Cellulosomes: plant-cell-wall-degrading enzyme complexes

Paradoxical conservation of a set of three cellulose-targeting genes in Mycobacterium tuberculosis complex organisms

The genome of the tuberculosis agent Mycobacterium tuberculosis encodes a putative cellulose-binding protein (CBD2), one candidate cellulase (Cel12), and one fully active cellulase (Cel6). This observation is puzzling, because cellulose is a major component of plant cell walls, whereas M. tuberculosis is a human pathogen without known contact with plants. In order to investigate the biological role of such cellulose-targeting genes in M. tuberculosis we report here the search for and transcription analysis of this set of genes in the genus Mycobacterium. An in silico search for cellulose-targeting orthologues found that only 2.5 % of the sequenced bacterial genomes encode the Cel6, Cel12 and CBD2 gene set simultaneously, including those of the M. tuberculosis complex (MTC) members. PCR amplification and sequencing further demonstrated the presence of these three genes in five non-sequenced MTC bacteria. Among mycobacteria, the combination of Cel6, Cel12 and CBD2 was unique to MTC members, with the exception of Mycobacterium bovis BCG Pasteur, which lacked CBD2. RT-PCR in M. tuberculosis H37Rv indicated that the three cellulose-targeting genes were transcribed into mRNA. The present work shows that MTC organisms are the sole mycobacteria among very few organisms to encode the three cellulose-targeting genes CBD2, Cel6 and Cel12. Our data point toward a unique, yet unknown, relationship with non-plant cellulose-producing hosts such as amoebae.

Cohesin diversity revealed by the crystal structure of the anchoring cohesin from Ruminococcus flavefaciens

The cellulosome is an intriguing multienzyme complex found in cellulolytic bacteria that plays a key role in the degradation of plant cell-wall polysaccharides. In Ruminococcus flavefaciens, a predominant fiber-degrading bacterium found in ruminants, the cellulosome is anchored to the bacterial cell wall through a relatively short ScaE scaffoldin. Determination of the crystal structure of the lone type-III ScaE cohesin from R. flavefaciens (Rf-CohE) was initiated as a part of a structural effort to define cellulosome assembly. The structure was determined at 1.95 A resolution by single-wavelength anomalous diffraction. This is the first detailed description of a crystal structure for a type-III cohesin, and its features were compared with those of the known type-I and type-II cohesin structures. The Rf-CohE module folds into a nine-stranded beta-sandwich with jellyroll topology, typically observed for cohesins, and includes two beta-flaps in the midst of beta-strands 4 and 8, similar to the type-II cohesin structures. However, the presence in Rf-CohE of an additional 13-residue alpha-helix located between beta-strands 8 and 9 represents a dramatic divergence from other known cohesin structures. The prominent alpha-helix is enveloped by an extensive N-terminal loop, not observed in any other known cohesin, which embraces the helix presumably enhancing its stability. A planar surface at the upper portion of the front face of the molecule, bordered by beta-flap 8, exhibits plausible dimensions and exposed amino acid residues to accommodate the dockerin-binding site.

The noncellulosomal family 48 cellobiohydrolase from Clostridium phytofermentans ISDg: heterologous expression, characterization, and processivity

Family 48 glycoside hydrolases (cellobiohydrolases) are among the most important cellulase components for crystalline cellulose hydrolysis mediated by cellulolytic bacteria. Open reading frame (Cphy_3368) of Clostridium phytofermentans ISDg encodes a putative family 48 glycoside hydrolase (CpCel48) with a family 3 cellulose-binding module. CpCel48 was successfully expressed as two soluble intracellular forms with or without a C-terminal His-tag in Escherichia coli and as a secretory active form in Bacillus subtilis. It was found that calcium ion enhanced activity and thermostability of the enzyme. CpCel48 had high activities of 15.1 U micromol(-1) on Avicel and 35.9 U micromol(-1) on regenerated amorphous cellulose (RAC) with cellobiose as a main product and cellotriose and cellotetraose as by-products. By contrast, it had very weak activities on soluble cellulose derivatives (e.g., carboxymethyl cellulose (CMC)) and did not significantly decrease the viscosity of the CMC solution. Cellotetraose was the smallest oligosaccharide substrate for CpCel48. Since processivity is a key characteristic for cellobiohydrolases, the new initial false/right attack model was developed for estimation of processivity by considering the enzyme's substrate specificity, the crystalline structure of homologous Cel48 enzymes, and the configuration of cellulose chains. The processivities of CpCel48 on Avicel and RAC were estimated to be approximately 3.5 and 6.0, respectively. Heterologous expression of secretory active cellobiohydrolase in B. subtilis is an important step for developing recombinant cellulolytic B. subtilis strains for low-cost production of advanced biofuels from cellulosic materials in a single step.

Effect of linker length and dockerin position on conversion of a Thermobifida fusca endoglucanase to the cellulosomal mode

We have been developing the cellulases of Thermobifida fusca as a model to explore the conversion from a free cellulase system to the cellulosomal mode. Three of the six T. fusca cellulases (endoglucanase Cel6A and exoglucanases Cel6B and Cel48A) have been converted in previous work by replacing their cellulose-binding modules (CBMs) with a dockerin, and the resultant recombinant "cellulosomized" enzymes were incorporated into chimeric scaffolding proteins that contained cohesin(s) together with a CBM. The activities of the resultant designer cellulosomes were compared with an equivalent mixture of wild-type enzymes. In the present work, a fourth T. fusca cellulase, Cel5A, was equipped with a dockerin and intervening linker segments of different lengths to assess their contribution to the overall activity of simple one- and two-enzyme designer cellulosome complexes. The results demonstrated that cellulose binding played a major role in the degradation of crystalline cellulosic substrates. The combination of the converted Cel5A endoglucanase with the converted Cel48A exoglucanase also exhibited a measurable proximity effect for the most recalcitrant cellulosic substrate (Avicel). The length of the linker between the catalytic module and the dockerin had little, if any, effect on the activity. However, positioning of the dockerin on the opposite (C-terminal) side of the enzyme, consistent with the usual position of dockerins on most cellulosomal enzymes, resulted in an enhanced synergistic response. These results promote the development of more complex multienzyme designer cellulosomes, which may eventually be applied for improved degradation of plant cell wall biomass.

The family 1 glycoside hydrolase from Clostridium cellulolyticum H10 is a cellodextrin glucohydrolase

The only family 1 glycoside hydrolase in Clostridium cellulolyticum H10 (CcGH1) is annotated as a beta-galactosidase but has high sequence homology with many beta-glucosidases. Given the possible importance of beta-glucosidase in cellulose utilization by C. cellulolyticum, the encoding open reading frame Ccel_0374 was cloned and expressed in E. coli as a soluble fusion protein with thioredoxin. After tag cleavage, the purified enzyme had a molecular mass of 52 kDa and was active in dimeric form on a broad range of substrates, including cellobiose, cellotriose, cellotetraose, p-nitrophenyl-beta-glucopyranoside, lactose, and o-nitrophenyl-beta-galactopyranoside. The enzyme showed lower K(m) and higher catalytic efficiency (k (cat)/K(m)) on cellodextrins with degree of polymerization from 2 to 4 than on lactose, and the k (cat)/K (m) values on cellodextrins increased in the order of cellobiose < cellotriose < cellotetraose, suggesting that CcGH1 was a cellodextrin glucohydrolase (EC 3.2.1.74). The high K(m) (69 mM) on cellobiose implies that CcGH1 likely has a minimal role in the intracellular hydrolysis of cellobiose in C. cellulolyticum. The three-dimensional structure model of CcGH1 generated by homology modeling showed a typical (alpha/beta)(8) barrel topology characteristic of family 1 glycoside hydrolases.

Functional assembly of minicellulosomes on the Saccharomyces cerevisiae cell surface for cellulose hydrolysis and ethanol production

We demonstrated the functional display of a miniscaffoldin on the Saccharomyces cerevisiae cell surface consisting of three divergent cohesin domains from Clostridium thermocellum (t), Clostridium cellulolyticum (c), and Ruminococcus flavefaciens (f). Incubation with Escherichia coli lysates containing an endoglucanase (CelA) fused with a dockerin domain from C. thermocellum (At), an exoglucanase (CelE) from C. cellulolyticum fused with a dockerin domain from the same species (Ec), and an endoglucanase (CelG) from C. cellulolyticum fused with a dockerin domain from R. flavefaciens (Gf) resulted in the assembly of a functional minicellulosome on the yeast cell surface. The displayed minicellulosome retained the synergistic effect for cellulose hydrolysis. When a beta-glucosidase (BglA) from C. thermocellum tagged with the dockerin from R. flavefaciens was used in place of Gf, cells displaying the new minicellulosome exhibited significantly enhanced glucose liberation and produced ethanol directly from phosphoric acid-swollen cellulose. The final ethanol concentration of 3.5 g/liter was 2.6-fold higher than that obtained by using the same amounts of added purified cellulases. The overall yield was 0.49 g of ethanol produced per g of carbohydrate consumed, which corresponds to 95% of the theoretical value. This result confirms that simultaneous and synergistic saccharification and fermentation of cellulose to ethanol can be efficiently accomplished with a yeast strain displaying a functional minicellulosome containing all three required cellulolytic enzymes.

Processive endoglucanases mediate degradation of cellulose by Saccharophagus degradans

Bacteria and fungi are thought to degrade cellulose through the activity of either a complexed or a noncomplexed cellulolytic system composed of endoglucanases and cellobiohydrolases. The marine bacterium Saccharophagus degradans 2-40 produces a multicomponent cellulolytic system that is unusual in its abundance of GH5-containing endoglucanases. Secreted enzymes of this bacterium release high levels of cellobiose from cellulosic materials. Through cloning and purification, the predicted biochemical activities of the one annotated cellobiohydrolase Cel6A and the GH5-containing endoglucanases were evaluated. Cel6A was shown to be a classic endoglucanase, but Cel5H showed significantly higher activity on several types of cellulose, was the highest expressed, and processively released cellobiose from cellulosic substrates. Cel5G, Cel5H, and Cel5J were found to be members of a separate phylogenetic clade and were all shown to be processive. The processive endoglucanases are functionally equivalent to the endoglucanases and cellobiohydrolases required for other cellulolytic systems, thus providing a cellobiohydrolase-independent mechanism for this bacterium to convert cellulose to glucose.

The rosettazyme: a synthetic cellulosome

Cellulose is an attractive feedstock for biofuel production because of its abundance, but the cellulose polymer is extremely stable and its constituent sugars are difficult to access. In nature, extracellular multi-enzyme complexes known as cellulosomes are among the most effective ways to transform cellulose to useable sugars. Cellulosomes consist of a diversity of secreted cellulases and other plant cell-wall degrading enzymes bound to a protein scaffold. These scaffold proteins have cohesin modules that bind conserved dockerin modules on the enzymes. It is thought that the localization of these diverse enzymes on the scaffold allows them to function synergistically. In order to understand and harness this synergy smaller, simplified cellulosomes have been constructed, expressed, and reconstituted using truncated cohesin-containing scaffolds. Here we show that an 18-subunit protein complex called a rosettasome can be genetically engineered to bind dockerin-containing enzymes and function like a cellulosome. Rosettasomes are thermostable, group II chaperonins from the hyperthermo-acidophilic archaeon Sulfolobus shibatae, which in the presence of ATP/Mg(2+) assemble into 18-subunit, double-ring structures. We fused a cohesin module from Clostridium thermocellum to a circular permutant of a rosettasome subunit, and we demonstrate that the cohesin-rosettasomes: (1) bind dockerin-containing endo- and exo-gluconases, (2) the bound enzymes have increased cellulose-degrading activity compared to their activity free in solution, and (3) this increased activity depends on the number and ratio of the bound glucanases. We call these engineered multi-enzyme structures rosettazymes.

Regulation of the display ratio of enzymes on the Saccharomyces cerevisiae cell surface by the immunoglobulin G and cellulosomal enzyme binding domains

We constructed a novel cell surface display system to control the ratio of target proteins on the Saccharomyces cerevisiae cell surface, using two pairs of protein-protein interactions. One protein pair is the Z domain of protein A derived from Staphylococcus aureus and the Fc domain of human immunoglobulin G. The other is the cohesin (Coh) and dockerin (Dock) from the cellulosome of Clostridium cellulovorans. In this proposed displaying system, the scaffolding proteins (fusion proteins of Z and Coh) were displayed on the cell surface by fusing with the 3' half of alpha-agglutinin, and the target proteins fused with Fc or Dock were secreted. As a target protein, a recombinant Trichoderma reesei endoglucanase II (EGII) was secreted into the medium and immediately displayed on the yeast cell surface via the Z and Fc domains. Display of EGII on the cell surface was confirmed by hydrolysis of beta-glucan as a substrate, and EGII activity was detected in the cell pellet fraction. Finally, two enzymes, EGII and Aspergillus aculeatus beta-glucosidase 1, were codisplayed on the cell surface via Z-Fc and Dock-Coh interactions, respectively. As a result, the yeast displaying two enzymes hydrolyzed beta-glucan to glucose very well. These results strongly indicated that the proposed strategy, the simultaneous display of two enzymes on the yeast cell surface, was accomplished by quantitatively controlling the display system using affinity binding.

Synthetic biology and biomass conversion: a match made in heaven?

To move our economy onto a sustainable basis, it is essential that we find a replacement for fossil carbon as a source of liquid fuels and chemical industry feedstocks. Lignocellulosic biomass, available in enormous quantities, is the only feasible replacement. Many micro-organisms are capable of rapid and efficient degradation of biomass, employing a battery of specialized enzymes, but do not produce useful products. Attempts to transfer biomass-degrading capability to industrially useful organisms by heterologous expression of one or a few biomass-degrading enzymes have met with limited success. It seems probable that an effective biomass-degradation system requires the synergistic action of a large number of enzymes, the individual and collective actions of which are poorly understood. By offering the ability to combine any number of transgenes in a modular, combinatorial way, synthetic biology offers a new approach to elucidating the synergistic action of combinations of biomass-degrading enzymes in vivo and may ultimately lead to a transferable biomass-degradation system. Also, synthetic biology offers the potential for assembly of novel product-formation pathways, as well as mechanisms for increased solvent tolerance. Thus, synthetic biology may finally lead to cheap and effective processes for conversion of biomass to useful products.

Study of cellulases from a newly isolated thermophilic and cellulolytic Brevibacillus sp. strain JXL

A potentially novel aerobic, thermophilic, and cellulolytic bacterium designated as Brevibacillus sp. strain JXL was isolated from swine waste. Strain JXL can utilize a broad range of carbohydrates including: cellulose, carboxymethylcellulose (CMC), xylan, cellobiose, glucose, and xylose. In two different media supplemented with crystalline cellulose and CMC at 57 degrees C under aeration, strain JXL produced a basal level of cellulases as FPU of 0.02 IU/ml in the crude culture supernatant. When glucose or cellobiose was used besides cellulose, cellulase activities were enhanced ten times during the first 24 h, but with no significant difference between these two simple sugars. After that time, however, culture with glucose demonstrated higher cellulase activities compared with that from cellobiose. Similar trend and effect on cellulase activities were also obtained when glucose or cellobiose served as a single substrate. The optimal doses of cellobiose and glucose for cellulase induction were 0.5 and 1%. These inducing effects were further confirmed by scanning electron microscopy (SEM) images, which indicated the presence of extracellular protuberant structures. These cellulosome-resembling structures were most abundant in culture with glucose, followed by cellobiose and without sugar addition. With respect to cellulase activity assay, crude cellulases had an optimal temperature of 50 degrees C and a broad optimal pH range of 6-8. These cellulases also had high thermotolerance as evidenced by retaining more than 50% activity at 100 degrees C after 1 h. In summary, this is the first study to show that the genus Brevibacillus may have strains that can degrade cellulose.

Engineering a reversible, high-affinity system for efficient protein purification based on the cohesin-dockerin interaction

Efficient degradation of cellulose by the anaerobic thermophilic bacterium, Clostridium thermocellum, is carried out by the multi-enzyme cellulosome complex. The enzymes on the complex are attached in a calcium-dependent manner via their dockerin (Doc) module to a cohesin (Coh) module of the cellulosomal scaffoldin subunit. In this study, we have optimized the Coh-Doc interaction for the purpose of protein affinity purification. A C. thermocellum Coh module was thus fused to a carbohydrate-binding module, and the resultant fusion protein was applied directly onto beaded cellulose, thereby serving as a non-covalent "activation" procedure. A complementary Doc module was then fused to a model protein target: xylanase T-6 from Geobacillus stearothermophilus. However, the binding to the immobilized Coh was only partially reversible upon treatment with EDTA, and only negligible amounts of the target protein were eluted from the affinity column. In order to improve protein elution, a series of truncated Docs were designed in which the calcium-coordinating function was impaired without appreciably affecting high-affinity binding to Coh. A shortened Doc of only 48 residues was sufficient to function as an effective affinity tag, and highly purified target protein was achieved directly from crude cell extracts in a single step with near-quantitative recovery of the target protein. Effective EDTA-mediated elution of the sequestered protein from the column was the key step of the procedure. The affinity column was reusable and maintained very high levels of capacity upon repeated rounds of loading and elution. Reusable Coh-Doc affinity columns thus provide an efficient and attractive approach for purifying proteins in high yield by modifying the calcium-binding loop of the Doc module.

Noncellulosomal cohesin- and dockerin-like modules in the three domains of life

The high-affinity cohesin-dockerin interaction was originally discovered as modular components, which mediate the assembly of the various subunits of the multienzyme cellulosome complex that characterizes some cellulolytic bacteria. Until recently, the presence of cohesins and dockerins within a bacterial proteome was considered a definitive signature of a cellulosome-producing bacterium. Widespread genome sequencing has since revealed a wealth of putative cohesin- and dockerin-containing proteins in Bacteria, Archaea, and in primitive eukaryotes. The newly identified modules appear to serve diverse functions that are clearly distinct from the classical cellulosome archetype, and the vast majority of parent proteins are not predicted glycoside hydrolases. In most cases, only a few such genes have been identified in a given microorganism, which encode proteins containing but a single cohesin and/or dockerin. In some cases, one or the other module appears to be missing from a given species, and in other cases both modules occur within the same protein. This review provides a bioinformatics-based survey of the current status of cohesin- and dockerin-like sequences in species from the Bacteria, Archaea, and Eukarya. Surprisingly, many identified modules and their parent proteins are clearly unrelated to cellulosomes. The cellulosome paradigm may thus be the exception rather than the rule for bacterial, archaeal, and eukaryotic employment of cohesin and dockerin modules.

Cellodextrin and laminaribiose ABC transporters in Clostridium thermocellum

Clostridium thermocellum is an anaerobic thermophilic bacterium that grows efficiently on cellulosic biomass. This bacterium produces and secretes a highly active multienzyme complex, the cellulosome, that mediates the cell attachment to and hydrolysis of the crystalline cellulosic substrate. C. thermocellum can efficiently utilize only beta-1,3 and beta-1,4 glucans and prefers long cellodextrins. Since the bacterium can also produce ethanol, it is considered an attractive candidate for a consolidated fermentation process in which cellulose hydrolysis and ethanol fermentation occur in a single process. In this study, we have identified and characterized five sugar ABC transporter systems in C. thermocellum. The putative transporters were identified by sequence homology of the putative solute-binding lipoprotein to known sugar-binding proteins. Each of these systems is transcribed from a gene cluster, which includes an extracellular solute-binding protein, one or two integral membrane proteins, and, in most cases, an ATP-binding protein. The genes of the five solute-binding proteins were cloned, fused to His tags, overexpressed, and purified, and their abilities to interact with different sugars was examined by isothermal titration calorimetry. Three of the sugar-binding lipoproteins (CbpB to -D) interacted with different lengths of cellodextrins (G(2) to G(5)), with disassociation constants in the micromolar range. One protein, CbpA, binds only cellotriose (G(3)), while another protein, Lbp (laminaribiose-binding protein) interacts with laminaribiose. The sugar specificity of the different binding lipoproteins is consistent with the observed substrate preference of C. thermocellum, in which cellodextrins (G(3) to G(5)) are assimilated faster than cellobiose.

Engineering solventogenic clostridia

Solventogenic clostridia are strictly anaerobic, endospore forming bacteria that produce a large array of primary metabolites, like butanol, by anaerobically degrading simple and complex carbohydrates, including cellulose and hemicellulose. Two genomes have been sequenced and some genetic tools have been developed, but more are now urgently needed. Genomic tools for designing, and assessing the impact of, genetic modifications are well developed. Early efforts to metabolically engineer these organisms suggest that they are promising organisms for biorefinery applications. Pathway engineering efforts have resulted in interesting strains, but global engineering of their transcriptional machinery has produced better outcomes. Future efforts are expected to undertake the development of complex multigenic phenotypes, such as aerotolerance, solvent tolerance, high-cell density fermentations, abolished sporulation without impacting product formation, and genetic stability for continuous bioprocessing.

Structural basis of Clostridium perfringens toxin complex formation

The virulent properties of the common human and livestock pathogen Clostridium perfringens are attributable to a formidable battery of toxins. Among these are a number of large and highly modular carbohydrate-active enzymes, including the mu-toxin and sialidases, whose catalytic properties are consistent with degradation of the mucosal layer of the human gut, glycosaminoglycans, and other cellular glycans found throughout the body. The conservation of noncatalytic ancillary modules among these enzymes suggests they make significant contributions to the overall functionality of the toxins. Here, we describe the structural basis of an ultra-tight interaction (K(a) = 1.44 x 10(11) M(-1)) between the X82 and dockerin modules, which are found throughout numerous C. perfringens carbohydrate-active enzymes. Extensive hydrogen-bonding and van der Waals contacts between the X82 and dockerin modules give rise to the observed high affinity. The mu-toxin dockerin module in this complex is positioned approximately 180 degrees relative to the orientation of the dockerin modules on the cohesin module surface within cellulolytic complexes. These observations represent a unique property of these clostridial toxins whereby they can associate into large, noncovalent multitoxin complexes that allow potentiation of the activities of the individual toxins by combining complementary toxin specificities.

Carbon catabolite repression in bacteria: many ways to make the most out of nutrients

Most bacteria can selectively use substrates from a mixture of different carbon sources. The presence of preferred carbon sources prevents the expression, and often also the activity, of catabolic systems that enable the use of secondary substrates. This regulation, called carbon catabolite repression (CCR), can be achieved by different regulatory mechanisms, including transcription activation and repression and control of translation by an RNA-binding protein, in different bacteria. Moreover, CCR regulates the expression of virulence factors in many pathogenic bacteria. In this Review, we discuss the most recent findings on the different mechanisms that have evolved to allow bacteria to use carbon sources in a hierarchical manner.

Three microbial strategies for plant cell wall degradation

Cellulolytic bacteria and fungi have been shown to use two different approaches to degrade cellulose. Most aerobic microbes secrete sets of individual cellulases, many of which contain a carbohydrate binding molecule (CBM), which act synergistically on native cellulose. Most anaerobic microorganisms produce large multienzyme complexes called cellulosomes, which are usually attached to the outer surface of the microorganism. Most of the cellulosomal enzymes lack a CBM, but the cohesin subunit, to which they are bound, does contain a CBM. The cellulases present in each class show considerable overlap in their catalytic domains, and processive cellulases (exocellulases and processive endocellulases) are the most abundant components of both the sets of free enzymes and of the cellulosomal cellulases. Analysis of the genomic sequences of two cellulolytic bacteria, Cytophaga hutchinsonii, an aerobe, and Fibrobacter succinogenes, an anaerobe, suggest that these organisms must use a third mechanism. This is because neither of these organisms, encodes processive cellulases and most of their many endocellulase genes do not encode CBMs. Furthermore, neither organism appears to encode the dockerin and cohesin domains that are key components of cellulosomes.

Termites in the woodwork

Termites eat and digest wood, but how do they do it? Combining advanced genomics and proteomics techniques, researchers have now shown that microbes found in the termites' hindguts possess just the right tools.

Conversion of Thermobifida fusca free exoglucanases into cellulosomal components: comparative impact on cellulose-degrading activity

Cellulosomes are multi-enzyme complexes produced by certain anaerobic bacteria that exhibit efficient degradation of plant cell wall polysaccharides. To understand their enhanced levels of hydrolysis, we are investigating the effects of converting a free-cellulase system into a cellulosomal one. To achieve this end, we are replacing the cellulose-binding module of the native cellulases, produced by the aerobic bacterium Thermobifida fusca, with a cellulosome-derived dockerin module of established specificity, to allow their incorporation into defined "designer cellulosomes". In this communication, we have attached divergent dockerins to the two exoglucanases produced by T. fusca exoglucanase, Cel6B and Cel48A. The resultant fusion proteins were shown to bind efficiently and specifically to their matching cohesins, and their activities on several different cellulose substrates were compared. The lack of a cellulose-binding module in Cel6B had a deleterious effect on its activity on crystalline substrates. In contrast, the dockerin-bearing family-48 exoglucanase showed increased levels of hydrolytic activity on carboxymethyl cellulose and on both crystalline substrates tested, compared to the wild-type enzyme. The marked difference in the response of the two exoglucanases to incorporation into a cellulosome, suggests that the family-48 cellulase is more appropriate than the family-6 enzyme as a designer cellulosome component.

Complete genome sequence of the N2-fixing broad host range endophyte Klebsiella pneumoniae 342 and virulence predictions verified in mice

We report here the sequencing and analysis of the genome of the nitrogen-fixing endophyte, Klebsiella pneumoniae 342. Although K. pneumoniae 342 is a member of the enteric bacteria, it serves as a model for studies of endophytic, plant-bacterial associations due to its efficient colonization of plant tissues (including maize and wheat, two of the most important crops in the world), while maintaining a mutualistic relationship that encompasses supplying organic nitrogen to the host plant. Genomic analysis examined K. pneumoniae 342 for the presence of previously identified genes from other bacteria involved in colonization of, or growth in, plants. From this set, approximately one-third were identified in K. pneumoniae 342, suggesting additional factors most likely contribute to its endophytic lifestyle. Comparative genome analyses were used to provide new insights into this question. Results included the identification of metabolic pathways and other features devoted to processing plant-derived cellulosic and aromatic compounds, and a robust complement of transport genes (15.4%), one of the highest percentages in bacterial genomes sequenced. Although virulence and antibiotic resistance genes were predicted, experiments conducted using mouse models showed pathogenicity to be attenuated in this strain. Comparative genomic analyses with the presumed human pathogen K. pneumoniae MGH78578 revealed that MGH78578 apparently cannot fix nitrogen, and the distribution of genes essential to surface attachment, secretion, transport, and regulation and signaling varied between each genome, which may indicate critical divergences between the strains that influence their preferred host ranges and lifestyles (endophytic plant associations for K. pneumoniae 342 and presumably human pathogenesis for MGH78578). Little genome information is available concerning endophytic bacteria. The K. pneumoniae 342 genome will drive new research into this less-understood, but important category of bacterial-plant host relationships, which could ultimately enhance growth and nutrition of important agricultural crops and development of plant-derived products and biofuels.

A biophysical perspective on the cellulosome: new opportunities for biomass conversion

The cellulosome is a multiprotein complex, produced primarily by anaerobic microorganisms, which functions to degrade lignocellulosic materials. An important topic of current debate is whether cellulosomal systems display greater ability to deconstruct complex biomass materials (e.g. plant cell walls) than nonaggregated enzymes, and in so doing would be appropriate for improved, commercial bioconversion processes. To sufficiently understand the complex macromolecular processes between plant cell wall polymers, cellulolytic microbes, and their secreted enzymes, a highly concerted research approach is required. Adaptation of existing biophysical techniques and development of new science tools must be applied to this system. This review focuses on strategies likely to permit improved understanding of the bacterial cellulosome using biophysical approaches, with emphasis on advanced imaging and computational techniques.

A stochastic automaton shows how enzyme assemblies may contribute to metabolic efficiency

BACKGROUND

The advantages of grouping enzymes into metabolons and into higher order structures have long been debated. To quantify these advantages, we have developed a stochastic automaton that allows experiments to be performed in a virtual bacterium with both a membrane and a cytoplasm. We have investigated the general case of transport and metabolism as inspired by the phosphoenolpyruvate:sugar phosphotransferase system (PTS) for glucose importation and by glycolysis.

RESULTS

We show that PTS and glycolytic metabolons can increase production of pyruvate eightfold at low concentrations of phosphoenolpyruvate. A fourfold increase in the numbers of enzyme EI led to a 40% increase in pyruvate production, similar to that observed in vivo in the presence of glucose. Although little improvement resulted from the assembly of metabolons into a hyperstructure, such assembly can generate gradients of metabolites and signaling molecules.

CONCLUSION

in silico experiments may be performed successfully using stochastic automata such as HSIM (Hyperstructure Simulator) to help answer fundamental questions in metabolism about the properties of molecular assemblies and to devise strategies to modify such assemblies for biotechnological ends.

Cohesin-dockerin microarray: Diverse specificities between two complementary families of interacting protein modules

The cellulosome is an intricate multienzyme complex, designed for efficient degradation of plant cell wall polysaccharides, notably cellulose. The supramolecular cellulosome architecture in different bacteria is the consequence of the types and specificities of the interacting cohesin and dockerin modules, borne by the different cellulosomal subunits. In this study, we describe a microarray system for determining cohesin-dockerin specificity, which allows global comparison among the interactions between various members of these two complementary families of interacting protein modules. Matching recombinant fusion proteins were prepared that contained one of the interacting modules: cohesins were joined to an appropriate cellulose-binding module (CBM) and the dockerins were fused to a thermostable xylanase that served to enhance expression and proper folding. The CBM-fused cohesins were immobilized on cellulose-coated glass slides, to which xylanase-fused dockerin samples were applied. Knowledge of the specificity characteristics of native and mutated members of the cohesin and dockerin families provides insight into the architecture of the parent cellulosome and allows selection of suitable cohesin-dockein pairs for biotechnological and nanotechnological application. Using this approach, extensive cross-species interaction among type-II cohesins and dockerins is shown for the first time. Selective intraspecies binding of an archaeal dockerin to two complementary cohesins is also demonstrated.

Polysaccharide utilization by gut bacteria: potential for new insights from genomic analysis

The microbiota of the mammalian intestine depend largely on dietary polysaccharides as energy sources. Most of these polymers are not degradable by the host, but herbivores can derive 70% of their energy intake from microbial breakdown--a classic example of mutualism. Moreover, dietary polysaccharides that reach the human large intestine have a major impact on gut microbial ecology and health. Insight into the molecular mechanisms by which different gut bacteria use polysaccharides is, therefore, of fundamental importance. Genomic analyses of the gut microbiota could revolutionize our understanding of these mechanisms and provide new biotechnological tools for the conversion of polysaccharides, including lignocellulosic biomass, into monosaccharides.

Three-dimensional structure of a putative non-cellulosomal cohesin module from a Clostridium perfringens family 84 glycoside hydrolase

The genomes of myonecrotic strains of Clostridium perfringens encode a large number of secreted glycoside hydrolases. The activities of these enzymes are consistent with degradation of the mucosal layer of the human gastrointestinal tract, glycosaminoglycans and other cellular glycans found throughout the body. In many cases this is thought to aid in the propagation of the major toxins produced by C. perfringens. One such example is the family 84 glycoside hydrolases, which contains five C. perfringens members (CpGH84A-E), each displaying a unique modular architecture. The smallest and most extensively studied member, CpGH84C, comprises an N-terminal catalytic domain with beta-N-acetylglucosaminidase activity, a family 32 carbohydrate-binding module, a family 82 X-module (X82) of unknown function, and a fibronectin type-III-like module. Here we present the structure of the X82 module from CpGH84C, determined by both NMR spectroscopy and X-ray crystallography. CpGH84C X82 adopts a jell-roll fold comprising two beta-sheets formed by nine beta-strands. CpGH84C X82 displays distant amino acid sequence identity yet close structural similarity to the cohesin modules of cellulolytic anaerobic bacteria. Cohesin modules are responsible for the assembly of numerous hydrolytic enzymes in a cellulose-degrading multi-enzyme complex, termed the cellulosome, through a high-affinity interaction with the calcium-binding dockerin module. A planar surface is located on the face of the CpGH84 X82 structure that corresponds to the dockerin-binding region of cellulolytic cohesin modules and has the approximate dimensions to accommodate a dockerin module. The presence of cohesin-like X82 modules in glycoside hydrolases of C. perfringens is an indication that the formation of novel X82-dockerin mediated multi-enzyme complexes, with potential roles in pathogenesis, is possible.

Cellulases of mesophilic microorganisms: cellulosome and noncellulosome producers

The cellulolytic activity of mesophilic bacteria and fungi is described, with special emphasis on the large extracellular enzyme complex called the cellulosome. The cellulosome is composed of a scaffolding protein, which is attached to various cellulolytic and hemicellulolytic enzymes, and this complex allows the organisms to degrade plant cell walls very efficently. The enzymes include a variety of cellulases, hemicellulases, and pectinases that work synergistically to degrade complex cell-wall molecules.

Toward a hyperstructure taxonomy

Bacterial cells contain many large, spatially extended assemblies of ions, molecules, and macromolecules, called hyperstructures, that are implicated in functions that range from DNA replication and cell division to chemotaxis and secretion. Interactions between these hyperstructures would create a level of organization intermediate between macromolecules and the cell itself. To explore this level, a taxonomy is needed. Here, we describe classification criteria based on the form of the hyperstructure and on the processes responsible for this form. These processes include those dependent on coupled transcription-translation, protein-protein affinities, chromosome site-binding by protein, and membrane structures. Various combinations of processes determine the formation, maturation, and demise of many hyperstructures that therefore follow a trajectory within the space of classification by form/process. Hence a taxonomy by trajectory may be desirable. Finally, we suggest that working toward a taxonomy based on speculative interactions between hyperstructures promises most insight into life at this level.

Exploration of new geometries in cellulosome-like chimeras

In this study, novel cellulosome chimeras exhibiting atypical geometries and binding modes, wherein the targeting and proximity functions were directly incorporated as integral parts of the enzyme components, were designed. Two pivotal cellulosomal enzymes (family 48 and 9 cellulases) were thus appended with an efficient cellulose-binding module (CBM) and an optional cohesin and/or dockerin. Compared to the parental enzymes, the chimeric cellulases exhibited improved activity on crystalline cellulose as opposed to their reduced activity on amorphous cellulose. Nevertheless, the various complexes assembled using these engineered enzymes were somewhat less active on crystalline cellulose than the conventional designer cellulosomes containing the parental enzymes. The diminished activity appeared to reflect the number of protein-protein interactions within a given complex, which presumably impeded the mobility of their catalytic modules. The presence of numerous CBMs in a given complex, however, also reduced their performance. Furthermore, a "covalent cellulosome" that combines in a single polypeptide chain a CBM, together with family 48 and family 9 catalytic modules, also exhibited reduced activity. This study also revealed that the cohesin-dockerin interaction may be reversible under specific conditions. Taken together, the data demonstrate that cellulosome components can be used to generate higher-order functional composites and suggest that enzyme mobility is a critical parameter for cellulosome efficiency.

Multiple display of catalytic modules on a protein scaffold: nano-fabrication of enzyme particles

Self assembly is a prerequisite for fabricating nanoscale structures. Here we present a new fusion protein based on the stress-responsive homo-oligomeric protein, SP1. This ring-shaped protein is a highly stable homododecamer, which can be potentially utilized to self-assemble different modules and enzymes in a predicted and oriented manner. For that purpose, a cohesin module (a component of the bacterial cellulosome) was selected, its gene fused in-frame to SP1, and the fusion protein was expressed in Escherichia coli. The cohesin module, specialized to incorporate different enzymes through specific recognition of a dockerin modular counterpart, is used to display new moieties on the SP1 scaffold. The SP1 scaffold displayed 12 active cohesin modules and specific binding to a dockerin-fused cellulase enzyme from Thermobifida fusca. Moreover, we found a significant increase in specific activity of the scaffold-displayed enzymes.

Synergistic interaction of Clostridium cellulovorans cellulosomal cellulases and HbpA

Clostridium cellulovorans, an anaerobic bacterium, produces a small nonenzymatic protein called HbpA, which has a surface layer homology domain and a type I cohesin domain similar to those found in the cellulosomal scaffolding protein CbpA. In this study, we demonstrated that HbpA could bind to cell wall fragments from C. cellulovorans and insoluble polysaccharides and form a complex with cellulosomal cellulases endoglucanase B (EngB) and endoglucanase L (EngL). Synergistic degradative action of the cellulosomal cellulase and HbpA complexes was demonstrated on acid-swollen cellulose, Avicel, and corn fiber. We propose that HbpA functions to bind dockerin-containing cellulosomal enzymes to the cell surface and complements the activity of cellulosomes.

Cellulosomes: microbial nanomachines that display plasticity in quaternary structure

The assembly of proteins that display complementary activities into supramolecular intra- and extracellular complexes is central to cellular function. One such nanomachine of considerable biological and industrial significance is the plant cell wall degrading apparatus of anaerobic bacteria termed the cellulosome. The Clostridium thermocellum cellulosome assembles through the interaction of a type I dockerin module in the catalytic entities with one of several type I cohesin modules in the non-catalytic scaffolding protein. Recent structural studies have provided the molecular details of how dockerin-cohesin interactions mediate both cellulosome assembly and the retention of the protein complex on the bacterial cell surface. The type I dockerin, which displays near-perfect sequence and structural symmetry, interacts with its cohesin partner through a dual binding mode in which either the N- or C-terminal helix dominate heterodimer formation. The biological significance of this dual binding mode is discussed with respect to the plasticity of the orientation of the catalytic subunits within this supramolecular assembly. The flexibility in the quaternary structure of the cellulosome may reflect the challenges presented by the degradation of a heterogenous recalcitrant insoluble substrate by an intricate macromolecular complex, in which the essential synergy between the catalytic subunits is a key feature of cellulosome function.

Functional taxonomy of bacterial hyperstructures

The levels of organization that exist in bacteria extend from macromolecules to populations. Evidence that there is also a level of organization intermediate between the macromolecule and the bacterial cell is accumulating. This is the level of hyperstructures. Here, we review a variety of spatially extended structures, complexes, and assemblies that might be termed hyperstructures. These include ribosomal or "nucleolar" hyperstructures; transertion hyperstructures; putative phosphotransferase system and glycolytic hyperstructures; chemosignaling and flagellar hyperstructures; DNA repair hyperstructures; cytoskeletal hyperstructures based on EF-Tu, FtsZ, and MreB; and cell cycle hyperstructures responsible for DNA replication, sequestration of newly replicated origins, segregation, compaction, and division. We propose principles for classifying these hyperstructures and finally illustrate how thinking in terms of hyperstructures may lead to a different vision of the bacterial cell.

From the deep sea to the stars: human life support through minimal communities

Support of human life during long-distance exploratory space travel or in the creation of human habitats in extreme environments can be accomplished using the action of microbial consortia inhabiting interconnected bioreactors, designed for the purpose of reconversion of solid, liquid and gaseous wastes produced by the human crew or by one of the compartments of the bioregenerative loop, into nutritional biomass, oxygen and potable water. The microorganisms responsible for bioregenerative life support are part of Earth's own geomicrobial reconversion cycle. Depending on the resources and conditions available, minimal life support systems can be assembled using appropriately selected microorganisms that possess metabolic routes for each specific purpose in the transformation cycle. Under control of an engineered system, a reliable life-support system can hence be provided for.

The potential of cellulases and cellulosomes for cellulosic waste management

Lignocellulose is the most abundant plant cell wall component of the biosphere and the most voluminous waste produced by our society. Fortunately, it is not toxic or directly harmful, but our major waste disposal facilities--the landfills--are rapidly filling up with few realistic alternatives. Because cellulose is pure glucose, its conversion to fine products or fuels has remained a romantic and popular notion; however, the heterogeneous and recalcitrant nature of cellulosic waste presents a major obstacle for conventional conversion processes. One paradigm for the conversion of biomass to products in nature relies on a multienzyme complex, the cellulosome. Microbes that produce cellulosomes convert lignocelluose to microbial cell mass and products (e.g. ethanol) simultaneously. The combination of designer cellulosomes with novel production concepts could in the future provide the breakthroughs necessary for economical conversion of cellulosic biomass to biofuels.

Evidence for a dual binding mode of dockerin modules to cohesins

The assembly of proteins that display complementary activities into macromolecular complexes is critical to cellular function. One such enzyme complex, of environmental significance, is the plant cell wall degrading apparatus of anaerobic bacteria, termed the cellulosome. The complex assembles through the interaction of enzyme-derived "type I dockerin" modules with the multiple "cohesin" modules of the scaffolding protein. Clostridium thermocellum type I dockerin modules contain a duplicated 22-residue sequence that comprises helix-1 and helix-3, respectively. The crystal structure of a C. thermocellum type I cohesin-dockerin complex showed that cohesin recognition was predominantly through helix-3 of the dockerin. The sequence duplication is reflected in near-perfect 2-fold structural symmetry, suggesting that both repeats could interact with cohesins by a common mechanism in wild-type (WT) proteins. Here, a helix-3 disrupted mutant dockerin is used to visualize the reverse binding in which the dockerin mutant is indeed rotated 180 degrees relative to the WT dockerin such that helix-1 now dominates recognition of its protein partner. The dual binding mode is predicted to impart significant plasticity into the orientation of the catalytic subunits within this supramolecular assembly, which reflects the challenges presented by the degradation of a heterogeneous, recalcitrant, insoluble substrate by a tethered macromolecular complex.

A review of feeding and nutrition of herbivorous land crabs: adaptations to low quality plant diets

This paper reviews the nutritional ecology, the digestive physiology, and biochemistry of herbivorous land crabs and the adaptations that they possess towards a diet of plant material. Land crab species that breathe air and forage out of water can be divided into three feeding specialisations: primarily carnivorous, deposit feeders feeding on micro-organisms and organic matter in the sediment, and herbivores consuming mainly plant material and its detritus. The last forms the focus of this review. The diets of the herbivores are low in nitrogen and high in carbon, are difficult to digest since they contain cellulose and hemicellulose, and may disrupt digestion due to the presence of tannins. Herbivorous crustaceans are able to efficiently utilise plant material as their primary nutrient source and are indeed able to meet their nitrogen requirements from it. Herbivorous land crabs display a range of adaptations towards a low nitrogen intake and these are discussed in this review. They also appear to endogenously produce cellulase and hemicellulase enzymes for the digestion of cellulose and hemicellulose. Generalised and specific adaptations allow them to inhibit the potentially negative digestive effects of tannins. To digest plant material, they possess a plastic digestive strategy of high food intake, short retention time, high assimilation of cell contents, and substantial digestion of cellulose and hemicellulose.

Synthesis of Clostridium cellulovorans minicellulosomes by intercellular complementation

The ability of two strains of bacteria to cooperate in the synthesis of an enzyme complex (a minicellulosome) was examined. Three strains of Bacillus subtilis were constructed to express Clostridium cellulovorans genes engB, xynB, and minicbpA. MiniCbpA, EngB, and XynB were synthesized and secreted into the medium by B. subtilis. When the strains with the minicbpA and engB genes or with xynB were cocultured, minicellulosomes were synthesized, consisting in one case of miniCbpA and EngB and in the second case of miniCbpA and XynB. Both minicellulosomes showed their respective enzymatic activities. We call this phenomenon "intercellular complementation." Interesting implications concerning bacterial cooperation are suggested from these results.

Enzyme-microbe synergy during cellulose hydrolysis by Clostridium thermocellum

Specific cellulose hydrolysis rates (g of cellulose/g of cellulase per h) were shown to be substantially higher (2.7- to 4.7-fold) for growing cultures of Clostridium thermocellum as compared with purified cellulase preparations from this organism in controlled experiments involving both batch and continuous cultures. This "enzyme-microbe synergy" requires the presence of metabolically active cellulolytic microbes, is not explained by removal of hydrolysis products from the bulk fermentation broth, and appears due to surface phenomena involving adherent cellulolytic microorganisms. Results support the desirability of biotechnological processes featuring microbial conversion of cellulosic biomass to ethanol (or other products) in the absence of added saccharolytic enzymes.

Conservation and divergence in cellulosome architecture between two strains of Ruminococcus flavefaciens

A 17-kb scaffoldin gene cluster in Ruminococcus flavefaciens strain FD-1 was compared with the homologous segment published for strain 17. Although the general design of the cluster is identical in the two strains, significant differences in the modular architecture of the scaffoldin proteins were discovered, implying strain-specific divergence in cellulosome organization.

Degradation of cellulosome-produced cello-oligosaccharides by an extracellular non-cellulosomal beta-glucan glucohydrolase, BglA, from Clostridium cellulovorans

Clostridium cellulovorans degrades cellulose efficiently to small oligosaccharides, which are used as an energy source. To characterize enzymes related to degrading small oligosaccharides, a gene was cloned for an extracellular non-cellulosomal beta-glucan glucohydrolase (BglA) classified as a family-1 glycosyl hydrolase in C. cellulovorans. Recombinant BglA (rBglA) had higher activity on long glucooligomers than on cellobiose. When cellulosomes and rBglA were incubated with cellulose, the oligosaccharides produced were degraded more effectively to cellobiose and glucose, than with cellulosomes alone, indicating that BglA facilitated the degradation of accessible cello-oligosaccharides produced from cellulose by C. cellulovorans cellulosomes. Thus, this is an example of an extracellular non-cellulosomal enzyme working in a cooperative manner with cellulosomes to degrade cellulose to sugars.

Carbohydrate binding modules: biochemical properties and novel applications

Polysaccharide-degrading microorganisms express a repertoire of hydrolytic enzymes that act in synergy on plant cell wall and other natural polysaccharides to elicit the degradation of often-recalcitrant substrates. These enzymes, particularly those that hydrolyze cellulose and hemicellulose, have a complex molecular architecture comprising discrete modules which are normally joined by relatively unstructured linker sequences. This structure is typically comprised of a catalytic module and one or more carbohydrate binding modules (CBMs) that bind to the polysaccharide. CBMs, by bringing the biocatalyst into intimate and prolonged association with its substrate, allow and promote catalysis. Based on their properties, CBMs are grouped into 43 families that display substantial variation in substrate specificity, along with other properties that make them a gold mine for biotechnologists who seek natural molecular "Velcro" for diverse and unusual applications. In this article, we review recent progress in the field of CBMs and provide an up-to-date summary of the latest developments in CBM applications.

Lactobacillus plantarum gene clusters encoding putative cell-surface protein complexes for carbohydrate utilization are conserved in specific gram-positive bacteria

BACKGROUND

Genomes of gram-positive bacteria encode many putative cell-surface proteins, of which the majority has no known function. From the rapidly increasing number of available genome sequences it has become apparent that many cell-surface proteins are conserved, and frequently encoded in gene clusters or operons, suggesting common functions, and interactions of multiple components.

RESULTS

A novel gene cluster encoding exclusively cell-surface proteins was identified, which is conserved in a subgroup of gram-positive bacteria. Each gene cluster generally has one copy of four new gene families called cscA, cscB, cscC and cscD. Clusters encoding these cell-surface proteins were found only in complete genomes of Lactobacillus plantarum, Lactobacillus sakei, Enterococcus faecalis, Listeria innocua, Listeria monocytogenes, Lactococcus lactis ssp lactis and Bacillus cereus and in incomplete genomes of L. lactis ssp cremoris, Lactobacillus casei, Enterococcus faecium, Pediococcus pentosaceus, Lactobacillius brevis, Oenococcus oeni, Leuconostoc mesenteroides, and Bacillus thuringiensis. These genes are neither present in the genomes of streptococci, staphylococci and clostridia, nor in the Lactobacillus acidophilus group, suggesting a niche-specific distribution, possibly relating to association with plants. All encoded proteins have a signal peptide for secretion by the Sec-dependent pathway, while some have cell-surface anchors, novel WxL domains, and putative domains for sugar binding and degradation. Transcriptome analysis in L. plantarum shows that the cscA-D genes are co-expressed, supporting their operon organization. Many gene clusters are significantly up-regulated in a glucose-grown, ccpA-mutant derivative of L. plantarum, suggesting catabolite control. This is supported by the presence of predicted CRE-sites upstream or inside the up-regulated cscA-D gene clusters.

CONCLUSION

We propose that the CscA, CscB, CscC and CscD proteins form cell-surface protein complexes and play a role in carbon source acquisition. Primary occurrence in plant-associated gram-positive bacteria suggests a possible role in degradation and utilization of plant oligo- or poly-saccharides.