Cationic polymers and their therapeutic potential

Sensitization of Cancer Cells via Non-Viral Delivery of Apoptosis Inducing Proteins Using a Cationic Bolaamphiphile

Cationic bolaamphiphile polymers had been previously studied as efficient delivery system for the delivery of proteins with relatively low toxicity. Here, the authors investigate the use of a protein delivery system based on a cationic bolaamphiphile to sensitize cancer cells toward apoptosis-inducing drugs as a novel approach for cancer therapy. The authors demonstrates the efficacy of the system by two strategies. The first strategy involves delivery of a survivin antibody to inhibit survivin activity. Sensitization of MCF-7 cells to doxorubicin is observed by survivin inhibition by antibodies. The IC₅₀ of doxorubicin is reduced ≈2.5-fold after delivery of survivin antibodies to breast cancer cells and induction of apoptosis is shown by Western blotting with apoptosis specific antibodies. In a second approach, functional wild type p53 is delivered into p53-null liver cancer (Hep3B) cells, sensitizing the cells toward the p53 pathway drug, Nutlin. Nutlin reduced the viability of Hep3B cells by ≈42% at 15 μM concentration, demonstrating the effectiveness of p53 delivery. The expression of p21, a downstream target of p53 further confirmed the functional status of the delivered protein. In conclusion. The successful delivery of apoptosis inducing proteins and sensitization of cancer cells via cationic bolaamphiphile polymer represents a promising system for cancer therapeutics.

Efficient cell delivery mediated by lipid-specific endosomal escape of supercharged branched peptides

Various densely charged polycationic species, whether of biological or synthetic origin, can penetrate human cells, albeit with variable efficiencies. The molecular underpinnings involved in such transport remain unclear. Herein, we assemble 1, 2 or 3 copies of the HIV peptide TAT on a synthetic scaffold to generate branched cell-permeable prototypes with increasing charge density. We establish that increasing TAT copies dramatically increases the cell penetration efficiency of the peptides while simultaneously enabling the efficient cytosolic delivery of macromolecular cargos. Cellular entry involves the leaky fusion of late endosomal membranes enriched with the anionic lipid BMP. Derivatives with multiple TAT branches induce the leakage of BMP-containing lipid bilayers, liposomal flocculation, fusion and an increase in lamellarity. In contrast, while the monomeric counterpart 1TAT binds to the same extent and causes liposomal flocculation, 1TAT does not cause leakage, induce fusion or a significant increase in lamellarity. Overall, these results indicate that an increase in charge density of these branched structures leads to the emergence of lipid specific membrane-disrupting and cell-penetrating activities.

Non-viral gene delivery systems for tissue repair and regeneration

Critical tissue defects frequently result from trauma, burns, chronic wounds and/or surgery. The ideal treatment for such tissue loss is autografting, but donor sites are often limited. Tissue engineering (TE) is an inspiring alternative for tissue repair and regeneration (TRR). One of the current state-of-the-art methods for TRR is gene therapy. Non-viral gene delivery systems (nVGDS) have great potential for TE and have several advantages over viral delivery including lower immunogenicity and toxicity, better cell specificity, better modifiability, and higher productivity. However, there is no ideal nVGDS for TRR, hence, there is widespread research to improve their properties. This review introduces the basic principles and key aspects of commonly-used nVGDSs. We focus on recent advances in their applications, current challenges, and future directions.

Stimuli-Responsive Cationic Hydrogels in Drug Delivery Applications

Stimuli-responsive, smart, intelligent, or environmentally sensitive polymers respond to changes in external stimuli such as pH, temperature, ionic strength, surfactants, pressure, light, biomolecules, and magnetic field. These materials are developed in various network architectures such as block copolymers, crosslinked hydrogels, nanogels, inter-penetrating networks, and dendrimers. Stimuli-responsive cationic polymers and hydrogels are an interesting class of "smart" materials that respond reversibly to changes in external pH. These materials have the ability to swell extensively in solutions of acidic pH and de-swell or shrink in solutions of alkaline pH. This reversible swelling-shrinking property brought about by changes in external pH conditions makes these materials useful in a wide range of applications such as drug delivery systems and chemical sensors. This article focuses mainly on the properties of these interesting materials and their applications in drug delivery systems.

Everything You Always Wanted to Know about Poly-l-lysine Dendrigrafts (But Were Afraid to Ask)

Less than a decade ago, dendrigrafts of poly-l-lysine (DGLs) joined the family of polycationic dendritic macromolecules. Resulting from the iterative polycondensation of an N-carboxyanhydride in water, four generations of the dendrigraft can be obtained on a multigram scale and without chromatographic purification. DGLs share features with both dendrimers and hyperbranched polymers, but turned out to have unique biophysical and bioactive properties. The macromolecules-in their native form or functionalized-have been extensively characterized by various analytical and computational methods, and have already found numerous applications in the biomedical field, such as drug and gene delivery, biomaterials, tissue engineering, bioimaging, and biosensing. Despite a growing interest for DGLs, there is still plenty of room for further exciting developments that could result from a better exposure of these macromolecules, which is the ambition of this short review.

Construction of high surface potential polypyrrole nanorods with enhanced antibacterial properties

High surface potential polypyrrole nanorods with enhanced antibacterial properties.

Biomolecular dynamic covalent polymers for DNA complexation and siRNA delivery

Dynamic covalent polymers made from modified amino acids complex nucleic acids and deliver siRNA in living cells.

Construction of three-dimensional net-like polyelectrolyte multilayered nanostructures onto titanium substrates for combined antibacterial and antioxidant applications

Fabrication of nanofibers and a bacteria-triggered antibiotic-releasing coating to modify titanium substrates for antibacterial and antioxidant applications.

Innovations in gene and growth factor delivery systems for diabetic wound healing

The rise in lower extremity amputations due to nonhealing of foot ulcers in diabetic patients calls for rapid improvement in effective treatment regimens. Administration of growth factors (GFs) are thought to offer an off-the-shelf treatment; however, the dose- and time-dependent efficacy of the GFs together with the hostile environment of diabetic wound beds impose a major hindrance in the selection of an ideal route for GF delivery. As an alternative, the delivery of therapeutic genes using viral and nonviral vectors, capable of transiently expressing the genes until the recovery of the wounded tissue offers promise. The development of implantable biomaterial dressings capable of modulating the release of either single or combinatorial GFs/genes may offer solutions to this overgrowing problem. This article reviews the state of the art on gene and protein delivery and the strategic optimization of clinically adopted delivery strategies for the healing of diabetic wounds.

Strategies for Improving siRNA-Induced Gene Silencing Efficiency

Purpose: Human telomerase reverse transcriptase (hTERT) plays a crucial role in tumorigenesis and progression of cancers. Gene silencing of hTERT by short interfering RNA (siRNA) is considered as a promising strategy for cancer gene therapy. Various algorithms have been devised for designing a high efficient siRNA which is a significant issue in the clinical usage. Thereby, in the present study, the relation of siRNA designing criteria and the gene silencing efficiency was evaluated.

Methods: The siRNA sequences were designed and characterized by using on line soft wares. Cationic co-polymer (polyethylene glycol-g-polyethylene imine (PEG-g-PEI)) was used for the construction of polyelectrolyte complexes (PECs) containing siRNAs. The cellular uptake of the PECs was evaluated. The gene silencing efficiency of different siRNA sequences was investigated and the effect of observing the rational designing on the functionality of siRNAs was assessed.

Results: The size of PEG-g-PEI siRNA with N/P (Nitrogen/Phosphate) ratio of 2.5 was 114 ± 0.645 nm. The transfection efficiency of PECs was desirable (95.5% ± 2.4%.). The results of Real-Time PCR showed that main sequence (MS) reduced the hTERT expression up to 90% and control positive sequence (CPS) up to 63%. These findings demonstrated that the accessibility to the target site has priority than the other criteria such as sequence preferences and thermodynamic features.

Conclusion: siRNA opens a hopeful window in cancer therapy which provides a convenient and tolerable therapeutic approach. Thereby, using the set of criteria and rational algorithms in the designing of siRNA remarkably affect the gene silencing efficiency.

Trio Act of Boronolectin with Antibiotic-Metal Complexed Macromolecules toward Broad-Spectrum Antimicrobial Efficacy

Bacterial infections, particularly by Gram-negative pathogens, have become a serious threat to global healthcare due to the diminishing effectiveness of existing antibiotics. We report a nontraditional therapy to combine three components in one macromolecular system, in which boronic acid adheres to peptidoglycan or lipopolysaccharide via boron-polyol based boronolectin chemistry, cationic metal polymer frameworks interact with negatively charged cell membranes, and β-lactam antibiotics are reinstated with enhanced vitality to attack bacteria via evading the detrimental enzyme-catalyzed hydrolysis. These macromolecular systems exhibited high efficacy in combating pathogenic bacteria, especially Gram-negative strains, due to synergistic effects of multicomponents on interactions with bacterial cells. In vitro and in vivo cytotoxicity and hemolysis evaluation indicated that these multifunctional copolymers did not induce cell death by apoptosis, as well as did not alter the phenotypes of immune cells and did not show observable toxic effect on red blood cells.

Functional and Biomimetic Materials for Engineering of the Three-Dimensional Cell Microenvironment

The cell microenvironment has emerged as a key determinant of cell behavior and function in development, physiology, and pathophysiology. The extracellular matrix (ECM) within the cell microenvironment serves not only as a structural foundation for cells but also as a source of three-dimensional (3D) biochemical and biophysical cues that trigger and regulate cell behaviors. Increasing evidence suggests that the 3D character of the microenvironment is required for development of many critical cell responses observed in vivo, fueling a surge in the development of functional and biomimetic materials for engineering the 3D cell microenvironment. Progress in the design of such materials has improved control of cell behaviors in 3D and advanced the fields of tissue regeneration, in vitro tissue models, large-scale cell differentiation, immunotherapy, and gene therapy. However, the field is still in its infancy, and discoveries about the nature of cell-microenvironment interactions continue to overturn much early progress in the field. Key challenges continue to be dissecting the roles of chemistry, structure, mechanics, and electrophysiology in the cell microenvironment, and understanding and harnessing the roles of periodicity and drift in these factors. This review encapsulates where recent advances appear to leave the ever-shifting state of the art, and it highlights areas in which substantial potential and uncertainty remain.

Investigation of cationized triblock and diblock poly(ε-caprolactone)-co-poly(ethylene glycol) copolymers for oral delivery of enoxaparin: In vitro approach

In this study, poly(ε-caprolactone)-co-poly(ethylene glycol) copolymers grafted with a cationic ligand, propargyltrimethyl ammonium iodide (PTA), to fabricate the cationized triblock (P(CatCLCL)₂-PEG) and diblock (P(CatCLCL)-mPEG) copolymers were investigated their potential use for oral delivery of enoxaparin (ENX). Influences of various PTA contents and different structures of the copolymers on molecular characteristics, ENX encapsulation, particle characteristics, and capability of drug transport across Caco-2 cells were elucidated. The results showed that P(CatCLCL)₂-PEG and P(CatCLCL)-mPEG copolymers self-aggregated and encapsulated ENX into spherical particles of ∼200-450nm. The increasing amount of PTA on the copolymers increased encapsulation efficiency of over 90%. The ENX release from both types of the cationized copolymer particles was pH-dependent which was retarded at pH 1.2 and accelerated at pH 7.4, supporting the drug protection in the acidic environment and possible release in the blood circulation. The toxicity of ENX-loaded particles on Caco-2 cells decreased when decreasing the amount of PTA. The triblock and diblock particles dramatically enhanced ENX uptake and transport across Caco-2 cells as compared to the ENX solution. However, the different structures of the copolymers slightly affected ENX transport. These results suggested that P(CatCLCL)₂-PEG and P(CatCLCL)-mPEG copolymers would be potential carriers for oral delivery of ENX.

STATEMENT OF SIGNIFICANCE

The anionic drugs such as proteins, peptides or polysaccharides are generally administered via invasive route causing patient incompliance and high cost of hospitalization. The development of biomaterials for non-invasive delivery of those drugs has gained much attention, especially for oral delivery. However, they have limitation due to non-biocompatibility and poor drug bioavailability. In this study, the novel poly(ε-caprolactone)-co-poly(ethylene glycol) copolymers grafted with propargyltrimethyl ammonium iodide, a small cationic ligand, were introduced to use as a carrier for oral delivery of enoxaparin, a highly negatively charged drug. The study showed that these cationized copolymers could achieve high enoxaparin entrapment efficiency, protect drug release in an acidic environment and enhance enoxaparin permeability across Caco-2 cells, the intestinal cell model. These characteristics of the cationized copolymers make them a potential candidate for oral delivery of anionic drugs for biomaterial applications.

Injectable and Degradable Poly(Oligoethylene glycol methacrylate) Hydrogels with Tunable Charge Densities as Adhesive Peptide-Free Cell Scaffolds

Injectable, dual-responsive, and degradable poly(oligo ethylene glycol methacrylate) (POEGMA) hydrogels are demonstrated to offer potential for cell delivery. Charged groups were incorporated into hydrazide and aldehyde-functionalized thermoresponsive POEGMA gel precursor polymers via the copolymerization of N,N'-dimethylaminoethyl methacrylate (DMAEMA) or acrylic acid (AA) to create dual-temperature/pH-responsive in situ gelling hydrogels that can be injected via narrow gauge needles. The incorporation of charge significantly broadens the swelling, degradation, and rheological profiles achievable with injectable POEGMA hydrogels without significantly increasing nonspecific protein adsorption or chronic inflammatory responses following in vivo subcutaneous injection. However, significantly different cell responses are observed upon charge incorporation, with charged gels significantly improving 3T3 mouse fibroblast cell adhesion in 2D and successfully delivering viable and proliferating ARPE-19 human retinal epithelial cells via an "all-synthetic" matrix that does not require the incorporation of cell-adhesive peptides.

Long-acting and broad-spectrum antimicrobial electrospun poly (ε-caprolactone)/gelatin micro/nanofibers for wound dressing

Trimethoxysilylpropyl octadecyldimethyl ammonium chloride (QAS), which forms facile bonds with hydroxyl groups, acts asa cationic antibacterial agent. In this work, QAS was introduced into a polycaprolactone (PCL)/gelatin hybrid in increasing concentrations to fabricate a long-acting and broad-spectrum antimicrobial micro/nanofiber membrane as a novel wound dressing. The physical interactions and chemical bonding between QAS/PCL and QAS/gelatin were demonstrated by infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS. Measured water contact angle between the PCL-gelatin/QAS (PG-Q) nanofiber membranes suggested a hydrophobic surface, which has been shown to aid in removal of wound dressings. The mechanical strength of the membranes was sufficient to meet the clinical requirements. Furthermore, the 15% QAS (PG-Q15) and 20% QAS (PG-Q20) formulated nanofiber membranes showed a considerable increase in their bacteriostatic activity towards Staphylococcus aureus (gram-positive) and Pseudomonas aeruginosa (gram-negative) bacteria, suggesting a broad-spectrum bactericidal effect by the PG-Q membranes. The PG-Q membranes with various QAS formulations demonstrated little cytotoxicity. Therefore, the long-acting and broad-spectrum antimicrobial electrospun PG-Q micro/nanofibers membrane demonstrate potential efficacy asan antibacterial wound dressing.

PAMAM dendrimers in drug delivery: loading efficacy and polymer morphology

The binding efficacy of anticancer drugs doxorubicin and tamoxifen with polyamidoamine (PAMAM-G4) dendrimers was studied in aqueous solution at physiological pH. The results of multiple spectroscopic methods, transmission electron microscopy (TEM), and molecular modeling of conjugated drug–polymer were examined. Structural analysis showed that drug–polymer conjugation occurs mainly via H-bonding and hydrophilic and hydrophobic contacts. Doxorubicin forms a more stable conjugate with PAMAM-G4 than tamoxifen. The drug loading efficacy was 40%–50%. The TEM images showed major changes in the PAMAM morphology upon drug encapsulation. Modeling showed that drug is located in the polymer surface and in the internal cavities. PAMAM nanoparticles are capable of transporting doxorubicin and tamoxifen in vitro. This minireview presents the most recent work performed with the dendrimers demonstrating their usefulness for drug delivery in cancer therapy.

NIR Light-, Temperature-, pH-, and Redox-Responsive Polymer-Modified Reduced Graphene Oxide/Mesoporous Silica Sandwich-Like Nanocomposites for Controlled Release

Here a novel quadruple-responsive nanocarrier based on reduced graphene oxide/mesoporous silica sandwich-like nanocomposites (rGO@MS) modified by pH- and temperature-responsive poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA) with a linker of disulfide was constructed via surface-initiated atom transfer radical polymerization. The polymer chains would be used as gatekeepers to control the release of the loaded cargo molecules under pH, temperature, NIR light and redox stimuli. The cargo molecules (rhodamine B) were demonstrated to release from the polymer-modified nanocomposites triggered by the quadruple-stimuli. It is noted that the release of the loaded rhodamine B from the nanocarriers could be enhanced greatly under the synergistic effect of multiple stimuli. The prepared quadruple-responsive polymer-modified nanocomposites show a bright prospect in the field of smart nanocarriers for controlled release.

Injectable nanofibrous spongy microspheres for NR4A1 plasmid DNA transfection to reverse fibrotic degeneration and support disc regeneration

Safe and efficient gene therapy is highly desired for controlling pathogenic fibrosis of nucleus pulposus (NP) tissue, which would result in intervertebral disc (IVD) degeneration and disability if left untreated. In this work, a hyperbranched polymer (HP) with high plasmid DNA (pDNA) binding affinity and negligible cytotoxicity is synthesized, which can self-assemble into nano-sized polyplexes with a "double shell" structure that can transfect pDNA into NP cells with very high efficiency. These polyplexes are then encapsulated in biodegradable nanospheres (NS) to enable two-stage delivery: 1) temporally-controlled release of pDNA-carrying polyplexes and 2) highly efficient delivery of pDNA into cells by the released polyplexes. These biodegradable NS are co-injected with nanofibrous spongy microspheres (NF-SMS) to localize the cellular transfection of the pDNA encoding orphan nuclear receptor 4A1 (NR4A1), which was recently reported as a therapeutic agent to delay pathogenic fibrosis. It is shown that HP can transfect human NP cells efficiently in vitro with low cytotoxicity. The two-stage delivery system is able to present the polyplexes over a sustained time period (more than 30 days) in the tail of a rat. The NR4A1 pDNA carried by the HP polyplexes is found to therapeutically reduce the pathogenic fibrosis of NP tissue in a rat-tail degeneration model. In conclusion, the combination of the two-stage NR4A1 pDNA delivery NS and NF-SMS is able to repress fibrosis and to support IVD regeneration.

Cationic branched polymers for cellular delivery of negatively charged cargo

Receptor-independent cellular uptake of small molecule therapeutics is limited by their physical interaction with the negatively charged surface of cellular membranes. Passive diffusion through the hydrophobic membrane bilayer follows this process. Unless specific carriers exist in the biological membrane, such interactions limit therapeutics to those that are hydrophobic with modest positive charge at physiological pH. Small negatively charged molecules are therefore not efficient as therapeutics. To enable delivery of such molecules into eukaryotic cells, cationic branched polymers with tetraalkylammonium pendant groups were synthesized by copolymerization of a functional monomer (glycidyl methacrylate) with degradable and non-degradable divinyl crosslinkers in the presence of an efficient chain transfer agent, CBr4, followed by reaction of the multiple pendant epoxide groups and most of the alkyl bromide chain ends with amines. Cationic branched polymers with covalently attached fluorescent labels entered human cancerous and non-cancerous cells. The non-labeled analogues were able to carry anionic cargo (carboxyfluorescein) into the cells, while no uptake was observed in the absence of the cationic carriers. Most of the polymers were not significantly toxic at the concentrations used. This pilot study showed that cellular uptake of anionic small molecules can be promoted even in the absence of natural uptake mechanisms.

Transferrin-Dressed Virus-like Ternary Nanoparticles with Aggregation-Induced Emission for Targeted Delivery and Rapid Cytosolic Release of siRNA

Viruses have evolved to be outstandingly efficient at gene delivery, but their use as vectors is limited by safety risks. Inspired by the structure of viruses, we constructed a virus-mimicking vector (denoted as TR4@siRNA@Tf NCs) with virus-like architecture and infection properties. Composed of a hydrophilic peptide, an aggregation-induced emission (AIE) luminogen, and a lipophilic tail, TR4 imitates the viral capsid and endows the vector with AIE properties as well as efficient siRNA compaction. The outer glycoprotein transferrin (Tf) mimics the viral envelope protein and endows the vector with reduced cytotoxicity as well as enhanced targeting capability. Because of the strong interaction between Tf and transferrin receptors on the cell surface, the Tf coating can accelerate the intracellular release of siRNA into the cytosol. Tf and TR4 are eventually cycled back to the cell membrane. Our results confirmed that the constructed siRNA@TR4@Tf NCs show a high siRNA silencing efficiency of 85% with significantly reduced cytotoxicity. These NCs have comparable transfection ability to natural viruses while avoiding the toxicity issues associated with typical nonviral vectors. Therefore, this proposed virus-like siRNA vector, which integrates the advantages of both viral and nonviral vectors, should find many potential applications in gene therapy.

Biophysical and biological studies of some polymer grafted metallo-intercalators

Two water-soluble polymer-copper(II) complexes, [Cu(ip)₂(BPEI)](ClO₄)₂·H₂O (Complex 1) and [Cu(dppz)₂BPEI](ClO₄)₂·H₂O (Complex 2) with different degree of coordination have been synthesized and characterized. The interaction between the prepared complexes and CTDNA has been assessed by various physico-chemical methods The spectroscopic and the cyclic voltammetry studies have revealed that both the complexes interact with CTDNA through intercalation binding mode. Among the two complexes, Complex 2 has higher binding affinity with CTDNA. The antiproliferative activity of the complexes has been examined on human breast cancer cells, MDAMB231, adopting various techniques. The results indicate that both the polymer-copper(II) complexes are effective against the breast cancer cell line and the order of the activity is consistent with the DNA-binding ability.

A smart gene delivery platform: Cationic oligomer

Low transfection efficiency and high cytotoxicity of polymeric gene carriers have hampered the application of numerous polycations for gene therapy. To overcome this barrier, a cationic glycoconjugate of kanamycin and di(ethylene glycol) diacrylate was prepared via a facile approach. Nuclear magnetic resonance, Fourier transform infrared spectroscopy, and size exclusion chromatography were employed to investigate the resulting materials. Agarose gel electrophoresis, atomic force microscopy, and circular dichroism spectroscopy were used to record the interaction of the cationic oligomer and plasmid DNA. Finally, the cytotoxicity and transfection efficiency were evaluated by using COS-7 cells. The results indicated that cationic oligomers had been obtained and plasmid DNA was condensed into nanocomplexes, with a high transfection efficiency of the oligomer and a low toxicity in COS-7 cell line. It provided a novel perspective to develop gene carrier, with better safety and greater transfection efficiency, compared to traditional high molecular weight polymers.

Equilibration of Micelle-Polyelectrolyte Complexes: Mechanistic Differences between Static and Annealed Charge Distributions

The role of charge density and charge annealing in polyelectrolyte complexation was investigated through systematic comparison of two micelle-polyelectrolyte systems. First, poly(dimethylaminoethyl methacrylate)-block-poly(styrene) (PDMAEMA-b-PS) micelles were complexed with poly(styrenesulfonate) (PSS) at pH values above and below the pK_a of PDMAEMA to investigate the role of charge annealing in the complexation process. Second, complexes of poly(DMAEMA-stat-oligo(ethylene glycol) methyl ether methacrylate)-block-poly(styrene) (P(DMAEMA-stat-OEGMA)-b-PS) micelles with the same PSS at low pH were used to investigate how the complexation process differs when the charged sites are in fixed positions along the polymer chains. Characterization by turbidimetric titration, dynamic light scattering, and cryogenic transmission electron microscopy reveals that whether or not the charge distribution can rearrange during the complexation process significantly affects the structure and stability of the complexes. In complexes of PDMAEMA-b-PS micelles at elevated pH, in which the charge distributions can anneal, the charge sites redistribute along the corona chains upon complexation to favor more fully ion-paired configurations. This promotes rapid rearrangement to single-micelle species when the micelles are in excess but traps complexes formed with PSS in excess. In complexes with static charge distributions introduced by copolymerization of DMAEMA with neutral OEGMA monomers, on the other hand, the opposite is true: in this case, reducing the charge density promotes rearrangement to single-micelle complexes only when the polyanion is in excess. Molecular dynamics simulations show that disruption of the charge density in the corona brush reduces the barrier to rearrangement of individual ion pairs, suggesting that the inability of the brush to rearrange to form fully ion-paired complexes fundamentally alters the kinetics of complex formation and equilibration.

Comparative study of cytotoxicity and genotoxicity of commercial Jeffamines® and polyethylenimine in CHO-K1 cells

Jeffamines^® are a family of polymers containing primary amine groups attached to the extremities of polyether backbone which can be used as biomaterials. They have been used in combination with polyethylenimine (PEI) to improve biocompatibility in drug and gene delivery systems. Despite these facts, very few studies have been done on cytotoxicity and genotoxicity of pure Jeffamines^® or compared with PEI. The present study aimed to evaluate and compare the cytotoxic and genotoxic effects of Jeffamines^® and PEI in CHO-K1 cells. Specifically, polypropylene oxide 2000 (PPO 2000, Jeffamine^® D series), polyethylene oxide 1900 (PEO 1900, Jeffamine^® ED series), branched 25 kDa PEI, and linear 20 kDa PEI were evaluated at different concentrations. Cell viability and proliferation were assessed by 2,3-bis-(2-methoxy-4-nitro-5-sulfophenyl)-2H-tetrazolium-5-carboxanilide (XTT) and 5-bromo-2'-deoxyuridine (BrdU) assays, respectively. Genotoxicity was evaluated using single cell gel electrophoresis assay and the cytokinesis-blocked micronucleus assay. PPO 2000 was the most cytotoxic Jeffamine^® , whereas PEO 1900 did not caused significant cell death at any tested concentration. Branched PEI was more cytotoxic than linear PEI (LPEI) and both were more cytotoxic than Jeffamines^® . Only PPO 2000 induced DNA damage when evaluated in comet assay probably due to its cytotoxicity. PPO 2000, PEO 1900, and PEI did not increase the frequency of micronuclei when tested at sub-cytotoxic concentrations. This work provides new insights about biocompatibility of Jeffamines^® and PEI and suggests the genotoxicological safety for further investigations of PEO 1900 in drug and gene delivery systems. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 742-750, 2018.

Convergent Approach to Boronic Acid Functionalized Polycarbonates: Accessing New Dynamic Material Platforms

Polycarbonates are routinely utilized for diverse medicinal applications and are highly efficacious scaffolds for drug delivery and antimicrobial treatments. In order to provide for robust, dynamic platforms for biomedical applications, we have developed new routes for the incorporation of boronic acids into the polycarbonate backbone. These routes take advantage of straightforward postsynthesis modification of established polycarbonate backbones, enabling the preparation of a diverse array of boronic acid functionalized polycarbonates from readily accessible polycarbonates. In particular, this approach circumvents the need for de novo monomer synthesis, functional group incompatibilities, and deprotection steps that often limit other methods. This strategy has been demonstrated using a broad array of unprotected boronic acids to produce both neutral and cationic boronic acid functionalized polycarbonates.

Influence of Substituent Chain Branching on the Transfection Efficacy of Cyclopropenium-Based Polymers

The realization of gene therapy relies on the development of delivery vectors with high efficiency and biocompatibility. With a multitude of structures accessible, the core challenge is precisely tuning vector structure to probe and optimize structure⁻property relationships. Employing a modular strategy, two pairs of cationic polymers based on the trisaminocyclopropenium (TAC) ion were synthesized where the substituents differ in the degree of alkyl chain branching. All TAC-based polymers exhibited higher transfection efficiencies than the untreated controls, with variable in vitro toxicities. Considering both cytotoxicity and transfection efficacy, an optimal nonviral vector was identified. Our studies highlight the importance of exercising precise control over polymer structure, both in terms of backbone identity and substituent nature, and the necessity of a robust, modular platform from which to study them.

Tuning the Molar Composition of "Charge-Shifting" Cationic Copolymers Based on 2-(N,N-Dimethylamino)Ethyl Acrylate and 2-(tert-Boc-Amino)Ethyl Acrylate

Copolymers of 2-(N,N-dimethylamino)ethyl acrylate (DMAEA) and 2-(tert-Boc-amino)ethyl acrylate (tBocAEA) are synthesized by reversible addition-fragmentation chain transfer polymerization in a controlled manner with defined molar masses and narrow molar masses distributions (Ð ≤ 1.17). Molar compositions of the P(DMAEA-co-tBocAEA) copolymers are assessed by means of ¹ H NMR. A complete screening in molar composition is studied from 0% of DMAEA to 100% of DMAEA. Reactivity ratios of both comonomers are determined by the extended Kelen-Tüdos method (r _DMAEA = 0.81 and r_tBocAEA = 0.99).

An amphiphilic non-viral gene vector prepared by a combination of enzymatic atom transfer radical polymerization and enzymatic ring-opening polymerization

An amphiphilic non-viral gene vector (PCL-b-PGEA) was prepared by a combination of enzymatic ring-opening polymerization and enzymatic atom transfer radical polymerization for the first time and the kinetic features and gene delivery properties were investigated.

Calcium triggered self-assembly of alginate-graft-POEGMA via RAFT for the encapsulation of lipophillic actives

Self-assembly of alginate into nanoparticles was realized by grafting hydrophilic brushes via RAFT.