions.

Red, green and blue CDs (RGB CDs) were successfully synthesized by a solvothermal method from o-phenylenediamine under different reaction conditions.

[Application of carbon dots in analysis and detection of antibiotics]

Antibiotics have been overused in recent years because of their remarkable curative effect, but this has led to considerable environmental pollution. Therefore, the development of approaches aimed at the effective detection and control of the antibiotics is vital for protecting the environment and human health. Many conventional strategies (such as high-performance liquid chromatography (HPLC), gas chromatography (GC), high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS)) are currently in use for the detection of antibiotics. These strategies have aroused a great deal of interest because of their outstanding features of high efficiency and speed, good reproducibility, automation, etc. However, various problems such as tedious sample pretreatment, low detection sensitivity, and high cost must be overcome for the effective detection of antibiotics in environmental samples. Consequently, it is of great significance to improve the detection sensitivity of antibiotics. The development of new materials combined with the existing detection technology has great potential to improve the detection results for antibiotics. Carbon dots (CDs) are a new class of nanomaterials with particle sizes in the range of 0-10 nm. In addition, CDs have desirable properties such as small particle effect, excellent electrical properties, unique optical properties, and good biocompatibility. Hence, they have been widely utilized for the detection of antibiotics in environmental samples. In this review, the application of CDs combined with sensors and chromatographic technology for the detection of antibiotics in the last five years are summarized. The development prospects of CD-based materials and their application to the analysis and detection of antibiotics are presented. In this review, many new sensors (CDs combined with molecularly imprinted polymer sensors, aptamer sensors, electrochemiluminescence sensors, fluorescence sensors, and electrochemical sensors) combined with CD-based materials and their use in the detection of antibiotics are summarized. Furthermore, advanced analysis methods such as ratiometric sensor and array sensor methods are reviewed. The novel analysis methods provide a new direction toward the detection of antibiotics by CDs combined with a sensor. Moreover, CD-based chromatographic stationary phases for the separation of antibiotics are also summarized in this manuscript. It is reported that the detection sensitivity for antibiotics can be greatly improved by the combination of CDs and a sensor. Nevertheless, a literature survey reveals that the detection of antibiotics in complex environmental samples is confronted with numerous challenges, including the fabrication of highly sensitive sensors in combination with CDs. Furthermore, the development of novel high-performance materials is of imperative. In addition, it is important to develop new methods for effective data processing. The separation of antibiotics with CDs as the chromatographic stationary phases is in the preliminary stage, and the separation mechanism remains to be clarified. In conclusion, there are still many problems to be overcome when using CDs as novel materials for the detection of antibiotics in environmental samples. Nowadays, CD-based materials are being intensively studied, and various analytical detection technologies are being rapidly developed. In the future, CD-based materials are expected to play an important role in the detection of antibiotics and other environmental pollutants.

Carbon dots: synthesis, properties and biomedical applications

Carbon dots (CDs) are a new type of carbon nanomaterial that have unique physical and chemical properties, good biocompatibility, low toxicity, and easy surface functionalization, making them widely used in biological imaging, environmental monitoring, chemical analysis, targeted drug delivery, disease diagnosis, therapy, etc. In this review, our content is mainly divided into four parts. In the first part, we focused on the preparation methods of CDs, including arc discharge, laser ablation, electrochemical oxidation, chemical oxidation, combustion, hydrothermal/solvent thermal, microwave, template, method etc. Next, we summarized methods of CD modification, including heteroatom doping and surface functionalization. Then, we discussed the optical properties of CDs (ultraviolet absorption, photoluminescence, up-conversion fluorescence, etc.). Lastly, we reviewed the common applications of CDs in biomedicine from the aspects of in vivo and in vitro imaging, sensors, drug delivery, cancer theranostics, etc. Furthermore, we also discussed the existing problems and the future development direction of CDs.

Comparison of the Toxicity of Pristine Graphene and Graphene Oxide, Using Four Biological Models

There are numerous applications of graphene in biomedicine and they can be classified into several main areas: delivery systems, sensors, tissue engineering and biological agents. The growing biomedical field of applications of graphene and its derivates raises questions regarding their toxicity. We will demonstrate an analysis of the toxicity of two forms of graphene using four various biological models: zebrafish (Danio rerio) embryo, duckweed (Lemna minor), human HS-5 cells and bacteria (Staphylococcus aureus). The toxicity of pristine graphene (PG) and graphene oxide (GO) was tested at concentrations of 5, 10, 20, 50 and 100 µg/mL. Higher toxicity was noted after administration of high doses of PG and GO in all tested biological models. Hydrophilic GO shows greater toxicity to biological models living in the entire volume of the culture medium (zebrafish, duckweed, S. aureus). PG showed the highest toxicity to adherent cells growing on the bottom of the culture plates—human HS-5 cells. The differences in toxicity between the tested graphene materials result from their physicochemical properties and the model used. Dose-dependent toxicity has been demonstrated with both forms of graphene.

The facile formation of hierarchical mesoporous silica nanocarriers for tumor-selective multimodal theranostics

The combination of therapeutic and diagnostic functions in a single platform has aroused great interest due to the more optimal synergistic effects that can be obtained as compared to any single theranostic approach alone. However, current nanotheranostics are normally formed via complicated construction steps involving the pre-synthesis of each component and further conjugation via chemical bonds, which may cause low integration efficiency and limit production and applications. Herein, a tumor-targeting and tumor-responsive all-in-one nanoplatform based on mesoporous silica nanocarriers (MSNs) was fabricated via a facile approach utilizing efficient and nondestructive physical interactions for long-wavelength fluorescence imaging-guided synergistic chemo-catalytic-photothermal tumor therapy. The MSNs were endowed with these multimodal theranostics via a simple hydrothermal method after coordinating with Fe2+ and glutathione (GSH) to introduce ferroferric oxide and carbon dots in situ. The former acts as a photothermal agent and catalytic agent to generate local heat under 808 nm irradiation and also when toxic hydroxyl radicals (˙OH) are in contact with abundant hydrogen peroxide in cancer cells, while the latter participates in fluorescence imaging. After loading with paclitaxel (PTX), polyester and folic-acid-conjugated cyclodextrin were employed to serve as an esterase-sensitive gatekeeper controlling PTX release from the MSN pores and as a tumor-targeting agent for accurate therapy, respectively. As expected, the nanoplatform was efficiently taken up by tumor cells over healthy cells, and then, synergetic chemo-catalytic-photothermal therapy was performed, resulting in 5-fold greater apoptosis of tumor cells as compared to healthy cells under 808 nm irradiation. Moreover, in vivo data from tumor-bearing mouse models showed that tumors were significantly inhibited, and the survival rates of these mice increased to greater than 80% after 5 weeks of treatment with our nanoplatform. These therapeutic processes could be directly tracked via fluorescence imaging enabled by carbon dots and, therefore, our nanoplatform provides a promising theranostics approach for tumor treatment.

Quantum dot biosensor combined with antibody and aptamer for tracing food-borne pathogens

Due to the increasing number of food-borne diseases, more attention is being paid to food safety. Food-borne pathogens are the main cause of food-borne diseases, which seriously endanger human health, so it is necessary to detect and control them. Traditional detection methods cannot meet the requirements of rapid detection of food due to many shortcomings, such as being time-consuming, laborious or requiring expensive instrumentation. Quantum dots have become a promising nanotechnology in pathogens tracking and detection because of their excellent optical properties. New biosensor detection methods based on quantum dots are have been gradually developed due to their high sensitivity and high specificity. In this review, we summarize the different characteristics of quantum dots synthesized by carbon, heavy metals and composite materials firstly. Then, attention is paid to the principles, advantages and limitations of the quantum dots biosensor with antibodies and aptamers as recognition elements for recognition and capture of food-borne pathogens. Finally, the great potential of quantum dots in pathogen detection is summarized.

Facile Synthesis of L-Cysteine Functionalized Graphene Quantum Dots as a Bioimaging and Photosensitive Agent

Nowadays, a larger number of aggressive and corrosive chemical reagents as well as toxic solvents are used to achieve structural modification and cleaning of the final products. These lead to the production of residual, waste chemicals, which are often reactive, cancerogenic, and toxic to the environment. This study shows a new approach to the modification of graphene quantum dots (GQDs) using gamma irradiation where the usage of reagents was avoided. We achieved the incorporation of S and N atoms in the GQD structure by selecting an aqueous solution of L-cysteine as an irradiation medium. GQDs were exposed to gamma-irradiation at doses of 25, 50 and 200 kGy. After irradiation, the optical, structural, and morphological properties, as well as the possibility of their use as an agent in bioimaging and photodynamic therapy, were studied. We measured an enhanced quantum yield of photoluminescence with the highest dose of 25 kGy (21.60%). Both S- and N-functional groups were detected in all gamma-irradiated GQDs: amino, amide, thiol, and thione. Spin trap electron paramagnetic resonance showed that GQDs irradiated with 25 kGy can generate singlet oxygen upon illumination. Bioimaging on HeLa cells showed the best visibility for cells treated with GQDs irradiated with 25 kGy, while cytotoxicity was not detected after treatment of HeLa cells with gamma-irradiated GQDs.

Carbon Dots as an Emergent Class of Antimicrobial Agents

Antimicrobial resistance is a recognized global challenge. Tools for bacterial detection can combat antimicrobial resistance by facilitating evidence-based antibiotic prescribing, thus avoiding their overprescription, which contributes to the spread of resistance. Unfortunately, traditional culture-based identification methods take at least a day, while emerging alternatives are limited by high cost and a requirement for skilled operators. Moreover, photodynamic inactivation of bacteria promoted by photosensitisers could be considered as one of the most promising strategies in the fight against multidrug resistance pathogens. In this context, carbon dots (CDs) have been identified as a promising class of photosensitiser nanomaterials for the specific detection and inactivation of different bacterial species. CDs possess exceptional and tuneable chemical and photoelectric properties that make them excellent candidates for antibacterial theranostic applications, such as great chemical stability, high water solubility, low toxicity and excellent biocompatibility. In this review, we will summarize the most recent advances on the use of CDs as antimicrobial agents, including the most commonly used methodologies for CD and CD/composites syntheses and their antibacterial properties in both in vitro and in vivo models developed in the last 3 years.

Photoluminescent Nanoparticles for Chemical and Biological Analysis and Imaging

Research related to the development and application of luminescent nanoparticles (LNPs) for chemical and biological analysis and imaging is flourishing. Novel materials and new applications continue to be reported after two decades of research. This review provides a comprehensive and heuristic overview of this field. It is targeted to both newcomers and experts who are interested in a critical assessment of LNP materials, their properties, strengths and weaknesses, and prospective applications. Numerous LNP materials are cataloged by fundamental descriptions of their chemical identities and physical morphology, quantitative photoluminescence (PL) properties, PL mechanisms, and surface chemistry. These materials include various semiconductor quantum dots, carbon nanotubes, graphene derivatives, carbon dots, nanodiamonds, luminescent metal nanoclusters, lanthanide-doped upconversion nanoparticles and downshifting nanoparticles, triplet-triplet annihilation nanoparticles, persistent-luminescence nanoparticles, conjugated polymer nanoparticles and semiconducting polymer dots, multi-nanoparticle assemblies, and doped and labeled nanoparticles, including but not limited to those based on polymers and silica. As an exercise in the critical assessment of LNP properties, these materials are ranked by several application-related functional criteria. Additional sections highlight recent examples of advances in chemical and biological analysis, point-of-care diagnostics, and cellular, tissue, and in vivo imaging and theranostics. These examples are drawn from the recent literature and organized by both LNP material and the particular properties that are leveraged to an advantage. Finally, a perspective on what comes next for the field is offered.

Synthesis and modification of carbon dots for advanced biosensing application

There has been an explosion of interest in the use of nanomaterials for biosensing applications, and carbonaceous nanomaterials in particular are at the forefront of this explosion. Carbon dots (CDs), a new type of carbon material, have attracted extensive attention due to their fascinating properties, such as small particle size, tunable optical properties, good conductivity, low cytotoxicity, and good biocompatibility. These properties have enabled them to be highly promising candidates for the fabrication of various high-performance biosensors. In this review, we summarize the top-down and bottom-up synthesis routes of CDs, highlight their modification strategies, and discuss their applications in the fields of photoluminescence biosensors, electrochemiluminescence biosensors, chemiluminescence biosensors, electrochemical biosensors and fluorescence biosensors. In addition, the challenges and future prospects of the application of CDs for biosensors are also proposed.

Design and In-silico study of bioimaging fluorescence Graphene quantum dot-Bovine serum albumin complex synthesized by diimide-activated amidation

Graphene quantum dot possesses advantageous characteristics like tunable fluorescence, nanometer size, low cytotoxicity, high biocompatibility enabling them as an ideal material for fluorescence bio-imaging. It exhibits a unique characteristic of DNA cleavage activity enhancer, gene/drug carrier, and anticancer targeting applications. In this article, we discussed the preparation of graphene quantum dot through the bottom-up method. Carbodiimide-activated amidation reactions were used for the functionalization of graphene quantum dot with Bovine Serum Albumin. Fluorescence spectroscopy data showed that the graphene quantum dot has size-dependent fluorescence emission. TEM and AFM studies showed that the size of graphene quantum dot was around 20 nm with narrow size distribution. Carbodiimide-activated amidation conjugation was successful in binding the protein onto graphene quantum dot and these conjugates were characterized by DLS, FTIR, fluorescence spectroscopy, and agarose gel electrophoresis. We also studied the structural-based in-silico molecular dynamic simulation by AutoDock, PyRx, and Discovery Studio Visualizer. Based on the virtual screening analysis and higher negative energy incorporation, it is observed that graphene quantum dot conjugated with bovine serum albumin quickly and formed is highly stable complex, which makes them a potential candidate for future applications in the field of bio-imaging, bio-sensing, gene/drug delivery, and tumor theragnostic.

Technical textiles modified with immobilized carbon dots synthesized with infrared assistance

Carbon quantum dots "CQDs" were investigated as photo-luminescent nanomaterials as it advantageous with nontoxicity to be alternative for metallic-nanomaterials in different purposes. Therefore, the presented report demonstrates an innovative strategy for industrialization of antimicrobial/fluorescent cotton textiles via exploitation of "CQDs". Unique/novel infrared-assisted technique was currently investigated for clustering "CQDs" form carboxymethyl cellulose. The successive nucleation of "CQDs" (8.0 nm) was affirmed via infra-red, Raman spectroscopy, NMR, TEM and Zeta-potential analysis. The clustered "CQDs" showed antimicrobial and fluorescent characters. The minimal inhibition concentration for "CQDs" (100 mg/mL) against E. coli and C. albicans showed pathogenic reduction of 96% and 82%, respectively. Fluorescent emission spectra for "CQDs" showed two intense peaks at 415-445 nm. "CQDs" were loaded upon pristine and cationized cotton to prepare CQDs@cotton and CQDs@cationized cotton. While, their physical/mechanical properties (air and water vapor permeabilities, tensile strength and elongation %) and thermal stability (TGA & DTG analysis) were studied. The CQDs@cationized cotton exhibited excellent antimicrobial activity with good durability as after ten repretitive washings, inhibition zone diameter against E. coli, was diminished from 21.0 mm to 14.0 mm. The fluorescent emmision intensity was diminished from 741 to 287 after 10 washing cycles. The produced cotton fabrics could be safely used in the medical and military textiles.

N-Doped Carbon Quantum Dots as Fluorescent Bioimaging Agents

Graphene quantum dots, carbon nanomaterials with excellent fluorescence characteristics, are advantageous for use in biological systems owing to their small size, non-toxicity, and biocompatibility. We used the hydrothermal method to prepare functional N-doped carbon quantum dots (N-CQDs) from 1,3,6-trinitropyrene and analyzed their ability to fluorescently stain various bacteria. Our results showed that N-CQDs stain the cell septa and membrane of the Gram-negative bacteria Escherichia coli, Salmonellaenteritidis, and Vibrio parahaemolyticus and the Gram-positive bacteria Bacillus subtilis, Listeria monocytogenes, and Staphylococcus aureus. The optimal concentration of N-CQDs was approximately 500 ppm for Gram-negative bacteria and 1000 ppm for Gram-positive bacteria, and the exposure times varied with bacteria. N-Doped carbon quantum dots have better light stability and higher photobleaching resistance than the commercially available FM4-64. When excited at two different wavelengths, N-CQDs can emit light of both red and green wavelengths, making them ideal for bioimaging. They can also specifically stain Gram-positive and Gram-negative bacterial cell membranes. We developed an inexpensive, relatively easy, and bio-friendly method to synthesize an N-CQD composite. Additionally, they can serve as a universal bacterial membrane-staining dye, with better photobleaching resistance than commercial dyes.

Quantum dots as a theranostic approach in Alzheimer's disease: a systematic review

Aim: Quantum dots (QDs) are nanoparticles that have an emerging application as theranostic agents in several neurodegenerative diseases. The advantage of QDs as nanomedicine is due to their unique optical properties that provide high sensitivity, stability and selectivity at a nanoscale range. Objective: To offer renewed insight into current QD research and elucidate its promising application in Alzheimer's disease (AD) diagnosis and therapy. Methods: A comprehensive literature search was conducted in PubMed and Google Scholar databases that included the following search terms: 'quantum dots', 'blood-brain barrier', 'cytotoxicity', 'toxicity' and 'Alzheimer's disease'; PRISMA guidelines were adhered to. Results: Thirty-four publications were selected to evaluate the ability of QDs to cross the blood-brain barrier, potential toxicity and current AD diagnostic and therapeutic applications. Conclusion: QD's unique optical properties and versatility to conjugate to various biomolecules, while maintaining a nanoscale size, render them a promising theranostic tool in AD.

Multifaceted Regulation of Potassium-Ion Channels by Graphene Quantum Dots

Graphene quantum dots (GQDs) are emerging as a versatile nanomaterial with numerous proposed biomedical applications. Despite the explosion in potential applications, the molecular interactions between GQDs and complex biomolecular systems, including potassium-ion (K+) channels, remain largely unknown. Here, we use molecular dynamics (MD) simulations and electrophysiology to study the interactions between GQDs and three representative K+ channels, which participate in a variety of physiological processes and are closely related to many disease states. Using MD simulations, we observed that GQDs adopt distinct contact poses with each of the three structurally distinct K+ channels. Our electrophysiological characterization of the effects of GQDs on channel currents revealed that GQDs interact with the extracellular voltage-sensing domain (VSD) of a Kv1.2 channel, augmenting current by left-shifting the voltage dependence of channel activation. In contrast, GQDs form a "lid" cluster over the extracellular mouth of inward rectifier Kir3.2, blocking the channel pore and decreasing the current in a concentration-dependent manner. Meanwhile, GQDs accumulate on the extracellular "cap domain" of K2P2 channels and have no apparent impact on the K+ flux through the channel. These results reveal a surprising multifaceted regulation of K+ channels by GQDs, which might help de novo design of nanomaterial-based channel probe openers/inhibitors that can be used to further discern channel function.

Fluorescent nanoparticles as tools in ecology and physiology

Fluorescent nanoparticles (FNPs) have been widely used in chemistry and medicine for decades, but their employment in biology is relatively recent. Past reviews on FNPs have focused on chemical, physical or medical uses, making the extrapolation to biological applications difficult. In biology, FNPs have largely been used for biosensing and molecular tracking. However, concerns over toxicity in early types of FNPs, such as cadmium-containing quantum dots (QDs), may have prevented wide adoption. Recent developments, especially in non-Cd-containing FNPs, have alleviated toxicity problems, facilitating the use of FNPs for addressing ecological, physiological and molecule-level processes in biological research. Standardised protocols from synthesis to application and interdisciplinary approaches are critical for establishing FNPs in the biologists' tool kit. Here, we present an introduction to FNPs, summarise their use in biological applications, and discuss technical issues such as data reliability and biocompatibility. We assess whether biological research can benefit from FNPs and suggest ways in which FNPs can be applied to answer questions in biology. We conclude that FNPs have a great potential for studying various biological processes, especially tracking, sensing and imaging in physiology and ecology.

Photoluminescence quenching of thermally treated waste-derived carbon dots for selective metal ion sensing

In the present study, carbon-dots (CDs) were derived from the thermal oxidation of an agricultural waste, bitter tea residue, to obtain different sp²/sp³ ratios and electronic structures for metal sensing. The CDs obtained from calcination at 700 °C exhibited the highest photoluminescence (PL) quantum yield (QY) of 11.8% among all the samples treated at different temperatures. These CDs had a high degree of graphitization, which resulted in a strong π-π* electron transition, and hence in a high QY. The strong photoluminescence of the CDs could be used to sense the metal ions Ag⁺, Sr²⁺, Fe²⁺, Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, and Sn²⁺ by monitoring their PL intensity at an excitation wavelength of 320 nm. The metals inhibited the PL intensity in the order Ag⁺ > Fe²⁺, Fe³⁺, Ni²⁺ > Sr²⁺, Co²⁺, Cu²⁺, Sn²⁺, which demonstrated that the CDs exhibited high metal ion detection capability and selectivity. The detection of Fe³⁺ using CDs was performed in the range of 10-100 ppm with a LOD (limit of detection) value of 0.380 ppm. Theoretical calculations demonstrated that Ag⁺, Sr²⁺, and Sn²⁺ induced charge transfer excitation and that Fe²⁺ and Ni²⁺ induced d-d transitions via complexation with the sp² clusters. The charge transfer excitation and d-d transitions hindered the π-π* transition of the sp² clusters, leading to a quenching effect. On the other hand, Li⁺, Na⁺, and K⁺ ions did not alter the π-π* transition of the sp² clusters, resulting in a negligible quenching effect. In summary, the oxidation level and electronic structure of CDs derived from bitter tea residue could be tailored, and the CDs were shown to be a facile, sustainable, and eco-friendly material for metal sensing.

Sulfonated glycosaminoglycan bioinspired carbon dots for effective cellular labelling and promotion of the differentiation of mesenchymal stem cells

Although carbon dots (CDs) have been synthesized and applied in a variety of biological fields, such as disease diagnosis and gene/drug delivery, the exploration of facile bioinspired synthesis and applications of CDs is still of great significance. Particularly, recent increasing research has clearly confirmed that nanomaterials can affect a series of physiological behaviors and functions of mesenchymal stem cells (MSCs) (e.g., differentiation and pluripotency). Therefore, it is very important to develop multifunctional nanomaterials to simultaneously realize the cellular labelling and regulation of MSC behaviors in practical applications. Herein, sulfonated glycosaminoglycan-bioinspired CDs as bi-functional nanomaterials were ingeniously designed for cellular imaging and promoting the differentiation of rat bone MSCs (rBMSCs) in different culture media, which simultaneously met the two fundamental requirements in the field of MSC-based treatments (e.g., precisely directing the differentiation of MSCs and effective cellular labeling). These bifunctional CDs were successfully prepared via one-pot hydrothermal synthesis by using d-glucosamine hydrochloride (GA·HCl) and sodium p-styrenesulfonate (NaSS) as the reactants. The synthesized CDs with a uniform particle size (around 4 nm) dispersed well in aqueous solutions and exhibited remarkable fluorescence stability under different conditions. Additionally, cell viability and proliferation results demonstrated that the CDs possessed good biocompatibility, having negligible effects on the self-renewal potential of rBMSCs. The as-prepared CDs presented a cytoplasmatic distribution after being ingested by rBMSCs; thus, they are particularly suitable for cellular imaging. More importantly, the addition of CDs to osteogenic and chondrogenic induction media (OIM and CIM), respectively, was capable of effectively promoting the osteogenic and chondrogenic differentiation of rBMSCs due to the generation of reactive oxygen species (ROS) while having no influence on their pluripotency. In brief, this study not only implements a cellular labeling method based on CDs that were synthesized by a biomimicking strategy, but also paves a new way to regulate the differentiation of MSCs by designing multifunctional nanomaterials; this will enable the extensive development of facile synthesis methods and new applications of CDs and will also provide some research foundations for MSC-based fields.