Isolated Single Iron Atoms Anchored on N-Doped Porous Carbon as an Efficient Electrocatalyst for the Oxygen Reduction Reaction

Toward a mechanistic understanding of electrocatalytic nanocarbon

Electrocatalytic nanocarbon (EN) is a class of material receiving intense interest as a potential replacement for expensive, metal-based electrocatalysts for energy conversion and chemical production applications. The further development of EN will require an intricate knowledge of its catalytic behaviors, however, the true nature of their electrocatalytic activity remains elusive. This review highlights work that contributed valuable knowledge in the elucidation of EN catalytic mechanisms. Experimental evidence from spectroscopic studies and well-defined molecular models, along with the survey of computational studies, is summarized to document our current mechanistic understanding of EN-catalyzed oxygen, carbon dioxide and nitrogen electrochemistry. We hope this review will inspire future development of synthetic methods and in situ spectroscopic tools to make and study well-defined EN structures.

Effective Low-Temperature Methanol Aqueous Phase Reforming with Metal-Free Carbon Dots/C3N4 Composites

Methanol aqueous phase reforming (MAPR) reaction under mild conditions is one of the most practical ways to generate hydrogen (H₂), in which the liquid vaporization unit could be removed by the water phase reforming, making the structure of an in situ H₂ production reactor more compact. In this work, the H₂ production performances of the metal-free catalyst, N-doped carbon dots/g-C₃N₄ (NCDs/g-C₃N₄; CN-x) composites, was investigated for the MAPR reaction under low temperature and normal pressure. The optimized metal-free catalyst (NCDs/g-C₃N₄; CN-0.7) displays a H₂ yield of 19.5 μmol g^-1 h^-1 at 80 °C. More importantly, a clear understanding on the effective MAPR reaction at low temperature and normal pressure was acquired from in situ diffuse reflectance FTIR spectroscopy and the transient photovoltage test. The introduction of NCDs leads to the localization of surface charge, which is beneficial to the selective adsorption and polarization activation of polar molecules on the catalyst surface. This work provides a new strategy for the carbon-based catalyst design of the MAPR reaction at low temperatures.

MIL-101-Derived Mesoporous Carbon Supporting Highly Exposed Fe Single-Atom Sites as Efficient Oxygen Reduction Reaction Catalysts

Fe single-atom catalysts (Fe SACs) with atomic FeN_x active sites are very promising alternatives to platinum-based catalysts for the oxygen reduction reaction (ORR). The pyrolysis of metal-organic frameworks (MOFs) is a common approach for preparing Fe SACs, though most MOF-derived catalysts reported to date are microporous and thus suffer from poor mass transfer and a high proportion of catalytically inaccessible FeN_x active sites. Herein, NH₂ -MIL-101(Al), a MOF possessing a mesoporous cage architecture, is used as the precursor to prepare a series of N-doped carbon supports (denoted herein as NC-MIL101-T) with a well-defined mesoporous structure at different pyrolysis temperatures. The NC-MIL101-T supports are then impregnated with a Fe(II)-phenanthroline complex, and heated again to yield Fe SAC-MIL101-T catalysts rich in accessible FeN_x single atom sites. The best performing Fe SAC-MIL101-1000 catalyst offers outstanding ORR activity in alkaline media, evidenced by an ORR half-wave potential of 0.94 V (vs RHE) in 0.1 m KOH, as well as excellent performance in both aqueous primary zinc-air batteries (a near maximum theoretical energy density of 984.2 Wh kg_Zn ^-1 ) and solid-state zinc-air batteries (a peak power density of 50.6 mW cm^-2 and a specific capacity of 724.0 mAh kg_Zn ^-1 ).

Alkali-induced Transformation of Ni-MOF into Ni(OH)2 Nanostructured Flowers for Efficient Electrocatalytic Methanol Oxidation Reaction

Post treatment of metal-organic frameworks (MOFs) is widely employed to develop efficient electrocatalysts with better catalytic properties. But the complex processes of post treatment generally led to the collapse of the original structures of MOFs, making the preservation of their pristine hierarchical porous structure a great challenge. Herein, we propose the strategy of alkali treatment of Ni-MOF to transform it into Ni(OH)₂ with similar morphology and enhanced electrocatalytic properties for methanol oxidation reaction (MOR). The structure and electrocatalytic properties of as-obtained Ni(OH)₂ nanostructured flowers were seriously depended on the alkali concentrations. As the result, Ni(OH)₂ obtained from Ni-MOF treated by 0.25 M NaOH (noted as Ni(OH)₂ -0.25) performs 1.5 and 2.5 times larger current density than those of Ni(OH)₂ -0.025 and Ni(OH)₂ -0.5 for MOR. Moreover, the electrocatalytic process and mechanism of MOR on the catalyst of Ni(OH)₂ -0.25 are also revealed. Hence, this ex situ conversion strategy of alkali treatment for Ni-MOF uncovered the transformation of MOFs in alkaline solution and develops robust electrocatalyst for practical application of methanol fuel cells.

MOFs-Derived Carbon-Based Metal Catalysts for Energy-Related Electrocatalysis

Electrochemical devices, as renewable and clean energy systems, display a great potential to meet the sustainable development in the future. However, well-designed and highly efficient electrocatalysts are the technological dilemmas that retard their practical applications. Metal-organic frameworks (MOFs) derived electrocatalysts exhibit tunable structure and intriguing activity and have received intensive investigation in recent years. In this review, the recent progress of MOFs-derived carbon-based single atoms (SAs) and metal nanoparticles (NPs) catalysts for energy-related electrocatalysis is summarized. The effects of synthesis strategy, coordination environment, morphology, and composition on the catalytic activity are highlighted. Furthermore, these SAs and metal NPs catalysts for the applications of electrocatalysis (hydrogen evolution reaction, oxygen evolution reaction, oxygen reduction reaction, carbon dioxide reduction reaction, and nitrogen reduction reaction) are overviewed. Finally, some current challenges and foresighted ideas for MOFs-derived carbon-based metal electrocatalysts are presented.

Cr cation-anchored carbon nanosheets: synthesis, paramagnetism and ferromagnetism

Since the successfully synthesis of monolayer graphene, carbon-based materials have attracted wide and extensive attentions from researches. Due to the excellent transport capacity and conductivity, they are promising to be applied in electronic devices, even substituting the silicon-based electronic devices, optoelectronics and spintronics. Nevertheless, due to the non magnetic feature, many efforts have been devoted to endow carbon materials magnetism to apply them in the spintronic devices fabrication. Herein, a strategy of Cr cation solely anchored on two-dimensional carbon nanosheets by Cr-N bonds is developed, which introduces magnetism in carbon nanosheets. By extended x-ray absorption fine structure characterization, Cr cations are demonstrated to be atomically dispersed with Cr-N₃coordination. And after Cr-N₃anchored, carbon nanosheets exhibit ferromagnetic features with paramagnetic background. The magnetization varies with Cr content and reaches the maximum (Cr: 2.0%, 0.86 emu g^-1) under 3 T at 50 K. The x-ray magnetic circular dichroism and first-principle calculations indicate that the magnetism is caused by the Cr³⁺component of the anchored Cr cations. This study sets a single cation anchoring carbon as a suitable candidate for future spintronics.

Highly Dispersive Cerium Atoms on Carbon Nanowires as Oxygen Reduction Reaction Electrocatalysts for Zn-Air Batteries

Highly efficient noble-metal-free electrocatalysts for oxygen reduction reaction (ORR) are essential to reduce the costs of fuel cells and metal-air batteries. Herein, a single-atom Ce-N-C catalyst, constructed of atomically dispersed Ce anchored on N-doped porous carbon nanowires, is proposed to boost the ORR. This catalyst has a high Ce content of 8.55 wt % and a high activity with ORR half-wave potentials of 0.88 V in alkaline media and 0.75 V in acidic electrolytes, which are comparable to widely studied Fe-N-C catalysts. A Zn-air battery based on this material shows excellent performance and durability. Density functional theory calculations reveal that atomically dispersed Ce with adsorbed hydroxyl species (OH) can significantly reduce the energy barrier of the rate-determining step resulting in an improved ORR activity.

Single-Atom Fe Catalyst Outperforms Its Homogeneous Counterpart for Activating Peroxymonosulfate to Achieve Effective Degradation of Organic Contaminants

Recently, reactive iron species (RFeS) have shown great potential for the selective degradation of emerging organic contaminants (EOCs). However, the rapid generation of RFeS for the selective and efficient degradation of EOCs over a wide pH range is still challenging. Herein, we constructed FeN₄ structures on a carbon nanotube (CNT) to obtain single-atom catalysts (Fe_SA-N-CNT) to generate RFeS in the presence of peroxymonosulfate (PMS). The obtained Fe_SA-N-CNT/PMS system exhibited outstanding and selective reactivity for oxidizing EOCs over a wide pH range (3.0-9.0). Several lines of evidences suggested that RFeS existing as an FeN₄═O intermediate was the predominant oxidant, while SO₄^·- and HO^· were the secondary oxidants. Density functional theory calculation results revealed that a CNT played a key role in optimizing the distribution of bonding and antibonding states in the Fe 3d orbital, resulting in the outstanding ability of Fe_SA-N-CNT for PMS chemical adsorption and activation. Moreover, CNT could significantly enhance the reactivity of the FeN₄═O intermediate by increasing the overlap of electrons of the Fe 3d orbital, O 2p orbital, and bisphenol A near the Fermi level. The results of this study can advance the understanding of RFeS generation in a heterogeneous system over a wide pH range and the application of RFeS in real practice.

Single-atom catalysts for high-energy rechargeable batteries

Clean and sustainable electrochemical energy storage has attracted extensive attention. It remains a great challenge to achieve next-generation rechargeable battery systems with high energy density, good rate capability, excellent cycling stability, efficient active material utilization, and high coulombic efficiency. Many catalysts have been explored to promote electrochemical reactions during the charge and discharge process. Among reported catalysts, single-atom catalysts (SACs) have attracted extensive attention due to their maximum atom utilization efficiency, homogenous active centres, and unique reaction mechanisms. In this perspective, we summarize the recent advances of the synthesis methods for SACs and highlight the recent progress of SACs for a new generation of rechargeable batteries, including lithium/sodium metal batteries, lithium/sodium-sulfur batteries, lithium-oxygen batteries, and zinc-air batteries. The challenges and perspectives for the future development of SACs are discussed to shed light on the future research of SACs for boosting the performances of rechargeable batteries.

Precisely Engineering Architectures of Co/C Sub-Microreactors for Selective Syngas Conversion

Fischer-Tropsch synthesis (FTS) is an effective route to produce olefins, gasoline, diesel, and oxygenates from syngas (CO + H₂ ). However, it still remains a challenge for regulating the product distribution of FTS. Here, a series of Co/C sub-microreactors with precise designed nanoarchitectures are synthesized for selective syngas conversion. Through a combination of surface protection-assisted etching and following carbonization process, Co/C sub-microreactors with solid cube, double-shelled hollow box, and hollow box architectures, namely, Co/C-Cube, Co/C-DBox, Co/C-Box can be obtained. In FTS, comparing with solid Co/C-Cube, double-shelled hollow structured Co/C-DBox is inclined to grow long-chain hydrocarbon products, whereas hollow structured Co/C-Box avails the formation of short-chain hydrocarbon chemicals. Therefore, shape selective catalysis and controlled product distribution of FTS are realized by tuning the architectures of Co/C sub-microreactors. It is expected to fundamentally unravel the heterogeneous catalytic process via upfront designing and precisely regulating the architectures of micro/nanoreactors.

Solid-State Synthesis of Highly Dispersed Nitrogen-Coordinated Single Iron Atom Electrocatalysts for Proton Exchange Membrane Fuel Cells

Fe-N-C with atomically dispersed Fe single atoms is the most promising candidate to replace platinum for the oxygen reduction reaction (ORR) in fuel cells. However, the conventional synthesis procedures require quantities solvents and metal precursors, sluggish adsorption process, and tedious washing, resulting in limited metal doping and uneconomical for large-scale production. For the first time, Fe₂O₃ is adopted as the Fe precursor to derive abundant single Fe atoms dispersed on carbon surfaces. The Fe-N-C catalyst synthesized by this simple method shows an excellent ORR activity with half-wave potentials of 0.82 and 0.90 V in acidic and alkaline solutions, respectively. A single fuel cell with an optimized Fe-N-C cathode shows a high peak power density of 0.84 W cm^-2. The solid-state transformation synthesis method developed in this study may shed light on mass production of single-atom-based catalysts.

Atomic-level engineering of two-dimensional electrocatalysts for CO2 reduction

Carbon dioxide (CO₂) from the excessive consumption of fossil fuels has exhibited a huge threat to the planet's ecosystem. Electrocatalytic CO₂ reduction into value-added chemicals has been regarded as a promising strategy in CO₂ utilization and needs the development of advanced electrocatalysts for lowering the activation energy and enhancing selectivity in CO₂ reduction. Two-dimensional (2D) materials, benefiting from their unique geometrical structures, have been extensively studied in the electrocatalytic CO₂ reduction reaction (CO₂RR). In this review, we systematically overview atomic-level engineering strategies in 2D electrocatalysts for the CO₂RR, including thickness control, elemental doping, vacancy engineering, heterostructure construction, and single-atom loading. Meanwhile, we analyze the relationship between structures and activity in electrocatalysis, and present the future challenges and opportunities in the electrocatalytic CO₂RR, and we hope that this review will offer helpful guidance for developing electrocatalysts for the CO₂RR.

Atomically Dispersed Cobalt Sites on Graphene as Efficient Periodate Activators for Selective Organic Pollutant Degradation

Pollutant degradation via periodate (IO₄^-)-based advanced oxidation processes (AOPs) provides an economical, energy-efficient way for sustainable pollution control. Although single-atomic metal activation (SMA) can be exploited to optimize the pollution degradation process and understand the associated mechanisms governing IO₄^--based AOPs, studies on this topic are rare. Herein, we demonstrated the first instance of using SMA for IO₄^- analysis by employing atomically dispersed Co active sites supported by N-doped graphene (N-rGO-CoSA) activators. N-rGO-CoSA efficiently activated IO₄^- for organic pollutant degradation over a wide pH range without producing radical species. The IO₄^- species underwent stoichiometric decomposition to generate the iodate (IO₃^-) species. Whereas Co²⁺ and Co₃O₄ could not drive IO₄^- activation; the Co-N coordination sites exhibited high activation efficiency. The conductive graphene matrix reduced the contaminants/electron transport distance/resistance for these oxidation reactions and boosted the activation capacity by working in conjunction with metal centers. The N-rGO-CoSA/IO₄^- system exhibited a substrate-dependent reactivity that was not caused by iodyl (IO₃^·) radicals. Electrochemical experiments demonstrated that the N-rGO-CoSA/IO₄^- system decomposed organic pollutants via electron-transfer-mediated nonradical processes, where N-rGO-CoSA/periodate* metastable complexes were the predominant oxidants, thereby opening a new avenue for designing efficient IO₄^- activators for the selective oxidation of organic pollutants.

Enhanced Fenton-like efficiency by the synergistic effect of oxygen vacancies and organics adsorption on FexOy-d-g-C3N4 with Fe‒N complexation

d-g-C₃N₄-Fe composites was prepared via a self-assembly and calcination process. According to measurements and density functional theory (DFT) computations, the complexation of iron and pyridinic N of g-C₃N₄ (Fe‒N) occurred with Fe(III)-π interaction, causing more oxygen vacancies (OVs) with more electrons in iron oxides. In the catalyst air-saturated suspension, the adsorbed pollutants complexed surface Fe(III) through their hydroxyl group donated electrons to around OVs, reducing the surface Fe(III) to Fe(II) and were destructed by Fe(III)-π interaction of the complexation. The addition of H₂O₂ mainly acted as acceptor being reduced ^•OH at the OV centers, causing higher degradation rate of pollutants due to both ^•OH and the surface reaction. However, for the adsorbed hydrophobic pollutants onto the sites of peripheral structure in g-C₃N₄, H₂O₂ was mainly decomposed into O₂ by the synergistic effect of iron species and OVs. Therefore, the catalyst exhibited high Fenton-like efficiency for the degradation of hydroxyl-containing pollutants and hydrophobic pollutants mixing with the former. Our results demonstrate that the Fe(III)-π interaction could carry out the oxidation of pollutants on the catalyst surface, decreasing the consumption of H₂O₂, and the role of OVs depends on pollutant adsorption patterns.

Rh particles in N-doped porous carbon materials derived from ZIF-8 as an efficient bifunctional electrocatalyst for the ORR and HER

Durable and efficient electrocatalysts toward the oxygen reduction reaction (ORR) and hydrogen evolution reaction (HER) are crucial to the development of sustainable energy conversion. In this article, we report a highly active bifunctional electrocatalyst derived from ZIF-8 through simple heat-treatment activation. The resultant catalyst is enriched with Rh nanoparticles in the carbon matrix, showing excellent ORR performance with a half-wave potential (E 1/2) of 0.803 V in alkaline electrolytes; it is simultaneously active for catalyzing the HER with an overpotential of 89 mV to reach a current density of 10 mA cm2 in acidic electrolytes. The prepared RhNC-900 catalyst (1.47 wt% Rh) is comparable to the commercial Pt/C catalyst (20 wt% Pt) in terms of the ORR in alkaline media and might inspire new ideas for the development of fuel cells and water splitting.

Thermally Controlled Construction of Fe-Nx Active Sites on the Edge of a Graphene Nanoribbon for an Electrocatalytic Oxygen Reduction Reaction

Pyrolytically prepared iron and nitrogen codoped carbon (Fe/N/C) catalysts are promising nonprecious metal electrocatalysts for the oxygen reduction reaction (ORR) in fuel cell applications. Fabrication of the Fe/N/C catalysts with Fe-N_x active sites having precise structures is now required. We developed a strategy for thermally controlled construction of the Fe-N_x structure in Fe/N/C catalysts by applying a bottom-up synthetic methodology based on a N-doped graphene nanoribbon (N-GNR). The preorganized aromatic rings within the precursors assist graphitization during generation of the N-GNR structure with iron-coordinating sites. The Fe/N/C catalyst prepared from the N-GNR precursor, iron ion, and the carbon support Vulcan XC-72R provides a high onset potential of 0.88 V (vs reversible hydrogen electrode (RHE)) and promotes efficient four-electron ORR. X-ray absorption fine structure (XAFS) and X-ray photoelectron spectroscopy (XPS) studies reveal that the N-GNR precursor induces the formation of iron-coordinating nitrogen species during pyrolysis. The details of the graphitization process of the precursor were further investigated by analyzing the precursors pyrolyzed at various temperatures using MgO particles as a sacrificial template, with the results indicating that the graphitized structure was obtained at 700 °C. The preorganized N-GNR precursors and its pyrolysis conditions for graphitization are found to be important factors for generation of the Fe-N_x active sites along with the N-GNR structure in high-performance Fe/N/C catalysts for the ORR.

Enhanced Fenton-like degradation of sulfadiazine by single atom iron materials fixed on nitrogen-doped porous carbon

The use of single-atom iron catalysts in heterogeneous Fenton-like reactions has demonstrated tremendous potential for antibiotic wastewater treatment. In this study, single-atom iron fixed on nitrogen-doped porous carbon materials (Fe-ISAs@CN) was synthesised using a metal organic framework (MOF) as a precursor. Fe-ISAs@CN was applied as a heterogeneous Fenton catalyst to activate H₂O₂ for the degradation of sulfadiazine (SDZ) in an aqueous solution. The physical and chemical properties of Fe-ISAs@CN were characterised by scanning electron microscopy (SEM), transmission electron microscope (TEM), high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and rotating disk electrode (RDE) measurements. The results of our degradation experiments indicated that Fe-ISAs@CN exhibited remarkable activity and stability for the degradation of SDZ over a wide pH range; even after five cycles, Fe-ISAs@CN retained a high catalytic efficiency (>80%). The 5,5-dimethyl-1-oxaporphyrin-n-oxide (DMPO)-X signal captured by electron paramagnetic resonance (EPR) spectroscopy indicated that a large amount of hydroxyl radicals (OH) was produced in the reaction system. Quench tests indicated that the OH was the main active substance in the degradation of SDZ. The degradation products of the reaction were analysed by High Performance Liquid Chromatography-Mass Spectrometry (HPLC-MS), and possible degradation pathways for the SDZ degradation were proposed.

Single-Atom Catalysts: A Sustainable Pathway for the Advanced Catalytic Applications

A heterogeneous catalyst is a backbone of modern sustainable green industries; and understanding the relationship between its structure and properties is the key for its advancement. Recently, many upscaling synthesis strategies for the development of a variety of respectable control atomically precise heterogeneous catalysts are reported and explored for various important applications in catalysis for energy and environmental remediation. Precise atomic-scale control of catalysts has allowed to significantly increase activity, selectivity, and in some cases stability. This approach has proved to be relevant in various energy and environmental related technologies such as fuel cell, chemical reactors for organic synthesis, and environmental remediation. Therefore, this review aims to critically analyze the recent progress on single-atom catalysts (SACs) application in oxygen reduction reaction, oxygen evolution reaction, hydrogen evolution reaction, and chemical and/or electrochemical organic transformations. Finally, opportunities that may open up in the future are summarized, along with suggesting new applications for possible exploitation of SACs.

An Ion-Imprinting Derived Strategy to Synthesize Single-Atom Iron Electrocatalysts for Oxygen Reduction

Carbon-based single-atom catalysts (CSACs) have recently received extensive attention in catalysis research. However, the preparation process of CSACs involves a high-temperature treatment, during which metal atoms are mobile and aggregated into nanoparticles, detrimental to the catalytic performance. Herein, an ion-imprinting derived strategy is proposed to synthesize CSACs, in which isolated metal-nitrogen-carbon (Me-N₄ -C_x ) moiety covalently binds oxygen atoms in Si-based molecular sieve frameworks. Such a feature makes Me-N₄ -C_x moiety well protected/confined during the heat treatment, resulting in the final material enriched with single-atom metal active sites. As a proof of concept, a single-atom Fe-N-C catalyst is synthesized by using this ion-imprinting derived strategy. Experimental results and theoretical calculations demonstrate high concentration of single FeN₄ active sites distributed in this catalyst, resulting in an outstanding oxygen reduction reaction (ORR) performance with a half-wave potential of 0.908 V in alkaline media.

Carbon-Supported Single-Atom Catalysts for Formic Acid Oxidation and Oxygen Reduction Reactions

The commercialization of fuel cells, especially for direct formic acid fuel cells (DFAFCs) and proton-exchange membrane fuel cells (PEMFCs), is significantly restrained by the high cost, poor stability, and sluggish kinetics of platinum group metals (PGM) catalysts for both the anodic formic acid oxidation reaction (FAOR) and the cathodic oxygen reduction reaction (ORR). Currently, it has confronted with challenges, including exploring highly active, cost-effective, and stable catalysts to replace PGM for DFAFCs and PEMFCs. Recently, the increasing investigation has been focused on the single-atom catalysts (SACs) to enhance the catalytic performance owing to the maximum atom utilization and highly exposed active sites. The aim of this review is to present the recent research activities on carbon supported SACs. At the beginning of the review, metal-based SACs supported on different carbon supports, and the typical characterization methods are introduced. Subsequently, recent advances in metal-based SACs for FAOR and ORR catalysis are scientifically summarized. Particularly, some representative metal-based SACs for ORR activity are further exemplified with a deeper understanding of structure-activity relationships. Finally, the challenges and opportunities of SACs are prospected, such as the mechanism understanding and commercial applications.

Single-Atom Catalysts Derived from Metal-Organic Frameworks for Electrochemical Applications

Single-atom catalysts (SACs) have received tremendous attention due to their extraordinary catalytic performances. The synthesis of this kind of catalysts is highly desired and challenging. In the last few years, metal-organic frameworks (MOFs) have been demonstrated as a promising precursor for fabricating SACs. In this review, the progress and recent advances in the synthesis of MOF-derived SACs and their electrochemical applications are summarized. First, the synthetic approaches based on MOFs and accessible characterization techniques for SACs as well as their advantages/disadvantages are discussed. Then, the electrochemical applications of these MOF-derived SACs including the oxygen reduction reaction (ORR), oxygen evolution reaction (OER), hydrogen evolution reaction (HER), CO₂ reduction reaction (CO₂ RR), nitrogen reduction reaction (NRR), and other energy-related reactions are reviewed. Finally, insights into the current challenges and future prospects of this field are briefly presented.

Facile synthesis of CNT interconnected PVP-ZIF-8 derived hierarchically porous Zn/N co-doped carbon frameworks for oxygen reduction

In this work, a strategy has been adopted to construct an architecture through the coordination of polyvinylpyrrolidone (PVP) and a monodisperse zeolitic imidazolate framework (ZIF-8), which was entwined by carbon nanotubes (CNTs) firstly, followed by a pyrolysis process to obtain the hybrid catalyst. The meticulous design of the hybrid material using CNTs to interconnect the PVP assisted ZIF-8 derived porous carbon frameworks together produces a hierarchical pore structure and dual-heteroatom (Zn/N) doping (Zn-N/PC@CNT). Without further acid treatment, the hybrid material prepared after pyrolysis at 900 °C (PVP-ZIF-8@CNT-900) has been demonstrated as an efficient non-precious metal catalyst for the oxygen reduction reaction (ORR) with its superior stability compared to the commercial 20 wt% Pt/C catalyst in alkaline media. The catalyst shows better performance towards the ORR, with its more positive onset and half-wave potentials (E_onset = 0.960 V vs. RHE and E_1/2 = 0.795 V vs. RHE) than the counterpart system which is free of both CNT and PVP. The high performance of the hybrid catalyst can be ascribed to the co-existence of dual-active sites with hierarchical pore structures originating from the synergistic effects between Zn/N co-doped porous carbon and CNTs. We further demonstrated the single-cell performance by using the homemade system as the cathode catalyst for the Alkaline Exchange Membrane Fuel Cell (AEMFC) system, which showed a maximum power density of 45 mW cm^-2 compared to 60 mW cm^-2 obtained from the 40 wt% Pt/C catalyst.

Single site Fe on the (110) surface of γ-Al2O3: insights from a DFT study including the periodic boundary approach

Examination of the stable (110) surface of γ-alumina reveals that there are three different types of sites available to host a single Fe atom. With the carefully calibrated density functional approach (M12-L/SV), three types of Fe single sites on the (110) surface of γ-alumina have been investigated under the periodic boundary conditions. The most stable Fe replacement site on the (110) surface of γ-alumina has been found to be represented by the tri-coordinated Fe_I position with the quartet spin state. The replacement of Al by Fe atoms at the Al site leads to charge redistributions of the neighboring O atoms. However, sublayer charge distribution is less affected. A significant contribution of p orbitals of the O atoms in the surface phase to the LUMO has been found for the tri-coordinated Fe_I substitution on the (110) surface. The corresponding oxygen atoms (O_A and O_A1) have been activated due to the existence of Fe_I in their neighborhood. The loosened neighboring Al_III-O_A bonds match this activation. This activation of O suggests the existence of an important source of the reactive O during the Fe catalytic oxidation of CO processes.

Development of a highly active FeNC catalyst with the preferential formation of atomic iron sites for oxygen reduction in alkaline and acidic electrolytes

Nitrogen-doped porous carbons containing atomically dispersed iron are prime candidates for substituting platinum-based catalysts for oxygen reduction reaction (ORR) in fuel cells. These carbon catalysts are classically synthesizedviacomplicated routes involving multiple heat-treatment steps to form the desired Fe-N_x sites. We herein developed a highly active FeNC catalyst comprising of exclusive Fe-N_x sites by a simplified solid-state synthesis protocol involving only a single heat-treatment. Imidazole is pyrolyzed in the presence of an inorganic salt-melt resulting in highly porous carbon sheets decorated with abundant Fe-N_x centers, which yielded a high density of electrochemically accessible active sites (1.36 × 10¹⁹ sites g^-1) as determined by the in situ nitrite stripping technique. The optimized catalyst delivered a remarkable ORR activity with a half-wave potential (E_1/2) of 0.905 V_RHE in alkaline electrolyte surpassing the benchmark Pt catalyst by 55 mV. In acidic electrolyte, an E_1/2 of 0.760 V_RHE is achieved at a low loading level (0.29 mg cm^-2). In PEMFC tests, a current density of 2.3 mA cm^-2 is achieved at 0.90 V_iR-free under H₂-O₂ conditions, reflecting high kinetic activity of the optimized catalyst.

Regulating Fe-spin state by atomically dispersed Mn-N in Fe-N-C catalysts with high oxygen reduction activity

As low-cost electrocatalysts for oxygen reduction reaction applied to fuel cells and metal-air batteries, atomic-dispersed transition metal-nitrogen-carbon materials are emerging, but the genuine mechanism thereof is still arguable. Herein, by rational design and synthesis of dual-metal atomically dispersed Fe,Mn/N-C catalyst as model object, we unravel that the O₂ reduction preferentially takes place on Fe^III in the FeN₄ /C system with intermediate spin state which possesses one e_g electron (t_2g4e_g1) readily penetrating the antibonding π-orbital of oxygen. Both magnetic measurements and theoretical calculation reveal that the adjacent atomically dispersed Mn-N moieties can effectively activate the Fe^III sites by both spin-state transition and electronic modulation, rendering the excellent ORR performances of Fe,Mn/N-C in both alkaline and acidic media (halfwave positionals are 0.928 V in 0.1 M KOH, and 0.804 V in 0.1 M HClO₄), and good durability, which outperforms and has almost the same activity of commercial Pt/C, respectively. In addition, it presents a superior power density of 160.8 mW cm⁻² and long-term durability in reversible zinc–air batteries. The work brings new insight into the oxygen reduction reaction process on the metal-nitrogen-carbon active sites, undoubtedly leading the exploration towards high effective low-cost non-precious catalysts.

The working mechanism of several low-cost electrocatalyst materials is still arguable. Here the authors show a model Fe,Mn/N-C catalyst where the oxygen reduction preferentially takes place on Fe(III) sites with the intermediate spin state (t2g4 eg1) caused by the adjacent Mn-N moieties.

Bifunctional single-atomic Mn sites for energy-efficient hydrogen production

The electrocatalytic hydrogen evolution reaction (HER) for H2 production is essential for future renewable and clean energy technology. Screening energy-saving, low-cost, and highly active catalysts efficiently, however, is still a grand challenge due to the sluggish kinetics of the oxygen evolution reaction (OER) in electrolyzing water. Herein, we present a single atomic Mn site anchored on a boron nitrogen co-doped carbon nanotube array (Mn-SA/BNC), which is perfectly combined with the hydrazine electrooxidation reaction (HzOR) boosted water electrolysis concept. The obtained catalyst achieves 51 mV overpotential at the current density of -10 mA cm-2 for the cathodic HER and 132 mV versus the reversible hydrogen electrode for HzOR, respectively. Besides, in a two-electrode overall hydrazine splitting (OHzS) system, the Mn-SA/BNC catalyst only needs a cell voltage of only 0.41 V to output 10 mA cm-1, with strong durability and nearly 100% faradaic efficiency for H2 production. This work highlights a low-cost and high-efficiency energy-saving H2 production pathway.

ZIF-8 derived Fe‒N coordination moieties anchored carbon nanocubes for efficient peroxymonosulfate activation via non-radical pathways: Role of FeNx sites

Developing high-efficient hybrids carbon catalysts for PMS-based advanced oxidation process (AOPs) are crucial in the field of environmental remediation. In this work, novel carbon nanocubes (xFe‒N‒C) with three-dimensional porous structure and abundant well-dispersed FeN_x sites were obtained via a skillful cage-encapsulated-precursor pyrolysis strategy. The as-synthesized xFe‒N‒C exhibited superb activity for phenol degradation by activating peroxymonosulfate (PMS). Besides, the catalytic system not only possessed good recycling performance, wide pH adaptation and relatively low activation energy, but also had high resistance to environmental interference. Singlet oxygen (¹O₂) dominated non-radical process was responsible for phenol degradation rather than traditional radical pathways. Impressively, the doping level of Fe could regulate FeN_x contents in catalysts, and the catalytic activity of xFe‒N‒C was greatly enhanced with increasing FeN_x contents. Based on density functional theory calculations (DFT), the introduction of FeN_x sites regulated the electronic structure of catalysts. Such electron-deficient Fe center acted as electron acceptor to receive electrons transmitted by the adsorbed PMS, thus generating highly reactive ¹O₂ for rapid phenol oxidation. This work provides a new insight into the innovation in transition metal-nitrogen hybrid carbon catalysts and highlights the pivotal roles of FeN_x sites in ¹O₂ generation during PMS activation process.

Dual-Active Sites Engineering of N-Doped Hollow Carbon Nanocubes Confining Bimetal Alloys as Bifunctional Oxygen Electrocatalysts for Flexible Metal-Air Batteries

Since the sluggish kinetic process of oxygen reduction (ORR)/evolution (OER) reactions, the design of highly-efficient, robust, and cost-effective catalysts for flexible metal-air batteries is desired but challenging. Herein, bimetallic nanoparticles encapsulated in the N-doped hollow carbon nanocubes (e.g., FeCo-NPs/NC, FeNi-NPs/NC, and CoNi-NPs/NC) are rationally designed via a general heat-treatment strategy of introducing NH₃ pyrolysis of dopamine-coated metal-organic frameworks. Impressively, the resultant FeCo-NPs/NC hybrid exhibits superior bifunctional electrocatalytic performance for ORR/OER, manifesting exceptional discharging performance, outstanding lifespan, and prime flexibility for both Zn/Al-air batteries, superior to those of state-of-the-art Pt/C and RuO₂ catalysts. X-ray absorption near edge structure and density functional theory indicate that the strong synergy between FeCo alloy and N-doped carbon frameworks has a distinctive activation effect on bimetallic Fe/Co atoms to synchronously modify the electronic structure and afford abundant dual-active Fe/Co-N_x sites, large surface area, high nitrogen doping level, and conductive carbon frameworks to boost the reversible oxygen electrocatalysis. Such N-doped carbon with bimetallic alloy bonds provides new pathways for the rational creation of high-efficiency energy conversion and storage equipment.

Highly Accessible Atomically Dispersed Fe-N x Sites Electrocatalyst for Proton-Exchange Membrane Fuel Cell

Atomically dispersed transition metal-N x sites have emerged as a frontier for electrocatalysis because of the maximized atom utilization. However, there is still the problem that the reactant is difficult to reach active sites inside the catalytic layer in the practical proton exchange membrane fuel cell (PEMFC) testing, resulting in the ineffective utilization of the deeply hided active sites. In the device manner, the favorite structure of electrocatalysts for good mass transfer is vital for PEMFC. Herein, a facile one-step approach to synthesize atomically dispersed Fe-N x species on hierarchically porous carbon nanostructures as a high-efficient and stable atomically dispersed catalyst for oxygen reduction in acidic media is reported, which is achieved by a predesigned hierarchical covalent organic polymer (COP) with iron anchored. COP materials with well-defined building blocks can stabilize the dopants and provide efficient mass transport. The appropriate hierarchical pore structure is proved to facilitate the mass transport of reactants to the active sites, ensuring the utilization of active sites in devices. Particularly, the structurally optimized HSAC/Fe-3 displays a maximum power density of up to 824 mW cm-2, higher than other samples with fewer mesopores. Accordingly, this work will offer inspirations for designing efficient atomically dispersed electrocatalyst in PEMFC device.

Fabrication of Bioresource-Derived Porous Carbon-Supported Iron as an Efficient Oxidase Mimic for Dual-Channel Biosensing

Herein, we designed a new strategy for fabricating a renewable bioresource-derived N-doped hierarchical porous carbon-supported iron (Fe/NPC)-based oxidase mimic. The obtained results suggested that Fe/NPC possessed a large specific surface area (1144 m²/g) and pore volume (0.62 cm³/g) to afford extensive Fe-Nx active sites. Taking advantages of the remarkable oxidase-mimicking activity, outstanding stability, and reusability of Fe/NPC, a novel dual-channel biosensing system was strategically fabricated for sensitively determining acetylcholinesterase (AChE) through the integration of Fe/NPC and fluorescent silver nanoclusters (AgNCs) for the first time. The limits of detection for AChE can achieve as low as 0.0032 and 0.0073 U/L by the outputting fluorometric and colorimetric dual signals, respectively. Additionally, this dual-signal system was applied to analyze human erythrocyte AChE and its inhibitor with robust analytical performance. This work provides one sustainable and effective avenue to apply a bioresource for fabricating an Fe/NPC-based oxidase mimic with high catalytic performance and also gives new impetuses for developing novel biosensors by applying Fe/NPC-based enzyme mimics as substitutes for the natural enzyme.

CoPd Nanoalloys with Metal-Organic Framework as Template for Both N-Doped Carbon and Cobalt Precursor: Efficient and Robust Catalysts for Hydrogenation Reactions

In this work, a series of metal-organic framework (MOF)-derived CoPd nanoalloys have been prepared. The nanocatalysts exhibited excellent activities in the hydrogenation of nitroarenes and alkenes in green solvent (ethanol/water) under mild conditions (H₂ balloon, room temperature). Using ZIF-67 as template for both carbon matrix and cobalt precursor coating with a mesoporous SiO₂ layer, the catalyst CoPd/NC@SiO₂ was smoothly constructed. Catalytic results revealed a synergistic effect between Co and Pd components in the hydrogenation process due to the enhanced electron density. The mesoporous SiO₂ shell effectively prevented the sintering of hollow carbon and metal NPs at high temperature, furnishing the well-dispersed nanoalloy catalysts and better catalytic performance. Moreover, the catalyst was durable and showed negligible activity decay in recycling and scale-up experiments, providing a mild and highly efficient way to access amines and arenes.

Borophene-supported single transition metal atoms as potential oxygen evolution/reduction electrocatalysts: a density functional theory study

Due to the maximal atom utilization, high activity, and selectivity, the two-dimensional (2D) matrix supported single-atom catalysts (SACs) have attracted substantial research interests. In this work, we carried out the theoretical study on the stability, activity for oxygen evolution reaction (OER) and oxygen reduction reaction (ORR), and its dependence on the electronic structure of transition metal (TM) anchored on two types of borophene (called β₁₂ and χ₃) by density functional theory (DFT) calculations. The results show that the early- and VIII-TM anchored β₁₂ and χ₃ borophenes are structurally and thermodynamically stable. The overpotentials of OER (η^OER) over the Ni supported on β₁₂ and χ₃ borophene SACs, designated as β₁₂-Ni and χ₃-Ni, are 0.38 and 0.35 V, respectively. The η^ORR of β₁₂-Ni and χ₃-Ni are estimated to be as low as 0.34 and 0.39 V, respectively. The OER/ORR activity of the SACs can be well correlated with their electronic structures. The high η^OER values of early TM supported on borophene SACs correspond to high d-band center of TM. Both β₁₂-Ni and χ₃-Ni have a moderate d-band center. Since the overpotentials for OER and ORR on β₁₂-Ni and χ₃-Ni are comparable to those of Pt group metals and their oxides, β₁₂-Ni and χ₃-Ni can be considered as the promising bifunctional catalysts for OER and ORR.

Atomic/molecular layer deposition for energy storage and conversion

Energy storage and conversion systems, including batteries, supercapacitors, fuel cells, solar cells, and photoelectrochemical water splitting, have played vital roles in the reduction of fossil fuel usage, addressing environmental issues and the development of electric vehicles. The fabrication and surface/interface engineering of electrode materials with refined structures are indispensable for achieving optimal performances for the different energy-related devices. Atomic layer deposition (ALD) and molecular layer deposition (MLD) techniques, the gas-phase thin film deposition processes with self-limiting and saturated surface reactions, have emerged as powerful techniques for surface and interface engineering in energy-related devices due to their exceptional capability of precise thickness control, excellent uniformity and conformity, tunable composition and relatively low deposition temperature. In the past few decades, ALD and MLD have been intensively studied for energy storage and conversion applications with remarkable progress. In this review, we give a comprehensive summary of the development and achievements of ALD and MLD and their applications for energy storage and conversion, including batteries, supercapacitors, fuel cells, solar cells, and photoelectrochemical water splitting. Moreover, the fundamental understanding of the mechanisms involved in different devices will be deeply reviewed. Furthermore, the large-scale potential of ALD and MLD techniques is discussed and predicted. Finally, we will provide insightful perspectives on future directions for new material design by ALD and MLD and untapped opportunities in energy storage and conversion.

Graphene-supported single-atom catalysts and applications in electrocatalysis

Supported metal nanostructures are the most extensively studied heterogeneous catalysts, benefiting from easy separation, regeneration and affordable cost. The size of the supported metal species is one of the decisive factors in determining the activity of heterogeneous catalysts. Particularly, the unsaturated coordination environment of metal atoms preferably act as the active centers, minimizing these metal species can significantly boost the specific activity of every single metal atom. Single-atom catalysts/catalysis (SACs), containing isolated metals atomically dispersed on or coordinated with the surface of a support material, represent the ultimate utilization of supported metals and maximize metal usage efficiency. Graphene, a two-dimensional star material, exhibiting extraordinary physical and chemical properties, has been approved as an excellent platform for constructing SACs. When atomically dispersed metal atoms are strongly anchored on the graphene surface, featuring ultra-high surface area and excellent electronic properties, SACs offer a great potential to significantly innovate the conventional heterogeneous catalysis, especially in the field of electrocatalysis. In this review, a detailed discussion of graphene-supported SACs, including preparation approaches, characterization techniques and applications on typical electrocatalytic reactions is provided. The advantages and unique features of graphene-supported SACs as efficient electrocatalysts and the upcoming challenges for improving their performance and further practical applications are also highlighted.